It seems this has been caused by
commit 1544f9a5d4
Bug 18276: Remove GetBiblioFromItemNumber - circulation pages
To reproduce the problem you need switch on the two prefs
- OnSiteCheckouts
- OnSiteCheckoutsForce
Test plan:
Try to check an item out using an unknown barcode
With the 2 prefs set to on and without this patch, you will get the
following error in the log
Can't call method "materials" on an undefined value at
/home/vagrant/kohaclone/circ/circulation.pl line 387.
With this patch applied you should not get this error and a correct
behaviour for the different pref combinations.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Do not apply the patch
1) Have some overdued checkouts in your database
2) Go to circulation -> overdues (overdues.pl)
3) Try to sort the overdues table by due date and notice it is sorted
alphabetically, not by date
4) Apply the patch
5) Try again and confirm, it is sorted by date
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a recurrent bug we have over the last years. When a script is
called with non-existent borrowernumber it will crashes.
We need to handle this gracefully instead of letting the script crashes.
On bug 18403 a new subroutine is added to the codebase
(output_and_exit_if_error) to handle this kind of errors correctly.
Since it is not pushed yet, I propose to just redirect to a script that
handle it correctly (circulation.pl) instead of adding this message to
all these scripts.
Test plan:
Hit different scripts from the members module and pass a non-existent
borrowernumber.
You must be redirected to circulation.pl with a friendly message.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Change parameters to a hashref.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me.
Two calls in migration_tools/22_to_30 still in old style.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Restore datepicker class
Use Koha.Preference
Copy changes to moremember
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If an item is checked out with the auto renewal flag and a confirmation
is needed (holds exist, past due date, etc.) the auto renewal flag will
get lost.
Test plan:
- Check an item out and specify a past due date
- Confirm the checkout on the confirmation screen
=> Without this patch the checkout is not marked as auto renewal
=> With this patch applied the auto renewal flag will be set to the
checkout
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha suffers of big bugs due to its history: When data are deleted, they
are moved to another tables.
For instance issues and old_issues: when a checkin is done, it is moved
to the old_issues table.
That leads to a main problem that is described on
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
However we tried first to fix the problem (for issues/old_issues) at
code level on bug 18242.
The goal was to prevent data lost.
Data lost may happens in this case:
Check an item out (issue_id = 1)
Check an item in (issue_id = 1)
Restart MySQL (reset auto increment for issue_id to 1)
Check an item out (issue_id = 1)
Check an item in => BOOM, the issue_id is a PK in old_issues and the
move fails.
Before bug 18242 the data were lost, we inserted the value into
old_issues, which fails silently (because of RaiseError set to 0 in
Koha::Database), then delete the row from issues.
That has been fixed using a transaction.
This patch introduced a regression we tried to fix on bug 18651 comment
0, the patron was charged even if the checkin was rejected.
A good way to fix that would have been to LOCK the tables:
1- Start a transaction
2- LOCK the table to make sure nobody will read id and avoid race
conditions
3- Move the content from one table to the other, dealing with ids
4- UNLOCK the table
5- Commit the transaction
But there were problems using LOCK and DBIx::Class (See commit
905572910b - Do no LOCK/UNLOCK the table).
Finally the solution implemented is not acceptable for several reasons:
- batch checkins may fail
- issue_id will always stay out of sync (between issues and old_issues)
See 18651 comment 66.
Since the next stable releases are very soon, and we absolutely need to
fix this problem, I am suggesting to:
1- Execute the move in a transaction to avoid data lost and reject the
checkin if we face IDs dup
=> It will only reject 1 checkin (max is 1 * MySQL restart), no need to
deal with race conditions,
2- Display a warning on the checkin page and link to a
solution/explanation
3- Communicate as much as we can on the proper fix: Update auto
increment values when the DBMS is restarted -
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
4- Display a warning on the about page for corrupted data (see bug
18931)
5- Write and make available a maintenance script to fix corrupted data
(TODO LATER)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The subroutine C4::Biblio::GetBiblioFromItemNumber was wrong for several
reasons:
- badly named, we can get biblio info from a barcode
- SELECT * from items, biblio and biblioitems
makes things hard to follow and debug, we never know where do come from
the value we display
- sometimes called only for trivial information such as biblionumber,
author or title
This patchset suggests to replace it with calls to:
- Koha::Items->find for item's info
- $item->biblio for biblio's info
- $item->biblio->biblioitem for biblioitem's info
Test plan:
Item's info should correctly be displayed on the following pages:
- circulation history
- transfer book
- checkin
- waiting holds
QA will check the other changes reading the code, it's trivial
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Checkout items in a batch
The information displayed should be ok (title, subtitles, author,
itemnotes, barcode)
2. Checkout an item using the standard checkout page
You should correctly see the information of the item that has been
checked out (title and author)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are a few calls to GetItemIssue where it's not as easy to make
sure everything will be fine just replacing the calls with a
Koha::Issues->find
- In AddReturn the overdue flag is used (that's why this patch depends
on bug 17689)
- In CanBookBeRenewed, as well as the overdue flag the dates converted
to DateTime were used. It's now our job to convert them when we need
them.
- Same in AddRenewal but we also call _CalculateAndUpdateFine, so we
need to update the variables in this subroutine.
Note that, prior to this patch, AddReturn returned the GetItemIssue
hashref in the $iteminformation. Most of the time this variable is not
used, I have found only 1 place where it's used: circ/returns.pl
TODO: In this script we should call ->is_overdue instead of the
DateTime->compare calls
Test plan:
All the circulation tests must pass (it's how I have caught the specific
cases).
Do some checkins/checkouts/renewal and focus on the due date
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Removing the commented section from the template: If it does not work, it should not be here.
When it works again, put it back in.
Since @itemtypesloop is not used, remove it from the script too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Aleisha spotted the typo in $itemtypes and proposed a correction on bug 18859.
The description was not even used. Template calls GetDescription.
To test:
Verify that viewing the holds queue still works as expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replace the different calls to GetReservesFromBorrowernumber
with a calls to Koha::Patron->get_holds.
In some places we need to get a restricted set of holds, that's why we
process a search on this holds returned by ->get_holds (on the found
status for instance).
The changes are quite trivial and reading the diff should be enough to
catch bugs.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17737,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The C4::Koha::getitemtypeinfo subroutine did the almost same job as
GetItemTypes. On top of that it returned the imageurl value processed by
C4::Koha::getitemtypeimagelocation.
This value is only used from the 2 [opac-]shelves.pl scripts. Then it's
better not retrieve it only when we need it.
Test plan:
Play with the different scripts touched by this patch and focus on item
types. The same description as prior to this patch must be displayed.
Note that sometimes it is not the translated description which is
displayed, but that should be fixed on another bug report. Indeed we do
not expect this patch to change any behaviors.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch set the lang parameter when C4::Letters::GetPreparedLetter is
called to generate the notice.
Note that we do not need to pass it if want_librarian is set.
TODO: I do not know what to do with TransferSlip
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Remove expiration date calculation in C4::Letter since it's done
when setting the reserve waiting,
- remove expiration date calculation in circ/waitingreserves.pl. Use
the one in DB,
- add a new atomic update that calculate expiration date for
waiting reserves,
- add tests for days_foward function and fix the infinite loop.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17680 is removing it.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a "Note" input field to checked out items in the "your summary"
section. The field allows patrons to write notes about the item checked out,
such as "this DVD is scratched", "the binding was torn", etc. The note will be
emailed to the library and displayed on item check in.
Patch adds two fields to the "issues" table - "note" and "notedate".
Patch adds syspref "AllowIssueNotes" - default off.
Test Plan:
1) Apply this patch
2) Update database
3) Rebuild schema
4) Turn on 'AllowIssueNote' syspref
5) Check out three different items to a borrower (may be easiest to check
out to yourself)
6) Log in as that borrower (or yourself) on the OPAC side and go to your
summary
7) Confirm text field shows under Note column for all checkouts. Set a
note for each issue, confirm all save.
8) Check the message_queue in mysql for the entries for ALL THREE issue
notes.
9) Disable javascript in your browser
10) Refresh your summary page. Confirm that you can no longer edit the
notes in the text field. Click the 'Create/edit note' button and confirm
you are redirected to a new page.
11) Confirm that the correct title and author show for the note button
you clicked.
12) Set the note and click Submit -> confirm you are redirected
back to summary page and note is saved
13) Confirm there is a new entry in message_queue
14) Enable javascript and go back to the your checkouts page in the
staff client for the borrower you issued the items to
15) Check in TWO items
16) Confirm that the issue notes show under the "Date due" column for
the two items you checked in, and are accurate to the item (i.e. the
right issue note under the right item)
17) Go to circ/returns.pl and check in the final item using the barcode.
Confirm the issue note shows and the date is formatted correctly.
Sponsored-by: Region Halland
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marc Véron <veron@veron.ch>
This problem stems from bug 17642, if items.materials is not linked to
an authorized value the contents are being tossed out. We shuold display
them instead
To test:
1 - Ensure items.materials 952$3 is not mapped to an authorized value
2 - Add a value to an item
3 - Check the item out, note the materials does not display
4 - Check the item in, note the materials does not display
5 - Apply patch
6 - Check the item out, note the materials does display
7 - Check the item in, note the materials does display
Followed test plan, message about material displays as expected
whil checking out and in.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When checking in, information about patrons with a hold always display
in an US style. Address information should opey the system preference
AddressFormat
To reproduce:
- Set syspref AddressFormat to German style
- Check out an item to a patron A
- Put a hold on this item for patron B
- Check in item using the Check in field in page header
- Result: In message 'Hold found', address does not display in German
style
To test:
- Apply patch
- Repeat steps above
- Verify that address displays as expected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the retrieval of the syspref borrowerRelationship
from the scripts and moves it to a check using the Template Toolkit
plugin
To test:
1 - Apply patch
2 - Ensure 'Add child' button displays appropriately on all member pages.
Tested 3 pateches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On the same way of Koha::Biblio->get_holds,
Koha::Biblio->get_holds_placed_before_today and Koha::Patron->get_holds,
this new subroutin will permit to retrieve the holds placed on a
specific item.
Note that at the moment we do not need a Koha::Item->get_holds method:
we do not want to display future holds placed in the future.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17738,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a datatable to the circ overdue report. Since the
datatable makes sorting easy, I've also removed the sort by filter on
the side.
To test:
1) Go to Circulation -> Overdues
2) Notice overdues report shows as datatable
3) Confirm sorting on all columns works
4) Test the Filters and confirm they all still work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The way the export options are displayed at the bottom of the checkouts table
was not consistent.
Prior to this patch set, they are display if ExportRemoveFields or
ExportWithCsvProfile is set.
It does not make any sense, the user could want to export the checkouts in
iso2709 format without having to define a csv profile and fill the pref.
Moreover the behavior of this pref did not match its description: it's used as
a default CSV profile when exporting records from the export tools or the
command line.
This patch set adds a new pref ExportCircHistory and remove
ExportWithCsvProfile. The new pref is set if ExportWithCsvProfile or
ExportRemoveFields were set.
A new dropdown list with the CSV profile list will be displayed in the
export area, at the bottom of the checkouts table.
Note that now --csv_profile_id is mandatory for the export command line
(misc/export_records.pl) if the export format is csv.
Test plan:
0/ Do not execute the DB entry
1/ Clear both ExportWithCsvProfile and ExportRemoveFields prefs
2/ Execute the DB entry
3/ ExportCircHistory should not be set and the export options should not
be displayed at the bottom of the checkouts table.
4/ Remove the pref
DELETE FROM systempreferences WHERE variable='ExportCircHistory';
and reinsert the previous one, with a value:
INSERT INTO systempreferences (variable, value) VALUES
('ExportWithCsvProfile', 'something');
Execute the DB entry again
=> The now pref should be now set
5/ Export some checkouts using the CSV entry
6/ Note that the export tool and commandline script still work using the
csv format. You have to provide a --csv_profile_id option to make it
work.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We should do the same for the other check (FA exists), but cannot find a
good and quick way to implement.
Doing it this way will avoid regression later, we will no have to check
if the variable is correctly passed to the template.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit: Fast cataloging link should now show on all pages, removed offline circulation links
Edit 2: Creates the syspref to activate or deactivate the sidebar
Edit 3: Fixing merge conflicts, using Koha::BiblioFrameworks to find FA
framework and adding sidebar to on-site checkouts
This adds a sidebar to
circ/branchoverdues.tt
circ/circulation.tt (I also fixed up some of the indentation in this file to make it easier to see where the divs started and ended)
circ/renew.tt
circ/returns.tt
circ/selectbranchprinter.tt
circ/transferstoreceive.tt
circ/view_holdsqueue.tt
circ/waitingreserves.tt
circ/branchtransfers.tt
circ/on-site_checkouts.tt
To test:
1) Confirm syspref CircSidebar is activated
2) Go to all of the above pages and confirm the sidebar menu shows up
3) Confirm fast cataloguing link and transfer link are there
4) Trigger any error messages you can possibly think of (i.e. on renew.pl: barcode does not exist). Confirm that this does not mess up the layout of the page
5) Go to a user account page, Check out tab. (Since this is a circ/circulation.pl page). Ensure the circ nav sidebar doesn't show up (confirm it looks as it usually does)
6) Deactivate circSidebar
7) Confirm pages all look normal
Sponsored-by: Catalyst IT
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When an item from Library A is reserved and set to be picked up at
Library B, the hold buttons fail to confirm or cancel during check in at
Library B when the item is transferred from Library A.
Test plan:
* Create a hold for item at Library A to be picked up at Library B.
* Check in item at Library A to trigger the transfer.
=> item shows in transit
* Switch to Library B and check in item.
* Confirm the hold.
=> item shows waiting
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes made:
- remove obsolete comment in pendingreserves.pl
- use Modern::Perl in circ/pendingreserves.pl
- get rid of unusable param run_report - followup for bug 8454
- get rid of references to hold status - followup for bug 9320
- remove unused data from SQL and reservedata structure
Test plan:
1) Apply patch from bug 18073
2) Apply patch on this bug
3) Enable on shelf hold in administration -> circulation and fines rules
4) Create some holds on avalaible items
5) Confirm that circulation -> holds to pull page works as expected
6) Try to find any regression
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) apply the patch
1) enable on shelf hold in administration -> circulation and fines rules
2) create some holds on avalaible items
3) go to administration -> columns settings and confirm there is new holds-to-pull table in circulation section
4) go to circulation -> holds to pull page and confirm that
4a) that the page does work as before
4b) there is ne "Column visibility" button in datatable toolbar
4c) the column configuration does work as expected
4d) there is new column "First patron" with link to patron which is
first in holds queue for given record
4e) sorting works ax expected
4f) filters (in teh bottom of table) work as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works nicely!
https://bugs.koha-community.org/show_bug.cgi?id=18079
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
`git grep ManualLocation` does not return any results
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On previous bugs
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The GetMemberIssuesAndFines subroutine used to retrieve the issues,
overdues and fines for a given patron. Most of the time, only 1 or 2 of
these values were used.
This patch removes this subroutine and uses the new get_issues,
get_overdues and get_balance method from Koha::Patron and Koha::Account::Lines.
Test plan:
1/ Add overdues, issues and fines to different patrons
2/ On the checkout, checkin and patron search result and the patron
detail pages, these 3 informations, if displayed before this patch, must be
correctly displayed.
3/ Use the batch patron deletion tool and make sure that patrons with a
balance > 0 are not deleted
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ignoring the pluralization or lack thereof:
$ git grep "Koha::Issue"
-- This has results.
But this was renamed by 17796, and supposedly still
in discussion in 16870.
apply this patch, and do the same git.
There will be no results.
This was found while running a prove t/db_dependent/00-strict.t
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply patch
2) Checkout more then one item to a borrower
3) Check one of that items
4) Note, that on in returns table there is a button with number of
outstanding issues in patron column. The button should take you to checking
out page
5) When the outstanding issues count is 0, there is no button
Signed-off-by: Radek Šiman <rbit@rbit.cz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All the values different from the ones GetMember returned has been
managed outside of GetMemberDetails.
It looks safe to replace all the occurrences of GetMemberDetails with
GetMember.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as authflags, a flags key is set containing all the patron flags.
It is only used in a few places and it's better to call
C4::Members::patronflags when we need it.
Test plan:
Look at the diff and confirm that the change make sense
Use git grep to confirm we do not use the flags somewhere else.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Number of tests in Patrons.t corrected.
Method is_going_to_expired (no english!) renamed to is_going_to_expire.
Adding a negative duration replaced by a subtract. Reads easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to be consistent, we need to create this method as well.
Test plan:
Make sure the pref NotifyBorrowerDeparture works as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17579 introduces a Koha::Patron->is_expired method.
Let's use it from this script.
Test plan:
Confirm that you see the message on the interface from the circulation
page for an expired patron
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
