As a consequence, the borrower_files table would not exist
in Koha databases that were installed starting at 3.10.0
or later.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Remove the column 'itemnumber' from the table 'serial'. This is
a 1 to many relationship, and this reference does not make sense.
The 'serialitems' table handles the relationship between the 'items'
table and the 'serial' table.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify serial.itemnumber has been removed from the database
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Column removed. No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Some table columns should have an index to speed SQL queries :
- statistics table has only one index (used to make heavy queries for reports)
- itemtype should have an index in items and biblioitems (this is used in circulation to check the number of existing issues of a specific item type)
- issue.branchcode and issue.issuingbranch
Test plan :
- Create a new database using kohastructure.pl
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Apply update database on a master version
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Indexes created as described. No errors.
Fixing small merge conflict.
Test presence of new indexes on all affected tables.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Increase both on staff and OPAC interface
from 80 to 255 characters to be saved in
the database. Shown will be 80 characters.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Clean patch, workes as described.
To test:
- Apply patch and run database update
- Check that the column in the database is now varchar(255)
- Enter a new suggestion in the OPAC
- Edit this suggestion in staff
- Confirm form has the new max value set
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
DB changements:
- Adds 2 fields: subscription.reneweddate and aqorders.subscriptionid.
- Removes 2 unused fields: aqorders.serialid and aqorders.subscription.
Main test plan:
1) Create a subscription
2) Create a bookseller and a basket
3) Add a new order 'from a subscription'
4) Search your subscription and check if results are correct
5) Click on the "order" link
6) Check the biblio information are filled in the form
7) Select a budget and fill some price information.
8) retry steps 3 and 4. Verify you cannot order the same subscription.
Message:Outstanding order (only one order per subscription is allowed).
9) click on your subscription (already added) and check you have a new
table "Acquisition details" with your price information in the "Ordered
amount" line.
10) receive this order
11) On your subscription detail page, the "Spent amount" line must be
filled with your price information.
12) Re order the same subscription. Now you are allowed to. Prices
information have to be filled with the previous information.
13) Retry some orders and click on a maximum of links in order to find a
bug :)
Signed-off-by: Leila Arkab <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
english and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' infos
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the ability to add groups to the library select
pulldown on the opac, if it is enabled.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Go to Administration › Libraries and groups
4) Create a new group, or edit an existing one
5) Ensure the 'Show in search pulldown' checkbox is checked
6) Save the group
7) Enable OpacAddMastheadLibraryPulldown if it is not already enabled
8) Load the OPAC, try the group search from the libraries pulldown menu
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes! Now this works, and well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Renew an issue for a number of days (filled in the issuing rules).
Test if rules work for any i[item]types and if there is no regression.
- new column issuingrules.renewalperiod
- remove all occurrences of an already removed syspref (globalDueDate)
- remove an unused routine (Overdues::GetIssuingRules)
How it works:
- On existing installations, the issuingrules.renewalperiod =
issuingrules.loanlength. So the behaviour is the same before and after
this patch.
- when you add a rule, you can choose a renewal period (the unit value
is the issuingrules.unit). So you can have a renewal period in hours
or days.
- The default value for the renewal period is 21 days (same as
loanlength)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The primary advantage to the Firefox offline cirulation plugin when compared
to the offline circulation desktop application, is the ability to add offline
circulation actions to a queue so that multiple machines running offline
circ can have their circ actions combined and ordered chronologically before
being executed. This commit adds the ability to put actions from uploaded
KOC files into this queue. In this way, both the FF plugina and the desktop
application can be run side by side with no ill effects.
Signed-off-by: Bob Birchall <bob@calyx.net.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch use DataTable, see BUG|BZ 6836
- css/datatables.css
- lib/jquery/plugins/jquery.dataTables.min.js
- js/datatables.js
http://bugs.koha-community.org/show_bug.cgi?id=7167
Bug 7167 follow-up
Major changes:
* creating database tables for update on the fly, the 1st time the update script is called
* version is checked on mainpage.pl (and here only). If syspref Version differ from kohaversion.pl, the old updatedatabase is launched. If there are updates missing from new mechanism, the updatedatabase page is reached
* kohaversion check on each page is now useless in Auth.pm, removed dead code
* Updated installer: at the end of the process, retrieve all updates and automatically mark them "OK", as they're included in installer
Minor changes:
* adding copyright
* adding poddoc
* updating a warning, for better clarity
* switching from $$var to $var->
* small TT glitch fixed in updatedatabase.tt
* about.pl now returns the Version systempreference PLUS all the patches that have been applied
Bug 7167 follow-up perlcritic & numbers display & partial apply depending on DEBUG
* add use strict to updatedatabase, that is now perlcritic compliant
* partial apply of DB revs is now managed by DEBUG env variable = if DEBUG=0, the user can just apply every DBrev. If DEBUG=1, we're in a dev env, the user know has the option to apply DBrevs one by one
Display:
* in updatedatabase, small spelling changes
* in about.pl, remove 0 just after . (3.06.01 is displayed as 3.6.1)
* improve the display of applied numbers on about.pl
- before this patch, if you have N, N+1, N+2, N+3 and N+10 DB rev applied, about was displaying : , N+1 / N+2 / N+3 / N+10
- after this patch you have N......N+3 / N+10
* add ORDER BY into list_versions_already_knows to have number retrieved in the same order whatever the order they are applied
http://bugs.koha-community.org/show_bug.cgi?id=6679
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve the update.pl script
* Added CLI options to update.pl
* Call update.pl from the installer.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Now, we check versions on mainpage.pl and after login
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Reimplementing Marcel's suggestions & fixes
* Fixing the bugguy old version check (that was made against 3.0900000 instead of 3.0900027 -the last current kohaversion number
* in the CLI script, if there is nothing to report, just say it
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7167: Remove check_coherency
As suggested by Katrin, we've removed the call to check_coherency. It intended to provide readable comments when some SQL was wrong. Removing this sub result in the SQL error being displayed. That's OK because the sysadmin or the developer can google the error, understand it, then fix it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Changing in .sql parsing
We first split on delimiter and then extract comments. You can now put
\n for delimiter comments.
ex:
DELIMITER ;
-- this is a comment
SELECT * FROM my_table;
-- another comment
Before this patch, we had to write:
DELIMITER ;
-- this is a comment;
SELECT * FROM my_table;
-- another comment;
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve display + factorize get_queries
Despite it's size, this patch is dealing with display questions only:
* The text "comments" and "queries" was hardcoded in ajax-updatedb-getinfo.pl script. It has been replaced by a JSON call, returning 2 separate values, "comments:" and "queries:" is now in the template, making it translatable
* Some minor tweak in the display (like putting things in bold, displaying OK in green, warnings in yellow and KO in red)
* Reordering the column headers for more readability:
* Status column is merged with availability, column is after status
* Status/availability terms more clear: "Not applied" instead of "unknown", "Applied and OK", "Applied and failed", "Applied and forced" are the 3 other statuses
* Removed one click to display comments on DBREv not yet applied: before the patch, one had to click "Show details", then "Get comments", now, "Get comments" is enough
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX typos & moving a script to a proper place
* renamed availables to available
* renamed already_knows to already_applied
* fixed FSF & copyright headers
* removing a "use strict" because we already had use Modern::Perl
* fixed a tiny typo in about.tt
* moving update.pl to misc/bin because it's a CLI script
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add dependency File::Find::Rule
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: We want to execute non-numeric version with the -all option
Dealing with Marcel comment 100:
> Note that the current code around line 52/53 does not
> handle that correctly:
> Argument "\x{74}\x{65}..." isn't numeric in numeric ge (>=) at
> installer/data/mysql/update.pl line 52.
Now, a non-numeric DBRev will be applied if you provide the --all parameter, without throwing the error
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 reindentation & removing dead code
* The if (! defined $ENV{PERL5LIB}... block was wrongly intented
* The 3 lines running update.pl are useless: the update (new mechanism) is run from admin/updatedatabase.pl script. This part of install.pl is run only when you have "old style" DB revisions.
Summary:
* old mechanism = it's run as previously, by reaching the installer/install.pl?step=3 page, that applies all revisions
* new mechanism = when you log-in or reach mainpage.pl, you reach admin/updatedatabase.pl, where you can see what will be run, and run it
Tiny side effect = the check for old mechanism is now done *after* authentification (thus it's not done on each page call). It means that the user will have to enter login/password twice :
* first to log-in to Koha
* second to run installer/updatedatabase.pl?step=3
As the old mechanism is deprecated, we can expect this will happend only a few time in the history of a setup, it's not a big deal.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Don't raise an error in routine TableExists
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX merge
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 follow-up fix POD syntax to please koha-qa.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The Koha installer reports "Error 1166 at line 1871: Incorrect column
name 'closed'." Reason: line 1923 in kohastructure.sql had whitespace
between back tick on Column name "closed".
Patch removes white space on given line.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Elliott Davis <elliott@test.bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In a librairies network, we would like to declare specific values just
for one (or more) library.
Here we implement the ability to associate categories, patron attributes
types and/or authorised_values with librairies (branches).
This patch adds 3 new association tables:
- categories_branches ( association table between categories and branches )
- authorised_values_branches ( association table between
authorised_values and branches )
- borrower_attribute_types_branches (association table between
borrower_attribute_types and branches )
Plan test:
- Create (or modify) categories, patron attributes and
authorised_values and link it with one (or more) library.
- Set one of these librairies
- Go to one of the multiple pages where this specific value must be displayed
and check that it does appear.
- Set a library not concerned.
- Check on the same pages this value is doest not appear.
A page list:
cataloguing/addbiblio.pl
cataloguing/additems.pl
members/members-home.pl
members/memberentry.pl
acqui/neworderempty.pl
tools/modborrowers.pl
and others :)
Please say me if filters don't work on some pages.
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.
On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription
On serial search 2 tabs is displayed (opened and closed subscriptions).
This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)
Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
new serial
- launch another search and check that the closed serial is into the "closed"
tab.
- You are allowed to reopen a subscription on the subscription detail
page and on the subscription result page. A javascript alert ask you
if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
displayed (catalogue/detail.pl, serials/claims.pl,
serials/serial-issues-full.pl, serials/serials-collection.pl,
serials/serials-edit.pl, serials/serials-recieve.pl,
serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
don't check the "Include expired subscriptions" checkbox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782: Followup: add some minor modifications
- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
From updatedatabase.pl:
$dbh->do("ALTER TABLE statistics ADD COLUMN ccode VARCHAR ( 10 ) NULL AFTER associatedborrower");
From kohastructure.sql:
`ccode` int(11) default NULL, -- foreign key from the items table, links transaction to a specific collection code
The variant in updatedatabase.pl is probably what was wanted.
This patch fixes the kohastructure and add another updatedatabase.pl, in case someone has a broken install.
This should not happen, because 3.10.0 still not released, but just in case...
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
CCode was added to the statistics table in this bug, but
was not added to kohastructure.sql. This patch adds it
with comment to the kohastructure.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch documents the cn_sort and agerestriction fields
in the biblioitems and deletedbiblioitems tables.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The borrowers table has the wrong documentation for the alternate
address3 and city fields. This fixes that.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- adding 2 select option in basdketheader.tmpl (delivery and billing
place)
- adding 2 more fields in basket csv export
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested together with patches for bug 7302.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Expose authority import functionality to the command line import
scripts, and rename them from commit_biblios_file.pl and
stage_biblios_file.pl to commit_file.pl and stage_file.pl.
To test (note that these instructions assume you have a MARC21
installation and are using the provided sample file):
1. Find a file of authorities (a sample file with MARC21 authorities
is attached to bug 7475) and download it to your server
2. Stage the file using the following command (replace <filename> with
the name of the file you saved in step 1):
> misc/stage_file.pl --file <filename> --authorities
3. Note the batch number the script assigns to your batch
4. Commit the records using the following command (replace <batchnumber>
with the batch number you made note of in step 3):
> misc/commit_file.pl --batch-number <batchnumber>
5. Index the authorities Zebraqueue (or wait)
6. Confirm that the new authorities appear.
7. Create a matching rule with the following settings:
Code: AUTHTEST
Description: Personal name main entry
Match threshold: 999
Record type: Authority record
Search index: Heading-main
Score: 1000
Tag: 100
Subfields: a
Offset: 0
Length: 0
(note the ID of this matching rule)
8. Stage the authority file again, this time using the following
command:
> misc/stage_file.pl --file <filename> --authorities \
--match <matchingrule>
7. Revert the import with the following command:
> misc/commit_file.pl --batch-number <batchnumber> --revert
8. Index the authorities Zebraqueue (or wait)
9. Confirm that the records have been removed
10. Import an authority record with the Stage MARC/Manage staged MARC
tools in exactly the way you would for a bibliographic record,
but choose "Authority" instead of "Bibliographic" for the record
type.
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Testing plan delivers as it should.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 11 September 2012
In order to make matching rules more useful for MARC21 authorities,
this patch adds special indexes on previous see-from headings and
LCCN. This patch does not change UNIMARC authority configuration in
any way. Also modifies the Koha schema in preparation for adding
authority import and matching to the Staging tools.
To install:
1. Run installer/data/mysql/atomicupdate/importauthorities.pl
2. Update the following four files in your koha-dev:
etc/zebradb/authorities/etc/bib1.att
etc/zebradb/marc_defs/marc21/authorities/authority-koha-indexdefs.xml
etc/zebradb/marc_defs/marc21/authorities/authority-zebra-indexdefs.xsl
etc/zebradb/xsl/koha-indexdefs-to-zebra.xsl
3. Reindex your authorities:
misc/migration_tools/rebuild_zebra.pl -a -r -v
NOTE TO RM: this patch adds an atomicupdate file that needs to be
incorporated into updatedatabase.pl if bug 7167 is not pushed.
http://bugs.koha-community.org/show_bug.cgi?id=2060
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 1 August 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 11 September 2012
- New pages:
- invoices.pl: allow to search in invoices on several criteria
- invoice.pl: permit to view and modify invoice details
- shipment date
- billing date
- shipment cost and budget used for shipment cost
Invoice informations are now stored in their own sql table and aqorders
have a link to it
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This should make saved reports more manageable.
Group/Subgroup hierarchy is stored in authorised_values,
categories REPORT_GROUP and REPORT_SUBGROUP, connected by
REPORT_SUBGROUP.lib_opac -> REPORT_GROUP.authorised_value
Database changes:
* authorised_values: expanded category to 16 chars
* created default set of REPORT_GROUP authorised values to match
hardcoded report areas
* reports_dictionary: replaced area int with report_area text, converted
values
* saved_sql: added report_area, report_group and report_subgroup;
report_area is not currently used, saved for the record
C4/Reports/Guided.pm:
* Replaced Area numeric values with the mnemonic codes
* get_report_areas(): returns hardcoded areas list
* created get_report_areas(): returns full hierarchy (groups with belonging
subgroups)
* save_report(): changed iterface, accepts fields hashref as input
* update_sql(): changed iterface, accepts id and fields hashref as input
* get_saved_reports():]
- join to authorised_values to pick group and subgroup name
- accept group and subgroup filter params
* get_saved_report():
- changed iterface, return record hashref
- join to authorised_values to pick group and subgroup name
* build_authorised_value_list(): new sub, moved code from
reports/guided_reports.pl
* Updated interfaces in:
cronjobs/runreport.pl, svc/report, opac/svc/report: get_saved_report()
reports/dictionary.pl: get_report_areas()
reports/guided_reports.pl
reports/guided_reports_start.tt:
* Reports list:
- added group/subgroup filter
- display area/group/subgroup for the reports
* Create report wizard:
- carry area to the end
- select group and subgroup when saving the report; group defaults to area,
useful when report groups match areas
* Update report and Create from SQL: added group/subgroup
* Amended reports/guided_reports.pl accordingly
Conflicts:
C4/Reports/Guided.pm
admin/authorised_values.pl
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/dictionary.tmpl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/guided_reports_start.tmpl
misc/cronjobs/runreport.pl
reports/dictionary.pl
reports/guided_reports.pl
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In the "suggestions" table, the "lib" and "lib_opac" sizes
has been raised from 80 chars to 200.
The GUI allowing the authorised values creation/update has
been changed accordingly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Stéphane Delaune <stephane.delaune@biblibre.com>
Signed-off-by: Marc Veron <veron@veron.ch>
NOTE: After applying the patch I got following errors in members/pay.pl:
Global symbol "$writeoff_sth" requires explicit package name
Global symbol "$add_writeoff_sth" requires explicit package name
Added to lines at the begin of members/pay.pl:
our $writeoff_sth;
our $add_writeoff_sth;
Now the patch worked as expected.
However I am not quite sure if signing off is OK in this situation.
Marc
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In acqui/parcel.pl, there is now the possibility to cancel a receipt.
In "Already received" table, just click on "Cancel receipt" and the
order line will go back to pending orders.
If it was a partial receipt, order line is merged to its 'parent' line.
Attached items are modified so that they become attached to the merged
order line.
If AcqCreateItem is 'receiving', attached items are deleted.
If an order line was first partially received, and then completed. You
must cancel the 'parent' order line before cancelling the 'child'.
Signed-off-by: Marc Veron <veron@veron.ch>
The patch behaves like expected, and the feature is really helpfull.
Just a tiny remark about the following message:
-------------
Cannot cancel receipt. Possible reasons :
You are trying to cancel the receipt of an order line whose parent order line is already received. Cancel this parent order line and retry.
-------------
Maybe it would be good
- to explain a little bit more why it happend and re-word the message for non technical people (not everybody understands 'parent' the same way)
- prevent the situation to happen (e.g. forbid order lines to be deleted if they are already received) - but that would be in the scope of an other bug, I think.
I think such things could be fixed in the future during the ongoing work for Acquisitions module. Signing off.
Some libraries would like to store more verbose data in a borrower attribute field.
This commit increases the maximum length of a borrower attribute from 64 characters
to 255 characters.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Create transport_cost table, added UseTransportCostMatrix syspref.
transport_cost table contains branch to branch transfer
costs. These are used for filling inter-branch hold transfers.
Moved GetHoldsQueueItems() from .pl to HoldsQueue.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
New version implementing Paul's advice.
See Wiki http://wiki.koha-community.org/wiki/Age_restrictiotion
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
fix updatedatabase.pl
New fix updatedatabase.pl to apply to current master by Marc Veron veron@veron.ch
...and fixed missing curly bracket after merging updatedatabase.pl
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This field said it was a 1 or 0 value, but it's
a date field.
http://bugs.koha-community.org/show_bug.cgi?id=6716
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Replaced existing MaxFine syspref logic with overduefinescap.
Repurposed MaxFine to be the overall overdue limit for all items
overdue. Implemented new MaxFine logic in UpdateFine().
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Tested according to Srdjan's test plan and everything worked like he said it would. I set fined equal to $2 and max fine equal to $1. When I ran the fines script for overdue items fines assessed were only $1.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
I did not document the 'tags' table in this patch
because it looks like this table is unused, so I
need confirmation of that before marking it as
'unused.'
This table has a lot of fields that I never see any values in.
All have been noted in the documentation and I welcome any
additional info about how these fields might be used.
Adds the primary key reserve_id to reserves and old_reserves.
Thanks to gmcharlt and jcamins for contributions.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Updated DBrev to start with 3.09... instead of 3.08...
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a conflict in updatedatabase and removed kohaversion.pl from the patch.
Patch works nicely, tested with different searches and limits.
Note: Sort options don't get into the history still.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
This feature will add the option of displaying a select quote
for the day on the OPAC homepage. It will include the addition
of a QOTD editor in the tools section of the staff interface
which will allow the addition, editing, and deletion of quotes.
A single system preference will enable/disable the display of
the QOTD on the OPAC homepage. A new granular permission will
also be added to conrol user access to the QOTD editor tool.
Possible extentions to this would be code to allow alternate
quote selection algorithms to be added to vary how the currently
displayed quote is selected from the table of quotes.
This patch is a squash of the following work:
--Adding quotes table to kohastructure.sql and updatedatabase.pl
Note: This patch is intended for a MySQL based installation only.
That means that it includes backticks because that is what is required
at this point in history to install Koha correctly on a MySQL based
installation.
Feel free to port this over to the Pg stuff in the data/Pg directory.
--Adding system preference to control display of QOTD on OPAC main page
--Adding sample quote data
These quotes are taken from various US presidents. I'm not sure these
are applicable to the rest of the world, so I'm leaving it to translators
and others to add sample quote data for other languages.
--Adding edit_quotes user permissions
--Squash with other db related patches in this series
--Adding quotes editor pages to tools
--Adding QOTD editor link to tools homepage
--Integration of DataTables into QOTD Editor
--Impleminting jEditable into the quote editor
--Adding delete and add option to editor
--Fixing OPAC display so the QOTD div does not show if no quote is returned
--Also removing useless code from tools/quotes.pl
--Adding spans around QOTD foo in opac-main.tt
--Also fixing quote selection logic to accomodate the possibility of
a single quote in the db a litte better.
--Changing timestamp column header to a more user-friendly 'Last Displayed'
--Fixing bug in quote selection logic. This bug caused a situation where
when the table had only a single quote with an id greater than 1 in it,
no quote would be selected.
--Fixing up sorting in the quote editor table. --jcamins
--Adding span element to quote separator --jcamins
--Overriding the default empty table message supplied by datatables-strings.inc
--Adds missing page heading
--Adds beginning of click-for-help elements.
--Refactors delete functionality to allow selecting of quotes to delete,
enabling multi-delete.
--Refactors saving added quote functionality so that striking <Enter>
saves the new quote.
--Refactors canceling aded quote functionality so that striking <Esc>
cancels the new quote.
--Removing debug console.log statements
--Implementng the YUI button widget/toolbar used on other pages.
--Adds a 5px radius to all YUI buttons to bring them into
conformity with the general trend toward rounded corners
--Fixes capitalization in quote editor
--Implements improvements suggested by jcamins and oleonard
--Adds DataTables Plugin dataTables.fnReloadAjax.js
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Hands back JSON, and supports caching
Squashed commit of the following:
commit 5c93506079738b9a13139417d3a0734289a4b007
Author: Chris Hall <chrish@catalyst.net.nz>
Date: Mon Nov 21 15:41:14 2011 +1300
Fixed bugs when creating reports, added more user friendly input and
feedback
commit c62430bb358ee4af6ee5331b4d3a2ed67f723032
Author: Chris Hall <chrish@catalyst.net.nz>
Date: Mon Nov 21 12:00:27 2011 +1300
Added caching to intranet report webservices, added cache expiry and public
options to reports
commit 2d89f0777d95b26bf08635782070b6367d0698f3
Author: Chris Cormack <chris@bigballofwax.co.nz>
Date: Wed Nov 9 20:29:26 2011 +1300
Working on caching for services
commit e0511f180cebd81747858ad776433fe3a1cf6854
Author: Chris Cormack <chris@bigballofwax.co.nz>
Date: Wed Nov 9 08:28:26 2011 +1300
Starting work on webservices
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch includes database update adding 2 new fields to the saved_sql table.
1) Checked that adding/deleting/editing of sql reports still works and new
fields are correctly saved to the database.
2) The saved reports page now lists the new fields correctly.
3) Checking URLs with JSON output
- if report is not public http://localhost/cgi-bin/koha/svc/report?id=2 fails,
but http://localhost:8080/cgi-bin/koha/svc/report?id=2 works
- if report is public, both links work
4) Checking results are cached
Created a report listing my borrowers, setting caching to 60 seconds and
added new borrowers before doing following tests.
- URL doesn't show new borrower immediately - correct
- Turning off the usecache system preference updates data - correct
- Restarting memcached updates data '/etc/init.d/memcached restart' - correct
- Waiting until cache time runs out updates data - correct
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Retested the feature and renewing my sign-off.
There are some things that should be noted:
- currently there is a hardcoded limit of 10 results for the reports webservice
- reports with runtime parameters are currently not supported
Correcting patron_attributes_types definition in kohastructure.sql
to allow NULL entries for category_code, matching the definition
specified in updatedatabase.pl. Adds an entry to updatedatabase.pl
to correct existing installations with the incorrect table structure.
After running the updated updatedatabase.pl the category_code
column in borrower_attribute_types should show that it allows
NULL entries. Adding a new patron attribute type with no
patron category specified should work correctly.
To test the update to kohastructure.sql: Back up your Koha
database, drop it, and recreate it. Load the staff interface
and go through the web installer. After recreating the database
enable ExtendedPatronAttributes and try adding a new patron
attribute type with no patron category specified. The operation
should be successful.
signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
a new update for installations affected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Mason James <mtj at kohaaloha.com>
Before patch web installer dies with error message on creating
database tables:
ERROR 1064 (42000) at line 2821: You have an error in your SQL
syntax; check the manual that corresponds to your MySQL server
version for the right syntax to use near '- biblionumber int(11)
NOT NULL, - rating_value tinyint(1) NOT NULL, - ' at line 2
After patch installation completes normally. I also checked
that tables ratings and pending_offline_operations were
created correctly.
Note: This is Marc Veron's first patch for Koha - congratulations!
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
patch applied to commit eb3dc448d2
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Turned on star ratings in the opac on details and results
Searched for titles - saw the stars
Clicked on a title
Clicked on the stars
Clicked on the stars to change my rating
Logged out
Tried to click on stars
Logged in as different user
Rated items that were rated already and saw average change
Changed preference to show only on detail and repeated tests
Changed preference to now show stars
All above tests passed. Signing off.
Rebased 3-19-12 by Ian Walls
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
ShelfBrowser uses two SQL queries with syntax
WHERE ((cn_sort = ? AND itemnumber < ?) OR cn_sort < ?)
AND homebranch = ? AND location = ? AND ccode = ?
homebranch already has index, and adding indexes on ccode and location
improves performance by 30% for each query since MySQL is able to use
index_merge intersect(items_ccode,homebranch,items_location)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Also deletes earlier updatedatabase addition of lengthunit to avoid errors for people upgrading from stable (thanks Katrin for the idea)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked creating a database from scratch and updating a database
with missing lengthunit column. Both worked without any problem.
If you update and have the column updatedatabase will report an error,
but the database will be ok.
svc/import_bib:
* takes POST request with parameters in url and MARC XML as DATA
* pushes MARC XML to an impoort bach queue of type 'webservice'
* returns status and imported record XML
* is a drop-in replacement for svc/new_bib
misc/cronjobs/import_webservice_batch.pl:
* a cron job for processing impoort bach queues of type 'webservice'
* batches can also be processed through the UI
misc/bin/connexion_import_daemon.pl:
* a daemon that listens for OCLC Connexion requests and is compliant
with OCLC Gateway spec
* takes request with MARC XML
* takes import batch params from a config file and forwards the lot to
svc/import_bib
* returns status
ImportBatches:
* Added new import batch type of 'webservice'
* Changed interface to AddImportBatch() - now it takes a hashref
* Replaced batch_type = 'batch' with
batch_type IN ( 'batch', 'webservice' ) in some SELECTs
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
New field deliverytime in aqbooksellers table. It is an estimated
delivery time for orders (in days).
You can set this delay on the supplier modification page.
It is used in the late orders search.
The order estimated date is the aqbasket.closedate +
aqbooksellers.deliverytime
If you set a delay, the query check if closedate <= today - delay
If you set a "delivery time from" and a "delivery time to", the query check if
$delivery_time_from <= aqbooksellers.deliverytime is not NULL and if
closedate + deliverytime >= $delivery_time_to
if there is not a time_to then $delivery_time_to = the current date.
Adds the ability to suspend reserves. The new system preference
AutoResumeSuspendedHolds enables the ability to set a date for
a suspended hold to automatically be resumed.
When a hold is suspended, it will continue to increase in priority
as the holds above it are fulfilled. If the first holds in line
to be filled are suspended, the first non-suspened hold in line
will be used when an item can fulfill a hold that has been placed.
http://bugs.koha-community.org/show_bug.cgi?id=7641
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested with the preference on and off:
1. placed several holds in the staff client
2. suspended some with a date
3. suspended some without a date
4. triggered hold message by checking in for hold with suspensions
5. the suspended hold was skipped as it should be
6. tested suspending holds in the OPAC w and w/out dates
7. ran the cron to clear suspensions with dates
All the above tests worked as expected. Signing off.
3 features:
- adds social network information in search results
- adds babeltheque data in opac-detail
- adds social network links in opac-detail too (google+, twitter, mail
and co.)
* group some attributes for a more friendly display
* allow a link between a borrower category and an attribute to display
it only for the specified category
* Attr classes filled with AV 'PA_CLASS' category (you have to create AV
with a new category 'PA_CLASS' to fill class list)
this patch add 2 fields in borrower_attribute_types :
category_code
class
Signed-off-by: Julien Sicot <julien.sicot@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Modifying Koha structure for improving list permissions.
Adds new table virtualshelfshares for maintaining shared private lists.
Adds three columns to virtualshelves for permissions per list.
Adds column borrowernumber to virtualshelfcontents.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Feb 28, 2012: Added three FK constraints for QA (for owner/borrowernumber in virtualshelves, shelfcontents and shelfshares). Resolved syntax error with a comment. Tested the install.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Adds support for Floating Collections (i.e. items that don't automatically return
home when checked in at another branch) on a per branchcode/itemtype basis.
This patch adds a new column (returnbranch) to the default_circ_rules, default_branch_item_rules,
default_branch_circ_rules and branch_item_rules tables, after the 'holdsallowed' column. While
this is coded as a varchar(15), the only currently supported values are 'homebranch', 'holdingbranch',
'noreturn' and NULL.
On upgrade, the value of HomeOrHoldingBranchReturn is used to populate the global default (which is
stored in default_circ_rules.returnbranch).
To access this value, use C4::Circulation::GetBranchItemRule. This subroutine is altered to supply
an additional key, "returnbranch", containing this value (or 'homebranch' as a default). No existing
usage of GetBranchItemRule should need to be modified.
The use of HomeOrHoldingBranchReturn is removed in AddReturn to instead use this subroutine. This will
determine, on a more granular level, where the item should be transferred, after all is said and done. If
'noreturn' is specified, then the material will remain at the branch doing the checking in.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Passes prove t xt t/db_dependent
I was able to make this feature work as advertised.
As noted above, if you want a floating rule applied across all branches, adding a single default rule won't suffice, you'll need to add the rule to all branches. That issue is not related to the functioning of *this* patch however.
New sql tables:
- oai_sets: contains the list of sets, described by a spec and a name
- oai_sets_descriptions: contains a list of descriptions for each set
- oai_sets_mappings: conditions on marc fields to match for biblio to be
in a set
- oai_sets_biblios: list of biblionumbers for each set
New admin page: allow to configure sets:
- Creation, deletion, modification of spec, name and descriptions
- Define mappings which will be used for building oai sets
Implements OAI Sets in opac/oai.pl:
- ListSets, ListIdentifiers, ListRecords, GetRecord
New script misc/migration_tools/build_oai_sets.pl:
- Retrieve marcxml from all biblios and test if they belong to defined
sets. The oai_sets_biblios table is then updated accordingly
New system preference OAI-PMH:AutoUpdateSets. If on, update sets
automatically when a biblio is created or updated.
Use OPACBaseURL in oai_dc xslt
Changing columns to datetime instead of date
Squashed commit of the following:
commit ccf37880eaf660685d439b000298dcc025e78b6e
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Thu May 26 12:06:24 2011 +1200
Bug 5549 backing out of decision to change the name of the colums
commit 2e326fdec7d768fe93d41e93abf3ca665a363791
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Tue May 24 14:31:26 2011 +1200
Bug 5549 : Starting work on hourly loans, changing issues table
The kohastructure.sql file had the wrong name for the biblioimages table,
which broke the local cover images feature for new installations, and filled
the log with error messages.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
1) Checked a broken installation with wrong table name.
2) Checked for a new installation
Feature works perfectly.
http://bugs.koha-community.org/show_bug.cgi?id=7487
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adding foreign key constraint on biblio and borrowers:
- delete reviews when bibliographic records are deleted
- set set reviews.borrowernumber to NULL when patron records are deleted.
Before these constraints are set the database update script will
clean up existing instances of these problems by deleting reviews of
deleted biblios and setting to NULL reviews.borrowernumber for deleted
patrons.
In comments moderation, the list of comments will indicate "(deleted patron")
if the review was submitted by a patron who has since been deleted.
In the OPAC display of comments will omit the patron name altogether
if the patron has since been deleted.
To test:
1. CONFIRM THAT THE DATABASE UPDATE RUNS CORRECTLY
Before applying the patch:
- delete the record for a title which has a review
- delete a patron who has submitted a review (on a different title).
Viewing /cgi-bin/koha/opac-showreviews.pl should result in an error.
Apply the patch and make sure the database update runs. Viewing
the recent comments page in the OPAC should no longer result in an
error. The title with the comment from a deleted patron should
show no patron name on these pages:
- Recent comments (opac-showreviews.pl)
- Recent comments RSS (opac-showreviews.pl?format=rss)
- Detail page (opac-detail.pl)
Comments from other patrons should show correctly.
2. CONFIRM THAT NEW DELETIONS PERFORM CORRECTLY
After applying the patch:
- delete the record for a title which has a review
- delete a patron who has submitted a review (on a different title).
Viewing /cgi-bin/koha/opac-showreviews.pl should NOT result in an error.
The review of the title which you deleted should no longer appear in the
list of recent comments.
The title with the comment from a deleted patron should
show no patron name on these pages:
- Recent comments (opac-showreviews.pl)
- Recent comments RSS (opac-showreviews.pl?format=rss)
- Detail page (opac-detail.pl)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Offline circ : You now can upload all offline files from the Firefox extension.
Once all circ desks have uploaded the file, the librarian can apply all of them, sorted by date.
This avoid the problem of someone issuing an item on desk A, returning it on desk B.
Before this improvement, if desk B uploaded the file before A, the return was applied before the issue,
resulting in the items reamining issued.
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Comment from Liz:
I couldn't get this update to fire - I found a small syntax error in the
updatedatabase.pl for this, which I corrected with this patch.
Functionally, all of this works as tested (once the typos were fixed), but
this probably requires another sign-off.
QA notes: rebased on latest master. Also added index name `itemcallnumber`
to maintain consistency with all other indexes on items table.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The previous patches missed adding the upload_local_cover_images permission to
languages other than en, and used a forbidden TT construct, giving jenkins
agitas and indigestion. This patch adds the permission to other languages and
corrects the syntax.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
A frequently-requested feature for Koha, especially by special libraries, is
the ability to upload local cover images into Koha.
This patch adds a bibliocoverimage table, and image handling code in the
C4::Images module. Key features of the implementation include:
1. The ability to have multiple cover images for a biblio
2. Handling for "full size" (800x600) and thumbnail-size (200x140) images
3. Uploading images directly from the record view
The image display functionality by Koustubha Kale of Anant Corporation will
follow in a second patch.
Special thanks to Koustubha Kale and Anant Corporation for the initial
implementation of local cover images, and to Chris Nighswonger of Foundation
Bible College for his prior work on patron images.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Will add comments on Bugzilla.
Patch failed to apply because installer/data/mysql/sysprefs.sql had changed in master.
Corrected the same with this new patch.
This patch adds 2 columns in the aqorders table :
- claims_count : number of claims for an orders
- claimed_date : date of the lastest claim
In the lateorders.pl table, you can not select orders from different
supplier because there is just one letter sent after clicking the "Claim
order" button. So, it's logic that you want to select only orders from
this supplier.
Modification in C4/Letters.pm:
refactoring code for claimacquisition and claimissues letter type.
Now, fields for theses letters check the table name. It's not possible
to chooce aqorders.title, this field doesn't exist !
Furthermore, you can add a <order> tag around your item fields, like
this :
-- Begin example
<<LibrarianFirstname>>
<<LibrarianSurname>>
<<aqbooksellers.contact>>
<<aqbooksellers.address1>>
<<aqbooksellers.phone>>
<<aqbasket.basketno>>
<<aqbooksellers.phone>>
<order>Library : <<items.homebranch>>
In your possesssion : <<biblio.author>>. <<biblio.title>>.
<<biblioitems.publishercode>>, <<biblioitems.publicationyear>>.
Callnumber : <<items.itemcallnumber>>. doc type : <<items.itype>>
Barcode : <<items.barcode>>
Date for the return : <<items.onloan>>.</order>
<<LibrarianSurname>>
-- End example
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This documents the table that stores vendor info in Koha.
There were 4 unused fields found:
`accountnumber`
`othersupplier`
`currency`
`booksellerurl`
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Accountnumber is no longer unused and can be managed.
This first page makes the database change, and displays the field on
the detail.pl and moredetail.pl pages in the staff client
How to Test:
* Add a note to the materials specified page in cataloguing (952
subfield 3 for MARC21, but it shouldn't matter as long as you have a
field mapped to items.materials
* Check it displays at catalogue/detail.pl
* Check it displays at catalogue/moredetail.pl
Patch to follow to have the note display at checkin/checkout
http://bugs.koha-community.org/show_bug.cgi?id=7278
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts in updatedatabase.pl and kohastructure.sql
The fix for Bug 1883 seems to have lacked the necessary
update to the database to add the "patronreason" column
to the suggestions table. This patch does so.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch adds database update and change to kohastructure.
After this patch is applied, the patron's reason for
making a suggestion (form in opac) is saved to the database
correctly. The reason is also shown in the detail view
of the suggestion.
This needs to be backported to 3.6
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The comments on the biblio and deletedbiblio table
didn't mention the MARC21 subfields. This patch adds
that documentation in.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch documents the patron categories table in Koha.
There are a couple fields marked unused and a couple that aren't
documented because I wasn't sure:
* dateofbirthrequired
* bulk
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch documents the biblioitems and the deletedbiblioitems
tables. There are many fields left undocumented because I didn't see
information in them, but this is enough of a start to be helpful to
those writing reports.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch documents the deleted items table. Some fields were left
undocumented because I was unsure of what data was stored there:
stack - might be linked to shelving number, but need confirmation
paidfor - pretty sure this is unused, but don't want to document it that way
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch documents the items table. Some fields were left
undocumented because I was unsure of what data was stored there:
stack - might be linked to shelving number, but need confirmation
paidfor - pretty sure this is unused, but don't want to document it that way
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch documents the reserves and the old_reserves table.
Note that a few fields are marked unused: notificationdate and
reminderdate. Also two fields are left undocumented: lowestPriority
which never seems to be anything other than 0 and constrainttype which
is either 'a' or 0, but there doesn't appear to be any explanation
as to what each stands for.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Some code coming from BibLibre has been lost in the process of inclusion in
3.4. The result is that fine in days does not work at all (you can setup rules,
but it does nothing)
Step to reproduce:
- Koha > Admin > circ rules > set 1 day fine every day of overdue for default
rule
- Issue a book return date last week
- check-in the book => no debarment is set
The following patch will fix all of those problems by :
* updating borrowers.debarred to a date field (instead of tinyint). It contains
the limit of the debarment
* changing API of DebarMember and UpdateBorrowerDebarred to pass a date
* display debarrdate where applicable. Note that a debarrdate of 31/12/9999 is
considered as unlimited and not displayed
* added a debarrcomment, usefull to explain why a patron is debarred (this is
independant from debarrdate changes and can be used when placing an unlimited
debarment too)
[2011-05-12] F. Demians. It works as described. And I can confirm this
functionality is impatiently awaited by French libraries since one year. Thanks
BibLibre for the good work and for contributing this code.
Bug 6328 Followup--update DB structure
Thanks Katrin.
Bug 6328: make comment a textbox / fix debar by notice trigger
Debarring by notice triggers was broken, because the new function
expects a date as second parameter.
The comment field in patron account details was a very long text field.
Patch changes it to be a textbox instead.
Bug 6328: Lift debarment leaves patron account
'Lift debarment' redirects to an empty circulation page.
BZ6328 follow-up 3
Fixes comment 23 from Fernando L. Canizo : when the patron was debarred and debar removed
he still could not check-out.
The changes in the IsMemberBlocked (that were on biblibre/master) were lost somewhere
The sub was still checking for old_issues instead of calling CheckBorrowerDebarred
to get a debardate if applicable
Note : this bug was appearing only is you had issuing rules defined for itemtype/categorycode/branch.
Seemed to work if you had only default rules. That's probably why it hadn't been spotted before
BZ6328 follow-up 4
Comments fron Zeno Tajoli: The patch is OK and I sign-off it. Two little changes done on
installer/data/mysql/kohastructure.sql and installer/data/mysql/updatedatabase.pl
Signed-off-by: koha <koha@kohabase.localdomain>
Only contains db revision to insert new table need_merge_authorities.
You can apply the revision by running
cgi-bin/koha/installer/install.pl?step=3&op=updatestructure. (Will not change
your version while testing.)
Oct 19, 2011: Rebased after functionality patch signoff.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Show patron attributes in the sidebar on circ and patron pages
[Edit from Owen Leonard: This patch takes changes originally in
Bug 5436 and isolates just the parts relating to display of
patron attributes. Because function for pulling patron attributes
was merged with the function for displaying address information
in SetMemberInfosInTemplate() (also found in Bug 5749), I moved
the call to GetBorrowerAttributes into the individual scripts.
That keeps the functionality relating specifically to patron
attributes separate from the proposed changes to displaying
addresses.
Because I think it's important to keep the display consistent,
I added display of patron attributes to all pages which include
the patron information sidebar.]
Rebased for compatability with bug 3489 and database documentation by
Ian Walls, 9-21-11
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the suggestions database table. Several fields
appear to be unused:
* volumedesc
* publicationyear
* mailoverseeing
They are left undocumented by this patch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the virtualshelfcontents and virtualshelves
tables. In the virtualshelfcontents table the 'flags' field has
been left undocumented since there is no data stored in this
field.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the z3950servers table in Koha. There are two
fields marked as unused (icon and description) and two fields that
were left undocumented because they contain data, but I am unsure
of where the data is coming from (position and type). A follow up
patch will be necessary to document these fields.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the fieldmapping table which contains the data
associated with the Keyword to Marc Mapping administration area.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch defines the systempreferences table. Some of the fields
aren't actually used anymore with the new system preference editor,
but have been documented anyway.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch defines the overduerules table which includes information
from the Overdue Notice Status Triggers Tool.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch defines the itemtypes table. The definiton
for the summary field is a bit of guess based on the
description in the staff client, and might need some
clarification.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the statistics table. A few fields were left
undocumented.
'other' - unclear what this is used for
'proccode' - unclear what the number entered in this field stands for
'usercode' - always NULL on my system
'associatedborrower' - always NULL on my system
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the issues and old_issues tables. Two fields in
both tables are left undocumented - issuingbranch and return - because
I was unable to determine what data should be stored in these fields,
they are always NULL on my install. Feel free to edit with accurate
information.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Merge conflict fixed
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch defines the borrower attributes tables (borrower_attributes
and borrower_attribute_types).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The file was missing the starting comments before a few tables,
this patch adds those in for consistencies sake.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the branchcategories table and the
branchrelations table. Both tables are used in the library/
branch groups administration.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Documenting the branches table in Koha. Two unused fields noted, please update
if they are in fact used.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the deletedbiblio table, with the exception of the
seriestitle field which I could not find an example of.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch documents the biblio table, with the exception of the
seriestitle field which I could not find an example of.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This is one of many patches that will document the MySQL table
structure for Koha. This patch adds comments to the
authorised_values table.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Add comments to the SQL only, recreated table, works fine
This is the first of many patches that will document the SQL structure
in Koha. This patch adds comments to the borrowers table.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- dropped current database
- recreated database using the webinstaller
> borrowers table all ok
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This reduced execution time on the report from timeout (1400 holds waiting + 200 holds over) to 6 or so seconds, with 1566 holds over (test data, no holds waiting).
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The 2 fields added by the updatedatabase were not in the kohastructure.sql
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Change default value in overduerules table for delayn (NULL instead of 0) and fix GetBranchcodesWithOverdueRules function
Signed-off-by: Stéphane Delaune <stephane.delaune@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When adding a duplicate stocknumber the duplicate was not saved to the database.
This happened, because the field stocknumber in table items was declared to be unique.
Discussion on bug suggests to lift this restriction.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested. Corrected typo in updatedatabase script. Version 3.01.00.095 introduced the index with double s, although structure had only one s in index name.
Unaware of this bug, I entered the more general bug 6041 for similar problems with modifying items.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Implements the RFC found at http://wiki.koha-community.org/wiki/Hard_Due_Dates_Circ_Rule_RFC. See squashed commits
messages below for details of implementation.
Squashed commit of the following:
commit 871b91af00871146eb1216ebf5ce673dda2c5925
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Tue Dec 28 15:09:49 2010 -0500
Hard Due Dates dev part 3: implementing the due dates in circ
CalcDateDue now calls GetLoanLength, rather than each invocation running separately one after another. Therefore, instead of
the 'loanlength' param, CalcDateDue now takes 'itype', and uses the info to get both the issuelength and the hardduedate info (if it exists)
Global Due Date no longer populates in the sticky due date field in Circ, since it can't be determined before the item is scanned. Any specified
due date still overrides the circulation rules, if allowed.
Hard Due Dates in the past will return an error message, but can be manually specified if truly desired.
Also, a small fix to updatedatabase.pl to allow the old data to populate if possible.
commit 14d5505f3c01287a2464a759f0076c1d4b665c49
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 18:28:11 2010 -0500
HardDueDates dev part 2: adding admin interface
Adds columns to Smart Rules page, including calendar for easy date selection.
Removes globalDueDate and ceilingDueDates from system preferences editors
commit 76e3e3d86a7a54c6ce4253e7f68278b4dc75a0bb
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 15:58:05 2010 -0500
HardDueDates dev part 1: database changes
Adds two new columns to issuingrules, a hardduedate and a hardduedatecompare. If globalduedate is set, use that as the universal value
for all circ rules. Else, if ceilingduedate is set, use that as the universal value. Adjust the comparison accordingly (-1 before, 0
exact, 1 after). the old system preferences globalDueDate and ceilingDueDate are then removed.
Rebased onto 3.03.00.032
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Field enumchron in items table is now varchar(80).
We have records that need a much longer field, even up to 400 or 500 chars.
I suggest to change its type to TEXT (variable length with max 64K; tinytext
goes up to 255 chars and is just too short).
Mediumtext or longtext are not needed; as a side note these types are used in
the items table for e.g. booksellerid and more_subfields_xml..
Revised original patch thanks to Ian Walls: update kohatructure.sql. Copied the change in deleteditems as well.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Changes data type for currency.rate to accomodate bigger currency conversion rates.
FLOAT( 15, 5 )
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
More acq fields in staff interface - price, quantity, currency and totals
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tested with HEAD
> Should also apply to 3.2.x
( Not tested with 3.2.x)
Signed-off-by: Koustubha Kale <kmkale@anantcorp.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Follows up on previous patch to require that routing
list entries be linked to subscriptions and patrons.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
* renamed index; there was already an index named 'lang' on language_description
* removed reference to ersataz DB rev number
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Calculation of budget spent and encumbered is done by
queries on aqorders by budget_id
Index budget_id to speed these queries
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Changed type of lowestpriority from BOOL to tinyint(1) - BOOL was likely
OK, but made it tinyint(1) to match the rest of the flag columns. We
should look into converting those to BOOL en masse in 3.4.
Also made expirationdate nullable.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
updatedatebase is now setting aqorders.quantityreceived to NOT NULL
kohastructure needs bringing into line
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
