Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. Add item level hold to a record/item, make sure patron has no other
holds on that record
3. Go to /cgi-bin/koha/reserve/request.pl?biblionumber=xxx where xxx is
the record you placed the hold for
4. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>" dropdown
5. Select "Next available" from the dropdown
6. Click Update hold(s)
7. Observe dropdown is gone and cell value has changed from
"Only item <barcode>" to "Next available"
8. Cancel the hold and add two item level holds for the same patron
9. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>", but no select dropdown
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This page is a single form, all fields must have inputs to avoid data loss/mismatch
To test:
1 - Find a record in the catalog and add or edit items to have one item with a barcode and one without
2 - Place an item level hold on the item with no barcode
3 - Place another hold for a different patron on the item with a barcode
4 - From the holds table add an expiration date to the hold with a barcode and save
5 - Note the hold on the item with no barcode is now on the item with a barcode and the other hold is now a next available hold
6 - Delete the holds
7 - Apply patch
8 - Repeat 2-4
9 - Confirm the itemnumbers for the holds have not changed
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Make some holds on a record and make sure some are set to expired.
2. Go to to reserve/request.pl?biblionumber=X for the biblionumber
3. Try updating something besides the expiration date. i.e. Pickup library
4. Click Update hold(s)
5. Notice the expirated holds have lost their expiration date.
6. APPLY PATCH
7. Try steps 2-4 again, this time the expiration date shold be retained.
8. Make sure Table settings still work and you can properly hide columns.
9. The hold expiration date should be hide-able.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a record with several holds on it.
2. Go to the holds page for that record ( /cgi-bin/koha/reserve/request.pl?biblionumber=144 )
3. Cannot sort by columns
4. Apply patch, restart_all
5. Now the table should be a dataTable that will allow you sort.
6. Try hiding columns by clicking on the 'Columns' icon above the table, make sure columns are correctly being hidden.
7. Try to hide columns by going to Adminstration > Table settings ( Circulation > Holds > patron_holds_table ), make sure columns are correctly being hidden.
8. Now login with a user who has the 'place_holds' permission but does NOT have the 'modify_holds_priority' permssion.
9. The table will not have the change priority columns. Make sure all columns can still be hidden/shown correctly for that use.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Add item level hold to a record/item, make sure patron has no other
holds on that record
3. Go to /cgi-bin/koha/reserve/request.pl?biblionumber=xxx where xxx is
the record you placed the hold for
4. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>" dropdown
5. Select "Next available" from the dropdown
6. Click Update hold(s)
7. Observe dropdown is gone and cell value has changed from
"Only item <barcode>" to "Next available"
8. Cancel the hold and add two item level holds for the same patron
9. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>", but no select dropdown
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Place some holds and go to /reserve/request.pl for that bib.
2. If the reserves.expirationdate is set to today or some date in the past the date does not display in the Flatpickr instance.
3. Change the reserves.expirationdate to sometime in the future, the date displays.
4. Aply patch, restart_all
5. Try steps 2-3 again.
6. This time if the expiration date is in the past you should see it displayed. However it will be uneditable.
7. Make sure holds with a expiration date in the future can still be properly edited.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Christine <chlee@pascolibraries.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates icons which are listed as having changed names in
this document:
https://fontawesome.com/docs/web/setup/upgrade/upgrade-from-v4
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch.
2. Place multiple holds on a record and then go suspend some of them.
3. Those suspended holds should now have a class of 'suspended'
4. Now you can add any kind of CSS you want to make those rows stand out. You can try adding this to IntranetUSerCSS:
.suspend > td {
color: red;
}
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This sets the proper markup for table headers in the holds page and thus
grabs the proper header row underline.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the way the priority column displays when viewing a
list of holds as a user who doesn't have permission to change hold
priority.
To test:
- Apply the patch and log into the staff interface as a user with
at least "place_hold" permission.
- Locate a record which can be put on hold and place multiple holds.
- View the list of holds.
- As a user with both "place_hold" and "modify_holds_priority"
permission, you should see a "Priority" column with <select> fields
allowing you to change hold priority. You should also see the arrow
buttons for changing priority.
- As a user with only "place_hold" permission, the "Priority" column
should show the priority as a number. You should not see the arrow
buttons.
- In both cases, confirm that all operations work correctly: Changing
hold date, expiration date, pickup library, suspended status;
Cancelling holds.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch offers an alternate take on using Font Awesome icons on the
holds page in place of images as links.
This revised patch updates the icon implementation so that it is easier
to override the Font Awesome icon selection with CSS. Test by adding the
contents of this file to the IntranetUserCSS preference:
https://gitlab.com/-/snippets/2319364
To test:
1 - Place some holds on a record
2 - View the 'Holds' tab in the staff interface
3 - Note the new icons
4 - Note their hover test
5 - Confirm the buttons still work as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are missing quotes, and the translate script is messing up with
the generated template.
Error is:
Template process failed: file error - parse error - holds_table.inc line 216-217: unexpected token (hold)
The generated line, without this patch is:
216 <td><input %]="%]" class="printholdslip" data-reserve_id="[%" hold.reserve_id="hold.reserve_id" html="html" name="printholdslip" type="button" value="Recibo" |="|"></td>
With this patch applied:
216 <td><input class="printholdslip" data-reserve_id="[% hold.reserve_id | html %]" name="printholdslip" type="button" value="Recibo"></td>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To be nicer with translators.
Update the PO files for whichever languages will show how this is useful.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the holds table to always insert a hidden input when a hold is 'found'
and covers the case where the hold is 'found' but doesn't match known statuses
To test:
1 - Place two holds on a record for two different patrons, with different pickup locations
2 - Check in one item at expected branch to set waiting
3 - Then either:
- Use batch modification or item editor to change the holding branch for the item
- Sign in to a different branch and manually transfer the item back to it's home location
4 - View the holds for the record
5 - Note the 'Pickup library' column is blank for that hold
6 - Change pickup location for other hold and press 'Update holds'
7 - Note the waiting hold is still blank, and now second hold has no pickup location
8 - Check the DB and note the first hold has had the pickup location changed
8 - Apply patch
9 - Delete holds and repeat 1-4
10 - Note the waiting hold now displays:
Hold expected at {Branch}, please checkin to verify status
11 - Change location for second hold and update holds
12 - COnfirm location chanegd correctly and first hold unaffected
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
1. Apply patch
2. Make some holds, have some item level and some bib level
3. On request.tt notice a new column on the holds_table called 'Print hold/transfer slip'
4. Make sure the button works and takes you to the proper hold/transfer slip
5. Make sure it works well with both item/bib level holds
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We don't need them. We could also remove the biblionumber but it
requires change to the controller I'd prefer to not do now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
From holds list of a bibliographic record, the "unsuspend" button does not work as expected.
The form is submitted but the suspension is still there.
There are 3 requests, 2 GET and 1 POST.
One of the GET is rejected by Firefox (NS_BINDING_ABORTED)
Test plan:
Place some items on hold, play with suspend/unsuspend from the hold list
/cgi-bin/koha/reserve/request.pl?biblionumber=XX
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We must reduce the instantiations as much as possible to take advantages
of the default values and specific behaviours we have defined in
calendar.inc
This patch is suggesting to have a .flatpickr class and using the data
attributes:
- flatpickr-futuredate
- flatpickr-pastdate
- flatpickr-enable-time
- flatpickr-on-close-focus
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch generates a function to be used in places where select2
dropdowns are usesd for choosing pickup locations. This cleans
repeated/almost identical code introduced by different bugs.
To test:
1. Make sure choosing pickup locations works
2. Apply this patch
3. Repeat 1
=> SUCCESS: No functional changes
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the appearance of the "confirm holds" page, shown
during the process of placing a hold for someone in the staff interface.
Most of the changes affect the appearance of the page when placing
multiple holds on titles which have one or more holds on them already.
The changes are intended to make the page clearer and easier to scan,
especially when placing multiple holds at once.
Also changed: The page heading when placing multiple holds now changes
based on whether you've selected a patron or not. It says "Search
patrons or clubs" when it's waiting for a patron/club selection. It says
"Place holds" after the patron/club has been selected. This is instead
of "Confirm holds" on both pages.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> System preferences and set HoldsSplitQueue to
"nothing."
- Perform a search in the staff client catalog and place multiple holds
titles from that result set on hold for a patron.
- Perform the same search and select one or more of the titles you
selected before in addition to one or more titles with no holds.
- After clicking the "Place hold" button you should see a page with the
heading "Search patrons or clubs" showing information about existing
holds. This section of the page should be clear and readable, with
clear distinction between each section of information about each hold.
- Test this page again under each different option for the
"HoldsSplitQueue" system preference by changing the preference and
reloading the page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows staff patrons to cancel multiple holds in bulk.
To test:
1. Apply this patch
2. restart_all
3. In cataloge go to a book and place many holds
CHECK => Holds table shows a column of checkboxes
4. Play with checkboxes (have some fun ;-P)
CHECK => When you manually check all checkboxes, the checkbox in the
header also gets checked.
=> When you uncheck one of the checkboxes, the one in the header also gets unchecked.
=> If no checkbox is checked and you check the one in the header,
all checkboxes get checked.
=> If there are some checkboxes that are checked and others are
not, when you click on the checkbox in the header all checkboxes get
unchecked.
=> If all checkboxes are checked, when you uncheck the one in the
header, all checkboxes get unchecked.
=> Every time you play with checkboxes, the number in the button
"Cancel selected" changes.
5. Check some of the checkboxes and click on cancel selected.
SUCCESS => A background job gets fired to cancel all selected holds.
=> A message should appear with a link to the job.
6. Wait a few seconds and click on the link
SUCCESS => A message appears with the report of the execution of the
background job.
7. Grab a patron and search to hold
8. Select multiple biblios and click on "place hold for <patron>"
CHECK => After holds are confirmed, multiple holds table are shown.. one for
each record. Checkboxes work exactly the same as before, but scoped
for each individual table. Checkboxes from one table will not affect
checkboxes from other tables.
9. Repeat steps 4 to 6.
10. Check In some of the items so the get in Waiting state.
11. Update expirationdate os some of those holds and set it to
ReservesMaxPickUpDelay + 1 days earlier
NOTE => ReservesMaxPickUpDelay = 7 days by default, so sql syntax to update would be
=> update reserves set expirationdate = date_sub(expirationdate, interval 8 day) where reserve_id in (...)
12. Repeat steps 4 to 6 but in waitingreserves.pl, in both tabs.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing template filter
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing filters
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Use correct indentation
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
JD amended patch: also Koha/BackgroundJob/BatchCancelHold.pm
JD Amended patch: Full rebase and adjustements made on top of bug 26080.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the use of jQueryUI's datepicker on circulation and
patron-related pages.
The patch modifies Flatpickr's default configuration (in calendar.inc)
so that it has the following features:
- A Flatpickr input with a "futuredate" class will require that the
selected date be after today.
- The Flatpickr input field will be wrapped in a container to
facilitate better CSS styling.
- Generic handling of paired date fields is enabled using
".flatpickrfrom" and ".flatpickrto" field classes. This mimics the
same feature we have for jQueryUI datepickers using ".datepickerfrom"
and ".datepickerto".
This patch also removes an unused function which was repeated in three
templates: validate1.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Circulation and check out to a patron.
- Open the Restrictions tab and click "Add manual restriction."
- In the "Expiration" field, test that the Flatpickr widget works
correctly and limits to dates after today.
- Enable the SpecifyDueDate preference if necessary.
- Test the behavior of the SpecifyDueDate controls: Setting a date,
clearing a date, session persistence.
- Enable the SuspendHoldsIntranet system preference if necessary.
- Check out to a patron with existing holds.
- Open the Holds tab and click the "Suspend" button for one of the
holds.
- In the modal window which appears, check that the Flatpickr
widget works correctly and limits to dates after today.
- At the bottom of the table of holds, test that the "Suspend all
holds" Flatpickr works correctly and limits to dates after
today.
- Perform this same test from the patron details page.
- Enable the BatchCheckouts system preference if necessary.
- Open a patron record and click "Batch check out" in the left-hand
sidebar menu.
- Test that the "Hard due date" Flatpickr works correctly as a date
and time picker.
- Go to Circulation -> Overdues.
- Test that the date due filters in the sidebar work correctly and
are linked, e.g. the "to" field cannot be before the "from" field.
- Perform the same test here: Circulation -> Holds to pull; and
here: Circulation -> Hold ratios.
- Enable the HouseboundModule system preference if necessary.
- Check out to or view details of a patron.
- Click "Housebound" in the sidebar menu.
- Save delivery day and frequency settings for that patron.
- Click "Add a new delivery."
- Test that the "Date" Flatpickr widget works correctly.
- Go to Patrons -> A patron record -> Edit.
- Test that Flatpickr widgets work on the following fields:
- Date of birth
- Registration date & Expiration date (linked).
- Patron restrictions -> Add manual restriction -> Expiration.
- View a bibliographic record and start the process of placing a hold.
- After selecting a patron, test the "Hold starts on" and "Hold
expires on" date fields. The fields should be linked and each
should limit to future dates.
- Confirm that the dates are saved correctly when you submit the
hold.
- Locate a bibliographic record with multiple holds and view the holds.
- In the table of holds, test each date field: Date, expiration, and
suspend-until.
- Test that Flatpickr's static "formatDate" method is working
correctly:
- Locate a bibliographic record's item so that there is text in both
the "Public note" and "Non-public note" field.
- Check that item out to a patron.
- After the page reloads the public and non-public notes should be
shown under the checkout title highlighted in red.
- Check for references to a "validate1" function. There should be none.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
While moving the dropdown to a block, I noticed the page size was very large when there are many holds
This patch chomps a large amoutn of whitespace, from the block and elsewhere and drecreased the paeg from about 400k lines to 25k lines for a record with ~200 holds
To test:
1 - Apply previous patch
2 - Load holds tab for a biblio
3 - Save the page as html from your browser, note the size of the file
4 - Apply patch this
5 - Reload and repeat
6 - Note the size is much smaller
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes a few changes:
1 - If we are not splitting the queue ( HoldsSplitQueue == 'nothing' ) then
there are no changes for 'virtual' vs 'actual' numbering
2 - If we are splitting the queue you cannot use the dropdown, so we do not need to process the options
3 - If the hold is 'found' we do not need to process the options
4 - We can simply use the 'last priority' to build the options, we do not need to process in the script
5 - We can use a block to build the options
6 - Remove a stray holds.index
To test:
1 - Place 5 holds on a bib
2 - 'Find' two of the holds i.e. check them in to set status to 'transit' or 'waiting'
3 - View the holds page for the biblio
4 - Inspect the priorty dropdown for the found holds, note they have options for 1-5 but are disabled
5 - Note the dropdowns for other holds have options 1-5
6 - Note options 4&5 in the dropdowns have no effect
7 - Apply patch
8 - Inspect the priority dopdowns on the found holds
9 - Note they only show their found status
10 - Note the other dropdowns only show options 1-3
11 - Test with other HoldsSplitQueue options and HoldsSplitQueueNumbering
12 - When holds queue is split, no dropdowns should be active and should show only their current priority
13 - When HoldsSplitQueueNumbering is 'virtual' the dropdown should be disabled and correctly count the number of unfound holds in the list
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
JK: Fixed grammar in commit title
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
JD: Remove trailing 'i'
Bug 29049: (QA follow-up) Remove excessive whitespace
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the QA tools happy and follows correct procedures for passing data to
and rendering data from the api
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Place a number of holds on a record
2 - Have different pickup locations for the holds
3 - Have some libraries that are not pickup locations
4 - Load the holds tab for the record and note libraries not pickup locations are not in dropdowns
5 - Apply patch and restart all things
6 - Reload the holds table
7 - Click on a dropdown, note the spinner, should load successfully
8 - Confirm the dropdown matches the options before the patch
9 - Confirm updating the hold location works
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When an item is checked in and marked 'Waiting' or already 'Waiting'
and there is a desk attached to the session, the item is marked
waiting at the current desk of the current library.
The information is displayed on the OPAC and on the intranet. The
patron can then know at which desk he can retrieve his document.
Desk Management (Bug 13881) is now useful.
Test plan :
1. apply Bug 24201
2. $KOHA_PATH/installer/data/mysql/updatedatabase.pl
3. Check out some document to someone
4. make another one reserve this document
5. check in the document
6. you can see the document is attach to the current library
7. create some desks and attach one to your session (see Bug 13881 and
Bug 24201)
8. cancel the preceding reserve and redo steps 3 to 5
9. you should see the document is waiting at the current library and
current desk on:
a. the intranet document request page
b. the intranet borrower holds tab
c. the item list where the document is listed on the bibliographic
details
d. the borrower's OPAC holds tab.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) QA
Following Josef Moravec QA comments :
- rewrite Koha::Hold->desk according to Object Oriented Koha
Guidelines and use it to fetch desk name in various templates
- remove unused Desks.GetName
- Check for columns existence in db update
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) QA: useless change
Maybe it was a relic of something usefull... anyway
not anymore.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) Fix POD
Koha::Desk and not Koha::Library...
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds new syspref, HoldsNeedProcessingSIP, which controls whether
a hold that is related to item will be filled automatically or not. If
the user has enabled the syspref then instead of fulfilling the hold
automatically the hold will go to "in processing" state.
To test:
1. Checkout a book to patron A
2. Place a bib level hold to the book for B
3. Patron A returns the book via SIP, to simulate this use:
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --item <ItemBarcode> -m checkin
4. Notice that no notification is generated for Patron B about hold
and that the hold status in intranet and opac is "In Processing".
5. Notice that patron A (or other patrons) cannot checkout a book
that is in processing, because it is considered to be attached to
the holdee (similarly to the waiting state):
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --patron <PatronABarcode> --item <ItemBarcode> -m checkout
Signed-off-by: Timothy Alexis Vass <timothy_alexis.vass@ub.lu.se>
Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 25789 changed holds tables expriration input class as "datepickerto".
This results to past expiration date to be displayed as tomorrows date.
Class "futuredate" should have been used instead.
To test:
1. Have waiting hold with expiration date in past (e.g 24.9)
2. Observe that waiting reserves table displays correct expiration date
3. At the request.pl page expiration date is however displayed as 26.9
=> Apply patch
4. Confirm that expiration date at the request.pl is now 24.9
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch set attempts to replace all the <i> tags with <em> and all
the <b> tags with <strong> in the staff interface.
I attempted to get all the templates, includes, and xslt files.
To test:
1. Review the changes as best as possible, looking for mistakes.
2. grep for <i> and <b> in the modules, includes, and xslt folders. You should get nothing/
3. If you grep '<\/i>' you should only see instances of Font Awesome.
4. If you grep '<\/b>' you should only see instances where caret is used.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Remove the unordered list added to the holds list Details column
- Switch div to span to have the hint appear behind the checkbox
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch
* sets one check for reserves and another for old_reserves in
atomic update
* Adds a message below the checkbox and adds detail when a hold is non
priority
* Fixes issue when there are more than one hold, but the first is non
priority
* Adds test case for this last scenario
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to be able to cancel a hold with the option to
specify a reason. Providing a reason would generate an email to that
patron.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Create new AV category "HOLD_CANCELLATION", add some cancelation reasons
5) Add new Holds module notice "HOLD_CANCELLATION", add an email version.
A quick test version would be "Reason: <<reserves.cancellation_reason>>"
--
[% USE AuthorisedValues %]
Reason: [% AuthorisedValues.GetByCode( 'CANCELLATION_REASON', hold.cancellation_reason, 'IS_OPAC' ) %]
[% IF hold.cancellation_reason == "MY_AV_VALUE" %]
IF perhaps you'd like to have a much longer explanation than just the
one sentence in the AV description, you can use IF blocks using Template
Toolkit markup!
[% END %]
--
6) Place a hold for a patron
7) On request.pl, select the 'del' option for the hold
8) Select a cancellation reason and choose "Update hold(s)"
9) Note a new message has been queue for the patron with the cancelation reason
11) Test again from circulation.pl
12) Test again from moremember.pl
10) Cancel a hold with no reason, note no email is generated
11) Delete your authorised values, not the feature is disabled
12) Reinstate the authorised values, but delete the notice,
you should now be able to cancel a hold with a reason,
but no email will be generated
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When editing existing holds expiration date it's possible to select
past date from datepicker. This patch changes expiration inputs class
as "datepickerto" to make past dates unselectable.
To test:
1. Find item with holds
2. Edit holds expiration date
=> Note that past dates are selectable
3. Apply patch
4. Edit again
=> Past dates are no longer selectable
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In a hold note, line breaks are not preserved when viewing the note. A
note like:
--
Test 1
Test 2
--
will be rendered as:
--
Test 1 Test 2
--
Test Plan:
1) Place a hold with a note, use line breaks in the note.
2) Note the lines all run together when viewing the hold.
3) Apply this patch.
4) Reload the page.
5) Notes should now display with the original line breaks!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
On request.pl, the table of holds shows a suspend_until date picker for each hold, *unless* that hold is waiting or in transit. The script reserve/modrequest.pl assumes that there will be a suspend_until input for each hold, but that is incorrect. Assume there are 20 holds on a record, and 10 of them are waiting or in transit. If you were to then set the suspend until date on the 10 open holds, and use the "Update hold(s)" button, those 10 suspensions would apply to the 10 found holds and not the holds they should apply to!
Test Plan:
1) Place two holds on a record
2) Check in an item and trap it for the first hold
3) Now that one hold is waiting and the other is not, attempt to set
a suspension date using the "Update hold(s)" button
4) Note your hold does not get suspended!
5) Apply this patch
6) Restart all the things!
7) Repeat steps 1-3
8) Your hold should now be suspended!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch filters pickup locations per item in holds_table.inc
To test:
1) Go to Circulation and fines rules and change max holds allowed to > 0, and change 'Hold pickup library match' to homebranch
2) Search for a patron
3) Click on "Search to hold"
4) Search for any bilio
5) Place hold on a specific item
CHECK => Item's pickup location is a select with all libraries
6) Apply this patch
7) Repeat steps 2 to 5
SUCCESS => Item's pickup location is filtered by allowed pickup locations
8) Sign off
Sponsored-by: VOKAL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a "size" attribute to the datepicker input fields and
adds self-closing "/".
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
