Bug 17731 removed the -x option of rebuild_zebra but koha-rebuild-zebra
still cals the script with this option.
"Warning: You passed -x which is already the default and is now deprecated"
Test plan:
sudo koha-rebuild-zebra -f
should no longer raise the warning
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Check if the instance does not exist (or was not even passed).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As requested by Jonathan on comment 10 on Bugzilla and supported by Tomas,
we should use the dev_install entry in koha-conf as a boolean flag.
Since we already used it as a path, this patch is not too strict about it.
If the entry is not empty and not equal to "0", we will interpret it as
a true value. The path is taken from the intranetdir entry.
Test plan:
[1] Copy debian/scripts/koha-functions.sh to /usr/share/koha/bin
[2] For a dev install:
Remove the dev install line, or toggle its value between empty string,
0 or 1 and each time test stop/start koha-indexer.
Check the path to rebuild_zebra with ps aux|grep indexer.
If you have no entry, an empty entry or a zero, you should see a regular
path.
(Note: You can do something similar with koha-start-sip.)
[3] For a regular install:
Remove the dev install line.
Stop/start koha-indexer or koha-plack, and verify that it still works.
Add a dev_install line with 0, and repeat stop/start.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[AMENDED February 10, 2017]
[1] Added reading /etc/default/koha-common as in the other debian scripts.
We need it for KOHA_HOME.
[2] Add a -d|--dev parameter for dev installs.
[3] No hardcoded PERL5LIB or KOHA_INSTALL_DIR (KOHA_HOME).
They are read from default file or set by adjust_paths_dev_install.
[4] Adjust template paths for dev installs: OPAC_TMPL, INTRANET_TMPL.
[5] Remove references to obsolete themes ccsr and prog.
Test plan:
[1] Regular package install:
Copy koha-translate to /usr/sbin.
Run koha-translate -l to show installed languages.
Run koha-translate -l -a to show available languages.
Add a language: koha-translate -i nl-NL.
Check template folders in regular location (/usr/share/koha/...)
Remove a language: koha-translate -r nl-NL. Check again.
[2] Dev install or kohadevbox:
Copy koha-translate to /usr/sbin.
If needed, add the <dev_install> line to koha-conf.xml.
Run koha-translate -l -d yourinstance to show installed languages.
(Note: You only see the languages installed in this instance.)
Add a language: koha-translate -i nl-NL -d yourinstance.
Check template folders in the clone.
Remove a language: koha-translate -r nl-NL -d yourinstance.
Note: Make sure you have sufficient file permissions for the kohaclone
files and koha-conf.xml. On kohadevbox you might need to run sudo
koha-translate within the the vagrant user context.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Use run_safe_xmlstarlet for plack workers and requests
[2] Simplify adjust_paths. The lazy export statement is actually enough to
replace adjust_paths by one direct call to adjust_paths_dev_install.
Test plan:
[1] Copy koha-functions.sh and koha-plack:
cp [YOUR_PATH]/debian/scripts/koha-functions.sh /usr/share/koha/bin/
cp [YOUR_PATH]/debian/scripts/koha-plack /usr/sbin/
where YOUR_PATH might well be /home/vagrant/kohaclone.
[2] Make sure that you have dev_install in koha-conf.
Stop and start koha-plack. Verify with ps aux|grep plack.
[3] Rename dev_install to nodev_install (in start and end tag).
Now stop/start koha-plack. Verify with ps aux|grep plack.
[4] Change plack_requests to 51 in your koha-conf.
Restart Plack and check that you see 51 in ps aux|grep plack.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In various scripts we use xmlstarlet to extract values from koha-conf.
If we call xmlstarlet on non-existing entries in koha-conf, this may
however result in silently failing scripts (when set -e is in effect).
A function run_safe_xmlstarlet is added for situations where the entry
might not exist. It will not halt execution.
This patch only adjusts koha-functions.sh and modifies the xmlstarlet calls
for dev_install and zebra_loglevels.
Note: The function does not need to check file existence. If the file does
not exist, xmlstarlet warns about it; the function returns empty string,
but does not set an error exit status.
Test plan: See second patch ("koha-plack adjustments").
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It would be nice if we could control the number of workers and max
requests on a per instance basis, rather than the numbers being
hardcoded in the plack startup script.
Test Plan:
1) Build a new package of Koha with this patch applied ; )
2) Verify koha-plack still works
3) Add the following to the config section of your koha-conf.xml:
<plack_max_requests>75</plack_max_requests>
<plack_workers>4</plack_workers>
4) Stop plack
5) Start plack
6) Verify the number of works and max requests worked!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased against master and added a description for the new configuration
entries
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the following changes:
koha-foreach, koha-upgrade-schema (shell scripts):
[1] Read default file
[2] Include helper functions
[3] Add call to adjust_paths_dev_install
[4] Replace hardcoded path by $PERL5LIB
koha-shell (perl script):
[1] Remove hardcoded lib path
[2] Add a sub that reads PERL5LIB from default or koha-conf, just as the
shell scripts do.
koha-plack (shell script), plack.psgi:
[1] Add call to adjust_paths_dev_install
[2] Remove hardcoded lib path
[3] Add installer path to PERL5LIB, remove it from plack.pgsi
koha-sitemap (shell script):
[1] Add call to adjust_paths_dev_install
[2] Remove hardcoded lib path
[3] Add installer path to PERL5LIB
[4] Adjust path for call to sitemap cron job
koha-start-sip (shell script):
[1] Read default file
[2] Include helper functions
[3] Add call to adjust_paths_dev_install
[4] Adjust path to C4/SIP
koha-stop-sip (shell script):
[1] Remove KOHA_CONF and PERL5LIB (not needed to stop the daemon)
[2] Same for paths in daemon client options
NOTE: Script debian/scripts/koha-upgrade-to-3.4 has been left out
intentionally.
Test plan:
[1] Regular install:
Run koha-foreach echo Hi
Run koha-upgrade-schema yourinstance
Run koha-shell yourinstance
If you have plack, run koha-plack --start|--stop yourinstance
Run koha-sitemap --generate yourinstance
Run koha-start-sip yourinstance
Run koha-stop-sip yourinstance
[2] Dev install [yourinstance] with <dev_install> in koha-conf.xml:
Run koha-upgrade-schema yourinstance
Run koha-shell yourinstance
If you have plack: koha-plack --start|--stop yourinstance
Run koha-sitemap --generate yourinstance
Run koha-start-sip yourinstance
Run koha-stop-sip yourinstance
[3] Git grep on koha/lib
You should no longer see occurrences in debian/scripts except:
koha-translate: see report 16749
koha-upgrade-to-3.4: left out intentionally
[4] Git grep on koha/bin
You should only see hits for lines with koha-functions in the
debian scripts except:
koha-upgrade-to-3.4: left out intentionally
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Most scripts tested on Wheezy (although it would not matter much).
Plack script tested on Jessie.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Add a call to the new adjust_paths_dev_install
[2] Differentiate location of rebuild_zebra.pl
[3] Replace a hardcoded path by $PERL5LIB
Test plan:
Adjust a biblio record in package or dev install.
Run koha-rebuild-zebra -b -z for same instance.
Verify that the change has been indexed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Add a call to the new adjust_paths_dev_install
[2] Differentiate location of rebuild_zebra.pl
NOTE: The scripts assume koha-functions.sh to be in /usr/share/koha/bin.
Finding a better location for this shell library may be hard.
Test plan:
Run koha-indexer for a regular package install or a dev install.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This new function checks koha-conf.xml for a given instance and if it
contains a dev_install line, it adjusts PERL5LIB and KOHA_HOME
accordingly. Otherwise it does not touch the values of these
variables as normally read from /etc/default/koha-common.
The function will be used in various debian scripts to allow for more
flexibility with dev installs. And at the same time aiming to make better
use of PERL5LIB and KOHA_HOME.
Test plan:
[1] Add <dev_install>/not/there</dev_install> to your koha-conf.xml.
[2] Run on the command line:
PERL5LIB=test
source [path-to-your-instance]/debian/scripts/koha-functions.sh
echo $PERL5LIB
adjust_paths_dev_install [name-of-your-instance]
echo $PERL5LIB
The last echo should be: /not/there
[3] Remove the <dev_install> line and repeat step 2.
The last echo should be: test
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the temporary upload folder exists, it should be discarded when
removing an instance. If we do not, it may/will create problems when
recreating the same instance.
A function in koha-functions.sh is added to determine the temp directory
instead of hardcoding /tmp.
Test plan:
[1] Copy koha-functions.sh to /usr/share/koha/bin
[2] Run koha-create --create-db newinstancexx
[3] Run mkdir /tmp/koha_newinstancexx_upload (if /tmp is your temp!)
[4] Run debian/scripts/koha-remove newinstancexx
Do not run the regular one, but verify that you use the updated one.
[5] Check that /tmp/koha_newinstancexx_upload is gone.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Karen Jen <karenliang.student@wegc.school.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
koha-create-defaults substitutes the instance name with the placeholder
__KOHASITE__ in the SQL file that it creates. If the instance name is
something common, like "data", this means that way too many substitutions
will be made, and when koha-create uses the SQL file as a template, broken
data can be the result.
The solution in this patch was suggested by drojf on IRC.
To test:
- Create an instance called "data"
- Run "sudo koha-dump-defaults data > test.sql"
- Take a look at test.sql and verify there are way too many occurences
of __KOHASITE__, like "-- Dumping __KOHASITE__ for table `accountlines`"
- Apply the patch
- Copy the resulting koha-create and koha-dump-defaults to somewhere
running off the packages
- Run "sudo koha-dump-defaults data > test.sql" again and verify there
are only 4 occurrences of __KOHASITE__, in places that make sense
- Create an instance with something like:
$ gzip test.sql
$ sudo koha-create --create-db --defaultsql test.sql.gz test17265
- Verify that you have a working Koha install
Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Works as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See the bug description for the details.
Test plan:
Use this script to create a new koha installation, using MariaDB
You should not display
"user koha_kohadev doesn't have enough privilege on database koha_kohadev "
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Confirm that this still works (with MySQL).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes koha-remove stop all instance's services before
attempting to remove the system user,
Before this patch, only zebra was stopped.
To test:
- Run:
$ sudo koha-create --created-db favourite_name
- Run:
$ sudo koha-remove favourite_name
=> FAIL: koha-indexer is still running for user favourite_name-koha
- Run:
$ sudo koha-create --created-db another_name
$ sudo koha-plack --enable another_name
$ sudo koha-plack --start another_name
$ sudo koha-indexer --stop another_name
$ sudo koha-remove another_name
=> FAIL: koha-plack is still running for user another_name-koha
- Apply the patch
- Repeat the previous tests, with new names
=> SUCCESS: Everything works as expected :-D
- Sign off :-D
Signed-off-by: Lucio Moraes <lmoraes@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply patch
2) Create new instance with parameter --zebralang cs
3) Insert some record with basic latin characters and some with "czech" characters (for example: "č" - should be sorted after "c", "š" - should be sorted after "s")
4) Try to search in katalog (staff and opac) and sort by other field then relevance - title or author for instance
5) Records should be sorted correctly by Czech rules
6) Look at code and confirm it is ok
Signed-off-by: radiuscz <radek.siman@centrum.cz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I did not test this patch, but trust in the author and signoffer
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 13799 introduced the api_secret_passphrase on source installs, but missed to do so on packages.
This patch introduces the entry on the template koha-conf-site.xml.in file, and
patches koha-create so it generates a randomized string (64 chars) to put in it.
To test:
- Apply the patch
- Grab the new template file:
$ sudo cp kohaclone/debian/templates/koha-conf-site.xml.in \
/etc/koha
- Create a new instance:
$ kohaclone/debian/scripts/koha-create --create-db blah
=> SUCCESS: The script runs fine, /etc/koha/sites/blah/koha-conf.xml
contains the api_secret_passphrase entry.
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a function to the koha-plack script so it checks for log file
existence and its permissions. This function is called from the start_plack function.
If some of this conditions are not fulfilled, it solves the situation by either
touching and/or changing the permissions accordingly for the instances' plack log files.
To test:
- Run (on kohadevbox):
$ cd kohaclone
$ debian/scripts/koha-plack --start kohadev
$ debian/scripts/koha-plack --stop kohadev
$ ls /var/log/koha/kohadev/plack*
- Verify ownership of the created files (they might belong to the root user)
- Apply the patch
- Run:
$ chown root:root /var/log/koha/kohadev/plack*
$ debian/scripts/koha-plack --start kohadev
$ ls /var/log/koha/kohadev/plack*
=> SUCCESS: Files belong to kohadev-koha:kohadev-koha
- Run:
$ debian/scripts/koha-plack --stop kohadev
$ rm /var/log/koha/kohadev/plack*
$ debian/scripts/koha-plack --start kohadev
$ ls /var/log/koha/kohadev/plack*
=> SUCCESS: Files are created and belong to kohadev-koha:kohadev-koha
- Sign off :-D
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch follows Galen's suggestion in comment #7.
TEST PLAN
---------
1) Back up your koha logs as desired.
2) add something to /var/log/koha/{instance name}/intranet-error.log
3) ps aux | grep zebra
4) logrotate -f /etc/logrotate.d/koha-common
5) ps aux | grep zebra
-- the zebrasrv and daemon process for zebra indexing
didn't restart.
6) apply this patch against /usr/sbin/koha-stop-zebra
7) sudo koha-start-zebra {instance name}
8) ps aux | grep zebra
-- the processes should have started up again.
9) add different junk to /var/log/koha/{instance name}/intranet-error.log
10) ps aux | grep zebra
11) logrotate -f /etc/logrotate.d/koha-common
12) ps aux | grep zebra
-- the process ids for the zebrasrv and daemon processes should
be different, but the number of processes is the same as before.
13) sign off, because its less ugly than comment #3
Sponsored-by: Tulong Aklatan
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected, no regressions found.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch just does that, and removes it from the comment on /etc/default/koha-common
To test:
- Apply the patch
- Run:
$ vagrant ssh ; cd kohaclone
$ sudo debian/scripts/koha-indexer --stop kohadev
$ sudo debian/scripts/koha-indexer --start kohadev
=> SUCCESS: Verify no warning is shown on the indexer-output.log file
- Sign off
https://bugs.koha-community.org/show_bug.cgi?id=16830
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch introduces the koha-sitemap script. This script wraps calls to
the misc/cronjobs/sitemap.pl script so it can be done easily instance-wise.
It sets /var/lib/koha/${instance}/sitemap as the destination directory for
the sitemap files. A followup will make them available through an Apache
configuration entry.
koha-functions.sh is provided with a handy is_sitemap_enabled function so
we can later add filters to other commands (koha-list, koha-foreach, etc).
Exposes sitemap files to apache. This is suitable for including the sitemap in
the robots.txt file as proposed in
http://www.sitemaps.org/protocol.html#submit_robots
Note: it depends on Apache 2.4+ so we can patch the file as needed. Older
Apache users will be warned that they need to tweak the apache files on their
own.
To test:
- You can build a package out of this patchset, or do the following on a kohadevbox
cp debian/scripts/koha-functions.sh /usr/share/koha/bin
- Run
$ debian/scripts/koha-sitemap --help
- Go through all the options (--enable, --disable, generate).
(a) --enable:
- debian/scripts/koha-sitemap --enable kohadev
=> SUCCESS: /var/lib/koha/kohadev/sitemap.enabled is created
- call it again, a suitable warning is raised and the file is still there
(b) debian/scripts/koha-sitemap --disable kohadev
=> SUCCESS: /var/lib/koha/kohadev/sitemap.enabled is deleted
- call it again, a suitable warning is raised and the file does not exist
(c) --generate:
- debian/scripts/koha-sitemap --generate kohadev
=> SUCCESS: sitemapindex.xml and sitemap000X.xml files are generated in
/var/lib/koha/kohadev/sitemap/
- Sign off :-D
Sponsored-by: Orex Digital
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On Debian Jessie, apt needs to be told it should get the dependencies
for the LE package from backports, or it will error. We check if we are
on Jessie and do that automatically so users don't need to set priorities
manually in apt.
Changed to lsb_release -c -s.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Temporarely set +e so the test for the LE package does not break
koha-create
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes koha-remove take care of
/etc/letsencrypt/renewal/$opacdomain.conf
/var/lib/koha/$site/letsencrypt.enabled
It also adds a few helper functions.
To test
- create a koha instance with LE
- observe you got both files mentioned above
- remove that instance
- verify the files are gone
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Deletes the --staging option of the letsencrypt command to get
real certificates. Rate limits apply.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New option koha-create --letsencrypt
- installs the letsencrypt package if needed
- creates <instance>
- generates letsencrypt certificates for <instance>
- sets up a https-only website for <instance>
- redirects http to https for <instance>
! you need to enable jessie backports to install letsencrypt: add
deb http://http.debian.net/debian jessie-backports main contrib non-free
to your /etc/apt/sources.list
! this patch uses the letsencrypt staging server
to create real certificates, apply thy "LE production server" patch
Test plan:
- build a debian package with patch applied
- use apache mod_ssl
sudo a2enmod ssl
- make sure the machine is accessible on 80 (needed for letsencrypt) and 443 from the internet
- install koha with your new package
- Put your (existing) domain options in /etc/koha/koha-sites.conf
- use koha-create with the new options:
sudo koha-create --create-db --letsencrypt <instance>
- if you do not have the letsencrypt package installed, you will be prompted to do that
[
if there is no package available, a symlink to the git checkout will work:
on your test server, get letsencrypt via git
git clone https://github.com/letsencrypt/letsencrypt
create a symlink from /usr/bin/letsencrypt to letsencrypt-auto
sudo ln -s /path/to/letsencrypt/letsencrypt-auto /usr/bin/letsencrypt
]
- wait until setup is finished, check that you got a working OPAC and staff client with certificates
- check that http redirects to https
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the behaviour of the koha-rebuild-zebra script in the following way:
USE_INDEXER_DAEMON=no
- Keeps the current behaviour
USE_INDEXER_DAEMON=yes
- It skips incremental indexing to avoid races.
Caveats:
- A --force option is introduced for useing in a specific situtation that might need it
(i.e. the administrator knows what he's doing).
- If --full is passed, the reindexing is not skipped.
The documentation files and messages are adjusted accordingly.
This patch should help users that want to use the indexing daemon, in which case they wouldn't need
to change their default 5 min cronjob (it will be just skipped). Ultimately, koha-common could have
USE_INDEXER_DAEMON = yes by default, but that's subject for another bug report.
To test:
- Play with the different option switches and USE_INDEXER_DAEMON
- Things work as expected
- Sign off
Regards
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Your Full Name <your_email>
- Run koha-create to create an instance or just fire kohadevbox:ansible
=> FAIL: Notice the instance's koha-conf.xml points to __KOHA_CONF_DIR__
instead of /etc/koha/sites/kohadev/ on the log4perl entry.
=> FAIL: the /etc/koha/sites/kohadev/log4perl.conf contains __LOG_DIR__
instead of /var/log/koha/kohadev/
- Apply this patch and pick the koha-conf-site.xml.in and koha-create files
- Create a new instance
=> SUCCESS: All placeholders are filled correctly.
- Sign off
Regards
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch creates an --exclude definition for the tar command
so it is easier to stack excluded stuff. It does so for the
authority and biblio indexes if --exclude-indexes is passed.
A side effect from this, is that uploads and plugins are still
backed up, as Jonathan noted.
Regards
Edit: Fixed a weird quoting problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch changes the default behaviour of koha-dump to make the inclusion
of Zebra indexes on the dump optional. It does so by introducing a new option
switch that allows to have the previous behaviour in place.
To test:
- Run
$ koha-dump your_instance
- Save a copy of the dump files
- Apply the patch / extract the koha-dump script
- Run the new one:
$ koha-dump your_instance
=> SUCCESS: Verify the contents of the dump are the same
(i.e. it includes /var/lib/koha/your_instance)
- Run with the new switch:
$ koha-dump --exclude-indexes your_instance
=> SUCCESS: The dump does not contain stuff from /var/lib/koha/your_instance
- Go through the rest of the new option switches
-h | --help
-q | --quiet
=> SUCCESS: They work as expected.
- Sign off :-D
Regards
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The file zebra.log is actually not used, because daemon's --output
parameter sends all message to zebra-output (making that stdout
goes there too and --stdout does nothing). We do not need any
differentiation (if any at all) here; behavior does not change.
Note: zebra-error will only contain the daemon's error messages and not
the zebra error messages! So you will probably only find messages about
stopping zebra in zebra-error.
The loglevels are by default none,fatal,warn and can be changed via the
zebra_loglevels config variable (read by koha-functions.sh). If you remove
'none', you will have request-messages in the log. You can also keep 'none'
and add 'request' to achieve something similar (undocumented however).
Some of the parameters passed to daemon when stopping zebra are
superfluous and have been removed.
Test plan:
[1] Remove the file zebra.log. Look at last lines in zebra-error and
zebra-output.
[2] Remove zebra_loglevels from koha-conf (if present).
Start/restart Zebra. Search to verify if Zebra runs.
Stop Zebra and check zebra-error for a new line (killed by signal 15).
[3] Add fatal,warn in koha-conf:zebra_loglevels (do not include 'none').
Start Zebra. Check zebra-output for a line "[log] zebra_start".
Do a search and check zebra-output for lines with "[request]".
[4] Verify that zebra.log did not appear again.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Preparing for including different log levels in koha-start-zebra.
Note that the default response is none,fatal,warn; this is equal
to the options passed to zebrasrv in koha-start-zebra (for now).
Test plan:
[1] Run on the command line: source koha-functions.sh
[2] Type get_loglevels [your_instance]
By default, you should see: none,fatal,warn
[3] Add this line to your koha-conf:
<zebra_loglevels>how,are,you</zebra_loglevels>
[4] Run get_loglevels [your_instance] again.
Remove the nonsense log levels again..
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
1. cd kohaclone/debian/scripts
2. sudo koha-passwd instance | cat
Output should be password only
3. sudo koha-passwd instance
Output should be "Password for $instance is: $password"
Does this get at what you were wanting, Robin?
NOTE:
$ cd ~
$ sudo mkdir /etc/koha
$ sudo mkdir /etc/koha/sites
$ sudo mkdir /etc/koha/sites/library
$ sudo ln -s ~/koha-dev/etc/koha-conf.xml /etc/koha/sites/library/koha-conf.xml
$ sudo mkdir /usr/share/koha
$ sudo ln -s ~/kohaclone/debian/scripts /usr/share/koha/bin
This will fake out your system enough to get koha-passwd to run in your git
system. Since you are using your git system, no need for the sudo's in
steps 2 & 3. And no need to roll a custom build to test it.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
'read anykey' actually requires enter under sh.
This patch changes the string from:
'Press any key to clear the screen...'
to
'Press enter to clear the screen...'
TEST PLAN
---------
1) Apply the first two patches
2) Trigger the script.
2) Press 'q' or anything other than enter when prompted.
--- You could type a whole sentence! Oops!
3) Press enter.
4) Apply this patch
5) Trigger the script.
6) Be happy that you aren't told any key will work.
7) run koha qa tools
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
http://bugs.koha-community.org/show_bug.cgi?id=13141
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
* makes sure output is not on the line with the prompt
* adds ability to clear screen after password display
Same test plan as for original bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
to test...
1/ run without any args, and get some help
# koha-passwd
Displays a Koha instance's password.
Usage: /usr/sbin/koha-passwd instancename1 instancename2...
Missing instance name...
2/ run with a bad instance, get an error
# koha-passwd xxxxx
Unknown instance xxxxx
3/ run with a correct instance, get a password
# koha-passwd koha1
foofoo69
4/ run with many instances, get many passwords
# koha-passwd koha1 koha2 koha3
foofoo69
foofoo68
foofoo67
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Currently, the files in the folder /var/lib/koha/[instance] and also
in /var/spool/koha/[instance] are not removed.
This patch adds the option -p|--purge-all to include those two
directories when removing files.
Note: There was a small bug in the for loop. On the -k line the extra
shift statement is one too much.
NOTE: Verify that you use the adjusted koha-remove in the test plan
and not accidentally an older version of this script.
Test plan:
[1] Create an instance test.
[2] Run koha-remove and verify that /var/lib/koha/test still exists.
[3] Create an instance test2.
[4] Run koha-remove -k -p and verify that the sql database still exists
but the two instance folders in var/lib/koha and var/spool/koha are
gone.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
if you create a koha install using koha-create, and remove it with
koha-remove, the /etc/koha/sites/$SITE/ directory won't be removed,
because the /etc/koha/sites/$SITE/log4perl.conf has not been removed by
this script.
Test plan:
Use this koha-remove script to remove a koha install
Without this patch, the /etc/koha/sites/$SITE directory won't be
removed.
With this patch applied, the directory will be correctly removed.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The --pidfiles options is not provided on starting the daemon and the is_indexer_running consider that the daemon is not running
Test plan:
koha-indexer start
koha-indexer stop
should start and stop the zebra daemon wuthout any error.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tested on kohadevbox:ansible
sudo debian/scripts/koha-indexer --stop kohadev
sudo debian/scripts/koha-indexer --start kohadev
sudo debian/scripts/koha-indexer --restart kohadev
All work as expected on the different scenarios.
This patch does:
[1] Resolve error [koha-create: line 294: local: `=upload21': not a valid
identifier] by replacing $instance by instance.
[2] Resolved typo for 'specify'.
[3] Resolve error: [sed: -e expression #26, char 20: unknown option to `s']
by replacing the slash in the sed line by a #. This makes sed not
stumble over the slashes in the upload path.
[4] Added the aspect of permanent storage in the wording (as opposed to
the storage of temporary uploads in /tmp or similar).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that koha-create now inserts the right path in koha-conf.xml.
Verified that koha-create-dirs created the new uploads directory.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes koha-create and koha-create-dirs aware of the new upload_path
configuration entry.
It defaults to /var/lib/koha/<instance>/uploads as proposed by Robin but lets the
user specify its own directory, using the --upload-path option switch that is
added by this patch.
koha-create-dirs is tweaked so it also creates this new directory.
The docs are updated accordingly.
To test:
- Apply the patch, have a packages setup (either by grabbing the relevant files [1]
or by creating your own package).
- Run koha-create --create-db instance
=> SUCCESS: /var/lib/koha/instance/uploads directory is created
=> SUCCESS: /etc/koha/sites/instance/koha-config.xml has upload_path set correctly
- Create a new instance using the --upload-path making it point to whatever you want
=> SUCCESS: koha-conf.xml points to your chosen path
- Sign off :-D
Regards
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Does not work in its current state. Needs a follow-up.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Not sure this is the best way to fix it but it looks to work.
Test plan:
sudo koha-shell kohadev
should not return any error
Without this patch, you should get
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
Confirm that other options work as before
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected. Tested on kohadevbox:ansible.
KOHA_CONF and PERL5LIB are correctly set on the child shell.
Bonus point: koha-shell doesn't die if the user issues Ctrl+C to abort an execution.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the koha-restart-zebra and koha-stop-zebra scripts
by adding pidfiles folder to the test is_zebra_running.
It also adds pidfiles to the test is_indexer_running so that
koha-rebuild-zebra will work properly.
Test plan:
1) check if zebrasrv is running, get pid of zebrasrv
ps ax | grep zebrasrv
2) In my case, there was also a warning on the about.pl page on a fresh
install: Error message from Zebra: 1011 (bad credentials)
3) try to restart zebra
koha-restart-zebra instancename
You will get a msg :
Zebra does not appear to have been running for instancename
Starting Zebra server for instancename
4) check again if zebrasrv is running
ps ax | grep zebrasrv
and see that pid has not changed, thus it is not restarted
5) Apply patch
6) repeat 4) and watch now how pid has changed
If there was a warning on about.pl it should now be gone
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Good catch Benjamin! It works as expected with the patch.
http://bugs.koha-community.org/show_bug.cgi?id=12372
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
