Koha/C4/Members.pm
Kyle M Hall 00c89d915b Bug 9021 - Add SMS via email as an alternative to SMS services via SMS::Send drivers
Nearly all cellular providers allow a person to send an text message to a cellular
phone by sending an email to phonenumber@provider. We can leverage this capability
to add the ability for Koha to send sms messages to patrons without the need to
subscribe to an sms gateway server.

Basic plan:
1. Add a table sms_providers to the db to tell Koha what service providers are available, and what domain emails should be sent to.
2. Add borrowers.sms_provider_id to tell Koha which mobile service the patron subscribes to for the number given in smsalertnumber
3. Modify Koha to send an email rather than using SMS::Send if the driver is set to 'Email'

Test plan:
0) Get a mobile phone
1) Apply the patch
2) Run updatedatabase.pl
3) Set the value of SMSSendDriver to 'Email'
4) Go to the admin page, the "Additional parameters" area should now have the link "SMS cellular providers"
5) On this page, add some providers. Make sure to add the provider for your own cellular phone service.

Here are some examples:
Sprint   phonenumber@messaging.sprintpcs.com
Verizon  phonenumber@vtext.com
T-Mobile phonenumber@tmomail.net
AT&T     phonenumber@txt.att.net

Only add the domain part in the 'domain' field. So for Verizon, that would be 'vtext.com'

6) Create an account for yourself, add your SMS number, and select your provider from the dropdown box directly below it.

7) Enable SMS messaging for Item check-in and Item checkout
8) Check out an item to yourself
9) Run process_message_queue.pl
10) Wait! You should receive a text message shortly, when I tested it, I received my sms message within the minute.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2016-02-14 12:40:04 +00:00

2613 lines
81 KiB
Perl

package C4::Members;
# Copyright 2000-2003 Katipo Communications
# Copyright 2010 BibLibre
# Parts Copyright 2010 Catalyst IT
#
# This file is part of Koha.
#
# Koha is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# Koha is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Koha; if not, see <http://www.gnu.org/licenses>.
use strict;
#use warnings; FIXME - Bug 2505
use C4::Context;
use String::Random qw( random_string );
use Date::Calc qw/Today Add_Delta_YM check_date Date_to_Days/;
use C4::Log; # logaction
use C4::Overdues;
use C4::Reserves;
use C4::Accounts;
use C4::Biblio;
use C4::Letters;
use C4::Members::Attributes qw(SearchIdMatchingAttribute UpdateBorrowerAttribute);
use C4::NewsChannels; #get slip news
use DateTime;
use Koha::Database;
use Koha::DateUtils;
use Koha::Borrower::Debarments qw(IsDebarred);
use Text::Unaccent qw( unac_string );
use Koha::AuthUtils qw(hash_password);
use Koha::Database;
use Module::Load::Conditional qw( can_load );
if ( ! can_load( modules => { 'Koha::NorwegianPatronDB' => undef } ) ) {
warn "Unable to load Koha::NorwegianPatronDB";
}
our ($VERSION,@ISA,@EXPORT,@EXPORT_OK,$debug);
BEGIN {
$VERSION = 3.07.00.049;
$debug = $ENV{DEBUG} || 0;
require Exporter;
@ISA = qw(Exporter);
#Get data
push @EXPORT, qw(
&Search
&GetMemberDetails
&GetMemberRelatives
&GetMember
&GetGuarantees
&GetMemberIssuesAndFines
&GetPendingIssues
&GetAllIssues
&getzipnamecity
&getidcity
&GetFirstValidEmailAddress
&GetNoticeEmailAddress
&GetAge
&GetCities
&GetSortDetails
&GetTitles
&GetPatronImage
&PutPatronImage
&RmPatronImage
&GetHideLostItemsPreference
&IsMemberBlocked
&GetMemberAccountRecords
&GetBorNotifyAcctRecord
&GetborCatFromCatType
&GetBorrowercategory
GetBorrowerCategorycode
&GetBorrowercategoryList
&GetBorrowersToExpunge
&GetBorrowersWhoHaveNeverBorrowed
&GetBorrowersWithIssuesHistoryOlderThan
&GetExpiryDate
&GetUpcomingMembershipExpires
&AddMessage
&DeleteMessage
&GetMessages
&GetMessagesCount
&IssueSlip
GetBorrowersWithEmail
HasOverdues
GetOverduesForPatron
);
#Modify data
push @EXPORT, qw(
&ModMember
&changepassword
);
#Delete data
push @EXPORT, qw(
&DelMember
);
#Insert data
push @EXPORT, qw(
&AddMember
&AddMember_Opac
&MoveMemberToDeleted
&ExtendMemberSubscriptionTo
);
#Check data
push @EXPORT, qw(
&checkuniquemember
&checkuserpassword
&Check_Userid
&Generate_Userid
&fixup_cardnumber
&checkcardnumber
);
}
=head1 NAME
C4::Members - Perl Module containing convenience functions for member handling
=head1 SYNOPSIS
use C4::Members;
=head1 DESCRIPTION
This module contains routines for adding, modifying and deleting members/patrons/borrowers
=head1 FUNCTIONS
=head2 GetMemberDetails
($borrower) = &GetMemberDetails($borrowernumber, $cardnumber);
Looks up a patron and returns information about him or her. If
C<$borrowernumber> is true (nonzero), C<&GetMemberDetails> looks
up the borrower by number; otherwise, it looks up the borrower by card
number.
C<$borrower> is a reference-to-hash whose keys are the fields of the
borrowers table in the Koha database. In addition,
C<$borrower-E<gt>{flags}> is a hash giving more detailed information
about the patron. Its keys act as flags :
if $borrower->{flags}->{LOST} {
# Patron's card was reported lost
}
If the state of a flag means that the patron should not be
allowed to borrow any more books, then it will have a C<noissues> key
with a true value.
See patronflags for more details.
C<$borrower-E<gt>{authflags}> is a hash giving more detailed information
about the top-level permissions flags set for the borrower. For example,
if a user has the "editcatalogue" permission,
C<$borrower-E<gt>{authflags}-E<gt>{editcatalogue}> will exist and have
the value "1".
=cut
sub GetMemberDetails {
my ( $borrowernumber, $cardnumber ) = @_;
my $dbh = C4::Context->dbh;
my $query;
my $sth;
if ($borrowernumber) {
$sth = $dbh->prepare("
SELECT borrowers.*,
category_type,
categories.description,
categories.BlockExpiredPatronOpacActions,
reservefee,
enrolmentperiod
FROM borrowers
LEFT JOIN categories ON borrowers.categorycode=categories.categorycode
WHERE borrowernumber = ?
");
$sth->execute($borrowernumber);
}
elsif ($cardnumber) {
$sth = $dbh->prepare("
SELECT borrowers.*,
category_type,
categories.description,
categories.BlockExpiredPatronOpacActions,
reservefee,
enrolmentperiod
FROM borrowers
LEFT JOIN categories ON borrowers.categorycode = categories.categorycode
WHERE cardnumber = ?
");
$sth->execute($cardnumber);
}
else {
return;
}
my $borrower = $sth->fetchrow_hashref;
return unless $borrower;
my ($amount) = GetMemberAccountRecords($borrower->{borrowernumber});
$borrower->{'amountoutstanding'} = $amount;
# FIXME - patronflags calls GetMemberAccountRecords... just have patronflags return $amount
my $flags = patronflags( $borrower);
my $accessflagshash;
$sth = $dbh->prepare("select bit,flag from userflags");
$sth->execute;
while ( my ( $bit, $flag ) = $sth->fetchrow ) {
if ( $borrower->{'flags'} && $borrower->{'flags'} & 2**$bit ) {
$accessflagshash->{$flag} = 1;
}
}
$borrower->{'flags'} = $flags;
$borrower->{'authflags'} = $accessflagshash;
# Handle setting the true behavior for BlockExpiredPatronOpacActions
$borrower->{'BlockExpiredPatronOpacActions'} =
C4::Context->preference('BlockExpiredPatronOpacActions')
if ( $borrower->{'BlockExpiredPatronOpacActions'} == -1 );
$borrower->{'is_expired'} = 0;
$borrower->{'is_expired'} = 1 if
defined($borrower->{dateexpiry}) &&
$borrower->{'dateexpiry'} ne '0000-00-00' &&
Date_to_Days( Today() ) >
Date_to_Days( split /-/, $borrower->{'dateexpiry'} );
return ($borrower); #, $flags, $accessflagshash);
}
=head2 patronflags
$flags = &patronflags($patron);
This function is not exported.
The following will be set where applicable:
$flags->{CHARGES}->{amount} Amount of debt
$flags->{CHARGES}->{noissues} Set if debt amount >$5.00 (or syspref noissuescharge)
$flags->{CHARGES}->{message} Message -- deprecated
$flags->{CREDITS}->{amount} Amount of credit
$flags->{CREDITS}->{message} Message -- deprecated
$flags->{ GNA } Patron has no valid address
$flags->{ GNA }->{noissues} Set for each GNA
$flags->{ GNA }->{message} "Borrower has no valid address" -- deprecated
$flags->{ LOST } Patron's card reported lost
$flags->{ LOST }->{noissues} Set for each LOST
$flags->{ LOST }->{message} Message -- deprecated
$flags->{DBARRED} Set if patron debarred, no access
$flags->{DBARRED}->{noissues} Set for each DBARRED
$flags->{DBARRED}->{message} Message -- deprecated
$flags->{ NOTES }
$flags->{ NOTES }->{message} The note itself. NOT deprecated
$flags->{ ODUES } Set if patron has overdue books.
$flags->{ ODUES }->{message} "Yes" -- deprecated
$flags->{ ODUES }->{itemlist} ref-to-array: list of overdue books
$flags->{ ODUES }->{itemlisttext} Text list of overdue items -- deprecated
$flags->{WAITING} Set if any of patron's reserves are available
$flags->{WAITING}->{message} Message -- deprecated
$flags->{WAITING}->{itemlist} ref-to-array: list of available items
=over
=item C<$flags-E<gt>{ODUES}-E<gt>{itemlist}> is a reference-to-array listing the
overdue items. Its elements are references-to-hash, each describing an
overdue item. The keys are selected fields from the issues, biblio,
biblioitems, and items tables of the Koha database.
=item C<$flags-E<gt>{ODUES}-E<gt>{itemlisttext}> is a string giving a text listing of
the overdue items, one per line. Deprecated.
=item C<$flags-E<gt>{WAITING}-E<gt>{itemlist}> is a reference-to-array listing the
available items. Each element is a reference-to-hash whose keys are
fields from the reserves table of the Koha database.
=back
All the "message" fields that include language generated in this function are deprecated,
because such strings belong properly in the display layer.
The "message" field that comes from the DB is OK.
=cut
# TODO: use {anonymous => hashes} instead of a dozen %flaginfo
# FIXME rename this function.
sub patronflags {
my %flags;
my ( $patroninformation) = @_;
my $dbh=C4::Context->dbh;
my ($balance, $owing) = GetMemberAccountBalance( $patroninformation->{'borrowernumber'});
if ( $owing > 0 ) {
my %flaginfo;
my $noissuescharge = C4::Context->preference("noissuescharge") || 5;
$flaginfo{'message'} = sprintf 'Patron owes %.02f', $owing;
$flaginfo{'amount'} = sprintf "%.02f", $owing;
if ( $owing > $noissuescharge && !C4::Context->preference("AllowFineOverride") ) {
$flaginfo{'noissues'} = 1;
}
$flags{'CHARGES'} = \%flaginfo;
}
elsif ( $balance < 0 ) {
my %flaginfo;
$flaginfo{'message'} = sprintf 'Patron has credit of %.02f', -$balance;
$flaginfo{'amount'} = sprintf "%.02f", $balance;
$flags{'CREDITS'} = \%flaginfo;
}
if ( $patroninformation->{'gonenoaddress'}
&& $patroninformation->{'gonenoaddress'} == 1 )
{
my %flaginfo;
$flaginfo{'message'} = 'Borrower has no valid address.';
$flaginfo{'noissues'} = 1;
$flags{'GNA'} = \%flaginfo;
}
if ( $patroninformation->{'lost'} && $patroninformation->{'lost'} == 1 ) {
my %flaginfo;
$flaginfo{'message'} = 'Borrower\'s card reported lost.';
$flaginfo{'noissues'} = 1;
$flags{'LOST'} = \%flaginfo;
}
if ( $patroninformation->{'debarred'} && check_date( split( /-/, $patroninformation->{'debarred'} ) ) ) {
if ( Date_to_Days(Date::Calc::Today) < Date_to_Days( split( /-/, $patroninformation->{'debarred'} ) ) ) {
my %flaginfo;
$flaginfo{'debarredcomment'} = $patroninformation->{'debarredcomment'};
$flaginfo{'message'} = $patroninformation->{'debarredcomment'};
$flaginfo{'noissues'} = 1;
$flaginfo{'dateend'} = $patroninformation->{'debarred'};
$flags{'DBARRED'} = \%flaginfo;
}
}
if ( $patroninformation->{'borrowernotes'}
&& $patroninformation->{'borrowernotes'} )
{
my %flaginfo;
$flaginfo{'message'} = $patroninformation->{'borrowernotes'};
$flags{'NOTES'} = \%flaginfo;
}
my ( $odues, $itemsoverdue ) = C4::Overdues::checkoverdues($patroninformation->{'borrowernumber'});
if ( $odues && $odues > 0 ) {
my %flaginfo;
$flaginfo{'message'} = "Yes";
$flaginfo{'itemlist'} = $itemsoverdue;
foreach ( sort { $a->{'date_due'} cmp $b->{'date_due'} }
@$itemsoverdue )
{
$flaginfo{'itemlisttext'} .=
"$_->{'date_due'} $_->{'barcode'} $_->{'title'} \n"; # newline is display layer
}
$flags{'ODUES'} = \%flaginfo;
}
my @itemswaiting = C4::Reserves::GetReservesFromBorrowernumber( $patroninformation->{'borrowernumber'},'W' );
my $nowaiting = scalar @itemswaiting;
if ( $nowaiting > 0 ) {
my %flaginfo;
$flaginfo{'message'} = "Reserved items available";
$flaginfo{'itemlist'} = \@itemswaiting;
$flags{'WAITING'} = \%flaginfo;
}
return ( \%flags );
}
=head2 GetMember
$borrower = &GetMember(%information);
Retrieve the first patron record meeting on criteria listed in the
C<%information> hash, which should contain one or more
pairs of borrowers column names and values, e.g.,
$borrower = GetMember(borrowernumber => id);
C<&GetBorrower> returns a reference-to-hash whose keys are the fields of
the C<borrowers> table in the Koha database.
FIXME: GetMember() is used throughout the code as a lookup
on a unique key such as the borrowernumber, but this meaning is not
enforced in the routine itself.
=cut
#'
sub GetMember {
my ( %information ) = @_;
if (exists $information{borrowernumber} && !defined $information{borrowernumber}) {
#passing mysql's kohaadmin?? Makes no sense as a query
return;
}
my $dbh = C4::Context->dbh;
my $select =
q{SELECT borrowers.*, categories.category_type, categories.description
FROM borrowers
LEFT JOIN categories on borrowers.categorycode=categories.categorycode WHERE };
my $more_p = 0;
my @values = ();
for (keys %information ) {
if ($more_p) {
$select .= ' AND ';
}
else {
$more_p++;
}
if (defined $information{$_}) {
$select .= "$_ = ?";
push @values, $information{$_};
}
else {
$select .= "$_ IS NULL";
}
}
$debug && warn $select, " ",values %information;
my $sth = $dbh->prepare("$select");
$sth->execute(map{$information{$_}} keys %information);
my $data = $sth->fetchall_arrayref({});
#FIXME interface to this routine now allows generation of a result set
#so whole array should be returned but bowhere in the current code expects this
if (@{$data} ) {
return $data->[0];
}
return;
}
=head2 GetMemberRelatives
@borrowernumbers = GetMemberRelatives($borrowernumber);
C<GetMemberRelatives> returns a borrowersnumber's list of guarantor/guarantees of the member given in parameter
=cut
sub GetMemberRelatives {
my $borrowernumber = shift;
my $dbh = C4::Context->dbh;
my @glist;
# Getting guarantor
my $query = "SELECT guarantorid FROM borrowers WHERE borrowernumber=?";
my $sth = $dbh->prepare($query);
$sth->execute($borrowernumber);
my $data = $sth->fetchrow_arrayref();
push @glist, $data->[0] if $data->[0];
my $guarantor = $data->[0] ? $data->[0] : undef;
# Getting guarantees
$query = "SELECT borrowernumber FROM borrowers WHERE guarantorid=?";
$sth = $dbh->prepare($query);
$sth->execute($borrowernumber);
while ($data = $sth->fetchrow_arrayref()) {
push @glist, $data->[0];
}
# Getting sibling guarantees
if ($guarantor) {
$query = "SELECT borrowernumber FROM borrowers WHERE guarantorid=?";
$sth = $dbh->prepare($query);
$sth->execute($guarantor);
while ($data = $sth->fetchrow_arrayref()) {
push @glist, $data->[0] if ($data->[0] != $borrowernumber);
}
}
return @glist;
}
=head2 IsMemberBlocked
my ($block_status, $count) = IsMemberBlocked( $borrowernumber );
Returns whether a patron is restricted or has overdue items that may result
in a block of circulation privileges.
C<$block_status> can have the following values:
1 if the patron is currently restricted, in which case
C<$count> is the expiration date (9999-12-31 for indefinite)
-1 if the patron has overdue items, in which case C<$count> is the number of them
0 if the patron has no overdue items or outstanding fine days, in which case C<$count> is 0
Existing active restrictions are checked before current overdue items.
=cut
sub IsMemberBlocked {
my $borrowernumber = shift;
my $dbh = C4::Context->dbh;
my $blockeddate = Koha::Borrower::Debarments::IsDebarred($borrowernumber);
return ( 1, $blockeddate ) if $blockeddate;
# if he have late issues
my $sth = $dbh->prepare(
"SELECT COUNT(*) as latedocs
FROM issues
WHERE borrowernumber = ?
AND date_due < now()"
);
$sth->execute($borrowernumber);
my $latedocs = $sth->fetchrow_hashref->{'latedocs'};
return ( -1, $latedocs ) if $latedocs > 0;
return ( 0, 0 );
}
=head2 GetMemberIssuesAndFines
($overdue_count, $issue_count, $total_fines) = &GetMemberIssuesAndFines($borrowernumber);
Returns aggregate data about items borrowed by the patron with the
given borrowernumber.
C<&GetMemberIssuesAndFines> returns a three-element array. C<$overdue_count> is the
number of overdue items the patron currently has borrowed. C<$issue_count> is the
number of books the patron currently has borrowed. C<$total_fines> is
the total fine currently due by the borrower.
=cut
#'
sub GetMemberIssuesAndFines {
my ( $borrowernumber ) = @_;
my $dbh = C4::Context->dbh;
my $query = "SELECT COUNT(*) FROM issues WHERE borrowernumber = ?";
$debug and warn $query."\n";
my $sth = $dbh->prepare($query);
$sth->execute($borrowernumber);
my $issue_count = $sth->fetchrow_arrayref->[0];
$sth = $dbh->prepare(
"SELECT COUNT(*) FROM issues
WHERE borrowernumber = ?
AND date_due < now()"
);
$sth->execute($borrowernumber);
my $overdue_count = $sth->fetchrow_arrayref->[0];
$sth = $dbh->prepare("SELECT SUM(amountoutstanding) FROM accountlines WHERE borrowernumber = ?");
$sth->execute($borrowernumber);
my $total_fines = $sth->fetchrow_arrayref->[0];
return ($overdue_count, $issue_count, $total_fines);
}
=head2 columns
my @columns = C4::Member::columns();
Returns an array of borrowers' table columns on success,
and an empty array on failure.
=cut
sub columns {
# Pure ANSI SQL goodness.
my $sql = 'SELECT * FROM borrowers WHERE 1=0;';
# Get the database handle.
my $dbh = C4::Context->dbh;
# Run the SQL statement to load STH's readonly properties.
my $sth = $dbh->prepare($sql);
my $rv = $sth->execute();
# This only fails if the table doesn't exist.
# This will always be called AFTER an install or upgrade,
# so borrowers will exist!
my @data;
if ($sth->{NUM_OF_FIELDS}>0) {
@data = @{$sth->{NAME}};
}
else {
@data = ();
}
return @data;
}
=head2 ModMember
my $success = ModMember(borrowernumber => $borrowernumber,
[ field => value ]... );
Modify borrower's data. All date fields should ALREADY be in ISO format.
return :
true on success, or false on failure
=cut
sub ModMember {
my (%data) = @_;
# test to know if you must update or not the borrower password
if (exists $data{password}) {
if ($data{password} eq '****' or $data{password} eq '') {
delete $data{password};
} else {
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
# Update the hashed PIN in borrower_sync.hashed_pin, before Koha hashes it
Koha::NorwegianPatronDB::NLUpdateHashedPIN( $data{'borrowernumber'}, $data{password} );
}
$data{password} = hash_password($data{password});
}
}
my $old_categorycode = GetBorrowerCategorycode( $data{borrowernumber} );
# get only the columns of a borrower
my $schema = Koha::Database->new()->schema;
my @columns = $schema->source('Borrower')->columns;
my $new_borrower = { map { join(' ', @columns) =~ /$_/ ? ( $_ => $data{$_} ) : () } keys(%data) };
delete $new_borrower->{flags};
$new_borrower->{dateofbirth} ||= undef if exists $new_borrower->{dateofbirth};
$new_borrower->{dateenrolled} ||= undef if exists $new_borrower->{dateenrolled};
$new_borrower->{dateexpiry} ||= undef if exists $new_borrower->{dateexpiry};
$new_borrower->{debarred} ||= undef if exists $new_borrower->{debarred};
$new_borrower->{sms_provider_id} ||= undef if exists $new_borrower->{sms_provider_id};
my $rs = $schema->resultset('Borrower')->search({
borrowernumber => $new_borrower->{borrowernumber},
});
my $execute_success = $rs->update($new_borrower);
if ($execute_success ne '0E0') { # only proceed if the update was a success
# ok if its an adult (type) it may have borrowers that depend on it as a guarantor
# so when we update information for an adult we should check for guarantees and update the relevant part
# of their records, ie addresses and phone numbers
my $borrowercategory= GetBorrowercategory( $data{'category_type'} );
if ( exists $borrowercategory->{'category_type'} && $borrowercategory->{'category_type'} eq ('A' || 'S') ) {
# is adult check guarantees;
UpdateGuarantees(%data);
}
# If the patron changes to a category with enrollment fee, we add a fee
if ( $data{categorycode} and $data{categorycode} ne $old_categorycode ) {
if ( C4::Context->preference('FeeOnChangePatronCategory') ) {
AddEnrolmentFeeIfNeeded( $data{categorycode}, $data{borrowernumber} );
}
}
# If NorwegianPatronDBEnable is enabled, we set syncstatus to something that a
# cronjob will use for syncing with NL
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
my $borrowersync = Koha::Database->new->schema->resultset('BorrowerSync')->find({
'synctype' => 'norwegianpatrondb',
'borrowernumber' => $data{'borrowernumber'}
});
# Do not set to "edited" if syncstatus is "new". We need to sync as new before
# we can sync as changed. And the "new sync" will pick up all changes since
# the patron was created anyway.
if ( $borrowersync->syncstatus ne 'new' && $borrowersync->syncstatus ne 'delete' ) {
$borrowersync->update( { 'syncstatus' => 'edited' } );
}
# Set the value of 'sync'
$borrowersync->update( { 'sync' => $data{'sync'} } );
# Try to do the live sync
Koha::NorwegianPatronDB::NLSync({ 'borrowernumber' => $data{'borrowernumber'} });
}
logaction("MEMBERS", "MODIFY", $data{'borrowernumber'}, "UPDATE (executed w/ arg: $data{'borrowernumber'})") if C4::Context->preference("BorrowersLog");
}
return $execute_success;
}
=head2 AddMember
$borrowernumber = &AddMember(%borrower);
insert new borrower into table
(%borrower keys are database columns. Database columns could be
different in different versions. Please look into database for correct
column names.)
Returns the borrowernumber upon success
Returns as undef upon any db error without further processing
=cut
#'
sub AddMember {
my (%data) = @_;
my $dbh = C4::Context->dbh;
my $schema = Koha::Database->new()->schema;
# generate a proper login if none provided
$data{'userid'} = Generate_Userid( $data{'borrowernumber'}, $data{'firstname'}, $data{'surname'} )
if ( $data{'userid'} eq '' || !Check_Userid( $data{'userid'} ) );
# add expiration date if it isn't already there
unless ( $data{'dateexpiry'} ) {
$data{'dateexpiry'} = GetExpiryDate( $data{'categorycode'}, output_pref( { dt => dt_from_string, dateonly => 1, dateformat => 'iso' } ) );
}
# add enrollment date if it isn't already there
unless ( $data{'dateenrolled'} ) {
$data{'dateenrolled'} = output_pref( { dt => dt_from_string, dateonly => 1, dateformat => 'iso' } );
}
my $patron_category = $schema->resultset('Category')->find( $data{'categorycode'} );
$data{'privacy'} =
$patron_category->default_privacy() eq 'default' ? 1
: $patron_category->default_privacy() eq 'never' ? 2
: $patron_category->default_privacy() eq 'forever' ? 0
: undef;
# Make a copy of the plain text password for later use
my $plain_text_password = $data{'password'};
# create a disabled account if no password provided
$data{'password'} = ($data{'password'})? hash_password($data{'password'}) : '!';
# we don't want invalid dates in the db (mysql has a bad habit of inserting 0000-00-00
$data{'dateofbirth'} = undef if( not $data{'dateofbirth'} );
$data{'debarred'} = undef if ( not $data{'debarred'} );
# get only the columns of Borrower
my @columns = $schema->source('Borrower')->columns;
my $new_member = { map { join(' ',@columns) =~ /$_/ ? ( $_ => $data{$_} ) : () } keys(%data) } ;
delete $new_member->{borrowernumber};
my $rs = $schema->resultset('Borrower');
$data{borrowernumber} = $rs->create($new_member)->id;
# If NorwegianPatronDBEnable is enabled, we set syncstatus to something that a
# cronjob will use for syncing with NL
if ( exists $data{'borrowernumber'} && C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
Koha::Database->new->schema->resultset('BorrowerSync')->create({
'borrowernumber' => $data{'borrowernumber'},
'synctype' => 'norwegianpatrondb',
'sync' => 1,
'syncstatus' => 'new',
'hashed_pin' => Koha::NorwegianPatronDB::NLEncryptPIN( $plain_text_password ),
});
}
# mysql_insertid is probably bad. not necessarily accurate and mysql-specific at best.
logaction("MEMBERS", "CREATE", $data{'borrowernumber'}, "") if C4::Context->preference("BorrowersLog");
AddEnrolmentFeeIfNeeded( $data{categorycode}, $data{borrowernumber} );
return $data{borrowernumber};
}
=head2 Check_Userid
my $uniqueness = Check_Userid($userid,$borrowernumber);
$borrowernumber is optional (i.e. it can contain a blank value). If $userid is passed with a blank $borrowernumber variable, the database will be checked for all instances of that userid (i.e. userid=? AND borrowernumber != '').
If $borrowernumber is provided, the database will be checked for every instance of that userid coupled with a different borrower(number) than the one provided.
return :
0 for not unique (i.e. this $userid already exists)
1 for unique (i.e. this $userid does not exist, or this $userid/$borrowernumber combination already exists)
=cut
sub Check_Userid {
my ( $uid, $borrowernumber ) = @_;
return 0 unless ($uid); # userid is a unique column, we should assume NULL is not unique
return 0 if ( $uid eq C4::Context->config('user') );
my $rs = Koha::Database->new()->schema()->resultset('Borrower');
my $params;
$params->{userid} = $uid;
$params->{borrowernumber} = { '!=' => $borrowernumber } if ($borrowernumber);
my $count = $rs->count( $params );
return $count ? 0 : 1;
}
=head2 Generate_Userid
my $newuid = Generate_Userid($borrowernumber, $firstname, $surname);
Generate a userid using the $surname and the $firstname (if there is a value in $firstname).
$borrowernumber is optional (i.e. it can contain a blank value). A value is passed when generating a new userid for an existing borrower. When a new userid is created for a new borrower, a blank value is passed to this sub.
return :
new userid ($firstname.$surname if there is a $firstname, or $surname if there is no value in $firstname) plus offset (0 if the $newuid is unique, or a higher numeric value if Check_Userid finds an existing match for the $newuid in the database).
=cut
sub Generate_Userid {
my ($borrowernumber, $firstname, $surname) = @_;
my $newuid;
my $offset = 0;
#The script will "do" the following code and increment the $offset until Check_Userid = 1 (i.e. until $newuid comes back as unique)
do {
$firstname =~ s/[[:digit:][:space:][:blank:][:punct:][:cntrl:]]//g;
$surname =~ s/[[:digit:][:space:][:blank:][:punct:][:cntrl:]]//g;
$newuid = lc(($firstname)? "$firstname.$surname" : $surname);
$newuid = unac_string('utf-8',$newuid);
$newuid .= $offset unless $offset == 0;
$offset++;
} while (!Check_Userid($newuid,$borrowernumber));
return $newuid;
}
sub changepassword {
my ( $uid, $member, $digest ) = @_;
my $dbh = C4::Context->dbh;
#Make sure the userid chosen is unique and not theirs if non-empty. If it is not,
#Then we need to tell the user and have them create a new one.
my $resultcode;
my $sth =
$dbh->prepare(
"SELECT * FROM borrowers WHERE userid=? AND borrowernumber != ?");
$sth->execute( $uid, $member );
if ( ( $uid ne '' ) && ( my $row = $sth->fetchrow_hashref ) ) {
$resultcode=0;
}
else {
#Everything is good so we can update the information.
$sth =
$dbh->prepare(
"update borrowers set userid=?, password=? where borrowernumber=?");
$sth->execute( $uid, $digest, $member );
$resultcode=1;
}
logaction("MEMBERS", "CHANGE PASS", $member, "") if C4::Context->preference("BorrowersLog");
return $resultcode;
}
=head2 fixup_cardnumber
Warning: The caller is responsible for locking the members table in write
mode, to avoid database corruption.
=cut
use vars qw( @weightings );
my @weightings = ( 8, 4, 6, 3, 5, 2, 1 );
sub fixup_cardnumber {
my ($cardnumber) = @_;
my $autonumber_members = C4::Context->boolean_preference('autoMemberNum') || 0;
# Find out whether member numbers should be generated
# automatically. Should be either "1" or something else.
# Defaults to "0", which is interpreted as "no".
# if ($cardnumber !~ /\S/ && $autonumber_members) {
($autonumber_members) or return $cardnumber;
my $checkdigit = C4::Context->preference('checkdigit');
my $dbh = C4::Context->dbh;
if ( $checkdigit and $checkdigit eq 'katipo' ) {
# if checkdigit is selected, calculate katipo-style cardnumber.
# otherwise, just use the max()
# purpose: generate checksum'd member numbers.
# We'll assume we just got the max value of digits 2-8 of member #'s
# from the database and our job is to increment that by one,
# determine the 1st and 9th digits and return the full string.
my $sth = $dbh->prepare(
"select max(substring(borrowers.cardnumber,2,7)) as new_num from borrowers"
);
$sth->execute;
my $data = $sth->fetchrow_hashref;
$cardnumber = $data->{new_num};
if ( !$cardnumber ) { # If DB has no values,
$cardnumber = 1000000; # start at 1000000
} else {
$cardnumber += 1;
}
my $sum = 0;
for ( my $i = 0 ; $i < 8 ; $i += 1 ) {
# read weightings, left to right, 1 char at a time
my $temp1 = $weightings[$i];
# sequence left to right, 1 char at a time
my $temp2 = substr( $cardnumber, $i, 1 );
# mult each char 1-7 by its corresponding weighting
$sum += $temp1 * $temp2;
}
my $rem = ( $sum % 11 );
$rem = 'X' if $rem == 10;
return "V$cardnumber$rem";
} else {
my $sth = $dbh->prepare(
'SELECT MAX( CAST( cardnumber AS SIGNED ) ) FROM borrowers WHERE cardnumber REGEXP "^-?[0-9]+$"'
);
$sth->execute;
my ($result) = $sth->fetchrow;
return $result + 1;
}
return $cardnumber; # just here as a fallback/reminder
}
=head2 GetGuarantees
($num_children, $children_arrayref) = &GetGuarantees($parent_borrno);
$child0_cardno = $children_arrayref->[0]{"cardnumber"};
$child0_borrno = $children_arrayref->[0]{"borrowernumber"};
C<&GetGuarantees> takes a borrower number (e.g., that of a patron
with children) and looks up the borrowers who are guaranteed by that
borrower (i.e., the patron's children).
C<&GetGuarantees> returns two values: an integer giving the number of
borrowers guaranteed by C<$parent_borrno>, and a reference to an array
of references to hash, which gives the actual results.
=cut
#'
sub GetGuarantees {
my ($borrowernumber) = @_;
my $dbh = C4::Context->dbh;
my $sth =
$dbh->prepare(
"select cardnumber,borrowernumber, firstname, surname from borrowers where guarantorid=?"
);
$sth->execute($borrowernumber);
my @dat;
my $data = $sth->fetchall_arrayref({});
return ( scalar(@$data), $data );
}
=head2 UpdateGuarantees
&UpdateGuarantees($parent_borrno);
C<&UpdateGuarantees> borrower data for an adult and updates all the guarantees
with the modified information
=cut
#'
sub UpdateGuarantees {
my %data = shift;
my $dbh = C4::Context->dbh;
my ( $count, $guarantees ) = GetGuarantees( $data{'borrowernumber'} );
foreach my $guarantee (@$guarantees){
my $guaquery = qq|UPDATE borrowers
SET address=?,fax=?,B_city=?,mobile=?,city=?,phone=?
WHERE borrowernumber=?
|;
my $sth = $dbh->prepare($guaquery);
$sth->execute($data{'address'},$data{'fax'},$data{'B_city'},$data{'mobile'},$data{'city'},$data{'phone'},$guarantee->{'borrowernumber'});
}
}
=head2 GetPendingIssues
my $issues = &GetPendingIssues(@borrowernumber);
Looks up what the patron with the given borrowernumber has borrowed.
C<&GetPendingIssues> returns a
reference-to-array where each element is a reference-to-hash; the
keys are the fields from the C<issues>, C<biblio>, and C<items> tables.
The keys include C<biblioitems> fields except marc and marcxml.
=cut
#'
sub GetPendingIssues {
my @borrowernumbers = @_;
unless (@borrowernumbers ) { # return a ref_to_array
return \@borrowernumbers; # to not cause surprise to caller
}
# Borrowers part of the query
my $bquery = '';
for (my $i = 0; $i < @borrowernumbers; $i++) {
$bquery .= ' issues.borrowernumber = ?';
if ($i < $#borrowernumbers ) {
$bquery .= ' OR';
}
}
# must avoid biblioitems.* to prevent large marc and marcxml fields from killing performance
# FIXME: namespace collision: each table has "timestamp" fields. Which one is "timestamp" ?
# FIXME: circ/ciculation.pl tries to sort by timestamp!
# FIXME: namespace collision: other collisions possible.
# FIXME: most of this data isn't really being used by callers.
my $query =
"SELECT issues.*,
items.*,
biblio.*,
biblioitems.volume,
biblioitems.number,
biblioitems.itemtype,
biblioitems.isbn,
biblioitems.issn,
biblioitems.publicationyear,
biblioitems.publishercode,
biblioitems.volumedate,
biblioitems.volumedesc,
biblioitems.lccn,
biblioitems.url,
borrowers.firstname,
borrowers.surname,
borrowers.cardnumber,
issues.timestamp AS timestamp,
issues.renewals AS renewals,
issues.borrowernumber AS borrowernumber,
items.renewals AS totalrenewals
FROM issues
LEFT JOIN items ON items.itemnumber = issues.itemnumber
LEFT JOIN biblio ON items.biblionumber = biblio.biblionumber
LEFT JOIN biblioitems ON items.biblioitemnumber = biblioitems.biblioitemnumber
LEFT JOIN borrowers ON issues.borrowernumber = borrowers.borrowernumber
WHERE
$bquery
ORDER BY issues.issuedate"
;
my $sth = C4::Context->dbh->prepare($query);
$sth->execute(@borrowernumbers);
my $data = $sth->fetchall_arrayref({});
my $today = dt_from_string;
foreach (@{$data}) {
if ($_->{issuedate}) {
$_->{issuedate} = dt_from_string($_->{issuedate}, 'sql');
}
$_->{date_due_sql} = $_->{date_due};
# FIXME no need to have this value
$_->{date_due} or next;
$_->{date_due_sql} = $_->{date_due};
# FIXME no need to have this value
$_->{date_due} = dt_from_string($_->{date_due}, 'sql');
if ( DateTime->compare($_->{date_due}, $today) == -1 ) {
$_->{overdue} = 1;
}
}
return $data;
}
=head2 GetAllIssues
$issues = &GetAllIssues($borrowernumber, $sortkey, $limit);
Looks up what the patron with the given borrowernumber has borrowed,
and sorts the results.
C<$sortkey> is the name of a field on which to sort the results. This
should be the name of a field in the C<issues>, C<biblio>,
C<biblioitems>, or C<items> table in the Koha database.
C<$limit> is the maximum number of results to return.
C<&GetAllIssues> an arrayref, C<$issues>, of hashrefs, the keys of which
are the fields from the C<issues>, C<biblio>, C<biblioitems>, and
C<items> tables of the Koha database.
=cut
#'
sub GetAllIssues {
my ( $borrowernumber, $order, $limit ) = @_;
return unless $borrowernumber;
$order = 'date_due desc' unless $order;
my $dbh = C4::Context->dbh;
my $query =
'SELECT *, issues.timestamp as issuestimestamp, issues.renewals AS renewals,items.renewals AS totalrenewals,items.timestamp AS itemstimestamp
FROM issues
LEFT JOIN items on items.itemnumber=issues.itemnumber
LEFT JOIN biblio ON items.biblionumber=biblio.biblionumber
LEFT JOIN biblioitems ON items.biblioitemnumber=biblioitems.biblioitemnumber
WHERE borrowernumber=?
UNION ALL
SELECT *, old_issues.timestamp as issuestimestamp, old_issues.renewals AS renewals,items.renewals AS totalrenewals,items.timestamp AS itemstimestamp
FROM old_issues
LEFT JOIN items on items.itemnumber=old_issues.itemnumber
LEFT JOIN biblio ON items.biblionumber=biblio.biblionumber
LEFT JOIN biblioitems ON items.biblioitemnumber=biblioitems.biblioitemnumber
WHERE borrowernumber=? AND old_issues.itemnumber IS NOT NULL
order by ' . $order;
if ($limit) {
$query .= " limit $limit";
}
my $sth = $dbh->prepare($query);
$sth->execute( $borrowernumber, $borrowernumber );
return $sth->fetchall_arrayref( {} );
}
=head2 GetMemberAccountRecords
($total, $acctlines, $count) = &GetMemberAccountRecords($borrowernumber);
Looks up accounting data for the patron with the given borrowernumber.
C<&GetMemberAccountRecords> returns a three-element array. C<$acctlines> is a
reference-to-array, where each element is a reference-to-hash; the
keys are the fields of the C<accountlines> table in the Koha database.
C<$count> is the number of elements in C<$acctlines>. C<$total> is the
total amount outstanding for all of the account lines.
=cut
sub GetMemberAccountRecords {
my ($borrowernumber) = @_;
my $dbh = C4::Context->dbh;
my @acctlines;
my $numlines = 0;
my $strsth = qq(
SELECT *
FROM accountlines
WHERE borrowernumber=?);
$strsth.=" ORDER BY accountlines_id desc";
my $sth= $dbh->prepare( $strsth );
$sth->execute( $borrowernumber );
my $total = 0;
while ( my $data = $sth->fetchrow_hashref ) {
if ( $data->{itemnumber} ) {
my $biblio = GetBiblioFromItemNumber( $data->{itemnumber} );
$data->{biblionumber} = $biblio->{biblionumber};
$data->{title} = $biblio->{title};
}
$acctlines[$numlines] = $data;
$numlines++;
$total += int(1000 * $data->{'amountoutstanding'}); # convert float to integer to avoid round-off errors
}
$total /= 1000;
return ( $total, \@acctlines,$numlines);
}
=head2 GetMemberAccountBalance
($total_balance, $non_issue_balance, $other_charges) = &GetMemberAccountBalance($borrowernumber);
Calculates amount immediately owing by the patron - non-issue charges.
Based on GetMemberAccountRecords.
Charges exempt from non-issue are:
* Res (reserves)
* Rent (rental) if RentalsInNoissuesCharge syspref is set to false
* Manual invoices if ManInvInNoissuesCharge syspref is set to false
=cut
sub GetMemberAccountBalance {
my ($borrowernumber) = @_;
my $ACCOUNT_TYPE_LENGTH = 5; # this is plain ridiculous...
my @not_fines;
push @not_fines, 'Res' unless C4::Context->preference('HoldsInNoissuesCharge');
push @not_fines, 'Rent' unless C4::Context->preference('RentalsInNoissuesCharge');
unless ( C4::Context->preference('ManInvInNoissuesCharge') ) {
my $dbh = C4::Context->dbh;
my $man_inv_types = $dbh->selectcol_arrayref(qq{SELECT authorised_value FROM authorised_values WHERE category = 'MANUAL_INV'});
push @not_fines, map substr($_, 0, $ACCOUNT_TYPE_LENGTH), @$man_inv_types;
}
my %not_fine = map {$_ => 1} @not_fines;
my ($total, $acctlines) = GetMemberAccountRecords($borrowernumber);
my $other_charges = 0;
foreach (@$acctlines) {
$other_charges += $_->{amountoutstanding} if $not_fine{ substr($_->{accounttype}, 0, $ACCOUNT_TYPE_LENGTH) };
}
return ( $total, $total - $other_charges, $other_charges);
}
=head2 GetBorNotifyAcctRecord
($total, $acctlines, $count) = &GetBorNotifyAcctRecord($params,$notifyid);
Looks up accounting data for the patron with the given borrowernumber per file number.
C<&GetBorNotifyAcctRecord> returns a three-element array. C<$acctlines> is a
reference-to-array, where each element is a reference-to-hash; the
keys are the fields of the C<accountlines> table in the Koha database.
C<$count> is the number of elements in C<$acctlines>. C<$total> is the
total amount outstanding for all of the account lines.
=cut
sub GetBorNotifyAcctRecord {
my ( $borrowernumber, $notifyid ) = @_;
my $dbh = C4::Context->dbh;
my @acctlines;
my $numlines = 0;
my $sth = $dbh->prepare(
"SELECT *
FROM accountlines
WHERE borrowernumber=?
AND notify_id=?
AND amountoutstanding != '0'
ORDER BY notify_id,accounttype
");
$sth->execute( $borrowernumber, $notifyid );
my $total = 0;
while ( my $data = $sth->fetchrow_hashref ) {
if ( $data->{itemnumber} ) {
my $biblio = GetBiblioFromItemNumber( $data->{itemnumber} );
$data->{biblionumber} = $biblio->{biblionumber};
$data->{title} = $biblio->{title};
}
$acctlines[$numlines] = $data;
$numlines++;
$total += int(100 * $data->{'amountoutstanding'});
}
$total /= 100;
return ( $total, \@acctlines, $numlines );
}
=head2 checkuniquemember (OUEST-PROVENCE)
($result,$categorycode) = &checkuniquemember($collectivity,$surname,$firstname,$dateofbirth);
Checks that a member exists or not in the database.
C<&result> is nonzero (=exist) or 0 (=does not exist)
C<&categorycode> is from categorycode table
C<&collectivity> is 1 (= we add a collectivity) or 0 (= we add a physical member)
C<&surname> is the surname
C<&firstname> is the firstname (only if collectivity=0)
C<&dateofbirth> is the date of birth in ISO format (only if collectivity=0)
=cut
# FIXME: This function is not legitimate. Multiple patrons might have the same first/last name and birthdate.
# This is especially true since first name is not even a required field.
sub checkuniquemember {
my ( $collectivity, $surname, $firstname, $dateofbirth ) = @_;
my $dbh = C4::Context->dbh;
my $request = ($collectivity) ?
"SELECT borrowernumber,categorycode FROM borrowers WHERE surname=? " :
($dateofbirth) ?
"SELECT borrowernumber,categorycode FROM borrowers WHERE surname=? and firstname=? and dateofbirth=?" :
"SELECT borrowernumber,categorycode FROM borrowers WHERE surname=? and firstname=?";
my $sth = $dbh->prepare($request);
if ($collectivity) {
$sth->execute( uc($surname) );
} elsif($dateofbirth){
$sth->execute( uc($surname), ucfirst($firstname), $dateofbirth );
}else{
$sth->execute( uc($surname), ucfirst($firstname));
}
my @data = $sth->fetchrow;
( $data[0] ) and return $data[0], $data[1];
return 0;
}
sub checkcardnumber {
my ( $cardnumber, $borrowernumber ) = @_;
# If cardnumber is null, we assume they're allowed.
return 0 unless defined $cardnumber;
my $dbh = C4::Context->dbh;
my $query = "SELECT * FROM borrowers WHERE cardnumber=?";
$query .= " AND borrowernumber <> ?" if ($borrowernumber);
my $sth = $dbh->prepare($query);
$sth->execute(
$cardnumber,
( $borrowernumber ? $borrowernumber : () )
);
return 1 if $sth->fetchrow_hashref;
my ( $min_length, $max_length ) = get_cardnumber_length();
return 2
if length $cardnumber > $max_length
or length $cardnumber < $min_length;
return 0;
}
=head2 get_cardnumber_length
my ($min, $max) = C4::Members::get_cardnumber_length()
Returns the minimum and maximum length for patron cardnumbers as
determined by the CardnumberLength system preference, the
BorrowerMandatoryField system preference, and the width of the
database column.
=cut
sub get_cardnumber_length {
my ( $min, $max ) = ( 0, 16 ); # borrowers.cardnumber is a nullable varchar(16)
$min = 1 if C4::Context->preference('BorrowerMandatoryField') =~ /cardnumber/;
if ( my $cardnumber_length = C4::Context->preference('CardnumberLength') ) {
# Is integer and length match
if ( $cardnumber_length =~ m|^\d+$| ) {
$min = $max = $cardnumber_length
if $cardnumber_length >= $min
and $cardnumber_length <= $max;
}
# Else assuming it is a range
elsif ( $cardnumber_length =~ m|(\d*),(\d*)| ) {
$min = $1 if $1 and $min < $1;
$max = $2 if $2 and $max > $2;
}
}
return ( $min, $max );
}
=head2 getzipnamecity (OUEST-PROVENCE)
take all info from table city for the fields city and zip
check for the name and the zip code of the city selected
=cut
sub getzipnamecity {
my ($cityid) = @_;
my $dbh = C4::Context->dbh;
my $sth =
$dbh->prepare(
"select city_name,city_state,city_zipcode,city_country from cities where cityid=? ");
$sth->execute($cityid);
my @data = $sth->fetchrow;
return $data[0], $data[1], $data[2], $data[3];
}
=head2 getdcity (OUEST-PROVENCE)
recover cityid with city_name condition
=cut
sub getidcity {
my ($city_name) = @_;
my $dbh = C4::Context->dbh;
my $sth = $dbh->prepare("select cityid from cities where city_name=? ");
$sth->execute($city_name);
my $data = $sth->fetchrow;
return $data;
}
=head2 GetFirstValidEmailAddress
$email = GetFirstValidEmailAddress($borrowernumber);
Return the first valid email address for a borrower, given the borrowernumber. For now, the order
is defined as email, emailpro, B_email. Returns the empty string if the borrower has no email
addresses.
=cut
sub GetFirstValidEmailAddress {
my $borrowernumber = shift;
my $dbh = C4::Context->dbh;
my $sth = $dbh->prepare( "SELECT email, emailpro, B_email FROM borrowers where borrowernumber = ? ");
$sth->execute( $borrowernumber );
my $data = $sth->fetchrow_hashref;
if ($data->{'email'}) {
return $data->{'email'};
} elsif ($data->{'emailpro'}) {
return $data->{'emailpro'};
} elsif ($data->{'B_email'}) {
return $data->{'B_email'};
} else {
return '';
}
}
=head2 GetNoticeEmailAddress
$email = GetNoticeEmailAddress($borrowernumber);
Return the email address of borrower used for notices, given the borrowernumber.
Returns the empty string if no email address.
=cut
sub GetNoticeEmailAddress {
my $borrowernumber = shift;
my $which_address = C4::Context->preference("AutoEmailPrimaryAddress");
# if syspref is set to 'first valid' (value == OFF), look up email address
if ( $which_address eq 'OFF' ) {
return GetFirstValidEmailAddress($borrowernumber);
}
# specified email address field
my $dbh = C4::Context->dbh;
my $sth = $dbh->prepare( qq{
SELECT $which_address AS primaryemail
FROM borrowers
WHERE borrowernumber=?
} );
$sth->execute($borrowernumber);
my $data = $sth->fetchrow_hashref;
return $data->{'primaryemail'} || '';
}
=head2 GetExpiryDate
$expirydate = GetExpiryDate($categorycode, $dateenrolled);
Calculate expiry date given a categorycode and starting date. Date argument must be in ISO format.
Return date is also in ISO format.
=cut
sub GetExpiryDate {
my ( $categorycode, $dateenrolled ) = @_;
my $enrolments;
if ($categorycode) {
my $dbh = C4::Context->dbh;
my $sth = $dbh->prepare("SELECT enrolmentperiod,enrolmentperioddate FROM categories WHERE categorycode=?");
$sth->execute($categorycode);
$enrolments = $sth->fetchrow_hashref;
}
# die "GetExpiryDate: for enrollmentperiod $enrolmentperiod (category '$categorycode') starting $dateenrolled.\n";
my @date = split (/-/,$dateenrolled);
if($enrolments->{enrolmentperiod}){
return sprintf("%04d-%02d-%02d", Add_Delta_YM(@date,0,$enrolments->{enrolmentperiod}));
}else{
return $enrolments->{enrolmentperioddate};
}
}
=head2 GetUpcomingMembershipExpires
my $upcoming_mem_expires = GetUpcomingMembershipExpires();
=cut
sub GetUpcomingMembershipExpires {
my $dbh = C4::Context->dbh;
my $days = C4::Context->preference("MembershipExpiryDaysNotice") || 0;
my $dateexpiry = output_pref({ dt => (dt_from_string()->add( days => $days)), dateformat => 'iso', dateonly => 1 });
my $query = "
SELECT borrowers.*, categories.description,
branches.branchname, branches.branchemail FROM borrowers
LEFT JOIN branches on borrowers.branchcode = branches.branchcode
LEFT JOIN categories on borrowers.categorycode = categories.categorycode
WHERE dateexpiry = ?;
";
my $sth = $dbh->prepare($query);
$sth->execute($dateexpiry);
my $results = $sth->fetchall_arrayref({});
return $results;
}
=head2 GetborCatFromCatType
($codes_arrayref, $labels_hashref) = &GetborCatFromCatType();
Looks up the different types of borrowers in the database. Returns two
elements: a reference-to-array, which lists the borrower category
codes, and a reference-to-hash, which maps the borrower category codes
to category descriptions.
=cut
#'
sub GetborCatFromCatType {
my ( $category_type, $action, $no_branch_limit ) = @_;
my $branch_limit = $no_branch_limit
? 0
: C4::Context->userenv ? C4::Context->userenv->{"branch"} : "";
# FIXME - This API seems both limited and dangerous.
my $dbh = C4::Context->dbh;
my $request = qq{
SELECT categories.categorycode, categories.description
FROM categories
};
$request .= qq{
LEFT JOIN categories_branches ON categories.categorycode = categories_branches.categorycode
} if $branch_limit;
if($action) {
$request .= " $action ";
$request .= " AND (branchcode = ? OR branchcode IS NULL) GROUP BY description" if $branch_limit;
} else {
$request .= " WHERE branchcode = ? OR branchcode IS NULL GROUP BY description" if $branch_limit;
}
$request .= " ORDER BY categorycode";
my $sth = $dbh->prepare($request);
$sth->execute(
$action ? $category_type : (),
$branch_limit ? $branch_limit : ()
);
my %labels;
my @codes;
while ( my $data = $sth->fetchrow_hashref ) {
push @codes, $data->{'categorycode'};
$labels{ $data->{'categorycode'} } = $data->{'description'};
}
$sth->finish;
return ( \@codes, \%labels );
}
=head2 GetBorrowercategory
$hashref = &GetBorrowercategory($categorycode);
Given the borrower's category code, the function returns the corresponding
data hashref for a comprehensive information display.
=cut
sub GetBorrowercategory {
my ($catcode) = @_;
my $dbh = C4::Context->dbh;
if ($catcode){
my $sth =
$dbh->prepare(
"SELECT description,dateofbirthrequired,upperagelimit,category_type
FROM categories
WHERE categorycode = ?"
);
$sth->execute($catcode);
my $data =
$sth->fetchrow_hashref;
return $data;
}
return;
} # sub getborrowercategory
=head2 GetBorrowerCategorycode
$categorycode = &GetBorrowerCategoryCode( $borrowernumber );
Given the borrowernumber, the function returns the corresponding categorycode
=cut
sub GetBorrowerCategorycode {
my ( $borrowernumber ) = @_;
my $dbh = C4::Context->dbh;
my $sth = $dbh->prepare( qq{
SELECT categorycode
FROM borrowers
WHERE borrowernumber = ?
} );
$sth->execute( $borrowernumber );
return $sth->fetchrow;
}
=head2 GetBorrowercategoryList
$arrayref_hashref = &GetBorrowercategoryList;
If no category code provided, the function returns all the categories.
=cut
sub GetBorrowercategoryList {
my $no_branch_limit = @_ ? shift : 0;
my $branch_limit = $no_branch_limit
? 0
: C4::Context->userenv ? C4::Context->userenv->{"branch"} : "";
my $dbh = C4::Context->dbh;
my $query = "SELECT categories.* FROM categories";
$query .= qq{
LEFT JOIN categories_branches ON categories.categorycode = categories_branches.categorycode
WHERE branchcode = ? OR branchcode IS NULL GROUP BY description
} if $branch_limit;
$query .= " ORDER BY description";
my $sth = $dbh->prepare( $query );
$sth->execute( $branch_limit ? $branch_limit : () );
my $data = $sth->fetchall_arrayref( {} );
$sth->finish;
return $data;
} # sub getborrowercategory
=head2 GetAge
$dateofbirth,$date = &GetAge($date);
this function return the borrowers age with the value of dateofbirth
=cut
#'
sub GetAge{
my ( $date, $date_ref ) = @_;
if ( not defined $date_ref ) {
$date_ref = sprintf( '%04d-%02d-%02d', Today() );
}
my ( $year1, $month1, $day1 ) = split /-/, $date;
my ( $year2, $month2, $day2 ) = split /-/, $date_ref;
my $age = $year2 - $year1;
if ( $month1 . $day1 > $month2 . $day2 ) {
$age--;
}
return $age;
} # sub get_age
=head2 SetAge
$borrower = C4::Members::SetAge($borrower, $datetimeduration);
$borrower = C4::Members::SetAge($borrower, '0015-12-10');
$borrower = C4::Members::SetAge($borrower, $datetimeduration, $datetime_reference);
eval { $borrower = C4::Members::SetAge($borrower, '015-1-10'); };
if ($@) {print $@;} #Catch a bad ISO Date or kill your script!
This function sets the borrower's dateofbirth to match the given age.
Optionally relative to the given $datetime_reference.
@PARAM1 koha.borrowers-object
@PARAM2 DateTime::Duration-object as the desired age
OR a ISO 8601 Date. (To make the API more pleasant)
@PARAM3 DateTime-object as the relative date, defaults to now().
RETURNS The given borrower reference @PARAM1.
DIES If there was an error with the ISO Date handling.
=cut
#'
sub SetAge{
my ( $borrower, $datetimeduration, $datetime_ref ) = @_;
$datetime_ref = DateTime->now() unless $datetime_ref;
if ($datetimeduration && ref $datetimeduration ne 'DateTime::Duration') {
if ($datetimeduration =~ /^(\d{4})-(\d{2})-(\d{2})/) {
$datetimeduration = DateTime::Duration->new(years => $1, months => $2, days => $3);
}
else {
die "C4::Members::SetAge($borrower, $datetimeduration), datetimeduration not a valid ISO 8601 Date!\n";
}
}
my $new_datetime_ref = $datetime_ref->clone();
$new_datetime_ref->subtract_duration( $datetimeduration );
$borrower->{dateofbirth} = $new_datetime_ref->ymd();
return $borrower;
} # sub SetAge
=head2 GetCities
$cityarrayref = GetCities();
Returns an array_ref of the entries in the cities table
If there are entries in the table an empty row is returned
This is currently only used to populate a popup in memberentry
=cut
sub GetCities {
my $dbh = C4::Context->dbh;
my $city_arr = $dbh->selectall_arrayref(
q|SELECT cityid,city_zipcode,city_name,city_state,city_country FROM cities ORDER BY city_name|,
{ Slice => {} });
if ( @{$city_arr} ) {
unshift @{$city_arr}, {
city_zipcode => q{},
city_name => q{},
cityid => q{},
city_state => q{},
city_country => q{},
};
}
return $city_arr;
}
=head2 GetSortDetails (OUEST-PROVENCE)
($lib) = &GetSortDetails($category,$sortvalue);
Returns the authorized value details
C<&$lib>return value of authorized value details
C<&$sortvalue>this is the value of authorized value
C<&$category>this is the value of authorized value category
=cut
sub GetSortDetails {
my ( $category, $sortvalue ) = @_;
my $dbh = C4::Context->dbh;
my $query = qq|SELECT lib
FROM authorised_values
WHERE category=?
AND authorised_value=? |;
my $sth = $dbh->prepare($query);
$sth->execute( $category, $sortvalue );
my $lib = $sth->fetchrow;
return ($lib) if ($lib);
return ($sortvalue) unless ($lib);
}
=head2 MoveMemberToDeleted
$result = &MoveMemberToDeleted($borrowernumber);
Copy the record from borrowers to deletedborrowers table.
The routine returns 1 for success, undef for failure.
=cut
sub MoveMemberToDeleted {
my ($member) = shift or return;
my $schema = Koha::Database->new()->schema();
my $borrowers_rs = $schema->resultset('Borrower');
$borrowers_rs->result_class('DBIx::Class::ResultClass::HashRefInflator');
my $borrower = $borrowers_rs->find($member);
return unless $borrower;
my $deleted = $schema->resultset('Deletedborrower')->create($borrower);
return $deleted ? 1 : undef;
}
=head2 DelMember
DelMember($borrowernumber);
This function remove directly a borrower whitout writing it on deleteborrower.
+ Deletes reserves for the borrower
=cut
sub DelMember {
my $dbh = C4::Context->dbh;
my $borrowernumber = shift;
#warn "in delmember with $borrowernumber";
return unless $borrowernumber; # borrowernumber is mandatory.
my $query = qq|DELETE
FROM reserves
WHERE borrowernumber=?|;
my $sth = $dbh->prepare($query);
$sth->execute($borrowernumber);
$query = "
DELETE
FROM borrowers
WHERE borrowernumber = ?
";
$sth = $dbh->prepare($query);
$sth->execute($borrowernumber);
logaction("MEMBERS", "DELETE", $borrowernumber, "") if C4::Context->preference("BorrowersLog");
return $sth->rows;
}
=head2 HandleDelBorrower
HandleDelBorrower($borrower);
When a member is deleted (DelMember in Members.pm), you should call me first.
This routine deletes/moves lists and entries for the deleted member/borrower.
Lists owned by the borrower are deleted, but entries from the borrower to
other lists are kept.
=cut
sub HandleDelBorrower {
my ($borrower)= @_;
my $query;
my $dbh = C4::Context->dbh;
#Delete all lists and all shares of this borrower
#Consistent with the approach Koha uses on deleting individual lists
#Note that entries in virtualshelfcontents added by this borrower to
#lists of others will be handled by a table constraint: the borrower
#is set to NULL in those entries.
$query="DELETE FROM virtualshelves WHERE owner=?";
$dbh->do($query,undef,($borrower));
#NOTE:
#We could handle the above deletes via a constraint too.
#But a new BZ report 11889 has been opened to discuss another approach.
#Instead of deleting we could also disown lists (based on a pref).
#In that way we could save shared and public lists.
#The current table constraints support that idea now.
#This pref should then govern the results of other routines/methods such as
#Koha::Virtualshelf->new->delete too.
}
=head2 ExtendMemberSubscriptionTo (OUEST-PROVENCE)
$date = ExtendMemberSubscriptionTo($borrowerid, $date);
Extending the subscription to a given date or to the expiry date calculated on ISO date.
Returns ISO date.
=cut
sub ExtendMemberSubscriptionTo {
my ( $borrowerid,$date) = @_;
my $dbh = C4::Context->dbh;
my $borrower = GetMember('borrowernumber'=>$borrowerid);
unless ($date){
$date = (C4::Context->preference('BorrowerRenewalPeriodBase') eq 'dateexpiry') ?
eval { output_pref( { dt => dt_from_string( $borrower->{'dateexpiry'} ), dateonly => 1, dateformat => 'iso' } ); }
:
output_pref( { dt => dt_from_string, dateonly => 1, dateformat => 'iso' } );
$date = GetExpiryDate( $borrower->{'categorycode'}, $date );
}
my $sth = $dbh->do(<<EOF);
UPDATE borrowers
SET dateexpiry='$date'
WHERE borrowernumber='$borrowerid'
EOF
AddEnrolmentFeeIfNeeded( $borrower->{categorycode}, $borrower->{borrowernumber} );
logaction("MEMBERS", "RENEW", $borrower->{'borrowernumber'}, "Membership renewed")if C4::Context->preference("BorrowersLog");
return $date if ($sth);
return 0;
}
=head2 GetTitles (OUEST-PROVENCE)
($borrowertitle)= &GetTitles();
Looks up the different title . Returns array with all borrowers title
=cut
sub GetTitles {
my @borrowerTitle = split (/,|\|/,C4::Context->preference('BorrowersTitles'));
unshift( @borrowerTitle, "" );
my $count=@borrowerTitle;
if ($count == 1){
return ();
}
else {
return ( \@borrowerTitle);
}
}
=head2 GetPatronImage
my ($imagedata, $dberror) = GetPatronImage($borrowernumber);
Returns the mimetype and binary image data of the image for the patron with the supplied borrowernumber.
=cut
sub GetPatronImage {
my ($borrowernumber) = @_;
warn "Borrowernumber passed to GetPatronImage is $borrowernumber" if $debug;
my $dbh = C4::Context->dbh;
my $query = 'SELECT mimetype, imagefile FROM patronimage WHERE borrowernumber = ?';
my $sth = $dbh->prepare($query);
$sth->execute($borrowernumber);
my $imagedata = $sth->fetchrow_hashref;
warn "Database error!" if $sth->errstr;
return $imagedata, $sth->errstr;
}
=head2 PutPatronImage
PutPatronImage($cardnumber, $mimetype, $imgfile);
Stores patron binary image data and mimetype in database.
NOTE: This function is good for updating images as well as inserting new images in the database.
=cut
sub PutPatronImage {
my ($cardnumber, $mimetype, $imgfile) = @_;
warn "Parameters passed in: Cardnumber=$cardnumber, Mimetype=$mimetype, " . ($imgfile ? "Imagefile" : "No Imagefile") if $debug;
my $dbh = C4::Context->dbh;
my $query = "INSERT INTO patronimage (borrowernumber, mimetype, imagefile) VALUES ( ( SELECT borrowernumber from borrowers WHERE cardnumber = ? ),?,?) ON DUPLICATE KEY UPDATE imagefile = ?;";
my $sth = $dbh->prepare($query);
$sth->execute($cardnumber,$mimetype,$imgfile,$imgfile);
warn "Error returned inserting $cardnumber.$mimetype." if $sth->errstr;
return $sth->errstr;
}
=head2 RmPatronImage
my ($dberror) = RmPatronImage($borrowernumber);
Removes the image for the patron with the supplied borrowernumber.
=cut
sub RmPatronImage {
my ($borrowernumber) = @_;
warn "Borrowernumber passed to GetPatronImage is $borrowernumber" if $debug;
my $dbh = C4::Context->dbh;
my $query = "DELETE FROM patronimage WHERE borrowernumber = ?;";
my $sth = $dbh->prepare($query);
$sth->execute($borrowernumber);
my $dberror = $sth->errstr;
warn "Database error!" if $sth->errstr;
return $dberror;
}
=head2 GetHideLostItemsPreference
$hidelostitemspref = &GetHideLostItemsPreference($borrowernumber);
Returns the HideLostItems preference for the patron category of the supplied borrowernumber
C<&$hidelostitemspref>return value of function, 0 or 1
=cut
sub GetHideLostItemsPreference {
my ($borrowernumber) = @_;
my $dbh = C4::Context->dbh;
my $query = "SELECT hidelostitems FROM borrowers,categories WHERE borrowers.categorycode = categories.categorycode AND borrowernumber = ?";
my $sth = $dbh->prepare($query);
$sth->execute($borrowernumber);
my $hidelostitems = $sth->fetchrow;
return $hidelostitems;
}
=head2 GetBorrowersToExpunge
$borrowers = &GetBorrowersToExpunge(
not_borrowered_since => $not_borrowered_since,
expired_before => $expired_before,
category_code => $category_code,
branchcode => $branchcode
);
This function get all borrowers based on the given criteria.
=cut
sub GetBorrowersToExpunge {
my $params = shift;
my $filterdate = $params->{'not_borrowered_since'};
my $filterexpiry = $params->{'expired_before'};
my $filtercategory = $params->{'category_code'};
my $filterbranch = $params->{'branchcode'} ||
((C4::Context->preference('IndependentBranches')
&& C4::Context->userenv
&& !C4::Context->IsSuperLibrarian()
&& C4::Context->userenv->{branch})
? C4::Context->userenv->{branch}
: "");
my $dbh = C4::Context->dbh;
my $query = q|
SELECT borrowers.borrowernumber,
MAX(old_issues.timestamp) AS latestissue,
MAX(issues.timestamp) AS currentissue
FROM borrowers
JOIN categories USING (categorycode)
LEFT JOIN (
SELECT guarantorid
FROM borrowers
WHERE guarantorid IS NOT NULL
AND guarantorid <> 0
) as tmp ON borrowers.borrowernumber=tmp.guarantorid
LEFT JOIN old_issues USING (borrowernumber)
LEFT JOIN issues USING (borrowernumber)
WHERE category_type <> 'S'
AND tmp.guarantorid IS NULL
|;
my @query_params;
if ( $filterbranch && $filterbranch ne "" ) {
$query.= " AND borrowers.branchcode = ? ";
push( @query_params, $filterbranch );
}
if ( $filterexpiry ) {
$query .= " AND dateexpiry < ? ";
push( @query_params, $filterexpiry );
}
if ( $filtercategory ) {
$query .= " AND categorycode = ? ";
push( @query_params, $filtercategory );
}
$query.=" GROUP BY borrowers.borrowernumber HAVING currentissue IS NULL ";
if ( $filterdate ) {
$query.=" AND ( latestissue < ? OR latestissue IS NULL ) ";
push @query_params,$filterdate;
}
warn $query if $debug;
my $sth = $dbh->prepare($query);
if (scalar(@query_params)>0){
$sth->execute(@query_params);
}
else {
$sth->execute;
}
my @results;
while ( my $data = $sth->fetchrow_hashref ) {
push @results, $data;
}
return \@results;
}
=head2 GetBorrowersWhoHaveNeverBorrowed
$results = &GetBorrowersWhoHaveNeverBorrowed
This function get all borrowers who have never borrowed.
I<$result> is a ref to an array which all elements are a hasref.
=cut
sub GetBorrowersWhoHaveNeverBorrowed {
my $filterbranch = shift ||
((C4::Context->preference('IndependentBranches')
&& C4::Context->userenv
&& !C4::Context->IsSuperLibrarian()
&& C4::Context->userenv->{branch})
? C4::Context->userenv->{branch}
: "");
my $dbh = C4::Context->dbh;
my $query = "
SELECT borrowers.borrowernumber,max(timestamp) as latestissue
FROM borrowers
LEFT JOIN issues ON borrowers.borrowernumber = issues.borrowernumber
WHERE issues.borrowernumber IS NULL
";
my @query_params;
if ($filterbranch && $filterbranch ne ""){
$query.=" AND borrowers.branchcode= ?";
push @query_params,$filterbranch;
}
warn $query if $debug;
my $sth = $dbh->prepare($query);
if (scalar(@query_params)>0){
$sth->execute(@query_params);
}
else {
$sth->execute;
}
my @results;
while ( my $data = $sth->fetchrow_hashref ) {
push @results, $data;
}
return \@results;
}
=head2 GetBorrowersWithIssuesHistoryOlderThan
$results = &GetBorrowersWithIssuesHistoryOlderThan($date)
this function get all borrowers who has an issue history older than I<$date> given on input arg.
I<$result> is a ref to an array which all elements are a hashref.
This hashref is containt the number of time this borrowers has borrowed before I<$date> and the borrowernumber.
=cut
sub GetBorrowersWithIssuesHistoryOlderThan {
my $dbh = C4::Context->dbh;
my $date = shift ||POSIX::strftime("%Y-%m-%d",localtime());
my $filterbranch = shift ||
((C4::Context->preference('IndependentBranches')
&& C4::Context->userenv
&& !C4::Context->IsSuperLibrarian()
&& C4::Context->userenv->{branch})
? C4::Context->userenv->{branch}
: "");
my $query = "
SELECT count(borrowernumber) as n,borrowernumber
FROM old_issues
WHERE returndate < ?
AND borrowernumber IS NOT NULL
";
my @query_params;
push @query_params, $date;
if ($filterbranch){
$query.=" AND branchcode = ?";
push @query_params, $filterbranch;
}
$query.=" GROUP BY borrowernumber ";
warn $query if $debug;
my $sth = $dbh->prepare($query);
$sth->execute(@query_params);
my @results;
while ( my $data = $sth->fetchrow_hashref ) {
push @results, $data;
}
return \@results;
}
=head2 GetBorrowersNamesAndLatestIssue
$results = &GetBorrowersNamesAndLatestIssueList(@borrowernumbers)
this function get borrowers Names and surnames and Issue information.
I<@borrowernumbers> is an array which all elements are borrowernumbers.
This hashref is containt the number of time this borrowers has borrowed before I<$date> and the borrowernumber.
=cut
sub GetBorrowersNamesAndLatestIssue {
my $dbh = C4::Context->dbh;
my @borrowernumbers=@_;
my $query = "
SELECT surname,lastname, phone, email,max(timestamp)
FROM borrowers
LEFT JOIN issues ON borrowers.borrowernumber=issues.borrowernumber
GROUP BY borrowernumber
";
my $sth = $dbh->prepare($query);
$sth->execute;
my $results = $sth->fetchall_arrayref({});
return $results;
}
=head2 ModPrivacy
my $success = ModPrivacy( $borrowernumber, $privacy );
Update the privacy of a patron.
return :
true on success, false on failure
=cut
sub ModPrivacy {
my $borrowernumber = shift;
my $privacy = shift;
return unless defined $borrowernumber;
return unless $borrowernumber =~ /^\d+$/;
return ModMember( borrowernumber => $borrowernumber,
privacy => $privacy );
}
=head2 AddMessage
AddMessage( $borrowernumber, $message_type, $message, $branchcode );
Adds a message to the messages table for the given borrower.
Returns:
True on success
False on failure
=cut
sub AddMessage {
my ( $borrowernumber, $message_type, $message, $branchcode ) = @_;
my $dbh = C4::Context->dbh;
if ( ! ( $borrowernumber && $message_type && $message && $branchcode ) ) {
return;
}
my $query = "INSERT INTO messages ( borrowernumber, branchcode, message_type, message ) VALUES ( ?, ?, ?, ? )";
my $sth = $dbh->prepare($query);
$sth->execute( $borrowernumber, $branchcode, $message_type, $message );
logaction("MEMBERS", "ADDCIRCMESSAGE", $borrowernumber, $message) if C4::Context->preference("BorrowersLog");
return 1;
}
=head2 GetMessages
GetMessages( $borrowernumber, $type );
$type is message type, B for borrower, or L for Librarian.
Empty type returns all messages of any type.
Returns all messages for the given borrowernumber
=cut
sub GetMessages {
my ( $borrowernumber, $type, $branchcode ) = @_;
if ( ! $type ) {
$type = '%';
}
my $dbh = C4::Context->dbh;
my $query = "SELECT
branches.branchname,
messages.*,
message_date,
messages.branchcode LIKE '$branchcode' AS can_delete
FROM messages, branches
WHERE borrowernumber = ?
AND message_type LIKE ?
AND messages.branchcode = branches.branchcode
ORDER BY message_date DESC";
my $sth = $dbh->prepare($query);
$sth->execute( $borrowernumber, $type ) ;
my @results;
while ( my $data = $sth->fetchrow_hashref ) {
$data->{message_date_formatted} = output_pref( { dt => dt_from_string( $data->{message_date} ), dateonly => 1, dateformat => 'iso' } );
push @results, $data;
}
return \@results;
}
=head2 GetMessages
GetMessagesCount( $borrowernumber, $type );
$type is message type, B for borrower, or L for Librarian.
Empty type returns all messages of any type.
Returns the number of messages for the given borrowernumber
=cut
sub GetMessagesCount {
my ( $borrowernumber, $type, $branchcode ) = @_;
if ( ! $type ) {
$type = '%';
}
my $dbh = C4::Context->dbh;
my $query = "SELECT COUNT(*) as MsgCount FROM messages WHERE borrowernumber = ? AND message_type LIKE ?";
my $sth = $dbh->prepare($query);
$sth->execute( $borrowernumber, $type ) ;
my @results;
my $data = $sth->fetchrow_hashref;
my $count = $data->{'MsgCount'};
return $count;
}
=head2 DeleteMessage
DeleteMessage( $message_id );
=cut
sub DeleteMessage {
my ( $message_id ) = @_;
my $dbh = C4::Context->dbh;
my $query = "SELECT * FROM messages WHERE message_id = ?";
my $sth = $dbh->prepare($query);
$sth->execute( $message_id );
my $message = $sth->fetchrow_hashref();
$query = "DELETE FROM messages WHERE message_id = ?";
$sth = $dbh->prepare($query);
$sth->execute( $message_id );
logaction("MEMBERS", "DELCIRCMESSAGE", $message->{'borrowernumber'}, $message->{'message'}) if C4::Context->preference("BorrowersLog");
}
=head2 IssueSlip
IssueSlip($branchcode, $borrowernumber, $quickslip)
Returns letter hash ( see C4::Letters::GetPreparedLetter )
$quickslip is boolean, to indicate whether we want a quick slip
IssueSlip populates ISSUESLIP and ISSUEQSLIP, and will make the following expansions:
Both slips:
<<branches.*>>
<<borrowers.*>>
ISSUESLIP:
<checkedout>
<<biblio.*>>
<<items.*>>
<<biblioitems.*>>
<<issues.*>>
</checkedout>
<overdue>
<<biblio.*>>
<<items.*>>
<<biblioitems.*>>
<<issues.*>>
</overdue>
<news>
<<opac_news.*>>
</news>
ISSUEQSLIP:
<checkedout>
<<biblio.*>>
<<items.*>>
<<biblioitems.*>>
<<issues.*>>
</checkedout>
NOTE: Not all table fields are available, pleasee see GetPendingIssues for a list of available fields.
=cut
sub IssueSlip {
my ($branch, $borrowernumber, $quickslip) = @_;
# FIXME Check callers before removing this statement
#return unless $borrowernumber;
my @issues = @{ GetPendingIssues($borrowernumber) };
for my $issue (@issues) {
$issue->{date_due} = $issue->{date_due_sql};
if ($quickslip) {
my $today = output_pref({ dt => dt_from_string, dateformat => 'iso', dateonly => 1 });
if ( substr( $issue->{issuedate}, 0, 10 ) eq $today
or substr( $issue->{lastreneweddate}, 0, 10 ) eq $today ) {
$issue->{now} = 1;
};
}
}
# Sort on timestamp then on issuedate (useful for tests and could be if modified in a batch
@issues = sort {
my $s = $b->{timestamp} <=> $a->{timestamp};
$s == 0 ?
$b->{issuedate} <=> $a->{issuedate} : $s;
} @issues;
my ($letter_code, %repeat);
if ( $quickslip ) {
$letter_code = 'ISSUEQSLIP';
%repeat = (
'checkedout' => [ map {
'biblio' => $_,
'items' => $_,
'biblioitems' => $_,
'issues' => $_,
}, grep { $_->{'now'} } @issues ],
);
}
else {
$letter_code = 'ISSUESLIP';
%repeat = (
'checkedout' => [ map {
'biblio' => $_,
'items' => $_,
'biblioitems' => $_,
'issues' => $_,
}, grep { !$_->{'overdue'} } @issues ],
'overdue' => [ map {
'biblio' => $_,
'items' => $_,
'biblioitems' => $_,
'issues' => $_,
}, grep { $_->{'overdue'} } @issues ],
'news' => [ map {
$_->{'timestamp'} = $_->{'newdate'};
{ opac_news => $_ }
} @{ GetNewsToDisplay("slip",$branch) } ],
);
}
return C4::Letters::GetPreparedLetter (
module => 'circulation',
letter_code => $letter_code,
branchcode => $branch,
tables => {
'branches' => $branch,
'borrowers' => $borrowernumber,
},
repeat => \%repeat,
);
}
=head2 GetBorrowersWithEmail
([$borrnum,$userid], ...) = GetBorrowersWithEmail('me@example.com');
This gets a list of users and their basic details from their email address.
As it's possible for multiple user to have the same email address, it provides
you with all of them. If there is no userid for the user, there will be an
C<undef> there. An empty list will be returned if there are no matches.
=cut
sub GetBorrowersWithEmail {
my $email = shift;
my $dbh = C4::Context->dbh;
my $query = "SELECT borrowernumber, userid FROM borrowers WHERE email=?";
my $sth=$dbh->prepare($query);
$sth->execute($email);
my @result = ();
while (my $ref = $sth->fetch) {
push @result, $ref;
}
die "Failure searching for borrowers by email address: $sth->errstr" if $sth->err;
return @result;
}
=head2 AddMember_Opac
=cut
sub AddMember_Opac {
my ( %borrower ) = @_;
$borrower{'categorycode'} = C4::Context->preference('PatronSelfRegistrationDefaultCategory');
my $sr = new String::Random;
$sr->{'A'} = [ 'A'..'Z', 'a'..'z' ];
my $password = $sr->randpattern("AAAAAAAAAA");
$borrower{'password'} = $password;
$borrower{'cardnumber'} = fixup_cardnumber();
my $borrowernumber = AddMember(%borrower);
return ( $borrowernumber, $password );
}
=head2 AddEnrolmentFeeIfNeeded
AddEnrolmentFeeIfNeeded( $borrower->{categorycode}, $borrower->{borrowernumber} );
Add enrolment fee for a patron if needed.
=cut
sub AddEnrolmentFeeIfNeeded {
my ( $categorycode, $borrowernumber ) = @_;
# check for enrollment fee & add it if needed
my $dbh = C4::Context->dbh;
my $sth = $dbh->prepare(q{
SELECT enrolmentfee
FROM categories
WHERE categorycode=?
});
$sth->execute( $categorycode );
if ( $sth->err ) {
warn sprintf('Database returned the following error: %s', $sth->errstr);
return;
}
my ($enrolmentfee) = $sth->fetchrow;
if ($enrolmentfee && $enrolmentfee > 0) {
# insert fee in patron debts
C4::Accounts::manualinvoice( $borrowernumber, '', '', 'A', $enrolmentfee );
}
}
=head2 HasOverdues
=cut
sub HasOverdues {
my ( $borrowernumber ) = @_;
my $sql = "SELECT COUNT(*) FROM issues WHERE date_due < NOW() AND borrowernumber = ?";
my $sth = C4::Context->dbh->prepare( $sql );
$sth->execute( $borrowernumber );
my ( $count ) = $sth->fetchrow_array();
return $count;
}
=head2 DeleteExpiredOpacRegistrations
Delete accounts that haven't been upgraded from the 'temporary' category
Returns the number of removed patrons
=cut
sub DeleteExpiredOpacRegistrations {
my $delay = C4::Context->preference('PatronSelfRegistrationExpireTemporaryAccountsDelay');
my $category_code = C4::Context->preference('PatronSelfRegistrationDefaultCategory');
return 0 if not $category_code or not defined $delay or $delay eq q||;
my $query = qq|
SELECT borrowernumber
FROM borrowers
WHERE categorycode = ? AND DATEDIFF( NOW(), dateenrolled ) > ? |;
my $dbh = C4::Context->dbh;
my $sth = $dbh->prepare($query);
$sth->execute( $category_code, $delay );
my $cnt=0;
while ( my ($borrowernumber) = $sth->fetchrow_array() ) {
DelMember($borrowernumber);
$cnt++;
}
return $cnt;
}
=head2 DeleteUnverifiedOpacRegistrations
Delete all unverified self registrations in borrower_modifications,
older than the specified number of days.
=cut
sub DeleteUnverifiedOpacRegistrations {
my ( $days ) = @_;
my $dbh = C4::Context->dbh;
my $sql=qq|
DELETE FROM borrower_modifications
WHERE borrowernumber = 0 AND DATEDIFF( NOW(), timestamp ) > ?|;
my $cnt=$dbh->do($sql, undef, ($days) );
return $cnt eq '0E0'? 0: $cnt;
}
sub GetOverduesForPatron {
my ( $borrowernumber ) = @_;
my $sql = "
SELECT *
FROM issues, items, biblio, biblioitems
WHERE items.itemnumber=issues.itemnumber
AND biblio.biblionumber = items.biblionumber
AND biblio.biblionumber = biblioitems.biblionumber
AND issues.borrowernumber = ?
AND date_due < NOW()
";
my $sth = C4::Context->dbh->prepare( $sql );
$sth->execute( $borrowernumber );
return $sth->fetchall_arrayref({});
}
END { } # module clean-up code here (global destructor)
1;
__END__
=head1 AUTHOR
Koha Team
=cut