Original patch from Remi Mayrand-Provencher.
Amended by Marcel de Rooy (January 2017), part of omnibus bug 17908.
EDIT:
We cannot remove the ModAuthority call, since the reference record is
the result of the merge and should be saved.
Variable $overwrite is not used and can be removed.
It is not useful to postpone a merge to the cron job here, since the
old authority record is deleted. (Note that bug 9988 will address this
subject too.)
Removing the call to C4::ImportBatch::SetImportRecordStatus: Since
$recordid2 is not an import_record_id, this is useless and potentially wrong.
Removed the if statement for @errors, since it is not used at this point;
putting the result of a comparison into $error is not useful either.
Note: there is a lot of code in merge.pl around breeding that is actually
unused. Template tools/manage-marc-import.tt contains two unused blocks
final_match_link and match_link that contain a (unreachable) call to
authorities/merge.pl with parameters:
mergereference=breeding&authid=[% record_lis.match_id %]&authid=[% record_lis.import_record_id %]
It seems that this would show the records correctly, but would not merge
them correctly since that code expects two authority records.
Leaving the signoff of Mehdi since he essentially tested the merge call.
Test plan:
[1] Restart Plack and restart koha-indexer. (I had some problems related to
indexing as a result of the marcxml transition.)
[2] Go to Authorities.
Select two authorities to merge, start with two of the same type.
Make sure that both are used in a few biblio records.
Select at least one subfield from the authority to be removed for
inclusion in the authority to be kept ("reference record").
[3] Click Merge. You come back to the kept authority record.
Note: The number of attached records may not yet be updated. This depends
on the speed of koha-indexer. If you wait a bit and refresh, you should
have the correct number.
First check the authority record again for the inserted subfield.
Now check a biblio that was ALREADY attached to the reference record.
And check a biblio that was FORMERLY attached to the deleted one.
Note: See bug 17913 to see how pref AuthorityMergeMode impacts this.
[4] Try steps 2 and 3 again for a merge of two authority records that do not
have the same authority type noting the remarks below.
For instance try to merge from a CORPO_NAME to a PERSO_NAME record.
Make a change in say 040$a of the record to be deleted. And select that
field later on the merge form.
Normally, you would use the PERSO_NAME framework in the merge now.
When checking the authority record, look at 040a. When checking the
record that was linked to the CORPO_NAME, check if it contains the
PERSO_NAME authority in the correct field (say 100, 600, 700).
Signed-off-by: mehdi <mehdi@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested merging PERSO_NAME to PERSO_NAME and PERSO_NAME to CORPO_NAME.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Check if the instance does not exist (or was not even passed).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As requested by Jonathan on comment 10 on Bugzilla and supported by Tomas,
we should use the dev_install entry in koha-conf as a boolean flag.
Since we already used it as a path, this patch is not too strict about it.
If the entry is not empty and not equal to "0", we will interpret it as
a true value. The path is taken from the intranetdir entry.
Test plan:
[1] Copy debian/scripts/koha-functions.sh to /usr/share/koha/bin
[2] For a dev install:
Remove the dev install line, or toggle its value between empty string,
0 or 1 and each time test stop/start koha-indexer.
Check the path to rebuild_zebra with ps aux|grep indexer.
If you have no entry, an empty entry or a zero, you should see a regular
path.
(Note: You can do something similar with koha-start-sip.)
[3] For a regular install:
Remove the dev install line.
Stop/start koha-indexer or koha-plack, and verify that it still works.
Add a dev_install line with 0, and repeat stop/start.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the -d option to the documentation (with thanks to
Magnus Enger).
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[AMENDED February 10, 2017]
[1] Added reading /etc/default/koha-common as in the other debian scripts.
We need it for KOHA_HOME.
[2] Add a -d|--dev parameter for dev installs.
[3] No hardcoded PERL5LIB or KOHA_INSTALL_DIR (KOHA_HOME).
They are read from default file or set by adjust_paths_dev_install.
[4] Adjust template paths for dev installs: OPAC_TMPL, INTRANET_TMPL.
[5] Remove references to obsolete themes ccsr and prog.
Test plan:
[1] Regular package install:
Copy koha-translate to /usr/sbin.
Run koha-translate -l to show installed languages.
Run koha-translate -l -a to show available languages.
Add a language: koha-translate -i nl-NL.
Check template folders in regular location (/usr/share/koha/...)
Remove a language: koha-translate -r nl-NL. Check again.
[2] Dev install or kohadevbox:
Copy koha-translate to /usr/sbin.
If needed, add the <dev_install> line to koha-conf.xml.
Run koha-translate -l -d yourinstance to show installed languages.
(Note: You only see the languages installed in this instance.)
Add a language: koha-translate -i nl-NL -d yourinstance.
Check template folders in the clone.
Remove a language: koha-translate -r nl-NL -d yourinstance.
Note: Make sure you have sufficient file permissions for the kohaclone
files and koha-conf.xml. On kohadevbox you might need to run sudo
koha-translate within the the vagrant user context.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Use run_safe_xmlstarlet for plack workers and requests
[2] Simplify adjust_paths. The lazy export statement is actually enough to
replace adjust_paths by one direct call to adjust_paths_dev_install.
Test plan:
[1] Copy koha-functions.sh and koha-plack:
cp [YOUR_PATH]/debian/scripts/koha-functions.sh /usr/share/koha/bin/
cp [YOUR_PATH]/debian/scripts/koha-plack /usr/sbin/
where YOUR_PATH might well be /home/vagrant/kohaclone.
[2] Make sure that you have dev_install in koha-conf.
Stop and start koha-plack. Verify with ps aux|grep plack.
[3] Rename dev_install to nodev_install (in start and end tag).
Now stop/start koha-plack. Verify with ps aux|grep plack.
[4] Change plack_requests to 51 in your koha-conf.
Restart Plack and check that you see 51 in ps aux|grep plack.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In various scripts we use xmlstarlet to extract values from koha-conf.
If we call xmlstarlet on non-existing entries in koha-conf, this may
however result in silently failing scripts (when set -e is in effect).
A function run_safe_xmlstarlet is added for situations where the entry
might not exist. It will not halt execution.
This patch only adjusts koha-functions.sh and modifies the xmlstarlet calls
for dev_install and zebra_loglevels.
Note: The function does not need to check file existence. If the file does
not exist, xmlstarlet warns about it; the function returns empty string,
but does not set an error exit status.
Test plan: See second patch ("koha-plack adjustments").
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.
Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab
You should not see any differences from before and after this patch
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Acquisitions -> Suggestions
2) Notice no acquisitions sidebar
3) Apply patch and refresh page
4) Sidebar menu should now show.
Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use the $biblio_rs variable
In case of Koha::Object you can call new_from_dbic directly, however,
it fails for Koha::Objects so using an intermediary variable should
be done for consistency
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
prove t/db_dependent/Koha/Items.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
prove t/db_dependent/Koha/Checkouts.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes changes to acquisitions-menu.inc so that the style
matches that of the Administration and Tools sidebar menus. The links
are now divided up between Acquisitions (/acqui/) and Administration
(/admin/). The link-highlighting JavaScript used elsewhere has been
added.
To test, apply the patch and view the Acquisitions home page.
- Check that the "Acquisitions home" link is highlighted (bold).
- Test the other Acquisitions links to confirm that highlighting works.
- Click any link in the Administration section of the sidebar menu.
- Confirm that everything looks correct and works correctly.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This just add Koha::Notice::Message[s] for later uses.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This just add Koha::Letter[s] for later uses.
Test plan:
prove t/db_dependent/Koha/Notices.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
These packages should not be used outside the TT syntax scope.
A rewrite of Koha::Acquisition::Order[s] should be considered instead.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To make ACQ_NOTIF_ON_RECEIV TT compatible, we need to expose data from
the aqorders table. We already have a package for it in the Koha
namespace but it is based on Koha::Object[s].
The other path creates dummy Koha::Tmp::Order[s] packages to make it
usable. Of course we should use a valid Koha::Acquisition::Order[s]
based on Koha::Object, but it's outside the scope of this bug report.
This notice template is quite simple, and it's a good one to start.
From C4::Acq::NotifyOrderUsers, GetPreparedLetter is called with 4
elements: the library, the patron to notify, the biblio and the order
information.
Note that prior to this patch aqorders was filled from GetOrder, which
retrieved a lot of information from the acquisition table (aqbasket,
aqbookseller). The idea with the TT syntax is to access the data from
where it really exists. So if a user wants to display the basket name,
[% order.basket.basketname %] should be used instead.
Note that this will not work at the moment, the basket method is not
defined in the order package.
However the basic template should work as before.
The test added to TemplateToolkit proves that.
Test plan:
Use the default ACQ_NOTIF_ON_RECEIV to notify a patron that an order has
been received.
That generated template should be exactly the same as prior to this
patch.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch does:
[1] Remove unused $dbh.
[2] Move all mocking statements to one sub.
[3] Promote a few lexicals to globals when used in the subtests.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17909 and 17913 added a quick fix for Merge.t on UNIMARC records.
This patch improves that fix with the sub compare_fields, a merge from
compare_field_count and compare_field_order.
Also it adds the option to test MARC21/UNIMARC by adding a command line
switch that triggers mocking the marcflavour preference.
The test on a cleared field 609 in strict mode has been broken up in two
tests: first a count without 609 and then counting 609s only.
Note: Could have mocked GetMarcBiblio too, but decided to go this way.
Test plan:
[1] Run perl t/db_dependent/Authorities/Merge.t
[2] (For UNIMARC users:) Run perl Merge.t -flavour MARC21
[3] (For others:) Run perl Merge.t -flavour UNIMARC
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Form
1: Go to OPAC and click on add new list.
2: It takes you to Your Lists and not straight to add a new list
3: Apply patch
4: Refresh and when you click on new list it should take you straight to
add a new list
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds datatables to the upload results table.
Tools -> Upload
To test:
1) Go to Tools -> Upload
2) Put any search term in search box, click Search
3) Confirm table shows as datatable and sorting works on all columns
EXCEPT Actions
Sponsored-by: Catalyst IT
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the 'Locations' facet work as expected (i.e. having the
same behaviour it has for Zebra: picking the 952$c in MARC21 and 995e
for UNIMARC).
It also adds the code to handle holding and home library settings for
facets and makes the facets show the library name instead of the branch
code.
The mappings are updated so the labels match what facets.inc expect to
work properly.
To test:
- On master, do a search that returns biblios with items having
homebranch set.
=> FAIL: Under the 'Locations' label on the facets you will notice
branchcodes are shown.
- Apply the patch
- Restart memcached and plack (just in case, it was tricky)
- Reset your mappings:
http://localhost:8081/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
- Restart memcached and plack (again, not sure if needed)
- Make sure this mappings are set:
homebranch => HomeLibrary
holdingbranch => HoldingLibrary
(Note: it might not be set due to the place the yaml file is being picked)
- Reindex your records:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ perl misc/search_tools/rebuild_elastic_search.pl -d -v
- Repeat the initial search
=> SUCCESS: 'Location' contains the right stuff, 'Home libraries' and
'Holding libraries' too.
- Run
k$ prove t/db_dependent/Koha_SearchEngine_Elasticsearch_Search.t
=> SUCCESS: Tests pass!
- Sign off :-D
Note: play with the 'DisplayLibraryFacets' syspref options.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the cache has to be cleaned when marc structure is updated.
Before this patch, if the age restriction was not mapped, Reserves.t
failed with:
Tag "" is not a valid tag. at t/db_dependent/Reserves.t line 523.
Test plan:
Just confirm that the tests still pass and that the changes make sense.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
It seems that only removing the key MarcSubfieldStructure- should be
enough, but it does not hurt either to remove those four keys.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looks like it's caused by bug 13190.
Variable export_remove_fields is not sent to the template, let's
retrieve the syspref's value using the TT plugin.
Test plan:
Fill ExportRemoveFields with something (100a for instance)
Go on a checkout list page
At the bottom, the "do not export fields" input box should be pre-filled
with the content of the syspref
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
This is fine with me.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Seems to work fine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When a user gets an email, but doesn't act or visit it within two days,
attempting to create a new one causes a collision. We should just
delete the old one, assuming they still want to reset their
password.
To test:
create yourself a borrower with a userid and password.
Attempt a password recovery on the OPAC
update the entry in the database for that user to have an expired token
e.g. update borrower_password_recovery set valid_until = '2017-01-25
03:25:26' where borrowernumber = 12;
Attempt another password recovery operation - should error
apply the patch
Try it again - no error, new token is generated and additional email
with new link is sent.
Issue reproduced - is resolved by patch
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Without this patch get_age return actually 0 instead of
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When patrons don't have date of birth (which is not required) patron
search results on moremember page produce internal server error since we
can't convert MySQL invalid date 0000-00-00 to datetime object and
call strfdate on it.
Additionally, since we assign dates to template variables and after
than assign whole $data hash to template, later assigment overrides
previous one, so we see birth date field even for patrons which don't
have one.
This patch fixes both of those problems.
Test:
1. edit patron and remove it's birth date
2. try to search for it, and verify server error
3. apply patch
4. repeat search for patron and verify that it works and doesn't
have enpty birth date field
Signed-off-by: Grace McKenzie <grace.mcky@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Go to cataloging, and try something which depends on javascript -
collapse/uncollapse fields, open authority search window, ...
-> without patch it is not working
-> with patch it is working correctly
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Select2 (Bug 13501) introduced divs and inputs that broke some assumptions about the expected HTML structure.
This patch checks if input has name attribute, because some inputs in Select2 have not.
To test:
Try to add info from the authorities to field that has subfield with Select2 (subfield with authorised values on Koha 16.11+)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The goal of this development is to automatically generate items in Koha with
populated information based on a 9XX field and subfield, with the new syspref
MarcItemFieldsToOrder.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If no item is modified, the result page of Batch item modification says:
"item(s) modified (with fields modified)."
The message should be: "No items modified"
To reproduce:
- Go to Tools -> Batch item modification
- Put a barcode in and click Continue
- Do not make any changes and/or deselect all item(s)
- Click "Save"
=> Result message reads: "item(s) modified (with fields modified)."
To test:
- Apply patch
- Repeat steps above
- Verify that message makes sense.
NOTE: Also tested positive case with actual field change.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
-- apply first patch
git grep "C4::Plugin"
-- still two references
perldoc Koha::Plugins::Base
perldoc Koha::Plugins::Handler
-- apply this patch
git grep "C4::Plugin"
-- no references
perldoc Koha::Plugins::Base
perldoc Koha::Plugins::Handler
-- should look fixed
Please enter the commit message for your changes. Lines starting
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch does the following:
[1] Move some POD lines from Cache to Caches.
[2] Correct C4::Plugins to Koha::Plugins in POD line of Koha::Plugins
[3] POD Koha/AuthorisedValue.pm: lib_opac moved to opac_description
[4] The POD in Koha/Patron.pm uses head2 and head3 inconsistently.
Ran s/^=head2/=head3/ on those lines (7 substitutions on 7 lines)
[5] Correct a copied POD line from reports/issues_stats.pl in
reports/reserve_stats.pl.
[6] Correct a test description in t/db_dependent/Koha/Authorities.t.
You should never delete the library :)
[7] Correct typo shouild in a comment of rebuild_zebra.pl
Test plan:
[1] Read the patch. Does it make sense?
[2] Run perldoc Koha/Cache.pm and Koha/Caches.pm
[3] Run t/db_dependent/Koha/Authorities.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
