First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- syspref useDischarge
- the new table discharges
- the discharge notice
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch inserts the new notification template into the letters table.
It also add the insert statements into the language specific files.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Amended patch: Add the kohastructure.sql changes
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's preferable to limit the permission to delete shelves.
Apply both patches before testing, then follow this test plan
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to delete all public lists
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to edit all public lists
Followed test plan. Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The feed message transport type exists but nobody knows how it can be
used. This patch assumes nobody uses it and removes it.
Before removing the entry in the DB, the updatedb entry will check if no
foreign key exists in order to avoid a delete in cascade.
This path does *not* deletes the occurrences in the templates.
Test plan:
Apply this patch, execute the updatedb script and verify the
message_transport_types table does not contain the 'feed' entry if it was not
in use.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch will remove the confusing option to configure message texts for feeds.
Checked on a database with an existing feed type notice (not deleted) and
on one without any references to the feed message transport type (deleted!)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Updates the en permission file and adds a database
update to fix the permisson.
The update is done using the description, to not
untranslate non-English permission descriptions.
To test:
- Run the database update on your existing installation
and check the typo is gone
- Run the web installer and check there are no errors
and permissions are loaded correctly (and without typos)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This bug adds a new preference, "SubfieldsToAllowForRestrictedEdition,"
but the use of the term "Edition" in this context is incorrect. I think
it would be more clear to change the preference name to
"SubfieldsToAllowForRestrictedEditing." This patch makes this change.
I realize this isn't a big issue since the preference has a good
description, but I thought that if we were going to make this as clear
as possible now would be the time to do it.
To test, start with a database which hasn't previously been used to test
Bug 7673. Apply all patches and run the database update. Follow the test
plan as described in the bug.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, change appears complete.
All tests and QA script still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
3 permissions:
- edit_items_restricted
- delete_all_items
- items_batchmod_restricted
2 system preferences:
- SubfieldsToAllowForRestrictedEdition
- SubfieldsToAllowForRestrictedBatchmod.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes subtag_registry.sql from lang dirs,
and put it on a new mandatory dir
In that way we need to update only one file.
All similar files are removed.
To test:
1) Try a new install, or simply create a new database,
grant permissions on it, change koha-conf.xml to use
this database and go to staff page
2) Go step by step until all mandatory or optional sql
files are loaded. Check that subtag_registry.sql is
loaded.
3) Do it again but on other language. First install
translation and repeat 2), could use de-DE or fr-FR
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested with de-DE.
Thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. apply the patch
2. run updatedatabase.pl
3. install Croatian language
cd misc/translator
perl translate install hr-HR
4. go to Global system preferences > I18N/L10N preferences
check that Hrvatski(hr-HR) is available
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors.
Also tested translating to de-DE and on advanced search opac/staff
is listed translated.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: This also makes the language show up in the language pull
down in advanced search. Because the entry is the last in the file,
it will show last in the list. I am noting this here, the list
is not really consistently sorted right now and there is work under
way to change the way we handle this.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Corrects the German translation for 'Laotisch'
- Adds an icon to the reference item type
- Corrects capitalization for user permissions
To test:
- Run English web installer, make sure to select
the sample item types and all mandatory data
- Check user permissions appear correctly
- Check icon for REF itemtype is shown correctly
- Check that languages in Advanced Search appear
as normal
- Install German and check in language list on
advanced search 'Laotisch' now appears
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well following test plan.
No errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch converts the HOLD_PRINT notice to a HOLD notice
with a message transport type of 'print'.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds notices SHARE_INVITE and SHARE_ACCEPT in updatedatabase and
sample_notices.
Test plan:
Install or upgrade and verify that you have the new notice under Tools.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
"Fines and fees" is consistent with the description of the
main "updatecharges" permission; in some areas, "charges" by itself
can refer to loans, not fees.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Rephrases permission description a bit to make it clearer and easier to
translate.
Adds German descriptions as requested by katrin.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Tested with various permission combinations:
- superlibrarian
- updatecharges (full permission)
- only 'remaining permissions for updating charges'
It works as expected.
Note: I think we need a follow up to include the
'Forgive overdue charges' checkbox on the check in page
in the new permission.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds new sub-permissions to updatecharges, 'writeoff' for writing off
fees and 'remaining_permissions' for all other fee related activites.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Remove the 'writeoff' permission from your privileges
4) Attempt to write off a fee, you should not be able to
5) Re-add the 'writeoff' permission
6) Attempt to write off a fee, you should now be able to do so
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fix Armenian language description
To test:
1) Do a fake translation to Armenian,
mkdir koha-tmpl/intranet-tmpl/prog/hy-Armn
2) Go to Administration > System preferences > I18N/L10N
3) Armenian description looks like the second string in Bug description
4) Apply the patch
5) Run updatedatabase.pl
6) Reload page, now description look as first string in
Bug description (it's the sixth letter, similar to 't')
Ammended patch, wrong column.
Signed-off-by: Holger Meißner <h.meissner.82@web.de>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes the English sample file for translations and includes
a database update to correct the string in existing installations.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After some discussion in IRC I am throwing in some changes for the
English sample frequencies:
- Change Vol to Vol.
- Change No to No.
We had both forms in the file, now it should be consistent.
To test:
- Run English web installer installing all sample files, especially
frequencies
- Check installed frequencies
- Check available options creating a subscription
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mandatory:
- adds auth_values.sql and .txt with YES_NO referenced in patron_attributes.sql
- updates sample notices with redone slip templates (ISSUESLIP, ISSUEQSLIP,
RESERVSLIP, TRANSFERSLIP)
- adds German translations to subtag_registry.sql and copies updated file
from en to de-DE
- adds translation for new course_reserves permission to userflags.sql
- adds translations for new permissions in userpermissions.sql
- Fixes typo IndependantBranches in English userpermissions.sql
Optional:
- adds csv_profiles.sql and translation of the serial claims profile
- adds z39.50 servers for authorities to sample_z3950_servers.sql
To test:
- Run web installer in English
- check all sample files, make sure they all install without SQL errors
- check language list on advanced search displays correctly still
- check area/language list on tools > news displays correctly still
- check permissions for correct spelling of IndependentBranches
- Run web installer in German
- repeat checks from above
- also check: authorised values, especially existence of YES_NO
- all permissions are translated now
- slip notices are all there and look right
- new z39.50 servers for authorities are available
- csv profile for serial claims is available and works as expected
... and anything else you can think of.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds 2 circulation permissions: force_checkout and
lift_restriction.
During upgrade, these two permission are added to existing staff
users that already have the base circulate permission.
force_checkout allows a librarian to force a checkout if a limitation
occurred.
lift_restriction allows a librarian to lift a restriction for a patron.
Test plan:
1/ Find a debarred patron and go on the checkout page. The "Lift
restriction" button should be present only if the logged librarian has
the lift_restriction permission.
2/ If the force_checkout permission is set, a librarian should be
allowed to check out in several cases:
- age restriction
- the item is issued to another patron
- the item is not for loan
- the patron has overdue items
- the item is lost
- the item is a high demand item
- the item is reserved
- another case ?
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: The force checkout permission should not affect high holds
- typo checkout => check out.
- the force checkout permission does not affect high holds.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: Follow-up: Adding missing permissions to translated files
This patch adds the 2 new permissions to all remaining sample files.
If the permissions don't get installed, the problem is bigger than
having an English description.
Also adds back the question "Check out anyway?" for high demand items (HIGHHOLDS).
Test xt/permissions.t passes now.
Bug 10863: Rename lift_restriction with manage_restrictions
The pref manage_restrictions now takes into account "Lost card" and
"Gone no address" restrictions.
Test plan:
- log in with a user with manage_restrictions permission
- verify you can set/unset restrictions when editing a patron
- log in with a user without manage_restrictions permission
- verify you cannot set/unset restrictions when editing a patron
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Note: The AgeRestrictionOverride pref has to be set to "Allow" if you
want to override the age restriction, even if the new permission is set.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_frequencies.* files have been moved from optional
to mandatory directories.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_numberpatterns.* files have been moved from optional
to mandatory directories.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All sample files for numbering patterns are moved from optional
to mandatory.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The MARC Modification Templates system gives Koha users
the power to make alterations to MARC records automatically
while staging MARC records for import.
This tool is useful for altering MARC records from
various venders work with your MARC framework.
The system essentially allows one to create a basic script
using actions to Copy, Move, Add, Update and Delete fields.
Each action can also have an optional condition to check
the value or existance of another field.
The Copy & Move actions also support Regular Expressions,
which can be used to automatically modify field values during the
copy/move. An example would be to strip out the '$' character
in field 020$c.
Furthermore, the value for an update can include variables
that change each time the template is used. Currently,
the system supports two variables, __BRANCHCODE__ which
is replaced with the branchcode of the library currently
using the template, and __CURRENTDATE__ which is replaced
with the current date in ISO format ( YYYY-MM-DD ).
At its simplist, it can perform functions such as:
Copy field 092$a to 952$c
At its most complex it can run actions like:
Copy field 020$c to 020$c using RegEx s/\$// if 020$c equals RegEx m/^\$/
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- List of libraries in basket.pl is now sorted by branch name, not code
- When IndependantBranches is ON, user has only the possibility to set
basket branch to its own branch, or to no branch at all.
- When basket do not belong to any branch, selected branch by default is
connection branch (was 'no branch')
- added id attributes to both added li elements
- change description of 'order_manage_all' permission to make it
clearer.
- remove Test::MockModule dependency
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In connection to bug 4246, commit 591bae324 added
phone to the message_transport_types table in updatedatabase.pl
This should be done also for new installs via the .sql files of the web
installer.
I am adding it only to English now, basing this change upon the work in
reports 10509 and 10520. (I discovered this tiny omission there too.)
Test plan:
Apply patches 10509/10520.
Run new install or run this particular sql file from command line.
Note: If you only run this particular file, you do not need patch 10509.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: David Noe <drnoe@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes permission description in en and untranslated
installer files.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
An insert statement should contain the column names to avoid confusion and
future problems with table definition changes.
This patch updates the English userflags.sql.
Will send updates for the other languages in connection with replacing inserts
by updates for the additional languages (where possible). For userflags this
will be possible.
Test plan:
Do an install (English).
Or -- as a dangerous(!) alternative--:
Do this ONLY on a restorable database.
Delete all records in userflags. (Note: This cascades to permissions a.o.)
Run this file from command line.
Check if you have records again in userflags. (You also messed up your Koha.)
Restore your database.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested both ways myself :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Tested using second alternative
Just a note: if you update other lang files replacing INSERTs for UPDATEs
then you must install using EN and later apply lang files by hand.
If you do a translate first before webinstaller, and finish your install
in your lang, then that kind of file will fail.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
mysql> create database test;
Query OK, 1 row affected (0.00 sec)
% mysql -u koha -p test < installer/data/mysql/kohastructure.sql
% mysql -u koha -p test < installer/data/mysql/en/mandatory/userflags.sql
mysql> select count(*) from userflags;
+----------+
| count(*) |
+----------+
| 19 |
+----------+
1 row in set (0.00 sec)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Sorry, this followup fulfills K. Fischer request to
base de-DE file in english one.
The differences are small corrections and added languages.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Simply add catalan language.
No translation yet, so can't be really tested.
But it will come soon.
Until then, to test:
1) cp misc/translator/po/es-ES* to ca-ES*
2) do perl translate install ca-ES,
3) apply the patch
4) run updatedatabase.pl
5) enable language and display on system preferences.
6) check labels
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to current master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Trivial string substitution.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a new user permission overdues_report for the circulation module, and requires this permission to run the overdue items
report, rather than requiring full reports permissions.
Test plan :
With a user with permissions circulate_remaining_permissions :
- Add overdues_report permission to user
- Go to circulation home
=> you see "Overdues" link
- Clik on it
=> you are allowed to access and use this page
- Remove overdues_report permission to user
- Go to circulation home
=> you do not see "Overdues" link
- Edit URL : <server>/cgi-bin/koha/circ/overdue.pl
=> you are not allowed to access this page
- Go to main page
=> you don't have access to reports module
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
first, replicate:
go to More -> permissions on any user. Notice that it says various things "privileges, flags, permissions" they are interchangeable and inconsistent.
also note that some of the permissions are nonsensical and/or not descriptive enough, or not using canonical terminology (borrowers instead of patrons, for example)
To test:
interface consistency changes
-> means "turns into"
- page title - privileges -> permissions
- breadcrumbs - privileges -> permissions
- headings - privileges -> permissions
- "set flags" button -> save
Permissions that have changed description:
- Catalogue changes to "Required for staff login" in bold (this was the original impetus for this boatload of changes)
- reports
- editauthorities
- management
- serials
- updatecharges
- circulate
- parameters
- borrowers
- tools
- staffaccess
- edit_patrons (only on updatedb, not on new db)
- Read through and make sure there are no typos, and that the descriptions seem to jive with what privileges the permission gives the user. Suggestions are, in fact, welcome.
- If you are feeling ambitious, go ahead and create a new, clean database and check the wording there as well - it should match what has been done in the db update.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested both with existing database and new database
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Tested with existing database. Introduces no new mysql-isms.
Kudos for adding that syspref in bold, that got me when I first started with Koha
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fix two different errors that prevented sample notices
from being loaded into a fresh English Koha database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Hugh Davenport <hugh@davenport.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
English sample_notices.sql installs correctly after this
patch is applied. Web installer completes without any errors.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preferences (RenewalSendNotice - default no) to controll the renewal notice sending.
Added to installer languages the renewal notice template.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In table language_descriptions a lot of translations are missing (with the exception of French)
Additions need to be added to subtag_registry.sql (for new installs) and to updatedatabase.pl (for upgrading).
This Bug could be used as 'omnibus' for follow ups for other languages.
This patch adds German (and some missing French) translations.
Tested updatedatabase.pl
Would appreciate if somebody could test subtag_registry.sql.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested both, the updatedatabase and the sql file. Works well.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected some information about the provided sample data and corrected
text files to obey capitalization rules.
To test:
I suggest taking a look at the patch file and also taking a look at the
English web installer, checking if it works, if there are typos or wrong
information.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature will add the option of displaying a select quote
for the day on the OPAC homepage. It will include the addition
of a QOTD editor in the tools section of the staff interface
which will allow the addition, editing, and deletion of quotes.
A single system preference will enable/disable the display of
the QOTD on the OPAC homepage. A new granular permission will
also be added to conrol user access to the QOTD editor tool.
Possible extentions to this would be code to allow alternate
quote selection algorithms to be added to vary how the currently
displayed quote is selected from the table of quotes.
This patch is a squash of the following work:
--Adding quotes table to kohastructure.sql and updatedatabase.pl
Note: This patch is intended for a MySQL based installation only.
That means that it includes backticks because that is what is required
at this point in history to install Koha correctly on a MySQL based
installation.
Feel free to port this over to the Pg stuff in the data/Pg directory.
--Adding system preference to control display of QOTD on OPAC main page
--Adding sample quote data
These quotes are taken from various US presidents. I'm not sure these
are applicable to the rest of the world, so I'm leaving it to translators
and others to add sample quote data for other languages.
--Adding edit_quotes user permissions
--Squash with other db related patches in this series
--Adding quotes editor pages to tools
--Adding QOTD editor link to tools homepage
--Integration of DataTables into QOTD Editor
--Impleminting jEditable into the quote editor
--Adding delete and add option to editor
--Fixing OPAC display so the QOTD div does not show if no quote is returned
--Also removing useless code from tools/quotes.pl
--Adding spans around QOTD foo in opac-main.tt
--Also fixing quote selection logic to accomodate the possibility of
a single quote in the db a litte better.
--Changing timestamp column header to a more user-friendly 'Last Displayed'
--Fixing bug in quote selection logic. This bug caused a situation where
when the table had only a single quote with an id greater than 1 in it,
no quote would be selected.
--Fixing up sorting in the quote editor table. --jcamins
--Adding span element to quote separator --jcamins
--Overriding the default empty table message supplied by datatables-strings.inc
--Adds missing page heading
--Adds beginning of click-for-help elements.
--Refactors delete functionality to allow selecting of quotes to delete,
enabling multi-delete.
--Refactors saving added quote functionality so that striking <Enter>
saves the new quote.
--Refactors canceling aded quote functionality so that striking <Esc>
cancels the new quote.
--Removing debug console.log statements
--Implementng the YUI button widget/toolbar used on other pages.
--Adds a 5px radius to all YUI buttons to bring them into
conformity with the general trend toward rounded corners
--Fixes capitalization in quote editor
--Implements improvements suggested by jcamins and oleonard
--Adds DataTables Plugin dataTables.fnReloadAjax.js
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
new permission : edit_patrons
Plan test:
- Go on the page: tools > Patrons modification (modborrowers.pl)
- Enter a list of cardnumbers (or use a file)
- Modify one or more patron's fields (you can modify surname, firstname,
branchname, category, sort1, sort2, date of enrollment, date of expiry,
debarred date, debarred comment and borrower note)
- Save
- Check on the result page (or in database for non-displayed fields) if
modifications have been correctly made.
- re test with different attributes. For each attributes filled with an
authorized value category, you can select a value in a drop-down list.
Else it's a free input text. If your attribute is filled with a patron
category, the modification performs only on patrons belonging to this
category
- Save
- Verify on the result page
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Signed-off-by: Stéphane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
A frequently-requested feature for Koha, especially by special libraries, is
the ability to upload local cover images into Koha.
This patch adds a bibliocoverimage table, and image handling code in the
C4::Images module. Key features of the implementation include:
1. The ability to have multiple cover images for a biblio
2. Handling for "full size" (800x600) and thumbnail-size (200x140) images
3. Uploading images directly from the record view
The image display functionality by Koustubha Kale of Anant Corporation will
follow in a second patch.
Special thanks to Koustubha Kale and Anant Corporation for the initial
implementation of local cover images, and to Chris Nighswonger of Foundation
Bible College for his prior work on patron images.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Will add comments on Bugzilla.
Patch failed to apply because installer/data/mysql/sysprefs.sql had changed in master.
Corrected the same with this new patch.
This patch adds 2 columns in the aqorders table :
- claims_count : number of claims for an orders
- claimed_date : date of the lastest claim
In the lateorders.pl table, you can not select orders from different
supplier because there is just one letter sent after clicking the "Claim
order" button. So, it's logic that you want to select only orders from
this supplier.
Modification in C4/Letters.pm:
refactoring code for claimacquisition and claimissues letter type.
Now, fields for theses letters check the table name. It's not possible
to chooce aqorders.title, this field doesn't exist !
Furthermore, you can add a <order> tag around your item fields, like
this :
-- Begin example
<<LibrarianFirstname>>
<<LibrarianSurname>>
<<aqbooksellers.contact>>
<<aqbooksellers.address1>>
<<aqbooksellers.phone>>
<<aqbasket.basketno>>
<<aqbooksellers.phone>>
<order>Library : <<items.homebranch>>
In your possesssion : <<biblio.author>>. <<biblio.title>>.
<<biblioitems.publishercode>>, <<biblioitems.publicationyear>>.
Callnumber : <<items.itemcallnumber>>. doc type : <<items.itype>>
Barcode : <<items.barcode>>
Date for the return : <<items.onloan>>.</order>
<<LibrarianSurname>>
-- End example
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Sending messages will not work correctly without correct data in sample_notice_message_transports
and sample_notice_message_attributes tables. There is no way to configure those tables in Koha.
SQL files should be in the mandatory part of the web installer.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 6537 - Move installer/data/mysql/en/mandatory/sysprefs.sql to installer/data/mysql/sysprefs.sql
Bug 6537 - Make the web installer use installer/data/mysql/sysprefs.sql
Bug 6537 - New syspref files with only the prefs that differ from the default
I have mostly deleted old syspref files and created new ones, with a new name,
mainly in order to reduce the risk of merge conflicts if the old syspref files
are changed before this patch is pushed, if it is pushed.
See http://wiki.koha-community.org/wiki/Simplified_syspref_handling_RFC for
a description of how the new files were created to reflect sysprefs that
differ from the global default.
.txt files have been moved to reflect the new names of the SQL files they are
associated with.
Bug 6537 - Remove syspref-related tests in xt/
As far as I can see, the previous patches for this bug makes the syspref tests
obsolete, and this patch removes them:
xt/syspref.t
xt/check_sysprefs.t
Bug 6537 - Fix a problem in French syspref file
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Installs syspref MARCAuthorityControlField008.
Rebased June 1, 2011 for master.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Follow up patch for installing pref BasketConfirmations.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
This new system preference (in OPAC Features) allows libraries to
turn off reviewer photos entirely if they want to. The default is
for these photos to be shown.
Note that this setting is linked to ShowReviewer in that both of
them need to be turned ON for the avatars to be displayed.
Signed-off-by: Francois Marier <francois@debian.org>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Syspref allows the user to chose between the
Items home branch
Patrons home branch
Branch the item was checked out from
NULL
or OPACRenew
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Was being set to an invalid value ';'
resulting in weird behaviour where it looked set but was not
in practice
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fix JS error in /koha-tmpl/opac-tmpl/prog/en/modules/opac-user.tmpl
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Previous code would only allow for an auxiliary stylesheet on the same server. This checks for
http in the opaccolorstylesheet syspref. If it's found, sets a different variable pointing to the
remote server location. If not found, retains the previous css directory path.
Also modifies the description of opaccolorstylesheet in the installer files to reflect current
usage as an auxiliary stylesheet.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the ability to specify a field with alternate holdings
information for display when a biblio has no items associated with it.
Two sysprefs are added:
* AlternateHoldingsField specifies what field/subfields contain the alternate
holdings information. When blank, the alternate holdings information is not
displayed. The default is blank, as this is a new feature.
* AlternateHoldingsSeparator specifies the string to be used to separate
multiple subfields in the alternate holdings display. The default is ' '.
Example use case:
A library which does not have a 1-1 relationship between uncontrolled 852 fields
from a legacy system and actual physical items on the shelf wishes to display
holdings information from the 852, but does not want to create item records
which are almost certain to be inaccurate. By enabling the alternate holdings
feature (AlternateHoldingsField = '852abcdhi' and AlternateHoldingsSeparator =
' -- '), the library is able to gradually add item records as they locate the
physical items, without losing the holdings information presently stored in the
uncontrolled 852 fields.
To test:
1) Set AlternateHoldingsField to '852abcdhi'
2) Set AlternateHoldingsSeparator to ' -- '
3) Change the hidden value of subfields 'a', 'b', 'c', 'd', 'h', and/or 'i' of
field 852 to 0 so that they display
4) Create a record which has data in the 852, but no item record
5) Look at holdings tab, where the data you entered should be displayed
Proof-of-concept initially developed for the American Numismatic Society.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This will work similar to 'Show volumes' links from traced series records and
set records. A link to search for analytics linked to serials.
A new syspref will be added: UseControlNumber.
This syspref will make it possible to determine, if $w and Controlnumber are
used for linking of records in bibliographic records.
If syspref is OFF (default), the search links will not use control numbers
but keywords.
If syspref is ON links will be built using Control-number and rcn index.
NOTE: 773$a is added to index Host-item. For testing on a dev installation:
copy record.abs to your koha-dev folder and reindex!
Rebased against 3.03.00.035 and a small typo fixed by Jared Camins-Esakov.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a new syspref ShowReviewer.
If ON (default) the reviewer/author of an OPAC comment will show.
If OFF the reviewer's name will be hidden.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Enables the library to choose whether to have patrons scan their barcodes for self checkout, or login
with username and password. Uses 'checkpw' for compatibility with LDAP authentication.
Also introduces a few new system preferences to make Self Checkout more secure and manageable:
SelfCheckTimeOut: the number of seconds before the self-checkout login times out for a patron
AllowSelfCheckReturns: indicate whether or not patrons can return materials via self-checkout
SelfCheckHelpMessage: user-configurable HTML to show specific text on the Help page.
Thank you to Marlboro College in Marlboro, VT for sponsoring and testing this development!
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Add an option to the OPAC to display the URI that is stored in the 856u field
as an image instead of a text link. This would be implemented in the OPAC XSLT
style sheets for the Results and Details pages, and would require that the
corresponding OPAC XSLT option be set.
This enhancement is designed to enable the staff to catalog images, then have
them appear on the resulting pages in the OPAC when searching. Clicking on the
image would open it full size. If the image option is in use, then the default
link text would be disabled. Custom text would still appear if entered in the
"URLLinkText" option.
Add system preference "Display856uAsImage" with options of Results page,
Details page, Both Results and Details pages, Neither Results or Details page.
Notes for documentation manager:
There are two system preferences added for this enhancement:
OPACDisplay856uAsImage and Display856uAsImage. These appear on the OPAC and
Staff Client screens under the System Preferences.
The preference can be set to one of four options:
Both Details and Results pages
Details page only
Neither Details or Results pages
Results page only
In addition to this option being set, the corresponding XSLT option must be
turned on. Also, the corresponding 856q field must have a valid MIME image
extension (e.g., "jpg") or MIME image type (i.e. starting with "image/"), or the
generic indicator "img" entered in the field.
As of 14 March 2011 the UNIMARC xslt display files also require a "0" in the
second indicator location of the 856u field for the links to be activated. This
is not true for the MARC21 display files.
When all of the requirements are met, an image file will be displayed instead of
the standard link text. Clicking on the image will open it in the same way as
clicking on the link text.
Rebased and three original patches squashed into one on 30 March 2011 by Jared
Camins-Esakov.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Doug Dearden <dearden@sarsf.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a new system preference, COinSinOPACResults, which toggles the inclusion of
COiNS/OpenURL/Z39.88 in the search results display. Default is 'on', continuing
the current behaviour.
Disabling this feature will result in a significant increase in search speed, since
each call to GetCOinSBiblio requires a separate parsing of the MARC record, and there are
<OPACnumSearchResults> calls to this routine with each search.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Implements the RFC found at http://wiki.koha-community.org/wiki/Hard_Due_Dates_Circ_Rule_RFC. See squashed commits
messages below for details of implementation.
Squashed commit of the following:
commit 871b91af00871146eb1216ebf5ce673dda2c5925
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Tue Dec 28 15:09:49 2010 -0500
Hard Due Dates dev part 3: implementing the due dates in circ
CalcDateDue now calls GetLoanLength, rather than each invocation running separately one after another. Therefore, instead of
the 'loanlength' param, CalcDateDue now takes 'itype', and uses the info to get both the issuelength and the hardduedate info (if it exists)
Global Due Date no longer populates in the sticky due date field in Circ, since it can't be determined before the item is scanned. Any specified
due date still overrides the circulation rules, if allowed.
Hard Due Dates in the past will return an error message, but can be manually specified if truly desired.
Also, a small fix to updatedatabase.pl to allow the old data to populate if possible.
commit 14d5505f3c01287a2464a759f0076c1d4b665c49
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 18:28:11 2010 -0500
HardDueDates dev part 2: adding admin interface
Adds columns to Smart Rules page, including calendar for easy date selection.
Removes globalDueDate and ceilingDueDates from system preferences editors
commit 76e3e3d86a7a54c6ce4253e7f68278b4dc75a0bb
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 15:58:05 2010 -0500
HardDueDates dev part 1: database changes
Adds two new columns to issuingrules, a hardduedate and a hardduedatecompare. If globalduedate is set, use that as the universal value
for all circ rules. Else, if ceilingduedate is set, use that as the universal value. Adjust the comparison accordingly (-1 before, 0
exact, 1 after). the old system preferences globalDueDate and ceilingDueDate are then removed.
Rebased onto 3.03.00.032
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch contains only the install stuff. (Functionality in previous patch.)
Rebased on March 28.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When XSLT is enabled, the subject tracings on the details view (both OPAC and
Intranet) previously only searched on the subfield 'a'. In addition, searches
failed when the tracing included parentheses, and the XSLT display did not
include subfields other than abcdvxyz, even for those 6xx tags that have other
subfields.
This patch adds a syspref: TraceSubjectSubdivisons. When
TraceSubjectSubdivisions is set to "Don't include" (default), the subject
tracings in the XSLT details view will only search on subfield 'a'. When
TraceSubjectSubdivisions is set to "Include", the subject tracings will search
on all subfields, not just subfield 'a'.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a new syspref FineNotifyAtCheckin.
With syspref ON there will be a message when checking in books from
a patron with outstanding fines.
With syspref OFF (default) no message will be shown.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds two sysprefs:
OpacFavicon
IntranetFavicon
The two sysprefs take full URLs to an alternate favicon.ico file for the OPAC
and Staff Client, respectively. Leaving them blank will use the favicon.ico file
that is included with Koha.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
On OPAC/staff result page facets are truncated to 20 characters. On some OPAC
layout, it's not enough. A new syspref FacetLabelTruncationLength defines the
length to cut facets if necessary.
This patch add the syspref to searching.pref and add it to syspref various
language default values loaded into DB during installation process. It's not
necessary to update DB since length is fixed to 20 (as before) when this
syspref isn't defined in systemprefercences table.
Rebased to last HEAD: 2011.03.18
[Documentation] FacetLabelTruncationLength syspref in Searching tab
[3.2] It doesn't apply.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds prefs for facets in sql install files and updatedatabase script.
Rebased on March 17.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the syspref TraceCompleteSubfields. When TraceCompleteSubfields
is set to "force," clicking on links in non-authority controlled subject
tracings will only find other records where the entire subfields match. Leaving
it at "don't force" keeps the current behavior of doing a keyword search of the
subject indexes.
This patch implements complete-subfield subject tracings in MARC21 XSLTs (OPAC
and Staff) and all Normal mode interfaces. UNIMARC XSLTs have not been updated.
This patch also adds the syspref UseAuthoritiesForTracings. When set to "Do not"
tracings in the XSLT detail displays will never generate links using authority
numbers, but rather use the heading strings (NB: the tracings currently use only
subfield 'a' for generating links).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jane Wagner <jwagner@ptfs.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* add the AuthoritiesLog system preference to all
language installer SQL scripts
* options for a 'YesNo' should be '', not '0'
* fix wording glitch on preferences page
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds two sysprefs to allow libraries more fine-grained control over
when fines can and can't be overridden. The two sysprefs are:
* AllFinesNeedOverride - when this syspref is set to "Require" (default) any
fine will require a staffmember to override the fine in order to check out a
book. When set to "Don't require," fines below noissuescharge will not need
any override.
* AllowFineOverride - when this syspref is set to "Allow," staff will be able to
override fines that are above noissuescharge. When set to "Don't allow"
(default), staff will not be able to check out items to patrons with fines
greater than noissuescharge.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reimplements Paul Poulain's original OPAC Privacy patch, with some minor improvements and changes to wording
If the library enables the OPACPrivacy system preference along with the opacreadinghistory preference, and sets
an AnonymousPatron (must be a valid patron number in the database), the user will see a new tab upon login to
the OPAC, My Privacy. From there, the user can:
- Set their OPAC Privacy to one of three values
0 - Forever. This keeps their reading history unless they explicitly delete it; the bulk anonymiser won't touch it
1 - Default. Keep reading history until either they delete it or the library does
2 - Never. Instantly anonymises reading history upon item return
- Instantly delete their reading history
There is a warning and a popup to confirm. I've removed Paul's extra confirm checkbox, which seemed redundant
A note of which preference the patron has selected is added to the Patorn Details page in the staff client. This is read-only.
This patch also consolidates Privacy system preferences into the Privacy section of the OPAC tab.
Thank you to BibLibre for the original implmentation of this patch, and Los Gatos Public Library for funding and
testing the reimplementation.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds three system preferences: ShelfBrowserUsesLocation,
ShelfBrowserUsesHomeBranch, and ShelfBrowserUsesCcode. These can be
toggled to determine whether the shelf browser will ensure that the
items being show will match against location, homebranch, or collection
code, respectively.
Note that this also involves a bit of a refactor to clean up the shelf
browser code.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reinstates the deleted maxItemsInSearchResults system preference, which was erroneously thought to no longer be utilized.
It's removal has led to bug 4430
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
