Test Plan:
1. Go to Administration
2. Go to System Preferences
3. Find 'opaclanguages' (note the lack of capitalisation)
4. Apply patch
5. Repeat step 1 and 2
6. Find 'OPACLanguages' (note the use of capitalisation)
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds sql calls to disable foreign key checks for the initial
kohastructure schema load and then re-enables them again for subsequent
actions.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Prior to this patch we had a confusing situation, mandatory files were
in both installer/data/mysql and installer/data/mysql/mandatory
To make things clearer this patch move them all into the mandatory
subdir.
However kohastructure.sql stay in the "root" directory.
Test plan:
1. Drop and recreate your DB and use the installer to populate the DB
2. Use the merge request code from misc4dev to test the reset_all alias
3. Still with the merge request from misc4dev checkout master (you can
also try 19.11 and/or 19.05) and reset_all again
=> All the data from the SQL mandatory files must have been correctly
inserted into the DB
https://gitlab.com/koha-community/koha-misc4dev/-/issues/46
Note that this patch also remove the x flag for subtag_registry.sql
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It adds a new localization directory that could
host a custom SQL file for each language,
xx-YY/custom.sql
This will be the last file to be loaded at
install time, it can be used to set any difference
from default values.
It can't be deselected at install time.
Moved corresponding files for de-DE, it-IT,
nb-NO and completed es-ES
To test:
1) Apply the patch
2) Install es-ES/de-DE/it-IT/nb-NO translation (any lang)
( cd misc/translation; ./translate install es-ES )
3) Do a clean install using es-ES
4) After all files have been loaded check:
* A new section labeled "Localization data added"
with one file, custom.sql
* Inspect the value of FrameworksLoaded syspref,
last entry must be custom.sql
5) Remove/rename the file or localization dir and
repeat 3/4, install must proceed normally
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
For the following SQL query:
INSERT INTO cities(city_name, city_country) VALUES ('Madrid', 'Spain'), ('Buenos Aires', 'Argentina');
We move from:
[ 'Madrid', 'Spain', 'Buenos Aires', 'Argentina' ]
to:
[ [ 'Madrid', 'Spain' ], [ 'Buenos Aires', 'Argentina' ] ]
Which make more sense to split, build and construct the queries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch set 'languages' and 'opaclanguages' system
preferences with the language used during install.
To test:
1. Apply the patch
2. Do a clean install in a language other than english
3. Verify that 'languages' and 'opaclanguages' system
preferences show the language code used during install,
besides english.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Since bug 13897 we are using YAML file to store the installer data.
We are generating/executing 1 query per row, which is much more slower than before.
We should generate 1 query per table to get back to the previous execution time.
With this patch we are going to generate a single one big SQL query per
table.
Test plan:
1/ Checkout a commit before bug 13897:
git checkout -b before_13897 0706922221
2/ Execute the following commands (several times, to get a median!):
mysql -h db -u koha_kohadev -ppassword -e"DROP DATABASE koha_kohadev";
mysql -h db -u koha_kohadev -ppassword -e"CREATE DATABASE koha_kohadev";
koha-shell -p -c "perl benchmark_installer.pl sql" kohadev;
Note the different times displayed in the output, especially the first 2
installer/data/mysql/en/marcflavour/marc21/mandatory/authorities_normal_marc21.yml
installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml
They are the number of seconds took to insert them
3/ checkout master
git checkout -B master origin/master # Will reset your master branch!
4/ Execute the previous commands but without the 'sql' parameter passed
to the benchmark script
mysql -h db -u koha_kohadev -ppassword -e"DROP DATABASE koha_kohadev";
mysql -h db -u koha_kohadev -ppassword -e"CREATE DATABASE koha_kohadev";
koha-shell -p -c "perl benchmark_installer.pl" kohadev;
Note the different times.
5/ Apply this patch and retry 4
Please post the execution times when you signoff on this patch.
Spoiler: total time goes from 21s to 4s.
marc21_framework_DEFAULT.yml from 12s to .5s
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
My numbers, 99.99% confidence
3.906 ±0.252 SQL files
15.516 ±0.772 YAML wo/patch
3.324 ±0.193 YAML w/patch
Very good!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch enable the translation of the
labels 'Mandatory' or 'Optional' present at install time
for groups of installer files.
To test:
1) Try install using de-DE language,
at step3 verify 'Mandatory' and 'Optional'
labels for marc21 or other data checklist
Do not close this window!
2) Apply this patch
3) Update de-DE translation files, reinstall lang files
cd misc/translator
./translate update de-DE
./translate install de-DE
4) Reload page at step3, now 'Mandatory' label
is translated to 'Pflichtfeld'
5) Verify strings in translation file
Search for
^msgid \"Mandatory\"
^msgid \"Optional\"
in po/de-DE-staff-prog.po.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We have some column's names that need to be surrounded by ` as they are
protected keywords ('rows' for instance)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds 3 features:
1) Display description of YAML files at install time
for frameworks, and fixes it's encoding.
2) Enable use of multiline values, field required
3) Process SQL statements declared in YAML files
With this features we can process files with the
following generic YAML strucure:
---
description:
- "File description"
tables:
- table_name:
translatable: [ title, content ]
multiline: [ content ]
rows:
- title: "Example title"
content:
- "Content:"
- ""
- "This is the content."
id: 1
value: ~
sql_statements:
- "UPDATE table_name SET value ='empty' WHERE value IS NULL"
...
* file description is now inside the YAML, can have multiple
lines.
This attribute is expected in all YAML files.
* translatable attribute in table declare fields that can be
translated
* multiline attribute in table declare fields that can have
multiple lines of content, they are joined using '\r\n'
before insert into database.
This is useful to express fields like 'news' content, and
to simplify it's translation.
'\r\n' is used for correct display in Windows clients.
* sql_statements allows to add multiple SQL sentences, not
insertions normally, that are executed in order.
This features are not needed for the example file of this patch,
but will be used in new bugs.
To test:
1) Use the same test plan of first patch.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies C4/Installer.pm to add support
for loading YAML files into database.
As an example of the functionality, optional
auth_val.sql file is replaced by auth_val.yml
The rationale behind this feature is to enable the
translation of the data that is loaded into the
database. That will be addressed in another bug.
But taking into account that goal, translatable
values are declared in the YAML files, to ease
identification by translate script.
Also file description is moved into the yaml
file.
To test:
0) Do a clean install with all optional data,
then dump authorised_values table, reserve.
1) Apply the patch
2) Do a clean install in English (marc21/unimarc)
3) On optional data check for description of auth_val
"Some basic default authorised values for ..."
4) Select all optional data
5) Finish installation
6) Dump again authorised_values table and compare with that
of point '0'.
No differences should be found.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
cpanfile is a format for describing CPAN dependencies for Perl
applications.
It is more concise - thus easier to read and maintain - than
C4::Installer::PerlDependencies, and allows to describe requirements
more accurately (using version ranges or features for instance)
Additionally it can be read by tools such as cpanm or carton for an
easy way to install dependencies on non-Debian-based systems.
For more information on cpanfile, see
http://search.cpan.org/~miyagawa/Module-CPANfile-1.1002/lib/cpanfile.pod
This patch replace C4::Installer::PerlDependencies by an equivalent
cpanfile and update all scripts/modules that were using PerlDependencies
It also removes dead code from C4::Installer::PerlModules (some
subroutines were not used at all, except in unit tests)
Added dependencies:
- Module::CPANfile
- CPAN::Meta (dependency of Module::CPANfile, but we need a more recent
version than the one Module::CPANfile requires)
Test plan:
1. Go to About page, tab Perl modules and keep this browser tab open
2. Apply patch
3. Install Module::CPANfile and CPAN::Meta
a. On Debian-based systems:
# will install libcpan-meta-perl as a dependency
sudo apt install libmodule-cpanfile-perl
b. Others:
# will install CPAN::Meta as a dependency
sudo cpanm Module::CPANfile
4. In a new browser tab, go to About page, tab Perl modules and compare
the table with the one in the previous browser tab
They should be identical, except for newly added dependencies
(Module::CPANfile and CPAN::Meta)
5. Do a 'standard' install
a. perl Makefile.PL (select 'standard')
b. make
c. sudo make install
d. Configure your database, web server, ... and go through the web
install process
6. Verify that the cpanfile got copied into PERL_MODULE_DIR (which
should be /usr/share/koha/lib)
7. Go to the about page of this fresh install and compare it with your
dev install
8. Verify that debian/list-deps still works
This takes a lot of time and it may not be necessary to wait until
the end. If you see some Debian package names that correspond to
modules in cpanfile, it means it still works
(you need apt-file for this script to work)
9. Verify that koha_perl_deps.pl still works
10. prove t/Installer_pm.t t/Installer_PerlModules.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Back up your DB if you want to save it
2 - sudo koha-mysql kohadev
DROP database koha_kohadev;
CREATE database koha_kohadev;
3 - http://localhost:8081
4 - Go through the web installer
5 - Enable AdvancedCatalogingEditor
6 - Try to load it, fails with JS console error: insert_copyright is not defined
7 - Apply patch
8 - Repeat
9 - This time editor loads
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The 3 following files must be mandatory and insert during the install process:
- message_transport_types.sql
- sample_notices_message_attributes.sql
- sample_notices_message_transports.sql
They insert data for
- message_transport_types
- message_attributes
- message_transport_type
Otherwise the notice templates (table letter) will fail.
Moreover these 3 files are identical and are put in several places (1 per language)
to make the description translatable (using the related .txt file)
Test plan:
- Install Koha in English and in another language
- Select all the sample data
=> They all should be inserted correctly
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
On the way we move TableExists to C4::Installer, where it belongs to.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is a follow-up patch for bug 14048 comment 97
Test plan:
git grep refund_lost_item_fee_rules.sql
should not return any results
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The step to install optional/mandatory things is broken with
many <br />'s instead of line breaks.
TEST PLAN
---------
1) Back up database
2) Drop database
3) Create empty database
4) Run web installer
-- Notice that step 3 has ugly <br />'s at the last
part of step 3.
5) Apply patch
6) Repeat steps 2-4
-- Notice the <br />'s are now nice line breaks.
NOTE: No promises of perfect positioning!
7) Run koha qa test tools.
Joubu: I have no idea if this is still needed. TO TEST
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=13618
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Resolve warning:
Use of uninitialized value in string eq at C4/Installer.pm line 79.
Test plan:
Add a trivial .sql file in atomicupdate (comment is sufficient).
Run updatedatabase.pl
Without the patch you have the warning.
Apply the patch and repeat (no warning).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
In summary, changes are:
1) If you have chosen MySQL, Makefile.PL will ask you if you want TLS (default:
"no"), and then the locations for CA cert, client cert and client key
(reasonable defaults are provided). Settings <tls>, <ca>, <cert> and <key> are
added in koha-conf.xml
2) If <tls>yes</tls> in koha-conf.xml, the installer and database connection
scripts add the TLS options in both DBI connection strings and mysql command
line
To test
1/ Apply patch
2/ Check everything still works and db connections are the same as before
3/ Either run Makefile.PL and step through the options or edit your koha-conf.xml to
enable TLS
4/ Check db connections are still working
Patch provided to me by Dimitris Kamenopoulos and I reformatted it into a git patch,
any errors are probably mine
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the previous patch we use the constraint_exists subroutine to verify
if an index or a foreign key exists.
But the `SHOW INDEX` query does not return foreign keys (as its name
suggests!).
We need another subroutine foreign_key_exists to check the FK existence.
I have found that because t/db_dependent/TestBuilder.t fails on
oai_sets_biblios, because oai_sets_biblios_ibfk_1 has not been removed.
Test plan:
0/ Do not apply this patch
1/ Use a 3.20 DB
2/ update the DB
3/ SHOW CREATE TABLE oai_sets_biblios
will display oai_sets_biblios_ibfk_1
Apply the patch and repeat 1, 2, 3
=> Will not display oai_sets_biblios_ibfk_1
It has been removed as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This way it will get used for any languages.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch introduces new classes for handling refund lost item fee
rules. It introduces a new table for storing this rules.
It is designed so it is possible to define a global rule, and then
branch-specific ones. The specific is prefered if available.
This behaviour is fully tested by unit tests introduced by the following patches.
This cannot be tested on its own.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch redirect STDERR to a variable to retrieve the errors raised
by the DBMS when loading a sql file, it could be useful to debug errors.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
It's better of course, trying to load a failed fiel
it outputs mysl errors
DBD::mysql::st execute failed: You have an error in your SQL syntax...
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch prevents crashing in case an
error is detected when loading a file
To test:
1) Apply patch
2) Mangle kohastructure.sql or any sample
file adding and invalid SQL line
3) Run webinstaller and check that the error
is handled gracefully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alternative POC solution, on top of
previous patches, feel free to obsolte.
This patch use DBIx::RunSQL->run_sql_file
to procees each sql file.
To test:
1) Apply all patches
2) Same test plan of patch 1
Timing test running web installer, marc21,
all sample data, time in seconds
a) without patch
structure data
59.7 66.5
58.6 66.0
b) SQL::SplitStatement (patch 1+2)
59.4 101
59.7 102
c) DBIx::RunSQL (patch 3)
60.7 66.8
59.4 66.2
Tomas' version is a bit slower loading sample data,
all give similar results processing kohastructure.
New dependency to package: DBIx::RunSQL
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes C4::Installer::load_sql so it uses File::Slurp [1] to read
the SQL files, and SQL::SplitStatement to extract the statements from the full SQL
file so they can be passed to $dbh->do.
To test:
- On Mysql 5.5, run the webinstaller
=> SUCCESS: Everything works as expected
- Apply the patch
- Run
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> SUCCESS: Everything works as expected
- On Mysql 5.6+ (5.7 is implied)
- Run
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> FAIL: It cannot load the sql files due to a password-in-command-line error
- Apply the patch
- Make sure everything is clean (it should):
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> SUCCESS: EVerything works as expected
- Sign off :-D
[1] Note: This is a POC patch, in the sense that it does the job, fixes a nasty problem
but using File::Slurp to load the SQL files in memory comes with a big runtime penalty.
You will notice the install procedure is now much slower, for instance.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Move the 2 specific 'en' files outside of the language directory.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
See the wiki page for the explanation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes subtag_registry.sql from lang dirs,
and put it on a new mandatory dir
In that way we need to update only one file.
All similar files are removed.
To test:
1) Try a new install, or simply create a new database,
grant permissions on it, change koha-conf.xml to use
this database and go to staff page
2) Go step by step until all mandatory or optional sql
files are loaded. Check that subtag_registry.sql is
loaded.
3) Do it again but on other language. First install
translation and repeat 2), could use de-DE or fr-FR
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested with de-DE.
Thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The routines sql_file_list and marcflavour_list in Installer.pm are not used.
There are some references to them in probably obsolete '/lib' test units.
I changed these test units for the record too.
Also: removed the not-existing marcflavour parameter of sample_data_sql_list
in its call in install.pl.
Test plan:
Run a new install.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, if you install the Norwegian translations and run
through the web installer in Norwegian, choosing NORMARC as you
marcflavour, the marcflavour syspref is set to MARC21.
To test:
- Apply the patch
- Install nb-NO
- Run through the web installer, choosing nb-NO as the language
- Choose NORMARC as the MARC dialect
- When the web installer is done, check the value of the
marcflavour syspref. It should be NORMARC, not MARC21.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Did a regression test installing UNIMARC too.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch use DataTable, see BUG|BZ 6836
- css/datatables.css
- lib/jquery/plugins/jquery.dataTables.min.js
- js/datatables.js
http://bugs.koha-community.org/show_bug.cgi?id=7167
Bug 7167 follow-up
Major changes:
* creating database tables for update on the fly, the 1st time the update script is called
* version is checked on mainpage.pl (and here only). If syspref Version differ from kohaversion.pl, the old updatedatabase is launched. If there are updates missing from new mechanism, the updatedatabase page is reached
* kohaversion check on each page is now useless in Auth.pm, removed dead code
* Updated installer: at the end of the process, retrieve all updates and automatically mark them "OK", as they're included in installer
Minor changes:
* adding copyright
* adding poddoc
* updating a warning, for better clarity
* switching from $$var to $var->
* small TT glitch fixed in updatedatabase.tt
* about.pl now returns the Version systempreference PLUS all the patches that have been applied
Bug 7167 follow-up perlcritic & numbers display & partial apply depending on DEBUG
* add use strict to updatedatabase, that is now perlcritic compliant
* partial apply of DB revs is now managed by DEBUG env variable = if DEBUG=0, the user can just apply every DBrev. If DEBUG=1, we're in a dev env, the user know has the option to apply DBrevs one by one
Display:
* in updatedatabase, small spelling changes
* in about.pl, remove 0 just after . (3.06.01 is displayed as 3.6.1)
* improve the display of applied numbers on about.pl
- before this patch, if you have N, N+1, N+2, N+3 and N+10 DB rev applied, about was displaying : , N+1 / N+2 / N+3 / N+10
- after this patch you have N......N+3 / N+10
* add ORDER BY into list_versions_already_knows to have number retrieved in the same order whatever the order they are applied
http://bugs.koha-community.org/show_bug.cgi?id=6679
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve the update.pl script
* Added CLI options to update.pl
* Call update.pl from the installer.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Now, we check versions on mainpage.pl and after login
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Reimplementing Marcel's suggestions & fixes
* Fixing the bugguy old version check (that was made against 3.0900000 instead of 3.0900027 -the last current kohaversion number
* in the CLI script, if there is nothing to report, just say it
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7167: Remove check_coherency
As suggested by Katrin, we've removed the call to check_coherency. It intended to provide readable comments when some SQL was wrong. Removing this sub result in the SQL error being displayed. That's OK because the sysadmin or the developer can google the error, understand it, then fix it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Changing in .sql parsing
We first split on delimiter and then extract comments. You can now put
\n for delimiter comments.
ex:
DELIMITER ;
-- this is a comment
SELECT * FROM my_table;
-- another comment
Before this patch, we had to write:
DELIMITER ;
-- this is a comment;
SELECT * FROM my_table;
-- another comment;
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve display + factorize get_queries
Despite it's size, this patch is dealing with display questions only:
* The text "comments" and "queries" was hardcoded in ajax-updatedb-getinfo.pl script. It has been replaced by a JSON call, returning 2 separate values, "comments:" and "queries:" is now in the template, making it translatable
* Some minor tweak in the display (like putting things in bold, displaying OK in green, warnings in yellow and KO in red)
* Reordering the column headers for more readability:
* Status column is merged with availability, column is after status
* Status/availability terms more clear: "Not applied" instead of "unknown", "Applied and OK", "Applied and failed", "Applied and forced" are the 3 other statuses
* Removed one click to display comments on DBREv not yet applied: before the patch, one had to click "Show details", then "Get comments", now, "Get comments" is enough
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX typos & moving a script to a proper place
* renamed availables to available
* renamed already_knows to already_applied
* fixed FSF & copyright headers
* removing a "use strict" because we already had use Modern::Perl
* fixed a tiny typo in about.tt
* moving update.pl to misc/bin because it's a CLI script
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add dependency File::Find::Rule
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: We want to execute non-numeric version with the -all option
Dealing with Marcel comment 100:
> Note that the current code around line 52/53 does not
> handle that correctly:
> Argument "\x{74}\x{65}..." isn't numeric in numeric ge (>=) at
> installer/data/mysql/update.pl line 52.
Now, a non-numeric DBRev will be applied if you provide the --all parameter, without throwing the error
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 reindentation & removing dead code
* The if (! defined $ENV{PERL5LIB}... block was wrongly intented
* The 3 lines running update.pl are useless: the update (new mechanism) is run from admin/updatedatabase.pl script. This part of install.pl is run only when you have "old style" DB revisions.
Summary:
* old mechanism = it's run as previously, by reaching the installer/install.pl?step=3 page, that applies all revisions
* new mechanism = when you log-in or reach mainpage.pl, you reach admin/updatedatabase.pl, where you can see what will be run, and run it
Tiny side effect = the check for old mechanism is now done *after* authentification (thus it's not done on each page call). It means that the user will have to enter login/password twice :
* first to log-in to Koha
* second to run installer/updatedatabase.pl?step=3
As the old mechanism is deprecated, we can expect this will happend only a few time in the history of a setup, it's not a big deal.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Don't raise an error in routine TableExists
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX merge
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 follow-up fix POD syntax to please koha-qa.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- Bareword file handle opened at line 157, column 13. See pages 202,204 of
PBP. (Severity: 5)
- I/O layer ":utf8" used at line 157, column 13. Use ":encoding(UTF-8)" to get strict validation. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://perldoc.perl.org/functions/open.html
open(my $fh, "<:encoding(UTF-8)", "filename")
|| die "can't open UTF-8 encoded filename: $!";
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
