Description:
A new pref ConfirmFutureHolds is added. When confirming a hold at checkin time,
the number of days in this pref is taken into account when looking for reserves.
Note that this pref does not interfere with renewing, issuing or transferring
a book. For report Holds to pull, the default end date is calculated with this
new preference.
The use of ConfirmFutureHolds is useful only when future holds are allowed.
Test plan:
1) Enable future holds. Add a number of days into ConfirmFutureHolds.
2) Place a future hold within this number of days.
3) Run holds to pull report. Check default startdate and enddate.
4) Check this book in. Can you confirm the hold? Do not confirm.
5) Issue the book to another patron. You should not see a warning.
6) Renew the book for this patron via opac or staff. No warning either.
7) Check in again. Warning pops up again.
8) Transfer book. Switch branch. Check in. Hold found pops up. Do not confirm.
9) Back to first branch. Check in (with popup). Remove the hold. Add new future
hold past the number of days. Check in (no warn).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show any relevant results from the OverDrive ebook/audiobook service
on the OPAC search. This is done by showing a link with "Found xx
results in the library's OverDrive collection" at the top of search
results and linking to a page that shows the full results.
This requires an OverDrive developer account, and is enabled by
setting the OverDriveClientKey and OverDriveClientSecret
system preferences. In addition, this patch adds the
OverDriveLibraryID system preference.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The descriptions for OPACBaseURL and staffClientBaseURL are not explicit
about including a trailing slash or not. This patch makes it explicit
that the trailing slash should *not* be included.
To test:
- Apply the patch
- Search for "baseurl" in the system preferences
- Check that the description of both sysprefs includes a warning about
not including a trailing slash.
- Sign off
If you want to check that the trailing slash is in fact superfluous you
can do something like 'grep -r "BaseURL" *' and check that these
sysprefs are usually concatenated with some string that starts with a
slash.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes to the description appear correctly on both system
preferences.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When issuing a book, some libraries want to issue by title or other details.
This patch adds a systempreference and code that allows it.
To test:
1) scan a patron card or enter a surname to start checking out;
2) enter title or other keywords;
3) the circulation screen should display a warning allowing to choose between copies.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a new system preference AllowTooManyOverride to control whether
a librarian can override the 'Too many checked out' message which is
currently always overridable.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Attempt to check out 1 more item to a patron than the max issues
4) You should be allowed to override by default ( current behavior )
5) Set AllowTooManyOverride to "Don't allow"
6) Repeat step 3
7) You should be blocked from being able to issue the item
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The new system preference is activated by default, which mean there
will be no change in behaviour on update.
The system preference is correctly added to the database and .pref
files.
Test plan and QA script passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some vendors ship materials from the same invoice in multiple packages.
In those cases, it would be good to notify the librarian when they enter
a duplicate invoice number, so that they can continue receiving on the
previously-created invoice, rather than creating an invoice with a
duplicate number.
To test:
1) Apply patch and run database update.
2) Make sure that you have created at least one invoice on
acqui/parcels.pl and take note of the invoice number.
3) Try to create an invoice with the same invoice number.
4) Note that without changing your configuration this works exactly
the same as before.
5) Turn on the AcqWarnOnDuplicateInvoice system preference.
6) Try to create a new invoice with the same number as the one you
noted earlier.
7) Make sure you get a warning about a duplicate invoice.
8) Choose to receive on the existing invoice.
9) Confirm that you are receiving on said existing invoice.
10) Start the receiving process over, and this time choose "Create new
invoice anyway."
11) Confirm that you are now receiving on a new invoice.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
I have followed the test plan, but also checked some more things:
- Checking the duplicate check works when you have the entered
invoice number in your database multiple times already.
- Checking that no duplicate message is shown if you enter the
invoice number and it's already been used for an invoice from
another vendor.
Looks all good. I think the only thing we could argue about here
is if this could be activated by default for new installations.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As QA followup on report 9722. Built on top of another followup report 10321.
Test plan:
Run the db revision included in the other patch.
Enable OpacHoldNotes. Check that you can add a hold note on opac-reserve.
Do you see it on opac-user and in staff on catalog detail of that biblio?
Do a grep on ShowHoldNotes on the Koha code: grep -i ignores case. You should
find three occurrences only in updatedatabase.pl (the old dbrev and this dbrev
renaming them). These are fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Other system preferences which require entry of database column names
include a link to the scheme for reference. The UniqueItemFields should
do the same. This patch rewords the preference description to
incorporate a link.
To test, open the acquisitions tab in system preferences and confirm
that the UniqueItemFields description looks correct and links to the
right page in the schema.
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On by default.
To Test
1/ Create an overdue item, that should get fines
2/ Return the item
3/ Check the borrowers record to see if the fine has been added/updated
Apply patch
1/ Make sure preference is set to do
Repeat steps 1-3 above
2/ Switch the preference to don't
Repeat stes 1-2
3/ Check the fine hasn't been added/updated
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass, works as described.
I would categorize this a bug fix for libraries that don't want
the new changed behaviour that was introduced by recalculating
fines on return.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Allow a relative path (within theme/css) in intranetstylesheet too.
Allow a full path, local or remote with http(s), in intranetcolorstylesheet.
This restores consistency between opac and staff.
Test plan:
First: the patch with the db revision should have been applied. And also the
updatestructure step from the web installer should have been run.
Clear intranetstylesheet. Check included stylesheet with page source in browser.
Enter a full path with http or / in intranetstylesheet. Check again.
Enter a relative path (such as staff-global.css). Check again.
Clear intranetcolorstylesheet. Check if there is no reference with page source.
Enter a full path with http or / in intranetcolorstylesheet. Check reference.
Enter a relative path (such as blue.css). Check again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The option of adding a note is controlled by new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
1 Verify if new pref is disabled by default. Place a hold. You can't add a note.
2 Enable the pref. Place a hold and add a note. Check in staff if you can see
the note in Catalogue Detail/Holds tab.
3 Toggle SingleBranchmode, AllowHoldDateInFuture/OPACAllowHoldDateInFuture,
OPACShowHoldQueueDetails, or OPACItemHolds.
Check the display of columns when placing a hold from opac.
4 Place a few holds with notes from opac search results in one run (enable
DisplayMultiPlaceHold). Check results in staff again.
Remark: A few lines already refer to mandatory note reasons. This is handled
in a subsequent report. No reason to worry.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
This feature enables a particular library's items to be emphasized and moved
to the first position on the search results and details pages of the OPAC.
It is enabled by the sytem preference HighlightOwnItemsOnOPAC.
To choose which branches items are emphasized, use the system preference
HighlightOwnItemsOnOPACWhich. It has two modes.
If set to PatronBranch, the items emphasized will be those of the same
library as the patron's library. If no one is logged into the opac, no
items will be highlighted.
If set to OpacURLBranch, the library is chosen based on the Apache
environment variable BRANCHCODE.
For example, this could be added to the OPAC section of koha-httpd.conf:
SetEnv BRANCHCODE "CPL"
The point of this feature is to allow each library on a given Koha server
to have a specific subdomain for the opac where that library's items are
empasized. That was http://branch1.opac.mylibrary.org will emphasize the
items of branch1, while http://branch2.opac.mylibrary.org will emphasize
the items of branch2.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Implements the material type icons shown in the MARC21 XSLT result list
of the OPAC for the intrant result list.
Also adds the system preference DisplayIconsXSLT as an intranet analogue
for the OPAC system preference DisplayOPACiconsXSLT and corrects the
descriptions of both preferences in the syspref editor.
To test:
0) Run database update to add new system preference
1) Activate default XSLTResultsDisplay
2) Check the new system preference DisplayIconsXSLT shows up correctly
and is activated by default. Compare descriptions between DisplayIconsXSLT
and DisplayOPACiconsXSLT.
3) Check the intranet result list for icons showing up after 'Type:' and
before the corresponding description. Detail pages should be showing
the 'Type:' as before.
4) Turn off DisplayIconsXSLT.
5) Check the line containing 'Type:', format and audience information is now
hidden from the result list.
6) Check that the 'Type:'line is also hidden from the detail page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch modifies Koha::DateUtils::output_pref to support the new system preference TimeFormat, which defines the visual format for a time as either the 24 hour format ( default ), or the 12 hour format (HH:MM AM/PM).
The patch also modifies C4::Members::IssueSlip to use output_pref rather than format_date.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Issue an item to a patron, verify the times are in 24 hour format.
4) Switch TimeFormat to the 12 hour format.
5) Revisit the patron record you issued an item to, times should now be in a 12 hour format.
6) Print a slip for this patron, you should now see the time as well as the date.
Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests after fixing the test count in t/DateUtils.t.
Fixed conflicts in syspref.sql and updatedatabase.pl.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
As we have another sign-off on this now I gave it a quick
run through and it works as expected.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes 'insecure' system preference.
Also removes remaining code that make use of
the preference. It's broken anyway.
Only remains a reference in POD of C4/Boolean.pm
To test:
1) If you like, enable 'insecure' syspref. Broken system.
WARN: be prepared to revert value in database.
2) Apply the patch
3) Run updatedatabase.pl
4) Check that Staff login proceeds as usual.
5) Check that 'insecure' syspref is no more.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove 2 occurrences of insecure (in comment only)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In UNIMARC installations the authors have a double comma separating the subfield a and the subfield b.
Test plan:
- After applying the patch do a search and check the double comma in authors facets.
- Apply the patch
- Do a new search
- Check if authors facets as a double comma
Sponsored-by: KEEP SOLUTIONS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the system preference FinesIncludeGracePeriod which
allows the library the choice to include the grace period when calculating
a fine ( Koha's current behavior ) or to ignore the grace period for
the purposes of fines calculation. It is set by default to preserve the
current behavior.
Signed-off-by: Srikanth Dhondi <srikanth@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Rebased March 8, 2013. Included renaming pref.
Works as advertised. Renamed the bug title and opened a new report for the
original bug.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In light of the experimental nature of the QueryParser code at this
juncture, it behooves Koha to have the option of disabling QP, at least
for the purpose of comparing results between QP-enabled and QP-disabled
searches. This patch adds a UseQueryParser syspref to do just that. In
cases where the user enables QP without having QP installed, however,
there will be no dramatic failure, and Koha will simply fall back to
using the non-QP search code.
In order to reduce the overhead added by the introduction of QueryParser,
this patch adds a C4::Context->queryparser accessor to a static
QueryParser object which is initialized the first time it is required
and then reset thereafter.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Fixed merge conflict in sysprefs.sql and updatedatabase.sql
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed merge conflict in sysprefs.sql und updatedatabase.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The patron self registration system references a system preference
PatronSelfRegistrationAdditionalInstructions as a free text field
to add additional instructions for newly self registered patrons,
but the system preference in neither created in the database,
nor exposed via the staff interface.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Add some text to the new system preference
PatronSelfRegistrationAdditionalInstructions
4) Enable opac self registrations and complete a self registration
5) Note the additional instructions you entered appear on the
"registration complete" page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Add all fine actions to action_logs via FinesLog syspref
Test Plan:
1) Enable FinesLog
2) Apply patch
3) Try all the various fine related actions possible
4) Verify that each action creates an action_logs entry
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
* Don't show the Location line if there are no copies available, since it
will inevitably be blank
* Also, don't show locations for Checked Out, Lost, Damaged, Withdrawn,
On Hold or In transit items; it doesn't really make sense, since the
items aren't actually there, and it results in repetitive listing of
the shelving location
* Added system preference to display shelving location of an item on opac
results. The system preference is called OpacItemLocation. I also moved
the call number to a new line called Location along with the shelving
location if it is enabled.
To Test:
1) Run database update script to add syspref.
2) Set OpacItemLocation to show locations or collection codes on the
opac-search page.
If it is working you should see the shelving location of the item
before the call number. Multiple home branch shelving locations
are seperated by a pipe character ( i.e. '|' ).
Based on code by Elliot Davis <tdavis@uttyler.edu>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as advertised.
Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Working on Mozilla Persona support (browser id)
This will let a user log into Koha using browser id, if their email
address used matches the email address inside Koha.
Once an assertion is received, we simply need to find the user that
matches that email address, and create a session for them.
opac/svc/login handles this part.
The nice thing about it is, the user doesn't have to do anything, like
linking their account. As long as the email address they are using to
identify themselves in browserid is the same as the one in Koha it
will just work.
This is covered by a systempreference, to allow people to do it, and
is of course totally opt in, it works alongside normal Koha (or any
other method) of login. So only those choosing to use it, need use it
Test Plan
1/ Make sure OPACBaseURL is set correctly
2/ Switch on the Persona syspref
3/ Make a borrower (or edit one) to have the email you plan to use as
the primary email
4/ Click sign in with email, make or use a persona account
5/ Logout
6/ Check you can still login and logout the normal way
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works great.
It's not browser dependent, but tested with chrome, firefox, opera and safari.
Old an new login system works.
Minor errors, addresed in follow-up.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added for trivial string change in finalizing QA.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
New syspref OPACPopupAuthorsSearch.
If it is disabled, the development has no effect.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Forget to add the system preference to the template.
Signed-off-by: Rolando Isodoro <rolando.isidoro@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
New Authority system preference created UNIMARCAuthorityField100 with default value "afrey50 ba0".
AuthoritiesMarc.pm uses the system preference instead of label "afrey50 ba0".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, all tests and QA script pass.
1) Check system preference is created correctly.
2) Change pref.
3) Catalog a new authority.
4) Change framework to make 100 show in frameworks or check in the
the database, that now 100 has the new defined value.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This problem happens because there isn't a operator "phr" in the values
of callnumber and standard number search. So many results aren't the
corrects ones.
Test plan:
- Apply the patch
- In the dropbox search menu of OPAC main page header, the callnum
should have only callnum
- In OPAC advanced search the callnumber and standard number options
shouldn't have "phr"
- In staff client advanced search the callnumber and standard number
options shouldn't have "phr"
- Change OPACNumbersPreferPhrase and IntranetNumbersPreferPhrase to "use"
- The options listed before should use now the operator "phr"
- This will resolve the problems with the searches of callnumbers and
standard numbers in OPAC and staff client (spaces problems, no
results, inconsistent results, etc...)
Sponsored-by: KEEP SOLUTIONS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I don't know how to reproduce the searching problems described in the
bug, but I can confirm that the patch works correctly to enable/disable
the use of 'phr' in the searches described in the test plan.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
System preferences work as described, switching indexes in
OPAC and staff.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the following enhanced content to the OPAC, all controlled by
separate sysprefs:
1) A "Readometer" which summarizes reviews on the OPAC detail page
2) A tab with snippets of critical reviews on the OPAC detail page
3) A computed rating on the results page
To test:
Find a book that is listed on IDreamBooks.com (you may have to make
sure that you have the first edition), and one that is not. Try
each of IDreamBooksReadometer, IDreamBooksReviews, and
IDreamBooksResults sysprefs, taking note of the content appearing (or
not) as appropriate.
Updated to add missing CSS to new theme.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased to latest master 2012-12-31
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added RentalsInNoissueCharges and ManInvlsInNoissueCharges sys prefs
Created C4::Members::cwGetMemberAccountBallance()
* A wrapper for GetMemberAccountRecords that gives info on non-issue and
other charges
* Other charges are:
'Res'
'Rent' if RentalsInNoissueCharges is Mo
authorised_values MANUAL_INV if ManInvlsInNoissueCharges is No
C4::Members::GetMemberAccountRecords() changes:
* Dropped input param $date, it is not used
Use split charges in C4::Circulation::CanBookBeIssued() and
C4::Members::patronflags(). That way only fines decide whether an item
can be issued, and not other non-fine charges
Signed-off-by: Marc Veron <veron@veron.ch>
Rebased (updatedatabase.pl)
ManInvInNoissueCharges and RentalsInNoissueCharges ar both included by default (= behaviour as before)
All variants tested: Both included, none included, manual invoice included, rentals included.
Works fine, blocks/does not blok as appropirate, messages appear as expected.
[Oct 12, 2012 marcelr:] Amended for updatedatabase.pl
Signed-off-by: M. de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Patch updates the text of the SeparateHoldings and OpacSeparateHoldings
preference descriptions to be more readable.
To test, apply the patch and check the text of the preferences.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Description and test plan added.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Add system preferences SCOUserCSS and SCOUserJS to define separate CSS and JavaScript for the Self Checkout Module.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Add something arbitrary to the new sysprefs SCOUserCSS and SCOUserJS ( such as TestCSS and TestJS ).
4) Load the SCO module in a browser, and view the HTML, verify the CSS and JS values in the system preferences have been included.
Signed-off-by: Marc Veron <veron@veron.ch>
I tested with an alert('hello') as JavaScript and some background-color for the CSS. Worked as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a new system preference to control the fields to not appear in the separator.
Change GetMarcNotes to use the system preference created to only appear the fields that aren't in the list,
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
FIX some indentation in C4/Biblio.pm
+FIX 1 end of parentheses in sysprefs.sql
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preference to turn on/off this feature.
By default the system allow the patron to place holds even if it is in his possession.
Script to place holds check if the system preference is off and if patron has at least one item to block holds.
Messages to say that are already in patron possession added to templates.
Method to check if patron has one issue from one record added to C4::Circulation
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This enhancement uses information from MARC field 856 to generate the appropriate HTML5 code to embed am media player for the file(s) in a tab in the OPAC and staff client detail view. This patch supports the HTML5 <audio> and <video> element. Additionally it gives basic support for the <track> element. This element is not supported very well by recent browsers. Please consider the patch working when you get working video or audio.
Rebased to Master 22.11.2012
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When search failed, this patch gets the keyword(s) and add them
to the string entered by the user to OPACNoResultFound
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preferences (RenewalSendNotice - default no) to controll the renewal notice sending.
Added to installer languages the renewal notice template.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The 2 sysprefs are SeparateHoldingsBranch and OpacSeparateHoldingsBranch
and permit to chose between home branch and holding branch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Two tabs: "<branch> holdings" / "Other holdings"
"<branch> holdings" tab contains items whose homebranch is the current branch.
"Other holdings" tab contains all other items.
If current branch is not set (connected with mysql user or not logged in
(opac)), the display is unchanged (1 tab "Holdings")
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Right now when you return an item that was lost the patron's card is
credited with the lost fee, but not all libraries refund lost fees
and sometimes the fee is refunded after the patron has paid for it,
causing all kinds of financial issues.
Adds the syspref RefundLostItemFeeOnReturn to control whether
returning a lost item refunds the fee charged for losing that
item. Enabled by default to maintain Koha's current functionality.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
