More changes to de-DE files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Needs Bug 13669
This patch fix web installer for
de-DE, es-ES, fr-CA, nb-NO and pl-PL
To test:
1) Apply patch
2) Try web installer for any/all listed languages.
a) de-DE, es-ES, fr-CA and pl-PL
There must be no problems for marc21 + all sample files
b) nb-NO
There must be no problems for normarc + all sample files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Start with a fresh database
2) Check mandatory bibliographic and authority files
load without problem using the German web installer
3) Check new fields/subfields are ok
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Not a german speaker but seems right :)
File loads without problem.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Easy this time, only sample notices have been changed:
- Changed discharge to match the English sample notice.
- Translated new PASSWORD_RESET e-mail
To test:
- Start with an empty database
- Install de-DE
- Run the web installer in de-DE/German
- Verify all files, especially sample notices, load
without any problems.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested removing all from letter table and loading file.
File loads Ok, notices look good.
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When doing a hacked install off the master branch:
use ... {koha database name}
truncate creator_layouts;
truncate creator_templates;
truncate printers_profiles;
source installer/data/mysql/... {name of a sample_labels type file}
Warnings are generated, which may not be visible in the UI.
Most of the warnings were triggered by:
-/*!40000 ALTER TABLE `creator_layouts` DISABLE KEYS */;
-/*!40000 ALTER TABLE `creator_layouts` ENABLE KEYS */;
http://dev.mysql.com/doc/refman/5.7/en/error-messages-server.html#error_er_illegal_ha
In the Russian, the layout_name was truncated, because the layout_name was only 20. An atomic update sql and kohastructure.sql update were provided to widen it to 25.
http://dev.mysql.com/doc/refman/5.7/en/error-messages-server.html#error_warn_data_truncated
Also fr-FR, ru-RU, and uk-UA were slightly different in structure, so the structure was made the same as the other files.
See comment #1 for the test plan.
NOTE: pl-PL is likely very out of date, but is not affected in this regard.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no more warnings
mysql> show warnings;
Empty set (0.01 sec)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some installer files still refer to password_allowed.
The print statement of the db revision has been slightly adjusted.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch updates the sql installer files for new installations.
Occurrences to the three plugins marc21_field_003, 040c and 040d are
replaced by marc21_orgcode.pl.
This has been generated by one sed statement.
Test plan:
[1] Run a new installation or run some of the changed sql files manually.
[2] Verify that marc21_orgcode is linked to fields previously linked to
the three old plugins.
[3] Do a git grep on the three plugin file names. No occurrences expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Have tested the three english sql files:
authorities_normal_marc21.sql: 18 rows with marc21_orgcode (003 and 040a
for 9 auth codes)
marc21_framework_DEFAULT.sql: 1 row with marc21_orgcode (003) -- this patch
does not add them to 040c or 040d; no behavior change..
marc21_simple_bib_frameworks.sql: 8 rows (003 for 8 frameworks)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The following files do no longer need an adjustment:
installer/data/mysql/de-DE/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
installer/data/mysql/es-ES/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
installer/data/mysql/it-IT/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
For details, check Bug 15097: Update MARC21 de-DE frameworks to Update 21.
And similar reports for es-ES and it-IT.
Verified this change by installing de-DE in the webinstaller. The plugin for
field 003 was correctly set to marc21_orgcode.pl.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It's a bit confusing to have RESERVESLIP named "Hold Slip", we should
finish the job and recode the slip.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Try printing a hold slip, you should note no difference
from pre-patch behavior
Followed test plan. The slip is triggered if you want to check out
an item that is reserved / on hold for another patron. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes code related to stopwords usage. The following methods are removed:
C4::Search->remove_stopwords
C4::Context->stopwords
C4::Context->_new_stopwords
And the buildQuery API was changed (removed the \@removed_stopwords return value).
A follow-up is provided for database changes, to make rebasing easier.
To test:
- Apply this patch
- Do some searches in both intranet and opac interfaces
- Nothing should break
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch simply renames fast add sql file in order
to load this file before default framework.
To test:
1) Do a marc21 install (de,en,es,it)
load all sample files
check Fast Add framework is empty (no fields/subfields)
2) Apply the patch
3) Do an install again, this time FastAdd must have values.
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Completes translations in German web installer sample files.
- Adds AddressFormat = German to the default system preference
settings.
To test:
- Run the web installer in German with all sample files selected
- Confirm no error messages are shown
- Bonus: if you speak German, check spelling and translations
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Updates the framework files using the po file based mechamism
provided by Bernardo.
To test:
- Check that changes make sense
- Run the Koha web installer for de-DE
- Confirm all 4 files changed here load without errors
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All files load without errors, pass marc bibliographic fw test
No errors
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
ERROR 1136 (21S01) at line 6: Column count doesn't match value count at row 1
Test Plan:
1) Start fresh install
2) Install all test data
3) Note the SQL error
4) Apply this patch
5) Repeat steps 1 and 2
6) Note no error
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All fixed files loads without problem.
No errors found
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 10020 has removed these columns, the should be removed from the
patron sample file.
Test plan:
Insert the files updated by this patch into a fresh DB, you shouldn't
get any error.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Before applying the patch, I was able to notice the error when loading the
patron sample SQL file to a DB. With the patch, it's solved.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- removes permission related text files from translated
web installer directories
- updates the permissions.inc file to include the newest
permission 'self_checkout'
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- remove DateTime->now()
- use Koha::DateUtils->dt_from_string;
- use Pod2usage for the usage
- use Modern::Perl
- use branches table
- Change letter code from MEMEXP to MEMBERSHIP_EXPIRY
- review comments implemented
- fix qa script comments
Bug 6810 - Fix QA failures
- MembershipExpiryDaysNotice system preferences arragned alphabetical order.
Bug 6810 - Add sample notices
- review comments implemented
- default value of is_html field in letter table is 0
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test
---------
1) Apply the patch
2) Export some MARC bibliographic records from Koha
3) Import those same MARC bibliographic records using the
"ISSN(022$a)" record matching rule.
4) The incoming records should match perfectly
5) Check the mysql tables (marc_matchers, matchpoints,
matcher_matchpoints, matchpoint_components,
matchpoint_component_norms) to make sure the values were
inserted as expected.
For new Koha installation
1) create the koha database
2) Go to the staff client page, and do a "fresh" install making
sure to select lots of optional marc 21 matching rules so
the .../marc21/optional/marc21_default_matching_rules.sql
gets triggered.
3) Check the mysql tables (marc_matchers, matchpoints,
matcher_matchpoints, matchpoint_components,
matchpoint_component_norms) to make sure the values were
inserted as expected.
Bug 14472 - Added Atomic Update to fix wrong issn search index
- Fix comments
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mubassir Ahsan asked on the Koha mailing list:
Is there any option to set Saturday as the first day of
the week? Please help me.
CalendarFirstDayOfWeek is currently either Sunday|Monday.
By converting it to 0|1|2|3|4|5|6
(Sunday, Monday, ..., Saturday), we can allow any day of the
week to be the first day of the week in the date picker.
TEST PLAN
---------
1) Backup DB
2) In mysql:
> DELETE FROM systempreferences;
> SOURCE .../installer/data/mysql/sysprefs.sql
> SELECT variable,value FROM systempreferences;
-- It should say 'CalendarFirstDayOfWeek' and '0'
May say '1' if you are using Norwegian.
3) Restore your DB
4) .../installer/data/mysql/updatedatabase.pl
-- If your previous value for 'CalendarFirstDayOfWeek' was
'Sunday', it should be '0'. For 'Monday', it should be '1'.
5) Test an installation with 'de-DE' as the language.
-- The default value should be '1'.
6) Test an installation with 'nb-NO' as the language.
-- The default value should be '1'.
7) In the staff client, confirm that any day of the week is
available in the I18N/L10N system preferences for the
CalendarFirstDayOfWeek dropdown.
-- I'm aware they aren't in order, but I'm after
functionality, not finesse.
8) In another tab, go to a staff place that has a datepicker.
For example, Home -> Tools -> Inventory/stocktaking
9) For each possible value in the CalendarFirstDayOfWeek,
go to the other tab, refresh the page after updating the
system preference, and click the datepicker icon.
-- The date picker should then start on the selected
day of the week.
10) Log into OPAC
-- This may require setting: opacuserlogin to 'Allow'.
11) Click the personal details tab on the left.
12) There is a date picker for the date of birth.
-- The date picker should then start on the selected
day of the week.
13) Run koha QA test tools.
NOTE: not an atomic update, since this is an old patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds the new notice for all other languages.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Removes the Smithsonian as a target installed with the
sample data during installation.
Also adds the newer LOC authority targets to files where
they were missing.
To test:
- Verify the Smithsonian has been removed from all
translated installers
- Verify the files are still valid SQL and install
correctly
NOTE: There was tiny scope creep which included ensuring
there were two Authority z39.50 servers as well.
Text files properly reflect the removal.
SQL 'source' of SQL files worked properly.
Was able to Z39.50 search for all of the 'en'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- translates new notice ACQ_NOTIF_ON_RECEIV
- translates new permissions
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested German install till "Gratulation, die Installation ist abgeschlossen"
No errors
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Same results noted as above.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested installation, checked new translations in Koha and deleted an extra
space in the ACQ_NOTIF_ON_RECEIV notice
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds DISCHARGE sample message to de-DE sample_notices.pl
(in GErman wording)
To test:
1) prove xt/sample_notices.t, it fails
2) apply the patch
3) prove again, this time no errors
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Right wording :)
Fixed version
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds DISCHARGE sample message to de-DE sample_notices.pl
To test:
1) prove xt/sample_notices.t, it fails
2) apply the patch
3) prove again, this time no errors
As original Bug 8007 sample message this is not translated,
so a German counter patch is welcome.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
As noted, a German counter patch is preferred. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fastadd framework ist missing a 100$a subfield, it has two 100$c instead.
This patch corrects English, German, Italian and Spanish .sql files.
Italian and Spanish need translations for the field name.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested running all sql files manually.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch inserts the new notification template into the letters table.
It also add the insert statements into the language specific files.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Amended patch: Add the kohastructure.sql changes
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This page changes 'Wanderned Sammlungen verwalten' to 'Rotationsbestände verwalten'
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch removes the 'isUrl' attribute from all 240$a fields in the various
frameworks. The change removes the broken link from the staff detail
MARC tab view.
Changes are a little easier to spot with: git diff --color-words HEAD^
To test:
- Load some or all of the frameworks
- Verify that 240$a is no longer marked as being an URL
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
942$e is mapped to biblioitems.cn_edition, which doesn't exist and
to an authorized value CN_EDITION, which doesn't exist either.
Patch removes the wrong mapping and non-existing auth value from
the frameworks.
To test:
- git diff --color-words HEAD^ is helpful
- Check all mappings are changed and SQL is still valid
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Adds translations for new permissions
- Adds ISO code to the sample currencies
- Removes a comment line about branchrelations from
sample_libraries (en)
To test:
- Run the German web installer with all sample data
selected
- Verify it runs without problems
- If you speak German - verify the translations make sense
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
No errors from the web installer. I verified that all the changes I saw
in the diff appeared correctly in the permissions. Currencies all
appeared to be correct after installation. Translations appeared to be
very German-looking.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The feed message transport type exists but nobody knows how it can be
used. This patch assumes nobody uses it and removes it.
Before removing the entry in the DB, the updatedb entry will check if no
foreign key exists in order to avoid a delete in cascade.
This path does *not* deletes the occurrences in the templates.
Test plan:
Apply this patch, execute the updatedb script and verify the
message_transport_types table does not contain the 'feed' entry if it was not
in use.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch will remove the confusing option to configure message texts for feeds.
Checked on a database with an existing feed type notice (not deleted) and
on one without any references to the feed message transport type (deleted!)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This bug adds a new preference, "SubfieldsToAllowForRestrictedEdition,"
but the use of the term "Edition" in this context is incorrect. I think
it would be more clear to change the preference name to
"SubfieldsToAllowForRestrictedEditing." This patch makes this change.
I realize this isn't a big issue since the preference has a good
description, but I thought that if we were going to make this as clear
as possible now would be the time to do it.
To test, start with a database which hasn't previously been used to test
Bug 7673. Apply all patches and run the database update. Follow the test
plan as described in the bug.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, change appears complete.
All tests and QA script still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
3 permissions:
- edit_items_restricted
- delete_all_items
- items_batchmod_restricted
2 system preferences:
- SubfieldsToAllowForRestrictedEdition
- SubfieldsToAllowForRestrictedBatchmod.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes subtag_registry.sql from lang dirs,
and put it on a new mandatory dir
In that way we need to update only one file.
All similar files are removed.
To test:
1) Try a new install, or simply create a new database,
grant permissions on it, change koha-conf.xml to use
this database and go to staff page
2) Go step by step until all mandatory or optional sql
files are loaded. Check that subtag_registry.sql is
loaded.
3) Do it again but on other language. First install
translation and repeat 2), could use de-DE or fr-FR
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested with de-DE.
Thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
