Bug 12668 - Stray dollar ($) -sign in opac-reserve.pl
A dollar sign is hard-coded in opac-reserve.pl and becomes apparent when trying to place a reservation
when one has "too_much_oweing" or too much fines.
Removing the dollar sign so we just get
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja 9.50.">
instead of
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja $9.50.">
Patch removes hard coded $ sign. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The dollar sign is gone and the message still displays correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 25 Jul 2014 10:43:08 +0000 (12:43 +0200)]
Bug 12662: (follow-up) Ajax-based check in does not work for some system preference settings enabled
ModItem is needed too.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Fri, 25 Jul 2014 08:56:52 +0000 (10:56 +0200)]
Bug 12662: Ajax-based check in does not work for some system preference settings enabled
To reproduce:
- enable "InProcessingToShelvingCart" or "ReturnToShelvingCart"
system preference,
- for a sample patron with 1+ checkouts, try to check in some item[s]
using checkboxes in the "Check in" column in the checkouts table
which is displayed in the "Check out" or "Details" patron account tabs,
- observe that clicking "Renew or return checked items" button only
results in ajax "spinning wheel" stuck in infinite loop; check-in
operation is not performed.
To test:
- follow the steps above to reproduce this bug
- apply patch
- redo the test; ensure that this issue is no longer reproductible.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 16 Jul 2014 13:13:34 +0000 (09:13 -0400)]
Bug 7462 - duplicate patron shows flags
When duplicating a patron the form fields for setting patron account
flags and restrictions should be hidden as it is when adding a patron.
This patch adds the correct logic to the template.
To test, duplicate an existing patron:
- Confirm that the "Patron account flags" and "Patron restrictions"
sections are not visible.
- Confirm that saving a duplicated patron works correctly.
- Confirm that the edit and new patron entry forms are unaffected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, all three points confirmed
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, small template change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 18 Jul 2014 16:22:58 +0000 (12:22 -0400)]
Bug 7237 - duplicating patron not using patron's branch
When duplicating a patron the original patron's library should be
preselected.
To test, apply the patch and choose a patron to duplicate, noting which
library is set as their home library. Click the "Duplicate" button and
cnofirm that the patron's library is preselected on the patron entry
form.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Tue, 22 Jul 2014 10:15:35 +0000 (12:15 +0200)]
Bug 12622: Fix export report as ods
Bug 11679 introduces an ods export for reports.
It looks quite buggy:
1/ You get a Perl error if the report has no results
2/ The ods file contains 1 lines less than the total results.
Test plan:
After applying this patch, try to export a report which has no results
and verify you get an ods file with headers only.
Try to export a report which has a least 1 result and verify the
generated ods has the right number of lines.
Signed-off-by: Robert Higgins <robert.higgins@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the reported problem, passes all tests and QA script.
Added the sign-off line for Robert.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 17 Jul 2014 14:57:06 +0000 (10:57 -0400)]
Bug 12596 - Backdating returns with SpecifiyReturnDate causes fines for items not overdue!
When using the backdating of returns feature, an item that is not
overdue is treated as being as many days overdue as it is *not* overdue.
This is due to the fact that _get_chargeable_units appears to return the
difference between the return date and the due date without
consideration the return date being earlier than the due date.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Circulation.t
3) Note the failure
4) Apply the second patch
5) prove t/db_dependent/Circulation.t
6) Note there are no failures
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes some badly named variables also
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, you need to activate SpecifyReturnDate.
I confirmed the problem and verified that the bug fixes it
by running the tests, but also by testing in staff.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 17 Jul 2014 16:17:48 +0000 (12:17 -0400)]
Bug 12596 - Unit Test
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sat, 12 Jul 2014 12:22:53 +0000 (14:22 +0200)]
Bug 8539: Library transfer limits page has incorrect permission
Without this patch the library transfer page required the
'borrowers' permission, which is not quite right for a page
in the administration module.
This patch changes the permission to 'parameters_remaining_permissions'
To test:
Verify the page is accessbile with:
- superlibrarian
- administration (full)
- administration, remaining permissions (without manage_circ_rules)
Verify the page is not accessible without all of those permissions.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 4 Feb 2014 17:42:55 +0000 (12:42 -0500)]
Bug 11703 - Convert checkouts table to ajax datatable [3.16.x]
When a patron has many checked out items, circulation.pl can take a very
long time to load ( on the order of minutes in some cases ). This is
primarily due to the processing of the previous checkouts list. If we
convert to this table to a datatable that fetches its data via ajax, we
can make circulation.pl far more responsive. The same should be done
with relative's checkouts as well.
Test Plan:
1) Apply this patch
2) Observe that the checkouts and relatives' checkouts tables
are now loaded asynchronously
3) Observe and verify the renew and return actions are now
ajax based and function in a manner equivilent to how they
used to.
This bug had quite a few followups, so I squashed all of them into one
change so that code is easier to follow. Original commit messages are below:
Bug 11703 - Use the ajax datatables on patron details page
Bug 11703 - Convert holds tables to ajax datatables
Bug 11703 [QA Followup 1] - Center bProcessing message over table
Bug 11703 [QA Followup 2] - Remove icons from checkout and clear buttons
Bug 11703 [QA Followup 3] - Remove references to UseTablesortForCirc
Bug 11703 [QA Followup 4] - Add back in Today's checkouts/Previous checkouts rows
Bug 11703 [QA Followup 5]
Bug 11703 [QA Followup 6] - Move strings to an include file for translation purposes
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test plan on bug report:
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11703#c98
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup]
* Bold record title, fix table width
* Change output_pref_due to output_pref
* Retain functionality of IssuesDefaultSortOrder system preferences
* Use datatables.inc in circulation.tt
* Fix up holds table details
* Add plugin to about
* fix relatives' checkouts
* add too_many string
* remove dead syspref from db
* Sort relatives' checkouts and holds tables client side
* Provide context for translation of strings
* Fix unterminated string literal, add missing paren
* Add replacement of _AUTHOR_ with title's author for holds
* Format prices correctly
* Format checkout dates correctly
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Use format instead of replace for string translation
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Use interface instead of themelang for checkboxes plugin
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Restore showing earliest renewal date for 'too early' renewals
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703: (qa-followup) fix update database entry
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Stop IE from caching ajax request
Signed-off-by: Britta Cramer <britta.cramer@inm-gmbh.de> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Allow keyboard navigation of tabs
Signed-off-by: Britta Cramer <britta.cramer@inm-gmbh.de> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Change "No data available in table" to "Loading..."
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703: (qa followup) consistency in svc
This patch removes the trailing .pl from the introduced svc scripts.
Also removes a leftover (wrong license text)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 9 Jul 2014 07:49:19 +0000 (09:49 +0200)]
Bug 11226: subscription frequencies and numbering patterns should be editable with serials permissions
Bug 7688 does now allow patrons with serials permissions to edit
subscription frequencies/numbering patterns.
Test plan:
Try to access to serials/subscription-frequencies.pl and
serials/subscription-numberpatterns.pl with the "serials" permissions.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
With patch and only serial permissions can now access
frequences and patterns.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Yohann Dufour [Tue, 24 Jun 2014 12:27:21 +0000 (14:27 +0200)]
Bug 12470: adding unit tests for the routines CheckValidBarCode and CheckIfIssuedToPatron of the module C4::Circulation.pm
The routines CheckValidBarcode and CheckIfIssuedToPatron were not tested
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Circulation/CheckValidBarcode.t t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ The result of the command has to be a success without error or warning :
t/db_dependent/Circulation/CheckValidBarcode.t ...... ok
t/db_dependent/Circulation/CheckIfIssuedToPatron.t .. ok
All tests successful.
Files=2, Tests=32, 3 wallclock secs ( 0.04 usr 0.01 sys + 2.88 cusr 0.17 csys = 3.10 CPU)
Result: PASS
Yohann Dufour [Mon, 16 Jun 2014 11:46:24 +0000 (13:46 +0200)]
Bug 12417: adding the units tests of the module Koha::Borrower::Files.pm
The module Koha::Borrower::Files.pm was not tested
To test:
1/ Execute the command: prove t/db_dependent/Borrower_Files.t
2/ The command has to print:
t/db_dependent/Borrower_Files.t .. ok
All tests successful.
Files=1, Tests=23, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.47 cusr 0.08 csys = 1.60 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Squashed patches.
Now test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Viktor Sarge [Mon, 16 Jun 2014 11:21:06 +0000 (12:21 +0100)]
Bug 9245: Fixes visual bug with fines tab not highlighting
This patch makes shure that mancredit.pl, maninvoice.pl and pay.pl passes the value "finesview=1" that makes the tab active.
Test plan:
1) Go to a library user and the fines tab. Note that the "Fines" tab loses it's highlight when you click "Pay fines", "Create manual invoice" and "Create manual credit".
2) Install the patch.
3) Redo the first step and make shure that the left menu tab "Fines" is now highlighted all the time.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as advertised, no regression found on the rest of the tabs.
Mathieu Saby [Wed, 9 Oct 2013 18:28:27 +0000 (20:28 +0200)]
Bug 11030 : add fields 947,969,359 in unimarc_complete french framework
This patch must be tested on top of bug 11021
This patch adds 3 fields to unimarc_complete french framework
- 359 (2-a-b-c-d-e-f-g-h-i-p-u-v) used by Sudoc network, to be displayed in tab 3
- 947 (c) used by Electre
- 969 (a-h) used by Electre
I don't know the difference between 969a and 969h so I gave them quite the same name
To test :
1) take a fresh Koha with unimarc marcflavor
2) in web installer, select french language, unimarc marflavor and "Grilles de catalogage complètes".
3) check default framework in Administration > MARC Frameworks : it should contains 359/947/969 fields
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Wed, 9 Oct 2013 18:28:09 +0000 (20:28 +0200)]
Bug 11021: Suppress unneeded fields in unimarc_complet default Framework
First patch, for "complete" framework, used by academic libray
900, 901, 910, 918, 920,950,960,970,980,987 fields were useless. I removed them.
I kept only the fields mentionned in Sudoc documentation http://documentation.abes.fr/sudoc/formats/loc/index.htm
916 field is not cited in that page, but it belongs to Sudoc format.
I kept also 2 fields specific to Electre in 2013 :
902 niveau de lecture (Electre)
903 indexation (Electre)
I also added to the name of the 9XX fields I kept the mention (Sudoc) / (Electre) / (Koha), so it could be easier for librarians to know what is the purpose and the origin of each field
I don't make an updatedatabase, because some libraries could still be using these fields for good or bad reasons.
To test :
1) take a fresh Koha with unimarc marcflavor
2) in web installer, select french language, unimarc marflavor and "Grilles de catalogage complètes".
3) check default framework in Administration > MARC Frameworks : it should be without 900,901,910,918,920,950,970,980,987
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 1 Jul 2014 15:29:56 +0000 (11:29 -0400)]
Bug 12511 - Novelist Select not using https in bootstrap
In prog we have:
[% IF ( NovelistSelectProfile ) %]
<script type="text/javascript"
src="https://imageserver.ebscohost.com/novelistselect/ns2init.js"></script>
[% END %]
but in bootstrap we have
[% IF ( NovelistSelectProfile ) %]
<script type="text/javascript"
src="http://imageserver.ebscohost.com/novelistselect/ns2init.js"></script>
[% END %]
Because bootstrap isn't using https, we get an error like this:
[blocked] The page at
'https://koha.mylibrary.com/cgi-bin/koha/opac-detail.pl?biblionumber=105315&query_desc=kw%2Cwrdl%3A%20home'
was loaded over HTTPS, but ran insecure content from
'http://imageserver.ebscohost.com/novelistselect/ns2init.js': this
content should also be loaded over HTTPS.
Test plan would require having a subscription to Novelist Select.
I think this is trivial enough to go without.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Very small change, trusting Kyle and the sign-off here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 12 Jun 2014 09:06:58 +0000 (11:06 +0200)]
Bug 12409: Fix fields order on exporting to bibtex
The C4::Record::marc2bibtex subroutine supposes hashref keys are sorted
which is wrong with perl 5.18
Note that the t/db_dependent/Record.t fails without this patch.
Test plan (for perl >= 5.18 only):
1/ prove t/db_dependent/Record.t should return green
2/ Try to export a record to bibtex and verify the order is correct
(should be author, title, year, published, etc.).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Wrong Bug number on heading.
Work as described, test pass, no koha-qa errors.
The problem is to think that a hash returns
keys in a particular order, that's not true
and no matter which perl version.
Code as was left is... misleading.
Comments talks about a hash, which is no more.
On array asignment "a => b" is equivalent to "a, b",
but the former is usually used on hashes, so a
replacement of '=>' by ',' could clarify what are we storing.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixing the comments in a follow-up patch.
Tests pass now without problems and records export ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Thu, 19 Jun 2014 08:17:53 +0000 (10:17 +0200)]
Bug 12451 - circulation rule cant be edited if itemtype contains a space character
When an itemtype description contains a space character like " Book"
(often used to set this itemtype as first in sorted lists), the edition
of an existing circulation rule does not work, it selects the default
itemtype. Same for patron category.
It's because the JavaScript code performs a trim on value existing in
table itm = itm.replace(/^\s*|\s*$/g,''); This patch adds trim on select
options in editing line.
Test plan :
- Create an itemtype with a leading or trailling space in description :
ie " Book"
- Go to cgi-bin/koha/admin/smart-rules.pl
- Create a rule with this itemtype, Unit=hours and Hard due date=Exactly
on 31/12/2015 (any date)
- Click on Edit on this rule line
=> Without this patch, the default itemtype is selected in edition
line
=> With this patch, the correct itemtype is selected in edition line
Check others selects are ok :
- Create a rule with Unit=hours and Hard due date=Exactly on
31/12/2015 (any date)
- Click on Edit on this rule line
=> The correct options are selected
Same tests with a patron category containing a leading or trailling space in description
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 25 Jun 2014 17:07:52 +0000 (13:07 -0400)]
Bug 12220 - bootstrap not responsive on all devices
The bootstrap theme includes a meta tag attribute which disables zooming
on some devices. This was unintentional and not desirable. This patch
removes the problematic attribute.
David Cook [Mon, 29 Jul 2013 03:02:26 +0000 (13:02 +1000)]
Bug 10652 - Ajaxfileupload.js failing in IE9 for local image upload
This patch adds a try/catch to the Javascript for adding the iframe
element. The try will work for IE8 and older versions, while newer
versions and other browsers will be covered by the check.
Test Plan:
1) Try uploading a local cover image in IE9
2) Notice that your page is reloaded with no result (except the
pop-up of a Javascript error, if you have error reporting on in
your browser).
3) Apply the patch
4) Trying uploading a local cover image again
5) Notice that it uploads correctly
6) Repeat steps 4 and 5 for IE8, IE7, and/or other modern browsers.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested in IE10 in IE10 "browser mode" and IE9 mode as well as in
Firefox. Uploads work correctly with book cover images and in MARC
uploads.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Also verified as working in Chrome.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Doesn't break functionality and fixes a known problem. I'll push this for
stable branches to use it, but will fill a new bug for updating AjaxFileUpload.js
from upstream.
Fridolin Somers [Thu, 5 Jun 2014 15:21:28 +0000 (17:21 +0200)]
Bug 11857 - Number of patrons on a patron list not accurate
When creating a patron list with only 1 patron, the patron
lists page says that the list contains 3 patrons.
When creating a patron list with only 1 patron, it works fine.
This is caused by the fact that access on "patron_list_patrons"
Koha::Schema::Result::PatronList object returns an hash if one
result and an array if more results.
See similar problem at
http://permalink.gmane.org/gmane.comp.lang.perl.modules.template-toolkit/7250
This patch replaces by the call on resultset and then the use of
"count" method.
Test plan :
- Go to patron lists : /cgi-bin/koha/patron_lists/lists.pl
- Create a new patron list LIO
- Add one patron
- Create a new patron list LIM
- Add 2 patrons
- Go to patron lists : /cgi-bin/koha/patron_lists/lists.pl
=> Without this patch you see :
Name Patrons in list
LIO 3
LIM 2
=> With this patch you see :
Name Patrons in list
LIO 1
LIM 2
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Confirmed the problem and that
the patch fixes it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Martin Renvoize [Wed, 21 May 2014 14:18:14 +0000 (14:18 +0000)]
BUG 12304: LDAP auto-provisioning set default messaging preferences
LDAP auto-provisioning should set default messaging preferences upon
creation of a user.
Signed-off-by: Ulrich Kleiber <ulrich.kleiber@bsz-bw.de>
Manually applied to 3.12.9 and it works beautifully in test and production.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Yohann Dufour [Fri, 20 Jun 2014 09:22:31 +0000 (11:22 +0200)]
Bug 12456: The file C4/Maintainance.pm, and by extension the file t/Maintainance.t, has been removed
The file C4/Maintainance.pm is not used anywhere, it can be removed, and by extension, the file t/Maintainance.t too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
A relic from the past :)
No references to this file or it's subs
No errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Yohann Dufour [Fri, 20 Jun 2014 08:42:13 +0000 (10:42 +0200)]
Bug 12455: adding unit tests for the module C4/SMS.pm
The module C4/SMS.pm was not tested
Test plan:
1/ Execute the command : prove t/SMS.t
2/ The result has to be a success without error or warning :
t/SMS.t .. ok
All tests successful.
Files=1, Tests=7, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.17 cusr 0.02 csys = 0.23 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Replace stub test, all test pass.
Removed "use strict/warnings", no need for that with "use Modern::Perl"
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Thu, 5 Jun 2014 07:28:29 +0000 (09:28 +0200)]
Bug 12361 - No default value for opaccolorstylesheet syspref
After install, the syspref opaccolorstylesheet will by default contain colors.css.
This file exist in OPAC prog theme but not in bootstrap theme.
This patch set the syspref empty by default in installer/data/mysql/sysprefs.sql.
Test plan :
- Create a fresh install
- Look at opaccolorstylesheet content
=> without this patch : is contains colors.css
=> with this patch : it is empty
- Enable opac bootstrap theme
- Go to opac main page
- Look at HTTP errors (with firebug for example)
=> without this patch : there is a 404 error because colors.css does not exist
=> with this patch : no such error
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Mon, 23 Jun 2014 20:15:47 +0000 (08:15 +1200)]
Bug 7143: Updating new developers
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Edit: Switched from spaces to tabs in history.txt. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
505 contents notes are not displayed correctly in the Bootstrap theme
because the relevant CSS was not included in the transfer from prog.
This patch adds it.
To test, apply the patch and view a record in the OPAC which contains a
505 note with contents details. Clear your browser cache if
necessary. The contents should appear correctly, with a line break for
each entry.
I tested with the same biblio as shown in attachment #1 (imported from Library of Congress)
After applying patch the record displays the same as in prog theme Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CSS change only. Works as expected, no problems found.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Conflicts:
koha-tmpl/opac-tmpl/bootstrap/css/opac.css
Jonathan Druart [Fri, 2 May 2014 10:06:30 +0000 (12:06 +0200)]
Bug 11715: Update POD for get_template_and_user
If flagsrequired is set, authnotrequired should be 0.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11715: require authentication for various staff scripts
To test:
[1] Verify that item record creating and editing during the
acquisitions process continues to work.
[2] Verify that calling services/itemrecorddisplay.pl without
a valid user session fails.
[3] Verify that authentication is required for making a new
order from a suggestion, transferring an order, doing a
Z39.50 search from acquisitions, displaying the record
card view in the staff interface, and running the till
reconciliation report (/cgi-bin/koha/reports/stats.screen.pl)
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified all changed scripts are not accessible witout a valid
user session, but are with one.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Sun, 16 Mar 2014 20:15:05 +0000 (09:15 +1300)]
Bug 11715 : require authentication for the cataloging authorities Z39.50 search
To test:
1/ go to /cgi-bin/koha/cataloguing/z3950_auth_search.pl when you are not
logged in, notice no log in is enforced
2/ Apply patch
3/ go to /cgi-bin/koha/cataloguing/z3950_auth_search.pl notice you now
need to login
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Mon, 10 Mar 2014 21:56:53 +0000 (10:56 +1300)]
Bug 11715: require authentication for the cataloging Z39.50 search
To test:
1/ go to /cgi-bin/koha/cataloguing/z3950_search.pl when you are not
logged in, notice no log in is enforced
2/ Apply patch
3/ go to /cgi-bin/koha/cataloguing/z3950_search.pl notice you now need
to login
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Mon, 10 Mar 2014 21:51:00 +0000 (10:51 +1300)]
Bug 11715: Set the default of authnotrequired = 0 in get_template_and_user
To test:
Verify that pages in the OPAC and staff interface display correctly.
Note that there are cases where 'authnotrequired' was not passed
at all to get_template_and_user, so there may be pages that start
requiring authentication. Whether that is correct or not depends
on context.
Follow up patches are to remove all the unnessecary setting of this
value, so that the only places we set are when we do want
authnotrequired=1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
David Cook [Fri, 6 Jun 2014 04:01:17 +0000 (14:01 +1000)]
Bug 9093 - 008 forgetting what material type was chosen
This patch adds material type checking to the MARC21 008 tag editor,
based on value from the leader. That is, the 008 tag editor
will choose an initial material type based on the leader 06
(and if necessary the leader 07 position)
_TEST PLAN_
1) Create a new record or open an existing bib record
2) Change position 6 from its current value (probably "a") to
"c" or "e" or "g" or "m" or "p". (See the end of this message
for a comprehensive list of 06 values to try.)
3) Open the 008 tag editor
4) Note that it still says BKS even though it should say "MU"
or "MP" or "VM" or "CF" or "MX".
5) Apply the patch
6) Repeat steps 2 and 3.
7) Note that the 008 tag editor now shows the correct material
type based on the leader.
8) For more comprehensive checking, try switching position 6
back to "a" and changing position 7 to "b" instead of "m".
9) Note that it will switch from "BKS" to "CR".
10) Fin
Comprehensive mapping:
Field 008/18-34 Configuration
If Leader/06 = a and Leader/07 = a, c, d, or m: Books
If Leader/06 = a and Leader/07 = b, i, or s: Continuing Resources
If Leader/06 = t: Books
If Leader/06 = c, d, i, or j: Music
If Leader/06 = e, or f: Maps
If Leader/06 = g, k, o, or r: Visual Materials
If Leader/06 = m: Computer Files
If Leader/06 = p: Mixed Materials
http://www.loc.gov/marc/bibliographic/bdleader.html
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, nice job.
koha-qa complains for a tab char, removed on followup.
Mode change on TT file (+x), removed.
No other errors
NOTE: It would be desirable to update LEADER values
to reflect changes on 008.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Awesome work David.
Yohann Dufour [Tue, 17 Jun 2014 14:53:14 +0000 (16:53 +0200)]
Bug 12427: adding unit tests of module C4::Members::Attributes.pm
The subroutines UpdateBorrowerAttribute, SearchIdMatchingAttribute, DeleteBorrowerAttribute, GetBorrowerAttributes, GetAttributes, GetBorrowerAttributeValue, SetBorrowerAttributes and CheckUniqueness of the module C4::Members::Attributes.pm were not tested.
Test plan:
1/ Execute the command: prove t/db_dependent/Members_Attributes.t
2/ The result has to be:
t/db_dependent/Members_Attributes.t .. ok
All tests successful.
Files=1, Tests=60, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.45 cusr 0.08 csys = 1.58 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test with patrons on db having issues and attributes
New test file, all test pass
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Mon, 16 Jun 2014 11:30:03 +0000 (07:30 -0400)]
Bug 11292 [QA Followup] - Use noEnterSubmit instead of new keypress handler
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 22 May 2014 12:35:16 +0000 (08:35 -0400)]
Bug 11292 - barcode scanner clicking 'save'
When cataloging a bib record if you scan an ISBN barcode in the barcode
scanner clicks the 'save' button before the cataloging is done. This did
not happen in 3.10, but is happening again in 3.12.
Test Plan:
1) Open the marc editor
2) Focus on a field, hit the enter key
3) Note the record tries to save
4) Focus on an indicator, hit the enter key
5) Note the record tries to save
6) Apply this patch
7) Repeat steps 2 and 4, note the record no longer
tries to save upon carriage return
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Patch tested with a sandbox.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Mon, 23 Jun 2014 09:43:48 +0000 (11:43 +0200)]
Bug 12086: qa-followup: remove warning on launching unit tests
Without this patch, the following warning appears:
t/db_dependent/Holds/RevertWaitingStatus.t .. Subroutine
C4::Context::userenv redefined at
t/db_dependent/Holds/RevertWaitingStatus.t line 25.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 17 Apr 2014 16:10:21 +0000 (12:10 -0400)]
Bug 12086 - Hold priorities incorrect, when waiting status was reversed
1) Test record has 1 single item, checked out to patron X
2) Place 3 holds for patrons A, B and C, all title level hold this time
A, B, C, item branches and staff branch are the same.
3) Return item, confirm hold
4) Confirm item is now waiting for patron A
Priorities are: A = Waiting, B = 1, C = 2
5) Open patron account of user B, checkout book
Koha asks: Item X has been waiting for patron A... Revert
waiting status
Confirm.
6) Check priorities:
Hold list shows: A = 1, C = 1
Database says: A = 1, C = 3
7) Apply this patch
8) Repeat steps 1-6
9) Note the priorities are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan correctly predicts the error and the correction made by the
patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jesse Weaver [Tue, 10 Jun 2014 01:25:47 +0000 (19:25 -0600)]
Bug 12393 - Depend on SSL module for LWP, for OverDrive
The OverDrive integration needs to connect to an authentication server
over HTTPS, and many systems do not install the necessary module
(LWP::Protocol::https) by default.
Test plan (for patch):
1) Run koha_perl_deps.pl -a, verify that LWP::Protocol::https appears in
listing.
Test plan (to verify that LWP::Protocol::https is necessary, needs OverDrive access):
1) Remove LWP::Protocol::https (liblwp-protocol-https-perl under Debian).
2) Run an OverDrive search on the OPAC, it should fail.
3) Reinstall LWP::Protocol::https.
4) Rerun OverDrive search, it should now succeed.
Note: older versions of Debian do not need to install LWP::Protocol::https separately;
the Debian scripts have been updated to reflect this divide.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Yohann Dufour [Mon, 16 Jun 2014 07:31:13 +0000 (09:31 +0200)]
Bug 12416: the subroutine 'ok' is replaced by the subroutine 'is'
The use of the subroutine 'is' is prefered over the subroutine 'is'
To test: execute the commande prove t/db_dependent/Borrower_Debarments.t
To command has to print:
t/db_dependent/Borrower_Debarments.t .. ok
All tests successful.
Files=1, Tests=22, 1 wallclock secs ( 0.03 usr 0.01 sys + 1.42 cusr 0.08 csys = 1.54 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comments on last patch
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Yohann Dufour [Mon, 16 Jun 2014 07:13:35 +0000 (09:13 +0200)]
Bug 12416: add the test of DelUniqueDebarment
The subroutine DelUniqueDebarment was not tested
To test: execute the command prove t/db_dependent/Borrower_Debarments.t
The command has to print:
t/db_dependent/Borrower_Debarments.t .. ok
All tests successful.
Files=1, Tests=22, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.43 cusr 0.07 csys = 1.54 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comments on last patch
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Zeno Tajoli [Fri, 20 Jun 2014 09:47:00 +0000 (11:47 +0200)]
Bug 12299: Translate marc21_relatorterms.sql into Italian
To test:
- Apply this patch.
- Reset your DB (DROP DATABASE, CREATE DATABASE -- whatever method you
prefer)
- Install it-IT templates on command line
- Run the webinstaller using it-IT
- Follow the steps and choose all under 'opzionali'
=> SUCCESS: no errors
=> Sign this
=> Extra: see the authorised value 'RELTERMS' and check if you like the
translation
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested loading file.
Two errors fixed:
a) duplicate line ... ('RELTERMS','con', 'Conservatore')
b) missing semicolon ... ('RELTERMS','voc','Cantante')
With that file loads Ok
No koha-qa errors
Ooops, forget the fix. Resubmited
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds an optional SQL file to the Italian installer - works as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removed BOM from file.
Owen Leonard [Thu, 22 May 2014 16:22:44 +0000 (12:22 -0400)]
Bug 12255 - Amazon cover images have useless image alt text in bootstrap
"item-thumbnail" is not a useful alt text for an Amazon book cover
image. Better would be the link's title text, "View on Amazon.com." This
patch makes this correction. (Rather than "View at Amazon.com" which
doesn't sound correct to me).
To test you must have the OPACAmazonCoverImages system preference
enabled. Log in to the OPAC and view your list of checked-out titles.
The alt text for cover images should be "View on Amazon.com." Test in
both prog and Bootstrap.
NOTE: You'll need one to be overdue in order to trigger both
cases. Examine the HTML for both tabs in the person details
page.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This fixed the cover alt texts for Amazon covers in the patron
account for checkouts, overdues and holds.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Fri, 20 Jun 2014 12:54:07 +0000 (14:54 +0200)]
Bug 12458 - Holidays calendar has wrong colors for weekly and yearly repeatable
In Tools / Calendar, the colors in the calendar for weekly and yearly repeatable are different from the color of the "Key" legend.
This patch sets the colors used in the "Key" legend to the cells if calendar.
Test plan :
- Go to Tools/Calendar
- Add a weekly repeatable holiday
- Check its color in calendar is the same as the text "Holiday repeating weekly"
=> Without this patch, it's green instead of yellow
- Add a yearly repeatable holiday
- Check its color in calendar is the same as the text "Holiday repeating yearly"
=> Without this patch, it's yellow instead of orange
- Check the color of others holydays types are OK
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I'd like to see today's date a clearly different color from the
weekly repeated holiday, because now they're close in color.
But this patch does exactly what it says and should so I'm signing
off.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Legend, headings and calendar colors now match.
No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12226 - A user with the database username/userid can access staff with full permissions
This patch implements 2 suggestions on comment #3
- Prevents creation of a new user with same userid
of database user
- When checking password, if userid matches database user,
only check against pass on config file
To test:
1. Create a new user with same login as database user
any password different from real db user
2. Check that you can login on staff using this user/pass
and you are superlibrarian
3. Apply the patch
4. Login again using new pass, it must fail
5. Login again using db pass, you are now superuser,
but system does not warn you :( No problem, that's
for having one borrower with that login
6. Delete user with same login as db user
7. Try to create one again as in 1, system must return
an error of duplicate login!
8. Check for no regressions on user/pass authentication
Resubmited, has an error
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
This works nicely and as described.
Also editing the former 'superuser' will force you to
change the userid in order to save any other change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 20 Feb 2014 15:06:36 +0000 (10:06 -0500)]
Bug 11801: In transit hold items incorrectly labels as "Waiting to be pulled" on request.pl
If an item needs to be transferred to fill a hold, the hold will be
listed as 'Waiting to be pulled" while it is in transit.
Test Plan:
1) Place a hold for pickup at another library
2) Check in the item, confirm the hold transfer
3) View the holds for that record ( request.pl )
4) Note the priority is "In transit" and the status is 'Waiting to be
pulled".
5) Apply this patch
6) Reload the holds page
7) Note the status is now "Item being transferred to $branch"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Yohann Dufour [Wed, 11 Jun 2014 14:26:18 +0000 (16:26 +0200)]
Bug 12406: adding the column maxsuspensiondays in the tests
The column maxsuspensiondays was added in the datatable but not in the tests, which caused the failure of the tests
test plan: execute prove t/db_dependent/Circulation_Issuingrule.t
The command has to print:
t/db_dependent/Circulation_Issuingrule.t .. ok
All tests successful.
Files=1, Tests=9, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.35 cusr 0.08 csys = 1.47 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Failure on test before patch, success after
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 9 Jun 2014 12:58:30 +0000 (08:58 -0400)]
Bug 12380 - can't tab to save buttons on add item
Many form elements on the add item page are giving a tabindex of "1" by
the script. This seems to make it impossible to tab through the add item
form fields onto the save buttons. I don't see a reason to set an
explicit tabindex of "1," so this patch removes it.
To test, apply the patch and open an item for editing. Try tabbing
through the add item form fields. It should be possible to tab through
the fields and onto the submit buttons at the bottom. Test again when
adding a new item.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Sat, 31 May 2014 17:32:24 +0000 (12:32 -0500)]
Bug 11958: Fix typo in classification source help
The Classification Sources help file said the source was in the 942$2 but it's in the 952$2 and 94$2 so this patch fixes that.
To test:
* Go to Admin > Classification Sources
* Click Help
* Confirm the Help file is right now
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
String change, no errors.
Note: Perhaps change "Authorized Values ..." for "Authorized values ..."
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12338: Remove smartmatch operator from C4/Serials.pm
This patch removes the use of the 'when' smartmatch operator from
Serials.pm
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Tue, 3 Jun 2014 07:24:23 +0000 (09:24 +0200)]
Bug 12343 - TransformKohaToMarc() is adding MARC subfields in random order
TransformKohaToMarc() function in C4/Biblio.pm iterates through it's
argument - which is a hashref - using 'each'. Perl is not guaranteed
to return hash keys in any particular order (not to mention that
in more recent perl versions, explicit hash key order randomization
is to be expected).
As a consequence:
1) For biblio records added via acquisition (order from a new/empty
record, order from a suggestion), freshly created MARC biblio records
doesn't always have 260 $b and 260 $c stored in the proper order
2) Holdings data exported for zebra indexing as 952 fields may have
subfields generated in more-or-less random order. While it probably (?)
does not affect zebra indexing/searching in any significant way,
end result is prone to be somehow ugly (which can be a potential
issue e.g. for people running Z39.50 server) and is not guaranteed
to be consistent; different records - or even different items in the
same record, can have 952 subfields generated in indiscriminate order.
This patch fixes abovementioned issues via introducting explicit
sorting (by subfiled code/letter) for subfield pairs before they
are added to the MARC record.
To test:
1/ Try to confirm and reproduce both issues (use perl 5.18.1 if possible
for more randomly ordered results).
2/ Apply patch.
3/ Redo the tests; ensure that both issues are now fixed and that there
are no apparent regressions of any kind (especially regarding to 952 fields
generated for zebra [re]indexing).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12396 - MTT FIX: Due notices (DUEDGST) are multiplicated and all of them are sent to everybody who is about to receive ODUEDGST.
So the first patron receives correct letters, but the followings received
all the previous ones AND his letters.
Eventually you end up with !n letters in message_queue where n = amount of patrons
receiving due messages as digest and having something due.
Eventually we got 4 000 000 ODUEDGST-letters of which 1 100 000 were sent to our patrons :)
This is madness!
Test plan:
0/ Delete the content of the message_queue table.
1/ Pick 3 patrons and set them to receive due messages as digest.
2/ Check 1 item out for 3 separate patrons and specify a due date today.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 6 notices (1+2+3 [!n]). Now, you get 3 notices, 1 for each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Problem exis.
Patch work as described following test plan.
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mason James [Wed, 28 May 2014 01:59:20 +0000 (13:59 +1200)]
Bug 3144 - anti-spam for opac-suggestions
this patch adds a negative-captcha feature to the purchase suggestions form
some info for the curious...
http://nedbatchelder.com/text/stopbots.html
https://github.com/subwindow/negative-captcha
http://www.rubydoc.info/github/subwindow/negative-captcha/frames
to test this patch...
1/ apply patch
2/ enable 'suggestion' and 'AnonSuggestions' sysprefs
3/ attempt to add a 'purchase suggestion' in OPAC
adding the suggestion should succeed
4/ edit the koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-suggestions.tt file,
to reveal the hidden 'negcap' field
replace line 87 opac-suggestions.tt, from...
<li id="negcap" style="position: absolute; left: -2000px;">
to ...
<li id="negcap">
5/ attempt to add another suggestion, and populate the 'negcap' field
adding the suggestion should fail
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove the bug report number in the comment since git log
cans provide the same result.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 20 May 2014 18:58:32 +0000 (14:58 -0400)]
Bug 12295: fix Javascript error when merging authorities
Attempting to merge authorities results in the following error:
Uncaught SyntaxError: Unexpected token u authorities-home.pl:284
showMergingInProgress authorities-home.pl:284
(anonymous function) authorities-home.pl:297
o jquery.js:2
p.fireWith jquery.js:2
e.extend.ready jquery.js:2
c.addEventListener.B
This was the result of the upgrade of jquery-cookie by the patch
for bug 11369; newer versions of jquery-cookie changed the return of
$.cookie('foo') from null to undefined when the cookie is not present.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No test plan, no errors.
Test
1. search some authorities
2. click merge, on browser dev console pops reported error message
'Unexpected token u authorities-home.pl...'
No way to marge auths
3. with pach applied, merging works again
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 21 May 2014 11:14:50 +0000 (07:14 -0400)]
Bug 12025 - Inventory tool fails with "Could not reads headers", or sometimes a timeout
For libraries with large numbers of records, using a file of barcodes in
the inventory tool without selecting filters to limit the catalog
selection to compare against can result in an error of "could not read
headers" or a page timeout.
When you upload a file of barcodes, and do not specify any filters on
the rest of the form, it effectively runs GetItemsForInventory() such
that *every* item in the database is returned. On a large enough
database, this takes so long that the script times out.
The current documentation in the manual implies that if you upload a
file of barcodes, the *only* thing it does is set the date-last-seen
field. This is not entirely true; it also tries to compare the list of
scanned items to what is expected to be seen in the list of items.
The work-around for libraries with a large number of item records is to,
when uploading a file of barcodes, to also set the filters (e.g.,
library, shelving location, call number range, etc.) to
specify the range of items that the file of barcodes corresponds to.
This patch adds a warning when a librarian attempts to upload a
barcode list file for comparison without selecting any filters
to limit the catalog selection.
Test Plan:
1) Apply this patch
2) Browse to the inventory tool
3) Click the "Choose File" button, select a file
4) Click the "Submit" button
5) You should see a warning message
6) Click "Cancel"
7) Select one of more filters
8) Click the "Submit" button
9) This time the script should proceed without triggering the warning.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Viktor Sarge [Mon, 2 Jun 2014 10:07:07 +0000 (11:07 +0100)]
Bug 12336: Author of reserved book is not displayed in opac-user.pl
This patch adds a line in opac-user.pl passing author info to opac-user.tt
Thanks to cait for helping me out and showing me how to solve this with half the amount of code.
Test plan:
* Reserve a book.
* Go to the opac and log in as the patron you reserved the book for.
* Apply the patch with change to opac-user.pl
* Revisit the opac and refresh it.
* See if author now shows up
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Created a hold. Author is not shown n the public catalogue before
applying the patch, but it does show after applying the patch. Way
to go, Viktor!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Thu, 22 May 2014 15:24:52 +0000 (11:24 -0400)]
Bug 12280 - "Others..." reason for suggestions not showing in Bootstrap OPAC
If you accept or reject a suggestion using the "Others..." option and
entering a reason manually, the text is not showing up in the Bootstrap
OPAC theme as it does in CCSR and prog. This patch corrects the problem.
This patch also adds a missing [% USE AuthorisedValues %] which would
cause errors if the template tried to display a custom suggestion status
as defined in the SUGGEST_STATUS authorized value category.
To test, accept or reject a suggestion and specify a custom reason. View
that suggestion in the Bootstrap OPAC and confirm that the custom reason
is displayed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Thu, 22 May 2014 13:14:18 +0000 (09:14 -0400)]
Bug 12308 - show all title subfields on the holds list
The patron summary page in the bootstrap OPAC does not show subtitle in
the list of checkouts, overdues, or holds. This patch corrects this.
To test, set your OPAC theme to bootstrap and log in to the OPAC as a
user who has items checked out, items overdue, and items on hold. At
least one of each of those should be a title which has a subtitle as
defined in Administration -> Keyword to MARC mapping. Subtitles should
appear correctly under the "Checked out," "Overdue," and "Holds" tabs.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Pushed to master by me in my role as OPAC module maintainer
Jonathan Druart [Tue, 27 May 2014 08:12:20 +0000 (10:12 +0200)]
Bug 12315: fix sending of duplicate advanced notices (and sending advanced notices to wrong patron)
Bug 10833 introduced a variable loop but does not reset it every
iteration.
So the first patron receives correct letters, but the following ones
received all the previous ones as well as their own notices
Test plan:
0/ Delete the content of the message_queue table.
1/ Define advanced notices sent 2 days in advance for 2 patrons.
2/ Check 1 item out for each one and specify a due date today + 2 days.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 3 notices. Now, you get 2 notices, 1 for
each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work well, no errors.
Tested following test plan, printing on screen or saving into db,
3 messages before, 2 after (advance_notices.pl -v -n -m 2 -c)
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
David Cook [Wed, 21 May 2014 03:22:10 +0000 (13:22 +1000)]
Bug 11014 - Slip Print Problem in Chrome
Currently, slips cannot be printed in circulation, members, or the
self check out when using Chrome.
This patch adds a timer of 1ms which allows Chrome's custom code to
prevent "window.close" occuring before the user has dealt with the
print window.
This patch also allows admins to use the 'IntranetSlipPrinterJS'
system preference to override the slip printing code by centralizing
all the slip printing code in slip-print.inc, and including this JS
anywhere it's needed in the staff client.
I haven't used this include in the OPAC SCO but perhaps it would make
sense to do so as well (even if it isn't referred to in the syspref's
name).
_TEST PLAN_
1) Using Chrome on Windows (not sure if this is an issue on other OSes),
try to print a slip in the following locations:
Fines Tab -> Print button
koha-tmpl/intranet-tmpl/prog/en/modules/members/printfeercpt.tt:
2) Note that each time you try to print, a new print page is created
but closed before you have a chance to print.
3) Apply the patch
4) Repeat Step 1
5) Note that the print page now doesn't close until after you've
chosen to print or cancel.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 21 May 2014 11:17:54 +0000 (13:17 +0200)]
Bug 12301: Remove warnings on translate scripts
Using perl v5.18, the following is warned on updating/installing
templates:
Smartmatch is experimental at ./translate line 54.
Moreover, the following should exist with previous perl versions:
perlcritic xgettext
Subroutine prototypes used at line 29, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 44, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 60, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 72, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 89, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 105, column 13.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 127, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 136, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 190, column 7.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 237, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 238, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 238, column 5. See page 207 of PBP.
(Severity: 5)
Subroutine prototypes used at line 277, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 311, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 350, column 9. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 350, column 9. See page 207 of PBP.
(Severity: 5)
Bareword file handle opened at line 353, column 5. See pages 202,204 of
PBP. (Severity: 5)
Bareword file handle opened at line 359, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 359, column 5. See page 207 of PBP.
(Severity: 5)
perl -wc xgettext.pl
\1 better written as $1 at TmplTokenizer.pm line 474.
main::token_negligible_p() called too early to check prototype at
xgettext.pl line 52.
xgettext.pl syntax OK
Test plan:
Apply this patch and verify the warnings/errors does not appear anymore
and no regression is found on creating/updating/installing templates.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errros.
Tested with perl v5.18.2
No warnings, no problem detected on create/update/install i18n files
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Robin Sheat [Mon, 26 May 2014 01:28:00 +0000 (13:28 +1200)]
Bug 12312 - correctly upgrade under Apache 2.2
As the way we need to reference Apache instance names has now changed
between 2.2 and 2.4, we need to try it out both ways to make sure we get
it right.
This also allows koha-create/koha-disable to try the .conf version of
the name if the first one doesn't work.
To test:
* Create an instance on an Apache 2.2 system with koha < 3.16
* Upgrade to 3.16 with this patch, saying 'yes' to the renaming question
** Make sure you don't see the warning: Warning: problem enabling $site
in Apache
* Do a 'service apache2 restart'
* Make sure you can still access the instance
* Make sure that /etc/apache2/sites-enabled/instance.conf exists as a link
to /etc/apache2/sites-available/instance.conf
* Check that koha-create and koha-remove behave like you'd expect.
Note:
* If you need to make debconf forget that it asked you the question
about renaming so that it'll do it again, then run:
echo "unregister koha-common/rename-apache-vhost-files" | sudo debconf-communicate koha-common
* 'debconf-show koha-common' will show you the current debconf
configuration.
Stéphane Delaune [Mon, 12 May 2014 14:58:14 +0000 (16:58 +0200)]
Bug 12229: when exporting MARC records (as ISO2709), refuse to output records that would be longer than the MARC limit
Test:
1. Edit a bib record, add 100.000 chars text to 500a
2. Go to Tools -> Export data (or run tools/export.pl on
the command line)
3. Verify that exporting as XML includes the record
4. Verify that exporting as MARC does not include the record,
and that you get the following warning:
export.pl: record (number 2025) length 102668 is larger than the MARC spec allows (99999 bytes) at...
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Pasi Kallinen [Wed, 7 May 2014 06:49:01 +0000 (09:49 +0300)]
Bug 12207: fix TTparser's handling of TT directives that contain "]"
This piece of TT code:
[% SWITCH lang %]
[% CASE ['en', 'eng'] %]English
[% CASE ['fr', 'fre'] %]French
[% CASE ['it', 'ita'] %]Italian
...
[% CASE %][% lang %]
[% END %]
is parsed by the TTparser.pm wrong. In the po-files, it shows up as:
...
All the "CASE [ ... ]" codes are shown as "ERROR".
This happens if any TT statement contains a ']' in it - the TTParser
looks for anything that starts with [% and ends with ].
This patch fixes it so that it expects TT directives to end
with '%]'.
To test:
1) cd misc/translator/
2) perl translate update xx-YY
3) for x in po/xx-YY-*.po; do cp "$x" "${x/.po/.po.bak}"; done
4) apply patch
5) perl translate update xx-YY
6) for x in po/xx-YY-*.po; do diff -Nurd "$x" "${x/.po/.po.bak}"; done
the only changed lines should be those that apply to msgid's with
ERROR-parameters.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 23 May 2014 15:02:27 +0000 (15:02 +0000)]
Bug 11392: (follow-up) fix syntax error in template
In the two FOREACH loops introduced by the patch, wrap
the module and action names with quotes. This fixes a
problem where parsing the template crashes with the following
error:
Template process failed: file error - parse error - .../viewlog.tt line 83: unexpected token (RETURN)
[% FOREACH actx IN [ ADD DELETE MODIFY ISSUE RETURN CREATE ] %] at .../C4/Templates.pm line 132.
Pasi Kallinen [Fri, 9 May 2014 10:40:14 +0000 (13:40 +0300)]
Bug 11392: Allow translating the viewlog module and action names
When viewing the logs, the user can see module and action,
such as "SYSTEMPREFERENCE", "MEMBERS" or "CREATE", "MODIFY", etc.
These texts are not translatable.
This patch allows translating those. It also adds the missing "CREATE"
action to the pulldown.
To test:
1) Go browse the system logs. Note the contents of the "Action" and
"Module" -pulldowns, and the contents of those columns in the log table.
2) Apply patch
3) Go browse the system logs again. The pull-downs should work, and
show the same values as before (plus "Create" for Action), and the
Action and Module -columns in the log table should not be in ALL CAPS.
4) cd misc/translator
5) perl translate update xx-YY
6) Check that the po/xx-YY-i-staff-t-prog-v-3006000.po contains the
values for the pull-downs in it. (Look for eg. "System prefs")
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 23 May 2014 14:46:54 +0000 (14:46 +0000)]
Bug 11365: (follow-up) trim whitespace in the translate_card_element block
Trim leading and trailing whitespace in the text generated
by the translate_card_element block to avoid generating
unescaped multi-line strings, which breaks the JavaScript
To test:
[1] Test actions in the patron card creator that generate
JavaScript alerts, such as hitting the delete button
without first selecting a batch or profile.
Pasi Kallinen [Tue, 6 May 2014 08:49:39 +0000 (11:49 +0300)]
Bug 11365: make label card element title texts translatable
To test:
1) cd misc/translator
2) perl translate update xx-YY
3) check that there's no msgid that contains the patron card label
element title texts in po/xx-YY-i-staff-t-prog-v-3006000.po
4) apply patch
5) perl translate update xx-YY
6) check po/xx-YY-i-staff-t-prog-v-3006000.po that it contains the
msgid. (search for "BLOCK translate_card_element")
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Tested updating po file, translating and installing
language, checked on tools page.
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11856: Add confirm option to POD in advance_notices.pl
Also removes a commented line that changed the value of $confirm.
If it would default to 1, we do not need it at all.
I am not saying that we need it, but just documenting that we have it.
Signed-off-by: Marc Véron <veron@veron.ch>
Small change in documentation.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Wed, 30 Apr 2014 19:14:50 +0000 (21:14 +0200)]
Bug 12165: Add descriptions of charges (bug 2546) to Bootstrap Opac theme
1) Create an account with lots of different charges, fines, fees, etc.
2) Look at the accounts tab in the prog OPAC theme
3) Compare the page to bootstrap theme
4) Verify display is now the same
In my tests I found some things that could still be improved,
but for the goal is to make all OPAC themes behave the same.
Signed-off-by: Marc Véron <veron@veron.ch>
Tested by changing accounttype in table accountlines to all possible
values like Pay, Pay00, Pay01 etc. Both themes display the same values,
e.g. "Payment, thanks (cash via SIP2)" for Pay00
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 12 May 2014 08:25:38 +0000 (10:25 +0200)]
Bug 12147: Convert action links on invoices pages to a menu
Prior to this patch, the column for displaying the action links
was too narrow, leading to an ugly display. This patch groups
"action" links into a menu as was done with Bug 11763.
This patch also converts the date column sorting configuration to use
header class instead of an index.
This patch also corrects a couple of HTML markup errors: An
improperly-closed <input> and an improperly closed <option>.
To test, view the invoices page and confirm that the "Actions" menu
button works corectly. Test the functionality of each menu options:
Details, Close, Reopen, and Delete. Confirm that sorting by billing date
still works correctly.
Much nicer user interface. Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 22 May 2014 11:00:07 +0000 (13:00 +0200)]
Bug 12023: (follow-up) fix redirect to step 3
This patch fixes the redirection to step 3.
If you go on installer/install.pl and Koha is already installed,
you should be redirected to the step 3. Without this patch, the
script raised an internal error (500).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Robin Sheat [Wed, 2 Apr 2014 04:20:08 +0000 (17:20 +1300)]
Bug 12023 - move InstallAuth.pm to be in C4
InstallAuth was in the installer directory, which meant that Plack was
unable to find it, and so running the webinstaller would fail. This
moves it into C4,
Test plan:
* Make sure the web installer runs under plack
* Make sure the web installer runs under non-plack
TEST PLAN
---------
1) Set opacthemes system preference to prog
2) In OPAC, click 'Advanced search'
3) Click 'More options'
4) Check the Keywords dropdown for duplicate 'Standard number'
5) Apply patch
6) Refresh page, and make sure 'More options' is clicked still
7) Check the Keywords dropdown for duplicate 'Standard number'
-- it's not this time
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described on prog theme, no more duplicate.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jesse Maseto [Fri, 28 Mar 2014 15:02:18 +0000 (11:02 -0400)]
Bug 10936: remove duplicate 'Standard number' option in Advanced search
This patch removes the duplicate 'Standard number' option
under the more options of the OPAC advanced search correctly
following updates from Katrin.
TEST PLAN
---------
1) Set opacthemes system preference to bootstrap
2) In OPAC, click 'Advanced search'
3) Click 'More options'
4) Check the Keywords dropdown for duplicate 'Standard number'
5) Apply patch
6) Refresh page, and make sure 'More options' is clicked still
7) Check the Keywords dropdown for duplicate 'Standard number'
-- it's not this time.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Wed, 7 May 2014 15:58:45 +0000 (17:58 +0200)]
Bug 12211: fix wrong home link in bootstrap public catalog login page
In bootstrap opac-auth.tt, the link to "Home" in breadcrumbs leads
to #, it should lead to opac-main.pl like in all other pages.
Test plan :
- Use boostrap opac theme
- Go to cgi-bin/koha/opac-user.pl when not logged
=> without patch, clicking on Home does not change the page
=> with patch, clicking on Home leads to opac-main.pl
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Link ok, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
projects / koha.git / log