- Fixes typo "Recieve" in the sample notices
- Adds new notices to it-IT installer
- Turns off feature for existing installations, leaves it
on for new installations
- Fixes typo "cancelation"
- Fixes ids in <body> of new pages
- Adds/fixes classes in th elements of tables
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch fixes some smaller problems:
- Adds new notices to the it-IT installer (xt/sample_notices.t)
- Renames one of the classes used in the table to avoid double up
- Fixes POD of Bilbio.pm by removing a doubled up line
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Article Requests are somewhat similar to holds, but are not requests for
an item to check out. Instead, article requests are requests for a
photocopy of a particular section of a book ( most often ). This is very
common in academic libraries where researchers may request a copy of a
single article found in a journal.
This patch set adds the ability to place article requests in Koha. It
allows the control of what can be requested via the circulation rules.
Since article requests of electronic resources are not outside the realm
of possibility, the feature will check not only the items for
requstability, but the record itself as well ( i.e. both items.itype and
biblio.itemtype ).
Article requests can be placed for patrons from the opac and staff
intranet and can be viewed in most areas where holds are viewed ( e.g.
patron details, record details, etc ).
There is a script to view article requests in progress within the
circulation module. Article requests can be Open ( i.e. new ), In
Processing, Completed, or Canceled. The status of a given request can be
updated from this script.
Test Plan:
1) Apply the patch set
2) Run updatedatabase.pl
3) Enable the system preference ArticleRequests
4) Set up some required fields in:
ArticleRequestsMandatoryFields
ArticleRequestsMandatoryFieldsItemsOnly
ArticleRequestsMandatoryFieldsRecordOnly
5) Edit your circ rules, set article requests to 'yes' for something
6) Test the ability to add an article request from the opac ( required fields enforced )
7) Test the ability to add an article request from the staff interface ( required fields no enforced )
8) Note you can choose item level or record level requests
9) Change the rule to "record only"
10) Repeat 6 and 7
11) Note you cannot choose items
12) Change the rule to "item only"
13) Repeat 6 and 7
14) Note you must choose an item
15) Note that the 'new request' message is queued for each new request
16) Browse to /cgi-bin/koha/circ/article-requests.pl
17) Note requests are split by pickup branch
18) Test slip printing via the "Print slip" action
19) Process request vai "Process request" action
20) Note an email notice is queued for patron
21) Refresh /cgi-bin/koha/circ/article-requests.pl
22) Note request has moved to "processing" tab.
23) Complete request with "Complete request" action
24) Note message is queued for patron
25) Cancel a request, add cancelation note.
26) Note message is queued for patron
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New module to handle management of circulation to Housebound readers.
- Ability to create housebound profiles & scheduled visits for patrons.
- Ability to record users as Deliverers or Choosers (or both), using
extended patron attributes.
- Ability to link choosers and deliverers to individual delivery runs.
- 'Delivery Frequencies' are customizable through authorised
values ('HSBND_FREQ').
* koha-tmpl/intranet-tmpl/prog/en/includes/circ-menu.inc: add
Housebound menu if appropriate.
* Koha/Patron.pm (housebound_profile): New method.
* Koha/Patrons.pm (housebound_choosers, housebound_deliverers): New
methods.
* Koha/Patron/HouseboundProfile.pm: New File.
* Koha/Patron/HouseboundProfiles.pm: New File.
* Koha/Patron/HouseboundVisits.pm: New File.
* Koha/Patron/HouseboundVisit.pm: New File.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: New file.
* members/housebound.pl: New file.
* installer/data/mysql/kohastructure.sql: Add housebound_* tables.
* installer/data/mysql/sysprefs.sql: Add HouseboundModule syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/circulation.pref:
Add HouseboundModule syspref.
* installer/data/mysql/atomicupdate/housebound_tables.sql: New file.
* t/db_dependent/Patron/Borrower_Housebound.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: New file.
Test plan:
- Apply patch.
- Run atomic update script.
- Run Unit Tests (t/db_dependent/Patron/Housebound*)
- Optionally, add additional authorised values to 'HSBND_FREQ'.
- Switch on 'HouseboundModule' syspref.
- Ensure 'ExtendedPatronAttributes syspref is on.
- On patron pages, when editing, add some to the Housebound deliverer
and chooser groups.
- On a patron page, the Housebound menu should now be present.
- create housebound profile
+ ensure Frequency values seem pulled from 'HSBND_FREQ'.
- create 'housebound visits' (deliveries)
+ ensure chooser/deliverer lists are populated with patrons that
have the Chooser or Deliverer Attribute type.
- edit visits.
- delete visits.
- Switch off 'HouseboundModule'
- the Housebound menu should disappear
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [Followup] Rename test files.
* t/db_dependent/Patron/Borrower_Housebound.t: Rename to
t/db_dependent/Patron/Housebound.t.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: Rename to
t/db_dependent/Patron/HouseboundProfiles.t.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: Rename to
t/db_dependent/Patron/HouseboundVisits.t.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [QA Followup] Fix category_type ref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Replace
references to `category_type` with `categorycode`.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a new syspref AllowItemsOnHoldCheckoutSCO, so the current
AllowItemsOnHoldCheckout syspref can be decoupled for the SCO module, giving
the library more flexibility.
During upgrade, it gets its value from the original AllowItemsOnHoldCheckout syspref.
Sponsored-by: NEKLS
Signed-off-by: George <george@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This way it will get used for any languages.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Found in
installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch set adds a new table authorised_value_categories to store
authori(s|z)ed value categories into a separate table.
The problematic is explained on bug 15799 comment 4:
We need FK to the AV categories but some may not have authorized values
yet.
What does this patch set:
- Add a new authorised_value_categories table
- Populate it with known categories
- Update FK items_search_fields.authorised_values_category
- Create a new FK marc_subfield_structure.authorised_value (FIXME should
be authorised_value_categories instead)
They are some problems this patch set do not take into account:
- The .sql installer files won't insert correctly (will have to be
updated when this patch set will be ready to be pushed)
- All the categories (even the ones without authorized values defined)
are listed when you edit frameworks (marc_subfield_structure.pl)
- There is no way to delete a category (TODO). But to do so it would be
good to have a authorised_value_categories.is_internal field to mark
some categories as "cannot be deleted".
Test plan:
0/ Execute the DB entry to create and populate the new table and set the FK
1/ Create a new AV category from the admin module (admin/authorised_values.pl)
2/ Add/edit subfield linked to a AV category
(admin/marc_subfield_structure.pl)
3/ You won't be allowed to add AV for branches, itemtypes or cn_source.
They are used internally.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some installer files still use WTHDRAWN instead of WITHDRAWN as an AV
category.
Test plan:
git grep WTHDRAWN installer
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some installer files use COU and LAN instead of COUNTRY and LANG.
To uniformise these AVs, it would be good to use the same code.
Note that I do not think we should update existing installations
Carefully compared code.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
What we currently have:
Koha/ElasticSearch.pm
Koha/ElasticSearch/Indexer.pm
Koha/SearchEngine/Elasticsearch/QueryBuilder.pm
Koha/SearchEngine/Elasticsearch/Search.pm
What we want:
Koha/SearchEngine/Elasticsearch.pm
Koha/SearchEngine/Elasticsearch/Indexer.pm
Koha/SearchEngine/Elasticsearch/QueryBuilder.pm
Koha/SearchEngine/Elasticsearch/Search.pm
Test plan:
% git grep -i Koha::ElasticSearch
% git grep ElasticSearch|grep -v Catmandu::Store::ElasticSearch
should not return any result
Do a full reindex and search for records
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The yaml file is not used to populate ES mapping tables (search_field,
search_marc_map and search_marc_to_field) when doing a fresh install.
We need to insert them, otherwise ES will be unusable.
Test plan:
Create a new install and confirm that the ES tables (search_field,
search_marc_map and search_marc_to_field) are correctly populated.
Bonus points: Use an older DB (prior to 3.23.00.050), execute the
updatedatabase.pl script and confirm that the ES table are correctly
populated
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
remove a 'my'
next if not defined subscriptions.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
A recent change in the 'subscription' table structure highlighted a
problem in a DBRev upgrade (3.23.00.006). As it adds a new column, when
upgrading from (say) 3.20.00.000 the code/schema (correctly) expects the
subscription.itemtype column to exist. But it is not created until DBRev
16.06.00.025.
To reproduce:
- Have a clean 3.20.00 DB loaded into kohadevbox
- Checkout current master
- Run:
$ perl installer/data/mysql/updatedatabase.pl
=> FAIL: The upgrade procedure fails due to missing colum.
The solution: rewrite the updatedatabase.pl entry using plain DBI
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
In a database update we alter the letter table, making a column
(branchcode) not be able to contain NULL values.
However if it already does, this SQL fails. So before changing the
column we change the NULL values
[Tue Sep 20 19:08:10 2016] updatedatabase.pl: DBD::mysql::db do failed:
Invalid use of NULL value [for Statement "
[Tue Sep 20 19:08:10 2016] updatedatabase.pl: ALTER TABLE letter MODIFY
COLUMN branchcode varchar(10) NOT NULL DEFAULT ''
[Tue Sep 20 19:08:10 2016] updatedatabase.pl: "] at
/home/mtompset/kohaclone/installer/data/mysql/updatedatabase.pl line
12638.
Reproduce:
on an ubuntu 16.04 LTS machine with MySQL 5.7 install git koha
development environment.
...
git checkout -b my_3.18.x origin/3.18.x
drop database koha_library;
create database koha_library;
quit;
web install all sample data
(ignore some issues with sample data, and one with mandatory)
git checkout -b bug_17234 origin/master
git bz apply 17292
git bz apply 17320
git bz apply 17260
git bz apply 17234
web install
Two warning messages are expected output from upgrade process, but
the above message is not.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not follow the test plan, but the changes make sense
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This fixes a tiny typo in sysprefs.sql that kept all
systempreferences from being installed.
To test:
- Create a new koha database, run the web installer
- Verify that all systempreferences have been loaded
select count(*) from systempreferences should be
no less than 553
or
- Truncate your systempreferences table
- Verify that the repaired sysprefs.sql file loads
without error
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This new enhancement will add the ability to change the default holdings
sort on OPAC displays to be by library, instead of item type.
This patch adds a new pref OPACHoldingsDefaultSortField with 3 different
possible values:
- Item type
- Home library
- Holding library
Note that if OpacLocationBranchToDisplay is set not to display home libraries,
unexpected behaviors might happen if OPACHoldingsDefaultSortField is set to
"Home library", same for "Holding library".
Test plan:
- Confirm that the default value for OPACHoldingsDefaultSortField is
'first column' after executing the DB entry and that there is no
change in the behavior (first column is used to sort the holdings
table on the detail page).
- Set OpacLocationBranchToDisplay to both and play with the different
values of OPACHoldingsDefaultSortField
=> Confrm that the default column used to sort the table is correctly
changed
- Set the pref SeparateHoldings on
=> Confirm that both tables (Holdings and other holdings) are sorted using
the OPACHoldingsDefaultSortField value.
Sponsored-by: University of the Arts London
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See http://hea.koha-community.org/, the countries are filled is wrong
values.
If we decide to update the free text with a dropdown list, we need to
handle these wrong data.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This will avoid syntax problems with Hea when a user will fill this 2 sysprefs
The default choice for UsageStatsLibraryType and UsageStatsCountry is 'empty'
Test Plan
---------
1. Create a new Koha install
2. Go to the 'Administration' page
3. Go to 'Global system preferences'
4. Go to 'Administration'
5. At the end of this page you should see a dropdown menu for
- UsageStatsCountry with all countries
- UsageStatsLibraryType with all type of library
They both should be empty by default.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Not a complete list but is a start
Lots of new strings to translate :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We should at least report some grand totals when fixing fine records.
This patch also includes some cosmetic whitespace swapping.
Turned one last into an if statement.
Added a copyright statement too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The location of the script in misc/maintenance would be fine for
running it from the command line. But it will be a problem for several
install types when running it from the web installer.
Files from misc/maintenance go to bin/maintenance in a package install,
not to mention other installs than a dev install.
This patch moves the script to installer/data/mysql. Already there are two
other scripts run by upgradedatabase. I would rather move these three
scripts somewhere else, but we c/should do that on another report.
Fixed a small typo in a message too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(plus warnings for 16.05+ production setups possibly already affected)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch only fixes encoding of file
installer/data/mysql/it-IT/necessari/sample_numberpatterns.sql
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to de-DE files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to it-IT files
Checked marc21 and unimarc files
unimarc_relatorterms.sql had bad encoding, others minor
errors
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mostly fixes bad values in auth files ( '' -> 0 )
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to pl-PL files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to nb-NO files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to es-ES files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Needs Bug 13669
This patch fix web installer for
de-DE, es-ES, fr-CA, nb-NO and pl-PL
To test:
1) Apply patch
2) Try web installer for any/all listed languages.
a) de-DE, es-ES, fr-CA and pl-PL
There must be no problems for marc21 + all sample files
b) nb-NO
There must be no problems for normarc + all sample files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Needs Bug 13669
Rewrite autorites_norme_unimarc.sql to
use only one INSERT IGNORE.
New load method complains about duplicate keys,
and both auth files are mandatory!
Also removed blank space from sample_labels.sql
Tested with unimarc_complet and all sample files.
To test
1) Apply the patch
2) Try fr-FR web installer, unimarc_complet + all sample files
There must be no errors
Don't know if fr-FR marc21 and unimarc_lecture_pub are used,
need a look from french users.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
