Koha/rewrite-config.PL
Galen Charlton 70dccacee5 FRBR: configure PazPar2 during installation
Also added koha-pazpar2-ctl.sh to start and stop
PazPar2.

Signed-off-by: Joshua Ferraro <jmf@liblime.com>
2008-02-11 16:35:18 -06:00

167 lines
5.2 KiB
Perl

# Copyright 2007 MJ Ray
#
# This file is part of Koha.
#
# Koha is free software; you can redistribute it and/or modify it under the
# terms of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
#
# Koha is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along with
# Koha; if not, write to the Free Software Foundation, Inc., 59 Temple Place,
# Suite 330, Boston, MA 02111-1307 USA
#
# Current maintainer MJR http://mjr.towers.org.uk/
# See http://www.koha.org/wiki/?page=KohaInstaller
#
# 2007/11/12 Added DB_PORT and changed other keywords to reflect multi-dbms support. -fbcit
use Sys::Hostname;
use Socket;
=head1 NAME
rewrite-config.PL - helper for the Koha packager and installer
=head1 SYNOPSIS
perl rewrite-config.PL configurationfile
=head1 DESCRIPTION
This helper script replaces keywords in the
configuration files with value either supplied through
the environment (with export, or by putting them on
the start of the make command line) or with reasonable
guesses worked out by the script.
=head2 KEYWORDS
The following configuration keywords are available:
PREFIX,
BASE_DIR, CGI_DIR, LOG_DIR, INSTALL_BASE,
DB_TYPE, DB_HOST, DB_PORT, DB_NAME, DB_PASS, DB_USER, WEBMASTER_EMAIL, WEBSERVER_DOMAIN,
WEBSERVER_HOST, WEBSERVER_IP, WEBSERVER_PORT, WEBSERVER_PORT_LIBRARIAN, ZEBRA_PASS, ZEBRA_USER
=head1 EXAMPLES
To override the guessed hostname and email address, run:
WEBSERVER_HOST=mysecrethostname.com.invalid \
WEBMASTER_EMAIL=webmaster@publichost.com make install
Note that if WEBSERVER_HOST does not resolve to an IP address, you will
also need to override WEBSERVER_IP.
=cut
$myhost = hostname();
$mydomain = $myhost;
$mydomain =~ s/^.*?\.//;
# This is set here to rescue systems with broken DNS
$myip = $ENV{'WEBSERVER_IP'} || inet_ntoa(scalar gethostbyname($myhost||'localhost')) || die "Cannot get our own IP address: DNS fault?";
$prefix = $ENV{'INSTALL_BASE'} || "/usr";
# These are our configuration guesses
# Keys were extracted by
# <grep -o '__.*__' etc/* | cut -f2 -d: | sort -u | sed -e 's/^/ "/;s/$/" => "",/'
%configuration = (
"__LOG_DIR__" => "/var/log",
"__DB_TYPE__" => "mysql",
"__DB_NAME__" => "koha",
"__DB_HOST__" => $myhost,
"__DB_PORT__" => "3306",
"__DB_USER__" => "kohaadmin",
"__DB_PASS__" => "katikoan",
"__WEBMASTER_EMAIL__" => 'webmaster@'.$mydomain,
"__WEBSERVER_DOMAIN__" => $mydomain,
"__WEBSERVER_HOST__" => $myhost,
"__WEBSERVER_IP__" => $myip,
"__WEBSERVER_PORT__" => "80",
"__WEBSERVER_PORT_LIBRARIAN__" => "8080",
"__ZEBRA_SRU_HOST__" => $myhost,
"__ZEBRA_SRU_BIBLIOS_PORT__" => "9998",
"__ZEBRA_SRU_AUTHORITIES_PORT__" => "9999",
"__KOHA_USER__" => "koha",
"__KOHA_GROUP__" => "koha",
"__ZEBRA_PASS__" => "zebrastripes",
"__ZEBRA_USER__" => "kohauser",
'__INTRANET_CGI_DIR__' => "$prefix/intranet/cgi-bin",
'__INTRANET_TMPL_DIR__' => "$prefix/intranet/templates",
'__INTRANET_WWW_DIR__' => "$prefix/intranet/www",
'__OPAC_CGI_DIR__' => "$prefix/opac/cgi-bin",
'__OPAC_TMPL_DIR__' => "$prefix/opac/templates",
'__OPAC_WWW_DIR__' => "$prefix/opac/www",
'__PERL_MODULE_DIR__' => ($ENV{'INSTALLSITELIB'} || sprintf($prefix."/lib/perl5/site_perl/%vd",$^V))."/koha",
'__KOHA_CONF_DIR__' => "$prefix/etc/koha",
'__ZEBRA_CONF_DIR__' => "$prefix/etc/koha/zebradb",
'__PAZPAR2_CONF_DIR__' => "$prefix/etc/koha/pazpar2",
'__MISC_DIR__' => "$prefix/misc",
'__SCRIPT_DIR__' => "$prefix/bin",
'__MAN_DIR__' => "$prefix/man",
'__DOC_DIR__' => "$prefix/doc",
'__ZEBRA_LOCK_DIR__' => "$prefix/var/lock/zebradb",
'__ZEBRA_DATA_DIR__' => "$prefix/var/lib/zebradb",
'__ZEBRA_RUN_DIR__' => "$prefix/var/run/zebradb",
'__ZEBRA_MARC_FORMAT__' => 'marc21',
'__ZEBRA_LANGUAGE__' => 'en',
'__ZEBRA_AUTH_CFG__' => 'zebra-authorities.cfg',
'__AUTH_RETRIEVAL_CFG__' => 'retrieval-info-auth-grs1.xml',
"__MERGE_SERVER_HOST__" => $myhost,
"__MERGE_SERVER_PORT__" => '11001',
"__PAZPAR2_HOST__" => $myhost,
"__PAZPAR2_PORT__" => '11002',
);
# Override configuration from the environment
foreach $key (keys %configuration) {
if (defined($ENV{$key})) {
$configuration{$key} = $ENV{$key};
}
}
$fname = $ARGV[0];
$file = read_file($fname);
$file =~ s/__.*?__/exists $configuration{$&} ? $configuration{$&} : $&/seg;
# At this point, file is in 'blib' and by default
# has mode a-w. Therefore, must change permission
# to make it writable. Note that stat and chmod
# (the Perl functions) should work on Win32
my $old_perm;
$old_perm = (stat $fname)[2] & 07777;
my $new_perm = $old_perm | 0200;
chmod $new_perm, $fname;
open(OUTPUT,">$fname") || die "Can't open $fname for write: $!";
print OUTPUT $file;
close(OUTPUT);
chmod $old_perm, $fname;
# Idea taken from perlfaq5
sub read_file($) {
local(*INPUT,$/);
open(INPUT,$_[0]) || die "Can't open $_[0] for read";
my $file = <INPUT>;
return $file;
}
__END__
=head1 SEE ALSO
Makefile.PL, ExtUtils::MakeMaker(3)
=head1 AUTHOR
MJ Ray mjr at phonecoop.coop
=cut