Steps to reproduce:
1. On cataloguing, open the 007 builder.
2. Choose material type 'Video recording'
3. On 04 choose g - Laserdisc
4. Click save
=> SUCCESS: 'g' correctly shows on the 007
5. Edit the 007 again
=> FAIL: on 04, 'g - Laserdisc)' is displayed
6. Apply this patch
7. Repeat 4 and 5
=> SUCCESS: no trailing ')'
8. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch revises the wording of the warning which is displayed on the
'About' page when the 'OPACPrivacy' system preference is enabled but the
'AnonymousPatron' preference is empty. The new phrasing is hopefully
more clear.
To test, apply the patch and go to Administration -> System preferences.
- Search for 'AnonymousPatron' and enter a borrowernumber if necessary.
- Log in to the OPAC and click the 'Privacy' tab in the left-hand
sidebar of the user summary page.
- Set your privacy rule to 'Never'.
- Return to Admnistration -> Sytem preferences in the staff interface.
- Search for 'OPACPrivacy' and set it to 'Allow'.
- Clear the borrowernumber from the 'AnonymousPatron' preference.
- Go to the 'About" page and open the 'System information' tab.
- You should see an error message at the bottom:
"Some patrons have requested privacy after their items are checked in,
but the AnonymousPatron preference is not set correctly. Set it to a
valid borrower number or checkins for these patrons will fail."
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Same patch as
commit bee2b3d33e
Bug 33949: Fix display of old checkouts if no checkouts exist
But for the staff interface.
"""
If we pass an empty array from the perl controller, we retrieve an empty
string from the template, and the merge does not work.
This patch fixes the following bug:
Pick a patron without checkout history
Check them an item out and check it in
=> The table is empty, whereas it should display the item that has been
checked in.
"""
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Koha::Patron->issuer is not covered by tests!
Test plan:
1. Set RecordStaffUserOnCheckout to "record"
2. Check an item out and in to a patron
3. Go to their circulation history
=> Without the patch you get an error
=> With this patch applied the table displayed correct. The "checkout by" column contains the name and the link to the librarian
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add two requirements when registering a new patron:
- A child patron must have a guarantor. This is controlled by
a new syspref ChildNeedsGuarantor.
- A guarantor cannot be a guarantee.
Test plan:
1. Add a child patron without guarantor or child patron with guarantee
as guarantor succesfully.
2. Apply this patch.
3. Add a child patron as a guarantor.
=> Error is raised.
4. Turn syspref "ChildNeedsGuarantor" ON.
5. Add a child patron without a guarantor and error "Child needs a
guarantor" is raised.
6. Add guarantor. Guarantor can either be existing patron or added with
"Contact" section.
=> Save without errors.
Also prove t/db_dependent/Koha/Patron.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch simply adds a note to the CookieConsent and CookieConsentedJS
system preferences to link to the HTML customizations page and hint at
which customization should be used to affect the components governed by
the preferences.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For partial receives with items created on order, the
aqorders_items table was not correctly updated when only
some of the ordered items were received.
To test:
1) Create a basket with creating items on order
2) Create an order line with 3 items
3) Close basked
4) Receive shipment and create invoice
5) Receive your created order line
6) Edit first item displayed, add barcode
7) Check checkbox and receive
8) Verify the order line has been split 2:1
9) Receive again - notice all 3 items are showing.
We should only see the remaining 2
10) Undo receive
11) Apply patch
12) Repeat steps 5)-9)
13) Verify that in step 9) only the remaining 2 items display now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Check an item in with already a confirmed hold
2) Cancel the hold, it was cancelled without possibility to choosing a
reason
3) Apply this patch and do it again, you must see an input to choose
your cancellation reason (list from VA)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to Administration > Did You Mean
2. Attempt to drag and drop plugin options.
--> Confirm that they are not draggable
3. Apply patch and clear browser cache
4. Reload the page
--> Confirm that drag-and-drop now works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Verify that you can filter by reset password.
And that the uppercase code is replaced by a description.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckHelpMessage system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckHelpMessage
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckHelpMessage is now stored there.
- The HTML customization entry form should offer SelfCheckHelpMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckHelpMessage HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and click the "Help" link at the
top.
- On the help page, confirm that the SelfCheckHelpMessage content is
shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckHelpMessage." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckInMainUserBlock system preference into
HTML customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckInMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckInMainUserBlock is now stored there.
- The HTML customization entry form should offer
SelfCheckInMainUserBlock as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckInMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self check-in system and confirm that the
SelfCheckInMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckInMainUserBlock." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SCOMainUserBlock system preference into HTML
customizations, making it possible to have language- and
library-specific content.
The patch also makes a minor fix to CSS in order to get the "Back to
top" link to show up correctly in self-checkout and self-checkin.
To test you should have some content in the SCOMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SCOMainUserBlock is now stored there.
- The HTML customization entry form should offer SCOMainUserBlock
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SCOMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and confirm that the
SCOMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SCOMainUserBlock." It should return no results.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Removes two occurrences and a commented one.
Test plan:
[1] Go to cataloguing editor. Open dev console. Clone 500.
[2] Go to Admin/Did you mean. Try to toggle options.
With this patch it works. Without this patch, JS errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test:
1. Place a hold
2. Check-in an item of the held record
3. No hold modal 😱
4. APPLY PATCH
5. Hold modal!!!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves form any staff_searchable attribute being automatically
included in the the Standard patron serch, to allowing the librarian to choose.
Current searchable attributes will be marked as 'searched_by_default'
To test:
1 - Add a searchable patron attribute type
2 - Add some values
3 - Confirm they are searched in a 'Standard' patron search
4 - Apply patch
5 - Go to admin - >patron attribute types
6 - Note new 'Searching' column
7 - Confirm attribute is 'Searched by default'
8 - Confirm searches work as before
9 - Edit the attribute type
10 - Uncheck 'searched_by_default'
11 - Save
12 - Confirm attribute not searched in 'Standard' search
13 - Select the attribute in patron search dropdowns
14 - Confirm it is correctly searched
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement allows libraries to modify an existing orderline and increase the quantity in the order. The quantity is increased by adding more items to the order, through the usual Item for which is visible when adding or modifying an order.
To test:
1. Ensure you have a budget, fund, vendor etc. to use the Acquisitions module
2. Open a new basket. Make sure you do NOT check the 'orders are standing' option
3. Add an order to the basket using any method. Add an item or more to this orderline and save the order to the basket
4. Click Modify to edit the orderline
5. Notice the quantity text field. Try to directly change this number. You'll get an error pop-up and be redirected back to the basket.
6. Apply the patch, restart services, refresh the basket page
7. Click Modify to edit the orderline
8. Notice the item form and Items list table is visible with your existing item(s) for this order. There should be no Action buttons as actions can't be done on an existing item order.
9. Confirm you are able to add more items to the Items list and to the order by filling out the form and clicking 'Add item' as normal. Confirm the quantity increases accordingly.
10. Confirm the Edit and Delete buttons for newly added items work as expected
11. Save and confirm the quantity for the orderline has increased
12. Confirm this behaviour persists with the other methods of adding new orders to a basket
Sponsored-by: Pymble Ladies' College
Signed-off-by: Katariina Hanhisalo <katariina.hanhisalo@xamk.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OpacSuppressionMessage system preference into HTML
customizations, making it possible to have language- and library-specific
content.
To test you should have some content in the OpacSuppressionMessage
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff interface, locate a bibliographic record and open it for
editing.
- Under tab 9, tag 942, change subfield n, "Suppress in OPAC", to "Yes"
and save the record.
- Go to the OPAC and try to navigate directly to the bibliographic
detail page for that record:
/cgi-bin/koha/opac-detail.pl?biblionumber=X
- You should be redirectd to the "Blocked" page. Under the message "You
are not authorized to view this record" you should see the content
which was previously in the OpacSuppressionMessage system preference.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacSuppressionMessage is now stored there.
- The HTML customization entry form should offer OpacSuppressionMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the OpacSuppressionMessage HTML customization and add unique
content to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation. Try to view
the suppressed record again and confirm that the content you added
for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"OpacSuppression." The description of these preferences should show an
updated message about using HTML customizations to create
OpacSuppressionMessage content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This renames the notices and slips module from
Patrons toolbar (slip) to Patrons (custom slip)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new module to letters 'patron_slip' / Patrons toolbar
(slip)
This also combines some of the slip printing JS to make things more
direct
To test:
1 - Apply patch
2 - restart_all
3 - yarn build
4 - Confirm you can print slip, summary, quickslip, and checkin slip
when viewing a patron's account
5 - Enable DisplayClearScreenButton syspref, and test that it works
with both values
6 - Go to Tools->Notices and slips
7 - Define a new notice in the 'Patron toolbar (slip)' module
8 - Enter content like below in the 'Print' transport:
Patron has [% borrower.holds.count %] holds
List of holds:
[% FOREACH hold IN borrower.holds %]
===============================
Reserve id: [% hold.reserve_id %]
Title [% hold.biblio.title %]
[% END %]
9 - Go to patron scree
10 - Note new option under 'Print'
11 - Print the new slip and confirm it works (try with and without
placing holds for patron
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the Damaged radio box options ( Ignore, yes, no ) in favor a full damage status search option
To test:
1. APPLY PATCH, restart services.
2. Make sure you mark some items as damaged.
3. Go to the item and search and limit by 'Damaged'
4. You should only see your 'Damaged' items.
5. Export the results as a CSV, make sure the CSV is well-formed and accurate.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidied.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch follows the logic of bug 32166 and adds specific inputs for each order to avoid any misalignment when some records are not imported
To test:
1 - Find a vendor in acquisitions
2 - Create or find an open basket
3 - Add to basket form a new file
4 - Stage file and add to basket
5 - Select the second record in the list
6 - Enter price info
7 - Save (don't forget, you need to set item type in the second tab)
8 - The order has no price info!
9 - Apply patch
10 - Repeat 3-7 above, staging file fresh
11 - Confirm order has correct prices
12 - Test with a file with many records
13 - Confirm any combination of choosing/skipping records works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds Bootstrap classes to the "Add" button on the curbside
administration page, in the "Curbside pickup hours" section. This makes
it consistent with the markup of similar buttons in the interface and
makes it slightly smaller so that it fits better in the form.
To test, apply the patch and make sure the "CurbsidePickup" preference
is enabled.
- Go to Administration -> Curbside pickups.
- Fill out the form, including the "New slot" fields in the "Curbside
pickup hours" section.
- Confirm that the corresponding "Add" button looks correct, and that
it works to add your new slot.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Make sure MARC21 is mentioned, as this only updates MARC21 XSLT files
* Move ending punctuation outside the pull down
* remove 'obey' - it's not needed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When using the facets for author, i.e. limiting a search, it makes sense to preserve the default sort order for the results (relevance, etc)
When clicking on an author to search the catalog for all works by an author, it would be nice to be able to optionally specify sorting for the listing - i.e. publication date, or title
This patch adds two new system preferences:
AuthorLinkSortBy
AuthorLinkSortOrder
To test:
1 - Do a search in intranet and staff for 'austen'
or an author you have multiple titles from
2 - Click the linked name
3 - Note a new search is performed, sorted by field from
defaultSortField preference
4 - Apply patch, updatedatabase, restart_all
5 - Ensure nothing has changed by searching again
6 - Set AuthorLinkSortBy to 'date of publication' and
AuthorLinkSortORder to asc
7 - Search again, comfirm links obey sorting specific above
8 - Test other values - confirm links are updated in both staff/opac
and results/details
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves code form scripts to a template plguin and unifies the calls
To test:
1 - Add a searchable patron attribute type
2 - Add values to several patrons and test patron searching from
Patrons home
Patrons search results
Holds request screen
Article request screen
Patron search sidebar
3 - Apply patch
4 - Confirm results are the same
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This changes how the required appears. Now it will display 'our'
text for requires fields instead of using the browser default.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There were references to ForceLibrarySelection and ForceLibrarySelection (notice
the additional d) in the patch.
Standardized to: ForceLibrarySelection
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the ability to force staff to select a library when
logging into the staff interface. This is done via a new system
preference: 'ForcedLibrarySelection'
To test:
1) Apply patch, restart_all, and updatedatabase
2) Log out of the staff interface. Notice the login form looks the same
and the "Library:" dropdown has 'My Library" selected as default. Log
back into the staff interface.
3) In Administration, search for the system preference
"ForcedLibrarySelection". Set it to 'Force' and press save.
4) Log out of the staff interface. Notice that this time, the "Library:"
dropdown is required and has a blank selection as the default.
5) Fill in the username and password but do not select a library. Click
'Log in'
6) Notice you cannot log in and are asked to 'Please select an item in
the list'
7) Select a library from the drop down and click 'Log in'
8) Notice the login was successful and you were logged in to the library
you selected.
9) Try loggin in with some other libraries to verify it works as
expected
10) Sign-off :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch add a Quantity field and a Cost field to the manual invoice form this will allow to automatically multiply the amount when it has a default amount.
Test plan:
1) Apply the patch
2) Create multiple charge types some with default amount and some without default amount
1-1) Go to Administraion -> Debit types
1-2) Click on New Debit types
1-3) Fill the form check the "Can be manually invoiced?" field
1-5) Click on save
3) Create a manual invoice
2-1) Find a patrons
2-2) Click on Accounting tab
2-3) Click on Create manual invoice tab
2-4) Select a type with default amount set
->Cost field and Quantity field should be added to the form
2-5) Edit the Cost field or Quantity field
->The amount will be automatically calculate
2-6) Select a type with no default amount set
->Cost field and Quantity field should not be added to the form
Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the PatronSelfRegistrationAdditionalInstructions system
preference into HTML customizations, making it possible to have
language- and library-specific content.
To test you should have some content in the
PatronSelfRegistrationAdditionalInstructions system preference before
applying the patch. Apply the patch and run the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content previously in the
PatronSelfRegistrationAdditionalInstructions preference is
now stored there.
- The HTML customization entry form should offer
PatronSelfRegistrationAdditionalInstructions as a choice under
"Display location."
- Go to Administration -> System preferences and enable
"PatronSelfRegistration." Set "PatronSelfRegistrationVerifyByEmail"
to "Don't require."
- Go to the OPAC and click "Register here."
- Submit a new registration and confirm that the content that was
previously stored in the system preference is shown correctly on the
registration confirmation page.
- Update and reinstall active translations (for instance fr-FR):
- cd misc/translator/
- perl translate update fr-FR
- perl translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the PatronSelfRegistrationAdditionalInstructions HTML
customization and add unique content to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation.
Complete the online registration process again to confirm that the
content you added for your translation shows up correctly on the
confirmation page.
- Go to Administration -> System preferences and confirm that the
PatronSelfRegistrationAdditionalInstructions preference has been
removed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OPACResultsSidebar system preference into HTML
customizations, making it possible to have language- and library-specific
content.
To test you should have some content in the OPACResultsSidebar system
preference before applying the patch. Apply the patch and run the
database update process.
- Go to the OPAC and perform a catalog search.
- Confirm that the content in the sidebar under the search facets,
which was previously in the OPACResultsSidebar system preference, is
still displayed.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OPACResultsSidebar is now stored there.
- The HTML customization entry form should offer OPACResultsSidebar as
a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- cd misc/translator/
- perl translate update fr-FR
- perl translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the OPACResultsSidebar HTML customization and add unique content
to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation. Perform
another catalog search to confirm that the content you added for your
translation shows up correctly.
- Go to Administration -> System preferences and confirm that the
OPACResultsSidebar preference has been removed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OpacMaintenanceNotice system preference into HTML
customizations, making it possible to have language-specific content.
The patch modifies the OPAC maintenance page template so that the
language selection menu can be shown correctly according to the
OpacLangSelectorMode preference.
To test you should have some content in the OpacMaintenanceNotice
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacMaintenanceNotice is now stored there.
- The HTML customization entry form should offer OpacMaintenanceNotice
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Enable the "OpacMaintenance" system preference.
- Edit the OpacMaintenanceNotice HTML customization and add unique
content to the "fr-FR" tab.
- Try to view any page in the OPAC. You should see the content you
added to the OpacMaintenanceNotice HTML customization.
- Switch to your updated translation. The page should redisplay with
your translated content.
- Go to Administration -> System preferences and search for
"OpacMaintenanceNotice." The search should return no
results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the patrons lists, it's only possible to delete on list at a time. This patch add the possibility to select lists and delete them at once.
TEST PLAN
1. Apply the patch.
2. Create at least 2 patron lists (Navigate to Tools > Patron lists > New patron list).
3. Select the lists you want to delete.
4. Click the "Delete selected lists" button.
5. Confirm that the selected lists have been deleted.
6. Ensure that the button cannot be used if no list is selected.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create enough holds on items so that they will appear on the holds ratio report.
2. Visit circ/reserveratios.pl by going to Circulation > Holds ratios
3. No collection column.
4. Apply patch and restart services
5. Look again at circ/reserveratios.pl, now you should see a collection column.
6. Ensure that the data in the column looks correct.
7. Go to Administration > Table settings to ensure you can hide that column, and other columns in the table.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows every library to define the From and Reply-to email addresses for acquisition and serial emails (orders and claims) sent by Koha.
Especially in large libraries with dedicated acquisition departments we need a way that vendors/booksellers can reply directly to the acquisition team and not to the library default email. The library email in the library configuration can then be used for circulation purposes only.
1) Apply patch, run database update
2) Make sure you have set up Koha to send up email (SMTP server, KohaAdminEmailAdress, etc.)
3) Make sure you have a vendor set up with a valid email address.
4) Check that you have four new system preferences:
- AcquisitionsDefaultEMailAddress
- SerialsDefaultEMailAddress
- AcquisitionsDefaultReplyTo
- SerialsDefaultReplyTo
5) Check that there is no change in behaviour if the four new system preferences are left empty:
All acquisition and serial emails are sent from the library email (or KohaAdminEmailAddress if no library email is set)
6) Create an order with at least one order line. Send the order to your vendor by email.
7) Create an acquisition claim notice and send it to your vendor.
8) Create a subscription linked to your vendor and with at least one late issue. Claim the issue.
9) There should be no change in behaviour: emails should be sent from library email (or KohaAdminEmailAddress if nothing is set on library level)
10) Configure different email addresses for system preferences:
- First email address: AcquisitionsDefaultEMailAddress, SerialsDefaultEMailAddress
- Second email address: AcquisitionsDefaultReplyTo, SerialsDefaultReplyTo
11) Repeat steps 6-8
12) Verify that the library specific acquisition and serial email addresses are used as From and Reply-to.
Sponsored-by: Karlsruhe Institute of Technology (KIT)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* to include 'authorised value' in text
* to keep sentences on one line (translation)
* to use sentences instead of just links in some places
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and look at the descriptions of the following system preferences. Make sure each link works and makes sense:
DefaultLongOverdueChargeValue
DefaultLongOverdueLostValue and DefaultLongOverdueDays
DefaultLongOverdueSkipLostStatuses
UpdateItemWhenLostFromHoldList
NewItemsDefaultLocation
UpdateItemLocationOnCheckin
SkipHoldTrapOnNotForLoanValue
UpdateNotForLoanStatusOnCheckin
Reference_NFL_Statuses
ItemsDeniedRenewal
Signed-off-by: Catrina <catrina@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the automatic item modification by age page so that
the rule entry form sorts <select>s alphabetically, making it easier to
find the entry you need.
The [% FOR field IN... %] directives now include the "sort" method, e.g.
[% FOR field IN agefields.sort %]
To test, apply the patch and go to Cataloging -> Item modifications by
age
- Click the "Add rules" button, then the "Add rule" button.
- Check the "Age field," "Conditions," and "Substitutions" dropdowns to
confirm that the choices are listed alphabetically.
- Fill in the form and save the rule.
- Go back and edit the rule you created. Check that the dropdowns are
still correct.
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a enw system preference SCOLoadCheckoutsByDefault
When enabled, a patron's list o fcurrent checkouts will be loaded when the sign in to the SCO
module. If disabled, they will see link to load their checkouts. In either case, a new section
is added to the SCO to show a brief display of the last checked out it
To test:
1 - Enable WebBasedSelfCheck system preference
2 - Browse to:
http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
3 - Sign in the SCO user (or enable AutoSelfCheck)
4 - Sign in as a user with several items checked out
5 - Confirm you see a list of items checked out
6 - Apply patches, updatedatabase, restart_all
7 - 'Finish' and login patron to SCO again
8 - Confirm you still see the list
9 - 'Finish'
10 - Chenge the system preference
11 - Sign in to SCO, confirm checkouts do not load
12 - Confirm you see 'Load your checkouts' link
13 - Check an item out
14 - Confirm you see the last checkout, but not a list
15 - Attempt to checkout an item that cannot be checked out
16 - Confirm "Return to account summary" does not load checkouts
17 - Click "Load your checkouts"
18 - Confirm they load
19 - Check out another item, confrim they remain and are updated
20 - Checkout an item that cannot be issued
21 - Confirm 'Return to account summary' loads the checkouts again
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: AndrewA <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. APPLY PATCH
2. Add a materials specified message to an item. ( 952$3 )
3. Add the following CSS to your IntranetUserCSS:
.mats_spec_label { color: white; background: purple; }
.mats_spec_message { color: white; background: green; }
4. Checkout that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
5. Check in that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes minor updates to the CSS and markup of the vendor
detail page so that the different page sections have the correct
margins.
To test, apply the patch and rebuild the staff interface CSS.
- In Acquisitions, locate a vendor and add at least one contract if
necessary.
- View the vendor details page. Each section (Vendor details, Ordering
information, Contracts) should have comfortable and consistent
margins.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch cleans out the print media css rules that were originally
added for modalprinting. The window.open method is simpler to maintain
and will more reliably print modal content as expected.
We factor out the printer code into it's own JS asset that we can apply
to other printable modals and then use it in the two existing places
where such modals have been defined already (cashup summary and bundle
confirmation).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
