This patch adds a script for sending holds reminder notice to patrons.
We add a 'send_notice' routine to Koha::Patrons - this will either send using the patron's
email prefs, or allow forcing of a single method via the cron
To test:
1 - Create an email hold reminder notice for a single library (Koha module: Holds, code HOLDREMINDER, branch: CPL)
2 - Set some waiting holds today for patrons at CPL, ensure those patrons have 'email' as the transport for hold filled notices
3 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -n -li CPL
4 - You should see the patrons here would have received emails
5 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -li CPL
6 - You should see the emails that were sent
7 - Check the patron notices tab to confirm
8 - Note a ptron with two holds waiting receives only one notice
9 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -li CPL -days 3
10 - No notices are sent
11 - Adjust the waiting date for the holds:
UPDATE reserves SET waitingdate=DATE_SUB(CURDATE(), INTERVAL 3 DAY) WHERE waitingdate = CURDATE();
12 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -li CPL -days 3
13 - Confirm the holds are now reminded
14 - Set yesterday as a holiday for CPL
15 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -n -li CPL -holidays -days 3
16 - Notices should not be sent
17 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -n -li CPL -holidays -days 2
18 - Notices should be sent again
19 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -n -holidays -days 2
20 - Should get feedback that notice was not found for other libraries
21 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -n -holidays -days 2 -mtt sms
22 - Notice is not found
23 - Add the notice for sms
24 - perl misc/cronjobs/holds_reminder.pl -v -lettercode HOLDREMINDER -n -holidays -days 2 -mtt sms
25 - The notice should be sent
26 - Check patrons messaging tab to confirm
27 - prove -v t/db_dependent/Koha/Patrons.t
Sponsored by: The Hotchkiss School (http://www.hotchkiss.org/)
Signed-off-by: Kim Gnerre <kgnerre@hotchkiss.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
'error' has special meaning in exceptions so naming the fields:
type, details
Rather than only dealing with a single exception type, we generically
get the ES exception info and pass it up.
I could not recreate timeout still, however, I simply restarted the
ES docker during commit stage to cause NoNodes exceptions
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This catches a timeout response from the ES server, logs this, and continues the indexing
To test:
1 - perl misc/search_tools/rebuild_elasticsearch.pl
2 - Make the ES server timeout (I don't have good instruction yet)
3 - Watch the job crash
4 - Apply patches
5 - perl misc/search_tools/rebuild_elasticsearch.pl
6 - Make the server timeout
7 - Note the job reports failed commit, and continues
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Bug 26312: (follow-up) Reset buffers even if commit fails
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Bug 26312: (follow-up) Fix whitespace and missing semicolon
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch ensures the script will lock patrons if the pref is set but no other actions
specified
It also changes the variable name to be a bit more explicit
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
See QA remarks.
Test plan:
Run t/db_dependent/Koha/Patrons.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Adding a search on locked patrons to the search_expired in cron script.
This prevents relocking.
Test plan:
Prove Koha/Patrons.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new misc/cronjobs/writeoff_debts.pl script to allow the bulk
waiver of debts from the system. The script accepts some filter parameters,
including the option to pass a line delimited file of accountline_ids, and will
apply a WRITEOFF account against them for the amount of the outstanding debt.
Examples:
./writeoff_debts.pl --added_before $(date -d '-18 month' --iso-8601) --confirm
./writeoff_debts.pl --type COPY --verbose --confirm
./writeoff_debts.pl --file path/to/file --verbose
Test plan
1/ Add some debts to the system for various users.
2/ Output a line delimited report for accountlines for those debts.
3/ Run the script with the --file parameter and confirm those debts were
written off.
4/ Repeat steps 1-3 above but add in a step to partially pay some debts
prior to running the script.
5/ Repeat steps 1-3 above but pay of some of the debts prior to running
the script.
6/ Repeat steps 1-2 above, but instead of passing --file use a
combination of the other parameters to limit your list of debts to
writeoff.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Apply patch
2 - Restart all
3 - Place an item level hold for a patron via the staff client
4 - Cancel the hold using the sip_cli_emulator with hold-mode: -
perl misc/sip_cli_emulator.pl -a localhost -p 6001 -su term1 -sp term1 --patron {cardnumber} --item {BARCODE} -m hold -l CPL --hold-mode -
5 - Run the sip_cli_emulator with no params
6 - Verify help text is understandable
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds "1;" to the end of the following perl files:
Koha/Filter/MARC/EmbedItemsAvailability.pm
Koha/Filter/MARC/EmbedSeeFromHeadings.pm
Koha/Filter/MARC/Null.pm
Koha/Item/Search/Field.pm
Koha/SearchEngine.pm
misc/translator/VerboseWarnings.pm
t/lib/Koha/Plugin/Test.pm
This indicates the succesful execution of the initialization code.
Test plan:
Ensure that there are no other perl files that need "1;", but dont have
it.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This script is used to fix inconsistencies in the items table. Prior to
bug 23463, ModItem dealt with that.
We need to make some attributes as dirty to make sure the
Koha::Item->store method will fix them.
Test plan:
Be familiar with how touch_all_items is supposed to work and confirm
that the different inconsistencies are fixed.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch:
- Updates lanugage to be clearer 'ChargeFinesOnClosedDays' vs 'ChargeFinesOnCloseDay'
- Removes a stary warn
- Add an 'updated' counter and provides feedback in fines.pl
Test plan:
0 - Apply patches, updatedatabase
1 - set finesCalendar to 'ignore', ChargeFinesOnClosedDays to "Don't charge"
2 - Checkout an item due yesterday
3 - Ensure circ rules have a fine amount and interval set
4 - Make today a holiday
5 - perl misc/cronjobs/fines.pl -v
6 - 0 updated
7 - ChargeFinesOnClosedDays to "Charge"
8 - perl misc/cronjobs/fines.pl -v
9 - 1 updated
10 - set fines calendar to 'use'
11 - perl misc/cronjobs/fines.pl -v
12 - 1 updated (NOTE: This is wrong maybe, but handle on another bug)
13 - set ChargeFinesOnClosedDays to "Don't charge"
14 - perl misc/cronjobs/fines.pl -v
12 - 0 updated
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 27180 added a patch to not update fines on holidays if finesCalendar was set to ignore.
At least it's what it advertised, but not what it did.
It seems that we need to add a new pref to control the calculation of
fines on closed days to answer the different use cases.
Test plan:
With this patch applied you can run the fines.pl cronjob and play with
the new pref ChargeFinesOnCloseDay to generate fines on close days.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This reverts commit a26d529a2b.
Revert "Bug 27180: Update fines on holidays"
This reverts commit 80e1b4e66f.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enhances auto_renewals message, removes auto_renewals messaging preference when AutoRenewalNotices is not set to ‘preferences’ and uses that preference to send notices in automatic_renewals.pl script.
To test:
1. Apply patches
2. updatedatabase
3. make sure automatic renewals are allowed in circ rules, have a positive number of allowed renewals and a positive number for renewal period
4. Check AutoRenewalNotices preference
SUCCESS => AutoRenewalNotices has the value ‘cron’ (means that It keeps the usual behaviour)
5. Checkout two items for a patron, and set them as automatic renewal and set due date as your current yesterday
6. perl misc/cronjobs/automatic_renewals.pl -c -v
SUCCESS => items were renewed, but there is no message in message_queue table in mysql
7. Repeat step 5
8. perl misc/cronjobs/automatic_renewals.pl -c -s -v
SUCCESS => items were renewed, and there is one message per item in message_queue table in mysql
9. Change AutoRenewalNotices to ‘never’
10. Repeat step 5
11. perl misc/cronjobs/automatic_renewals.pl -c -s -v
SUCCESS => items were renewed, but there is no message in message_queue table in mysql, even with the -s switch
12. Check any patron’s category, and any detail page in staff or OPAC interface, and in any of them you should find Auto Renewals messaging preference
13. Change AutoRenewalNotices to ‘preferences’
14. Repeat step 12, but this time all of them shows the Auto Renewals messaging preference.
15. Repeat step 5 with a patron that has no messaging preference setted
16. perl misc/cronjobs/automatic_renewals.pl -c -s -v
SUCCESS => items were renewed, but there is no message in message_queue table in mysql, because patron didn’t choose to receive messages
17. Grab a category and modify auto renewals messaging preferences, and save
18. Create a new patron from that category.
SUCCESS => created patron has the same messaging preference for auto renewals
19. Grab that patron and change auto renewals messaging preference to email but not digest
20. Repeat step 5 for that last patron.
21. perl misc/cronjobs/automatic_renewals.pl -c -v
SUCCESS => Items were renewed, and there is a message for each item in message_queue table in mysql.
22. Change auto renewals messaging preference from the same patron and set to email and digest.
23. Repeat step 5.
24. perl misc/cronjobs/automatic_renewals.pl -c -v
SUCCESS => items where renewed, and now there is only one message in message_queue table with the details of both renewed items.
25. Check that any changes to a patron’s auto renewals messaging preference in staff is reflected in OPAC, and the other way arround too.
26. Sign off
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the "Auto renewals" messaging preference on intranet and OPAC, and adds digest feature to misc/cronjobs/automatic_renewals.pl script.
(Deprecated test plan. Please check the last patch)
To test:
1. apply patches
2. perl installer/data/mysql/updatedatabase.pl
3. make sure automatic renewals are allowed in circ rules, have a positive number of allowed renewals and a positive number for renewal period
4. go to patron categories in administration of staff interface and choose a category.
CHECK => in "Default messaging preferences for this patron category" has a "Auto renewals" row and has email and digest options checked
5. grab a patron and go to details page
CHECK => patron's messaging preferences has a "Auto renewals" row with email and digest options checked
6. some settings and save
7. go to opac with that same patron to "your messaging" option
CHECK => patron's messaging preferences has a "Auto renewals" row, and displays changes made in staff interface.
8. uncheck email and digest from "Auto renewals" row and save
9. check out an item for that patron, and set it as automatic renewal and set due date as your current yesterday
10. perl misc/cronjobs/automatic_renewals.pl -c --send-notices -v
SUCCESS => item was renewed, and in message_queue table there is no new message for the patron
11. update patrons messaging preferences and set email option of "Auto renewals" row as checked
12. repeat steps 9 and 10
SUCCESS => item was renewed, but in message_queue table there is a new message of type AUTO_RENEWALS
13. update patrons messaging preferences and set email and digest options of "Auto renewals" row as checked
14. repeat steps 9 and 10
CHECK => item was not renewed
15. run step 10 again, but add -d flag, like this:
perl misc/cronjobs/automatic_renewals.pl -c --send-notices -v -d
SUCCESS => item was renewed, and in message_queue table there is a new message of type AUTO_RENEWALS_DGST
16. Sign off
Signed-off-by: tgoat <tgoatley@gmail.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Marti Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha::Plugins and C4::Context where missing.
Try::Tiny was missing for try/catch.
Test plan :
1) Use a plugin using hook 'cronjob_nightly'
2) Run script : misc/cronjobs/plugins_nightly.pl
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch prevents koha-preferences to set other values than 1/0 to be
used for YesNo prefs
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It seems that we don't really need all this overhead.
YesNo must be a boolean and contain 1 or 0.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
JD Amended patch: Remove perlcritic error
"$d" is declared but not used at line 839, column 5. Unused variables clutter code and make it harder to read. (Severity: 3)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a start time, end time and elapsed times on the 'records
exported' lines to the verbose output of the rebuild_zebra.pl script.
Test plan
1/ Run rebuild_zebra.pl -a -b -v
2/ Note the new timestamps included on the verbose output
3/ Signoff
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove all SQL queries that contain 0000-00-00 and finally
assume we do not longer have such value in our DB (for date type)
We already dealt with such values in previous update DB entries.
The 2 added by this one haven't been replaced already.
The code will now assume that either a valid date exist, or NULL/undef.
Test plan:
QA review is needed and test of the different places where code is
modified.
Not sure about the change from reports/issues_avg_stats.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as Load, but for Dump.
Test plan:
Edit ES mappings, replace withdrawn's label with "withdrawn ✔️❤️ ★"
Export the mappings
perl misc/search_tools/export_elasticsearch_mappings.pl > admin/searchengine/elasticsearch/mappings.yaml
Reset mappings from the UI
=> Notice that the label is correct
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From tht YAML pod:
"""
This module has been released to CPAN as YAML::Old, and soon YAML.pm will be changed to just be a frontend interface module for all the various Perl YAML implementation modules, including YAML::Old.
If you want robust and fast YAML processing using the normal Dump/Load API, please consider switching to YAML::XS. It is by far the best Perl module for YAML at this time. It requires that you have a C compiler, since it is written in C.
"""
See also
https://gitlab.com/koha-community/qa-test-tools/-/merge_requests/35
Test plan:
Try some place where YAML::XS is not used and confirm that it works
correctly
QA note: This patch removes some uses of YAML that were not useful
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows multiple --category_code <categorycode> in delete_patrons.pl
The t/db_dependent/Members.t test has 2 added testcases with multiple category_code.
To test:
1) Run the test: prove -l . -v t/db_dependent/Members.t
2) This requires records in the database with at least two category codes. For example PT and ST.
3) Run the script: delete_patrons.pl --category_code PT
4) Confirm the number of patrons that would have been deleted.
5) Run the script: delete_patrons.pl --category_code PT --category-code ST
6) Confirm the number of patrons that would have been deleted.
7) Sign Off
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature is not used as far as we know and it's not known to work.
It's preferable to remove it.
Test plan:
Make sure the OpacGroupResults pref code is removed, as well as the
PazPar2 files and code.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The check-url.pl script has been deprecated since Koha 3.8 - this patch removes it.
If any users are still referencing that script in their cronjobs they will need to
update to the new script upon upgrade.
To test:
1 - verify the script is gone
2 - verify check-url-quick.pl works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the script misc/import_patrons.pl is run without "--confirm" it reports
that it is "running in dry-run mode" but it is not!
Test Plan:
1) Import a CSV of patrons using import_patrons.pm *without* the --confirm parameter
2) Note that it does actually import the patrons
3) Apply this patch
4) Note that this time the patrons are not actually imported
5) Import again with --confirm
6) Note that the patrons were actually imported this time!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1. Go to Administration
2. Go to System Preferences
3. Find 'delimiter' (note the name)
4. Apply patch
5. Repeat step 1 and 2
6. Find 'CSVDelimiter' (note the name)
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
*** WARNING: empty section in previous paragraph at line 28 in file misc/cronjobs/advance_notices.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the double ups in the perldoc of the above file,
deleting the less clear double ups. The missing "-c" in OPTIONS
appears to have been fixed in an earlier patch (it is there
already).
Task Plan:
1. Run perldoc misc/cronjobs/advance_notices.pl in the terminal. Note
the double ups of NAME, SYNOPSIS, and DESCRIPTION
2. Apply the patch
3. Run the command again. The double ups should be gone, with the more
clear version of each of NAME, SYNOPSIS, and DESCRIPTION remaining.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1. Go to Administration
2. Go to System Preferences
3. Find 'opaclanguages' (note the lack of capitalisation)
4. Apply patch
5. Repeat step 1 and 2
6. Find 'OPACLanguages' (note the use of capitalisation)
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 23290 explicitly disabled entity expansion during XML parsing for security reasons.
However, many XSLTs define the following entity:
<!ENTITY nbsp " " >
They don't use the entity  , but its presence could lead to confusion.
Signed-off-by: Eden Bacani <eden.bacani@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Update script to use Koha::Logger to capture method failures.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This script simply iterates through installed plugins that impliment a
cronjob_nightly method and runs said method.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
