Koha reports 'sending mail' while we actually are still
processing mail. It could still be delayed, fail, etc.
Test plan:
Run process_message_queue in verbose mode. If a message
get processed, you should see:
Processing email message to patron: 51 at /usr/share/koha/C4/Letters.pm line 1008.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
We already tested it. Just look at changes in this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Includes:
[1] Add a counter in the send_or_die mock.
[2] Correct from processed count to sent count.
[3] More extensive testing for limit parameter and domain limits.
Test plan:
Run t/db_dependent/Letters.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Includes:
[1] Do no longer use the limit in the sql selection, but apply the
limit as a maximum for the number of sent messages. This is more
practical in terms of not flooding your mail server (and the
receiving ones).
[2] Replace call of _get_unsent_messages by Koha objects search.
[3] Do no longer report the number of messages seen, but report the
number actually 'sent'.
[4] If we lookup the to_address but we need to delay a message, save
the email address for the next run. Also optimizing patron lookup
in _send_message_by_email.
[5} Add support for $where parameter in SendQueuedMessages. Used by
process_message_queue.pl.
[6] Handle scalar/array for letter_code and type parameter too.
Test plan:
[1] Adjust your domain limit settings in koha-conf.
Use notices to three domains. Group A and B.
<message_domain_limits>
<domain><name>A</name><limit>1</limit><unit>1h</unit></domain>
<domain><name>B/name><belongs_to>A</belongs_to></domain>
<domain><name>C</name><limit>1</limit><unit>1h</unit></domain>
</message_domain_limits>
Replace A, B and C with your choice. Do not forget the belongs_to.
Restart all.
[2] Disable cron job for message queue.
[3] Generate two notices for each domain A, B and C (in that order).
Make sure that borrowers involved have correct address.
[4] Run process_message_queue.pl -limit 1
[5] Check that one is sent for A, 5 pending.
[6] Run process_message_queue.pl -limit 2
[7] Check that one is sent for C, 4 pending.
[8] Run process_message_queue.pl (without limit).
[9] Check that nothing is sent, 4 pending.
[10] Check that message_queue.to_address is filled for those 4.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Minimal adjustment to get the feature working.
Will still be improved in follow-up.
Test plan:
[1] Add a domain limit to your koha-conf:
<message_domain_limits>
<domain><name>gmail.com</name><limit>1</limit> <unit>1h</unit></domain>
</message_domain_limits>
Replace gmail.com by the domain you want to send to.
Restart all.
[2] Disable cron job for message queue.
[3] Generate two pending notices in the queue.
[4] Run process_message_queue.pl
[5] Check that one is sent, one is still pending.
[6] Run again.
[7] Check: nothing is sent, last one still pending.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The functionality is extended a bit here by:
[1] Allowing to combine domains in a shared count.
[2] Only counting sent messages for the specified
domains when it is really needed.
Test plan:
Run t/db_dependent/Koha/Notice_Util.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Ground work in new module.
Includes unit test.
Test plan:
Run t/db_dependent/Koha/Notice_Util.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the HTML customizations template to replace tab
markup with the use of WRAPPERs.
- Apply the patch and go to Tools -> HTML customizations.
- Create or edit an entry.
- You should see tabs for each available language, for example
Default, English, French.
- Test adding content to each language to confirm that the correct
information is saved under the correct tab.
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates various templates so that fieldsets with the
"action" class are placed outside the form's main fieldset.
To test, apply the patch and check the following pages to confirm that
changes to form structure look correct:
- Cataloging -> Quick spine label creator
- Patrons -> Patron details -> Files
- Patrons -> Patron details -> Housebound
- Circulation -> Upload offline circulation file
- Tools -> Patron card creator -> Manage -> Images
- Point of sale -> Transaction history -> "Older transactions" form
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes a small change to the display of the note
"No EDIFACT configuration for..." on the basket group page to
only display if the system preference EDIFACT is set to "Enable".
To Test:
1. apply patch
2. navigate to a vendor over Acquisitions -> Vendor e.g. My Vendor
3. create a basket group (doesn't have to have any baskets, an empty one will do)
4. close the basket group
5. set system preference "EDIFACT" to "Enable"
6. navigate to Administration -> EDI Accounts and make sure the vendor doesn't have
an EDI account configured
7. navigate to your vendor's closed basket groups
over Acquisitions -> Vendor -> Basket groups (left panel) -> Tab "Closed"
8. you should see a message "No EDIFACT configuration for (name of vendor)" in the
Action column
9. set system preference "EDIFACT" to "Disable"
10. go back to your vendor's closed basket groups
11. you shouldn't see the message "No EDIFACT configuration for (name of vendor)"
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change quotes the 'rank' keyword in the advanced editor,
so that it doesn't cause fatal crashes when using MySQL 8
Test plan:
0. Apply patch and koha-plack --restart kohadev
1. Enable advanced editor
http://localhost:8081/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=EnableAdvancedCatalogingEditor
2. Go to http://localhost:8081/cgi-bin/koha/cataloguing/editor.pl#new/
3. Click on "Advanced" on the left nav
4. Note that "LIBRARY OF CONGRESS" is ordered before "NATIONAL LIBRARY OF FRANCE"
5. Rejoice!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It must be removed, we don't need it since bug 22417
Test plan :
Play with batch record modification and check there is no JS error
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Run prove t/db_dependent/Template/Plugin/Categories.t
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Like in Koha::Template::Plugin::Branches, methods in
Koha::Template::Plugin::Categories must return categories sorted by
description.
Test plan :
1) Create a new patron category with code ZZZ and description AAAAAA
2) Go to patron search /cgi-bin/koha/members/members-home.pl
3) Look at filter by category :
=> Without patch the value AAAAAA is last
=> With patch the value AAAAAA is first
4) Click on 'New patron'
=> Without patch the value AAAAAA is last
=> With patch the value AAAAAA is first
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since Bug 30718, date due uses flatpickr.
The JavaScript code setting due date via on-site checkout checkbox needs to be adapted.
Sort of like Bug 30717.
This patch renames the variable sent to template
'today_due_date_and_time' to avoid confusion with variable 'todaysdate'
used in other templates.
Test plan :
1) Enable system preference 'OnSiteCheckouts'
2) Go to a patron circulation page /cgi-bin/koha/circ/circulation.pl
3) Click on settings icon inside barcode input
=> Check due date input is empty
4) Click on 'On-site checkout'
=> Check due date input is filled with today date at 23:59
5) Fill barcode input and do check-out
6) Check due date is correct
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to any record
2. Hit the edit button on an item in the holdings table
3. Modify the URL so that the query param for the itemnumber is either
3.1 empty: /cgi-bin/koha/cataloguing/additem.pl?op=edititem&biblionumber=384&itemnumber=
3.2 an itemnumber that doesn't exist:
/cgi-bin/koha/cataloguing/additem.pl?op=edititem&biblionumber=384&itemnumber=9999999999
3.3 whatever else you come up with..
4. Check the same thing for the dupe option (op=dupeitem)
5. Sign off
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Check whether the current op is edititem or dupeitem and if so check
whether the itemnumber supplied as a query param actually exists.
If it doesn't, redirect to the additem op and hide all UI elements except
for a dialog that gives options to add a new item to the record or to
view the records holdings.
This behaviour was adapted from the addbiblio view, as suggested by
Fridolin.
To test:
1. Go to any record
2. Hit the edit button on an item in the holdings table
3. Modify the URL so that the query param for the itemnumber is either
3.1 empty: /cgi-bin/koha/cataloguing/additem.pl?op=edititem&biblionumber=384&itemnumber=
3.2 an itemnumber that doesn't exist:
/cgi-bin/koha/cataloguing/additem.pl?op=edititem&biblionumber=384&itemnumber=9999999999
3.3 whatever else you come up with..
4. Check the same thing for the dupe option (op=dupeitem)
5. Sign off
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The change is obvious, we shoulf call the title endpoint, not package.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the example NGINX config to increase the
proxy_buffer_size to 16k. The default value of 4k (on some platforms)
has empirically been shown to be a bit too small for the Link
headers emitted by the REST API when pagination is requested.
To test
-------
[1] Set up a Koha system with NGINX as a reverse proxy in
front of it (either in front of Apache or in front of
of Starman).
[2] Perform a patron search that returns at least two pages
of results and navigate to the second page.
[3] Note that the navigation can fail with a 502 HTTP error
and an "upstream sent too big header while reading response
header from upstream" error in the NGINX log.
The problem is most likely when the pagesize of the server
running NGINX is 4096 bytes.
[4] Update the NGINX configuration per this patch and restart
NGINX.
[5] This time, repeating step 2 should work.
Signed-off-by: Galen Charlton <gmc@equinoxOLI.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the lists template so that it uses the new WRAPPER
directive to build tabbed navigation.
To test, apply the patch and go to the lists page in the staff
interface.
- Confirm that the two tabs, "Your lists" and "Public lists" look
correct and work correctly.
- Test that the correct tab is selected when you add the "public" or
"private" parameter to the url:
/cgi-bin/koha/virtualshelves/shelves.pl?op=list&public=1
/cgi-bin/koha/virtualshelves/shelves.pl?op=list&public=0
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the checkout history template so that it uses the new
WRAPPER directive to build tabbed navigation.
In order to make the template logic a little easier to parse I moved the
table of checkouts into its own BLOCK to be used when on-site checkouts
are enabled or disabled.
To test, apply the patch and locate a patron who has a checkout history.
- If you have on-site checkouts enabled you will see three tabs: All,
Checkouts, and On-site checkouts.
- Each tab should work correctly: The checkouts tab showing only regular
checkouts, the on-site checkouts tab showing only on-site checkouts.
- If you have on-site checkouts disabled there should be no tabs, the
table of checkouts should be displayed inside a "page-section" div
instead.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the holds template so that it uses the new WRAPPER
directive to build tabbed navigation.
Note: this patch includes indentation changes, so check the diff
accordingly.
To test, apply the patch and locate a bibliographic record which
can be placed on hold.
- Start the process of placing a hold.
- If you have any patron clubs defined, there should be two tabs:
Patrons and Clubs. Both should look correct and work correctly.
- If you have no patron clubs you should see only the Patrons tab.
Works as advertised.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the search history and advanced search templates in
the staff interface so that they use the new WRAPPER directive for
building tabs.
The patch also makes a minor change to CSS in order to accommodate the
different markup.
To test, apply the patch and rebuild the staff interface CSS.
- Go to the catalog's advanced search page. You should see tabs for each
of the selections defined in the AdvancedSearchTypes system
preference.
- The tabs should look correct and work correctly.
- If necessary, enable the EnableSearchHistory system preference.
- Click the logged-in user name in the header menu and choose "Search
history."
- On this page you should see two tabs, catalog and authority. Both tabs
should look correct and work correctly.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the MARC detail views of bibliographic and authority
records so that they use the new WRAPPER directives to build tabs.
To test, apply the patch and locate a bibliographic record in the
catalog.
- Click the "MARC" menu item in the left-hand sidebar.
- Confirm that all tabs work correctly.
Perform the same test by going to Authorities and doing a search for
authorities. Clicking one of the results should take you to a
tabbed MARC view.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
ERMProviders is a sys pref, place it in sysprefs
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It makes it so that any changes to the local property
is also reflected in the store and other components are
made aware of the new value. No need to explicitly
change both local property and store property values.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need the sysprefs' values to be shared between the components
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sometimes the initial page load takes more than 4 seconds.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It will be easier to mock/set them from cypress tests.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In plugins table plugins/plugins-home.pl the status enable/disable is with the name, styled as a label.
With new interface ENABLED is yellow, this looks weird.
Also I bet this is bad for accessibility.
I propose to move this info to a dedicated column.
I use bootstrap classes bg-success and bg-warning like in about.pl
Test plan:
1) Install some plugins
2) Go to Administration > Manage plugins
3) Check you see table with column status
4) Disable a plugin
5) Check you see 'Disabled' in status
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves OPAC third-party assets from opac-tmpl/bootstrap/lib
to opac-tmpl/lib, eliminating some redundancy and making it simpler
to understand where such assets should be found.
To test, apply the patch and confirm that there is no longer a lib
directory under opac-tmpl/bootstrap.
Test various parts of the OPAC to confirm that assets are still loading
correctly. Everything should look right and work correctly. The
browser's developer console should be free of errors.
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On bug 30708 we will need to modify sysprefs from the UI (Vue app), it
could be useful for other developments as well and so it is moved on its
own bug report.
Test plan:
It can be tested independently of bug 30708 using the following code:
const client = APIClient.sysprefs
client.sysprefs
.update(
"CardnumberLength",
"42"
)
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are 3 tables in the ERM module where we display the vendor name
but without a link to the acquisition module.
This patch adds the links.
Test plan:
Create an agreement, a license and a local package.
Pick a vendor and notice that now there is a link on the list view.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates templates which have already been updated to use the
new tab WRAPPER system for generating tab markup. Templates are changed
so that tab label strings are wrapped in <span> to make them
translatable.
The html_helpers include file is also updated so that the example code
in comments shows the right pattern (the breadcrumb example is similarly
corrected).
To test apply the patch and run the translation script to update the .po
files, e.g.
perl misc/translator/translate update fr-FR
Check the updated .po files for some of the lines modified in the patch:
- koha-tmpl/intranet-tmpl/prog/en/modules/about.tt:31
- koha-tmpl/intranet-tmpl/prog/en/modules/acqui/addorderiso2709.tt:69
- koha-tmpl/intranet-tmpl/prog/en/modules/acqui/basketgroup.tt:330
- koha-tmpl/intranet-tmpl/prog/en/modules/acqui/invoices.tt:141
- koha-tmpl/intranet-tmpl/prog/en/modules/admin/item_circulation_alerts.tt:118
- koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-search.tt:259
- koha-tmpl/intranet-tmpl/prog/en/modules/tools/letter.tt:455
- koha-tmpl/intranet-tmpl/prog/en/modules/serials/subscription-detail.tt:98
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* h2 h2 directly following each other make no sense. Changed to h2 h3
* ids changed to IDs
* Linked the record ID to the catalog entry
Note: We also have this link in the batch record mod job details
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We don't do a lot of processing to the data, but we can still
make the display a bit nicer, to show how many records were
done, and show the record ids.
To test:
1 - Do some batch modifications on a system running ES
2 - Check background jobs to see ES jobs
3 - Note display
4 - Apply patch
5 - Confirm display is improved
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With the new wrappers we will translate every part of the
breadcrumb as a separate string and only once. So single words
like 'new' can be problematic in translation.
This changes:
* New > New identity provider
* Edit > Edit identity provider
* (Item search fields) <name of search field> > Edit <name of search field>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several administration templates so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
Administration ->
- Library EANs (list, new, edit, confirm delete)
- Identity providers (list, new, edit)
- Manage domains (list, new, edit)
- Item circulation alerts
- Item search fields (list, new, edit)
- Item types (list, new, edit, delete confirm)
- Koha to MARC mapping
- Library groups
- MARC frameworks ->
-> Actions -> MARC structure (list, new, edit, delete confirm)
-> View, edit, and delete confirm
- Record matching rules (list, new, edit, delete confirm)
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the cities administration page as a proof-of-concept for
using the [% t() %] construction to wrap translatable string in template
<title> tags. This should result in a significant improvement in
translatability.
To test, apply the patch and run the translation script to update the
.po files, e.g.
perl misc/translator/translate update fr-FR
Check the updated .po files:
- In fr-FR-staff-prog.po you should no longer see a reference to
cities.tt line 6, "#: koha-tmpl/intranet-tmpl/prog/en/modules/admin/cities.tt:6"
- In fr-FR-messages.po you should see several strings which have been
pulled individually from the <title> tag:
- cities.tt:9, msgid "Modify city"
- cities.tt:11, msgid "New city"
- cities.tt:15, msgid "Confirm deletion of city"
- cities.tt:19, msgid "Administration", msgid "Cities", msgid "Koha",
and msgid "Administration"
Translate the strings in fr-FR-messages.po and install the updated
translation:
perl misc/translator/translate install fr-FR
Swith to the update language in the staff interface and confirm that the
Cities page title is translated correctly.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch finds places in the updated breadcrumbs markup where a
translatable string is isolated in a way that makes it hard for the
translation script to find it, and wraps these strings with <span>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=33005
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several acquisitions-related templates so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Acquisitions ->
- Late orders,
- moddeliverydate.tt
- modordernotes.tt
-- These two templates aren't linked to from anywhere, but
you can navigate directly to:
http://127.0.0.1:8081/cgi-bin/koha/acqui/modordernotes.pl?ordernumber=X and
http://127.0.0.1:8081/cgi-bin/koha/acqui/moddeliverydate.pl?ordernumber=1
- Order search, order search results
- Invoice search,
- Invoice details,
- Invoice files
- Vendor -> Basket -> Add to basket ->
- From a new (empty) record
- From existing orders (copy)
- From a subscription
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=33005
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
