When "reserve/request.pl -> C4/Reserves.pm::IsAvailableForItemLevelRequest" called many times with hundred of items and "on shelf holds" parameter set to "If all unavailable" for these items + patron, it goes slow.
It happens because in subloop it is checking if all items available so it is O(n^2) and it re-checks each time the same info for each item with repeating DB/data requests.
Fix:
The inner loop 1:1 picked out into separate subroutine and called outside of the loop, saving data in 'items_any_available' variable once, this variable passed to IsAvailableForItemLevelRequest to be used inside as the precalculated result.
This made algorithm O(n) instead of O(n^2) so there is noticeable speed increase.
How to reproduce:
1) on freshly installed kohadevbox create/import one book,
remember that biblionumber for later use it in down below,
2) add 100 items for that book for some library,
3) find some patron, that patron's card number we will
use as a borrower down below to open holds page,
4) check for the rule or set up a single circulation rule
in admin "/cgi-bin/koha/admin/smart-rules.pl",
that rule should match above book items/library/patron,
check that rule to have a non-zero number of holds (total, daily, count) allowed,
and, IMPORTANT: set up "On shelf holds allowed" to "If all unavailable",
("item level holds" doesn't matter).
5) open "Home > Catalog > THAT_BOOK > Place a hold on THAT_BOOK" page
("holds" tab), and enter patron code in the search field,
or you can create a direct link by yourself, for example, in my case it was:
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=23529000686353
6) it should be pretty long page generation time on old code, densely increasing for every hundred items added. In the case of this solution, it's fast, and time increases a little only, linear.
I tested on my computer in VirtualBox for page generation times,
did 3-5 runs for same case to check if results are stable, and got such values:
(old code):
100 items: 50 seconds
200 items: 3.2 minutes
300 items: 7.3 minutes
(version with fix):
100 items: 4.4 seconds
200 items: 7.5 seconds
300 items: 10.4 seconds
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This is just refactoring. extracting logically independent code
to separate sub + tests update. No logic change yet.
Searching for "any_available" item among all biblionumber items was done
inside of "elsif on_shelf_holds == 2", and it is logically very independent
piece of code (this "@items" loop), it needs just biblionumber and patron
as parameters so it can be extracted into separate subroutine, and
later also called/reused from somewhere else.
This ability to call from another place also made for future patch
to remove O(n^2) problem with nested loops.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
`$on_shelf_holds` was assigned before "return .. if" but not used in that code piece,
so sometimes it was useless. Moved assignment after "return .. if".
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Since bug 21206, C4::Reserves::_get_itype is not longer used and should
be removed.
commit 31c29fd31f
Bug 21206: Replace C4::Items::GetItem
UPDATE: In the meanwhile another occurrence was added to Reserves.t, but
easy to replace
Test plan:
% git grep _get_itype
must not return any occurrences.
If one needs it, Koha::Item->effective_itemtype must be used instead.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Place a hold for pickup at a different branch than you are signed in at on an item owned by current branch
2 - Check in the item
3 - Confirm the transfer
4 - Check the branchtransfers table and note the reason is 'Reserve'
5 - Set the preference CanMarkHoldsToPullAsLost to allow
6 - Place a hold on an item at branch you are singed in at
7 - Ensure you are not using strict sql modes (bug 22431)
8 - Go to Circulation->Holds to pull
9 - Mark hold as lost
10 - Check branchtransfers and confirm reason is "LostReserve"
11 - Check in item from step 1 at the correct branch
12 - Go to Circulation->Holds awaiting pickup
13 - Cancel the reserve
14 - Check branchtransfers and confirm reason is "CancelReserve"
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently when fixing priorities of existing holds, priorities aren't
fixed when checking out a middle priority hold because the hold has been
fulfilled and deleted. This patch adds a check for, if the hold can't be
found, an old hold with the required reserve_id.
To test:
1. Place at least four holds on a biblio for different borrowers
2. Check out an item to the 3rd priority borrower
3. Check the existing holds table for the biblio. The priorities might be
out of order, or try clicking the dropdowns and there might be an empty
dropdown option, or open the browser developer tools and notice the option
values in the select are missing value=3.
4. Apply patch and restart memcached
5. Check out an item to the 2nd priority borrower
6. Check the existing holds table for the biblio. Confirm the priorities
have been fixed and are now consecutive with no gaps.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates the emailLibrarianWhenHoldIsPlaced functionality to
use the inbound_email_address method to obtain the correct email address
for a branch.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The number of parameters of AddReserve makes it hard to read and
maintain.
This patch replace it with a hashref, which will make the calls more
readable.
Moreover the bibitems has been removed as it was not used by the
subroutine.
Test plan:
- Make sure the tests pass
- Read the diff and search for typos
- Place a hold on few items
Note for QA: reservation_date and expiration_date do not match the DB column's names,
should we?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch simply adds a test for itemnumber being defined in the
reserve before comparing it to silence the warning.
Test plan:
1) Prior to patch, run prove t/db_dependant/Circulation.t and note lots
of `Use of uninitialized value in numeric eq (==) at
/kohadevbox/koha/C4/Reserves.pm line 790` warnings.
2) Apply the patch, re-run the test and note the tests still pass but
the warnings are now gone.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Without this it is not possible to make for a specific patron category
or itemtype a more specific unlimited holds_per_day rule if you have a
catch all rule (categorycode = *, itemtype = *) with limited
holds_per_day value.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
* CanItemBeReserved
Prior to "Bug 18936: Convert issuingrules fields to circulation_rules",
GetHoldRule returned holds_per_record even if no reservesallowed was
defined. This change restores this behavior.
FIXME Note: In GetHoldRule we return itemtype only if reservesallowed is set,
not sure it is correct.
* t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
When setting returnbranch, holdallowed and hold_fulfillment_policy, we
should not provide categorycode.
* t/db_dependent/Holds.t
Prefer to keep the existing rules instead of removing them. It got quite
hard to understand what was going on here because of the mixup with
the rule reservesallowed that was in issuingrules, and the other rules
we used for the tests. Also, categorycode should not be passed to set
those 3 rules (holdallowed, hold_fulfillment_policy and returnbranch)
* t/db_dependent/Circulation.t
Setting lengthunit to 'hours', no need to make sure the rule has been
correctly be saved
* t/db_dependent/Circulation/CalcDateDue.t
It uses hardcoded data that is not in the sample data (categorycode=C).
Let use K that exists and postpone a refactore of the whole script (to
make it create the data it needs).
* t/db_dependent/Circulation/ReturnClaims.t
* t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t
Simple replace Koha::IssuingRule with Koha::CirculationRules
* t/db_dependent/Koha/Charges/Fees.t
=> FIXME Still failing, stuck here, need help
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This necessitates moving the circ rules from using '*' to using
undef/NULL.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
and remove 'scalar' keyword in calls where it's not needed.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Hans Palsson <hans.palsson@hkr.se>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With bug 24217 pushed, lot of warnings appears during the tests are run.
Most of them are "Use of uninitialized value in "
Test plan:
Take a look at the output of run 1049
https://jenkins.koha-community.org/job/Koha_Master_D9/1049/consoleFull
Most of the warnings from this run will be removed by this patch
At least 2 are not fixed:
Use of uninitialized value in numeric eq (==) at /kohadevbox/koha/C4/Reserves.pm line 791.
t/db_dependent/Items_DelItemCheck.t => see 23463
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds "patron's hold group" as a new option to Hold pickup library match
To test:
1. Set ReservesControlBranch preference to item.
2. Create a hold group
3. Go to circulation and fines rules
SUCCESS => in 'Hold pickup library match' there is a new option called "patron's hold group"
4. In a library not in hold group set 'Hold policy' to "any" and 'Hold pickup library match' to "patron's hold group"
5. Search for a user in the hold group
6. 'Search to hold' for items of the library of step 4
7. Select an item and 'Place hold for [user]'
SUCCESS => in 'Pickup at' you should see patron's hold group as options
8. In OPAC sign in as the same user of step 5
9. Search for the item in step 7
SUCCESS => in 'Pick up locations' you should see patron's hold group as options
10. Sign off
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
* Bug 22284: (follow-up) Remove commented warn and address test failures
* Bug 22284: (follow-up) fix test count after merge
* Bug 22284: (follow-up) fixes after 15496
* Bug 22284: (follow-up) fixes after 18936
* Bug 22284: (follow-up) Remove HomeOrHolding from reserves
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies C4::Reserves to control when hold group options where selected
in smart rules.
In CanItemBeReserved adds 2 new error status messages
1) branchNotInHoldGroup: when a patron's homebranch is not in item's hold group
2) pickupNotInHoldGroup: when a selected pickup location is not in item's hold group
Also CheckReserves is modified when item's priority is defined, to control by hold
group when required.
Finally, IsAvailableForItemLevelRequest was also modified to control by hold group when
required.
To test:
1) Apply this patch
2) prove t/db_dependent/Holds.t
SUCCESS => Result: PASS
3) Sign off
Sponsored-by: VOKAL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We absolutely need that for modules.
We are enabling strict by using Modern::Perl.
Note that other modules from C4 use strict and warnings, instead of
Modern::Perl
Test plan: git grep 2505 **/*.pm should not return any results
And let's see later what needs to be fixed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Checkout an item to a patron
2 - Make sure 'ReservesNeedReturn' is set to 'Automatically'
3 - Place an item level hold on the checked out item
4 - Note the hold is marked waiting
5 - Delete the hold
6 - Apply patch
7 - Place a new hold
8 - Hold is not marked waiting
9 - Please a hold on a different item
10 - Note it is marked waiting
11 - Test when item is damaged and hold not allowed on damaged items
12 - Test when item is in transit
13 - Test when item has another hold
14 - Only in the case where none of the above are true should the hold be marked waiting
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch restores the behavior prior to bug 21206.
If "Hold pickup library match" is "Not set", then
hold_fulfillment_policy equals an empty string.
Test plan:
1. Go to "Circulation and fines rules"
2. Under "Default checkout, hold and return policy", unset "Hold pickup
library match" and Save
3. Place a hold on one item for one patron
4. Try to checkout the same item with another patron
=> Without this patch you the checkout list do not show, and the logs
contain "The method Koha::Item-> is not covered by tests!"
=> With this patch applied you see the checkout list
QA will take care of comparing the statement with the one before bug 21206
and make sure they are equivalent
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates all cases where debit_type_code was 'Res' to
'RESERVE' which is more informative and consistent with the new style
guidelines.
The patch also ensure all calls to add_debit with a type or 'reserve'
now pass the capitalised code instead.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Place some holds
2. Go to the 'Holds' tab of the biblio record
3. Modify dates in the table and click on 'Update holds' button
4. Verify that dates have been correctly updated
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The SIP2 interface has long used a set of accounttypes to denote payment
types. Now we have an authorised list of payment_types and a
payment_type field in accountlines this patch alters the logic to use
it.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
MoveReserve uses CheckReserves to see if the current patron has any holds
on the title they are checking out, however, CheckReserves doesn't return
all holds on a biblio, it returns holds on the item from the holdsqueue
if they exist
This can create a condition where we check holds on an item, find we have it planned for
another borrower, confirm checkout to the current borrower, but don't fill their hold
To test:
1) Find record
2) place record level holds for 2 different patrons (record level)
3) Run holds queue builder, check the queue to confirm an item was selected for patron 1
Circulation->Holds queue->Library="All"
4) Check out the item queued for patron with priority 1 to the second patron
5) You should be asked to confirm, do so
6) Note the item checks out, but both holds remain
7) Apply patch
8) Check in the item
9) Don't confirm the hold
10) Check the holds on the record and the holds queue
11) Patron 1 should be priority 1 with an item selected from the holds queue
12) Checkout to patron 2 as before
13) Note the hold for patron 2 is filled this time
14) Prove -v t/db_dependent/Reserves.t
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
0 - Make sure ExpireReservesMaxPickupDelay is set to 'Don't allow'
1 - Place a hold for a patron
2 - Check in at another library to set it in transit
3 - Update expirationdate of hold to be in the past
UPDATE reserves SET expirationdate='1999-12-31'
4 - Run cancel_expired_holds.pl
5 - Hold is not canceled
6 - Apply patch
7 - Run again
8 - Hold is cancelled
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When the waiting status of a hold is revert we want to preserve the
level hold preference of the user.
Test plan:
Place a hold at biblio level
Confirm the hold
Revert the waiting hold
=> The hold must still be considered as a biblio level hold ("next
available item")
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Almost everywhere we call IsAvailableForItemLevelRequest we already have
a Koha::Patron and Koha::Item object. It makes sense to use them to
avoid a refetch
Test plan:
It would be good to test this patch on top of 19300 and 19301 and make
sure everything works as expected
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Apply all patches except this one
2) Checkout out an item to a patron
3) Check the item in - note that this will fail
4) Apply this patch, and repeat steps 1-3, noting instead that the the
check is instead successful
5) Verify also that reserves act as expected
5) Sign off
Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new syspref "UpdateItemLocationOnCheckin" which
accepts pairs of shelving locations. On check-in the items location is
compared ot the location on the left and, if it matches, is updated to
the location on the left.
This preference replaces ReturnToShelvingCart and
InProcessingToShelvingCart preferences. The update statement should
insert values that replciate these functions. Note existing
functionality of all items in PROC location being returned to
permanent_location is preserved by default. Also, any items issued from
CART location will be returned to their permanent location on issue (if
it differs)
Special values for this pref are:
_ALL_ - used on left side only to affect all items
_BLANK_ - used on either side to match on/set to blank (actual blanks
will work, but this is an easier to read option)
_PERM_ - used on right side only to return items to permanent location
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateitemLocationOnCheckin
to the following (assuming sample data):
NEW: FIC
FIC: GEN
4) Create an item, set its location to NEW
5) Check in the item, note its location is now FIC
6) Check in the item again, note its location is now GEN
7) Check in the item again, note its location remains GEN
8) Test using _ALL_, _BLANK_ and _PERM_ for updates
9) Try entering various incorrect syntax in the pref and note you are warned
Sponsored by:
Arcadia Public Library (http://library.ci.arcadia.ca.us/)
Middletown Township Public Library (http://www.mtpl.org/)
Round Rock Public Library (https://www.roundrocktexas.gov/departments/library/)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Set a default holds plicy for an item type as 'from home library'
2 - Set CircControl to 'logged in library'
3 - Log in as staff from a library without the rule set
4 - Note you can set holds for patrons of any library on items of type
above
5 - Toggle ReservesControlBranch and note that nothing changes
6 - Toggle CircControl and note some combinations don't allow holds
7 - Apply patch
8 - Toggle ReservesControlBranch and note that holdability is affected
9 - Toggle CircControl and note holdability does not change
10 - Read the note on admin/smartrules.pl and confirm it makes sense
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes changes to the way hold fees are recorded and displayed
in the OPAC and staff client:
- No English strings should be stored in the accountline description.
- The accounttype code should be used to display what kind of charge it
is.
To test, apply the patch and go to the staff client:
- Configure a patron category to have a hold fee.
- Place one or more holds for a patron in that category.
- On the patron's record, view Accounting -> Make a payment
- There should be a separate column for "Account type" showing "Hold
fee" for the hold charges.
- There should be no "Res" or "Reserve Charge" text in the
description column--just the title.
- Switch to the "Transactions" tab. The display should be similar.
- In the OPAC, log in as a patron who has hold fees on their account.
- View the "your fines" page to confirm that the information is
displayed correctly there as well.
- Place a hold for a patron who incurs hold charges.
- Log in to the self-checkout module as that patron and check out an
item which will fulfill that hold.
- The correct fine information should be saved to accountlines: A "Res"
type with a description consisting only of the title.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The crux of this issue is that all those holds are unfilled record level holds. The code that checks for the number of holds the user already has *always* uses a branchcode of some form. Because of this, any open record level holds are completely ignored for this purpose.
Test Plan:
1) Set ReservesControlBranch to "item's home library"
2) Set an All libraries/All Patrons/All itemtypes rules limiting a patron to 2 holds
3) Place 3 record level holds, you can but you should not be able to!
4) Delete the holds
5) Apply this patch
6) Attempt to place 3 record level holds
7) Note that you cannot!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the 'interface' field to the accountlines table and
updates all Koha::Object routines and calls to use it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A series of ternaries were introduced when we moved to add_debit which
defaulted to 'user 0' should a userenv not be set. This was incorrect
as userenv may well not be set (during cronscript runs for example) and
the new constraint would not allow such a default. We switch to 'undef'
here to satisfy the constraint.
Test plan
1) Ensure you have data in your system that would be caught by the
longoverdues cronjob.
2) Ensure you're sysprefs are setup to charge for lost items
3) Run the script and varify it runs to completion without errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the mentioned method use the biult-in method for
resuming a suspended hold, instead of manually setting the specific
attributes using the accessors.
The side effect for this is that HoldsLog is now honoured.
This patchset also refactors the tests a bit so they rely on the exposed
methods and thus don't rely on specific implementation details (like
suspended hold means a date in suspended_until plus suspended=1).
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> FAIL: It fails loudly because things are done manually
- Apply this patch
- Run:
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> SUCCESS: Tests pass!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note: This is here for information purpose, feel free to test it if you
wan to play with it.
TODO: C4::Reserves::_get_itype is not longer in use
No more GetItem must be returned by:
git grep GetItem|grep -v GetItemsAvailableToFillHoldRequestsForBib|grep
-v GetItemsForInventory|grep -v GetItemsInfo|grep -v
GetItemsLocationInfo|grep -v GetItemsInCollection|grep -v
GetItemCourseReservesInfo|grep -v GetItemnumbersFromOrder|grep -v
GetItemSearchField|grep -v GetItemTypesCategorized|grep -v
GetItemNumbersFromImportBatch|cut -d':' -f1|sort|uniq
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
