To test:
1. Configure Claims returned
1. Go to Administration > Authorized Values > LOST
2. Add a new authorized value with value:6 and description:Claims returned
3. Go to Administration > System Preferences
4. Set ClaimReturnedLostValue to 6 and save
2. Check out an item to a patron.
1. Mark the item as claim returned
2. Check the item in.
3. A message stating that the item has been claimed as returned pops up with
an option to resolve.
4. Resolve the claim.
3. Check out the item to the patron again.
1. Mark the item as claim returned.
2. Check out the item to a new patron. Select “Yes, check out”
3. Go back to the previous patron. Notice that their claim was not resolved.
4. Apply the patch.
1. Updatedatabase
2. restart_all
3. Go to the system preferences and set the system preference
‘AutoClaimReturnStatusOnCheckin’ to ‘Returned by patron’
4. Set ‘AutoClaimReturnStatusOnCheckout’ to ‘Found in library’
5. Redo step 2
1. When checking the claim returned item in you will now see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Returned by patron’
6. Redo step 3
1. Upon checking the item out to another patron you will see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Found in library’.
7. Sign off and have a wonderful day!
Sponsored-by: Altadena Library District
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch implements two new system preferences, "UpdateItemLostStatusWhenWriteOff" and "UpdateItemLostStatusWhenPaid" that allow you to specify the status to change an item to when the outstanding balance of a lost item is paid or written off. These preferences are tied to the LOST authorised values set.
Test Plan:
- Set one of the system preference to any of the available values
- Set an item as lost
- Make a manual invoice for your desired user and assign it to the barcode of the above item
- Save and Pay
- Select Pay/Write Off depending on the system preference you selected above
- Pay
- Note that the status of the item has changed to the status you set with the system preference
- Repeat for all values of both system preferences
- Check that when the system preference is left blank and no option is chosen, the lost status does not update.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the database schema to ensure
bookings.pickup_library_id is NOT NULL
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Cuyahoga County Public Library
Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com>
Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Cuyahoga County Public Library
Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com>
Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
With the next iteration of HTML::FromANSI::Tiny we can add our own subclass
to map ANSI strings to Bootstrap classes.
This patch adds a local lib HTML::FromANSI::Tiny::Bootstrap module to
do said mapping and then uses it in the installer.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the tickets and ticket_updates tables to include a
assignee_id.
Signed-off-by: Paul Derscheid <paulderscheid@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
These patches allow the display of checkboxes instead of radio buttons for placing specific
item holds in the OPAC and staff interface. This display is controlled by the system preference
'DisplayMultiItemHolds'. When disabled, the hold display is the same as in the past. When enabled,
the user can select multiple items to place holds on at the same time.
If there is an error placing one or more holds, an error will display on the following screen.
Test plan:
0. Apply the patches and koha-plack --reload kohadev
1. Enable 'DisplayMultiItemHolds' syspref
2. In staff interface, go to a record with multiple holdable items
3. Check the boxes next to 2+ items and click the button to place the holds
4. Note that the holds are all placed (unless there is a failure)
5. Cancel the holds, and try again (but this time make Holds per record (count) only
1 in the circ rules)
6. Note that one of the holds is placed, but the others are not and an error message
is displayed saying that one or more holds could not be placed because the holds per
record was exceeded
7. Perform the same above procedure on the OPAC
8. If DisplayMultiPlaceHold is enabled, you can test placing multiple specific item holds
across multiple bibs in the OPAC via the search results
9. If EnableItemGroups and EnableItemGroupHolds is enabled, you can test that you can
either place item group holds or specific item holds. Toggling the checkboxes in the
staff interface will uncheck the item group hold radio button.
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
* Change to kohastructure.sql for new installations
* Atomic database update to add the column for updating
installations
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We copy them here to another (temporary) table.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Run dbrev. Check if field is no longer there.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Ray Delahunty <lib-systems@arts.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new TICKET_STATUS authorized value category as well as
adding the new 'status' field to both 'tickets' and 'ticket_updates'
tables.
Signed-off-by: Esther Melander <esther@bywatersolutions.com>
Signed-off-by: Ray Delahunty <lib-systems@arts.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We can know add/remove homelibrary and holdinglibray from the config
page, this syspref is no longer needed for ES
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We want the label from the DB displayed on the UI so we are adjusting
the yaml and the DB.
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Matthias Le Gac <matthias.le-gac@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
I felt the switch to multi in the EmailFieldPrimary preference was a bit
confusing given that type exposes a 'select all' option which doesn't
make sense with the pre-existing 'first valid' option being an override
in the code.
This patch opts to switch it back to 'Choice', meaning that only one
option can be picked and adds a 'selected addresses' option which
prompts the use of a new 'EmailFieldSelection' preference which allows
for the multi-select as before.
To test:
1) Run though the test plan for 'Update notice_email_address method to
return a list' but with the following ammendments:
* 2) As aposed to being able to select multiple options under
EmailFieldPrimary, you should now only be able to select one option at
a time, but a new 'selected addresses' option should be present.
* 8) Select the 'selected addresses' option for 'EmailFieldPrimary' and
also select multiple fields for the new 'EmailFieldSelection'
preference.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Axelle Clarisse <axelle.clarisse@univ-amu.fr>
Signed-off-by: Mathieu Saby <mathsabypro@gmail.com>
Signed-off-by: Aleisha Amohia <aleisha@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds geosearch to Koha (using Elasticsearch 7). ElasticSearch
search_mappings get new types to store lat/lon, which can be indexed
from MARC 034$s and 034$t. There is a small change to the DB to allow a
new value in search_field.type ENUM.
The QueryBuilder is extended to allow for building advanced
ElasticSearch Querys (eg geo_distance) that cannot be represented in a
simple string query. The UI for searching (including showing the results
on a OSM/Leaflet map) is implemented in a separate plugin
(https://github.com/HKS3/HKS3GeoSearch)
Test Plan:
* make sure you're running ElasticSearch 7
(eg via `curl http://es:9200?pretty | grep number`)
* apply patch
* got to a Framework, check Editor for 034$s and 034$t and save
* got to some books (in the correct framework) and enter some lat and lon into 034$s and 034$t (for example lat=48.216, lon=16.395)
* Run the elasticsearch indexer, maybe limited on the books you edited (-bn 123 -bn 456):
misc/search_tools/rebuild_elasticsearch.pl -b -v
* You can check if the indexing worked by inspecting the document in elasticsearch:
* get the biblionumber (eg 123)
* curl http://es:9200/koha_kohadev_biblios/_doc/123?pretty | grep -A5 geolocation
* You should get back a JSON fragment containing the lat/lon you stored
* You can query elasticsearch directly:
* Run the following curl command, but adapt the value for lat/lng and/or the distance (in meters)
* curl -X GET "http://es:9200/koha_kohadev_biblios/_search?pretty" -H 'Content-Type: application/json' -d '{"query": {"bool":{"must":{"match_all":{}},"filter":{"geo_distance":{"distance":100000,"geolocation":{"lat":48.2,"lon":16.4}}}}}}'
* To run the search via Koha, you need to either install and use https://github.com/HKS3/HKS3GeoSearch or create a handcrafted query string:
* handcrafted query string:
* /cgi-bin/koha/opac-search.pl?advsearch=1&idx=geolocation&q=lat:48.25+lng:18.35+distance:100km&do=Search
* HKS3GeoSearch
* install the plugin and enable it
* got to OPAC / Advanced Search
* There is a new input box "Geographic Search" where you can enter lat/long/radius
* On the search result page a map is shown with pins for each found biblioitem
Sponsored-by: ZAMG - Zentralanstalt für Meterologie und Geodynamik, Austria - https://www.zamg.ac.at/
Sponsored-by: Geosphere - https://www.geosphere.at/
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Additional finetuning:
- Fix update and remove fixed fixme
- Update test count as well
- fix last small issues raised in Comment 23
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Save format settings for an individual notice, or for all notices
This patch implements a single style field for a slip to allow for advanced CSS customisation of printed notices. There are links to insert selectors as helpers. Styles can be applied for an individual notice, or all notices.
To test:
1. Apply the patches, install database updates, update schema if needed, and restart services
2. Go to Tools -> Notices and slips
3. Edit any notice
4. Go to the Format tab
5. Confirm there is a textarea for CSS, and links to insert helpful selectors for IDs like #receipt and #slip
6. Add some CSS and confirm it saves.
7. Test that 'apply these settings to all notices' option works. Test the confirmation box appears when this is checked.
8. Add a new notice and confirm CSS settings save successfully
9. The subsequent patches have specific testing plans for each printable notice. For each, confirm that SlipCSS stylesheet changes are applied first. Specific notice styles should be applied last.
10. Test with a non-HTML notice as well, such as RECALL_REQUESTER_DET. Plain (non_HTML) notices have always come with <pre> tags around them so the text is formatted slightly differently but any CSS from SlipCSS or the notice Format should still hold.
Sponsored-by: Colorado Library Consortium
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: ByWater Solutions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
