Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Plan:
1) Apply dependancies
2) Apply this patch set
3) Run updatedatabase.pl
4) Ensure holdallowed and hold_fulfillment_policy rules behavior remains unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Almost everywhere we call IsAvailableForItemLevelRequest we already have
a Koha::Patron and Koha::Item object. It makes sense to use them to
avoid a refetch
Test plan:
It would be good to test this patch on top of 19300 and 19301 and make
sure everything works as expected
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes remaining cases of the list => scalar change.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Holds/HoldFulfillmentPolicy.t t/db_dependent/Reserves.t
=> FAIL: Tests fail
- Apply this patch
- Run:
k$ prove t/db_dependent/Holds/HoldFulfillmentPolicy.t t/db_dependent/Reserves.t
=> SUCCESS: Tests pass
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
prove -v t/db_dependent/Holds.t
prove -v t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set moves maxissueqty and maxonsiteissueqty to the
circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) prove t/db_dependent/Circulation.t
4) prove t/db_dependent/Circulation/Branch.t
5) prove t/db_dependent/Circulation/GetHardDueDate.t
6) prove t/db_dependent/Circulation/Returns.t
7) prove t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
8) prove t/db_dependent/Circulation/TooMany.t
9) prove t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
10) prove t/db_dependent/Reserves.t
11) Note no changes in circulation behavior related to check out limis
both on and off site
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note: This is here for information purpose, feel free to test it if you
wan to play with it.
TODO: C4::Reserves::_get_itype is not longer in use
No more GetItem must be returned by:
git grep GetItem|grep -v GetItemsAvailableToFillHoldRequestsForBib|grep
-v GetItemsForInventory|grep -v GetItemsInfo|grep -v
GetItemsLocationInfo|grep -v GetItemsInCollection|grep -v
GetItemCourseReservesInfo|grep -v GetItemnumbersFromOrder|grep -v
GetItemSearchField|grep -v GetItemTypesCategorized|grep -v
GetItemNumbersFromImportBatch|cut -d':' -f1|sort|uniq
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new method mock_userenv from t::lib::Mocks in order to
simplify the mock of the userenv.
Test plan:
prove all the test files modified by this patch
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fix t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
items.onloan
`onloan` date DEFAULT NULL,
DBIx::Class::Storage::DBI::_dbh_execute(): Incorrect date value: '0' for
column 'onloan' at row 1 at /home/vagrant/kohaclone/t/lib/TestBuilder.pm
line 288
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Basically the idea is:
1. Undefined subroutine &C4::Items::ModZebra called at /home/vagrant/kohaclone/C4/Items.pm line 302.
=> Then use C4::Items before C4::Biblio
2. Undefined subroutine &C4::Circulation::GetItem called at /home/vagrant/kohaclone/C4/Circulation.pm line 1290
=> Then use C4::Circulation before C4::Items
And sometimes these 2 rules do not work...
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] For consistency going back to IsItemOnHoldAndFound in this sub.
This call is used in the on_shelf_holds == 2 case too.
The routine will be refactored quite soon.
Adding the else branch for on_shelf_holds == 0 for more clarity.
[2] Removing the test for found==F in reserves. In Koha F is only used
when the hold is filled and moved to oldreserves.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
- Checkout an item
- Place hold on this item,
- Return the item
- Make sure the hold is waiting (found W) and AllowOnShelfHolds is
not to 'Allow'
- Check that the button "Place hold" appears in opac detail page of
the biblio
- do the samewith items/reserves in transit
Changes on C4::Reserves::IsAvailableForItemLevelRequest
Make sure this tests pass:
- t/db_dependent/Reserves.t
- t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
Rebased - 2017-12-12 - Alex Arnaud
Bug 4319 - [QA fix] Create Koha::Biblio->hasItemswaitingOrInTransit
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Tests had some confusion with names and results, though they do seem to
cover the changes here.
I believe the tests highlight that ReserveControlBranch has no effect,
and possibly it should? Beyond the scope here but left those tests
for future work to be done
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch originates from a QA Follow-up on bug 19260.
The first 19260 patch adds CancelExpiredReserves tests to Reserves.t.
But note that we already have some tests in Holds/CancelReserves.t.
This patch does:
Renames Holds/CancelReserves.t to Reserves/CancelExpiredReserves.t.
Rearranges modules there.
Moves its existing tests into a first subtest.
Moves the new subtest from Reserves.t to CancelExpiredReserves.t.
Replaces $dbh->do('DELETE FROM reserves').
Adds some TestBuilder statements for missing data (by the move): adding
biblio, item, borrower (removing slow AddMember call).
Test plan:
Run Reserves.t and Reserves/CancelExpiredReserves.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Removing dbh from one script, changing rollback in the other.
Schema is leading now.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Remove expiration date calculation in C4::Letter since it's done
when setting the reserve waiting,
- remove expiration date calculation in circ/waitingreserves.pl. Use
the one in DB,
- add a new atomic update that calculate expiration date for
waiting reserves,
- add tests for days_foward function and fix the infinite loop.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes koha automatically set expiration date when reserves become
waitting. Also it adds a new syspref "ExcludeHolidaysFromMaxPickUpDelay" that allows to
take holidays into account while calculating expiration date.
Test plan:
- Install this patch and run updatedatabase.pl script,
- allow ExpireReservesMaxPickUpDelay in system preferences,
- set ReservesMaxPickUpDelay to 5.
- Place an hold on a checked out item and check in this item:
The hold's expiration date should be today + 5.
- Allow ExcludeHolidaysFromMaxPickUpDelay in system preferences,
- add holiday during this pickup delay period,
- Create a new hold and make it comes waitting:
The hold's expiration date should be today + 5 + number of closed
day(s).
Also:
- Check that ExpireReservesOnHolidays syspref works again
without ExcludeHolidaysFromMaxPickUpDelay.
- Check that cancel fees apply again if wanted.
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We are going out of scope here, but these tests need a branch/item.
Test plan:
Run the adjusted tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
prove all these tests, they must all pass
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Two discussions on koha-devel lead to the same conclusion:
biblioitems.marcxml should be moved out this table
- biblio and biblioitems
http://lists.koha-community.org/pipermail/koha-devel/2013-April/039239.html
- biblioitems.marcxml & biblioitems.marc / HUGE performance issue !
http://lists.koha-community.org/pipermail/koha-devel/2016-July/042821.html
There are several goals to do it:
- Performance
As Paul Poulain wrote, a simple query like
SELECT publicationyear, count(publicationyear) FROM biblioitems GROUP BY publicationyear;
takes more than 10min on a DB with more than 1M bibliographic records
but only 3sec (!) on the same DB without the biblioitems.marcxml field
Note that priori to this patch set, the biblioitems.marcxml was not
retrieved systematically, but was, at least, in
C4::Acquisition::GetOrdersByBiblionumber and C4::Acquisition::GetOrders
- Flexibility
Storing the marcxml in a specific table would allow use to store several
kind of metadata (USMARC, MARCXML, MIJ, etc.) and different formats (marcflavour)
- Clean code
It would be a first step toward Koha::MetadataRecord for bibliographic
records (not done in this patch set).
Test plan:
- Update the DBIC Schema
- Add / Edit / Delete / Import / Export bibliographic records
- Add items
- Reindex records using ES
- Confirm that the following scripts still work:
* misc/cronjobs/delete_records_via_leader.pl
* misc/migration_tools/build_oai_sets.pl
- Look at the reading history at the OPAC (opac-readingrecord.pl)
- At the OPAC, click on a tag, you must see the result
Note: Changes in Koha/OAI/Server/ListRecords.pm is planned on bug 15108.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Holds/RevertWaitingStatus.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Holds/RevertWaitingStatus.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Holds/RevertWaitingStatus.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to prevent patrons from placing holds on
items where there are other items available for the patron to
check out.
Test Plan:
1) Apply this patch
2) Browse to the circulation rules
3) Note the new option for "On shelf holds allowed"
4) Set the rule to "If all unavailable", set "item level holds" to allow
5) Find a patron/branch/itemtype applicable to this rule
6) Ensure at least one item on the record is available for the
patron to check out
7) Attempt to place a hold for the item
8) Note you cannot place the hold
9) Check the available item out to another patron
10) Note you can now place a hold for the first patron
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Works as intended!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tests assume that the branchcodes CPL/MPL/etc. already exist in the DB.
If they need them, they should create them.
Test plan:
Execute the differente test files on a DB without any branchcode or
at least without CPL/MPL branches.
Confirm that the tests pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- use Modern::Perl;
- fix a typo
- remove an old comment
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This feature will allow libraries to specify that, when an item is returned,
a local hold may be given priority for fulfillment even though it is
of lower priority in the list of unfilled holds.
This feature has three settings:
* LocalHoldsPriority, which enables the feature
* LocalHoldsPriorityPatronControl, which selects for either tha patron's
home library, or the patron's pickup library for the hold
* LocalHoldsPriorityItemControl, which selects for either the item's
holding library, or home library.
So, this feature can "give priority for filling holds to
patrons whose (home library|pickup library) matches the item's
(home library|holding library)"
Test Plan:
1) Apply this patch
2) Run t/db_dependent/Holds/LocalHoldsPriority.t
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without this patch, the following warning appears:
t/db_dependent/Holds/RevertWaitingStatus.t .. Subroutine
C4::Context::userenv redefined at
t/db_dependent/Holds/RevertWaitingStatus.t line 25.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Test record has 1 single item, checked out to patron X
2) Place 3 holds for patrons A, B and C, all title level hold this time
A, B, C, item branches and staff branch are the same.
3) Return item, confirm hold
4) Confirm item is now waiting for patron A
Priorities are: A = Waiting, B = 1, C = 2
5) Open patron account of user B, checkout book
Koha asks: Item X has been waiting for patron A... Revert
waiting status
Confirm.
6) Check priorities:
Hold list shows: A = 1, C = 1
Database says: A = 1, C = 3
7) Apply this patch
8) Repeat steps 1-6
9) Note the priorities are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan correctly predicts the error and the correction made by the
patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
