See comments on Bugzilla report and wiki roles page for 18.05.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
First moved all relevant 17.11 release team entries to the development
section, and then updated the release team section from the wiki 18.05
roles page.
Test plan:
[1] Check if Koha team tab on about looks as it should.
[2] Verify changes with 17.11 and 18.05 roles.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds current date and time, formatted as configured.
It makes the timezone name be displayed the system uses it (important
for the 'local' use case).
It removes some warnings too.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds C4::Context->timezone bad timezone handling.
The calculated 'effective' timezone is tested with the right tool and a
fallback to 'local' is added. A warning is printed in the logs.
A test for this is added to about.pl too, along with the right warning
messages in case of problems.
Tests are added for both invalid TZ and to make sure the warning is
raised.
To test:
- Apply the patch
- Run:
$ kshell
k$ prove t/timezones.t
=> SUCCESS: All tests pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Before patch: No timezone section
After patch: timezone section at bottom of
Server information tab.
Actual is what is being used. Config overrides environment variables.
So if there is confusion why the environment variables aren't working,
it will be visible why.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates various unrelated templates to use the Bootstrap
grid.
- about.tt - The about page
- auth.tt - The login page
These pages should look correct.
- reports/reports-home.tt - The reports home page
- admin/admin-home.tt - The administration home page
These pages should look correct, with a single centered column
with wide margins on either side. At lower browser widths the margins
should disappear.
- serials/subscription-add.tt - Serials -> Add subscription. The entry
form should look correct during each step of the add/edit process.
- suggestion/suggestion.tt - Acquisitions -> Suggestions -> New
suggestion. The page with the new suggestion form should look correct.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the existing code for SCO use the new permissions schema
for self check modules. Specifically addresses this change:
circulate => self_checkout
becomes
slef_check => self_checkout_module
about.pl checks are dejusted too.
get_template_and_user gets refactored to avoid code duplication and the
conditions are adjusted for the new permissions.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds Elasticsearch related information to the 'About' page.
The information is gathered and displayed only when the 'SearchEngine' syspref
is set to 'Elasticsearch'. It displays configured nodes, and the status:
- Running
- Not running
In case it is running, it displays the defined indices and the document count on each.
If there are configuration problems, exceptions are catch and a convenient warning
message is displayed.
To test:
- Apply this patches
- Run:
$ kshell
k$ prove t/Koha/SearchEngine/Elasticsearch.t
=> SUCCESS: Tests pass!
- Have ES configured in your koha-conf.xml file (by default in kohadevbox)
- Set the 'SearchEngine' syspref to 'Elasticsearch'
- Comment out pieces of the elasticsearch-specific entries (server, index_name,
the whole elasticsearch block). Reload on each change.
=> SUCCESS: Warning messages are displayed and make sense in the context of your changes.
----> the rest of the tests require having ES running on the dev env. This can be easily
achieved by creating the kohadevbox using:
$ KOHA_ELASTICSEARCH=1 vagrant up
- Stop the 'elasticsearch' service:
$ sudo service elasticsearch stop
- Reload about.pl
=> SUCCESS: The configured nodes are displayed, and the status is 'not running'
- Start the 'elasticsearch' service:
$ sudo service elasticsearch start
- Reload about.pl
=> SUCCESS: The configured nodes are displayed, the status is 'running' and
created indices info is displayed, along with the document count
on each index.
- Sign off :-D
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds checks to the configured (or fallback) partner_code.
It produces two different warnings:
- Configured partner_code doesn't match an existing patron category
code.
- partner_code is not defined, a fallback to ILLLIBS is done
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
5/ This patch makes Koha::Illrequest->load_backend raise an exception
if the passed backend is invalid. This way we will catch more errors introduced.
The patch also disables the 'New Ill request' when no backends are available. Gets
rid of a related warnings.
Both OPAC and Intranet now display a warning message when no backends
are available.
Tests are added for the load_backend changes.
4/ This patch fixes the path for the checkboxes jquery plugin, and removes the include
for tablesorter, as this implementation uses Datatables. This is obviously code for older
Koha, ported to master.
TODO: There's something wrong on the styling. My idea is to get rid
of the custom column visualization tool, and have it display as regular
DataTables. We can then introduce the use of colvis on a separate bug
report.
Note: POD coverage for the exceptions file is wrongly tested. It is a false positive.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The warnings about database problems introduce new translatability problems,
mostly related to sentence splitting by html tags.
To test:
- Verify that text changes make sense
- Apply patch, verify that messages properly.
Note: To force display you might want to add '1 ||' to the related
if statements, including line 134, e.g. [% IF 1 || has_ai_issues %]
- Bonus test: Go through an translation cicle and verify that fragemts as
mentioned in initial comment are gone.
(Amended to fix tiny typo)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the release team for 17.11 to about template.
Test plan:
Check the changes with the wiki pages for 17.05 and 17.11.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Images display correctly. Followed test plan and patch works as described.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Close the p tag and add a br tag to visually divide the two sections
Data problems and Warnings regarding system configuration.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Discovered the problem when testing a duplicate key in deleteditems.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some minor style and idiomatic issues.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
See the following wiki page for more information
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
Test plan:
Create (at least) a patron, a checkout, a biblio and a hold
Then fill the old_* or deleted* tables with:
INSERT INTO deletedborrowers SELECT * from borrowers WHERE borrowernumber=XXX;
INSERT INTO deletedbiblio SELECT * from biblio WHERE biblionumber=XXX;
INSERT INTO old_issues SELECT * from issues WHERE issue_id=XXX;
INSERT INTO old_reserves SELECT * from reserves WHERE reserve_id=XXX;
Go to the about page, 'System information' tab. You should see a new
"Data problems" section with the list of the ids that are wrong
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan same as in previous patch
Run QA tools in newest version (test for line breaks in tt directives)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Translation tool picks a line
%s [%% IF warnPrefBiblioAddsAuthorities || warnPrefEasyAnalyticalRecords ||
...due to a line break inside a template directive.
This patch fixes it.
To test:
- Update QA tools
(see https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=18675#c2)
- Verify that code change makes sense
- Apply patch
- Run QA tools
Followed test plan and everything was as intended
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changes to about.tt in sections release team and development team.
Notes:
[1] We do not have a QA manager in 17.05 any more.
[2] Martin Renvoize has been added to the QA team of 16.11 after the
election; this was not adjusted in about, but has been added in the
Development team section now.
Test plan:
Compare about:Koha team with roles for 17.05 page on the wiki.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is the Koha part of the Hea v2 project.
You can find the (testing) code for the server at
hea-ws - https://github.com/joubu/hea-ws/commits/v2
hea-app - https://github.com/joubu/hea-app/commits/v2
They contain the different pull requests made over the last 6 months.
More information on Hea at https://wiki.koha-community.org/wiki/KohaUsageStat_RFC
The goal of this commit message is to provide an overview of what could
be a new version of Hea.
Prior to these changes, the Hea database was filled with 1 line per Koha
installation. System preferences were filled by the libraries and a
cronjob (share_usage_with_koha_community.pl) collected these values to send
them to a webservice (hea-ws/upload.pl).
With the need to collect more data we would want to collect data at the library
level (branch) and not at the installation level.
For instance the geolocation, the url or the country can be different from one
library to another, even if managed from the same Koha installation.
The Hea DB has been upgraded to reflect that change (see hea-app/sql/schema.sql).
The hidden goal of this patch is to make Hea sexier and explain
better to libraries how it can be useful to share their information
with the Koha community. I guess the main problem is the lack of
communication and explanations about what we are doing we these data.
To fill this gap I'd like to (TODO)
1. Communicate on the ML about this new version of Hea (once it got
pushed and backported)
2. Link the Privacy_Policy.md from the Hea interface
3. Get help from a native English speaker to add
popup/help/info/whatever on "Home › Administration › Usage statistics",
to clearly explain what happens (and what will not happen!) when an option or
another is set.
You can find screenshot of this whole enhancement on bug 18066, comment 2.
What this patch does:
- Create a new branches.geolocation DB field
- Add 3 new sysprefs:
* UsageStatsGeolocation
* UsageStatsLibrariesInfo
* UsageStatsPublicID
- Integrate the Leaflet JS library to get a fancy map to pick
geolocations
How does it works:
On the new administration page where statistics to share are configured,
there are several new things. It is now possible to share information either
per Koha installation or libraries. If UsageStatsLibrariesInfo is set,
the info at library level (url, name, country, geolocation) will be
sent to the Hea webservice. If it is not set, you can decide to fill
UsageStatsLibraryUrl, UsageStatsLibraryName, UsageStatsCountry,
UsageStatsGeolocation to share these information. Note that even if the
data are retrieved at installation level, it's better to fill the prefs
as well: On the Hea website the different libraries defined for a given
Koha installation could be displayed on the same page.
This page is a public page which will be attributed to every
installation (with the pref UsageStatsPublicID). On this page all the
info available publicly will be displayed.
TODO later:
- Add a button on the administration page to delete the info shared
publicly. It will be easy to show that the info are no longer displayed
on the public page.
- Add an icon per Koha installation to get a better "public page"
- Any suggestions?
Test plan:
We will need to test hea-ws, hea-app and the Koha-side code to test the
whole enhancement.
1/ To start, clone the hea-ws and hea-app project and checkout the
'master' branch (*not* 'v2')
2/ Create the hea database and user
CREATE DATABASE hea
CREATE USER 'hea'@'localhost' IDENTIFIED BY 'hea';
GRANT ALL PRIVILEGES ON hea.* TO 'hea'@'localhost';
FLUSH PRIVILEGES;
3/ Fill the DB with some data
mysql hea < hea-app/sql/schema.sql
mysql hea < hea-app/sql/sql/mock-data.sql
4/ Checkout the 'v2' branch for both hea-ws and hea-app
5/ Execute the upgrade DB script
% cd hea-app
% perl -p -i -e 's/REPLACE_ME/hea/' sql/upgrade.pl # Fill the DB info
% perl sql/upgrade.pl
Now the DB is using the v2 structure. That means we have 1 installation
row per library previously defined. 1 library row has also been created.
5/ Configure hea-ws
% echo '192.168.50.1 hea.koha-community.org' >> /etc/hosts
<VirtualHost *:80>
DocumentRoot "/path/to/hea-ws"
ServerName "hea.koha-community.org"
<Directory "/">
Options +ExecCGI
Require all granted
AddHandler cgi-script .pl
</Directory>
</VirtualHost>
And enable it with a2ensite, then restart apache.
The copy the database.yml.sample to database.yml and edit it to fill the
DB info.
6/ Launch the hea-app
% cd hea-app
% edit README.md # to install the missing modules
% cp environments/config.yml environments/development.yml
% edit environments/development.yml # to fill the DB info
% perl bin/app.pl
Then hit localhost:3000
You should see a local version of Hea with sample data
7/ Back to Koha side
A. We will test that the webservice still works with previous version of Koha (without v2)
a. Do not configure Hea
% perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
Then hit localhost:3000
=> Nothing added
b. Configure Hea on admin/usage_statistics.pl
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> New library added
c. Modify the Hea configuration
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> Info are modified
B. Not we will test that it works with the new version (much more fun ;))
% git checkout hea-v2 # koha
a. Configure Hea using /admin/usage_statistics.pl
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> Check the result on localhost:3000
b. Share libraries's info
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
c. Continue to play a bit and share the info.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Missed one typo in about.tt.
Can go along with the next patch here.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to tell the administrators that it would be great for them to
set this config entry.
Test plan:
- Do not set template_cache_dir and confirm that you see the warning
- Set template_cache_dir and confirm that you do not see the warning
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Both templates for koha-conf.xml are updated. After applying the
patach a warning was correctly displayed. After adding
template_cache_dir to koha-conf.xml and restarting memcached it
went away.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
