An expiry date like 9999-12-31 in the local timezone will make DateTime
spend a lot of time (maybe 60 seconds) on date calculation. See the
DateTime documention on CPAN.
A calculation in floating (or alternatively in UTC) would only take
a few milliseconds.
This patch makes two changes in this regard:
[1] The compare between expiry date and today in CanBookBeIssued has been
adjusted in Jonathan's patch. I am moving the compare to the floating
timezone (as was done in my original patch). This removes a hardcoded
9999.
[2] If ReturnBeforeExpiry is enabled, CalcDateDue compares the normal due
date with the expiry date. The comparison is now done in the floating
timezone. If the expiry date is before the due date, it is
returned in the user context's timezone.
NOTE: The calls to set_time_zone moving to or from floating do not adjust
the local time.
TEST PLAN:
First without this patch (and the one from Jonathan):
[1] Set expiry date to 9999-12-31 for a patron.
[2] Enable ReturnBeforeExpiry.
[3] Checkout a book to this patron. This will be (very) slow.
Continue now with this patch applied:
[4] Check in the same book.
[5] Check it out again. Should be much faster.
Bonus test:
[6] Set borrower expiry date to today. Change relevant circulation rule
to loan period of 21 hours. Test checking out with a manual due date
/time just before today 23:59 and after that. In the second case the
due date/time should become today 23:59 (note that 23:59 is not
shown on the checkout form).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has a expiry date set to 9999-12-31 (for organizations for
instance), the checkouts are very slow.
It's caused by 2 different calls to DateTime in CanBookBeIssued:
1/
DateTime->new( year => 9999, month => 12, day => 31, time_zone => C4::Context->tz );
The time_zone should not be set (as it's done in Koha::DateUtils), set to UTC or floating tz.
2/
DateTime->compare($today, $expiry_dt)
The comparaison of 2 DT with 1 related to 9999 is very slow, as you can
imagine.
For 1/ we need to call Koha::DateUtils::dt_from_string (actually, we
should never call DateTime directly).
For 2/ we just need to test if the date is != 9999, no need to compare
it in this case.
Test plan:
Before this patch, confirm that the checkouts are slow if the patron has a
dateexpiry set to 9999-12-31.
update borrowers set dateexpiry="9999-12-31" where borrowernumber=42;
After this patch, you should not see any regression when checking out
items to an expired patron and to a valid patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
TEST PLAN
---------
1) Backup the koha intranet error log.
2) Empty the koha intranet error log.
3) In staff client, go to Patrons
(/cgi-bin/koha/members/members-home.pl)
4) Pick any letter to 'Browse by last name'
-- koha intranet error log now has warns.
-- the one of importance is the uninitalized value.
5) Empty the koha intranet error log.
6) apply this patch
7) Repeat steps 3 & 4.
-- koha intranet error log does not contain the
uninitialized value error.
8) run koha qa test tools.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Happily this was only used for intranetdir.
It's time to remove it and replace existing calls.
I used the following commands to catch calls to C4::Context:
git grep 'C4::Context\->' | grep -v 'C4::Context->preference' | grep -v
'C4::Context->config' | grep -v 'C4::Context->userenv' | grep -v
'C4::Context->IsSuperLibrarian' | grep -v 'C4::Context->dbh' | grep -v
'C4::Context->set_preference' | grep -v '_syspref_cache' | grep -v
_userenv | grep -v 'C4::Context->interface' | grep -v
'C4::Context->Zconn' | grep -v 'C4::Context->queryparser' | grep -v
'C4::Context->tz' | grep -v 'C4::Context->boolean_preference' | grep -v
'C4::Context->memcached'
NOTE: I applied 14428, and then did what I suggested in comment #2.
Only intranetdir references appeared.
I applied this patch, and repeated.
Nothing appeared. This means the autoload references are
properly removed.
koha qa test tools complained about whitespace, I just fixed
those. Though, we may wish to perltidy
auth_fields_substructure.pl on another bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart agreed that C4::Input is vestigial code that should be removed.
Here is how I checked. First I found where C4::Input was used. Then, I checked
what functions are in the package: just checkdigit. Then, I confirmed that
checkdigit is not used at all in any acquisition, administration, or member
related perl scripts. Lastly, I took a look at our supposed test file for the
package. It was painfully sparse.
As such, this patch removes the test file and the package file, and removes
C4::Input references from these six files:
- acqui/addorderiso2709.pl
- acqui/basketgroup.pl
- acqui/neworderempty.pl
- acqui/uncertainprice.pl
- admin/aqplan.pl
- members/memberentry.pl
NOTE: neworderempty had 3 lines of it?! Didn't anyone see that?!
Here is the output of what I did to confirm this correction:
mtompset@debian:~/kohaclone$ git reset --hard origin/master
HEAD is now at 6e9086f Bug 3206: (QA followup) missing comma on sysprefs.sql
mtompset@debian:~/kohaclone$ git grep C4::Input
C4/Input.pm:package C4::Input; #assumes C4/Input
C4/Input.pm:C4::Input - Miscellaneous sanity checks
C4/Input.pm: use C4::Input;
acqui/addorderiso2709.pl:use C4::Input;
acqui/basketgroup.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/uncertainprice.pl:use C4::Input;
admin/aqplan.pl:use C4::Input;
members/memberentry.pl:use C4::Input;
t/Input.t: use_ok('C4::Input');
mtompset@debian:~/kohaclone$ grep sub C4/Input.pm
sub checkdigit ($;$) {
my $temp2 = substr($infl,$i,1);
if ($rem eq substr($infl,8,1)) {
} # sub checkdigit
mtompset@debian:~/kohaclone$ grep checkdigit `find acqui -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find admin -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find members -type f`
mtompset@debian:~/kohaclone$ cat t/Input.t
use strict;
use warnings;
use Test::More tests => 1;
BEGIN {
use_ok('C4::Input');
}
Apply this patch, and the output of git grep C4::Input will be empty.
Run koha qa test tools (kind of overkill)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
by caching yaml file This patch improve circulation performance by caching yaml file With this patch we saved between 300ms and 500ms on circulation page.
Following Comment #3 :
No useless warn
No tidy
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Less lines, same result.
Comments were useful on testing :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.
This patch is quite radical: the script will die loudly if the privacy
is not respected.
To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.
Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error
2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).
Note that the software error could appear on other pages too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When a suggestion is created and linked to a fund, a mail will be
generated, using a cronjob, to notify the budget owner.
A suggestion is considered as "can be treated" if its status is "ASKED".
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Bug 14408 first patch, the regexp used needs an escape on dot and does not need an ending "?"
Test plan :
- prove t/db_dependent/Auth.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Counter counter patch
Please test well, including with the null byte %00, this uses a whitelisting to only allow files ending with .tt
and not allowing ../etc
Note the previous patch tries to protect against /etc/passwd
but //etc/passwd is now vulnerable. I do think a whitelist is safer than trying to do a blacklist
/cgi-bin/koha/svc/virtualshelves/search
/cgi-bin/koha/svc/members/search
Are vulnerable
To test:
1/ Hit /cgi-bin/koha/svc/members/search?template_path=members/tables/members_results.tt
Notice you get a valid JSON response
2/ Hit
/search?template_path=..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
(You may have add more ..%2f or remove them to get the correct path)
Notice you can see the contents of the /etc/passwd file
3/ Hit
/cgi-bin/koha/svc/members/search?template_path=test%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
4/ Apply patch
5/ Hit the first url again, notice it still works
6/ Hit the second url notice it now errors with a file not found
7/ Hit the third url notice it now errors with a file not found
Repeat for the other script also
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
perl -e "use Pod::Checker;podchecker('C4/Ratings.pm');"
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a problem if a language is present but
don't have ISO639-2 code. Locale pulldown on serial
suscription is malformed.
To reproduce on master:
a) remove some entries on language_rfc4646_to_iso639
b) go to Serials > New suscription
c) Put any value on Vendor and record, press Next>>
d) Look at locale pulldown, it must default to last
removed lang from a), also other langs has no value
and are also 'selected' on html
To test:
1) Reproduce the problem
2) Apply the patch
3) Add New suscription, pulldown must be fixed
NOTE: Deleted Urdu and Chinese.
Master had both "selected" in the HTML.
Applied patch, neither were added.
Defaults to first item, which is blank meaning English.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Rephrased documentation a bit, replacing fine days with the
more general term restriction. As IsDebarred checks for existing
active restrictions.
TEST PLAN
---------
1) apply patch
2) git diff origin/master
-- do the changes make sense
3) perldoc C4::Members
-- look for the IsMemberBlocked.
-- Does it reflect current state
4) koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test:
1) Apply patch
2) perldoc C4/SMS.pm
3) Check fixed argument in example
Argument is hashref, POD is now right
Added additional space on second arg
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
TEST PLAN
---------
1) git checkout -b bug_14425 origin/master
2) perldoc C4::Context
/IsSuperlibr
-- see it is bad.
3) apply patch
4) perldoc C4::Context
/IsSuperLibr
-- see it is fixed.
5) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fix typo, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
% git grep -i IsSuperLibrarian|wc -l
55
% git grep IsSuperLibrarian|wc -l
55
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
11) Apply patch (3)
12) Log in to staff client
13) Acquisitions
14) Create a basket for two different vendors
15) Place an order in one vendor's basket.
16) Transfer the order to the other vendor's basket.
17) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- This should succeed without intervention.
18) Run koha qa test tools for the last 3 commits.
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This pref does not work at all, the interface let the user choose to
list all suggestions, but whatever he chooses the suggestion list is the
same.
This patch cleans a bit the suggestedby management.
There are a lot of cases to test, because linked to 2 prefs:
AnonSuggestions and OPACViewOthersSuggestions.
1/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 0
- A non logged in user is not able to make a suggestion.
- A logged in user is not able to see suggestions made by someone else.
2/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 1
- A non logged in user is not able to make a suggestion.
- A logged in user is able to see suggestions made by someone else.
3/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 0
- A non logged in user is able to make a suggestion.
The suggestedby field will be filled with the AnonymousPatron pref value.
He is not able to see suggestions, even the ones made by AnonymousPatron.
- A logged in user is not able to see suggestions made by someone else.
4/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 1
- A non logged in user is able to make a suggestion.
He is able to see all suggestions.
- A logged in user is able to see suggestions made by someone else.
In all cases a logged in user should be able to search for suggestions
(except if he is not able to see them).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All use cases tested, work as expected
No errors
Only comment is perhaps (in the future) a gracefull failure
when AnonymousPatron is not set, or has '0' value
Message is DBIx::Class::ResultSet::create(): Column 'suggestedby' cannot be null at ...
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Raises the minimum required version of URI::Escape from
1.36 to 3.31.
TEST PLAN
---------
1) git branch -b bug_8686 origin/master
2) ./koha_perl_deps.pl -a | grep URI
-- it will list 1.36 required
3) git bz apply 8686
4) ./koha_perl_deps.pl -a | grep URI
-- it will list 3.31 required
5) koha qa test tools
NOTE: Also default in Ubuntu 14.04 LTS,
not just Wheezy as noted in comment #15.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signoff based on Nicole's comment (bug 9990 comment 6):
"This stops happening if you upgrade URI::Escape to
3.31. We should make it clear in the Perl Modules page that an upgrade
is needed."
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch removes HomeOrHoldingBranchReturn syspref and makes circ/returns.pl respect branch
circulation rules from C4::Circulation::GetBranchItemRule. Also transfer slip notice should reflect this.
Default should always be to return item to home branch.
Test plan:
- make sure syspref 'AutomaticItemReturn' is set to 'false'
- unset 'Default checkout, hold and return policy' or set 'Return policy' to 'Item returns home'
- checkout an item and do a checkin from different branch than items homebranch
- verify that you're prompted with a transfer message to item's home branch and that print slip matches
- set 'Return policy' to 'Item returns to issuing library'
- do a checkout and a checkin from branch different than item's home branch
- verify that you're not prompted with a transfer message and that holding library is your current branch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Follow-up:
- Added 3 tests in t/db_dependent/Circulation_Branches.t to test AddReturn
policies
- Removed HomeOrHoldingBranchReturn from sysprefs.sql
- Added notice on removing syspref in updatedatabase
QA edits:
- removed trailing whitespace in tests
- moved branchname lookup from returns.pl to template
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
C4::Letters::getletter() is called in tools/letter.pl by the function
delete_confirm() to display the selected notice for deletion. Due to
current implementation of getletter(), a notice that does not use
the 'email' template (but uses any/all of the other templates - sms,
print or phone) can't be deleted from the staff client.
This patch adds deletion capability for notices that do not use email
template, but uses any/all of the other templates i.e. sms, print or
phone. This also adds 2 tests to t/db_dependent/Letters.t for testing
both conditions - a) when message_transport_type is specified b) when
it is not.
Test plan
=========
1/ Go to Tools -> Notices & Slips. Add a new notice only for print,
leave 'Library' and 'Koha module' options as default selections.
Enter 'KOHA_14206' and 'Koha Test 14206' against Code and Name
respectively, and 'Test' and 'Test Message' for subject and body.
Leave the Email, Phone and SMS tabs blank. Save the notice.
2/ On the notices listing page the new notice will be listed. Try to
delete it. It will load the 'Delete notice' dialog form, but the
table will not show any data under <th>s - 'Library', 'Module',
'Code' or 'Name'.
3/ Click the "Yes, delete" button. The page will be submitted and the
Notices listing reloaded. The print-only KOHA_14206 notice should
continue to exist. This is *wrong*.
4/ Apply this patch
5/ Reload the listings page and click on the 'Delete' link for Notice
KOHA_14206. This time, it should show the data under 'Module',
'Code' or 'Name' at least.
6/ Click on 'Yes, delete'. The page should submit and the listing page
reload. This time KOHA_14206 will be gone.
7/ Run prove -v t/db_dependent/Letters.t
All tests should PASS without any error.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The condition for the assignment depends on $searchtype to be defined
and equal to 'contains'. So this change doesn't change the semantics.
- if $term !~ /^%/
- and $searchtype eq "contain";
+ if (defined $searchtype) && $searchtype eq "contain"
+ && $term !~ /^%/;
To test:
- Home -> Circulation -> Checkout
- Search for a user that does not exist (I searched 'whywouldthisexist') on the intranet interface.
- Look at the intranet logs
=> FAIL: you get "Use of uninitialized value $searchtype in string eq at.,,"
- Apply the patch
- Repeat the search
=> SUCCESS: No warning
- Sign off :-D
NOTE: Other pages are more forgiving. Tweaked test plan.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Context is only used to retrieve a syspref value.
This patch moves the use of C4::Context to a require.
Test plan:
Try to reach the SetMarcUnicodeFlag subroutine (batchmod, add/update a biblio, etc.)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on French UNIMARC install
No errors adding/editing biblios
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current behaviour for C4::Context->preference when the DB is not still
populated with tables is to return undef. This is used by C4::Auth to identify
the need of running the installer.
This behaviour got broken by bug 13967, which lets DB errors to escalate and
thus Koha gets broken instead of prompting for install.
This patch wraps Koha::Config::Sysprefs->find inside an eval and sets undef if needed.
To test:
- In current master, drop the DB
- Load OPAC and Intranet
=> FAIL: notice an ugly software error.
- Apply the patch
- Load the OPAC
=> SUCCESS: Maintenance mode screen is shown
- Load Intranet
=> SUCCESS: You are prompted the DB credentials to run the web installer.
- Sign off :-D
Tomas
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes koha-qa.pl happy by fixing POD issues prior
to this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Running
$ prove t/Biblio.t
fails because of us now using DBIx to retrieve sysprefs. Then our mocked DBI is not "supported" by DBIx hence a warning that makes our test fail (there is one more warning now).
The cool thing about this, is that it actually helped spot a situation where GetMarcBiblio is doing wrong things because is not checking its parameters are undefined, so we have the chance to fix it.
This patch makes GetMarcBiblio return undef if no biblionumber is passed, and
also raises a conveniently carped warning. This change is tested in t/Biblio.t with new tests.
To test:
- In current master, run
$ prove t/Biblio.t
=> FAIL: a test detects a wrong warning count and fails.
- Apply the patch and run
$ prove t/Biblio.t
=> SUCCESS: Tests now pass, and there are 2 new ones.
- Sign off :-D
Regards
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When I merged 13967 into master (with 5010 already on it) I inadvertedly
removed a few lines that add a check for bad OPACBaseURL values.
While I don't agree with that check it should be discussed on a separate
bug anyway.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Despite the point of the Keyword to MARC Mappings being to simplify the
handling and display of repeated values from multiple subfields, the
holds queue viewer will only display the first value found. What it
should be doing instead is displaying all fields that match the subtitle
keyword.
Test Plan:
1) Apply this patch
2) Define multiple Keyword to MARC mappings for the subtitle keyword
3) Place a hold on a record using those subtitle fields
4) View the hold in the holds queue viewer
5) Note that all the subtitles now appear
Signed-off-by:Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
See QA comment #5
- new reports log their Id instead of 0
- format info: <name> | <sql>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch sets adds the possibility to log new, update and delete actions for saved reports.
To test:
-Apply patch
-Run updatedatabase.pl
-Enable system preference ReportsLog
-Create, duplicate, edit and delete saved reports
-Go to Home > Tools > Logs
-Verify that you can select "Reports" in Modules list
-Verify that your actions were logged
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Allow commenting in OPAC (Syspref reviewson)
- Log in to OPAC
- Do a search with many results
- Click on a biblio in result list
- Verify that you can browse the results in detail view ("Browse results")
- Repeat teh search above
- Click on the same biblio as above
- Add a comment (Tab "Comments")
- Close commenting window
- Click on "Next" in result browser
Result: The next biblio is displayed, but result browser has disappeared.
To test:
- Apply patch
- Try to reproduce issue above, verify that result browser does no longer disappear
AMended to remove whitespace chars. / MV
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug & solution checked, works well. No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
System preferences should have a package based on Koha::Object to remove
the need for direct manipulation via SQL.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/sysprefs.t
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There's no special requirement for such a recent version of the
Devel::Cover package.
We have just deprecated Squeeze, so Wheezy's version should be ok.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Two functions were triggering noisy warnings while testing:
_get_text_fields and _split_lccn.
TEST PLAN
----------
1) $ prove t/Label*
-- several warnings
2) apply patch
3) $ prove t/Label*
-- no warnings
4) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Nicer, no koha-qa errors
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
---------
1) $ prove t/db_dependent/Auth.t
-- warnings
2) Apply this patch
3) $ prove t/db_dependent/Auth.t
-- only one specific type of warning
4) Apply bug 5010 patch
5) $ prove t/db_dependent/Auth.t
-- noisy is eliminated
6) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
With patch only one warn
With 5010 no more warns
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fixed a small conflict on PerlDependencies.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Same as previous patch for opacuserjs
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the programmer unaware of case-insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To match IntranetUserCSS, intranetuserjs should be renamed
IntranetUserJS.
Test plan:
1/ Be sure there is no occurrence of intranetuserjs
2/ Confirm the pref still works as before
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the person unaware of case insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Expression form of "eval" at line 358, column 5. See page 161 of PBP. (Severity: 5)
Expression form of "eval" at line 367, column 5. See page 161 of PBP. (Severity: 5)
Expression form of "eval" at line 510, column 3. See page 161 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fixed conflict
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Expression form of "eval" at line 71, column 9. See page 161 of PBP. (Severity: 5)
Expression form of "eval" at line 85, column 13. See page 161 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Subroutine prototypes used at line 376, column 1. See page 194 of PBP. (Severity: 5)
- Bareword file handle opened at line 757, column 2. See pages 202,204 of PBP. (Severity: 5)
- Two-argument "open" used at line 757, column 2. See page 207 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Subroutine prototypes used at line 86, column 1. See page 194 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Subroutine prototypes used at line 82, column 1. See page 194 of PBP. (Severity: 5)
- "return" statement with explicit "undef" at line 102, column 28. See page 199 of PBP. (Severity: 5)
- Expression form of "eval" at line 108, column 20. See page 161 of PBP. (Severity: 5)
- Variable declared in conditional statement at line 126, column 5. Declare variables outside of the condition. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch sets $term to be an empty string.
Test plan
=========
1/ enable 'UseCourseReserves' syspref in Circulation preferences
2/ in a terminal, run a `tail -f ` on your instance's opac-error.log
3/ go to the opac, click on 'Course reserve' tab to go to
opac-course-reserves.pl
4/ notice the warning - "opac-course-reserves.pl: Use of uninitialized
value $term" appear in the `tail`ed opac-error.log
5/ apply the patch
6/ reload the page (opac-course-reserves.pl)
7/ page works but the warning in step #4 is no longer logged
8/ run qa test (i.e. koha-qa.pl -c 1 -v 2), there should be no error
Remarks: Testing result match expected test plan output. The QA tests
pass with "OK" for the commit.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This deals with my concerns raised in comment #2.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Testing C4::Creators::Lib at 100%
Deleting get_column_names subroutine (never used)
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/Creators/Lib.t
-- All 644 tests should run successfully without
any error or warning
TEST PLAN OPTIONAL
------------------
Check with bug 13899 to see the coverage of this module.
Coverage BEFORE this patch :
Statement : 11,6%
Branch : 0,0%
Condition : N/A
Subroutine : 36,0%
Coverage AFTER this patch :
Statement : 100,0%
Branch : 100,0%
Condition : N/A
Subroutine : 100,0%
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
After cleaning 'prove t' up. 'prove -r t' was attempted next.
A couple uninitialized variable warning were triggered.
TEST PLAN
----------
1) prove t/DataTables/Members.t
-- warnings.
2) apply patch
3) prove t/DataTables/Members.t
-- no warnings.
4) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Cleaned. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This way ILS-DI HoldItem and HoldTitle services also benefit from this
check
Test plan:
1/ Define some default holds policies by item type in
/admin/smart-rules.pl
2/ Use ILS-DI HoldItem service and check that those rules are respected
3/ Check that staff and opac hold behaviour is unchanged regarding
these rules.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. No regressions found,
improves the ILS-DI HoldItem response.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For some reason the regular expression used to split the multiple ISBN
fields can fail which keeps Business::ISBN from being able to parse out
and return a valid isbn. Using split() instead of the regex fixes the
issue.
Test Plan:
1) Apply the unit test patch first
2) prove t/Koha.t
3) Note the failures
4) Apply the second patch
5) prove t/Koha.t
6) Note all tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Karen Bryant <kbryant@ccpl-fl.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the *DGST notices are sent in HTML, the items are displayed in a
single line.
To reproduce:
1/ Define a *DGST notice using the <<items.content>> pattern.
2/ Checkout at least 2 items to a patron and set the due date as today.
3/ Launch the advance_notices.pl and process_message_queue.pl cronjobs.
4/ Verify the email you will receive separates the items with a line
break.
Verify you don't find a regression for non-html letters.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: the display in the notices tab is misleading here,
needs to be verified checking the sent emails or database
entries in message_queue.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This code causes the installer to re-check dependencies during the
upgrade process.
Test Plan
---------
1) Log in to staff client
2) Koha Administration -> Global system preferences -> Local
3) Change Version to previous version -- DO NOT HIT SAVE YET!
4) In command line: sudo apt-get purge libpdf-fromhtml-perl
NOTE: This could be ANY required library. I chose
PDF::FromHTML, because it has been a thorn in my side.
5) NOW! Hit the 'Save' button.
6) Log in, etc. etc...
-- Blows up on redirect to log in.
7) In command line, add it back (I had to compile my own so,
I used sudo dpkg -i /path/to/libpdf-fromhtml-perl...)
8) Apply patch
9) Edit the C4/Installer/PerlDependencies.pm to make
PDF::FromHTML required. See also bug 14103.
10) Log in to staff client
11) Koha Administration -> Global system preferences -> Local
12) Change Version to previous version -- DO NOT HIT SAVE YET!
13) In command line: sudo apt-get purge libpdf-fromhtml-perl
14) NOW! Hit the 'Save' button.
15) Log in, etc. etc...
16) Once warned you are missing it, add it back at the command line.
17) Click 'Recheck'
-- Proceeds as expected now.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The print list button only prints the page you are viewing, and not the
entire list.
Test Plan:
1) Apply this patch
2) Create a list with enough items that it will paginate
3) Browse to that list, click the 'print list' button
4) Note the entire list prints, not just the visible items
Tested in staff client, works as expected.
It would be great to have the same for OPAC as well (OPAC still prints first page only).
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At this point, no occurrence of SQL::Helper should exist.
Let's remove the package and tests.
Test plan:
git grep SQLHelper
and
git grep InTable
Should not return anything in the Koha code.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The dates should be set to undef if defined but empty, otherwise with an
empty string, '0000-00-00' will be inserted into the DB.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the only places where SQLHelper is still called.
The C4::Members::Search is not used anymore, but ModMember and
AddMember.
This patch replaced the calls to SQLHelper to use DBIX::Class.
TODO: Move them to Koha::Borrower.
Test plan:
1/ Make sure the patron search still works (no changes expected since the
code was not in used).
2/ Add a patron with all fields filled
3/ Add another patron with some fields filled
4/ Update them with other values
5/ Delete them
You should not get any errors.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes two files, serials-recieve.pl and serial-recieve.tt
serials-recieve.pl is not called anyware
(it's recieve!)
Also removes the sub removeMissingIssue called only from serials-recieve.pl
git grep serials-recieve.pl .
C4/Serials.pm:called when a missing issue is found from the serials-recieve.pl file
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f" action="serials-recieve.pl" onsubmit="return barcode_check()">
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f2" action="serials-recieve.pl">
serials/serials-recieve.pl:serials-recieve.pl
Just a POD entry and self reference.
After removing of files
git grep removeMissingIssue .
C4/Serials.pm: &check_routing &updateClaim &removeMissingIssue
C4/Serials.pm:=head2 removeMissingIssue
C4/Serials.pm:removeMissingIssue($subscriptionid)
C4/Serials.pm:sub removeMissingIssue {
t/db_dependent/Serials.t:is(C4::Serials::removeMissingIssue(), undef, 'test removing a missing issue');
Not used anymore
To test:
1) Apply the patch
2) Check serials workflow, no changes must be noted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1. Replace all calls to $sth->fetchrow_array
with a call to $dbh->selectrow_array
2. Cleaning Review.t file with perltiny
3. Cleaning Review.t && Review.pl files with koha-qa tool
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Testing C4::Review in t/db_dependent/Review.t
Adding a pod for every sub
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/Review.t
-- All 117 tests should run successfully without
any error or warning
TEST PLAN OPTIONAL
------------------
Go check bug 13899 and see that coverage is 100% for this module.
Coverage BEFORE this patch :
Statement : 21,9%
Branch : 0,0%
Condition : 0,0%
Subroutine : 33,3%
Pod : 33,3%
Coverage AFTER this patch :
Statement : 100,0%
Branch : 100,0%
Condition : N/A
Subroutine : 100,0%
Pod : 100,0%
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All tests run
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently batch_id is assigned upon creation of a new batch object. This patch leaves batch_id as 0 at creation and adds a check when adding items. If batch is new then batch_id is created then
Test plan:
1 -In one browser window, go to tools->label creator and click the new batch button
2 - Before adding items, open a new browser, and go tools->label creator and click the new batch button
3 - Note that both batches have the same number listed
4 - Add an item to the first batch - you should now see one item in the batch
5 - Add an item to the second batch, you should see two items in the batch
6 - Apply patch and repeat steps 1&2
7 - Note that neither batch lists a batch number
8 - Add an item to the first batch, you should see one item and a batch number
9 - Add an item to the second batch, you should see one item and a new batch number
Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the moment, it is possible to create records in acquisitions, but the
ACQ framework is only used for items created in this module.
This patch allows to defined default values in the ACQ framework for
records created on the acquisition module.
Test plan:
1/ Make sure you have the ACQ framework created (otherwise create it
from the default framework).
2/ Define a default value for a field (for instance 099$z=1).
3/ Go in the acquisition module and create a new order from a new
record.
4/ Fill mandatory information and save.
5/ Go on the detail page of this record and verify the default value
exist.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Correct $KOHA::VERSION to $Koha::VERSION.
Also, passing this string to LWP::UserAgent is wrong. It expects key/value
pairs. Since this string is apparently intended as an agent, this patch
passes it as such.
Note: The OverDrive has unfortunately no unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested this change in the perl debugger with just these lines:
use C4::External::OverDrive;
C4::External::OverDrive::_request();
Printed $ua->agent while stepping into sub _request.
Without the agent change, the adjusted Koha string would just be ignored
and I would still have "libwww-perl/6.04" as agent.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the staff search results, if an item is both checked out and lost,
the result will appear as two item lines where one line has the lost
status and the other line has the rest of the item's data.
Test Plan:
1) Check an item out to a patron
2) Mark the item as lost *without* removing the item from the patron's
record, either by using longoverdue.pl or by editing the itemlost
field in the database directly.
3) Perform a search where that item will be in the results
4) Note the improper display of the item's data
5) Apply this patch set
6) Reload the search restults
7) Note the item now displays correctly
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This match sets $sortby (previously undefined value) as an empty string to get rid of the warns.
To test:
1) Go to a URL such as http://localhost:8080/cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operator=contains&value=a&marclist=any&and_or=and
2) Notice the warns in the error log
3) Apply patch
4) Reload URL
5) Notice page still works but no warns in error log
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I would have done $sortby //= '';
But this works too. :)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When creating a new report, the limit step let you choose
itype|itemtype.
But it should be itype|itemtypes.
If you try to create a guided report and you choose this option as a
limit, you will get a warning on saving it:
Errors found when processing parameters for report:
itype: The authorized value category (itemtype) you selected does not exist.
Looking at the code: reports/guided_reports.pl l.657
elsif ( $authorised_value eq "itemtypes" ) {
Test plan:
0/ Don't apply the patch
1/ Create a guided report, select Koha itemtype as a limit(step 4)
2/ Confirm you get the error when saving
3/ Apply the patch and repeat step 1
4/ There is no error and the report should work correctly
Tested with steps in comment #4/#5, error is gone after applying patch.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The Readonly and Readonly::XS package are only used in Koha::Calendar.
IMO the added value of there packages does not justify their purpose.
Test plan:
1/ Remove Readonly and Readonly::XS
2/ Open the calendar and confirm you don't get any error concerning missing
dependency
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is a rough start. I believe it runs exponentially
faster, but its equality to the previous version needs to be
tested before I clean it up to acceptable standards.
Nested hashes of hashes was being a debugging nightmare.
Moved the SQL select to C4::Koha.
Changed the GetItemsForInventory to have a hashref parameter.
Added interface, in case there is a need for 'opac' vs. 'staff'.
Added t/db_dependent/Items/GetItemsForInventory.t
Added t/db_dependent/Koha/GetKohaAuthorisedValuesMapping.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When getting the next frequency number, use the real number of days for each month and each year.
Unit tests updated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This guess uses the following algorithm
1/ Get the number of days remaining from first issue of this unit of
time until the end of the unit of time (using 7 days for week, 28 for
month and 365 for year)
2/ Divide it by the number of issues per unit
3/ Take the integer part of the result, this is the number of days to
add to previous serial published date
This patch also try to guess the date of the first issue of a unit of
time. Before that, it was:
- for week: monday of week
- for month: 1st day of month
- for year: 1st day of year
Now it uses firstacquidate.
Example:
firstacquidate = 1970-01-07 (wednesday)
unit = week
issuesperunit = 2 (2 issues per week)
From wednesday to sunday, there are 4 days so we add 2 days to get the
next date.
The next dates should be:
- 1970-01-09 (+ 2 days)
- 1970-01-14 (wednesday of next week)
- 1970-01-16 (+ 2 days)
- ... and so on
Test plan:
1/ Go to numbering pattern creation page (Serials -> Manager numbering
patterns -> New numbering pattern)
2/ In "Test prediction pattern" fieldset, set subscription length to 50
issues (this avoid to compute the next 1000 dates, which can take time)
3/ Fill first issue publication date
4/ Choose the frequency you want to test
5/ click on "Test pattern" button
6/ Check that the dates are correct
7/ Repeat steps 3-7 until you think you have tested enough cases
Interesting frequencies to test:
- 1/day
- 1/week
- 2/week
- 6/week (firstacquidate should be monday or tuesday, or the generated
dates will be the same for all the week)
- 1/month
- 2/month
- 3/month
- 1/year
- 2/year
- 3/year
----------------
Sign off report:
----------------
-Followed the test plan. Unit tests work. Also trying some more strange
frequencies with our librarians:
5/year, 43/year, 10/year.
-Received all serials for a subscription and found no errors.
-Received some serials with frequency 2/month pre-patch, getting publication
date as 1st of every month for each magazine. Having applied the patch,
publication dates started working mid-subscription for new magazines.
-Works well and fine!
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A much needed refactoring. Thanks for seeing the effort through.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1/ Execute the updatedb entry
2/ Create a list
3/ Go on the shelve list and confirm that the creation and last
modification time are now displayed.
4/ Confirm that you are able to sort the list by creation/modification
time.
Applied on top of 13419 (rebased updatedatabase.pl)
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The due dates should be displayed as due dates :)
i.e not displayed with 23:59
On the way, this patch fixes the sort on the info column.
The column is now sorted using the due dates
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(Alternative for patch Bug 13889: Log with parameters)
To test:
- Apply patches interactive and skip following patch: Bug 13889: Log with parameters
- Tweak a cron job in order to call cronlogaction twice, one with a param at the beginning of the cron ob, e.g.
cronlogaction("This is my message") and one without param.
- Run this cron job.
Result: You should have two entries in the log, one with and one without additional information after the path and name of the calling script.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds information about cron jobs performed and make it viewable
under Home > Tools > Logs ("Browse system logs")
To test:
Apply patch
- Got to system preferences and set 'CronjobLog' to: [Log] information from
cron jobs.
- Run some cron jobs
- Go to Home > Tools > Logs
- Verify that you have a selection 'Cron jobs' in drop-down 'Module'. Select it
with Action "All" and Submit.
- Output should show Date/time and info about Cron jobs
Rebased to work on top of Bug 6911 (conflict in viewlog.tt) /MV
Rebased after applying patch for Bug 6911 /MV
Conflicts resolved:
misc/cronjobs/overdue_notices.pl
misc/cronjobs/cleanup_database.pl
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
- Merge both patches, and fix updatedatabase.pl
- Works as described. Provide intersting feedback from cronjob scripts.
--
Modified version taking in account syspref CronJobLog. Handling simplified by introducing a convenience sub cronlogaction in C4/Log.pm /MV
Amended to take in account comments #11, #12, #13 /MV
http://bugs.koha-community.org/show_bug.cgi?id=13899
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Any search limits including a ccode will break the search facts.
Test Plan:
1) Run an advanced search using a ccode limit
2) Try using any of the facet links of the left
3) Note they are broken
4) Apply this patch
5) Refresh the results
6) Note the facet links are no longer broken
Note: I have not been able to reproduce this issue on my own test
system, but have noted the problem on at least a dozen Koha servers.
I could not reproduce the bug either, but I saw it on the Bywater Demo (comment #1).
Applied patch and tested facets, no problems found, signing off
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Can not reproduce the problem, but I can also not find a regression.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Oops, bad paramaters passed on executing the sql query produced
unexpected behaviors.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch deals with all hard-coded status codes in the C4::Serials
module.
Test plan:
Test a complete workflow in the serial module (create, order, receive,
generate next) trying to use all statuses.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Make the code a bit more understandable by using constants to define
the status values and reference those. Adds self-documentation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
HTML::HTMLDoc is required in order to generate the discharges in PDF format.
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- links to the new pages.
- syspref description
- links on the main page (intranet)
- the DISCHARGE type for debarment
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>