To test:
1) Apply patch, update database, rebuild schema file
2) Restart koha-common and memcached
3) Confirm that your user has an email address.
4) Confirm that your library does NOT have an email address.
5) Confirm that syspref KohaAdminEmailAddress and syspref ReplytoDefault are not filled. Enable the OPACReportProblem syspref.
6) Log into OPAC
7) Click the 'Report a problem' link at the bottom of whatever page
you're on
8) Notice that there is no form is and there is an error message alerting that reports cannot be submitted
9) Add an email address for your library (in either the email field or the replyto field). Refresh the OPAC problem report page. The form should now show, and the recipient field should say 'library'.
10) Complete the form and submit. Check the message_queue in the database and confirm the to_address is correct. Confirm there is a success message.
11) Add an email address for the syspref KohaAdminEmailAddress and refresh the OPAC problem report page again. The recipient field should now be a dropdown. Select the Koha Administrator option.
12) Complete the form and submit. Check the message_queue in the database and confirm the to_address is the value in KohaAdminEmailAddress. Confirm there is a success message.
13) Ensure all details in the message_queue are correct.
14) Log out of the OPAC
15) Click the Report a problem link again and confirm you are forced to log in
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adding problem_reports table and OPACReportProblem syspref
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When selecting partners for search during the "Place request with
partner libraries" workflow, there was no indication of which partners
could actually be searched (i.e. are attached to a Z target and enabled
for partner search). We now list them
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We now allow for the service to return a name that can be specified in
the plugin config. This patch switches to using that, rather than just
the plugin name defined in the plugin's metadata hashref
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the required infrastructure to enable ILL availability
plugins to intercept the request creation process and, using the
supplied metadata, search for and display possible relevant items from
whichever availability plugins are installed.
Currently three availability plugins exist:
z39.50 - Searches any number of the Koha instance's configured Z targets
https://github.com/PTFS-Europe/koha-plugin-ill-avail-z3950
EDS - Searches the EBSCO Discovery Service
https://github.com/PTFS-Europe/koha-plugin-ill-avail-eds
Unpaywall - Searches the Unpaywall API for possible open access versions
of the requested item
https://github.com/PTFS-Europe/koha-plugin-ill-avail-unpaywall
The Unpaywall plugin is intended to serve as a "reference" plugin as the
API it deals with is extremely simple
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the new syspref "ILLCheckAvailability"
Sponsored-by: Public Health England
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The issue appears to be that the default action is not prevented for middle click because it registers
an 'auxclick' event as opposed to a 'click' event
To test:
1 - Perform a search in staff client
2 - Shift-click and hold on a result
3 - Note a new tab opens
4 - Release the click, no change
5 - Middle click and hold on a result
6 - New tab opens
7 - Release, a second new tab opens
8 - Apply patch
9 - Reload page
10 - Middle click and hold
11 - New tab opens
12 - Release
13 - No new tab
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
admin/add_user_search.pl sets 'patrons_with_acq_perm_only', to only
retrieve patrons with acq (order_manage) permissions.
The original bug was hidden in the existing code, but the behavior was
terrible.
To prevent patrons matching the permissions contrainst to be hidden, we
fetched ALL the patrons from the DB, then filtered them depending on
their permissions. This might have awful performance on DB with lot of
patrons.
So basically with this patch we are adding the pagination back to the
"owner/users for funds" feature, as the permission filtering is now done
at DB level.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At the moment noItemTypeImages pref controls staff and OPAC
display. With this patch, there will be a separate OpacNoItemTypes
preference that allows to control display of each separately.
To test:
- Apply patch and run database update
In Administration:
- Search for 'noItemTypes' preferences
- Verify the settings of both prefs match
- Toggle prefs, verify everything works ok
- Go to the item types configuration page
- Try different settings for both prefs:
- Both set to No: Only a message with a link to the prefs should show
- Both set to Yes or either set to Yes: image configuration options
should show
In the OPAC:
- Check the following pages with item-level_itypes = record
- advanced search
- detail page
- place hold page
- Check the following pages with item-level_itypes = item
- result list
- a list (opac-shelves)
- checkouts and overdues tabs in patron account
(Note: this didn't work right before, but will now.)
- reading history in patron account
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Librarians should be able to define what sections in member entryfields in 'Main address',
'Contact' and 'Alternate contact' in member entry form for guarantee's are pre-filled from guarantor's record
The 'Guarantor surname, 'Guarantor first name' and 'relationship' fields
in the 'Contact' section should not be filled from guarantor patron
record as those fields are intended for guarantor's without patron
records in Koha.
Test plan:
1. On an adult patron's record (which has all fields filled out in the
'Main address', 'Contact' (Except for 'Guarantor surname', 'Guarantor
first name', and 'relationship'), 'Alternate address', and 'Alternate contact') select 'Add guarantee'
2. Observe:
* Fields in 'Main address' are all automatically pre-filled
from guarantor record
* Fields in 'Contact' (except 'Guarantor surname', 'Guarantor firstname'
and 'relationship') are all automatically pre-filled from guarantor
record
* Fields in 'Alternate address' (except for Contact note) are pre-filled from guarantor record
* None of the fields in 'Alternate contact' are pre-filled from guarantor
4. Apply patch
5. Run database updates
cd installer/data/mysql
sudo koha-shell <instancename>
./updatedatabase.pl
6. Restart plack:
sudo koha-plack --restart <instancename>
7. Go to Administration > Global system preferences and search for the
new PrefillGuaranteeField system preference
8. Observe this syspref contains checkboxes and the following are
selected by default:
Contact - Primary email
Contact - Primary phone
Main address - Address
Main address - City
Main address - Country
Main address - State
Main address - ZIP/Postal code
Main address - street number
Please note: 'Contact - Guarantor surname', 'Contact - Guarantor first
name', Contact - relationship' are not in PrefillGuaranteeField syspref
as they are for non Koha patrons and so should not be pre-filled from a Koha
patron.
9. Repeat step 1 and observe the following fields are prefilled from guarantor:
In Main address section -
streetnumber
address
city
state
zipcode/postal code
country
In Contact section -
Primary phone
Primary email
10. In the PrefillGuaranteeField syspref click '[Select all]' checkboxes
11. Repeat step 1 and observe all fields in 'Main address', 'Contact'
(except Guarantor surname, Guarantor first name, and relationship),
Alternate address and Alterate contact are filled from guarantor record.
i.e. The values in guarantor's 'Alternate address' fields fill the
guarantee's 'Alternate address' fields
12. Change a few of the prefilled field values and 'Save' and observe your changes
have been saved in addition to the unaltered pre-filled values in other
fields
13. Amend PrefillGuarantee field syspref to have no checkboxes selected
14. Repeat step 1 and observe none of the fields in Main address,
Contact, Alternate address and Alternate contact are pre-filled
15. Run tests:
sudo koha-shell <instancename>
prove xt
prove t
Sponsored-by: Waitaki Distict Council, NZ
Signed-off-by: Sally <sally.healey@cheshiresharedservices.go.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same change as in bug 24697 for staff. If there are more URIs in 952u,
we split them and show the real URL instead of Link to resource or the
value of pref URLLinkText.
I introduced a few template variables here to make the code a bit more
compact and readable.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a hold is selected from the result list, we should let the ability to
select an item-level hold.
Test plan:
I. Detail page
1/ Go to a bibliographic record detail page
2/ Click "Place hold"
3/ Select a patron
=> No change expected, you can select an item
II. Search result, multiple holds
1/ Search for an item with more than one search result
2/ Select several items, click 'Place hold'
3/ Enter a patron card number
=> No change expected, item level holds are not available.
III. Search result, single hold
1/ Search for an item with more than one search result
2/ Select only one item, click 'Place hold'
3/ Enter a patron card number
=> With this patch applied, item level hold is available. The screen is the same
as when you place a hold from the bibliographic record detail page
=> Without this patch you cannot place an item-level hold
QA notes: We could go a bit further and remove the 2 biblionumbers and
biblionumber from hold script, as well as remove the checkMultiHold in
request.tt. We should not have a biblionumbers param that contain a list
of biblionumber separated by '/' but several biblionumber parameters
instead.
QA notes 2: About placerequest.pl, see bug 19618 comment 27.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When selecting a new hard due date, we should keep the time part of the
original checkouts.
Test plan:
1 - Checkout an item specifying a date due
2 - Checkout an item without specifying a date due
3 - Use Tools->Batch extend due date
4 - Select a hard due date
5 - On the confirmation screen you should see that the time part has
been kept
6 - Confirm
7 - Make sure the correct values hava been inserted in DB
8 - Try now using the other option, give a number of days
9 - Repeat 4-7
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch corrects an error in the structure of the authority editor
template so that repeating subfields do not generate invalid markup. The
correction was found by comparing with addbiblio.tt.
If you are viewing the diff, please note that some minor whitespace
changes have been made.
To reproduce, clone and and populate any repeatable subfield, save, and
open the authority for editing again. The clones subfield will be
formatting incorrectly, showing bullet points on each line.
To test, apply the patch and reload the authority editor showing the
record with the cloned subfield. It should display correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes a minor correction to the markup of the OPAC search
results page so that the event handlers attached to the checkboxes work
correctly. The broken markup broke the jQuery selector used to control
the event.
An extra </div> was added by mistake by Bug 14715.
To test, apply the patch and test the process of selecting multiple
titles by checking the checkbox. Doing so should activate the "Place
hold" and "Tag" controls.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Create or have a branch with code CPL
2 - Create two new branches 'ACPL' and 'CPLA'
3 - In branch transfer limits disallow some itype or collection from another branch (FPL) to ACPL and CPLA
4 - Set UseBranchTransferLimits to 'Enforce'
5 - Find a biblio with one item belonging to FPL
6 - On opac, attempt to place a hold
7 - Note that ACPL and CPLA don't show in dropdown, OK
8 - Note that CPL is disabled, NOT OK
9 - Apply patch
10 - Place hold
11 - CPL is now enabled
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When there are mulitple 583 on a record, the label "Action note" will be
repeated for each. This fixes it, so that the label only appears once and
multiple fields are separated by | following the existing pattern.
Also makes sure there is a space between $z and other subfields.
Note:
Ind. 1 = private - These won't display in the OPAC
Ind. 1 = 0 or empty - These will display in the OPAC
Staff will display all 583 independent from indicator.
To test:
- Add one or more records with none, one and muliple 583, at least one including $z
For examples see:
http://www.loc.gov/marc/bibliographic/bd583.html
- Verify display problems
- Apply patch
- Verify display is improved - one label and $z is followed by a space
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This fixes a typo in the debit type description of
RENT_DAILY_RENEW
1) Go to Administration > Debit types
2) Show all debit types
3) Check for the typo
4) Apply patch
5) Verify that the typo is gone
6) Check account_debit_types table for type:
SELECT * FROM account_debit_types;
7) Run database update
8) Repeat and verify typo is gone
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adding orders from subscriptions makes acquisition information visible
in the serials module. In the table of acquisition data is a link back
to the basket - but this link is missing the basket number parameter -
it doesn't work. This patch fixes the TT variable to make it work.
To test:
- Add a subscription
- Add a new basket
- Add a order line using "Add from subscription"
- Go to the subscription details page, check the acquisitions tab
- Try the link to the basket - it should not work
- Apply patch
- Try the link again - now it should bring up the basket page with
the order.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Probably a copy & paste error: the OPAC view link on the staff
detail page currently has the class succeeding_entry_note.
This patch changes it to opac_view to allow for independent
styling of the link.
Note: The link will only be visible when OPACBaseURL is set.
To test:
- Use the element inspector or check the source code for
the class used on the OPAC view link on the staff detail page
- Apply patch
- Repeat and verify that the class has changed to opac_view
Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fixes a tiny string issue: Edit Items --> Edit items
To test:
- Go to tools / batch item edit
- Enter a barcode
- Check the heading above the edit item form
- Apply patch
- Verify the heading is now properly capitalized
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There are some ocurrences of "Call Number" in the sort option lists in
staff and OPAC. The patch changes them to "Call number".
To test:
- Check the sort option list in staff and OPAC for the typo
- Apply patch
- Verify it's now all corrected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds back a CSS selector which was incorrectly removed by Bug
23915. The "Go" button associated with the OPAC search results resort
operation should be hidden if JavaScript is enabled.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Perform a search in the OPAC
- On the search results page, there should be no "Go" button next to
the re-sort/results per page selection fields.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In addition to checking the patron image upload permission, this
adds a check for the patronimages system preference to the tools
home page and sidebar.
To test:
- Check that the patron image upload tool only displays when
- system preference patronimages is set to 'Allow'
and user is either
- superlibrarian or
- has bath_upload_patron_images permission
- Save URL of patron image uploader page
- Turn off patronimages
- Verify you get redirected to the home page of Koha when trying
to access the page
Note: this redirect is already used by the stock rotation feature.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the required line to the circulation.pref file to
dispaly the onpayment option in the MarkLostItemReturned preference
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Have some patrons in your system
2 - Export some of their info via reports
SELECT cardnumber, userid, surname, firstname, password, branchcode, categorycode
3 - Edit the file from above, changing all the password lines
4 - Import the file with overwrite
5 - Confirm passwords have not changed (run the report again and confirm the hashes are the same)
6 - Apply patch
7 - Restart all the things
8 - Check the new box on import screen to overwrite passwrods
9 - Import file again
10 - Confirm passwords have changed
11 - Signin using new password to verify the hash is the password as supplied
12 - Repeat via commandline import supplying --overwrite_passwords option
13 - Verify works as expected
14 - Prove -v t/db_dependent/Koha/Patrons/Import.t
Sponsored-by: ByWater Solutions
Signed-off-by: Ron Marion <ron.marion@goddard.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes alert added in subscription-add.js translatable using
the new __() function.
To test, apply the patch and confirm that the alert still works
correctly when submitting the subscription edit form with an invalid
vendor id.
Test that the string can be translated (using fr-Fr for example):
1. cd misc/translator && ./translate update fr-FR
2. Translate strings in misc/tranlator/po/fr-FR-messages-js.po
3. cd misc/translator && ./translate install fr-FR
Switch to the fr-FR translation and confirm the the alert shows your
translated string.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It will avoid crash and invalid data when creating/updating a
subscription.
This could have been done with a AJAX query but seems more convenient
this way.
Test plan:
- Create or update a subscription
- In the "Vendor" input try an empty string, a valid vendor's id, and
invalid one.
=> With an empty string you get the existing alert message
=> With a valid id you do not get any messages
=> With an invalid id you are not allowed to go to page 2
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Have a marc record file
2 - Go to Acquisitions, find a vendor, then an open basket
3 - Add to basket from a new file (if you already have one staged you can choose that instead)
4 - Import the file, then add to basket
5 - On the page where you select the records and set info select a record, set matching to 'Do not check' fill in the fund for the order
6 - When ready, click save as many times as you can
7 - When you go to the basket there are many copies of the order added
8 - Don't despair, apply the patch
9 - Repeat above
10 - When ready to add orders, click furiously
11 - The order is only added once!
12 - Success!
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes minor markup changes and adds some CSS so that the
module and actions checkboxes are laid out a little more clearly.
The patch includes some whitespace changes, so diff accordingly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
So we can see all options at once, and more easily select more than one
option.
Test plan:
1) Go to Tools -> Log viewer
2) Notice the new checkboxes under Modules, Actions and Interface. 'All'
should be selected by default for all three options
3) Confirm you can deselect 'All' and the other options are enabled.
Confirm selection all of the other options automatically selects 'All'
and disables the options again.
4) Confirm the results still work as expected when clicking 'Submit'
button
Sponsored-by: Catalyst IT
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When an item is claimed returned by staff, there is a column called Updated On - this date field column should remain blank until this claimed returned has been updated. Currently, when an item has been claimed returned, the date in the updated column states 12/31/1969. This date only shows up in the display, it is doesn't show up in the database like this.
Test Plan:
1) Enable return claims
2) Make a claim
3) Note the 'updated on' column has the date 1969-12-31
4) Apply this patch
5) Reload the page ( you may need to clear your browser cache )
6) Note the field is now blank
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch rewords the 'Display in check-out' option in the patron
attribute policy
To test:
1) Apply patch
2) Go to /cgi-bin/koha/admin/patron-attr-types.pl?op=add_attribute_type
3) Check that the 8th line down has been renamed to "Display in patron's
brief information:"
4) Check the description of this same option has been changed to "Check
to show this attribute in the brief information panel in the patron's
record (staff client)."
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In git installs, cronjobs live in misc, but for package installs, they
live under bin. Let's just still with 'misc/cronjobs' which is always
cromulent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the wording of the FinesMode and
CalculateFinesOnReturn system preferences explanations
1) Install Patch
2) Check that the wording of the FinesMode system preference has changed
to "NOTE: If the misc/cronjobs/fines.pl cronjob is being run, accruing
and final fines will be calculated when the cron runs and accruing fines
will be finalized when an item is returned. If CalculateFinesOnReturn is
enabled, final fines will be calculated when an item is returned."
3) Check that the wording of the CalculateFinesOnReturn system
preference has changed to add "NOTE: This system preference requires
FinesMode to be set to 'Calculate and charge.'" to the existing note.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To recreate:
1 - Create a new patron on the staff interface
2 - Note that 'Allow auto-renewal of items' defaults to 'no'
3 - Apply patch
4 - Create another patron
5 - 'Allow auto-renewal of items' defaults to 'yes'
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the text of the save button on the final step.
To test:
1) Build a guided report (the selections are immaterial)
2) Note that after you have been through the six stages, the button on
the "Confirm custom report" screen should be labelled "Save"
3) Install patch
4) Repeat Step 1. Note that on the "Confirm custom report" screen, the
button is now labelled "Next".
5) Run the report to check that the functionality still works.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Found in testing that this appears to work well for Elasticsearch -
so removing everything that made this Zebra only.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Also adding missing filters
ALSO ensuring you can switch back to library default on staff side
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch utilises an unused search facet to handle results shown per
page.
Sponsored-by: Region Halland
Signed-off-by: Gabriel DeCarufel <gabriel@inlibro.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch moves the click handler for patron attribute actions ("new",
"clear") from the links themselves to the container. This allows jQuery
to correctly target dynamically-created copies of the links.
To test you should have extended patron attributes enabled and you
should have some repeatable attributes defined.
- Create or edit a patron record
- In the "Additional attributes and identifiers" section, test the
"Clear" and "New" links. Confirm that the controls work with both the
original instance of the field and those created by clicking "New."
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes several event attributes from the patron entry form
and replaces them with event handlers in the <script> block.
Some event attributes were removed altogether because they weren't
functional: Onchange events on jQueryUI datepickers don't work, and they
would have been redundant even if they did work.
To test you should have some patron attributes configured
(Administration -> Patron attribute types). At least one attribute
should be configured to apply to one particular patron category.
Apply the patch and begin the process of adding a new patron.
1. Try to add a patron with details matching a patron which already
exists. You should get a confirmation message on screen which asks if
the patron is a duplicte. Test the link which shows the existing
record. It should trigger a popup window with details about the
patron.
2. Test the process of setting a patron's date of birth. Selecting a
date should trigger the display of the patron's age immedately below
the field.
3. Test that you cannot set a patron's expiration to a date which
precedes the date in the registration date field.
4. Test that you can add a manual restriction's expiration date, and
that the "Clear date" link works correctly.
5. Test that the "clear" and "new" controls links work with additional
attributes and identifiers.
6. Test that changing the patron's category correctly affects the
display of available attributes and identifiers: The attribute you
have associated with a particular patron category should only show if
that category is selected under "Category."
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Removes some last "remains" of INTRAdidyoumean.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The amdin page for the "did you mean" feature has two block for setting it up in the staff interface, and a note saying this isn't implemented on the staff interface yet.
We remove the part about the staff interface until it actually is implemented.
Test plan :
1) Apply patch
2) Go to Administration > Did you mean?
3) See there is only the OPAC block
4) Change some checkboxes
5) Save configuration
6) Check that configuration is saved
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard 2018-03-16 10:47:47 UTC :
<<
I don't think the system preference adds any security. There are already multiple permissions required for working with plugins:
- Configure plugins
- Manage plugins ( install / uninstall )
- Use report plugins
- Use tool plugins
And even with those permissions your server must be configured to allow the use of plugins.
>>
Test plan :
1) Install kitchen sink plugin https://github.com/bywatersolutions/koha-plugin-kitchen-sink
2) Run misc/devel/install_plugins.pl
3) Set config enable_plugins=1
4) Check all parts of the plugin are working
5) Set config enable_plugins=0
6) Check all parts of the plugin are disabled
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In order to remove UseKohaPlugins syspref, adds to Koha Template Toolkit
plugin a method ArePluginsEnabled().
Test plan:
1) Set syspref UseKohaPlugins enabled
2) Set config enable_plugins=1
3) Check you see "Tool plugins" in "Tools" home page and menu
4) Check you see "Manage plugins" in "Koha administration" home page
5) Check you see "Report plugins" in "Reports" home page and menu
6) Set config enable_plugins=0
7) Check you don't see in 3) 4) 5)
8) Run prove t/Koha_Template_Plugin_Koha.t
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
ClaimReturnedWarningThreshold is supposed to display a warning if a patron has more than the number of claims specified in the system preference. Currently the warning is displayed for any number of claims over zero.
Test Plan:
1) Make 3 return claims for a patron
2) Set ClaimReturnedWarningThreshold to 4
3) Note the claims warning displays for the patron on circulation.pl
4) Apply this patch
5) Reload circulation.pl, the warning should go away
6) Set ClaimReturnedWarningThreshold to 2
7) Reload the page, the warning should reappear
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a unique id attribute to each checkbox in the table of
saved reports. Also updated is the corresponding <label>'s "for"
attribute so that clicking the report id will toggle the checkbox.
To reproduce, go to Reports -> Use saved and click a number in the ID
column. Nothing happens.
After applying the patch clicking the number should check or uncheck the
corresponding checkbox.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok, no errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds CSRF token support to opac-messaging.pl,
which allows users to manually update their messaging preferences,
but prevents bad actors from tricking people into updating their
preferences from cross-site requests.
Test plan:
0. Set SMSSendDriver global system preference to "Test" if unset
1. Log into the OPAC
2. Navigate to a URL in your browser like the following:
http://localhost:8080/cgi-bin/koha/opac-messaging.pl?modify=yes
&1=email&digest=1&2-DAYS=5&2=email&digest=2&4=email&SMSnumber=0444444444
3. Observe that the preference and SMS number update
4. Apply the patch
5. Navigate to a URL in your browser like the following:
http://localhost:8080/cgi-bin/koha/opac-messaging.pl?modify=yes
&1=email&digest=1&2-DAYS=5&2=email&digest=2&4=email&SMSnumber=0444444444
6. Observe that you get an error message of "Wrong CSRF token" instead
of the previous behaviour
7. Navigate to a URL in your browser like the following:
http://localhost:8080/cgi-bin/koha/opac-messaging.pl
8. Update "Advance notice" to 3 and update "SMS number" to 61111111111
9. Observe that the "Advance notice" and "SMS number" fields update
correctly
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the a js-date-format.inc file on each opac and staff interface (date-format.inc whas not available as name)
When you include that file in your TT, you'll get the following functions available:
1. $date(raw_date_string, options)
This function parses a date string, as produced by an api call, and returns the corresponding date formatted according to 'dateformat' and 'TimeFormat' parameters.
For example:
// dateformat: us
// timeformat: 12hr
// Timezone: UTC
$date('2020-03-23T15:00:00+01:00') // You will get '03/23/2020'
$date('2020-03-23T15:00:00+01:00', {withtime: true}) // You will get '03/23/2020 14:00'
$date('2020-03-23T15:00:00+01:00', {withtime: true, tz: 'Europe/Paris'}) // You will get '03/23/2020 15:00+01:00'
Options:
* dateformat: override date format as configured in staff interface (accepts also 'rfc3339')
* timeformat: override time format as configured in staff client (available options are '12hr' and '24hr')
* withtime: also print the time part (default false)
* tz: set the timezone
2. $datetime(raw_date_string, option)
The same as $date but sets withtime to true
3. $time(raw_date_string, option)
The same as $datetime but shows only the time part
To test you must implement and test bug 20936, where it will be used
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds koha-tmpl/intranet-tmpl/lib/moment/moment-timezone-with-data-10-year-range.min.js in order to use the moment library with timezones (https://momentjs.com/timezone/)
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds koha-tmpl/opac-tmpl/bootstrap/lib/moment-timezone-with-data-10-year-range.min.js in order to use the moment library with timezones (https://momentjs.com/timezone/)
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds koha-tmpl/intranet-tmpl/lib/moment/moment.min.js in order to use the moment library (https://momentjs.com/)
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds koha-tmpl/opac-tmpl/bootstrap/lib/moment.min.js in order to use the moment library (https://momentjs.com/)
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the interface or functionality.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch reindents the template for saved reports, replacing tabs with
spaces and making indentation consistent. Some lines have been split up.
To test, apply the patch and go to Reports -> Use saved.
- Test adding, editing, viewing, and running reports
- Test filtering by group and subgroup
- Test the process of adding a guided report
Everything should work as expected.
Use your preferred method for checking the differences between files
while ignoring whitespace. I use diff with the "-w" flag, but I'm not
your dad. The only changes you see should be split lines.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a currency dropdown list to the Actual cost field when
receiving items in the acquisition module.
The idea is to let the librarian entered a price in a foreign currency
that will automatically be converted in the local currency ('active').
This converted value will be use as the actual cost once the form is
submitted.
Test plan:
- Create several currencies with different rates
- Create an order, close the basket and receive
- On the receipt page you will notice a new "change currency" checkbox
right close to the 'Actual cost' input.
- Check it
=> The 'Actual cost' input is readonly and a new line appears at the
bottom.
- Enter a number and select a currency
=> The 'Actual cost' input is automatically filled with the converted
value
- Save
=> The converted Actual cost has been inserted in the database.
Sponsored-by: Athlone Institute of Technology
Signed-off-by: Devinim <nazli@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fixes links to the patron accounts from the edit and list view of
suggestions.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
On creating the TT var managedby_patron does not exist yet
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To separate the two feature we want to create a distinct template
notice.
A new NOTIFY_MANAGER notice is added.
A follow-up patch will be added for other languages, when this one will
be approved by QA.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Ensure that the sequence of columns will be the same for new
and updated installations (add AFTER ...)
- Fix permissions (see bug 22868)
- Fix column configuration (see 16784)
- Remove '- ' displying before the date
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The notify option is only available from the edit view
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
No tests are provided for the changes made to SearchSuggestion. It is
going to be remove very soon as it is super ugly...
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Just a bit of cleaning
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Prior to this patch there was an hidden behavior that set the manager to
the logged in user when a suggestion was edited. This patch proposes to
let the librarian pick another manager.
Other small adjustements will be added to polish this new behavior:
* Create 2 new DB columns: suggestions.lastmodificationby and
suggestion.lastmodificationdate
* Choose a manager when editing a suggestion
* Batch modify suggestions and set a manager for them
* Let notify the new manager using the TO_PROCESS letter
* Display the manageddate, lastmodificationby and lastmodificationdate
info where appropriate
This first patch adds a new "Select manager" link when editing a
suggestion.
Test plan for the whole patchset:
0/
a. Execute the update DB entry, generate the new DBIC file and restart all
b. Create at least 2 patrons with the suggestions_manage permission
1/ Submit a new suggestion (OPAC or staff, not important)
2/ Accept it
3/ Edit it
=> "Last modification by" is empty
=> You see that you are the manager of this suggestion
4/ Click "Select manager" and search for a new manager
=> The patron search will only display patrons with the
suggestions_manage permission
5/ Save
6/ Edit again
=> The manager is set to you, but there is a note saying that previously
it was the patron you picked
=> The "Last modification by" is set to you
7/ Click "Keep existing manager"
=> The manager is now set to the previous manager
8/ Select another manager (which has a valid email address defined)
9/ Click the "notify" checkbox
10/ Save
11/ Confirm that a TO_PROCESS notice has been generated into the
message_queue table
12/ Create at least one other suggestion
13/ List the suggestions
=> There is a 4th action column to assign a manager to several
suggestions in one go.
14/ Use this new button and confirm that it works as expected
15/ Go to your purchase suggestion list (OPAC and staff)
=> You see the "managed date" displayed in a new column
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Branchcode = Library
- Desk id = Desk ID
- Show library name on desk list and when deleting desk instead of code
- Some small changes to the database documentation.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add a desk and linked it to a library (branch). That's it. In the
future it'll have super features like being able to link waiting
reserve to a specific desk.
Test plan:
1. go to the administration page and notice there isn't any mention of
desk whatsoever
2. apply patches
3. ./installer/data/mysql/updatedatabase.pl
4. prove t/db_dependent/Koha/Desks.t
5. you now have desks links in admin-home and admin-menu
6. click the link
7. add a desk
8. add another one
9. delete one
10. you should have a fair list of all current desks defined
11. Done
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Whe a duplicate patron is found, the toolbar to save is display without
the button.
We must hide it completely, user has to use the 2 buttons from the dup
message "Editing existing" or "Save as new".
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Koha shows the number of subscriptions linked to a vendor,
but there is no way to look them up. This adds a link to the
subscription search with the vendor name, so there is an easy way
to find the subscriptions.
To test:
- Be superlibrarian or have serials permission
- Make sure you have one or more subscriptions linked to vendors
- Go to the vendor's detail page in acquisitions
- Verify the number of subscriptions is now a link
- Verify the search results are correct when clicking on it
- Remove permissions (no serials, not superlibrarian)
- Verify now the number shows, but is not linked
Signed-off-by: Nazlı Çetin <nazli@devinim.com.tr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The patron clubs note was ending with .., but patch also removed
some single . to be consistent with the majority of entries on the
tools page.
To test:
- Check the tools start page for ending . in the notes
- Apply patch
- Verify the punctuation is now consistent
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This makes it so the new option appears right above the table of checkouts etc.
but below any warnings, messages or dialogs.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There were several versions: auto renew, auto-renew, autorenew
I've decided to use auto renew (from automatic renewal) to keep
things a bit more consistent.
The DB update was missing AFTER and IGNORE for the sys pref.
Also fixed a tiny typo (tp > to)
Also changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Verify on staff side that patron can be edited to opt in our out of auto renewal
2 - Check out some items to a patron opted in to auto renewal
3 - Ensure the items are checked out and set to autorenew
4 - Login on the opac at the patron
5 - Verify items cannot be renewed as scheduled for auto-renewal
6 - On staff side, opt patron out of auto renewal
7 - Verify on opac items are no longer marked for auto renewal
8 - Run the auto renewal cron job, items are not renewed
9 - Set 'no renewal before' to a setting that would prevent renewal
10 - Verify that opting patron in or out of auto renewal changes only the reason items cannot be renewed
11 - Set 'no renewal before' to a setting that would allow for renewal
12 - Verify that opting patron in/out changes their ability to renew
13 - Verify that when opted out cron does not renew
14 - Verify that when opted in the item is auto renewed
15 - Reset the due date, opt out, verify manual renewal succeeds
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds an ID to the payout confirmation modal on the
borrower account details page.
Test plan:
1/ Apply patch
2/ Attempt to issue a payout to a patron
3/ Inspect the page and note the presence of an ID for the confirm
button
4/ Signoff
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Considering that the the use of finesCalendar for this calculation is
already a binary choice, it makes sense to remove the use of
finesCalendar here. It is an uneccessary complication that could
introduce confusion. Allowing this new setting to directly control
the behavior makes it clear and obvious what is going on.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
