Script overdue_notices.pl creates a printed letter if borrower as no email.
Actually, unless --email option is used, first valid email of borrower is used. Email field should depend on AutoEmailPrimaryAddress syspref like in other letter creations.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Following test plan from Julien Sicot from Bugzilla:
- with patron's email address specified on "primary email"
field AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
field AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email"
field AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress" on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
- with patron's email address specified on "primary email" field
AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email" field
AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email" field
AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress"
on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" field AND syspref "AutoEmailPrimaryAddress"
on "alternate"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK"secondary email" field AND syspref "AutoEmailPrimaryAddress" on "alternate" => no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
"secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK
Note: Options for AutoEmailPrimaryAddress should be like the field names on
the patron form (primary, secondary...), but this is outside the scope of this
patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the inclusion of this patch, all searches will (try) to use
QueryParser for handling queries for both the bibliographic and authority
databases if UseQueryParser is enabled. If QueryParser is unavailable,
UseQueryParser is disabled, or the search uses CCL indexes, the old
search code will be used.
To test:
1) Apply patch.
2) Run the unit test with `prove t/QueryParser.t`
3) Enable the UseQueryParser syspref.
4) Try searches that should return results in the following places:
* OPAC (simple search)
* OPAC (advanced search)
* OPAC (authorities)
* Staff client (header search)
* Staff client (advanced search)
* Staff client (cataloging search)
* Staff client (authorities)
* Staff client (importing a batch using a match point)
* Staff client (searching for an item for adding to a label)
* Staff client (acquisitions)
* Staff client (searching for a record to create a serial)
* ANYWHERE ELSE I HAVE FORGOTTEN
5) Disable the UseQueryParser syspref. Repeat at least some of the
searches you did above.
6) If all searches worked, sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Searching still works as expected for variuos places.
QueryParser syspref seemed to be enabled by default
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
<dcook> Then bulkauthimport.pl?
<jcamins> bulkauthimport should not be used ever.
<eythian> it probably should be deleted
<jcamins> It should be.
Signed-off-by: David Cook <dcook@prosentient.com.au>
I've poked around in bulkmarcimport.pl and it certainly seems to have the functionality that Mason (and Jared and Robin) mention.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The -log option become optional if the -output_dir is given.
Test plan:
call the script with
1/ no one parameter : no log file
2/ -l : log file will be created in /tmp
3/ -o=/home/koha/var/log : log file with be created in the specified
4/ -o=/home/koha/var/log -l: Same as 3/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: All combination of options tested. Works well. No errors.
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
1/ Before the patch run misc/cronjobs/fines.pl
Notice that a file has been written to /tmp
2/ rm the file
3/ Apply the patch and run the script again
Notice the file is not created
4/ run the script with -l
Notice the file is created again
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Now it work as described. No errors.
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In order to reduce the number of concurrent downloads on the staff
client home page the images representing the various modules (circ,
patrons, etc) could be combined into one sprite.
This patch creates a new sprite containing all images and corrects the
CSS for the default and hover states of each link to match the previous
version. The separate images have been removed. Also added is a
GIMP-compatible Photoshop file from which the sprite is generated.
To test, apply the patch, clear your browser cache, and view the staff
client home page. Each module icon should look correct in its default
and hover states.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, Good idea! No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, no problems found.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To Test:
Set up a borrower to receive due and/or predue notices.
Define your predue and/or due notice to use <<items.content>>
Give your borrower an issue that will trigger a notice to be sent
(Example: Henry Acevedo has checked out a book that will be coming due tomorrow,
he wants to receive predue notices 1 day in advance)
On the command line, run (your paths may vary, these are mine):
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl -c -n
Note that the date listed is the due date, not the issue date.
Then run:
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl -c -n --itemscontent=issuedate,title,author,barcode
Note that the date listed is the issue date, not the date due.
Also run
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl --help
Should show the help.
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl --man
Should show the man page version of the help.
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl
Should show the help. This script requires confirmation before running (-c or nothing is done).
Note that the documentation refers to the --itemscontent= option and now allows --man as well as --help. Also it is a proper POD.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works as advertised according to the fine test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch cleans up some loose ends:
- Star ratings images are now in one sprite. Removing
separate star ratings images.
- Amazon ratings have been removed. Related image files
are removed by this patch.
- The tag images associated with tag links on the search
results page were not incorporated into the main sprite.
Now they are.
Added: The Photoshop file from which the main sprite was
generated, in case that is helpful to others. Each layer
is named, and comments have been added to the CSS
referencing the layer names. The file is GIMP-compatible.
Revisions:
- Rebased on current master
- Ported some changes to CCSR theme
- Removed unused CSS which referred to deleted images
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the -email option to overdue_notices.pl, which is repeatable
-email value can be:
- 'email'
- 'emailpro' or
- 'B_email'
- perltidy done
- in production for a BibLibre customer
- validated by the customer
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 40f9914e60.
Per Colin's report (confirmed by Mathieu and Julian):
"I've had some problems with this patch. With it applied I found
overdues for multiple users getting the same user's overdue message
text, eg user 1 gets their correct message but users 2, 3 and 4
get it as well. reverting the patch corrected this. I've not tracked
down the cause as yet."
fixes 2 warnings...
Use of uninitialized value in pattern match (m//) at /usr/share/koha/bin/cronjobs/overdue_notices.pl line 659.
Use of uninitialized value in pattern match (m//) at /usr/share/koha/bin/cronjobs/overdue_notices.pl line 670.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch use DataTable, see BUG|BZ 6836
- css/datatables.css
- lib/jquery/plugins/jquery.dataTables.min.js
- js/datatables.js
http://bugs.koha-community.org/show_bug.cgi?id=7167
Bug 7167 follow-up
Major changes:
* creating database tables for update on the fly, the 1st time the update script is called
* version is checked on mainpage.pl (and here only). If syspref Version differ from kohaversion.pl, the old updatedatabase is launched. If there are updates missing from new mechanism, the updatedatabase page is reached
* kohaversion check on each page is now useless in Auth.pm, removed dead code
* Updated installer: at the end of the process, retrieve all updates and automatically mark them "OK", as they're included in installer
Minor changes:
* adding copyright
* adding poddoc
* updating a warning, for better clarity
* switching from $$var to $var->
* small TT glitch fixed in updatedatabase.tt
* about.pl now returns the Version systempreference PLUS all the patches that have been applied
Bug 7167 follow-up perlcritic & numbers display & partial apply depending on DEBUG
* add use strict to updatedatabase, that is now perlcritic compliant
* partial apply of DB revs is now managed by DEBUG env variable = if DEBUG=0, the user can just apply every DBrev. If DEBUG=1, we're in a dev env, the user know has the option to apply DBrevs one by one
Display:
* in updatedatabase, small spelling changes
* in about.pl, remove 0 just after . (3.06.01 is displayed as 3.6.1)
* improve the display of applied numbers on about.pl
- before this patch, if you have N, N+1, N+2, N+3 and N+10 DB rev applied, about was displaying : , N+1 / N+2 / N+3 / N+10
- after this patch you have N......N+3 / N+10
* add ORDER BY into list_versions_already_knows to have number retrieved in the same order whatever the order they are applied
http://bugs.koha-community.org/show_bug.cgi?id=6679
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve the update.pl script
* Added CLI options to update.pl
* Call update.pl from the installer.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Now, we check versions on mainpage.pl and after login
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Reimplementing Marcel's suggestions & fixes
* Fixing the bugguy old version check (that was made against 3.0900000 instead of 3.0900027 -the last current kohaversion number
* in the CLI script, if there is nothing to report, just say it
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7167: Remove check_coherency
As suggested by Katrin, we've removed the call to check_coherency. It intended to provide readable comments when some SQL was wrong. Removing this sub result in the SQL error being displayed. That's OK because the sysadmin or the developer can google the error, understand it, then fix it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Changing in .sql parsing
We first split on delimiter and then extract comments. You can now put
\n for delimiter comments.
ex:
DELIMITER ;
-- this is a comment
SELECT * FROM my_table;
-- another comment
Before this patch, we had to write:
DELIMITER ;
-- this is a comment;
SELECT * FROM my_table;
-- another comment;
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve display + factorize get_queries
Despite it's size, this patch is dealing with display questions only:
* The text "comments" and "queries" was hardcoded in ajax-updatedb-getinfo.pl script. It has been replaced by a JSON call, returning 2 separate values, "comments:" and "queries:" is now in the template, making it translatable
* Some minor tweak in the display (like putting things in bold, displaying OK in green, warnings in yellow and KO in red)
* Reordering the column headers for more readability:
* Status column is merged with availability, column is after status
* Status/availability terms more clear: "Not applied" instead of "unknown", "Applied and OK", "Applied and failed", "Applied and forced" are the 3 other statuses
* Removed one click to display comments on DBREv not yet applied: before the patch, one had to click "Show details", then "Get comments", now, "Get comments" is enough
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX typos & moving a script to a proper place
* renamed availables to available
* renamed already_knows to already_applied
* fixed FSF & copyright headers
* removing a "use strict" because we already had use Modern::Perl
* fixed a tiny typo in about.tt
* moving update.pl to misc/bin because it's a CLI script
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add dependency File::Find::Rule
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: We want to execute non-numeric version with the -all option
Dealing with Marcel comment 100:
> Note that the current code around line 52/53 does not
> handle that correctly:
> Argument "\x{74}\x{65}..." isn't numeric in numeric ge (>=) at
> installer/data/mysql/update.pl line 52.
Now, a non-numeric DBRev will be applied if you provide the --all parameter, without throwing the error
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 reindentation & removing dead code
* The if (! defined $ENV{PERL5LIB}... block was wrongly intented
* The 3 lines running update.pl are useless: the update (new mechanism) is run from admin/updatedatabase.pl script. This part of install.pl is run only when you have "old style" DB revisions.
Summary:
* old mechanism = it's run as previously, by reaching the installer/install.pl?step=3 page, that applies all revisions
* new mechanism = when you log-in or reach mainpage.pl, you reach admin/updatedatabase.pl, where you can see what will be run, and run it
Tiny side effect = the check for old mechanism is now done *after* authentification (thus it's not done on each page call). It means that the user will have to enter login/password twice :
* first to log-in to Koha
* second to run installer/updatedatabase.pl?step=3
As the old mechanism is deprecated, we can expect this will happend only a few time in the history of a setup, it's not a big deal.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Don't raise an error in routine TableExists
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX merge
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 follow-up fix POD syntax to please koha-qa.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch makes the script read those parameters from the corresponding
$KOHA_CONF file.
Regards
To+
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Output of of the overdues script with -csv now contains country
from the first address in the patron account.
I checked output for 2 patrons, one with and one without country
in the patron's address.
All tests pass. Perlcritic fails before and after:
"require" statement with library name as string at line 29, column 12.
Use a bareword instead. (Severity: 5)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Replace \r with \n for newline in output for bulkmarcimport.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Fixed minor conflict in C4/Installer/PerlDependencies.pm
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch fix a typo that prevented report to be run
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Due to a limitation of Zebra, the register must be cleared *before*
doing shadow indexing if you want to reset the indexes. In light of
that, it does not make sense to do shadow indexing at all when
rebuild_zebra.pl is run with the -r switch. This patch makes -r (reset)
imply -n (no shadow).
To test:
1) Run `rebuild_zebra.pl -b -r -v -v -v`
2) Note that the script never runs the merge phase
Without the patch I see log lines refering to the shadow cache (enabling shadow spec=/home/koha/koha-dev/var/lib/zebradb/biblios/shadow:20G)
With the patch I don't see anything in the logs about shadow. I do however see lines about merging. I think it could just be a misunderstanding of the logs
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins 2012/10/31]
Added a new koha-index-daemon-ctl.sh script that uses the
'koha-index-daemon' provided by Koha::Contrib::Tamil (install via CPAN)
to process the indexing queue ('zebraqueue' for now, 'indexqueue' in the
future I guess :-P).
This script could be easily modified in the future for using another
index queue processing script (a more abstract indexing script for both Solr
and Zebra, etc). I removed all zebra-ish stuff from it.
Documentation patches will be provided as followups, once Mark Tompsett's
docs are pushed to avoid continous rebasing.
Tested to work on an up-to-date Ubuntu 12.04.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This allows the --framework option to be specified when running
bulkmarkimport. This option allows a framework code to be specified for
the records being imported.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass, perlcritic fails before and after.
Tested
- imported records with -framework FA, FA framework is used
- imported records without -framework, default framework is used
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.
On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription
On serial search 2 tabs is displayed (opened and closed subscriptions).
This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)
Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
new serial
- launch another search and check that the closed serial is into the "closed"
tab.
- You are allowed to reopen a subscription on the subscription detail
page and on the subscription result page. A javascript alert ask you
if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
displayed (catalogue/detail.pl, serials/claims.pl,
serials/serial-issues-full.pl, serials/serials-collection.pl,
serials/serials-edit.pl, serials/serials-recieve.pl,
serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
don't check the "Include expired subscriptions" checkbox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782: Followup: add some minor modifications
- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off by : Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Previously we used the "delete" command in zebraidx, which fails when
you try to delete a record that doesn't exist in the index. By changing
to the "adelete" command, we can reduce the likelihood of a failed
delete causing ghost records. A symptom of this problem is the warning
message occasionally encountered when indexing from the zebraqueue,
"[warn] cannot delete record above (seems new)."
To test:
1) Add a recordDelete action for a record that does not exist to
zebraqueue in MySQL:
INSERT INTO zebraqueue (biblio_auth_number, operation, server) \
VALUES (999999999, 'recordDelete', 'biblioserver');
2) Run `rebuild_zebra.pl -b -z -v [-x]`.
3) Note that you do not get the message "[warn] cannot delete record
above (seems new)".
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Before this patch:
* misc/maintenance/fix_mysql_constraints.pl FAIL
pod FAIL
*** ERROR: unterminated B<...> in file misc/maintenance/fix_mysql_constraints.pl
forbidden patterns OK
valid OK
critic FAIL
"require" statement with library name as string at line 25, column 12. Use a bareword instead.
+ I add a die on the open statement
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Help: fix_mysql_contraints.pl -h
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The script misc/cronjobs/smsoverdues.pl requires HTML::Template::Pro and
uses templates that do not exist in Koha. Since this has been true for
at least a year and a half, and no one is aware of anyone who is using
it, it seems prudent to remove the script so that no one is confused
and/or distressed by its non-functioning nature.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins]
It removes the obsolete zebraqueue_daemon.pl and koha-zebraqueue-ctl.sh
obsolete scripts too.
Several files are modified to address te removal/addition of these files.
I didn't run the install procedure as I was working on my laptop with a dev
setup, just set the symlinks. Now fixed things as proposed by wajasu
on comment #4. Any other suggestion please let me know.
Tested to work on an up-to-date Ubuntu 12.04.
Asked by wajasu, remove remaining obsolete zebraqueue stuff.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This script will remove these duplicate fines. To use, repeatably run this
script until there are no more duplicates in the database.
(fix_accountlines_rmdupfines_bug8253.pl)
Duplicate fines would happen if you upgraded to a 3.8 version that does not have the
bug8253 patch, and the misc/cronjobs/fines.pl is run. In 3.8 an upgrade to a more
granular date/time was not addressed for pre-existing fine entries and this script
removes the resulting duplicates. It also intelligently preserves the amount outstanding
for payments already applied. If your version already had the bug8253 patch at the time
of the upgrade, duplicate fines should not have been generatd.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Modify /misc/translator/translate script in order to manage properly alternate
OPAC templates.
To test it with new 'ccsr' template:
- Create the .po file:
./translate create fr-FR
Result: existing .po files are not modified. A new fr-FR-opac-ccsr.po file is
available.
- Install all templates :
./translate install fr-FR
Result: A new koha-tmpl/opac-tmpl/ccsr/fr-FR directory contains translated
templates.
- Update .po files:
./translate update fr-FR
Result: fr-FR .po files are update, include fr-FR-opac-ccsr.po
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Simple addition of the koha user to the sample cron file. Might help non-tech
users to get things like incremental indexing to work.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Current script check-url.pl checks URL found in 856$u by sending HTTP
requests, one by one. The next request can't be sent before the previous
one get a result, which can be very slow for dead URL. I propose a new
script which send multiple requests simultaneously which improve
drastically URL checking execution time.
This script is based on AnyEvent and AnyEvent::HTTP CPAN modules.
Add new dependencies AnyEvent & AnyEvent::HTTP.
See doc: perldoc check-url-quick.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This script batch deletes biblios which contain a biblionumber
present in file passed in parameter.
If one biblio has items, it is not deleted.
http://bugs.koha-community.org/show_bug.cgi?id=8674
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Created file with biblionumbers for bibs with and without items.
Only the bibs without items were deleted.
An eval { eval "require $module;" }; was replaced with
eval { eval { require $module; }; }; which is a no-op, meaning that
the linker was not getting loaded, and the catalog module was throwing
up a big nasty error every time someone tried to save a record with a
heading. This patch replaces the require with can_load from
Module::Load::Conditional, which is PBP-friendly, and offers equivalent
functionality.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The patches for bug 7001 removed the parseletter subroutine from
C4::Letters without updating the talking tech script to use the
new alternative. This patch rectifies that situation.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Expose authority import functionality to the command line import
scripts, and rename them from commit_biblios_file.pl and
stage_biblios_file.pl to commit_file.pl and stage_file.pl.
To test (note that these instructions assume you have a MARC21
installation and are using the provided sample file):
1. Find a file of authorities (a sample file with MARC21 authorities
is attached to bug 7475) and download it to your server
2. Stage the file using the following command (replace <filename> with
the name of the file you saved in step 1):
> misc/stage_file.pl --file <filename> --authorities
3. Note the batch number the script assigns to your batch
4. Commit the records using the following command (replace <batchnumber>
with the batch number you made note of in step 3):
> misc/commit_file.pl --batch-number <batchnumber>
5. Index the authorities Zebraqueue (or wait)
6. Confirm that the new authorities appear.
7. Create a matching rule with the following settings:
Code: AUTHTEST
Description: Personal name main entry
Match threshold: 999
Record type: Authority record
Search index: Heading-main
Score: 1000
Tag: 100
Subfields: a
Offset: 0
Length: 0
(note the ID of this matching rule)
8. Stage the authority file again, this time using the following
command:
> misc/stage_file.pl --file <filename> --authorities \
--match <matchingrule>
7. Revert the import with the following command:
> misc/commit_file.pl --batch-number <batchnumber> --revert
8. Index the authorities Zebraqueue (or wait)
9. Confirm that the records have been removed
10. Import an authority record with the Stage MARC/Manage staged MARC
tools in exactly the way you would for a bibliographic record,
but choose "Authority" instead of "Bibliographic" for the record
type.
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Testing plan delivers as it should.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 11 September 2012
* Add the code necessary to handle authorities with matching rules and
import batches.
* Update all the scripts that use the matcher and import batch code
to use the new API.
* Add authority records to the matching rules interface in the staff
client.
http://bugs.koha-community.org/show_bug.cgi?id=2060
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 11 September 2012
This should make saved reports more manageable.
Group/Subgroup hierarchy is stored in authorised_values,
categories REPORT_GROUP and REPORT_SUBGROUP, connected by
REPORT_SUBGROUP.lib_opac -> REPORT_GROUP.authorised_value
Database changes:
* authorised_values: expanded category to 16 chars
* created default set of REPORT_GROUP authorised values to match
hardcoded report areas
* reports_dictionary: replaced area int with report_area text, converted
values
* saved_sql: added report_area, report_group and report_subgroup;
report_area is not currently used, saved for the record
C4/Reports/Guided.pm:
* Replaced Area numeric values with the mnemonic codes
* get_report_areas(): returns hardcoded areas list
* created get_report_areas(): returns full hierarchy (groups with belonging
subgroups)
* save_report(): changed iterface, accepts fields hashref as input
* update_sql(): changed iterface, accepts id and fields hashref as input
* get_saved_reports():]
- join to authorised_values to pick group and subgroup name
- accept group and subgroup filter params
* get_saved_report():
- changed iterface, return record hashref
- join to authorised_values to pick group and subgroup name
* build_authorised_value_list(): new sub, moved code from
reports/guided_reports.pl
* Updated interfaces in:
cronjobs/runreport.pl, svc/report, opac/svc/report: get_saved_report()
reports/dictionary.pl: get_report_areas()
reports/guided_reports.pl
reports/guided_reports_start.tt:
* Reports list:
- added group/subgroup filter
- display area/group/subgroup for the reports
* Create report wizard:
- carry area to the end
- select group and subgroup when saving the report; group defaults to area,
useful when report groups match areas
* Update report and Create from SQL: added group/subgroup
* Amended reports/guided_reports.pl accordingly
Conflicts:
C4/Reports/Guided.pm
admin/authorised_values.pl
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/dictionary.tmpl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/guided_reports_start.tmpl
misc/cronjobs/runreport.pl
reports/dictionary.pl
reports/guided_reports.pl
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
