While this needs a username/pass to fully test, it should be possible to
verify the code changes by comparing to opac-results code
To test:
1 - Enable BakerTaylor images
2 - Enter your usernme and password
3 - Do not fill the BookStore URL
4 - Verify OPAC covers are working
5 - Save some times with covers to a public list
6 - Verify they do not display in list
7 - Apply patch
8 - Verify images now work
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
and remove uneeded '&'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We are incinsistent here, Amazon and Syndetics module are always loaeded in some places
BakerTaylor is conditional everywhere, and causes issues under plack
For simplicity sake I think we should just load this (small) module where it might be needed
To test:
1 - Disable Baker and Taylor images
2 - Restart plack
3 - Visit opac-readingrecord, opac-detail, opac-search, opac-shelves, opac-user
Log in to opac
Virew your reading history
Make/view a list
Search the catalog
Look at an individual title
4 - Enable BakerTaylorEnabled
If you don't have Baker and Taylor credentials, simply fudge them with bad data and enable
5 - Repeat steps above, in the word of Joubu "Kaboom"
6 - Apply patch
7 - Repeat 1-4
8 - You shoudl be able to load all the pages after enabling the pref
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies opac-shelves.pl so that login is required if the
requested operation is anything but "view" and "list."
The patch also modifies a couple of "Log in to create a new list" links
so that they point to the list creation form instead of opac-user.pl.
To test, apply the patch and go to the main lists page (the list of
lists) in the OPAC while not logged in.
- Click the "Log in to create a new list" link.
- Log in.
- You should be taken to the "Create a new list" form.
- Also test the "New list" link shown in the toolbar when you're
viewing the contents of a list.
- When not logged in click the "Lists" menu in the page's header menu.
Clicking "Log in to create a new list" should take you to the login
form and then to the list creation form.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We certainly faced 3 similar bugs due to this syntax: bug 23006, bug
22941 and bug 17526.
To prevent other issues related to this syntax this patch suggests to
replace them all in one go.
Test plan:
Confirm that the 2 syntaxes are similar
Eyeball the patch and confirm that there is no typo!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch moves markup for controls repeated across several OPAC
templates into a single include: Place hold, Request article, Add tag,
Save to lists, and Add to cart.
To test, apply the patch and view the following OPAC pages:
- Search results
- Shelf contents view
- User tags list
On each of these pages all the controls should work correctly:
- Place hold
- Request art
- Add tag
- Save to lists
- Add to cart
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies the sorting form on the OPAC list contents view so
that the two menus (sort field and direction) are combined into one.
This makes it consistent with the sort menu on the search results page.
To test, apply the patch and view a list with multiple titles on it.
Test the "Sort by" menu, trying all the various options. Confirm that
the pre-selected item in the sorting menu is correct after each re-sort.
Edit the list to change the default sorting and verify that the "Sort
by" menu reflects your selection.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Add a bibliographic record (that has a custom image) to a shelf,
view the shelf (OPAC).
You should see the image.
Sponsored-by: Orex Digital
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Giving sortfield a malformed value when viewing lists results in
Internal Server Error.
eg.
http://localhost:8080/cgi-bin/koha/opac-shelves.pl?op=view&shelfnumber=1&sortfield=title(
Note the trailing (
Before Patch: kaboom
apply patch
restart
After Patch: No kaboom
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This reverts commit 375dd35d53.
https://bugs.koha-community.org/show_bug.cgi?id=22836
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The category parameter should be restricted to 1 or 2 (private/public). In
order to keep same behavior, no parameter means 1 (private).
Note: Adding the same line in intranet counterpart.
Test plan
[1] Check for category empty, '1a', '11' etc. And with script ;)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Ensure the COinS span tag is still included on this pages. You need
to look into html source and search for span tag with class 'Z3988',
which has COinS string in title.
Staff client:
catalogue -> ISBDdetail
catalogue -> MARCdetail
catalogue -> detail
virtualshelves -> shelves
OPAC (you should have COinSinOPACResults system preference enabled):
opac detail
opac search
opac shelves
2) Run tests:
prove t/Biblio.t t/db_dependent/Biblio.t t/db_dependent/Koha/Biblio.t
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Tested with all 9 current patches. Works as advertised, including
OPACURLOpenInNewWindow. If a record has no items, no OpenURL link
is displayed. All the suggested tests pass. I did not test with
XSLT turned off.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note: This is here for information purpose, feel free to test it if you
wan to play with it.
TODO: C4::Reserves::_get_itype is not longer in use
No more GetItem must be returned by:
git grep GetItem|grep -v GetItemsAvailableToFillHoldRequestsForBib|grep
-v GetItemsForInventory|grep -v GetItemsInfo|grep -v
GetItemsLocationInfo|grep -v GetItemsInCollection|grep -v
GetItemCourseReservesInfo|grep -v GetItemnumbersFromOrder|grep -v
GetItemSearchField|grep -v GetItemTypesCategorized|grep -v
GetItemNumbersFromImportBatch|cut -d':' -f1|sort|uniq
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
DBMS can sort callnumbers correctly using cn_sort. We should use it
showing a list's content.
Test plan:
- Add items with callnumber to a list
- Display the list
- List the content by callnumbers
=> Confirm that the records are correctly sorted by callnumber
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In the staff client, when viewing the content of a list, it can be sorted by 'title', 'author' or 'call number' but not by 'date added'.
This patch adds 'date added' as an option for default sorting of lists. It also makes it available as a sorting option while viewing lists.
Test plan:
In the staff client and the opac:
1) View a list containing several items
=> Notice that you can't sort by 'date added'
2) Try to edit the list or create a new one
=> Notice you can't choose date added as the default sort order
3) Apply the patch
4) When viewing the list you should now be able to sort by date added
=> Make sure it orders correctly
5) Edit or create a list and choose date added as default sorting order
=> Make sure it uses date added as default
=> On the staff client: test that the filter for 'sort by' works for date added
=> On the opac: test that, while viewing the contents, choosing 'default sorting' in the dropdown menu sorts correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Following the pattern introduced by bug 19300, we are going to move the
OnShelfHoldsAllowed logic to Koha::IssuingRules->get_onshelfholds_policy
Test plan:
Make sure the onshelfholds policy is correct when placing a hold
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The issuing rule retrieve to know if a hold can be placed on a record of
a list is not correct.
Test plan:
0/ With item-level_itypes = item level
1/ Define a item.itype=BK and biblioitems.itemtype=CF
2/ Create a default rule to allow on shelf holds
3/ Create a specific rule for CF with on shelf holds="If any
unavailable"
4/ Add this bibliographic record to a list and view the list
=> Without this patch you will not see "Place hold"
=> With this patch applied you will see the "Place hold" button,
respecting the correct issuing rule
Followed test plan, patches worked as described.
Note: Just to clarify the test plan slightly in step 4 where it says you will not see 'Place Hold' it means to
the left of the 'Save to another List' link below the item availability
in the opac-shelves.pl page. Not the 'Place hold' button in the grey
page header box.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Change parameters to a hashref.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me.
Two calls in migration_tools/22_to_30 still in old style.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The subroutine C4::Biblio::GetBiblioFromItemNumber was wrong for several
reasons:
- badly named, we can get biblio info from a barcode
- SELECT * from items, biblio and biblioitems
makes things hard to follow and debug, we never know where do come from
the value we display
- sometimes called only for trivial information such as biblionumber,
author or title
This patchset suggests to replace it with calls to:
- Koha::Items->find for item's info
- $item->biblio for biblio's info
- $item->biblio->biblioitem for biblioitem's info
Test plan:
Item's info should correctly be displayed on the following pages:
- circulation history
- transfer book
- checkin
- waiting holds
QA will check the other changes reading the code, it's trivial
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Resolve warning from members/summary-print.pl:
"my" variable $itemtype masks earlier declaration in same scope
Test if find returns a Koha object in GetDescription.
Test if find returns a Koha object too in shelves.pl. While testing, I had
a crash on a biblioitem with itemtype NULL (bad record, but these things
tend to happen somehow.)
Can't call method "imageurl" on an undefined value at virtualshelves/shelves.pl line 253.
Same for opac/opac-shelves.pl.
Note: Did not add tests everywhere but generally, I have the impression that
we do not sufficiently test on the results of Koha::Object->find. Mostly we
just assume that it will find a record. Several reports include fixes to
resolve that wrong assumption.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The C4::Koha::getitemtypeinfo subroutine did the almost same job as
GetItemTypes. On top of that it returned the imageurl value processed by
C4::Koha::getitemtypeimagelocation.
This value is only used from the 2 [opac-]shelves.pl scripts. Then it's
better not retrieve it only when we need it.
Test plan:
Play with the different scripts touched by this patch and focus on item
types. The same description as prior to this patch must be displayed.
Note that sometimes it is not the translated description which is
displayed, but that should be fixed on another bug report. Indeed we do
not expect this patch to change any behaviors.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The two new columns as mentioned in the commit message of the table
revision must be used in the codebase now.
Highlighting some changes in Koha::VirtualShel[f|ves]:
[1] Additional methods is_public and is_private.
[2] Method add_biblio did not check permissions. Does now. No impact on the
interface, but one call in the unit test was affected.
[3] Method remove_biblios is signficantly simplified. Removed a FIXME.
[4] Method can_biblios_be_removed now redirects to can_biblios_be_added.
A followup report may deal with unifying those routines.
[5] Condition in get_some_shelves changed.
[6] The reference to allow_add in get_shelves_containing_record can simply
be removed.
opac-shelves.pl and shelves.pl now pass the default setting of Owner only
to the template.
Templates shelves.tt and opac-shelves.tt now include the new permission
field with three choices as mentioned in the table revision patch.
opac-addbybiblionumber.pl and addbybiblionumber now need a check on
allow_change_from_owner; search conditions slightly adjusted to the new
permission scheme.
Test plan:
When we refer to visibility in the test plan, please check the Add to-combo
on opac search results and staff results. And check opac-addbybiblionumber
by clicking Save to Lists from opac results.
The step 'Check delete' means: open the list in opac and check if you see
the Delete button below the entries (only check, do not delete).
[ 1] Create private list I01 (perm=Owner)
[ 2] Check visibility: Seen.
[ 3] Add a book. (Change by owner should be allowed.)
[ 4] Check delete: Yes.
[ 5] Edit list I01, set perm=Nobody
[ 6] Check visibility: Not seen.
[ 7] Check delete: No.
[ 8] Share list I01 with another patron.
[ 9] Check visibility for the other patron: Not seen.
[10] Check delete for the other patron: No.
[11] Change permission of list I01 to Anyone (by owner).
[12] Check visibility for the other patron: Seen.
[13] Let other patron add a book (change is allowed).
[14] Let owner delete the same book again (change allowed).
[15] Create public list U01 (perm=Owner)
[16] Check visibility: Seen.
[17] Add a book. (Change by owner should be allowed.)
[18] Login as other user. Check visibility: Not seen. Check delete: No.
[19] Change permission of U01 to Nobody (by owner)
[20] As owner: Check visibility: Not seen. Check delete: No.
[21] As other user: Check visibility: Not seen. Check delete: No.
[22] Create public list U02 (perm=Anyone)
[23] Add a book by owner.
[24] Delete the same book by other user. Add another book.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TEST PLAN
---------
1) have books entered
2) log in create a list
3) add books to list
4) display list
5) click the RSS link button.
-- bad HASH error.
6) apply patch
7) repeat steps 4&5
-- readble junk without error messages.
8) run koha qa test tools
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See bug 15809 for more references.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It has been reported that
/cgi-bin/koha/opac-shelves.pl?op=edit&referer=view&shelfnumber=146&owner=4&shelfname=testX&sortfield=titleaaaaaa\`&category=1
Could lead to SQL injection
Actually it explodes because the generated SQL query is not correctly formated.
However it would be good to limit the possible values for sortfield.
This vulnerability has been reported by MDSec.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Instead of DBIx::Class objects.
Test plan:
1/ Add content to a list and share it with another patron
2/ Try to view the list with the other patron
3/ download and send a shelf and check if the biblio list is correct
4/ prove t/db_dependent/Virtualshelves.t should return green
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
At the OPAC, if a user manipulate the URL to show a list (s)he is not
allowed to view, the list's name will be displayed anyway.
Test plan:
- Create a private list with user A
- Copy the op=view URL and access it with user B logged in
=> Without this patch, you will see the rss icon, the list's name and
the "add list" button
=> Without this patch, only the "unauthorized" box will be displayed
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the frameworkcode option param, using each record's frameworkcode
as expected by the filter. Otherwise the ViewPolicy filter falls back to the
default framework.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Koha::RecordProcessor and the defined filters are supposed to bring us
joy and happiness. Let's keep the code compact, simple and clean.
This patch removes record cloning all over the place.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are still some leaks, but it is not as a result
of the filter, but rather a result of poorly written
template files.
Bug fixing template files is beyond the scope of this
set of patches.
TEST PLAN
---------
1) Backup your DB
2) run the following SQL on your DB.
> UPDATE marc_subfield_structure set hidden=-8;
-- this should set EVERYTHING to hidden across the board.
3) In staff client, set OPACXSLTDetailsDisplay to blank
4) In OPAC, view any detail.
-- Normal view may mostly leak values still.
-- MARC view may leak values.
-- ISBD view may leak values.
5) In staff client, set OPACXSLTDetailsDisplay to default
6) In OPAC, view any detail.
-- same issues as step 4
-- 'View Plain' may leak too.
7) 'Save record' -> 'Dublin Core'
8) Apply this patch
9) run koha qa test tools
-- should be fine
10) prove -v t/db_dependent/Filter_MARC_ViewPolicy.t
-- should pass
-- this proves Koha/Filter/MARC/ViewPolicy.pm tweaks too
11) In OPAC, view any detail.
-- Normal view:
-- Material type comes from the LEADER field.
-- Lists this is on will still display
-- 'Tags from this library' will still display
-- Item information in table will still display
(THIS IS BEYOND SCOPE)
-- MARC view:
-- Record number is leaked
(THIS IS BEYOND SCOPE)
-- 'View plain' leaks LEADER field.
-- ISBD view may leak field headings, but not values.
(THIS IS BEYOND SCOPE)
12) In staff client, set OPACXSLTDetailsDisplay to blank
13) In OPAC, view any detail.
-- same kind of output as step 10
14) 'Save record' -> BIBTEXT
-- Should be next to nothing leaked.
15) 'Save record' -> Dublin Core
-- Should be the same or less leaked between the two versions.
-- (XML FILTERING IS BEYOND SCOPE)
16) In the staff client, go view the same record.
-- it should be mostly hidden in ISBD View.
17) run the following SQL on your DB.
> UPDATE marc_subfield_structure set hidden=1;
-- this should set EVERYTHING to hidden in OPAC, but not
the STAFF across the board.
18) Refresh the staff ISBD page
-- values should reappear.
19) View the ISBD details in the OPAC
-- values should still be hidden.
20) Check out the OPAC Cart and List
-- while the intermediate pages may still leak
the download links should leak very minimally.
-- (CARTS AND LISTS ARE BEYOND SCOPE, THOUGH
THE INTRANET ISBD AND SOME CART/LIST STUFF
WERE FIXED BECAUSE OF THE GetISBDView REFACTOR)
Expectations:
Before Patch - all the OPAC Detail pages will display things
After Patch - all the OPAC Detail pages will display much less,
and hopefully nothing (though there are known limits).
the ISBD detail page in the Staff client will be
filtered as well based on STAFF settings.
The saving/exporting should generate nearly empty
files.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the new sysprefs work as the previously defined. Instead of falling back
to what *ResultsDisplay is set, it now has its own 'default' (that still defaults to the
*Results*.xslt).
The default values are set to 'default' as the rest of XSLT-related sysprefs, and the upgrade
picks whatever is set in OPACXSLTResultsDisplay and XSLTResultsDisplay so current behaviour
is preserved.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
New XSLTs for Lists work as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan noticed the current behaviour is that the lists rendering
falls back to the XSLTResults, and if not defined (i.e. != 'default' and
!= some_path) it falls back to a legacy display (non-XSLT).
The patchset changed this behaviour because 'default' is not a valid value
for the lists. So it should fallback to the current behaivour (i.e. Results
XSLT configuration) if not defined. This patch fixes this by adding
|| C4::Context->preference('XSLTResultsDisplay')
(and the OPAC counterpart).
It also fixes minor glitches on the update message (oops) and bad default value
in sysprefs.sql for 'XSLTListsDisplay'.
Thanks Jonathan!
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the shelves.pl (staff) and opac-shelves.pl scripts
use the new sysprefs for specifying custom XSLTs for lists display.
XSLT.pm is patched so it defaults to the corresponding *Results.xsl
files if none is specified.
To test:
- Create a list
- Open the list in the staff interface
- On a new tab, open the list in the OPAC.
- Apply this patches
=== default behaviour
- Open the list (both opac and staff) on new tabs
=> SUCCESS: They look exactly the same (hint: the syspref is set to ''
so it should fallback to using the one we were using.
=== using the new functionality
- Create custom XSLTs for lists, for example:
$ cd /home/vagrant/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/xslt
$ cp MARC21slim2OPACResults.xsl MARC21slim2OPACLists.xsl
- Edit your sysprefs, setting OPACXSLTListsDisplay to:
/home/vagrant/kohaclone/koha-tmpl/opac-tmpl/bootstrap/{langcode}/xslt/MARC21slim2OPACLists.xsl
- Reload the OPAC list view
=> SUCCESS: Looks exactly as before
- Make some minor tweak (for example in line 423 replace
<xsl:text> </xsl:text>
for
<xsl:text> BLAH </xsl:text>
- Reload the list
=> SUCCESS: BLAH shows in several places on the title.
- Repeat for the staff interface
- Sign off :-D
So we can now set custom XSLTs for lists.
Sponsored-by: Carnegie Stout Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Deb Stephenson <DStephen@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the lists work as the search results for rendering on
XSLT-driven context. No behaviour change is expected.
To test:
- Apply the patch
- Navigate lists (OPAC and intranet)
=> SUCCESS: the only difference is speed (faster)
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the occurrences of
my @foo = $cgi->param('foo');
with
my @foo = $cgi->multi_param('foo');
perl -p -i -e
's/^(\s*my\s*@\w+\s*=\s*)\$(cgi|input|query)\->param\(/$1\$$2\->multi_param\(/xms'
**/*.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Test plan:
- Empty OPACXSLTResultsDisplay system preference,
- select a virtual shelf in the dropdown list "Lists" on navigation bar
(Or create one and add records),
- check that records are correctly displayed (title, author, publisher
etc...).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Display is now correct
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch makes icons point to the OPAC path instead of intranet's.
To test:
- On current master/3.22.x
- Have some itemtypes with icons set
- Have some biblios matching the itemtypes
- Add them to a public list
- Do a search in the OPAC for any of those biblios
=> SUCCESS: icons show correctly
- Choose the list
=> FAIL: icons fail to show, URL points to /intranet-tmpl/....
- Apply the patch, reload
=> SUCCESS: icons show correctly
- Sign off :-D
Sponsored-by: American Numismatic Society
NOTE: I had to set item-level_itypes to 'biblio record'
in order to trigger this. My icon's showed, but the
path was wrong. This patch corrects it.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
1/ At the opac, go on the the list home page (opac-shelves.pl)
2/ Click on 'new list', create a list and save
=> You should be redirect to the list
3/ Click on edit, save
=> You should be redirect to the list
4/ Delete the list
=> You should be redirect to the list
5/ Edit a list from the list view, save
=> You should be redirect to the list
6/ Click on a list link (op=view)
7/ Edit the list, save
=> You should be redirect to the 'show' view
8/ Delete list
=> You should be redirect to the list
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch fixes the following bug:
If OpacAllowPublicListCreation is set to "not allow", the creation of a
private list raises an error at the OPAC.
CGI->param is called in a list context and some parameters are not
filled from the template if the pref is set to "not allow".
To make sure we don't have a "Odd number of elements in anonymous hash",
we force the context to scalar.
Test plan:
1/ Set OpacAllowPublicListCreation to "not allow"
2/ Create private and public lists at the OPAC and the intranet
=> Everything should work fine with this patch applied
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The order_by parameters should not be "$direction $order_by" with
quote_names enabled. The correct syntax is { -$direction => $order_by }
Test plan for Opac + Staff interfces:
Sort list by title or whatever and change the direction
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
There are 2 places where a list can be edited/deleted: on the list view
and the list content view. After the edition, the user expect to be
redirect to the previous page.
This patch implements that.
Test plan:
At the OPAC, delete and edit a list from the 2 differents places.
Confirm that you are redirect to the page you come from.
With patch, redirects work as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
If the user knows the URL for OPAC lists they can access them even with
the virtualshelves preference turned off. This patch copies the solution
added to opac-topissues.pl by Bug 10595 and applies it to OPAC lists
pages.
To test, apply the patch and set the virtualshelves system preference to
"don't allow."
- Navigate to /cgi-bin/koha/opac-shelves.pl. You should be redirected to
an Error 404 page.
- Also check:
- /cgi-bin/koha/opac-shareshelf.pl.
- /cgi-bin/koha/opac-downloadshelf.pl
- /cgi-bin/koha/opac-sendshelf.pl
- /cgi-bin/koha/opac-addbybiblionumber.pl
- Turn virtualshelves back on. Access to lists and list sharing should
be restored.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
See comment 171 and 172 for more details.
This patch mainly fixes typo or silly error in templates.
It also uses the relationships added by previous patch to join the
biblioitems and items tables (changes in opac-shelves.pl and
shelves.pl).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The user should not be allowed to create a new list and get a friendly
error message if he tries.
The "New list" links are removed.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
