Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No errors.
Tested what I can, not plack/shibboleth/cas
Perhaps this can pass and we can fix any problem later (for 3.22)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the instruction to separate values by | in the
OpacExportOptions preference.
To test:
Go to system preferences
Find OpacExportOptions
Confirm text is right
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Test output compliant with expected test plan outcome.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed "List" to "Select" and removed a space before the : at the end.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If an error occurs in patron batch modification, a message similar to the following is displayed:
Can not update patron with borrowernumber 7055
It would be useful to have the cardnumber as well.
This patch adds the card number to the lists of errors.
It is not easy to trigger an error (see comments).
For testing, I tweaked the sub ModMember in C4/Members.pm to always return false.
TEST PLAN
---------
1) Log in as a superlibrarian and create a test user
2) Change the cardnumber to a number differing from the
borrower number.
3) Home -> Tools -> Batch patron modification
4) Type in the cardnumber of that test user
5) Check the Library checkbox.
6) Click Save
-- nice error, but it is borrower number instead of
the card number which was entered.
7) Apply the patch
8) Repeat steps 3-6
-- nice error, but it is now more informative.
9) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes scrolling_lists from this file
To test
1) Go to Reports > Average loan time
2) Check dropdowns Patron category, Item type, Sort1/2 and Into application
will be changed
3) Apply the patch
4) Reload and check for regression
Followed test plan. Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch replaces trim() with $.trim() in admin/categorie.tt, as
$.trim() is more cross-platform (ie it is supported in "< IE9").
_TEST PLAN_
Before applying patch:
0) Use IE 8 or use Document Mode 8 in a newer IE using F12 Developer Tools
1) Go to Administration > Patron categories
2) Click "Edit" next to a category
3) Click "Save" at the bottom
4) Note the form doesn't submit (you can also notice the error in the
console log)
Apply the patch:
5) Hold down shift + refresh the page
6) Click "Save" at the bottom"
7) Note that the form does submit and there are no errors reported
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
No regression found using iceweasel.
I did not know the staff interface was IE compatible.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The original concern of bug 14266 was to provide a compatibility for
<IE9.
But actually we don't need to trim the email address template side.
It will even better to trim it in the perl script, so that the email
will be trimed even if JS is disabled.
Test plan:
1/ Share a list and does not provide any email address
2/ Submit
=> The form is not submited, no alert/message is displayed (same as
before this patch).
3/ Share a list and provide an email address with spaces before and
after
4/ Submit
=> You should receive the email
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Test output compliant with expected test plan outcome.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch replaces trim() with $.trim() which is supported
in versions of IE older than IE9.
Revised test plan
=================
Before applying patch:
0) Use IE 8 or Document Mode 8 in a newer IE using F12 Developer Tools
1) Set OpacAllowSharingPrivateLists to "Allow" in Global System Preferences
2) Create a private list in the OPAC
3) Add a record to the private list
4) Click "Share" or "Share list" on one of the list screens
5) Type in an email address and click "Send"
6) Note the error in the console log
7) The page should submit
Apply the patch:
7) Hold shift + refresh the browser to update any Javascript cache
8) Try to "Share" the list again
9) Note that the form submit after clicking "Send" and
that there are no errors in the console log
http://bugs.koha-community.org/show_bug.cgi?id=14266
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Remarks: Works as per revised test plan
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The order status after closing the basket is 'ordered' in the
database, but displays as 'pending' in the staff interface.
As we use 'pending' when you have to review a suggestion, this
clashes in translations and the meaning is different. The patch
renames 'pending' for the order status to 'Ordered' to be more
clear.
To test:
- Verfiy 'Ordered' shows in the pull down on the acq advanced
search and search still works correctly
- Verify the results table also display 'Ordered' as the status
Signed-off-by: Cédric Vita <cedric.vita@dracenie.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Remove an instance of CGI::scrolling_list from this file
To test:
1) Go to Reports, Guided report wizard, New SQL report
2) Create a report with some auth value list, e.g.
SELECT surname,firstname FROM borrowers WHERE branchcode=<<Enter patrons library|branches>>
Save
3) Clic on 'Run this report", look at the dropdown, that will be changed
4) Apply the patch
5) Reload, check dropdown and any regression
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
See: http://wiki.koha-community.org/wiki/Roles_for_3.22
The 3.20 roles are moved to the Development section. Note that we did
not add the Bug wranglers role under Development until now. If that
should change, please provide a follow-up.
Test plan:
Verify that all roles are covered correctly.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Seems correct for me, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As Jonathan Druart discovered, we were still missing an important attribute
in the selects. Var mv.name was not filled, so the name was empty with nice
side-effects :)
While fixing this, it was also possible to delete some unused vars that Bernardo
already mentioned before: $attributes and $attributes_no_value.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
For me the simptom was different, when saving an edited item
fields were mangled beyond repear :(
No alert for empty mandatory fields.
But this last patch fix the problem.
Tested add/edit items
Cleaner pl file :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
While cleaning up, still found this super tiny string typo :)
Yes, Tag Editor should now be Tag editor.
Test plan :)
Git grep on Tag editor and Tag Editor
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adjusting a few small things and making qa tools happy:
[1] Remove .hidden after [% avalue %] in additem.tt. (Typo)
[2] A closer look revealed that mv.avalue is useless too. An input element
does not contain any content. Putting it after the hidden element
in a non-visible context has no meaning.
[3] Change handling of select attributes readonly and disabled.
[4] Remove unused variable $attributes_no_value_textarea
[5] Removed a comment with TODO referring to this report.
[6] Moving a duplicated TT variable (mv.javascript) outside IF statement.
[7] And finally could not resist this one: Moving strings Tag editor and
No popup from script to template. Plugins++
NOTE: Most item plugins redirect click to focus. In that case there is
no popup, but unfortunately the text Tag editor comes up.
When you remove or rename function Click, No popup comes up. So it works.
Sorry that this small list kept growing :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes HTML code from additem.pl.
To test:
1. Check no regressions on Add/Edit/Save items
2. Update translation files for a language,
check new strings "Tag editor" & "No popup" on staff PO file
3. Check it passes xt/tt_valid.t
Patch partially rebased, part rewritten.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Same as previous patch for opacuserjs
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the programmer unaware of case-insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To match IntranetUserCSS, intranetuserjs should be renamed
IntranetUserJS.
Test plan:
1/ Be sure there is no occurrence of intranetuserjs
2/ Confirm the pref still works as before
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the person unaware of case insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The display of links found in 856$u for NORMARC has not been keeping up with
the one for MARC21, and several sysprefs have not been implemented. This
patch tries to fix that.
Affected sysprefs:
- OPACURLOpenInNewWindow
- URLLinkText
- OPACDisplay856uAsImage
- OPACTrackClicks
To test:
- Make sure you have a record with a URL in 856$u and marcflavor = NORMARC.
(It does not have to be a full NORMARC setup or a NORMARC record, just make
sure you are viewing the record through the NORMARC XSLT files.)
- View the record both in a result list and in detail view
- Check that the 4 involved sysprefs affect the display in the expected ways
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on NORMARC setup and XSLTs
Works as described, each syspref works
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Since it only affects NORMAC, I trust in Magnus :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Updates columns.def with new columns in items
- Adds some descriptions
- Corrects some existing column descrpitions
To test:
- Read the patch to see what has been changed
- Run the guided report builder for the 'circulation'
module
- Observe changes show up
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Changes show up, no errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a note to the IdRef service syspref making it
clear that the feature is only available for UNIMARC setups.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Added a missing 'is'
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Unclosed <option>
To test:
1) Unimarc install
2) Edit a record
3) Edit 116 field, 10 position, Technique (prints) 3
4) Select litography, save
5) Run plugin again, will see litography/option>
6) Apply the patch
7) Check again, now is right (clean cache)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch will resolve the issue of not being able to
search with parens in a subject heading by editing the xslt
To test:
* Apply patch
* Search Koha for a title with ( ) in the subject
* Click the subject
* Results should be returned
* Repeat in OPAC and Staff client
Signed-off-by: Nick <Nick@quechelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you click the plugin next to an authority field that is already
populated it takes the values from the field and puts them in the search
in the reverse order.
Test plan:
1/ Edit a biblio
2/ Fill the subfield for an authority field (for instance 650$v, 650$x,
650$y, etc.)
3/ Click on the authority plugin
Before this patch, the values were concatenated in the reverse order.
With this patch, it should not.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The branchcode and categorycode parameter names are too common and are
confusing.
To remove the ambiguity, this patch renames them with branchcode_filter
and categorycode_filter.
Test plan:
1/ Go on the patron home page (members-home.pl)
2/ Fill the library and category dropdown list in the header search
3/ The patron result list appears and the filters (on the right) are
correctly set with what you have selected.
Make sure the ones in the header are also correctly selected.
4/ Click on a patron
5/ On the patron detail page (moremember.pl), the dropdown lists in the
header are not preselected.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A lot of page uses the patron search box header include (git grep
patron-search.inc for the list) and the branch and category lists are
not generated for all of them.
For instance, on a patron detail page, there is a [+] link, but nothing
append on clicking on it.
This patch add a new template plugin "Categories" to get all patron
categories from the templates.
Test plan:
1/ Verify the [+] is working on all patron page (if that works for 2,
that should work for all).
2/ Launch a search from the header box and verify the library and
category dropdown lists select the correct value.
3/ Launch a search on the patron search page (patron home) and verify
the search is working correctly on selecting a category and/or a library
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The default authority type cannot be defined.
The authtypecode is en empty string and the tests should be done on
"defined", not "exist".
Test plan:
Edit the default authority type, save it.
Note: There is no way to create an authority with an empty string, with
you deleted you won't be able to recreate it.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A code change for report 10480 in cataloging.js does not work well in case
you clone a field with a plugin on a subfield.
The events (click, focus, etc.) do not work on the subfield of the clone.
This patch corrects the situation by finding the right html element for
adding event binding.
NOTE: The test plan uses EXAMPLE.pl since many old plugins do not operate
on the correct field value when cloning. This is corrected in bug 13437.
Test plan:
[1] Attach EXAMPLE.pl to field 007, 246h and 260c.
In sql for 007: update marc_subfield_structure set
value_builder='EXAMPLE.pl' where tagfield='007' and tagsubfield='@';
[2] Clone field 007. Verify that focus and click operate on both fields.
Check also that the plugin works on the value corresponding with
the button you clicked.
[3] Clone field 246. Do the same checks on both subfields $h.
[4] Clone subfield 260c. Do the same checks again.
Test Remarks:
============
1/ Setup a new framework (B213) based off 'Default' and fired off
an SQL statement to update value_builder values for 007, 246$h
and 269$c (UPDATE `marc_subfield_structure` SET value_builder
= 'EXAMPLE.pl' WHERE frameworkcode = 'B213' AND ( (tagfield =
'007' AND tagsubfield = '@') OR ( tagfield LIKE '246' AND
tagsubfield = 'h') OR (tagfield = '260' AND tagsubfield = 'c'))
2/ Tested step 2, 3 and 4 of the given test plan above. The missing
plugin support in the cloned fields were noted.
3/ Applied patch
4/ Re-tested steps 2, 3 and 4 as before. The defined plugins were
correctly cloned and found to be functional.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Magnus is alone, no errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is a condition in the template to not display the "New" tab if the
user is editing a control field.
But it results in a broken template.
Looking at the biblio frameworks, the New tab exists even for control
fields.
This patch only fixes the html structure, but a complete fix should be
provide, for auth and biblio, if we want not to let the ability to
create subfields for control fields.
Test plan:
Edit subfields for a control field
(admin/marc_subfields_structure.pl?op=add_form&tagfield=001&frameworkcode= for instance)
and confirm that the view is now fixed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Checked LDR, 001, and 008.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This code causes the installer to re-check dependencies during the
upgrade process.
Test Plan
---------
1) Log in to staff client
2) Koha Administration -> Global system preferences -> Local
3) Change Version to previous version -- DO NOT HIT SAVE YET!
4) In command line: sudo apt-get purge libpdf-fromhtml-perl
NOTE: This could be ANY required library. I chose
PDF::FromHTML, because it has been a thorn in my side.
5) NOW! Hit the 'Save' button.
6) Log in, etc. etc...
-- Blows up on redirect to log in.
7) In command line, add it back (I had to compile my own so,
I used sudo dpkg -i /path/to/libpdf-fromhtml-perl...)
8) Apply patch
9) Edit the C4/Installer/PerlDependencies.pm to make
PDF::FromHTML required. See also bug 14103.
10) Log in to staff client
11) Koha Administration -> Global system preferences -> Local
12) Change Version to previous version -- DO NOT HIT SAVE YET!
13) In command line: sudo apt-get purge libpdf-fromhtml-perl
14) NOW! Hit the 'Save' button.
15) Log in, etc. etc...
16) Once warned you are missing it, add it back at the command line.
17) Click 'Recheck'
-- Proceeds as expected now.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A wrong variable scope was used here, the number value is contained in
the BIG_LOOP (note for later: change this variable name...).
Test plan:
1/ Define 1+ mandatory fields for an authority type
2/ Create an authority and don't fill the mandatory fields
3/ Try to save: the popup alert should display the number of the tab.
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The text for the marc field are truncated to 22 chars when displaying an
error on mandatory fields.
This limitation is useless and this patch removes it.
Test plan:
Create a mandatory subfield and set a long text (more than 22 chars)
edit or add an authority, click on save.
You should get the error displayed with the full text
Note that this patch modifies the same code for biblio.
Test plan is the same for biblio.
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tested wit OPAC, full list is printed.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The print list button only prints the page you are viewing, and not the
entire list.
Test Plan:
1) Apply this patch
2) Create a list with enough items that it will paginate
3) Browse to that list, click the 'print list' button
4) Note the entire list prints, not just the visible items
Tested in staff client, works as expected.
It would be great to have the same for OPAC as well (OPAC still prints first page only).
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This condition is never reached, the confirmation to delete a basket is
done with a popup in the template.
Test plan:
Confirm you don't find any regression when creation/editing and deleting
a basket.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I didn't create or edit. However, the only perl script that uses
the template is acqui/basket.pl and the only place delete_confirm
is set in acqui/basket.pl is in that code which is only called if
del_basket actually existed anywhere else, which it doesn't.
I did have two baskets, one with two transfers from the first, so
I transferred one back, and then proceeded to test the two delete
buttons in the modal. No issues. Cancel (to close the modal) works
too.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no way to search for local use prefs.
This patch provides an easy way to search for pref present in
of local use prefs table.
Test plan:
1/ Go on the system preferences administration page
2/ Click on the Local Use table
3/ Confirm you are able to filter the table by pref name or description
using the DataTables filters on top of it.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Local use tab is distinct from other tabs, so implementing
'Search system preferences' across all tabs would be very
difficult. This patch adds a filter to the Local Use tab,
which nicely allows for filtering, as per Owen's suggestion
in comment #1.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There was a [ % END %] which triggered template parsing errors.
Follow the test plan in comment #7 with both patches applied.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On importing authority records, the items related string should not be
displayed.
Test plan:
1/ Import an authority record
2/ Confirm the item related string are not displayed.
3/ Before this script, the record_type param was lost just after
importing the records. Now you should see
"Processing authority records" of "Processing bibliographic records" in
the "MARC staging results"
4/ Revert the import and check there is not item related strings.
No behavior should exist on importing bibliographic records.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes two files, serials-recieve.pl and serial-recieve.tt
serials-recieve.pl is not called anyware
(it's recieve!)
Also removes the sub removeMissingIssue called only from serials-recieve.pl
git grep serials-recieve.pl .
C4/Serials.pm:called when a missing issue is found from the serials-recieve.pl file
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f" action="serials-recieve.pl" onsubmit="return barcode_check()">
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f2" action="serials-recieve.pl">
serials/serials-recieve.pl:serials-recieve.pl
Just a POD entry and self reference.
After removing of files
git grep removeMissingIssue .
C4/Serials.pm: &check_routing &updateClaim &removeMissingIssue
C4/Serials.pm:=head2 removeMissingIssue
C4/Serials.pm:removeMissingIssue($subscriptionid)
C4/Serials.pm:sub removeMissingIssue {
t/db_dependent/Serials.t:is(C4::Serials::removeMissingIssue(), undef, 'test removing a missing issue');
Not used anymore
To test:
1) Apply the patch
2) Check serials workflow, no changes must be noted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes unused code:
* barcode_check() function, with untranslatable strings
* commented call to this function
To test:
1. Apply the patch
2. Check serials receive, no changes shall be detected
NOTE: I did not run this test plan.
Verification steps
------------------
1. Find out where barcode_check is used.
$ git grep barcode_check
-- This is only in serials-edit.tt and serials-receive.tt
2. This patch only affects serials-edit.tt, so
check who put the <!--onsubmit="return barcode_check()">-->
$ git blame -L130 koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-edit.tt
-- note the commit related number.
3. Check out the commit.
$ git show 77b64098
-- should show bug 5917, but the patches on bugzilla don't
have the change nicely, so...
4. Hunt through the pages to find the change.
-- Note: it is part of a "new file" diff!
5. Since this code hasn't been running since it was added...
6. apply the patch
7. run koha-qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
'AUTH_UPDATE_FAILED' in moremember.tt is never set and should be removed (see comment #6 on Bug 13910).
To verify: git grep 'AUTH_UPDATE_FAILED'
Result: Only one occurence (in moremember.tt)
Test plan:
- Apply patch (on top of Bug 13910)
- Verify that the part with AUTH_UPDATE_FAILED is removed from moremember.tt
- Go to a patron's detail page and verify that nothing is broken (Home > Patrons > Patrons details for...)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This has been introduced by
commit 1a91801b06
Date: Sat Dec 1 20:56:27 2007 -0600
Add Staff member type. Add permissions checks for bug# 1269
and related permissions on memberentry and mods.
But was already not used...
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As of comment #6
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This should be fixed in a separate patch, this error is not sent to the
template and the related code could be removed.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a check to prevent deleting the user's own account.
Additionali it fixes a "missing link" in moremember.pl and wrong comparisions in moremember.tt regarding other forbidden deleting.
To test:
- Apply patch
- Create a user with sufficient privileges to delete users
- Log in as this new user
- Try to delete this user. Confirm message box "Are you sure..."
- Confirm that you get a message "Not allowed to delete own account" and that the user still exists.
Bonus test:
Try to trigger other forbidden deletions (see members/deletemem.pl): 'CANT_DELETE_STAFF', 'CANT_DELETE_OTHERLIBRARY', 'CANT_DELETE'
(You can fake it by using an URL like: /cgi-bin/koha/members/moremember.pl?borrowernumber=115&error=CANT_DELETE_STAFF etc.)
Without patch, no message appears. With patch, messages appear as appropriate.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Attempted all CANT combinations. From reading the code,
this is kind of an important patch, because I'm not sure
deleting error messages work at all right now based on what
I read.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The vendor and Record input try to sent the form if the focus is on the
inputs (normal behavior).
But the form is on 2 pages, and the popup message ask you to fill info
on the second page when you are on the first one. This does not make
sense.
This patch suggests to launch search when the enter key is press on
these inputs.
Test plan:
1/ Create a new subscription
2/ Put the focus in the Vendor input and press enter: the vendor search
popup should appear
3/ Put the focus in the Record input and press enter: the record search
popup should appear
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
One of the dates (suggested on) in the list of
suggestions in staff is not correctly formatted.
To test:
- Create one or many suggestions
- Check the list of suggestion, especially in the
'Suggested by - on' column
- Verify the date is not displayed according to
the dateformat preference
- Apply patch
- Verify the problem is fixed
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a subscription is irregular, a tab with "manage" is displayed on the
serial collection page.
But this string is not translatable.
Test plan:
1/ Go on the serial collection page of an irregular subscription (or
create one).
2/ Note that the first tab was named "managed", it's now "Manage".
3/ Update a po lang file and confirm you see the string and you are able
to translate it.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The tile displayed only with steps #1 and #2
This patch adds the title to the following steps.
To test:
Home > Reports
Click on 'Build new'
Step through steps 1 - 6
Verify that title displays with each step.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To verify and test:
Go to Home > Reports
Click on 'Build new'
Verify that the title in Step 1 and to display with correct capitalization
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The preference was missing a 'd' in the word address.
To test:
* Visit preferences
* Visit I18N/L10N tab
* Confirm spelling of options in Addressformat preference
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Spelling is right, no errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently batch_id is assigned upon creation of a new batch object. This patch leaves batch_id as 0 at creation and adds a check when adding items. If batch is new then batch_id is created then
Test plan:
1 -In one browser window, go to tools->label creator and click the new batch button
2 - Before adding items, open a new browser, and go tools->label creator and click the new batch button
3 - Note that both batches have the same number listed
4 - Add an item to the first batch - you should now see one item in the batch
5 - Add an item to the second batch, you should see two items in the batch
6 - Apply patch and repeat steps 1&2
7 - Note that neither batch lists a batch number
8 - Add an item to the first batch, you should see one item and a batch number
9 - Add an item to the second batch, you should see one item and a new batch number
Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the home made pagination and introduces datatables on
this page.
Test plan:
Go to the authority type admin page and confirm there is a beautiful
table.
Confirmed...
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The reports dictionary allows the user to select several fields, but
only 1 is used.
The interface is quite confusing.
This patch removes the multiple selection and permit to select only 1
field.
Test plan:
1/ Create a report dictionary (reports/dictionary.pl)
2/ On the step 3, confirm that only 1 field can be selected
Confirm there is no regression on this tool.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sometime you get the "Nothing to save" message when clicking on the "save
all preferences" button, even if something has changed.
On irritating behavior is the middle click: if you use the middle click
to paste some text in the input, the "keyup" event won't be trigger.
This patch replaces the "keyup" event with the "change", which works
as we want here.
The issues:
1/ Search for "wanted" (admin/preferences.pl?op=search&searchfield=wanted)
Empty the input, click save
Type something and remove it
You are able to save, but nothing has changed
2/ Put something in your selection buffer and use the middle click to
paste it in the input.
No change detected.
Test plan:
Confirm the issues are fixed and you don't find any regression
Note that now the "(modified)" string is displayed when the input loses
the focus.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that the previous patch does not stop the propagation of the
event if the link is clicked with the left button (which=1).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The browse results feature (bug 10404) modified the click events on
titles on the search result page (intranet).
It introduced bad behaviors:
1/ ctrl+click on a title does not open a new tab
2/ middle click on a title does open a new tab but the browser is not
displayed.
Note that this patch is not perfect, it fixes the 2 bad behaviors but
the ctrl+click gives the focus to the new tab (could go against the
preferences of the users).
Test plan:
1/ On the staff interface, launch a search (catalogue/search.pl?q=XXX)
2/ When middle-clicking on a title, a new tab should open. On this tab
the browse result feature should be displayed
3/ Same for cltr+click
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Page uses TAGS Directive in order to print TT directives
in the manual without having them interpreted, but fails
to switch back/change all following TT code, causing
problems in displaying the file correctly.
See TT documentation:
http://www.template-toolkit.org/docs/manual/Directives.html#section_TAGS
As [- ... -] showed up in translations, I chose to switch back
instead of changing the TT variable and INCLUDE.
To test:
- Go to tools > csv profiles
- Open the help page
- Verify the link to the manual includes the version and works
- Verify the footer shows up correctly with the edit buttons
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The phrase
Please type this following characters into the preceding box
should be
Please type the following characters into the preceding box
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes some minor display issues in 'Add order from a suggestion'
To test:
- Add order form a suggestion
- The copyright date iss dispayed like 'copy.year:2015'
- Apply patch
- The copyright date now displays as (copyright sign) 2014, similar to the display in suggestion management
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The trick to update the suggestions table width is outdated since jQuery
UI has been updated.
Test plan:
0/ Don't apply this patch
1/ Go on the suggestions page (suggestion/suggestion.pl), change tabs:
the table width is wrong
2/ Apply this patch
4/ Repeat 1 and confirm the width is now updated.
Signed-off-by: Christopher Brannon <cbrannon@cdalibary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The table sizes still vary slightly, but this is an improvement.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The file templates.readme dates back to CSV and
HTML::Template times and is outdated.
To test:
- Verify the file is outdated and removed by this patch.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
If noone spotted the outdatedness of this file until now I
agree with Katrin that we should get rid of it and maybe
create something similar in the wiki. The patch works as
advertised.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the OPAC and the intranet, the urls don't be displayed anymore.
The variables used in the templates are not the good ones (MARCurlS vs
MARCURLS).
Test plan:
1/ On the intranet side, add some urls to some records
2/ Add these records to the basket
3/ Add records without urls defined
4/ Go on the basket view, click "more details"
5/ You should see the urls displayed
6/ Repeat steps 4-5 at the OPAC
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: 856$u displays now in intranet and OPAC. :)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The "Date Due" column for checkouts is using the column index 1 to sort by.
This column is the one that is used for grouping items into today's checkouts
and previous checkouts. This is definitely not the column that should be used.
Instead, we should be using column index 2, which contains the raw unformatted
due date.
Revised Test Plan:
1) Find a patron with no checkouts
2) Check out something as due the beginning on the month.
3) Check out something as due the end of the month.
4) Check out something due tomorrow (hopefully not end of month)
-- so you should have 2015-04-01, 2015-04-30, and 2015-04-14
(for example)
5) Attempt to sort by due date
-- Note the sorting is incorrect
6) Apply this patch
7) Clear your browser cache
8) Reload the page
9) Attempt to sort by due date again
-- Note the sorting works correctly this time
10) Verify there are no regressions with bug 13908
-- this will require finding a patron with many checkouts,
playing with the Circulation system preferences
previousIssuesDefaultSortOrder and todaysIssuesDefaultSortOrder,
and understanding what the four different cases mean with
respect to actually manually sorting the 'Due Date' column.
NOTE: I did not do step 10,
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
change table id in css file
+ C4::Output is used (Undefined subroutine
CGI::output_html_with_http_headers)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
When editing an item, the call number browser search for existing call number. If it shows a line is green between two calli numbers, the call numbers searched is available. If the call number is highlighted in red, it means that it already exists. This can be used to avoid repeated call numbers in your collection.
The call number browser also shows its position relative to the rest of the collection.
Sponsored-by: CCSR
To test :
1) Go to MARC bibliographic framework
Home › Administration › MARC frameworks
2) Click in MARC structure (Default framework)
3) Search field 952 and click in subfields
4) Edit subfield o (Full call number)
5) Click Display more constraints
6) In Others Options, Plugin, Choose cn_browser.pl and save changes
7) Search a record and edit its items
Validate : three points (…) beside Full call number input
8) Click in …
Validate : if it can not find the given call number, a green line is shown. Otherwise, the given call number is highlighted in red.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Magnus <magnus@enger.priv.no>
Works as advertised. QA scripts pass.
Tested together with other patches. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - fix datatables.inc
http://bugs.koha-community.org/show_bug.cgi?id=13364
Signed-off-by: Magnus <magnus@enger.priv.no>
Works as advertised. QA scripts pass.
Tested together with other patches, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - Add a call number browser in item edition page - QA fixed
Tested together with other patches.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - Add a call number browser in item edition page - QA fixed II
Tested together with oter patches.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch just inserts a semi-colon into the description so that it makes more grammatical sense.
Test plan:
1) Go to Tools --> Calendar
2) Create or find a holiday, click on it so the editing options come up
3) Click on the question mark link to show the description for the option "Delete the exceptions on a range"
4) Confirm that this now has a semi-colon and reads "... Be careful about your scope range; if it is oversized you could slow down Koha."
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This path fixes the typo.
To reproduce and test:
Go to a patron's detail page
The message appears as hint in column-header 'Digests only (i)'
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This bug fixes capitalization of "No, Do Not Delete" in following templates:
koha-tmpl/intranet-tmpl/prog/en/modules/admin/authtypes.tt
koha-tmpl/intranet-tmpl/prog/en/modules/admin/classsources.tt
koha-tmpl/intranet-tmpl/prog/en/modules/admin/currency.tt
koha-tmpl/intranet-tmpl/prog/en/modules/admin/marctagstructure.tt
koha-tmpl/intranet-tmpl/prog/en/modules/admin/matching-rules.tt
koha-tmpl/intranet-tmpl/prog/en/modules/admin/patron-attr-types.tt
koha-tmpl/intranet-tmpl/prog/en/modules/admin/stopwords.tt
To test: Verify that the strings are properly replaced.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A typo found while doing translation:
To test
1) Go to dir 'intranet-tmpl/prog/en/modules/acqui/neworderempty.tt'
line 268 and check the typo "To notify on reveiving:"
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In a couple of patron searches, the address is displayed.
If the address contain invalid json characters, DataTables won't manage
to parse the results and display them.
This patch makes the templates more readable by creating a BLOCK instead
of a long line and escape the invalid json characters calling the TT
plugin (To.json).
Test plan:
Edit a patron and add something like:
patron <address> \123 ☎ ⚑
in the address field.
Search for this patron using the main patron search (members/member.pl)
and the guarantor search.
Confirm that a result with this patron is correctly displayed.
Regression test: Since Koha::Template::Plugin::To::json is modified,
confirm that the add users to basket search (on acqui/basket.pl?basketno=X
click on the "Add user" button) still works as expected.
Signed-off-by: Christopher Brannon <cbrannon@cdalibary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removes extraneous stuff from prints - toolbars, breadcrumbs, etc.
To test:
1. make a list
2. print it to a file (from OPAC), observe wasted paper
3. apply patch
4. print list, compare
5. if you like it, sign off. ;)
Patch cleans up OPAC list printing as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
NOTE: Made functional again. Turns out my issues were a result of
cached CSS pages. Tested in IE and Firefox successfully.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Show suggestion number on suggestion management.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
After editing an item on receiving, 'null' is displayed if no value is
defined for a field. It should be blank.
Test plan:
0/ Set AcqCreateItem to 'ordering'
1/ Go on the receipt page page
2/ Edit an item
3/ Does not fill all values
4/ Confirm that undefined values are replaced with an empty string
NOTE: I think you meant receive. Editing requires at least clicking
the dropdown value, even if you don't change it before
clicking save. null's appeared. Post patch application was
able to get nulls to disappear. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1/ Execute the updatedb entry
2/ Create a list
3/ Go on the shelve list and confirm that the creation and last
modification time are now displayed.
4/ Confirm that you are able to sort the list by creation/modification
time.
Applied on top of 13419 (rebased updatedatabase.pl)
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds stocknumber (named Inventory number in interface)
to details table and items display if it exists.
Test scenario:
1. find item(s) which have inventory number assigned
2. verify that you don't see inventory number in items display
3. apply this patch
4. verify that inventory number is now available
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Log into staff client
- Find a client with 0 checkouts
- Print a slip (or cancel printing it)
- Attempt to type in a barcode to checkout
-- annoying modal screen pops up
'barcode submitted' message will be triggered each time
you try
To test:
- apply patch
- try to reproduce issue
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The due dates should be displayed as due dates :)
i.e not displayed with 23:59
On the way, this patch fixes the sort on the info column.
The column is now sorted using the due dates
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the DT filter, the caption is between the table and the filter.
It looks better with the caption as a h2 on top of the table.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1/ Add the information 'showing x to y of z'
2/ Remove some lost pixels
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds datatables functionality to the item specific holds table
To test:
1 - Apply patch
2 - Attempt to place an item specific hold for a patron
3 - Note that columns are now sortable and searchable
4 - Ensure that you can place both specific and next available holds as before
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds information about cron jobs performed and make it viewable
under Home > Tools > Logs ("Browse system logs")
To test:
Apply patch
- Got to system preferences and set 'CronjobLog' to: [Log] information from
cron jobs.
- Run some cron jobs
- Go to Home > Tools > Logs
- Verify that you have a selection 'Cron jobs' in drop-down 'Module'. Select it
with Action "All" and Submit.
- Output should show Date/time and info about Cron jobs
Rebased to work on top of Bug 6911 (conflict in viewlog.tt) /MV
Rebased after applying patch for Bug 6911 /MV
Conflicts resolved:
misc/cronjobs/overdue_notices.pl
misc/cronjobs/cleanup_database.pl
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
- Merge both patches, and fix updatedatabase.pl
- Works as described. Provide intersting feedback from cronjob scripts.
--
Modified version taking in account syspref CronJobLog. Handling simplified by introducing a convenience sub cronlogaction in C4/Log.pm /MV
Amended to take in account comments #11, #12, #13 /MV
http://bugs.koha-community.org/show_bug.cgi?id=13899
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a merge button and checkboxes to the cataloging search results screen to allow librarians to merge directly from these reults
To test:
1 - Apply patch
2 - Perform a cataloging search
3 - Try to select 1 or more than 2 records to merge and check that you get an error
4 - Select 2 records to merge and confirm the correct records are passed to the merge tool
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When viewing the list of a patron's holds from the circulation or patron
detail page the pickup library is not listed. This patch adds a column
to the table of holds which shows the pickup branch.
This patch also removes some unnecessary markup from the generation of
the table and corrects an instance where the term "reserve" was used
instead of "hold."
This patch also modifies the language describing an item which is marked
waiting at the current library: "Item is waiting here" instead of "Item
waiting."
To test, add several holds to a patron's account with various pickup
locations.
- Confirm that those pickup locations are correctly displayed
under the Holds tab in Circulation.
- Check in and confirm a hold which is to be picked up at the current
branch. Confirm that the revised language appears.
- Confirm that table sorting works correctly.
Signed-off-by: Nick <Nick@quechelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If items are created on ordering, the quantity for uncertain prices
should not be editable.
Test plan:
0/ Set AcqCreateItem to "on ordering"
1/ Create a basket and add an order with 1+ items
2/ Mark it as uncertain prices
3/ Go on the uncertain prices page for this vendor
(acqui/uncertainprice.pl?booksellerid=X)
4/ Confirm you are not allowed to update the quantity
5/ Change the price and save
6/ Confirm the quantity is still correct
Set the pref to another value and confirm the behavior has not changed.
NOTE: Tested with 'on placing order' and 'on receiving order'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes the following changes:
1) If there is no logged in patron, the RSS link states it is for
system-wide news.
2) If a patron is logged in, the RSS link states it is for system-wide
news *and* news for the patron's home library.
3) The patron's home branch code is embedded in the RSS feed url so
he or she no longer needs to be logged in for us to know what branch's
news to pull.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes an invalid URL when clicking
on RSS feed.
To test:
1) Using Nicole words :)
If you visit : http://mykoha/cgi-bin/koha/opac-main.pl
then the RSS feed works.
If you're on http://mykoha and you click the rss icon you
get : http://mykoha/opac-news-rss.pl which is a 404 page.
2) Apply the patch
3) Repeat 1, error is now fixed
Signed-off-by: Pierre <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The RSS button used to read ' RSS for the librarys general newsfeed.'
This included one grammatical error and I think included more words
than most average people would read. This patch simplifies it to say
'RSS for Library News.'
To test:
* Apply all patches
* Review RSS feed button's text on main page under news
http://bugs.koha-community.org/show_bug.cgi?id=7843
Signed-off-by: Pierre <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1/ use strict and warnings are useless, Modern::Perl is used
2/ Prefer to use the interface and theme TT var instead of the hard
coded path
Signed-off-by: Pierre <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
* Install the patch
* Make shure there is news in the Opac
* Go to the Opac (opac-main.pl)
* Make shure you see an RSS icon below the news and a short text.
* Click the RSS icon and verify that you get an RSS feed that validates.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I took the liberty of fixing the copyright statement when signing it off
Signed-off-by: Pierre <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the marc framework page, the checkbox to display only used
tags/subfields is always unchecked.
It should be stored into a cookie to always display the same view.
Test plan:
1/ Go on the marc framework page
2/ Check the checkbox
3/ Go somewhere else on the staff interface
4/ Back to the marc framework page, the checkbox should be checked
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Works as advertised, getting datatables error when using feature
but the error exists pre-patch
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
