Replace occurences of 'Notices & slips' with 'Notices and slips'
(replacing '&' and '&' with 'and'), as per the terminology
guidelines.
See the terminology list:
https://wiki.koha-community.org/wiki/Terminology
Test plan:
1. Find occurrences of 'Notices & slips':
- git grep 'Notices & slips' -- :^misc/translator/po
- git grep 'Notices & slips'
2. Review places in the staff interface where 'Messages & slips' is
displayed:
- Tools home page
- Tools > Notices & slips: page title and breadcrumb
- Other breadcrumbs:
. Tools > Notices & slips > New notice > [select any module]
. Tools > Notices & slips > [select Edit for any notice]
. Tools > Notices & slips > [select Delete for any notice]
3. Review other occurences:
. The cron job description for misc/cronjobs/holds/holds_reminder.pl:
misc/cronjobs/holds/holds_reminder.pl -man (scroll down to the
description)
. The TalkingTech README file:
vi misc/cronjobs/thirdparty/TalkingTech.README
4. Apply the patch.
5. Re-run the grep queries from step 1 - no occurences are now found.
6. Review places where 'Notices & slips' was found in steps 2 and 3 -
these should all be replaced with 'Notices and slips' and should
read correctly.
7. Sign off!
Alernative: review the diff for the patch and check that occurences of
'&' and '&' are replaced with 'and' and the updated text reads
correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the name and description of the QOTD tool in order
to make them more consistent with the other tool names and descriptions.
To test:
1) Go to Tools
2) Read the QOTD tool name and description, make sure they make
sense and that there are no typos
3) Test the link to make sure it goes to the tool
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Changed each of the pages in the tools and virtualshelves folders to
have one <h1> tag showing that describes the page, rather than the <h1>
describing the logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to each of the pages in the tools and virtualshelves folders and
check that they have an obvious and descriptive heading
4) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new page providing an interface for generating
barcodes using svc/barcode. A form allows the user to choose various
parameters and see the resulting barcode image.
To test, apply the patch and rebuild the staff interface SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to the "Tools" home page. Follow the link to "Barcode image
generator."
- On the barcode image generator page, confirm that there is a "Barcode
image generator" link in the sidebar and that it is displayed with
bold text.
- Test the features of the form:
- Enter a numeric value in the "Barcode" field and tab out of the
field or click "Show barcode" button. A barcode of type "Code39"
should be shown with the text of the barcode included in the
image below the barcode.
- A text area below the barcode image should show the HTML used to
generate the preview image.
- Clicking in this textarea should automatically add the contents to
the clipboard. You should be shown a message, "HTML copied to the
clipboard."
- Check the "hide text" checkbox. The barcode should be redisplayed
without the text.
- Check that changing the "barcode height" value is reflected
correctly in the barcode image.
- Try adding non-numeric data in the "Barcode" field. You should be
shown an error message, "Barcodes of type [type] must be numeric."
- Test these other numeric barcode types: Code39, COOP2of5, EAN13,
EAN8, IATA2of5, Industrial2of5, ITF, Matrix2of5, NW7, UPCA, and
UPCE.
Note that EAN13, EAN8, UPCA, and UPCE expect specific patterns. Test
values (found here: https://barcode.tec-it.com/en/UPCE):
EAN13: 978020137962
EAN8: 9031101
UPCA: 72527273070
UPCE: 0123456
- Change the barcode type to "QRcode."
- The form should change, hiding the "Hide text" checkbox and
showing a new ranger slider for "QR Code module size."
- The barcode field should now be labeled "Text, URL, or barcode,
etc"
- The barcode field hint should change to a hint about QRcode
dimensions.
- Changing the "module size" slider should change the size of the
generated QR code. As you change the slider the selected value
should be reflected in the box.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
One big patch for one big move.
The "News" feature (opac_news) has been hijacked to handle some system
preferences (bug 26050). The goal was to take profit of the UI (editor)
and the ability to translate the value.
Disclaimer: This patch is NOT offering the best implementation but, as
we still don't have bug 24975, it cannot be done now. And no, we don't
want to wait for it to move forward here. This patch is going into the
right direction anyway.
This enhancement is going to rename the "News" with a more genertic
"Additional contents". We have two different "categories" of content:
"news" and "html customizations".
What does it bring?
- A split on the UI for disambigate the two types of content (news and
syspref/html customizations)
- A simplification of the edit form: all languages will be translatable
on the same view (like the "notice templates")
- Ground will be prepared for different types of content (if needed later)
- Staff news can be translated
How was the "News" area working before this patch?
The opac_news DB table contained a (very inconsistent) 'lang' column.
The different values were:
- '' => news to display at the OPAC and staff interfaces
- 'koha' => news for staff only
- 'slip' => news for slip notices
- $lang => news for OPAC only, translated in $lang ('en', 'es-ES', etc.)
- "$location_$lang" => A syspref moved to this "news" area. The syspref
is $location, and is translated in $lang. Eg. OpacLoginInstructions_en,
OpacLoginInstructions_fr-FR, opacheader_es-ES
This patch is improving the DB structure with the following changes:
- renaming 'opac_news' with 'additional_contents'
- new 'category' column
=> 'news' or 'html_customizations'
- new 'location' column
=> For 'news': 'staff_and_opac', 'staff_only', 'slip'
=> For 'html_customizations': the old syspref name (eg. 'OpacLoginInstructions').
- new 'code' column (see later for more info)
- the 'lang' column will only contain the language code ('en', 'es-ES',
etc.). BUT a 'default' entry will ALWAYS exist for fallback behaviour.
We are getting closer to the 'notice template' table structure because
we want to match its UI. The 'code' column will bring us the ability to
group the different 'additional_contents' rows. The code for a given
news will be the same, but the (lang, title, content) will differ.
Examples:
News 1 will have, for each of the translated versions
(category, code, location, branchcode)
('news', 'News1', $location, $branchcode||undef)
And the 3 following columns will differ:
(title, content, lang)
('title for news 1', 'content for news 1', 'default')
('titulo para 1', 'contenido para 1', 'es-ES')
Note that the "category" is not strictely necessary, but it seems better
to have the ability to split the different content by category/type
easily.
Additional changes:
- Syspref 'NewsToolEditor' is renamed 'AdditionalContentsEditor'
- Koha::NewItem => Koha::AdditionalContent
- Koha::News => Koha::AdditionalContents
- Script and template renamed from koha-news to additional-contents
- Foreign keys have been renamed
- Subpermission edit_news has been renamed edit_additional_contents
- The UI can now be accessed via a "News" or "HTML customizations" link
from the tools module. The related contents will then be displayed (both
categories are now split)
Changes not done here:
- Primary key 'idnew' could be renamed 'id'
Limitations of the upgrade:
News cannot be grouped by a unique code for existing translations.
=> A given news will be now displayed several times on the translated
interface
Any ideas to improve the upgrade behaviour?
We will have to add a warning in the release notes to tell libraries to
review their news.
Test plan:
0. Don't apply the patches
1. Translate the interfaces in some languages
. Create some news for staff and OPAC
. Create some content for different entry of HTML customizations
Note that you are forced to define a 'default'.
Also note that you are only forced to fill the title (not the content).
This is certainly problematic (see FIXME in the code) as sometime only
the content is displayed.
. Play with the interface (edit, delete, filter)
. Go to the different places the news are displayed, and confirm they
are displayed correctly (staff home, opac home, opac rss)
. Create 1+ news for 'slip', check an item out and 'print slip' (from
the circulation page). You must see the news.
. Go to the different places you are expecting the HTML customizations
to be present and confirm that you see them.
. Switch the lang of the interface and confirm that you now see the
content in the translated version
. Generate the templates in another language, don't translate the
content
. Use this language for the interface and confirm that the 'default'
version is displauyed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In tools home, we actually see 2 wordings : biblios/bibliographic authorities/authority
Looks like bibliographic is more correct.
Test plan :
1) Apply patch and look at words in tools home /cgi-bin/koha/tools/tools-home.pl
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch impliments some terminology changes and clarifications for
the cash management system
Test plan
1/ Apply the patches
2/ Enable 'UseCashRegisters'
3/ Navigate around the cash management system (via the Tools menu)
4/ Enable 'EnablePointOfSale'
5/ Navigate around the cash management system (via the Point of sale
module)
6/ Comment on what you think about the changes
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as previous patch for other files.
Looks like the problem exists only with IF.
== test plan ==
1. See the problematic strings in a given language
git grep "\bIF\b" misc/translator/po | grep -v '#' | grep '\bzh-Hant-TW'
2. update the language
misc/translator/translate update zh-Hant-TW
3. Recheck the problematic strings, they aren't here anymore
4. Check the diff: git diff
and search the if's with «/-.* IF » to see how the deleted strings
look like and that it makes sense.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Swapped the order of the page titles to have the unique information
first, i.e. the name of the specific page displays first, and the name of the website (e.g. Koha) displays at the end.
To test:
1) Apply patch
2) Ensure each of the files in the tools folder are swapped around
to display the most unique information first, and the website name is at the end
3) Ensure the pages displayed on the Staff Client that correspond to
these files also display the changes
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I think the "breadcrumbs" ID is worth saving for past and future CSS
customization reasons.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Modified breadcrumbs to be accessible, in particular for a
screen-reader.
Made the block of breadcrumbs be a <nav aria label="Breadcrumb"
class="breadcrumb"> with an ordered list inside. The last breadcrumbs
also has aria-current="page" to specify that it is the current page.
To test:
1) Apply patch
2) Build scss file
3) Ensure each of the files in the tools and virtualshelves folders have
breadcrumbs that are in a <nav aria label="Breadcrumb"
class="breadcrumb"> block
4) Ensure that there is an ordered list in the block of breadcrumbs
5) Ensure that the last breadcrumb has aria-current="page"
6) Ensure that the breadcrumbs on each page of the staff client
belonging to these files look the same as before, but the '>' symbol
is replaced with '/' and the last breadcrumb has bold text
7) Ensure that when the last breadcrumb is clicked it takes you to the
page you are currently on
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In tools home there is a link to the table showing tool plugins.
Would be great to be able to run a tool plugin directly from tools home.
Also adds the behavior than if there is no tool plugin, "Tool plugins"
section is not displayed in tools home.
No need of a link that goes to an empty table ;)
Test plan :
1) Enable plugins, dont install any
2) Go to "Tools" module : /cgi-bin/koha/tools/tools-home.pl
3) Check you dont see "Tool plugins"
4) Install a tool plugin like Carrousel https://inlibro.com/instructions-carrousel/
5) Refresh /cgi-bin/koha/tools/tools-home.pl
6) Check you see "Tool plugins" and a link to Carrousel
7) Click on link to Carrousel => You see plugin run
8) Disable Carrousel plugin
9) Refresh /cgi-bin/koha/tools/tools-home.pl
10) Check you dont see "Tool plugins"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'Cashup registers' link from the tools page retained an previous
verions of the permission name. This patch corrects it to use the final
name we sebtled on and thus now correctly displays the link when
appropriate.
Test plan
1/ Enable cash registers via the 'UseCashRegisters' system preference
2/ Ensure you are logged in as a user who has the cash management
cashup permission.
3/ Verify that the 'Cashup registers' option appears on the tools page.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the OPAC problem report management page from the
Administration section to the Tools section.
I think this makes sense because management of reports is an ongoing
task, not a configuration.
To test, apply the patch and enable the OPACReportProblem system
preference.
- Go to Administration. There should be no link to OPAC problem
reports.
- Open an administration page which shows the Administration menu in
the left-hand sidebar, e.g. Libraries. There should be no link to
OPAC problem reports in the menu.
- Go to Tools. There should be a link to OPAC problem reports in the
"Addional tools" section.
- Open the OPAC problem reports page and confirm that it works
correctly.
- The breadcrumbs menu should show "Tools > OPAC problem reports."
- Confirm that the link in the sidebar menu works correctly.
- If necessary, submit an OPAC problem report via the OPAC so that
there is a pending report. Go to the staff interface home page and
check that the "OPAC problem reports pending" link works correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In addition to checking the patron image upload permission, this
adds a check for the patronimages system preference to the tools
home page and sidebar.
To test:
- Check that the patron image upload tool only displays when
- system preference patronimages is set to 'Allow'
and user is either
- superlibrarian or
- has bath_upload_patron_images permission
- Save URL of patron image uploader page
- Turn off patronimages
- Verify you get redirected to the home page of Koha when trying
to access the page
Note: this redirect is already used by the stock rotation feature.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In order to remove UseKohaPlugins syspref, adds to Koha Template Toolkit
plugin a method ArePluginsEnabled().
Test plan:
1) Set syspref UseKohaPlugins enabled
2) Set config enable_plugins=1
3) Check you see "Tool plugins" in "Tools" home page and menu
4) Check you see "Manage plugins" in "Koha administration" home page
5) Check you see "Report plugins" in "Reports" home page and menu
6) Set config enable_plugins=0
7) Check you don't see in 3) 4) 5)
8) Run prove t/Koha_Template_Plugin_Koha.t
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The patron clubs note was ending with .., but patch also removed
some single . to be consistent with the majority of entries on the
tools page.
To test:
- Check the tools start page for ending . in the notes
- Apply patch
- Verify the punctuation is now consistent
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a new 'branch details' page to the POS system which
displays a summary of the cash register transactions for a branch
since each register was last cashed up. It also allows for cashing
up individual registers or cashing up all registers at a given branch
in one transaction.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The headings for each column on the tools page will show, even if the
user has no permission for any tool below it. This patch tries to
correct this.
To test:
- Try various combinations of tool permissions
- On the tools module start page and for the tools sidebar
visible on the left on a tool's page:
- Make sure headings don't show when you have no permissions
for any of the tools listed below
- Make sure headings show correctly if you have one or
many of the tools permissions needed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The qa tool gives some warnings but I think they can be considered false
positives.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Originally this menu item was placed under the 'Patrons' section of the
tools page, this patch moves it to the more appropriate 'Catalog'
section.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The stock rotation feature adds a batch process to automate rotation of
catalgue items with a staff client page under tools to manage rotas/schedules.
Once a rota is configured, and your staff user has the right permissions
to allocate items, then an additional tab will appear on biblio records
allowing the management of of which rota, if any, individual items belong to.
It also includes a cron script to process the items on a daily basis.
Signed-off-by: Kathleen Milne <kathleen.milne@cne-siar.gov.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: I removed a temporary file
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Here we go, next step then.
As we did not fix the performance issue when autofiltering
the variables (see bug 20975), the only solution we have is to add the
filters explicitely.
This patch has been autogenerated (using add_html_filters.pl, see next
pathces) and add the html filter to all the variables displayed in the
template.
Exceptions are made (using the new 'raw' TT filter) to the variable we
already listed in the previous versions of this patch.
To test:
- Use t/db_dependent/Koha/Patrons.t to populate your DB with autogenerated
data which contain <script> tags
- Remove them from borrower_debarments.comments (there are allowed here)
update borrower_debarments set comment="html tags possible here";
- From the interface hit page and try to catch alert box.
If you find one it means you find a possible XSS.
To know where it comes from:
* note the exact URL where you found it
* note the alert box content
* Dump your DB and search for the string in the dump to identify its
location (for instance table.field)
Next:
* Ideally we would like to use the raw filter when it is not necessary
to HTML escape the variables (in big loop for instance)
* Provide a QA script to catch missing filters (we want html, uri, url
or raw, certainly others that I am forgetting now)
* Replace the html filters with uri when needed (!)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates various unrelated templates to use the Bootstrap
grid. In each case, confirm that the indicated page looks correct.
This patch also corrects a couple of capitalization errors and removes
an unused template: virtualshelves/merge.tt.
- Tools -> Patron card creator -> Manage -> Card batches
- Export a batch
- The pages inside the modal window should look correct: Both the "X
batch(es) to export" screen and the "download exported batch(es)"
one.
- Tools -> Patron lists -> Edit list
- The patron list add/edit form should look correct.
- Disable plugins in koha-conf.xml.
- Tools -> Plugins
- The "Plugins disabled" page should look correct.
- Enable plugins in koha-conf.xml
- Tools -> Plugins -> Upload plugins.
- This page should look correct.
- Tools
- The tools home page should show three columns: Patrons and
Circulation, Catalog, Additional tools.
- At viewport width below 768 pixels content should reflow into one
column.
- virtualshelves/merge.tt has been removed as it is unused. Search the
codebase for references to it. There should be none.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I think this tool could be used in multiple ways, for all kinds
of files that you want to protect by login in Koha. So a more
general name might work better.
This is a suggestion, not mandatory.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This squash contains all of these commits:
- Adds a page to access log files on the server from the intranet
- Update ID to allow for permalinking
- Rename config to "'accessdir' and fix qa
- Allows for multiple directories to be accessible
- Update the link under reports
- (Follow-up) Fixing merge error and cosmetic changes
- (Follow-up) Fix tab chars and move javascript to the footer
- (QA Follow-up) Fix datatable
- Make filename unicode-proof, renamed accessdir to access_dir and fix update
Test plans:
- Apply patch, update database
- Add to koha-conf:
<access_dir>/tmp/koha-public/one</access_dir>
<access_dir>/tmp/koha-public/two</access_dir>
<access_dir>/tmp/koha-public</access_dir>
- Create these directories ( mkdir /tmp/koha-public , etc...)
- Create these files:
echo "hello world!" > /tmp/koha-public/❤
echo "test" > /tmp/koha-public/one/samename.txt
echo "this is not the same" > /tmp/koha-public/two/samename.txt
- Login as Superadmin, go to tools > reports files
- Click on ❤, make sure it's downloadable and readable
- Click on both samename.txt, look inside and make sure the file is different
- Login as NON-superadmin. Go under tools, see no Report/Log under the third column
- Go to add tools/access_file permission to user
- See new entry under tools third column.
- validate link is ok.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 14610 revised staff-global.css so that the "holdcount" class was
renamed "number_box." That's good. It's good to have something more
generic since the class is used in multiple places.
The problem is that there are still several instances of the "holdcount"
class in the templates which should have been updated at the same time
to say "number_box." Those instances are now unstyled.
Test Plan:
1) Apply this patch
2) Check that the holds count on catalogue/detail.pl is styled
3) Check that the patron modifications count on members/member.pl is styled
4) Check that the pending comments count on tools/tools-home.pl is styled
5) Check that the pending tags count on tools/tools-home.pl is styled
Signed-off-by: Chris Kirby <christopherlawrencekirby@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to the tools home page. Confirm it says 'Inventory' instead of
'Inventory/stocktaking' in heading and in description
2) Click Inventory. Confirm heading now says 'Inventory' instead of
'Inventory/stocktaking'
3) Confirm that it now says 'Inventory' instead of
'Inventory/stocktaking' in the tools menu along the left of the page
4) Click Help in top right corner. Confirm help heading now says
'Inventory' instead of 'Inventory/stocktaking'
5) Go to user account page, go to Set Permissions
6) Expand Tools option and confirm it says 'inventory' instead of
'inventory (stocktaking)'
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes multiple changes to the plugins home page template to
bring it up to date with current interface patterns.
Test the following changes:
- Breacrumb links have been corrected to include "Tools" in the path.
Verify that this link is correct.
- A toolbar has been added for an "Upload plugin" button. Uploading is
an action, not a view, so it should be displayed in a toolbar. Verify
that the button works correctly.
- Messages are now formatted as messages rather than as headings. To
test, trigger a message by, for instance, uninstalling all plugins or
passing an invalid "method" parameter with the URL.
- Incorrect capitalization corrected.
- Plugin actions are moved to a single "Actions" dropdown menu. This
includes 'Run report,' 'Run tool,' 'Configure,' and 'Uninstall.' Test
that all these menu options work correctly.
- The standard "Tools" sidebar menu has been added.
- An "onclick" attribute has been removed in favor of defining the event
in JavaScript. Test by choosing the 'Uninstall' menu item for a
plugin. Test both confirm and cancel actions.
Also changed:
- Corrected capitalization on the tools home page.
- Adding missing plugins link to the tools sidebar menu.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There is a link to EDIfact messages on the tools home page that will
lead to an error. I assume that the link should be removed in favor of
the link on the acquisitions homepage.
Test Plan:
1) Note the EDIfact messages link on the Tools home page
2) Apply this patch
3) Refresh the page, the link should be gone
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes sure that the added granular permissions work as
advertised.
Note: The field owner was not included in the Koha::Upload->get response.
The code to verify if a user is allowed to delete an upload, is concentrated
in the template now. When get returns a Koha::Object, this check could be
relocated.
Test plan:
[1] Verify that the current user has permission for tools, or has
at least upload_general_files.
[2] Do you see Upload in the Tools menu? Follow the link.
[3] Upload a permanent file (with a category).
[4] Do you see the Delete button in the results form?
[5] Make sure that another user has no permission to upload.
[6] Login as that user and check the Tools menu.
Try the URL [yourserver]/cgi-bin/koha/tools/upload.pl
You should have no access to the upload form.
[7] Enable upload_general_files for this user. Go to upload and search for
the upload from step 3. You should not see a Delete button.
[8] Enable upload_manage for this user. Search for the upload again.
Delete the upload.
[9] Go to upload via the Cataloguing editor (856$u plugin) or add
parameter "plugin=1" to the URL. You should not see the Tools menu.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds:
- a new DB field items.new.
- a new page to configure this new status
(tools/toggle_new_status.pl).
- a new cronjob script (misc/cronjobs/automatic_item_modification_by_age.pl
was misc/cronjob/toggle_new_status.pl)
Why this status is useful for some libraries ?
The use cases are:
- to know easily what are the new items (with a simple sql query).
- to display an icon in the search results.
- issuing rules can be adapt for new items. Automatically (using the
cronjob script), the status change (depending the configuration) and
the item can be issued, for example.
- a RSS/Atom feeds can be created on these new items.
Test plan:
- log in with a librarian having the tools > items_batchmod permission.
- navigate to Home > Tools > Automatic item modifications by age (was: Toggle new status)
- click on the edit button
- there are 3 "blocks":
* duration: the duration during an item is considered as new.
* conditions: the status will change only if the conditions are meet.
* substitutions: if there is no substitution, no action will be done.
You can add some change to apply to the matching items.
E.g. ccode=3
new=''
If the value is an empty string (in other words, the input does not
contain anything), the field will be deleted.
You can create as many rules as you want.
- test the interface : add/remove rule, conditions, substitutions,
submit the form, edit, etc.
(There is a looot of JS everywhere, so certainly a looot of bugs...).
- when you have your rules defined, you can now launch the cronjob
script without any parameter.
A report will be displayed with the matching itemnumber and the
substitutions to apply. Verify results are consistent.
- launch the script with the -c argument and verify values have been
modified depending the substitution rules.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add the ability to specify fields from biblioitems table.
Test plan:
Same as before but try with fields from the biblioitems table.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add UT for C4::Items::ToggleNewStatus
Test plan:
prove t/db_dependent/Items/ToggleNewStatus.t
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: FIX - condition on biblioitems table does not work
If a rule contains a condition on the biblioitems table, the match won't
work. This patch fixes this issue.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Use DBIx-Class to retrieve column names
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Don't use the biblioitems fields for the subtitution
It's dangerous to allow a change on the biblioitems fields with this
feature.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Rename the duration parameter with 'age'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: The age parameter should be a number
The template should check if the age parameter is correctly filled
(should be a number).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Change the name of the feature
Originaly this feature only permits to update the "new" field.
Now all item fields can be updated.
The name of the feature is now "Automatic item modifications by age".
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup]
* Update DB version
* Fix capitalization error
* Rename misc/cronjobs/toggle_new_status.pl to misc/cronjobs/automatic_item_modification_by_age.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup] - Complete the renaming of "toggle new status" to "automatic item modification by age"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Notice Rotating Collections is under Patrons & Circ on tools-home.pl
2) Apply patch and refresh page
3) Notice it is now under Catalog and is in the same position it is in on the tools sidebar menu
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Moves the entry for 'Rotating collections' from the Catalog
column to the 'Patrons and circulation' column.
To test:
- Verify the entry has been moved on the tools home page
NOTE: I agree that collections makes more sense under the new
column.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds links in the tool module to the new batch tool and in
the basket.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch offers a new tool for deleting records.
Biblios and authorities will can to be deleted with a simple list of
biblionumber or authid.
This feature adds:
- a new pl/tt files tools/batch_delete_records
- a new permission: tools > records_batchdel
Test plan for biblios:
1/ There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Delete"
- generating a list from a report
2/ On the "Batch record deletion" tool verify:
- biblios with issues cannot be deleted (checkbox disabled and line in
red).
- information is correct.
- sort functions work on each columns.
- the items, reserves and issues values are correct.
3/ After clicking on the "Delete selected recors" button, verify:
- reserves, items and biblio have successful been deleted.
- if an error occurs, the tool display an error message.
Test plan for authority:
1/ Generate a list of authid using a report:
2/ On the "Batch record deletion" tool verify:
- authorities are display with the summary.
- the count usage (used in X biblios) is correct.
3/ After clicking on the "Delete selected recors" button, verify:
- The authorities have successful been deleted.
- if an error occurs, the tool display an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes drastic changes to the templates in order to bring
them into compliance with established patterns and markup guidelines.
Only minor changes are made to perl scripts.
Changes:
- Add a toolbar include for displaying new, edit, transfer, and delete
buttons.
- Improve title and breadcrumbs with collection titles and better
specificity.
- Correct page structure which was inconsistent with the markup of
similarly-structured pages.
- Correct styling of error and informational messages.
- Added detailed error messages for a couple of conditions which were
not defined in the template.
- Add link to the detail page of titles which are in a collection using
the view defined in the IntranetBiblioDefaultView preference.
- Add a link to remove an item from a collection directly without having
to scan the barcode.
- Add client-side validation to collection creation form.
- In RotatingCollections.pm, add biblionumber to the list of columns
returned by GetItemsInCollection.
- In rotating_collections/*.pl, remove obsolete declaration of system
preference variables.
To test, perform all the operations associated with Rotating
Collections:
- Add a new collection
- Edit an existing collection
- Add items to a collection
- Remove items from a collection (via barcode and link)
- Test the behavior of all new toolbar buttons
- Verify that titles and breadcrumbs look correct and links work
correctly.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Test Plan:
In "Tools" -> "Rotating Collections" -> "Add/Remove items":
When adding item barcodes to the collection, the input field
<input type="text" id="barcode" name="barcode">
should become active
automatically so it is easy to add multiple barcodes rapidly without touching the
mouse or keyboard.
Enter-press is dealt by the barcode reader so automatic form submittal should be handled
by the barcode reader.
In "Rotating collections" -> "Transfer Collection":
When the collection is initially transferred, items are set to trasfer correctly.
When the collection is transferred while items are still being transferred, the transfer
destination library doesn't change from the original one.
The holding library changes for all items in the collection to the destination library on
retransfers as well.
This is tricky if a user accidentally places the wrong destination.
When I try to checkin these items to their new retransfer location, I get the following messages:
-"This item is part of a rotating collection and needs to be transferred to <original transfer destination>"
-"Please return Valkoinen ihmissyj / to <original transfer destination>"
-"Print slip or Cancel transfer"
When I checkin a Item to a arbitrary branch, I get the following messages:
"This item is part of a rotating collection and needs to be transferred to <retransfer destination>"
"Please return Valkoinen ihmissyj / to <original trasfer destination>"
Bug 8836 - Resurrect Rotating Collections - QA Followup
Bug 8836 - Resurrect Rotating Collections - Followup 2 - Perltidy rotating collections scripts
Bug 8836 - Resurrect Rotating Collections - Followup 3
* Fix bad TT Tag
* Fix bad sql query
* Fix capitalization ( HTML4 )
* Allow a rotating collection's location to keep AutomaticItemReturn
from sending it back to the branch of origin
* Fix bad query
Bug 8836 - Resurrect Rotating Collections - Followup 4 - Autofocus on barcode field
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Don't transfer issued and waiting items
Items in a rotating collection are automatcially transferred when a
collection is transferred. This is a problem for currently checked out
items and items on hold marked as "Waiting".
This patch resolves this issue by skipping the transfer for those items.
When the items are then returned, the librarian will be alerted to
transfer the item to the library currently holding that rotating
collection.
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Link collections.colBranchcode to branches.branchcode
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
http://bugs.koha-community.org/show_bug.cgi?id=8835
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The MARC Modification Templates system gives Koha users
the power to make alterations to MARC records automatically
while staging MARC records for import.
This tool is useful for altering MARC records from
various venders work with your MARC framework.
The system essentially allows one to create a basic script
using actions to Copy, Move, Add, Update and Delete fields.
Each action can also have an optional condition to check
the value or existance of another field.
The Copy & Move actions also support Regular Expressions,
which can be used to automatically modify field values during the
copy/move. An example would be to strip out the '$' character
in field 020$c.
Furthermore, the value for an update can include variables
that change each time the template is used. Currently,
the system supports two variables, __BRANCHCODE__ which
is replaced with the branchcode of the library currently
using the template, and __CURRENTDATE__ which is replaced
with the current date in ISO format ( YYYY-MM-DD ).
At its simplist, it can perform functions such as:
Copy field 092$a to 952$c
At its most complex it can run actions like:
Copy field 020$c to 020$c using RegEx s/\$// if 020$c equals RegEx m/^\$/
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test before the patch is applied notice that on the member-flags
page it says
"upload patron images in batch or one at a time"
After the patch it should say
"upload patron images in a batch or one at a time"
Try also for tools-home
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, only affecting templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron lists feature is somewhat similar to the record lists feature
in that it allows a librarian to create a list of patrons for later
retrieval and manipluation. These lists can then be used with the batch
patron modification tool.
Test Plan:
0) Apply the patch for Bug 8798
1) Apply this patch
2) Run updatedatabase.pl
3) Access the patron lists feature from Koha's Tools menu.
4) Create a new list via the "New patron list" button.
5) For this list, click the "Edit" button, and change the list name.
6) For this list, click the "Add patrons" button, and search for and
add some patrons to your list.
7) For this list select some patrons to remove them.
8) Try both adding some new patrons, and removing some old patrons
as a single action.
9) Click the "Patrons" link on the Koha toolbar
10) Search the patrons, or browse by letter to get patron results
11) Check the checkboxes next to one or more patrons, and add the
selected patrons to your existing list.
12) Change the "Selected patrons" pulldown to "All resultant patrons"
and add them to your list.
13) Check the checkboxes next to one or more patrons, and add the
selected patrons to a new list.
14) Try manipulating a list of patrons using the batch patron
modification tool.
15) Go back to the Patron Lists feature and delete your lists.
16) Run 'prove t/db_dependent/PatronLists.t'
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
