In the staff client we had still some remains referring to the
constraint types.
Also touched one comment line from SIP.
Test plan:
Add a hold in the staff client.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply this patch set
2) prove t/db_dependent/Circulation.t
3) prove t/db_dependent/Holds.t
4) prove t/db_dependent/Holds/LocalHoldsPriority.t
5) prove t/db_dependent/Holds/RevertWaitingStatus.t
6) prove t/db_dependent/HoldsQueue.t
7) prove t/db_dependent/Reserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
AMENDED: An else branch in reserve/placerequest.pl was removed. This had
the effect of making it no longer possible to place an any hold in the
staff client.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified placing a biblio level and an item level hold.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Ensure that the transit flag (in field CV) is set
if return message is 'wasTransfered'
CV is being set for other return conditions but not for
wasTransfered [sic] The presence of this flag is required to
route returns to the correct bin if the SC unit is so
enabled
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I agree with the solution to an issue I've already encountered and
patched localy that way. It would be nice to have a better doc of
C4::Circulation::AddReturn in order to see immediately that
WasTransfered is a valid feedback for a check-in.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that many librarians find it disconcerting to have no feedback
with the new checkouts table. It seems that many of them wait for it to
fully load, check to verify the item was checked out, and only then
check out the next item.
To help alleviate this issue, we can have the checkouts page give
feedback about the item that was just checked out.
Test Plan:
1) Apply this patch
2) Check an item out
3) Note the message "$title ($barcode) due on $date_due"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well and fixes a very problematic issue with the new AJAX
circ. I will be submitting a follow-up which I think is an improvement
to the display.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Implement correct handling of fees associated with checking out
an item.
This is associated with fee acknowledged field (BO)
To quote from the Sip2 document
" If this field is N in a Checkout message and there is a fee
associated with checking out the item, the ACS should tell the
SC in the Checkout Response that there is a fee, and refuse to
check out the item. If the SC and the patron then interact and the
patron agrees to pay the fee, this field will be set to Y on a second
Checkout message, indicating to the ACS that the patron has acknowledged
the fee and checkout of the item should not be refused just
because there is a fee associated with the item"
So there are two Checkout requests the first with BO not set to Y is
rejected but the fee amount is returned. The Second Checkout with BO set
to Y should succeed.
Added a debug log message indicating why we block a checkout
when we dont otherwise indicate
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For historical reasons the SIPServer and SIP modules
have used an extra module path in addition to the
standard Koha one. This has caused numerous irritants
in attempting to set up scripts and basic tests. It
does not help in attempting to modify or debug
this code
This patch changes the package value in the modules
under the C4/SIP directory and makes calls to
them use the full package name.
Where the export mechanism was being short circuited
routines have been explicitly exported and imported
declarations of 'use ILS' when that module was
not being used and which only generated warnings
have been removed.
As a lot of the changes affect lines where
an object is instantiated with new. The opportunity
has been taken to replace the ambiguous indirect
syntax with the preferred direct call
In intializing ILS the full path is added as this
will not require any changes to existing configs.
I suspect this feature is unused, and adds
obfuscation rather than flexibility but have kept
the feature as we need this change in order to
rationalize and extend the testing of the server.
The visible difference is that with the normal Koha
PERL5LIB setting. Compilation of Modules under C4/SIP
should be successful and not fail with unlocated modules,
allowing developers to see any perl warnings
All the SIP modules can now be run through the tests
in t/00-load.t now except for SIPServer itself
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the patron has amassed charges that block borrowing, but we
allow staff override the information that the patron cannot
issue should be included the patron information response
This patch sets the appropriate status fields in the patron object
It restores the fee_limit member to the patron object
and calls a local subroutine to set it.
This could be done more elegantly but that would require more
major refactoring of the rather messy initializer code
in ILS::Patron
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a patrons fines exceed noissuescharge and we allow
staff to allow issue at their discretion via an override
the SIP process allowed charges to go ahead.
This patch closes the loophole which allowed self issue
to subvert the usual library loan policy
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12041 made xt/author/podcorrectness.t consider files in the 'Koha' namespace.
Some of them where failing. This patch fixes some of those POD problems.
Best regards
To+
Test:
1) run prove xt/author/podcorrectness.t
it fails
2) apply patch
3) run again, now it's ok
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Before patch test fails. After it, it pass
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently Koha's SIP server ignores the return date part of an 09 ( aka
CHECKIN ) message. Koha should backdate a return, and remove
fines accordingly.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Works as notified, second date field in SIP checkin (return date) is
used as return date. Return shows up in history with correct date.
Comments:
- patron is fined if return date is before issue date, but that
is largely irrelevant anyway.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds support for recording in Koha accountlines a different accounttype
depending on how the fee was paid at the SIP2 station (cash, credit,
etc.)
Adds a new param to recordpayment(), $sip_paytype, which is appended to
the 'Pay' type if present. The payment description is also appended
with " (via SIP2)" if this is present.
In order for other scripts to keep working as expected, "eq 'Pay'"
needed to be replaced with a regex comparison "=~ /^Pay/", so that 'Pay'
and 'Pay-##' would continue to group together.
To test:
1. Make a payment over a SIP2 connection
2. Check the patron record in the staff client; you should see the
modified description
3. Attempt to print a invoice or a reciept for the borrower; the
payment should show up where expected
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's SIP2 server implementation does not currently support the SIP2
protocol field "media type" ( CK ).
This patch implements the SIP2 media type by allowing an arbitrary
mapping of itemtypes to SIP2 media types.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Edit an itemtype, select a SIP media type, and save the changes
4) Make a SIP2 Item Information Request
5) Verify that the CK field of the Item Information Response contains
the correct media type code.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a patron has a record-level hold that is unavailable, any patron
information request will send back an empty CD field when this field
should have an item barcode in it [RM note: this actually isn't
universally true -- the SIP2 standard is silent as to what is supposed
to go in the CD field. Some SIP2 devices do indeed want an item
barcode, but others are known to just want a display of the title
and author of the request in question. Providing an option is the
topic of a new enhancement request, however.]
This is due to a minor error in ILS::Patron::_get_outstanding_holds
where GetItemnumbersForBiblio is assumed to return an array but in
reality returns an arrayref.
Test Plan:
1) Create a record level hold for a patron and record
2) Using SIP2, make a patron information request
3) Note the empty CD fields
4) Apply this patch, restart SIP server
5) Repeat step 2
6) Note the CD field now has a barcode
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test this patch but the following code shows me it is correct:
use C4::Items;
use Data::Dumper;
my $biblionumber = 5035;
my $itemnumber = (GetItemnumbersForBiblio($biblionumber))[0];
say Dumper $itemnumber;
$itemnumber = (GetItemnumbersForBiblio($biblionumber))->[0];
say Dumper $itemnumber;
displays:
$VAR1 = [
'23168',
'23169',
'23170',
'23171',
'23172'
];
$VAR1 = '23168';
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The system preference 'maxoutstanding' is defined as the maximum amount
of fees owed by the patron before Koha should block placing holds (
terrible naming on this one ).
However, although the Koha OPAC respects this preference, placing holds
via a SIP2 device will not.
Test Plan:
1) Set maxoutstanding to $10
2) Pick a patron owning more than $10 in fees
3) Attempt to place a hold for this patron from a SIP2 device
This attempt should succeed
4) Apply this patch
5) Restart your SIP2 server
6) Attempt to place a hold for this patron from a SIP2 device again
This attempt should now fail
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test:
* SIP: Have an old user and create a new user
- use either tenet sip test or
C4/SIP/interactive_patron_check_password.pl to check old
userid/password
- do the same for the new user
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described
Test
1) using perl C4/SIP/interactive_patron_check_password.pl
can check current (short) and new (long) passwords
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When requested by the summary flags the sipserver
should return in the patron info response barcodes of
the relevant titles.
For available holds this is the barcode of the captured items.
For unavailable holds ( i.e. current unsatisfied holds ),
we need to send a barcode so that the unit can use this to
request the title info. The barcode could be any one
belonging to the title.
This patch also corrects the erroneous return of empty items
in the patron information response. If the unit supplies a
range 1 - 100 unless the title has a hundred or more copies the
unit expects all copies. The server was erroneously stuffing
the returned arrays with null copies so that all summary requests
returned 100 copies (mainly without barcodes)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes:
Using the test script provided on the bug report, but changed it
to match sip user and patron existing in my database.
Before applying the patch the SIP responses show the behaviour
pointed out above regarding the 100 items. After applying the
patch and restarting the SIP server responses are much more clean
not returning empty IDs.
64 Patron information response
AS = hold items
hold items count is correct.
AS contains barcodes of waiting holds.
Before patch, all AS were empty.
AT = overdue items
overdue items count is correct.
AT contains barcodes of overdue items.
AU = charged items
charged items count is correct.
AU contains barcodes of charged items.
AV = fine items
Judging from behaviour seen and comment in
Patrons.pm currently not implemented.
BU = recall items
Recalls are not implemented in Koha yet.
CD = unavailable hold items
unavailable items count is correct.
CD contains barcode for item level holds and is empty
for title level holds where no item can be determined.
Before patch, all CD were empty.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- fix identation in one line
- remove a commented-out warn
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The debarred status in DB switched from a boolean to a date.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Correctly pulls debared flag instead of debarment date.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Expansion of Liz Rea's original patch
Bug report specifically mentioned lack of the
Zip/Postal code but all used address fields should
be included. Moved the address
generation to its own sub.
Hopefully using an if else will read more clearly than
the original ternary operator proved to be
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
All the modules in the SIP/ILS tree are objects
The addition of calls to Exporter or hand manipulation of
@ISA added unnecessary bloat
Removed the "self = shift or return" idiom as it is nonsensical
if the method can only be called via an object.
standardized inheritance via use parent
added a $self = shift in a couple of places where it
was not strictly necessary as its absence seemed to have
misled readers in the past
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebase and merge based on Mark Gavillet's patch to reduce
the loan period given to items on renewal when they are
in high demand for holds
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Renewals were being rejected for incorrect reasons
Checking was being done against the wrong object
Add more informative messages on failure
Correctly set due_date for renewal response
Avoid crashing the SIPServer because it handles RenewAll
incorrectly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Add C4/SIP to perlcritic tests. Fix those issues that were
generating perlcritic errors
Signed-off-by: Stacey Walker <stacey@catalyst-eu.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If a discharged item is captured for a hold at another branch
the selfcheck should generate a branchtransfer for it.
This was complicated as the checkin routine was setting its own
location from a field not set in many scm machines (e.g. 3M)
also in ILS::Transaction the test for location was incorrect
assuming that an empty string or undefined was a valid location
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Shelf Check was receiving messages saying item was wanted
for a hold but the item was discharged to the shelf
not associated with the hold or transited to
the pickup location. The message was also being sent
on discharge of items when a suitable item had already
been captured.
Checkin now associates the item with the hold and sets
the appropriate data for a correct checkin response
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Explicitly clear these arrays and update them directly.
In practice item numbers were already in them when called
so that more items were being returned than were actually
renewed (or failed)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Functionally sound patch, and tested in production
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Observe AllowItemsOnHandCheckout syspref when using SIP self checkout
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
To test:
* place an item on hold for patron A
* attempt to circulate that item to patron B (via SIP/selfcheck)
syspref off: item should not circulate to patron B
Syspref On: item should circulate to patron B
Both conditions passed in our testing.
Also verified that normal staff client behavior regarding this situation was preserved. It was.
Corrects typo in list of flags; was DEBARRED, but the actual name of the flag is
DBARRED (for some reason)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Allow fee paid to be supported for those machines which handle it
Development Sponsered by Halton Borough Council
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
item duedate is not a datetime entity but a string retrieved
direct from the db that only needs restructuring
checkout was doing so but item_info was pretending it was in secs
(actually Item.pm manipulated then overwrote it!!)
assume the date in the db is correct (otherwise madness ensues)
dont try to second guess it
As duedates do not yet include a time element assume end of day
as a safety first
[F. Demians] I confirm Joe Atzberger diagnostic. That's a bug reported by a
library. I've tested Colin Campell solution. It fixes the bug.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
working through the master branch to eliminate all
podchecker warnings/errors
Actual improvement to the quality of the POD will
come later (hopefully with assistance of others)
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Using Flag EXPIRED to notice whether Patron CAN or CANNOT checkout a book
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Although the due date of an on loan item was being retrieved
the appropriate field in the Item object was not set
causing the due date not to be returned in the item
information response
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Fixed two calls where new interface was not used
Arguably new syntax allows more options than we require but it was not catching
error cases (when 0 or undef is passed). It also can now be called in ways
which would validly return multiple hits but explicitly does not
(nor does calling code expect this)
This patch should quieten the flood of errors
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
