Removes last remaining bit of configuration for the Titles facet
configuration.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some Sami languages need few more characters to be mapped, or
are otherwise very hard to search for.
Test plan:
1) Catalogue a new record with title "Ǩoǯeŋa"
2) Make sure zebra indexed that record, then try to search for
it with the text "kozena"
3) Apply patch
4) Redo 2, now the record should be found.
Signed-off-by: Pasi Kallinen <pasi.kallinen@koha-suomi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Missing entries are added to those files.
Test plan:
Search for typos
Compare the two files and comfirm the entries are the same in both.
Exception: supportdir exists in etc/koha-conf.xml only, but I think it's
obsolete.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Koha has a number of features that rely on knowing the IP address of the connecting client. If that server is behind a proxy these features do not work.
This patch adds a module to automatically convert the X-Forwarded-For header into the REMOTE_ADDR environment variable for both CGI and Plack processes.
TEST PLAN:
1) Apply this patch set
2) Install Plack::Middleware::RealIP via cpanm or your favorite utility
3) Update your plack.psgi with the changes you find in this patch set ( this process differs based on your testing environment )
4) Restart plack
5) Tail the plack error log for your instance
6) Use curl to access the OPAC, adding an X-Forwarded-For header: curl --header "X-Forwarded-For: 32.32.32.32" http://127.0.0.1:8080
7) Note the logs output this address if you are unproxied
8) If you are proxied, restart plack using a command like below, where the ip you see in the logs ("REAL IP) is what you put in the koha conf:
<koha_trusted_proxies>172.22.0.1 1.1.1.1</koha_trusted_proxies>
9) Restart all the things!
10) Repeat step 6
11) You should now see "REAL IP: 32.32.32.32" in the plack logs as the remote address in your plack-error.log logs!
12) Disable plack so you are running in cgi mode, repeat step 6 again
13) You should see "REAL IP: 32.32.32.32" as the remove address in your opac-error.log logs!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Ed Veal <eveal@mckinneytexas.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
directory _LOG_DIR_/logs does't exists.
All other log4perl -logs are out to _LOG_DIR_
Thank you for the good work Ere!
Signed-off-by: Stefan Berndtsson <stefan.berndtsson@ub.gu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Splits Session to GenericSession and ZebraSession where Generic supports any
search backend via the SearchEngine classes and Zebra maintains the direct
channel to the Zebra server.
Adds config files required for mapping BIB-1 attributes to Koha search fields
and SRU indexes to BIB-1 attributes.
Adds PODs.
Sponsored-by: National Library of Finland
Signed-off-by: Stefan Berndtsson <stefan.berndtsson@ub.gu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This creates a new daemon, misc/z3950_responder.pl, which can respond to
Z39.50 requests. By default, it just proxies searches to Zebra.
If desired, however, it can also add a subfield to the item tags on
outgoing records with a textual description of the item's status
(checked out, lost, etc.). This is useful for certain ILL systems. These
strings can be translated using the 'Z3950_STATUS' authorized value.
Test plan:
1) Start the Z39.50 server using `perl misc/z3950_responder.pl`.
2) Connect to the server using `yaz-client 127.0.0.1:9999/biblios`.
3) Run a search, such as `find @attr 1=1016 book`.
4) Fetch the results both one at a time with `show 1` and in a batch
using `show 1+5`.
5) Turn on MARCXML using `format xml` and `elements marcxml`, and
verify that the records are still correctly fetched.
6) Enable the item status subfield by restarting the server with the
option `--add-item-status=k`.
7) Search for and fetch records, and verify that a $k subfield is
added to the item tags as appropriate. It should show some
combination of "Checked Out", "Lost", "Not For Loan", "Damaged",
"Withdrawn", "In Transit", or "On Hold" as appropriate, or
"Available".
8) Add an authorized value named "Z3950_STATUS" with any of the keys
"AVAILABLE", "CHECKED_OUT", "LOST", "NOT_FOR_LOAN", "DAMAGED",
"WITHDRAWN", "IN_TRANSIT" or "ON_HOLD", and verify that their
descriptions are used instead of the default values above.
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Stefan Berndtsson <stefan.berndtsson@ub.gu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Missing installer for debian packages.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Johanna Raisa <johanna.raisa@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The example SIP config file in Koha is kind of a kitchen sink document where
all available SIP2 options should be demonstrated.
The allow_empty_passwords flag should be included in it.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should be able to set system preference overrides for SIP in a
similar manner that we do in Apache. It would be great if we could
specify those overrides on both a config level, and login level basis.
Test Plan:
1) Apply this patch
2) Start your SIP server
3) Enable the syspref AllFinesNeedOverride
4) Find or create a patron with a small fine ( less than noissuescharge )
5) Attempt to check out an item to the patron, it should fail
6) Add the global syspref override from the bottom of the example SIP config file
7) Restart your SIP server
8) Attempt to check out an item to the patron again, this time it should work
9) Now, add the login level syspref override section as it appears in
the eaxmple SIP config file. Make sure to add it to the login you are using
10) Attempt to check out another item to the patron, this time is should
again fail
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some libraries would like to limit the amount of personal information a SIP server sends
to arbitrary parties on a per-login basis.
Test Plan:
1) Add a new key/value pair to one of your existing login stanzas in your SIP config file
For example: hide_fields="BD,BE,BF,PB"
2) Restart SIP
3) Send a SIP message that would normally return those fields ( in this example, a Patron Information Request )
4) Note the response has had those fields removed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Davis <tubaclarinet@protonmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Add a record with a unique publisher "Supercalifragilistic" in the
264 b field
2 - Search for the value
3 - Record not found
4 - Apply patch (may need ot copy the .xml file into koha install)
5 - Reindex all the things
6 - Search for the value
7 - Success!
Signed-off-by: Felicia Martin <felicia.martin@dncr.nh.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If the alternative mana KB server URL in etc/koha-conf.xml is used it
causes an error message like 'malformed JSON string, neither tag,
array, object, number, string or atom, at character offset 0 (before
"<html>\r\n<head><tit...") at /usr/share/perl5/JSON.pm line 171.' when
submitting an account creation request, and the account creation
request fails.
This patch updates the alternative mana KB server URL in
etc/koha-conf.xml from http://mana-test.koha-community.org to
https://mana-test.koha-community.org (the URL should start with https
instead of http). If the updated URL is used the account creation
request succeeds without causing any error messages.
To test:
1) Add <mana_config>http://mana-test.koha-community.org</mana_config> to
/etc/koha/sites/<instancename>/koha-conf.xml (see etc/koha-conf.xml
in the Koha code repository for an example of where to add this;
<instancename> if using koha-testing-docker is kohadev).
2) Clear memcached and restart services so that the changes to your Koha
instance configuration are recognised (if using koha-testing-docker
run flush_memcached and then restart_all).
3) From the staff client home page go to Koha administration >
Additional parameters > Share content with Mana KB.
4) Enable content sharing: change 'Use Mana KB for sharing content' to
Yes and press Save.
5) Enter your first name, last name and email address in the Configure
Mana KB section of the page and then click on 'Send to Mana KB'.
6) An error message is displayed, this may be something like:
'malformed JSON string, neither tag, array, object, number, string
or atom, at character offset 0 (before "<html>\r\n<head><tit...") at
/usr/share/perl5/JSON.pm line 171.'
7) Change the mana server URL to https://mana-test.koha-community.org
(see step 1), and repeat steps 2, 3 and 5.
8) Instead of an error message you should get 'You successfully created
your Mana KB account. Check your mailbox and follow instructions.'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Define a matching rule for authorities on field 001 index Local-Number
2 - In koha-conf.xml raise the zebra_loglevels
<zebra_loglevels>none,fatal,warn,request,info</zebra_loglevels>
3 - Export some authorities using the tools->export data
4 - Import those authorities
5 - Note no matches found
6 - View the zebra output log, you should see lots of error 114
7 - Apply patch
8 - Copy the indexdefs files to the installed versions
9 - Reapply matchign rules to staged files
10 - Matches should now be found
11 - Logs should not have errors
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
'Static' is the default value of Search::Elasticsearch and for a good
reason : it works in most cases, unlike the 'Sniff' option
To test:
1 - Apply patch
2 - Edit koha-conf.xml
3 - Add '<cxn_pool>Static</cxn_pool>' to the elasticsearch stanza
4 - Restart all the things!
5 - Reindex ES, it works
6 - Set SearchEngine to ES, try searching
7 - It works!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Do not apply the patch
1) Add some word with character "ů" into metadata, for example author "Martinů, Bohuslav"
2) Try to search it with "Martinu" and you'll see you can't find it
3) Apply the patch
4) Copy file etc/zebradb/etc/word-phrase-utf.chr to your /etc/koha directory
sudo cp etc/zebradb/etc/word-phrase-utf.chr /etc/koha/zebradb/etc/
5) koha-zebra --restart kohadev
6) koha-rebuild-zebra -f kohadev
6) try to search "Martinu" again - you should be able to find your record
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Also modifies the log4perl.conf to lazy-open filehandles to log files,
so the same config can be used with log-files needing different
permissions.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Based on original patches by Kyle Hall and additions by Olli-Antti
Kivilahti.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a CT field to be sent, even if that field is empty. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option ct_always_send for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP, which will not be transferred
5) Note the response contains a CT field with no value
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a checkin success to return a CV field of the value "00" rather than no CV field at all. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option cv_send_00_on_success for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP
5) Note the response contains a CV field with the value '00'
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Find or add a record by author Slavoj Žižek
2 - Search for 'Zizek'
3 - No results
4 - Apply patch
5 - Reindex
6 - Search again
7 - Success!
https://bugs.koha-community.org/show_bug.cgi?id=22073
Signed-off-by: Eric Phetteplace <ephetteplace@cca.edu>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Apply first patch
2 - Attempt searching by arp, no results
3 - Apply this patch
4 - Copy bib1.att and ccl.properties to the correct locations
5 - Restart zebra
6 - Rebuild indexes
7 - Search agian, success!
Signed-off-by: Margie Sheppard - Central Kansas Library System CKLS <msheppard@ckls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Since we now require the <branch> block, we should add it to the config
templates
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove:
- BIB_INDEX_MODE and AUTH_INDEX_MODE env var
- bib_index_mode and auth_index_mode options from scripts
- Warnings from about page, just kept one if zebra_bib_index_mode or
zebra_auth_index_mode still exist in config and are set to grs1
Test plan:
- Install Koha from src
- Install Koha from pkg
- Read the code, carefully!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The Rewrite rules for Apache don't work unless you're using
debian/templates/apache-shared-opac-plack.conf or
debian/templates/apache-shared-intranet-plack.conf.
This patch fixes the Rewrite rules for the non-Plack Debian
Apache configuration templates as well as the standard
Apache configuration file that comes with Koha.
__BEFORE APPLYING__
1. Visit /api/v1/app.pl/api/v1/spec on your git dev install
2. This should display a large page of JSON
3. Visit /api/v1/spec on your git dev install
4. This should generate a 404 error
__APPLY PATCH__
__AFTER APPLYING__
5. Visit /api/v1/app.pl/api/v1/spec on your git dev install
6. This should display a large page of JSON
7. Visit /api/v1/spec on your git dev install
8. This should display a large page of JSON (identical to
the one from earlier steps)
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA with few notes posted separately to Bugzilla.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the index definitions for zebra faceting of ccode in
koha for marc21, normarc and unimarc.
We also add lines to the templates to expose the new facet and enable
non-zebra faceting for ccode too.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 20073: Move Elasticsearch yaml files back to admin directory
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20187 has changed the JS and CSS rewrite rules to :
RewriteRule ^(.*)_[0-9][0-9]\.[0-9][0-9][0-9][0-9][0-9][0-9][0-9].js$ $1.js [L]
RewriteRule ^(.*)_[0-9][0-9]\.[0-9][0-9][0-9][0-9][0-9][0-9][0-9].css$ $1.css [L]
This patch changes this rules using [0-9]{N} and fusion in one rule.
And espaces the dot in extension js and css.
Test plan :
1) Go to intranet and opac
2) Check CSS and JS are doing well
3) Apply patch changes on our Apache configuration
4) Reload intranet and opac pages (Ctrl + F5)
5) Check CSS and JS are doing well
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This reverts commit f489d2034b.
This commit breaks the install process when using debian packages.
Reverting as we are very close to the 18.05.00 release
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an option to the koha-conf.xml file for specifying
a temporary uploaded files directory.
The koha-create script is adjusted to handle it and a convenient option
switch is added. If ommited, it will default to
/var/lib/koha/<instance>/uploads_tmp.
koha-create-dirs is patched to create the required directory with the
right permissions.
The docs get the new parameter documented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It implements only the "client credentials" flow with no scopes
support. API clients are tied to an existing patron and have the same
permissions as the patron they are tied to.
API Clients are defined in $KOHA_CONF.
Test plan:
0. Install Net::OAuth2::AuthorizationServer 0.16
1. In $KOHA_CONF, add an <api_client> element under <config>:
<api_client>
<client_id>$CLIENT_ID</client_id>
<client_secret>$CLIENT_SECRET</client_secret>
<patron_id>X</patron_id> <!-- X is an existing borrowernumber -->
</api_client>
2. Apply patch, run updatedatabase.pl and reload starman
3. Install Firefox extension RESTer [1]
4. In RESTer, go to "Authorization" tab and create a new OAuth2
configuration:
- OAuth flow: Client credentials
- Access Token Request Method: POST
- Access Token Request Endpoint: http://$KOHA_URL/api/v1/oauth/token
- Access Token Request Client Authentication: Credentials in request
body
- Client ID: $CLIENT_ID
- Client Secret: $CLIENT_SECRET
5. Click on the newly created configuration to generate a new token
(which will be valid only for an hour)
6. In RESTer, set HTTP method to GET and url to
http://$KOHA_URL/api/v1/patrons then click on SEND
If patron X has permission 'borrowers', it should return 200 OK
with the list of patrons
Otherwise it should return 403 with the list of required permissions
(Please test both cases)
7. Wait an hour (or run the following SQL query:
UPDATE oauth_access_tokens SET expires = 0) and repeat step 6.
You should have a 403 Forbidden status, and the token must have been
removed from the database.
8. Create a bunch of tokens using RESTer, make some of them expires
using the previous SQL query, and run the following command:
misc/cronjobs/cleanup_database.pl --oauth-tokens
Verify that expired tokens were removed, and that the others are
still there
9. prove t/db_dependent/api/v1/oauth.t
[1] https://addons.mozilla.org/en-US/firefox/addon/rester/
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Removed merge marker
- Changed include path in favor of using the Asset tt plugin (bug 20538)
- Changed access_dir to a two-level entry for clarity
Test plans stay the same, just make sure that the two-level configuration entry
work properly and everything pass QA.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This squash contains all of these commits:
- Adds a page to access log files on the server from the intranet
- Update ID to allow for permalinking
- Rename config to "'accessdir' and fix qa
- Allows for multiple directories to be accessible
- Update the link under reports
- (Follow-up) Fixing merge error and cosmetic changes
- (Follow-up) Fix tab chars and move javascript to the footer
- (QA Follow-up) Fix datatable
- Make filename unicode-proof, renamed accessdir to access_dir and fix update
Test plans:
- Apply patch, update database
- Add to koha-conf:
<access_dir>/tmp/koha-public/one</access_dir>
<access_dir>/tmp/koha-public/two</access_dir>
<access_dir>/tmp/koha-public</access_dir>
- Create these directories ( mkdir /tmp/koha-public , etc...)
- Create these files:
echo "hello world!" > /tmp/koha-public/❤
echo "test" > /tmp/koha-public/one/samename.txt
echo "this is not the same" > /tmp/koha-public/two/samename.txt
- Login as Superadmin, go to tools > reports files
- Click on ❤, make sure it's downloadable and readable
- Click on both samename.txt, look inside and make sure the file is different
- Login as NON-superadmin. Go under tools, see no Report/Log under the third column
- Go to add tools/access_file permission to user
- See new entry under tools third column.
- validate link is ok.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
