Commit graph

147 commits

Author SHA1 Message Date
cc595325d6
Bug 19735: Add support for max_ver
This patchset adds support for extracting 'max_ver' from the cpanfile so
we can use version ranges properly and report errors if we have modules
installed that do not fit within that version range.

Test plan:
1) Manually modify the module version of a required module in the cpanfile
   to have a max version greater than the version you have installed.
2) Run through the install proceedure and note the new warning that a
   module needs upgrade for the module in question.
3) The module should also be reported in the about page

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2020-02-12 16:33:02 +00:00
Julian Maurice
a34d086a24
Bug 19735: Move Perl deps definitions into a cpanfile
cpanfile is a format for describing CPAN dependencies for Perl
applications.
It is more concise - thus easier to read and maintain - than
C4::Installer::PerlDependencies, and allows to describe requirements
more accurately (using version ranges or features for instance)
Additionally it can be read by tools such as cpanm or carton for an
easy way to install dependencies on non-Debian-based systems.

For more information on cpanfile, see
http://search.cpan.org/~miyagawa/Module-CPANfile-1.1002/lib/cpanfile.pod

This patch replace C4::Installer::PerlDependencies by an equivalent
cpanfile and update all scripts/modules that were using PerlDependencies
It also removes dead code from C4::Installer::PerlModules (some
subroutines were not used at all, except in unit tests)

Added dependencies:
 - Module::CPANfile
 - CPAN::Meta (dependency of Module::CPANfile, but we need a more recent
   version than the one Module::CPANfile requires)

Test plan:
  1. Go to About page, tab Perl modules and keep this browser tab open
  2. Apply patch
  3. Install Module::CPANfile and CPAN::Meta
    a. On Debian-based systems:
       # will install libcpan-meta-perl as a dependency
       sudo apt install libmodule-cpanfile-perl
    b. Others:
       # will install CPAN::Meta as a dependency
       sudo cpanm Module::CPANfile
  4. In a new browser tab, go to About page, tab Perl modules and compare
     the table with the one in the previous browser tab
     They should be identical, except for newly added dependencies
     (Module::CPANfile and CPAN::Meta)
  5. Do a 'standard' install
    a. perl Makefile.PL (select 'standard')
    b. make
    c. sudo make install
    d. Configure your database, web server, ... and go through the web
       install process
  6. Verify that the cpanfile got copied into PERL_MODULE_DIR (which
     should be /usr/share/koha/lib)
  7. Go to the about page of this fresh install and compare it with your
     dev install
  8. Verify that debian/list-deps still works
     This takes a lot of time and it may not be necessary to wait until
     the end. If you see some Debian package names that correspond to
     modules in cpanfile, it means it still works
     (you need apt-file for this script to work)
  9. Verify that koha_perl_deps.pl still works
 10. prove t/Installer_pm.t t/Installer_PerlModules.t

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2020-02-12 16:33:02 +00:00
4ec3fe042d
Bug 18936: Fix warning about page about wrong lengthunit
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2020-02-04 09:56:27 +00:00
3c2e40c224
Bug 24327: Add warning to the about page is AnonSugggestions but AnonymousPatron
This patch adds a warning to the about page if AnonSuggestions is set
but AnonymousPatron.

Test plan:
Turn on AnonSuggestions and set AnonymousPatron to 0
=> You see a warning on the about page
Turn on AnonSuggestions and set AnonymousPatron to an invalid value
=> You see a warning on the about page
Turn off AnonSuggestions
=> No warning
Turn on AnonSuggestions and set AnonymousPatron to a valid value
=> No warning

Signed-off-by: hc <hc@interleaf.ie>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2020-01-08 14:13:28 +00:00
96f3ae0285
Bug 24215: Do not always display an empty entry
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2019-12-18 16:06:16 +00:00
50446f777b
Bug 24215: Correct display of guarantor relationship errors
Test plan:
1) Add some bad data to your borrower_relationships table. ( add or
   update a relationship such that the 'relationship' field contains a
   value not listed in the corresponding system preference.
2) Go to the about system information page and note the nasty display of
   ARRAY(whatever)
3) Apply the patch
4) Repeat step 2 and note that a list of bad values is now displayed
   instead.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2019-12-18 16:06:06 +00:00
8387d6a2d2
Bug 23655: Restore debian Jessie support
Bug 14570 inadveratntly introduced the use of selectall_array; A feature
that was introduced to DBI version 1.635 which is not available in
debian jessie at the time of writing.

This patch replaces the call with selectall_arrayref which is supported
and works with the rest of the existing code.

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2019-10-26 12:07:49 +01:00
77d197c361
Bug 14570: Add about.pl entry for wrong relationship data
This patch adds a check and an entry to the about.pl, for bad
relationship data. The checks are:

- 'relationship' containing '_bad_data' (generated by the atomicupdate
  on undef relationships.
- 'relationship' values that are not in the borrowerRelationship
syspref.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2019-08-20 16:06:36 +01:00
1aae63606c
Bug 23445: (RM follow-up) Add warning for unexpected lengthunit
Discussions on this bug highlighted worries about behind the scenes
fallbacks to 'days' as a lengthunit should the lengthunit be set to an
unrecognised value. This patch adds a warning to the about page for any
such occurrences so librarians may be made aware of and resolve the issue.

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2019-08-16 12:19:34 +01:00
ec08e5af12 Bug 21626: (QA follow-up) Don't crash on missing teams file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-05-17 14:46:10 +00:00
06ccce11c1 Bug 21626: Add release dates to team
Signed-off-by: Owen Leonard <oleonard@myacpl.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-05-17 14:46:10 +00:00
5578771047 Bug 21626: (follow-up) Performance Improvement
Signed-off-by: Owen Leonard <oleonard@myacpl.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-05-17 14:46:10 +00:00
c07aaf8aca Bug 21626: Use teams.yaml for teams section
Signed-off-by: Owen Leonard <oleonard@myacpl.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-05-17 14:46:09 +00:00
d4b503aa14 Bug 22893: Do not crash if contributors.yaml does not exist
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-05-14 18:16:37 +00:00
73fd7e9698 Bug 21662: (follow-up) Drop YAML::XS, use YAML
I mistakenly left us using YAML::XS when we don't already depend upon
it. YAML is a sufficent alternative that we do already require.

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-05-10 17:19:43 +00:00
594f7d64d0 Bug 21662: Use contributors.yaml for contributors list
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-05-10 17:19:43 +00:00
7d4126e278 Bug 21502: Add ItemsDeniedRenewal system preference to check syntax
Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-04-29 12:44:07 +00:00
81a614a0f5 Bug 21502: Add UpdateItemLocationOnCheckin preference to YAML format check
Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-04-29 12:44:07 +00:00
40f6822dc1 Bug 21502: Add check for YAML formatted system preferences to about page
So far there are these yaml formatted preferences:
    UpdateNotForLoanStatusOnCheckin
    OpacHiddenItems
    BibtexExportAdditionalFields
    RisExportAdditionalFields
    UpdateItemWhenLostFromHoldList
    MarcFieldsToOrder
    MarcItemFieldsToOrder

Test plan:
1) Add some badly formatted YAML into some of preferences listed above
2) Check the System information tab on About page for appropriate warnings

Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-04-29 12:44:07 +00:00
Andrew Isherwood
1c8952a36b Bug 20996: Remove prefix use of borrower category
This patch removes the potential use of borrower category as a ILL
request ID prefix. It makes no sense. We provide the ability for a site
to define a request prefix based on branch, there is no use case for
using the borrower category. Add to this that the borrower for every
request was being retrieved in order to get the category, it's a huge
performance hit also.

We also now require the <branch> block in the <interlibrary_loans> block
and complain if it's not present. The request prefix should be defined
in this block.

This patch also improves the performance of the API request that returns all
requests, optionally including additional data.

It also deprecates the overloaded TO_JSON method and moves the request
augmentation code into the API route's controller. It may be that we
want to shift it out of there at some point, but it is fine where it is
for now.

Signed-off-by: Magnus Enger <magnus@libriotech.no>

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2018-11-02 10:33:02 +00:00
bee097b39b Bug 14302: Remove GRS1 specific code
Remove:
- BIB_INDEX_MODE and AUTH_INDEX_MODE env var
- bib_index_mode and auth_index_mode options from scripts
- Warnings from about page, just kept one if zebra_bib_index_mode or
zebra_auth_index_mode still exist in config and are set to grs1

Test plan:
- Install Koha from src
- Install Koha from pkg
- Read the code, carefully!

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2018-08-31 11:24:20 +00:00
05812dbbba Bug 20727: (QA follow-up) Remove a few use statements again
We do no longer need "use Koha::UploadedFile" in a few places.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2018-06-22 16:10:10 +00:00
Kyle M Hall
3ff7c27d98 Bug 20727: Move temporary_directory() to C4::Context
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2018-06-22 16:10:09 +00:00
71eba3a74a Bug 20428: Display warning if the entry is empty
And not only if the entry is missing. We should do the same for other
entries.
Also, use Koha::UploadedFile->temporary_directory to know the fallback
value.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-05-14 11:14:40 -03:00
a88e052ae5 Bug 20428: (QA follow-up) Remove redundant directory level
Upload creates its own upload folder in the temp folder, so there is no
need to add another level in temporary_directory.
Removing the creation of this folder in koha-create-dirs too.

Also removing the use Koha::UploadedFiles in about.pl. No longer needed.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-05-14 10:36:39 -03:00
fdb5d0ca1a Bug 20428: Make upload_tmp a more general tmp directory
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-05-14 10:36:39 -03:00
da2886132e Bug 20428: Make about.pl inform about missing upload_tmp_path entry
This patch makes about.pl warn about a missing upload_tmp_path entry in
koha-conf.xml. It also mentions the effectively used tmp dir.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-05-14 10:36:38 -03:00
fe7e0d1e52 Bug 20734: Add warning to the about page if RESTOAuth2ClientCredentials and not Net::OAuth2::AuthorizationServer
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-05-09 12:56:03 -03:00
9a3d12e35e Bug 18674: (QA follow-up) Add date and time
This patch adds current date and time, formatted as configured.
It makes the timezone name be displayed the system uses it (important
for the 'local' use case).

It removes some warnings too.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-04-11 16:45:08 -03:00
b068259521 Bug 18674: TZ error handling
This patch adds C4::Context->timezone bad timezone handling.
The calculated 'effective' timezone is tested with the right tool and a
fallback to 'local' is added. A warning is printed in the logs.

A test for this is added to about.pl too, along with the right warning
messages in case of problems.

Tests are added for both invalid TZ and to make sure the warning is
raised.

To test:
- Apply the patch
- Run:
  $ kshell
 k$ prove t/timezones.t
=> SUCCESS: All tests pass

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-04-11 16:45:08 -03:00
Mark Tompsett
e8ac2d3833 Bug 18674: Added timezone information to about page
Before patch: No timezone section
After patch: timezone section at bottom of
             Server information tab.

Actual is what is being used. Config overrides environment variables.
So if there is confusion why the environment variables aren't working,
it will be visible why.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-04-11 15:05:02 -03:00
d6e8e88249 Bug 15492: Make existing code aware of new self_check* permissions
This patch makes the existing code for SCO use the new permissions schema
for self check modules. Specifically addresses this change:

  circulate  => self_checkout
becomes
  slef_check => self_checkout_module

about.pl checks are dejusted too.

get_template_and_user gets refactored to avoid code duplication and the
conditions are adjusted for the new permissions.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-03-26 17:31:18 -03:00
22d708894b Bug 19542: (QA follow-up) Remove debug warn
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-12-11 14:30:42 -03:00
a0e44e1920 Bug 19542: Add Elasticsearch information in the 'About' page
This patch adds Elasticsearch related information to the 'About' page.

The information is gathered and displayed only when the 'SearchEngine' syspref
is set to 'Elasticsearch'. It displays configured nodes, and the status:
- Running
- Not running

In case it is running, it displays the defined indices and the document count on each.
If there are configuration problems, exceptions are catch and a convenient warning
message is displayed.

To test:
- Apply this patches
- Run:
  $ kshell
 k$ prove t/Koha/SearchEngine/Elasticsearch.t
=> SUCCESS: Tests pass!
- Have ES configured in your koha-conf.xml file (by default in kohadevbox)
- Set the 'SearchEngine' syspref to 'Elasticsearch'
- Comment out pieces of the elasticsearch-specific entries (server, index_name,
  the whole elasticsearch block). Reload on each change.
=> SUCCESS: Warning messages are displayed and make sense in the context of your changes.
----> the rest of the tests require having ES running on the dev env. This can be easily
      achieved by creating the kohadevbox using:
        $ KOHA_ELASTICSEARCH=1 vagrant up
- Stop the 'elasticsearch' service:
  $ sudo service elasticsearch stop
- Reload about.pl
=> SUCCESS: The configured nodes are displayed, and the status is 'not running'
- Start the 'elasticsearch' service:
  $ sudo service elasticsearch start
- Reload about.pl
=> SUCCESS: The configured nodes are displayed, the status is 'running' and
            created indices info is displayed, along with the document count
            on each index.
- Sign off :-D

Signed-off-by: David Bourgault <david.bourgault@inlibro.com>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-12-11 14:30:42 -03:00
4b79948400 Bug 7317: Add partner_code checks to abot page
This patch adds checks to the configured (or fallback) partner_code.
It produces two different warnings:

- Configured partner_code doesn't match an existing patron category
code.
- partner_code is not defined, a fallback to ILLLIBS is done

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-11-09 11:42:14 -03:00
06f9e5fe3a Bug 7317: Handle backend absense more gracefuly
5/ This patch makes Koha::Illrequest->load_backend raise an exception
if the passed backend is invalid. This way we will catch more errors introduced.

The patch also disables the 'New Ill request' when no backends are available. Gets
rid of a related warnings.

Both OPAC and Intranet now display a warning message when no backends
are available.

Tests are added for the load_backend changes.

4/ This patch fixes the path for the checkboxes jquery plugin, and removes the include
for tablesorter, as this implementation uses Datatables. This is obviously code for older
Koha, ported to master.

TODO: There's something wrong on the styling. My idea is to get rid
of the custom column visualization tool, and have it display as regular
DataTables. We can then introduce the use of colvis on a separate bug
report.

Note: POD coverage for the exceptions file is wrongly tested. It is a false positive.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-11-09 11:42:14 -03:00
844dc871ff Bug 7143: Make about.pl knows about the new epoch column
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-11-01 13:10:16 -03:00
Katrin Fischer
c3dca8c24b Bug 18931 - Follow up - Typo fix in SQL statement
Fixes the table alias in the SQL statement for items and
adds items to the if clause for showing data problems.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-07-26 13:50:56 -03:00
193ecb0a2b Bug 18931: Add items/deleteditems tables
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-07-26 13:50:56 -03:00
1d1d6ddc9d Bug 18931: Add a "data corrupted" section on the about page - MySQL AI
See the following wiki page for more information
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix

Test plan:
Create (at least) a patron, a checkout, a biblio and a hold
Then fill the old_* or deleted* tables with:
 INSERT INTO deletedborrowers SELECT * from borrowers WHERE  borrowernumber=XXX;
 INSERT INTO deletedbiblio SELECT * from biblio WHERE biblionumber=XXX;
 INSERT INTO old_issues SELECT * from issues WHERE issue_id=XXX;
 INSERT INTO old_reserves SELECT * from reserves WHERE reserve_id=XXX;

Go to the about page, 'System information' tab. You should see a new
"Data problems" section with the list of the ids that are wrong

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-07-26 13:50:55 -03:00
2b9662e0ca Bug 17990: Refactor Perl module versions check
The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.

Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab

You should not see any differences from before and after this patch

Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2017-02-17 12:13:44 +00:00
7d140258a0 Bug 7533: Add a warning to the about page if template_cache_dir is not set
We need to tell the administrators that it would be great for them to
set this config entry.

Test plan:
- Do not set template_cache_dir and confirm that you see the warning
- Set template_cache_dir and confirm that you do not see the warning

Signed-off-by: Magnus Enger <magnus@libriotech.no>
Both templates for koha-conf.xml are updated. After applying the
patach a warning was correctly displayed. After adding
template_cache_dir to koha-conf.xml and restarting memcached it
went away.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2017-01-20 14:13:53 +00:00
b3f9232b6a Bug 17274: Display the place where the memcached is picked
The memcached config can be read from ENV or koha-conf.xml
In order to remove any ambiguity, let's inform the user which config is
used.

Test plan:
1/ Define the memcached config in ENV and $KOHA_CONF
=> Go on about page, you should get a warning
2/ Define the memcached config in ENV and not in $KOHA_CONF
=> Go on about page, you should get a warning
3/ Do not defined the memcached config in ENV or $KOHA_CONF
=> Go on about page, you should get a warning
4/ Define the memcached config in $KOHA_CONF and not in ENV
=> Go on about page, you should not get a warning, this is the expected
config

Followed test plan, works as expected.
Signed-off-by: Marc <veron@veron.ch>

Signed-off-by: Katrin Fischer  <katrin.fischer@bsz-bw.de>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2016-11-02 10:55:54 +00:00
6197e5020d Bug 17261: Memcached may not longer be running
If plack is started with memcached, memcached will be considered as
running, even if it has been stopped (or crashed).
This case should be highlighted on the about page.
Note that I am not sure about the consequences of this specific case!

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Katrin Fischer  <katrin.fischer@bsz-bw.de>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2016-11-02 10:55:25 +00:00
605abeb08a Bug 17261: The default memcached namespace is "koha"
If no namespace is defined in ENV or the config, "koha" is used as the
default memcached namespace (See Koha::Cache->new)

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Katrin Fischer  <katrin.fischer@bsz-bw.de>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2016-11-02 10:55:24 +00:00
0dfefe73f5 Bug 17261: (followup) Rebase against 17189 and 11921
This patch adjusts the original one so it works on top of 17189
and 11921. It adds an 'Effective caching method' text which can
be useful, when memcached is not available.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Katrin Fischer  <katrin.fischer@bsz-bw.de>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2016-11-02 10:55:24 +00:00
eedbb1b7ea Bug 17261: Add memcached configuration info to about.pl
This patch adds a row in the About > System information tab, showing
the current configuration for memcached.

To test:
- Apply this patch, have memcached configured for the current instance (this is the
  default in kohadevbox)
- Make sure you have the memcached server running:
  $ sudo service memcached start
- Open the about page in the browser
=> SUCCESS: You get something like:
  Memcached:    Servers: 127.0.0.1:11211 | Namespace: koha_kohadev | Status: running
- Stop the memcached server:
  $ sudo service memcached stop
- Reload the about page
=> SUCCESS: You get something like
  Memcached:    Servers: 127.0.0.1:11211 | Namespace: koha_kohadev | Status: not running
- Set both MEMCACHED_* variables in the apache config for intranet the empty string:
  $ sudo vim /etc/apache2/sites-enabled/kohadev.conf
..
   SetEnv MEMCACHED_SERVERS ""
    #"127.0.0.1:11211"
   SetEnv MEMCACHED_NAMESPACE ""
    #"koha_kohadev"
..
- Restart apache:
  $ sudo service apache2 restart
- Reload the about page
=> SUCCESS: You get something like:
  Memcached:  Servers: undefined| Namespace: undefined | Status: unknown
- Sign off :-D

Sponsored-by: ByWater Solutions

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Katrin Fischer  <katrin.fischer@bsz-bw.de>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2016-11-02 10:55:23 +00:00
eee1f59db3 Revert Bug 17177 - This bug was for 3.20.x only
This reverts commit b239aa988a.
2016-09-02 13:54:47 +00:00
Chris Cormack
b239aa988a Bug 17177 - about.pl references a module that doesn't exist
To test
1/ Go to the about page, notice error
2/ Apply patch
3/ Notice error gone

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2016-09-02 13:53:51 +00:00
Marc Véron
95f492b4d2 Bug 12721 - Syspref StatisticsFields: Warning on About page and text change in System preferences
This patch adds a warning to the about page if the syspref 'StatisticsFields' is misconfigured.
Additionally, the text on Home > Administration > SystemPreferences for 'Statistics Fields'
is changed.

To test:
- Apply patch
- Edit syspref 'StatisticsFields'. Verify that the explanation makes sense.
- Leave field empty
  => verify that no message appears on About page, tab System information
- Insert valid field names, e.g. location|itype
  => verify that no message appears on the About page
- Add trailing char
  => verify that the warning message appears on the About page
- Fill in some garbage or misspell a field name
  => verify that the warning message appears on the About page

Signed-off-by: Aleisha <aleishaamohia@hotmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
2016-04-29 02:48:30 +00:00