Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Missed updating this file when I added another option and renamed another
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On the staff side behaviour differs for default pickup location when placing a hold or
placing an overridden hold. Additionally, the behaviour has changed betwee master and stables
We should provide a consistent default, and allow the library to specify their choice
Note this only affects staff client as there is only a single dropdown on OPAC and it is not
tied to items
To test:
1 - Apply patch
2 - Update database
3 - Find a record with items from various branches, and at least one with a different home/holding branch
4 - Ensure there is an item that requires override to hold, and AllowHoldPolicyOverride is enabled
4 - Attempt to place hold
5 - Confirm all dropdowns default to logged in library
6 - Set DefaultHoldPickupLocation to item's home branch
7 - Refresh and confirm all dropdowns match item home library except biblio level hold - still logged in library
8 - Set DefaultHoldPickupLocation to item's holding branch
9 - Refresh and confirm defaults
10 - Mark one of the items holding library as 'not a pickup location' in Admin->Libraries
11 - Refresh and confirm dropdown is now empty for that item
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The road of excess
leads to the palace of wisdom;
for we never know what is enough
until we know what is more than enough.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
TaxRates was not moved when renamed from gist, just moving it down
so things are tidy again.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch add 2 new system preferences:
- GenerateAuthorityField667
- GenerateAuthorityField670
When Koha creates authority records from biblios, use these preferences instead of the hard-coded "Machine generated authority record." and "Work cat." values.
Test plan:
1. Make sure AutoCreateAuthorities and BiblioAddsAuthorities are enabled in the system preferences
2. Go to Home › Cataloging › Add MARC record and add a new record
3. Fill in the required fields and add a name in the 100$a field. Note the name, and add the new record.
4. run rebuild_zebra.pl -a
5. Go to Home › Authorities and search for the name you entered in 100$a
6. Select details and look at the 667 and 670 fields. They should default to the hard-coded values.
7. Apply patch, run update database
8. Edit the new GenerateAuthorityField667 and GenerateAuthorityField670 system preferences
9. Do 2-6 . Now the 667 and 670 fields should be what you entered in the system preferences.
Thanks for testing
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1. Confirm that
installer/data/mysql/atomicupdate/bug_23352-add_ccode_column_to_subscriptions_table.pl
has the exec flag
2. Create a subscription. Notice the 'Collection' dropdown defaults to
the 'None' option - same as Location
3. Save the subscription without changing the 'None' collection
4. Receive the serial and confirm the 'Collection' field is empty
5. Create a second subscription. Change the 'Collection' dropdown to
'Fiction', then save the subscription
6. Receive the serial and confirm the 'Collection' dropdown is set to
'Fiction'
7. Confirm that the 'Collection code' terminology in the template is replaced with
'Collection'
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new STAFF_PASSWORD_RESET notice template for password
recoveries initiated via the staff client as aposed for those initiated
by the end user.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Chmod 755 on atomic update file.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Note: Problem is that we cannot know if default was translated
or en contains the original notice. Actually this holds for
the other languages too. So this is an educated guess without
using the lang field.
Test plan:
Run db rev.
Trigger the warning by replacing Pages by PPages in an AR notice.
Run db rev again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Note: It will be hard to update translated notices. If we cannot find
the part 'Pages:' then the replace does not do anything.
Test plan:
Run db rev.
Check an existing AR notice (English).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Run a new install. Check the AR notices.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new page opac-reset-password where a user cna enter their login
(userid or carndumber), current password, and new password.
If the user has a password expiration date and the current password is correct and
the new passwords match and meet requirements their password will be updated and the
expiration date reset
A patron whose password does not expire will be reidrected to login to change their password
To test:
1 - Apply patch, updatedatabase, enable new syspref EnableExpiredPasswordReset
2 - Set 'Password expiration' for a patron category
Home->Administration->Patron categories->Edit
3 - Create a new patron in this category with a userid/password set, and an email
4 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration='2022-01-01' WHERE borrowernumber=51;
5 - Give the borrower catalogue permission
6 - Attempt to log in to Straff interface
7 - Confirm you are signed out and notified that password must be reset
8 - Click 'Reset your password' link
9 - You should see the reset password page with fields for: login, current password, new password, conmfirm password
10 - enter invalid/incomplete credentials
11 - Confirm you are notified of invlaid credentials
12 - Fill in all fields, but enter current password as new password
13 - Confirm you are notified of no change
14 - Set minimum password length / strong password requirement for category
15 - Confirm you receive error if new password too short or not secure
16 - Enter a valid new password and submit and confirm update is successful
17 - Confirm you have buttons to go to OPAC or Staff and that both work
18 - Confirm you cna log in (i.e. expiration has been reset)
19 - Expire the users password
20 - Remove catalogue permission
21 - Reset password again and confirm only OPAC link
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- The atomicupdate didn't have "bug_number" defined.
- The "Your password has expired" message is now styled with the same
class as other OPAC login messages.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1. Apply patch and run updatedatabase
2. Enable 'UseCashRegisters' syspref and create at least one cash
register for your library
3. Verify that you have several authorized values in the 'PAYMENT_TYPE'
category. One of them should be 'CASH'
4. Go to a patron accounting tab, create a manual invoice and go to the
payment form. Select payment type 'CASH' and verify that you cannot
submit the form if no cash register is selected.
Select another payment type and verify that you can submit the form
even if no cash register is selected
5. Set syspref 'RequireCashRegister' to 'always require a cash register'
6. Repeat step 4 but this time you should not be able to submit the form
if no cash register is selected, no matter which payment type is
selected.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The payment type is already required when using the cash register
feature, but some users want to force selecting a payment type even
when cash registers are not used
The new system preference name is RequirePaymentType
Test plan:
1. Apply patch and run updatedatabase.pl
2. Disable UseCashRegisters and RequirePaymentType sysprefs
3. Create some authorised values in PAYMENT_TYPE category if needed
4. Create a manual invoice and pay it. Notice that the payment type is
optional.
5. Enable RequirePaymentType
6. Create a manual invoice and pay it. Notice that the payment type is
now required.
7. Enable UseCashRegisters and verify that the payment type is always
required, even if RequirePaymentType is disabled
Rebased by Thibaud Guillot <thibaud.guillot@biblibre.com> on 21-12-02
Signed-off-by: shiyao <shiyao@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When a recall triggers a branch transfer, the reason for the transfer is
'Recall'.
When a transfer is cancelled that was triggered by a recall, depending
on where it is cancelled, will use the 'Manual' or 'CancelRecall'
cancellation reasons.
This patch ensures branchtransfers.cancellation_reason adds 'CancelRecall',
and branchtransfers.reason adds 'Recall' as options.
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patchset adds the display of all matches found during import to the import management screen
A staff member with the permission to manage batches will be able to select for any individual record which match, or none, should be used during import
To test:
1 - Import a batch of records or export existing records from your catalog
2 - Import the file (again) and select a matching rule that will find matches
3 - Note that you now have radio buttons allowing you to select a record, or none
4 - Test scenarios:
I - When 'Action if matching record found' is 'Ignore'
a - Imported record ignored if match is selected
b - 'Action if no match found' followed if no match is selected (Ignore matches)
II - When 'Action if matching record found' is 'Replace'
a - The chosen record is the one overlayed (you can edit the chosen record before importing to confirm)
b - 'Action if no match found' followed if no match is selected (Ignore matches)
III - When 'Action if matching record found' is 'Add incoming record'
a - Record is added regardless of matches
5 - Confirm 'Diff' 'View' links work as expected
6 - Confirm that after records are imported the radio buttons to choose are disabled
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Bug 22785: API files
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
