This patch ensures HoldFeeMode is considered when displaying a message
to patrons on the OPAC that says they'll be charged a hold fee when
placing or collecting the hold.
When HoldFeeMode is set to not_always or "only if all items are checked
out and the record has at least one hold already" then the hold fee
message should only show if all items on the record are checked out, AND
the record has at least one hold already - both of these conditions must
be met.
To test:
1. Go to Administration -> Patron categories
2. Edit your patron category and give a hold fee of $1.
3. Go to Administration -> System preferences and search for
HoldFeeMode. Set to 'only if all items are checked out and the record
has at least one hold already' if not already set. Keep this tab open.
4. In another tab, open the OPAC.
5. Search the OPAC for a record with one item which is NOT checked out.
6. Go to place a hold on this record. Confirm you see a message saying
that you will be charged a hold fee, even though not all items are
checked out and the record does not have a hold --> This is the bug.
7. Apply patch and restart services.
Items available, no holds placed
8. Repeat steps 5-6. This time, you should NOT see the hold fee message.
Items available, holds placed
9. In your staff interface tab, find the same record.
10. Place a hold for a different patron on this record.
11. In your OPAC tab, find this record again and go to place a hold. You
should NOT see the hold fee message.
No items available, no holds placed
12. In your staff interface tab, cancel the hold placed on this record.
13. Check out the item to a different patron.
14. In your OPAC tab, find this record again and go to place a hold. You
should NOT see the hold fee message.
No items available, holds placed
15. In your staff interface tab, keep the item checked out to another
patron.
16. Place a hold for a third patron on this record.
17. In your OPAC tab, find this record again and go to place a hold. You
SHOULD see the hold fee message.
Multiple holds
18. Search the OPAC for a record. Make sure your search will return more
than one result, including our test record.
19. Check the checkbox for our test record, plus another record where
the item is not checked out.
20. Click the Place hold button to place holds on all of our selected
records. You should only see the hold fee message above our test record.
21. In your staff interface tab, test setting HoldFeeMode to the other
values and confirm the hold message shows on the OPAC as expected.
22. Confirm tests pass t/db_dependent/Reserves/GetReserveFee.t
Sponsored-by: Horowhenua Libraries Trust
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a syspref to allow customizing the authority results
view at OPAC with XSLT
Test plan:
1. For testing make sure to have at least one or more authorities
defined
2. OPAC: Home > Authority search(Submit) > Authority search results
Notice the normal view of results
3. Apply patch
4. INTRA: Home > Administration > System preferences ->find
"AuthorityXSLTOpacResultsDisplay"
5. Write the path where your file is. You can use the one for intranet:
.../koha/koha-tmpl/intranet-tmpl/prog/en/XSLT/UNIMARCauthResults.xsl
6. Save changes
7. Repeat step 2 and notice the xslt view of results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the class "itypetext" around item type descriptions so
they can easily be hidden with CSS.
To test:
1. Navigate to the pages listed below to confirm that the text
descriptions do show.
2. Add
.itypetext { display:none; }
to IntranetUserCSS and OPACUserCSS system preferences and save.
3. Go back to the pages listed below and confirm that the text
descriptions DO NOT show.
= STAFF CLIENT =
- catalogue/advsearch.tt
- catalogue/detail.tt
- catalogue/results.tt
- reserve/request.tt
- virtualshelves/shelves.tt
= OPAC =
- opac-advsearch.tt
- opac-detail.tt
- opac-readingrecord.tt
- opac-reserve.tt
- opac-shelves.tt
- opac-user.tt
Refer to David Nind's test notes from Comment 23 for a more detailed
plan for acessing these pages.
Sponsored-by: Catalyst IT
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I'll try to keep the test plan simple:
* Go to patron account in OPAC
* Verify that the your from the beginning of the tab
descriptions has been removed
Bonus: This moves the Recalls history tab below the Holds history
as this is the more logical place for it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch displays the filters on the results pages with the facets
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch attemps to simplify the list of holds by moving the form for
changing a hold's pickup library into a modal dialog.
This patch also makes minor tweaks to the CSS for the "X" close button
shown in modal in windows. Instances where modal markup used "x" have
been updated to use the Bootstrap 4 standard "×"
To test, apply the patch and rebuild the OPAC
SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Turn on the OPACAllowUserToChangeBranch system preference.
- Log in to the OPAC as a user with holds.
- In the view of your holds, confirm that each hold which can be
modified shows a "Change" link.
- Clicking the link should show a modal window with the title of the
item on hold shown in the header.
- Confirm that changing the pickup location works correctly.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows users to change the pickup location for their holds
from the opac. A syspref (OPACAllowUserToChangeBranch) controls at what
stage a hold can be changed.
To test:
1. Set up holds with diffrent statuses for a patron (pending, waiting,
in transit, suspended)
2. No pickup locations for any hold should be able to be changed.
3. Turn on and off the different options under
OPACAllowUserToChangeBranch. Make sure that only the corresponding
holds can be changed from the opac. Check eg in the staff client that
pickup location has changed.
4. The available pickup locations should respect any transfer
restrictions. (Same as the
holds list for a biblio in staff client)
5. For an in-transit hold: Check in the item at the original pickup
location.
6. Note that it will be redirected to the new location.
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Removing unused parts.
Test plan:
See first test plan. Confirm that it still works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Same test plan as before, but for OPAC
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes a correction to the output of OPAC browse results. In
the numbered result navigation links, a title tag on each
navigation link should contain the title of the record. The link for the
current title didn't include the title information in the title tag
because it used the wrong template variables.
To test, apply the patch and make sure OpacBrowseResults is enabled.
- In OPAC, perform a search that will return multiple results.
- View one of the results.
- In the right-hand sidebar, click "Browse results."
- In the list of numbered links at the top of the panel, hover your
mouse over each link. They should each display a tooltip with "View
record [title]"
- Confirm that the current title in the list includes the correct
tooltip.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Without this patch the constructed search link would give wrong
results with Elasticsearch. If you searched for records linked
to authority id 3 it would also turn up all other records linked
to an authority where the id started with 3...
This just copies the more specific link using an,phr used in the
staff interface and the OPAC detail page to make things consistent
To test:
- Turn on Elasticsearch
- Search for authorities in the OPAC
- Locate a authority with a low ID in your result list
- Note the number of linked records
- Click on the link
- It will give you more results than it said before
- Verify results don't match your search
- Apply patch
- Try again - now it should all match up
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fixing the "( total)" in the caption of the table.
The tt var should be replaced now by current_article_requests.size.
Note that current_article_requests is an array now (from as_list).
We cannot use .count since it is no Koha object.
Test plan:
Submit a few article requests.
Check OPAC account page, and verify that both totals are fine now.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Enable suggestion & AnonSuggestions sysprefs and set AnonymousPatron = 1
2. Visit the OPAC without logging in
3. Confirm you can successfully create a suggestion from:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
4. Disable the AnonSuggestions syspref
5. Confirm you cannot see links to make purchase suggestions on the
following pages:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
6. Confirm if you try visiting /cgi-bin/koha/opac-suggestions.pl page
you are re-directed to a login page
7. Select the category of your user in the suggestionPatronCategoryExceptions syspref
8. Log into the OPAC
9. Confirm you cannot see links to make purchase suggestions on the
following pages:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
- opac-user.pl ('Your summary') page
10. Confirm if you try visiting /cgi-bin/koha/opac-suggestions.pl page
you are re-directed to a 404 error page
11. Enable AnonSuggestions syspref
12. Confirm you can successfully create a suggestion from:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
- opac-user.pl ('Your summary') page
13. Disable AnonSuggestions syspref and un-check your category from
suggestionPatronCategoryExeptions syspref
14. Confirm you can create a suggestion from:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
- opac-user.pl ('Your summary') page
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When no result is found and at the bottom of the result list
the option to make a purchase suggestion is displayed. This
also needs to use the new check.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Introduce a suggestionPatronCategoryExceptions system preference.
If the suggestion syspref is enabled then libraries can stop specific
borrower types from making suggestions by ticking the type in the
suggestionPatronCategoryExceptions syspref.
Test plan:
1. Apply patches, update database, re-start services
2. Set 'suggestion' syspref = 'Allow'
3. Confirm you can view the purchase suggestion links on OPAC biblio detail
page & 'your summary' page. As well as successfully submit a suggestion.
4. Select the patron category you're logged in as in
suggestionPatronCategoryExceptions syspref
5. Confirm the purchase suggestion links are hidden in the OPAC biblio
detail page & 'your summary' page
6. In your browser enter the link: <OPAC base URL>/cgi-bin/koha/opac-suggestions.pl
e.g. http://localhost:8080/cgi-bin/koha/opac-suggestions.pl
7. Confirm a 404 page loads
8. Confirm you can view/moderate suggestions in the staff
client - even though your patron is selected in the
suggestionPatronCategoryExceptions syspref
9. Untick your patron category in the suggestionPatronCategoryExceptions syspref
10. Confirm you can view the purchase suggestion links on the OPAC, as
well as successfully submit a suggestion.
11. Set 'suggestion' syspref = "Don't allow"
12. Confirm the purchase suggestion links are hidden in the OPAC
13. Select all patron categories in suggestPatronCategoryExceptions
syspref. View the OPAC without logging in and confirm you can perform
searches and view OPAC biblio detail pages.
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
definded => defined
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the part_number and part_name in the opac results browser.
To test:
0. Apply patch
1. Download the sample records and import into Koha
1.1. Download the sample mrc file
1.2. In Koha staff interface, go to Tools > Stage MARC records for import
1.3. Click 'Browse' and choose the file
1.4. Click 'Upload file'
1.5. Click 'Stage for import'
1.6. Click 'Manage staged records'
1.7. Click 'Import this batch into the catalog'
2. Make sure OpacBrowseResults is enabled
2.1. In Koha staff interface, go to Administration > Global system preferences
2.2. Search for OpacBrowseResults
2.3. If necessary, change to 'enable' and click 'Save all OPAC preferences'
3. In OPAC, search for BFF and browse the results
3.1. In Koha OPAC, search for BFF
3.2. Click on one of the titles to access the opac-detail page
3.3. Click 'Browse results'
--> The browser should show the main title, along with the number and volume title.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the 'cancel selected recalls' button on the biblio
details Recalls page, and ensures a correct cancellation reason is
logged when cancelling a recall in transit.
To test:
1) Ensure UseRecalls is enabled and relevant recalls circulation rules
are set
2) Check out Item A to Patron B
3) Log into OPAC as Patron A
4) Search for Item A and place a recall
5) Go back to the staff interface and search for Item A. When viewing
the biblio record, go to the recalls tab.
6) Check the checkbox for your recall, and click the button to cancel
selected recalls.
7) Confirm your recall is successfully removed and you're redirected to
the correct recalls page for this biblio.
8) Go back to the OPAC and place a recall again. This time set the
pickup location to a different library, one that you're not logged in at
9) Back in the staff interface, check in Item A and confirm the recall
and transfer
10) Go to Circulation -> Recalls to pull. Your recall should show here.
Click the button to cancel the recall and revert the transfer
11) Confirm the recall has been cancelled
12) Go to Reports and create a new SQL report with the following SQL:
select * from branchtransfers b join items i on
b.itemnumber=i.itemnumber where i.barcode = <<barcode>>
13) Run the report and paste the barcode of Item A in the field
14) Confirm there are two rows returned - the transfer triggered when
the recall was confirmed, with a reason of 'Recall' and a cancellation
reason of 'RecallCancellation, and the transfer sending the item back
home when the recall was cancelled, with a reason of
'RecallCancellation'.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds a check for the preference OPACAcquisitionDetails and fetches
the active orders for the item if necessary
Additionally, we simply the check for biblio orders to use object methods
and remove code that stored order information in the item_info
To test:
1 - Enable preference: OPACAcquisitionDetails
2 - Create a basket with items created on order, add an order for a biblio, close the basket
3 - Create a second basket as above, add an order with multiple copies, leave basket open
4 - View biblio on opac
5 - You should see 1 item marked on order, and "1 items on order" below items table
6 - Close second basket
7 - Reload opac view, now 3 on order and in message
8 - Reopen first basket
9 - Reload opac view, now 2 on order and in message
JK: Remove unused @itemnumbers_on_order variable
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects errors raised by the new stylelint configuration in
OPAC SCSS files. Many of the fixes were made automatically by using the
"--fix" option:
npx stylelint koha-tmpl/opac-tmpl/bootstrap/css/src/*.scss --fix
Some examples of errors found:
- Unexpected empty line before $-variable
- Expected single space after ":"
- Expected "#fff" to be "#FFF"
- Expected modern color-function notation
- Expected single space after "("
- Expected single space before ")"
- Expected empty line before comment
- Expected no more than 1 empty line
- Expected a trailing semicolon
- Expected color.adjust($color, $lightness: -$amount) instead of darken($color, $amount)
- Unexpected leading zero
- Expected single space after "," in a single-line function
- Expected double colon pseudo-element notation
Manual fixes include replacing named colors with hex codes, combining
duplicate selectors, removing empty blocks, etc.
Some warnings remain: "Unexpected !important" and "Expected a
placeholder selector (e.g. %placeholder) to be used in @extend" which
both require more than a quick fix, if we should choose to address them.
To test, apply the patch and rebuild the OPAC SCSS:
https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client
Browse around the OPAC to confirm that there are no visible changes to
style.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This never really made it. So let's remove all traces.
Test plan:
Look at code changes and git grep reqholdnotes.
Bonus: Place a hold with/without hold notes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Bookmark the Koha OPAC on an iOS device
2. See if an icon is formed on the home screen
of the device
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes minor modifications to the markup for the
OPAC suggestions search form so that the different labels and
form fields display a little more nicely.
The patch also adds standard Bootstrap alert classes to
several messages which might be displayed on the screen, e.g.
"You have no pending purchase suggestions."
To test, apply the patch and make sure the "suggestion" system
preference is enabled.
- With the OPACViewOthersSuggestions preference disabled, log
in to the OPAC and view your suggestions.
- If you have no suggestions you should see a Bootstrap-styled
message box, "You have no pending purchase suggestions."
- If necessary, submit a suggestion. With at least one suggestion
present you should see a search form above the table of
suggestions. The label, form field, and submit button should
line up nicely.
- Test that the search form works correctly to find suggestions
in your system.
- If you search for a suggestion which doesn't exist you should
see a message-style alert, "There are no pending purchase
suggestions matching your search."
- Enable the OPACViewOthersSuggestions system preference.
- Return to the OPAC suggestions page. The form field should
now include a nicely-styled "Suggested by" filter.
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the OPAC suggestions template in order to
omit the patron name breadcrumb if there is not a logged-in
user.
To test, apply the patch and view the OPAC suggestions page
with the AnonSuggestions preference both enabled and disabled.
- If you are logged in, the page breadcrumbs will be:
Home -> [Your name] -> Purchase suggestions.
- If you are not logged in it should be:
Home -> Purchase suggestions
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds a new ILL_REQUEST_UPDATE notice which is to be used for the
formation of notices informing users of updates to ILL requests.
Commit includes database updates and template changes for messaging
preferences
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=28909
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fixing display of holding branch name.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note: This patch disables the API call (which is not really needed),
and still needs attention in a following patch.
Test plan:
Add opac_info for two libraries and a branchurl for one of the two.
Select a biblio with an item having these two libraries as either
home or holding branch.
Toggle OpacLocationBranchToDisplay and check items table on opac
detail. Click on the library name.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The opac_info call uses find_best_match which does not result in
the All libaries plus specific library response of
AdditionalContents.get.
Test plan:
Revisit individual library page on OPAC.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
git grep -l OpacBranchInfo | xargs sed -i -e's/OpacBranchInfo/OpacLibraryInfo/g'
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Add a few OpacBranchInfo for libraries.
Verify that opac-library shows the correct info per library.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Enable EnableExpiredPasswordReset
2) Find a patron and change their password so you know what it is supposed to be
3) In the database, expire the patron's password, e.g.
UPDATE borrowers SET password_expiration_date = '2022-08-22' where borrowernumber = 21;
4) Go to the OPAC, try to log in with the patron's credentials
5) Click Reset your password
=> Note that the form is in the grey breadcrumbs box, you can compare with any other OPAC page, the grey box should only contain the breadcrumbs
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This changes text from "you have checked out too many items" to
"You have reached the maximum limit of items checked out".
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When using zebra with IncludeSeeFromInSearches on, with traced series, the rejected
forms (4XX) of series entries are visible in result lists, both in OPAC and intra
interfaces.
Test plan:
=========
1. Have a MARC 21 installation with zebra, and with IncludeSeeFromInSearches on.
Have an authority records for series (130, or 100/110/111 with
title) with rejected forms (4XX fields). So the auth record should
contain at least:
130 _0 $a Series title
430 _0 $a Some other title under which the series in known
Use (each) authority record in at least two biblio records (in appropriate
fields, i.e. 800/810/811/830 or even deprecated 440, if it makes use
of UNIF_TITLE).
Don't forget to properly input also 490 (for 8XX). So the biblio record
shold contain at least:
245 nn $a Work title.
490 1_ $a Series title
830 _0 $a Series entry $9 <koha_id>
Reindex.
2. Perform a simple biblio search (in OPAC and in intra) with the title
from auth record.
3. You shold get a list of results. See the Series information--you
shold see not only the accepted entry from 1XX in auth but also the
rejected forms from 4XX.
4. Apply the patch.
5. Repeat 3. You shold see only the entry form of series now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since Bug 14715, one can change number of results per page.
The actual text in combobox for default value is : "Library default:
20"
This text is hard to translate correctly.
For example french translation use "site par défaut" wrongly meaning
"default library".
I propose to simply use "20 (defaut)".
Test plan :
1) Go to system preferences and set both 'numSearchResultsDropdown' and
'OPACnumSearchResultsDropdown' to 'Show'
2) Do a catalogue search in the intranet using a search term that will
bring lots of results
3) Look at restults per page combobox
4) Same for OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) caused the OPAC detail page only show
"Available" status even when the item was in transit.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) cause the OPAC detail page only show
"Available" status even when there were waiting holds.
The onhold item field is removed at the same go as it was confusing
and unused since "Bug 2655: Fixes availabilty counts if items are on
hold shelf. Patch (2/2)" (a37545eb1)
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Mark othernames as required via PatronSelfRegistrationBorrowerMandatoryField
2. Go to the self-reg form, the field is required but the span that makes it look required stays hidden. (<div class="required_label required">Required</div>)
3. Mark initials as required via PatronSelfRegistrationBorrowerMandatoryField.
4. Now the label_required field appears for othernames in the self ref form
5. Apply patch
6. Try again, the label should now properly show when othernames is marked as required
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Moving to an ajax datatable and paging would be a future fix, this restores
lost functionality
To test:
1 - Find or create a title with 20 items
2 - Place a hold in opac
3 - Attempt to select a specific item
4 - Note only 10 show
5 - Apply patch
6 - All items show
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces opac-ratings-ajax.pl with a new REST API route
POST /public/biblios/42/ratings
Note that we could go further and refactor the 'start_rating' select
code.
Test plan:
Test the "star ratings" feature at the OPAC, on the different page
where it's displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
