Minor changes to pay.pl and paycollect.tt to allow writing off a partial amount of a fine.
Test plan:
0) Go to the Fines tab of a test patron's profile
1) Create a fine if there are none (under the Manual invoice tab)
2) Go to the "Pay fines" tab
3) Press the write off button on the corresponding account line
Without patch, you'll be asked to confirm, but will not be able to edit the amount
With patch, you'll be able to edit the amount.
Followed test plan, patch worked as described. Also ran QA test tool and
modified files passed
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To avoid $account, $accounts and @accounts variables in the same scope
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Previous changes were wrong, the notify_id was always equal to 1 and
GetBorNotifyAcctRecord was used to retrieved the account lines to pay
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It appears that has never worked.
Could someone confirm?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Our librarians requested a reminder to unset "gone no address" flag from patron's
record once the patron has made a modification request to update their address.
I propose adding a message box under patron modification request to notify
librarians about patrons that have gone no address flag on, and an option to
unset the flag without the need of having to navigate into patron's details.
To test:
1. Apply patch
2. Set "Gone no address" flag for your test patron. You can do this by going
to patron modification screen in staff client.
3. Go to OPAC with your test patron
4. Make a modification request for your personal details
5. Go to staff client and see pending modification requests
6. Open the request you just created
7. Observe a message dialog that says this patron has gone no address flag set
8. Check the checkbox to unset the flag and approve the modification request
9. Click Submit
10. Observe your test patron no longer has gone no address flag set
11. Repeat steps 2-7
12. Do not check the checkbox, but approve the modification request
13. Observe your test patron still has gone no address flag set
14. Remove the gone no address flag from your test patron
15. Repeat steps 3-6
16. Observe there is no message dialog for gone no address
Followed test plan, patch worked as described. Also ran QA test tools
and all modified files passed
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Have a patron with some current and old reserves
1) Go to patron circulation page
2) Notice, there is new item called "Holds history" in the left
circulation menu
3) Go to this page and confirm the data on this page are OK, and that
ui does behave as expected
4) Go to adminitration, columns setting, try to change the setting for
holdshistory table and confirm it is taken into account on holds history
page
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If someone decide the reuse the template->param statement to pass values
to the template, we will get the same issue.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the logged in patron does not have the necessary permission we should
not redirect to circulation.pl but moremember.pl instead
Test plan:
With the borrowers permission, you should be able to edit a patron and
be redirect to the moremember page
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Security bug, trivial changes, no need to provide procedure for script
kiddies.
Test plan:
Pay fines using the different options from the "Pay fines" tab.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Now that we have a check client-side, nothing prevents us from a smart guy to
bypass it and force an invalid password.
This patch adds two new subroutines to Koha::AuthUtils to check the
validity of passwords and generate a password server-side. It is used
only once (self-registration) but could be useful later.
Moreover the 3 different cases of password rejection (too leak, too
short, contains leading or trailing whitespaces) were not tested
everywhere. Now they are!
This patch makes things consistent everywhere and clean up some code.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Indeed if RequireStrongPassword is set we need at least 3 characters to
match 1 upper, 1 lower and 1 digit.
We could make things more complicated to allow minPasswordLength < 3
but, really, 3 is already too low...
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes a really ugly way to generate a password: the whole
template was sent and parsed to retrieve the "#defaultnewpassfield" node.
To avoid the password to be sent plain text it is certainly better to
generate it client-side.
The same kind of passwords will be generated: 0-9a-zA-Z
The while loop prevents to get an invalid generated password.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are other scripts where the borrower variable is not defined and
the fields are passed one by one.
To have a consistent behaviour we should add the title at the different
places.
Note that this script also add the use of the include file for
statistics.tt and remove the pass of parameters to the template, already
done later:
99 $template->param(%$borrower);
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Due to the way members-home.pl handles the variable $branch, the number
of patron modifications listed on members-home.pl may differ from the
number listed on mainpage.pl. When the librarian clicks this link, he or
she may see a different number than was listed, or none at all!
Test Plan:
0) Set IndependentBranchesPatronModifications = Yes
1) Create a number of modification request for BranchA
2) Log into the staff intranet with a patron without superlibrarian
permissions and set your branch to BranchB
3) Note the modifications alert to does not display on mainpage.pl
4) Click the "Patrons" link to take you to members-home.pl
5) Note the modifictions alert does display on this page
6) Apply this patch
7) Reload members-home.pl, note the alert no longer displays
QA notes: What was the point of the branch variable?
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The following warn is triggered when I click the Reverse button next to
an individual payment on the Account tab:
CGI::param called in list context from package
CGI::Compile::ROOT::home_vagrant_kohaclone_members_boraccount_2epl line
63, this can lead to vulnerabilities. See the warning in "Fetching the
value or values of a single named parameter" at /usr/share/perl5/CGI.pm
line 436.
To test:
1) Go to a members detail page in staff side, create a manual invoice,
pay it
2) Go to the Account tab, click Reverse next to the payment you just
made
3) Notice warns
4) Apply patch and repeat steps 1 & 2
5) Warns should be gone
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The following warns are triggered when I click the Pay selected button:
CGI::param called in list context from package
CGI::Compile::ROOT::home_vagrant_kohaclone_members_pay_2epl line 267,
this can lead to vulnerabilities. See the warning in "Fetching the
value or values of a single named parameter" at
usr/share/perl5/CGI.pm line 436.
CGI::param called in list context from package
CGI::Compile::ROOT::home_vagrant_kohaclone_members_pay_2epl line
273, this can lead to vulnerabilities. See the warning in "Fetching
the value or values of a single named parameter" at
/usr/share/perl5/CGI.pm line 436.
To test:
1) Go to a members detail page in staff side and create a manual
invoice
2) Go to the pay fines tab, select the fine you just created and click
Pay selected
3) Notice warns
4) Apply patch and repeat steps 1 & 2
5) Warns should be gone
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The following warns are triggered when I click the Write Off button next
to an individual fine or charge:
CGI::param called in list context from package
CGI::Compile::ROOT::home_vagrant_kohaclone_members_pay_2epl line 171,
this can lead to vulnerabilities. See the warning in "Fetching the
value or values of a single named parameter" at
/usr/share/perl5/CGI.pm line 436. (this shows many times)
Use of uninitialized value in subroutine entry at
/usr/share/perl5/URI/Escape.pm line 184.
To test:
1) Go to a members detail page in staff side and create a manual
invoice
2) Go to the pay fines tab, click the Write off button next to the
invoice you just created
3) Notice warns
4) Apply patch and repeat steps 1 & 2
5) Warns should be gone
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Go to a members detail page in staff client
2) Select the Fines tab in the left pane
3) Select the Create manual invoice tab below the button menu bar
4) Create a fine and click save (e.g. Type: Fine, Amount: 5.00)
5) Select the Pay fines tab below the button menu bar
6) Click Pay on the item
7) Blank the staff error log
8) click confirm
-- staff error log has message
9) apply this first patch
10) repeat steps 3-8
-- staff error log is blank
11) run koha qa test tools
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Problem: A patron category "I" would cause display problems
on the details in the intranet. This is because the templates
confused patron category "I" with patron type "I" (organisation).
Patch:
- Cleans up variable confusion between categorycode and
categorytype.
- The template contained code to change the labels below
the address to 'Organisational phone:" etc., I have removed
this part as it does not match the edit form anymore.
- Initials, date of birth and gender are still hidden for
organisation - matching the edit form.
Bonus:
- The patron category description was missing on the
right and left side of the details tab. Now it displays.
- Fixes some html issues:
- doubled up class attribute in a tag
- doubled up </li></li>
To test:
- Create 3 patrons
- patron category code doesn't matter, but category type organisation
- patron category code 'I', category type NOT organisation
- patron category code NOT I, category type NOT organisaton
- Check details tab in patron account in staff for all 3
- Verify patron category description shows correctly
- Verify information added to the account displays correctly
(phone numbers, emails, ...)
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The "Pay selected" option on the Fines tab in the borrower account page doesn't work as intended.
The fine on top of the list gets the amount deducted, even if another fine is choosen from the list.
Test Plan:
1) Create two or three fines, using the Create manual invoice function.
2) Choose one of the fines (not the one on the top) and click Pay selected
3) Pay a partial amount
4) Go back to the Pay fines tab an notice that the fine you selected has not changed. Instead, either the top fine or the total (see attachment) has ben affected.
5) Apply this patch
6) Repeat steps 1-3
7) Note the correct fine is paid
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Using the pay selected option from the borrowers account, to pay for one specific fine among other gives a 500 error, despite the payment going through.
Test Plan:
1) Add two fines using the Create manual invoice function.
2) Select one fine and "pay selected".
3) Pay a part of the amount.
4) Note error
5) Apply this patch
6) Repeat steps 1-3
7) No error!
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
1. Hit /cgi-bin/koha/members/moremember.pl?borrowernumber=xx<script>alert('amit')</script>.
xx - is a borrowernumber
2. Notice the java script is executed.
4. Apply patch.
5. Reload page, and hit the page again /cgi-bin/koha/members/moremember.pl?borrowernumber=xx<script>alert('amit')</script>.
xx - is a borrowernumber.
6. Notice it is no longer executed.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a recurrent bug we have over the last years. When a script is
called with non-existent borrowernumber it will crashes.
We need to handle this gracefully instead of letting the script crashes.
On bug 18403 a new subroutine is added to the codebase
(output_and_exit_if_error) to handle this kind of errors correctly.
Since it is not pushed yet, I propose to just redirect to a script that
handle it correctly (circulation.pl) instead of adding this message to
all these scripts.
Test plan:
Hit different scripts from the members module and pass a non-existent
borrowernumber.
You must be redirected to circulation.pl with a friendly message.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Restore datepicker class
Use Koha.Preference
Copy changes to moremember
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Look at intranet log
2) Go to delete a debarment on a borrower
3) Notice warn
4) Apply patch
5) Add a new debarment
6) Delete this debarment
7) Notice warn is gone
Sponsored-by: Catalyst IT
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replace the different calls to GetReservesFromBorrowernumber
with a calls to Koha::Patron->get_holds.
In some places we need to get a restricted set of holds, that's why we
process a search on this holds returned by ->get_holds (on the found
status for instance).
The changes are quite trivial and reading the diff should be enough to
catch bugs.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17737,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Resolve warning from members/summary-print.pl:
"my" variable $itemtype masks earlier declaration in same scope
Test if find returns a Koha object in GetDescription.
Test if find returns a Koha object too in shelves.pl. While testing, I had
a crash on a biblioitem with itemtype NULL (bad record, but these things
tend to happen somehow.)
Can't call method "imageurl" on an undefined value at virtualshelves/shelves.pl line 253.
Same for opac/opac-shelves.pl.
Note: Did not add tests everywhere but generally, I have the impression that
we do not sufficiently test on the results of Koha::Object->find. Mostly we
just assume that it will find a record. Several reports include fixes to
resolve that wrong assumption.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The C4::Koha::getitemtypeinfo subroutine did the almost same job as
GetItemTypes. On top of that it returned the imageurl value processed by
C4::Koha::getitemtypeimagelocation.
This value is only used from the 2 [opac-]shelves.pl scripts. Then it's
better not retrieve it only when we need it.
Test plan:
Play with the different scripts touched by this patch and focus on item
types. The same description as prior to this patch must be displayed.
Note that sometimes it is not the translated description which is
displayed, but that should be fixed on another bug report. Indeed we do
not expect this patch to change any behaviors.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch updates the existing occurrences of ->find called in a list
context.
There are certainly others that are not easy to catch with git grep.
Test plan:
Confirm that the 4 modified scripts still works as expected.
We need this one ASAP in master to make sure we will not get other
side-effects of this kind and to catch possible uncaught occurrences
before the release.
Tested scripts changed by this patch, they work as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Once again, after bug 16154 and bug 16259 we need to remove more
occurrence of CGi->param called in list context.
Refer to bug 15809 for more information.
Test plan:
Make sure you do not see the error on the modified scripts.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See bug 18552. When we resolved the housebound_role bug, the hash got
filled correctly again. And this revealed that the (second) call to
Koha::Patrons->find was not appropriate. It can be removed, as Jonathan
explained on the report.
Note: Commit 95429af685 added this call, but
it was hidden until the template variable hash got fixed.
Test plan:
Restart Plack and go to patron details again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Like:
Problem = a value of AutoResumeSuspendedHolds has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Problem = a value of relatives_borrowernumbers has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Problem is functions returning undef in list context (in this case
housebound_role).
No need to call Patrons::find a second time.
Note: The call of GetDebarments in the first patch suffered from this too.
It is in a fine place now too. But strictly speaking, should not have been
moved.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to a borrowers details page and create a manual restriction
2) Notice the restriction shows at the top of the page but the
restriction tab says the member is currently unrestricted
3) Apply patch and refresh page
4) Restrictions tab should now correctly show debarments and correct
number is shown
5) Confirming deleting and adding restrictions still works as expected
Sponsored-by: Catalyst IT
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
typo responsability
typo defautl in authorities.pref
typo reveived in t/db_dependent/Acquisition.t
typo ;; in advance_notices.pl
typo Stopping in restart_indexer (koha-indexer)
typo instutitional in moremember.pl
typo Corretly (Biblio.t)
typo periodicy in help serials
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Not the opac because we do not want the patron to modify it, they won't
be necessary translated.
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- minor changes on address format
- corrected member-password so that steetnumber is given to the template
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates the existing occurrences of ->find called in a list
context.
There are certainly others that are not easy to catch with git grep.
Test plan:
Confirm that the 4 modified scripts still works as expected.
We need this one ASAP in master to make sure we will not get other
side-effects of this kind and to catch possible uncaught occurrences
before the release.
Tested scripts changed by this patch, they work as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If they can have guarantors and we shwo the button on one page I think
we should in fact show it on all.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
