memcached address and namespace are in $KOHA_CONF, so it is required to
read it before being able to access the cache. And after that,
configuration is kept in memory forever. Storing this in memcached is
useless and even counter-productive, since Koha reads both the file and
the cache
This patch addresses this issue by removing the cache-related code from
C4::Context->new.
It means that C4::Context->new will always read the configuration file,
so this patch also replaces inappropriate calls to
C4::Context->new->config by appropriate calls to C4::Context->config
It also fixes a bug where C4::Context->new would ignore the filepath
given in parameters if there was something in cache.
It also removes a problematic call to Koha::Caches->get_instance.
Because this call was outside of any subroutine, it would have happened
before the initialization of $C4::Context::context (which happen in
C4::Context::import)
Test plan:
1. Do not apply the patch yet
2. Add the following line at the beginning of Koha::Config::read_from_file
warn "read_from_file($file)";
This will allow you to check how many times the file is read.
3. Flush memcached and restart starman
4. Check the logs, you should see "read_from_file" a bunch of times
5. Apply the patch
6. Re-add the line from step 2
7. Flush memcached and restart starman
8. Check the logs, you should see "read_from_file" only once
9. Make sure the memcached config from $KOHA_CONF (memcached_servers,
memcached_namespace) is taken into account by checking the About page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our definition files are missing { additionalProperties: false }
We must have it to make sure all properties are defined and prevent the
spec to accept extra parameters (being more strict but also allowing to
catch errors more easily)
grep -rL additionalProperties api/v1/swagger/definitions/*.json
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The code seems to work either way
We have a mix in our code:
git grep "}) %]"
Using '=>' over '=' does look nicer
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Template plugin CirculationRules.Search returns "" if a rule doesn't
exist or if the rule exists but is set to ""
To get more info, we add a 'want_rule' parameter and use that to test
if defined but blank
To test:
1 - In circulation rules set the 'Default checkout, hold and return
policy' without setting values
2 - Unset it
3 - Notice there is no visual difference
4 - Apply patch
5 - Reload the page
6 - note there is no 'Unset button' and first column says 'Not set'
7 - Save the rule with no values
8 - Now 'Defaults' is displayed and the unset button exists
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For each subfield added, we check if other subfields exists in the same
field. If that's the case we use the same tab as the first subfield
found.
Test plan:
1. Find a biblio subfield in
misc/migration_tools/ifla/data/biblio/default.yml that doesn't exist
in your default biblio MARC framework (or delete one). The field
should exist and have other subfields with a tab set.
2. Change the tab of all subfields within that field it's different from
what's in the .yml file
3. Run misc/migration_tools/ifla/update.pl
4. Verify that the subfield has been added and have the same tab as
others subfields
5. Do the same for authorities (files are in
misc/migration_tools/ifla/data/auth/)
Signed-off-by: Koha team <koha@univ-lyon.fr>
Signed-off-by: sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Find a biblio subfield in
misc/migration_tools/ifla/data/biblio/default.yml that you have in
your default biblio MARC framework (or create one).
2. Change the tab of this subfield so that it's different from what's in
the .yml file
3. Run misc/migration_tools/ifla/update.pl --force
4. Verify that the tab of this subfield has not been changed.
5. Do the same for authorities (files are in
misc/migration_tools/ifla/data/auth/)
Signed-off-by: sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the PayPal payments feature. It has been moved to
its' own plugin.
To test:
1. Apply this patches
2. Run:
$ updatedatabase
=> SUCCESS: Database updates correctly
3. Run:
$ koha-mysql kohadev
> SELECT * FROM systempreferences WHERE variable LIKE 'paypal';
=> SUCCESS: No results
4. On the sysprefs, OPAC section
=> SUCCESS: No PayPal-related sysprefs show up
5. Add some charges to your patron
6. In the OPAC, log in and see your charges
=> SUCCESS: Nothing broken
7. Install the PayPal plugin [1] or any other payment plugin
8. Restart plack (mandatory for the PayPal plugin)
9. Set some random data in the config (or better, real sandbox testing
data)
10. Go to the OPAC's account page and try to pay your debts (use the
checkbox to select lines)
=> SUCCESS: The PayPal payment method shows, you can click the button,
it fails due to bad config, but things work as expected.
11. Sign off :-D
[1] https://gitlab.com/thekesolutions/plugins/koha-plugin-pay-via-paypal/-/releases
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We had two problems in the LangInstaller.pm module:
1) the PO file was read as bytes instead of as a UTF-8 text stream
2) The YAML file being outputted was double encoded, once by setting
the file handle to output UTF-8 and other time in the DumpFile
function internally
To test:
1. Before applying patch do the following
$ cd misc/translator
$ ./translate update pl-PL
$ ./translate install pl-PL
$ cd -
$ less installer/data/mysql/pl-PL/marcflavour/marc21/mandatory/authorities_normal_marc21.yml
2. Notice the output of the authorities_normal_marc21.yml contains
invalid looking UTF-8 characters
3. $ git clean -d -f # to remove the old translation files
4. Apply patch and repeat the steps and notice the
authorities_normal_marc21.yml contains valid looking UTF-8 characters
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The YAML::XS::Load and YAML::XS::LoadFile functions already decode the
YAML to Perl objects/strings, therefore decoding the output yet
another time is not needed and causes an error to happen.
To test:
1. Go through the following steps and notice without this patch the
error happens and with this patch it doesn't:
$ koha-mysql kohadev < installer/data/mysql/kohastructure.sql
$ restart_all
$ ./translate update pl-PL
$ ./translate install pl-PL
$ restart_all
--> Go to the Koha web installer page and select pl-PL as the installer
language, click through it and notice it gives following error at the
MARC21 step:
Cannot decode string with wide characters at /usr/lib/x86_64-linux-gnu/perl/5.24/Encode.pm line 202
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
And check if writeText is available.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a link to the display of publicly-accessible uploads so
that the user can copy the public link. This will hopefully lead to
easier use of sound file uploads in the Audio Alerts system.
To test, apply the patch and go to Tools -> Upload.
- If necessary, upload a file with the "Allow public downloads"
checkbox checked.
- Upon upload you should be shown the results of your upload in a table
with the file details.
- In the "Public" column you should see that "Yes" is a link.
- When you hover your mouse over the link you should see a tooltip,
"Copy link to this file."
- When you click the link the tooltip should say "Link copied to the
clipboard."
- Verify that the correct link has been copied.
- Test uploading a file which is not publicly-accessible.
- Confirm that the information in the "Public" column says "No" and is
not a link.
Signed-off-by: David Nind <david@davidnind.com>
Bug 27594: (QA follow-up): Use clipboard API
While the Clipboard API doesn't
have 100% coverage (https://www.caniuse.com/?search=clipboard), it has
enough coverage for the "copy" operation that it can be counted on for
use in the staff interface.
This patch removes the global copyToClipboard function and replaces it
with a call to ndavigator.clipboard.writeText() in the template.
To test, follow the previous test plan and confirm that the public
download link is still copied correctly to the clipboard.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is important for proquest ordering to distinguish types of
material.
FTX segment from quote is stored as vendor note.
Contents of vendornote are included in the order FTX segment.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Without the patch:
$ hyperfine --warmup 1 \
'perl -MKoha::Config -e "Koha::Config->read_from_file(\$ENV{KOHA_CONF}) for (1..1000)"'
Time (mean ± σ): 3.585 s ± 0.018 s [User: 3.531 s, System: 0.049 s]
Range (min … max): 3.547 s … 3.612 s 10 runs
- With the patch:
$ hyperfine --warmup 1 \
'perl -MKoha::Config -e "Koha::Config->read_from_file(\$ENV{KOHA_CONF}) for (1..1000)"'
Time (mean ± σ): 1.122 s ± 0.028 s [User: 1.104 s, System: 0.014 s]
Range (min … max): 1.095 s … 1.189 s 10 runs
Test plan:
1. Apply the first patch (the one with the unit tests) and make sure
tests pass: `prove t/Koha/Config.t`
2. Apply the rest of the patches and verify that tests still pass:
`prove t/Koha/Config.t`.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Includes the following optimizations:
- Use next biblionumber instead of large offset in the queries.
- Use unions instead of subqueries
- Avoid fetching item timestamps when items are not included.
Test plan:
1. Without the patch, try harvesting a Koha database with (and without for good measure) `include_items: 1` in the OAI-PMH configuration file pointed to by preference OAI-PMH:ConfFile and take note of performance. For useful metrics the database must be large enough to not fit in InnoDB buffers or OS file cache.
2. Apply the patch.
3. Run tests: prove -v t/db_dependent/OAI
4. Try again the harvesting from step 1 and compare performance with step 1.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Letters.t tests failed since time_queued didn't
include timecode. Use DATETIME when inserting
into message_queue.
To test prove t/db_dependent/Letters.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds error codes for delivery notes and replaces English
strings with them in template.
To test confirm everything works as intended.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Delivery notes weren't translatable. This patch adds
them in notices.tt. If note is Mail::Sendmail error generic
'Error occured while sending email' is shown.
Also fixes MySQLisms and adds AFTER to atomicupdate file.
To test prove t/db_dependent/Letters.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds additional delivery notes to messages in message queue as there
can be multiple reasons for a delivery to fail.
Currently in message_queue we are given only two delivery statuses for messages,
"sent" and "failed". When the status becomes failed, we have no idea why it fails.
This feature can be useful with SMS gateway providers. Many SMS gateways inform
the application the reason of SMS delivery failure. With this feature, this
information can now be stored. As well as for emails, instead of simply logging
failures, we can now store the reason of failure directly into the message row
of message_queue.
Test plan:
1. Enable EnhancedMessagingPreferences syspref
2. Find a borrower with notices at members/notices.pl
3. Observe that there is no column for Delivery notes
4. Apply patch and run the given database update
5. Repeat step 1.
6. Observe that there is now a column for Delivery notes
Sponsored-by: Hypernova Oy
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
before this patch, the limit only applies to groups of libraries
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Syspref is now called SearchLimitLibrary, and the description better
explains what the feature does. It works with the advanced search on the
staff client and OPAC, and the masthead search on the OPAC when
OpacAddMastheadLibraryPulldown is enabled.
Sponsored-by: Catalyst IT
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Trying to make the code a bit more readable removing unecessary
variables and parenthesis.
Code is duplicated but no idea where we could move it to.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-BY: Brimbank Library, Australia
Signed-off-by: Amandine Zocca <azocca@ville-montauban.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This commit allows librarians to choose whether they want to query the
homebranch, holdingbranch or homebranch AND holdingbranch when they set
a library or library group search condition in the staff client and OPAC
advanced searches.
Test plan:
1. Apply patches, update database, restart services
2. Set up a record with one item. Edit the item so that:
home branch = Branch A
holding/current branch = Branch B.
Note the barcode of your item.
3. Go to Administration -> Library Groups. Create a library group that
only contains Branch A.
= homebranch and holdingbranch =
4. Go to Administration -> System preferences and find the new
SearchLimitLibrary syspref. Confirm it is set to 'homebranch and
holdingbranch' by default. Keep this tab open.
5. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
6. Submit the search and confirm you are taken to your item as expected.
7. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
8. Submit the search and confirm you are taken to your item as expected.
9. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
10. Submit the search and confirm you are taken to your item as expected.
= homebranch only =
11. Go back to your System preferences tab. Set the SearchLimitLibrary
syspref to 'homebranch'. keep this tab open.
12. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
13. Submit the search and confirm you are taken to your item as expected,
because the syspref is set to homebranch and the library group contains our item's
homebranch.
14. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
15. Submit the search and confirm you are taken to your item as expected.
16. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
17. Submit the search and confirm you are NOT taken to your item and your item
does not show in the search results.
= holdingbranch only =
18. Go back to your System preferences tab. Set the SearchLimitLibrary
syspref to 'holdingbranch'. keep this tab open.
19. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
20. Submit the search and confirm you are NOT taken to your item and your
item does not show in the search results, because the syspref is set to
holdingbranch and the library group does not contain our item's holdingbranch.
21. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
22. Submit the search and confirm you are taken to your item as expected.
23. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
24. Submit the search and confirm you are NOT taken to your item and your item
does not show in the search results.
25. Repeat the above test plan but do your searching with the OPAC
advanced search.
Sponsored-By: Brimbank Library
Signed-off-by: Amandine Zocca <azocca@ville-montauban.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the Date field to be 'Created' and adds a new column
'Updated' which shows the timestamp of the accountline.
To test:
1) Apply patch, restart services
2) Test the following staff client pages:
- Reports -> Cash register
- Patron Accounting tab -> Transactions
- Create a manual invoice. Click 'Print' on the transactions tab to
generate Invoice slip
- Make a payment. Click 'Print' on the transactions tab to generate
Receipt slip
3) Test the OPAC:
- your charges
Sponsored-by: Catalyst IT
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If BiblioAddsAuthorities and AutoCreateAuthorities are enabled, a new record is auto linked when saving and authorities generated with a 670 field that indicates which record generated the new authority.
The code to do this is called before the biblionumber is generated, so the variable that adds the biblionumber to the citation is empty
This patch moves the linking code to after the biblionumber is generated
To recreate:
1 - Enable BiblioAddsAuthorities and AutoCreateAuthorities
2 - Import or create a new record
3 - Ensure the record has controlled fields that do not have authorities before saving, i.e.:
Add a 650 with "test_bug_27577_01"
4 - Search for the authority record
5 - Note the 670 field does not contain the biblionumber
6 - Apply patch, restart all the things
7 - Repeat 2-4
8 - Note the 670 now has the biblionumber
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changed user summary CSS to style H2 not H3 heading
To test:
1) Go to OPAC homepage
2) Login as a user with at least one loan
3) See that the "User summary" heading is not styled
4) Apply patch
5) Run yarn build --view OPAC
6) Confirm the heading is now styled with grey background
Signed-off-by: Wainui Witika-Park <wainuiwitikapark@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Added a User summary <h2>
To test:
1) Go to OPAC
2) Go to home page
3) Check that there is a <h2> saying "User summary"
Sponsored-by: Catalyst IT
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the quote of the day feature is enabled, a "Quote of the day" heading
is displayed. It was an <h3> which was not proper hierarchy, so this has
been changed to an <h2>.
To test:
1) Go to staff client
2) Enable quote of the day preference
3) Go to the OPAC
4) Observe "Quote of the day" heading
5) Ensure it is an <h2>
Sponsored-by: Catalyst IT
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In the 'user_summary block', the "Welcome, user" was an <h3>. This has
been changed to a <p> as it isn't really a heading.
The styling can be changed to make it appear as it was before, or to
make it appear more significant on the page.
To test:
1) Go to the OPAC
2) Go to the home page
3) Go to the 'user_summary' block
4) Check that the part where is says "Welcome, user" is now a <p>
Sponsored-by: Catalyst IT
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On the purchase suggestions page you could end up with two "Your
purchase suggestions" headings, one as an h1 and one as an h2..
Test plan
1/ Add at least one purchage suggestion to a patron
2/ Navigate to 'Purchase suggestions'
3/ Note that just one 'Your purchase suggestsions' heading appears with
a top level '1'.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Wainui Witika-Park <wainuiwitikapark@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice
Jonathan Druart
Nick Clemens
Tomás Cohen Arazi
Joonas Kylmälä
Alex Arnaud
Victor Grousset
Owen Leonard
Colin Campbell
Ere Maijala
Emmi Takkinen
Kyle Hall
Emmi Takkinen
Lari Taskula
Aleisha Amohia
Alex Buckley
Henry Bolshaw
Wainui Witika-Park
Martin Renvoize