Robin Sheat [Fri, 30 Nov 2012 02:48:50 +0000 (15:48 +1300)]
Bug 10560: make it possible for default interface language to not be English
If you enable another translation, and disable English, then if you dont
have a cookie set, or your browser is not set to that language, you will
get English. So you can not disable English in either the staff client
or the OPAC.
This patch fixes the language selection to do the right thing.
To test you must have at least one other language installed besides
English. Apply the patch and disable the en translation. Koha should
fall back to one of the enabled translations.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I added a patch description and test plan, missing from the
original patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have tested with various combinations of activated languages
and have found no regression. If the cookie is set, the right
language is shown accordingly. Else the first language in the
list seems to be picked. It did never fall back to English
in my tests, when English was explicitly deactivated.
In parcels.pl, and other acquisition pages, the funds are not sorted
by name in combo-box. With a great number of funds, it is difficult
to find one.
This patch adds a default value to $orderby arg of C4::Budgets::GetBudgets.
Test plan :
- Create a new fund with a name beginning with 'z' and set you as owner.
- Create a new fund with a name beginning with 'a' and set you as owner.
- Go to a vendor and click "Receive shipments"
- Look at fund combobox
=> Funds are sorted by name
Signed-off-by: Silvia Simonetti <s.simonetti@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
When testing make sure your funds would sort the other way
around when sorting by code instead of description.
Katrin Fischer [Mon, 1 Jul 2013 21:44:39 +0000 (23:44 +0200)]
Bug 4907: make 'Organize by' filter in suggestions reflect selected option
When using the 'Organize by' option to change the display of the
suggestions, the option is applied, but the pull down always jumps
back to the first entry 'Status'.
This patch fixes that.
To test:
- Try out all settings and verify that after the page reloads the selected
option is applied to your suggestions and the pull down shows
the option you selected.
Note: Until bug 10519 is properly fixed the tabs will not show
the correct descriptions, but the URL will show you the selected
option as parameter: displayby=acceptedby
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 60a4dffbb197fe92e7483b9e0dfcc19bc9b51664) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 5207c513c36fb0e66ed5a8390fc30119e194fad1)
Bug 5858: Followup for INSERT IGNOREs in marc21_framework_DEFAULT.sql
Changes 8 INSERTs into INSERT IGNOREs.
This allows current installs to benefit easier from the new tags/subfields.
Note that running with --force will not achieve the same! The multi-value
inserts will still be aborted, though execution continues.
Test plan:
Run the file or do a new install.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran the file on a current install manually.
Bug 5858: update default MARC21 framework to April 2013 revision
Applies to new installs, although with the follow-up
patch, users can run the installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
script through the mysql client to add new tag and
subfield entries.
To test:
1) Delete MARC21 default framework
2) Apply patch
3) Test that new default framework loads without problem
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run this file with and without this patch.
This patch adds 24 tags (338 vs 314) and 323 subfields (3951 vs 3628).
Verified that last QA comments were incorporated.
Followup Bug 9353: Missing subfields on MARC21 frameworks
This followup changes updatedatabase.pl.
Only touch frameworks that have the missing subfields.
If both patches are applied, the test plan changes.
To test:
1) dev master system with default and example MARC21 frameworks
2) Go to Home > Administration > MARC frameworks
3) Click on 'MARC structure' of any framework
4) Search for tag 029 (or 863/4/5)
5) Click 'Subfields', there are none.
6) Apply both patches
7) run 'perl installer/data/mysql/updatedatabase.pl'
8) Repeat steps 2-4
9) Click 'Subfields', now they are.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Update works nicely. Checked various frameworks and
results were ok. Also new fields are hidden. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit da4bc6a6315a7f5aca1bb3105549758b8acd7592) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit da4bc6a6315a7f5aca1bb3105549758b8acd7592)
Solved conflict in updatedatabase.pl
This two are necessary for Bug 5858
863abcdefghijklmnopqstvwxz68 (same for 864/5)
(http://www.loc.gov/marc/holdings/hd863865.html)
To test:
1) dev master system with default and example MARC21 frameworks
2) Go to Home > Administration > MARC frameworks
3) Click on 'MARC structure' of any framework
4) Search for tag 029 (or 863/4/5)
5) Click 'Subfields', there are none.
6) Apply the patch
7) Replace old frameworks, easiest by command line:
mysql -uuser -ppass kohadb -e 'delete from biblio_framework; delete from marc_tag_structure; delete from marc_subfield_structure'
mysql -uuser -ppass kohadb < installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
mysql -uuser -ppass kohadb < installer/data/mysql/en/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
8) Repeat steps 2-4
9) Click 'Subfields', now they are.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updated frameworks are ok.
Note: Only en frameworks are updated, so if other languages need
those fields too, we need some followups. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit d0f3a49d9672cd018a51168b05db7a9d1f17f250) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit d0f3a49d9672cd018a51168b05db7a9d1f17f250)
Bug 10289: (follow-up) don't set cardnumber for test patron
Since the patron barcode is nullable, and since the tests using
the test patron don't care what the barcode is, don't set it. This
avoids the tests failing if the test database happens to already
have a patron record with the hard-coded barcode that used
to be supplied.
Jonathan Druart [Mon, 20 May 2013 14:37:10 +0000 (16:37 +0200)]
Bug 10289: UT: Reserves.t needs to create its own data
Try before the patch:
prove t/db_dependent/Reserves.t
And after, it should produce:
t/db_dependent/Reserves.t .. 1/4 #
# Creating biblio instance for testing.
# Creating item instance for testing.
# Deleting item testing instance.
# Deleting biblio testing instance.
# Deleting borrower.
t/db_dependent/Reserves.t .. ok
All tests successful.
Files=1, Tests=4, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.39 cusr 0.02 csys = 0.44 CPU)
Result: PASS
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 6e6c7608b7d9b13d3af8d2115659ef142adb1b01) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit b606e3afd2ad0a64f663bf086b1d792046a5570f) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit b606e3afd2ad0a64f663bf086b1d792046a5570f)
Bug 9519: fix code for Italian language search limiter
'ind' rather than 'ita' was set as the ISO639-2 language
code for Italian in the fr-FR, it-IT, pl-PL, ru-RU, and uk-UA
installation SQL.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I checked nb-NO and de-DE - language code there had already
been corrected.
Fridolyn SOMERS [Fri, 31 May 2013 08:17:08 +0000 (10:17 +0200)]
Bug 10384: fall back to normal authentication if LDAP server is not available
This fixes a bug where, assuming LDAP authentication is enabled, if a user
tries to log in while the LDAP server is down, the following fatal error
is displayed:
Can't call method "bind" on an undefined value at C4/Auth_with_ldap.pm line 134, <DATA> line 558.
This patch catches this error to allow normal authentication when LDAP connexion fails.
Test plan :
- Configure LDAP connexion with a host not having LDAP. ie :
<useldapserver>1</useldapserver>
<ldapserver id="ldapserver">
<hostname>localhost</hostname>
<base>dc=test,dc=com</base>
<user>cn=Manager,dc=test,dc=com</user>
<pass>passwd</pass>
<replicate>0</replicate>
<update>0</update>
<auth_by_bind>0</auth_by_bind>
<mapping>
<firstname is="givenname" ></firstname>
<surname is="sn" ></surname>
<branchcode is="branch" >MAIN</branchcode>
<userid is="uid" ></userid>
<password is="userpassword" ></password>
<email is="mail" ></email>
<categorycode is="employeetype" >PT</categorycode>
</mapping>
</ldapserver>
- Try to connect with mysql user (defined in koha-conf.xml)
- Try to connect with a user defined in borrowers
You may try to connect with working LDAP connexion
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 96ac578960cb4f2c5a964b3ac7fa4f9ba676b95d) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 85130dafc515363eba8f44973291a7af893a8b52) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 85130dafc515363eba8f44973291a7af893a8b52)
Jonathan Druart [Thu, 25 Apr 2013 07:47:53 +0000 (09:47 +0200)]
Bug 10088: FIX adding an order from a staged file.
Bug 9902 introduced an issue in the C4::Items::PrepareItemrecordDisplay
routine. The existence of $defaulvalue hashref should be tested before
getting to the branchcode key.
Test plan:
Before applying the patch, an error occurred when you try to create an
order from a staged file.
After applying the patch, the error does not appear anymore.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit f2e44716f60578b9663862d7b2ba3b16f7067143)
Kyle M Hall [Wed, 27 Mar 2013 13:18:24 +0000 (09:18 -0400)]
Bug 9902 - item subfields not populating
Test Plan:
1) Create a new serial with a default location, call number, and library
( the library will need to be any but the one you are logged in as )
2) Click the "Recieve" button for this serial
3) Click "Click to add item"
4) Note those values are not populated
5) Apply the patch
6) Reload the page
7) Click "Click to add item"
8) Note those values are now populated
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This seems to restore the former behaviour.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
signing for 3.10.x - restores former behaviour.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely. Before applying the patch callnumber,
location and branches are not carried over correctly.
After applying the patch, this works as expected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Pushed to 3.10.x
Kyle M Hall [Wed, 17 Apr 2013 13:33:55 +0000 (09:33 -0400)]
Bug 9533: batch item modification form now shows default field values only by request
This patch makes the pre-population of the fields for the batch
item editor with the default values from the default framework
optional and off by default.
Test Plan:
1) Apply patch
2) Add default values for cost and replacement cost to the
default framework.
3) Browse to Tools / Batch item modification
4) Choose a file, or entire some barcodes in the text area
5) Ensure that the 'Populate fields with default values from default
framework' is *not* checked
6) Click 'Continue'
7) Observe that the fields for cost and replacement cost are blank
8) Click the 'back' button on your browser
9) Check the checkbox to enable the default value
10) Click 'Continue'
11) Observe that the fields for cost and replacement cost now contain
the default values you assigned them in the default MARC framework
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Switch works correctly, all tests and QA script pass.
Note: there is a bug with default values for all non text input
fields. Default values won't be applied for those fields as the
pull downs are not preselected correctly with the default values
defined in the framework.
Fridolyn SOMERS [Wed, 26 Jun 2013 15:52:40 +0000 (17:52 +0200)]
Bug 9113: fix handling of certain characters by item batch modification tool
If you're using the batch modification tool and entering a call number
like "E+ 123 ABC", the tool removes the + and puts a space in its place,
e.g., "E 123 ABC"
This is because the form is posted via Ajax by background-job-progressbar.js.
Values are URI-encoded using escape(), but this method does not escape some
characters: * @ - _ + . /
Also, "+" is considered as a space in a URI.
This patch replaces escape() by encodeURIComponent() which encodes every character.
Test plan :
Perform an items batch modification by setting '* @ - _ + . /' in a field
(notes for example) and see that all characters are saved correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0397e7ea64c208c140d7178ed34c3bd4b266fcfb) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit dbd52acf2958bca6b126a35a47d03b6d4d4d541d) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit dbd52acf2958bca6b126a35a47d03b6d4d4d541d)
Marc Veron [Fri, 14 Jun 2013 14:37:23 +0000 (16:37 +0200)]
Bug 5894: Display all titles when confirming copy of items from cart to list
Adds missing code that splits biblios before calling template.
To test:
- Add some items to cart
- Open cart, select some or all items
- Add to list; with patch, following window shold show something
like "Add 3 items to a list:", followed by list of items
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Owen Leonard [Wed, 5 Jun 2013 18:03:51 +0000 (14:03 -0400)]
Bug 10346 - "Add multiple copies" should be labelled "Add multiple items"
The Koha interface standardizes on the term "item" instead of "copy," so
the "Add multiple copies" button would be more correctly labeled "Add
multiple items."
To test, view the add item screen for an existing or new record. You
should see a button labeled "Add multiple items."
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 79df5211d6faff8ab31b46c815ed50c70093a057) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 7000aa561c7fb33c422f9b60c4f7590a6071ee08)
Fridolyn SOMERS [Fri, 7 Jun 2013 08:17:54 +0000 (10:17 +0200)]
Bug 10428: undefined check in add additem.pl
In additem.pl, in the code that generates item form you find:
@values = $itemrecord->field($tag)->subfield($subtag) if ($itemrecord && defined($itemrecord->field($tag)->subfield($subtag)));
This patch adds the check of $itemrecord->field($tag) undef.
I did not found a way to test it because item tag is always defined
when editing an item, but it would be safer/prettier to add this check.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e31b158245f4eff36decebf30c8a87c8cfebe472) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 54d414ee2d16a2969c91e5a83cb8c66858fed03c) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 54d414ee2d16a2969c91e5a83cb8c66858fed03c)
Bug 10029 - CAS authentication fails in OPAC reserve
If OPAC reserve page is accessed without being logged-in, login form is displayed as well as a CAS authentication link (if enabled). A click on this link will lead to CAS server but one comming back to Koha, page shows an error : "ERROR: No biblionumber received".
This is because CAS link only contains the query path "/cgi-bin/koha/opac-reserve.pl", not the query parameters.
This patch adds query parameters to URI sent to CAS.
Test plan :
- Enable CAS
- Go to opac without been logged-in
- Try to place hold on a record
=> You get to /cgi-bin/koha/opac-reserve.pl?biblionumber=XXX showing authentication page
=> Check that CAS link contains query param "biblionumber"
- Click on CAS link and log in
=> Check you return well logged-in to reserve page with biblionumber param
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have followed the test plan as far as I could and the links
contain the biblionumber now, which they didn't before.
I couldn't check the CAS login, but my normal login worked
as expected.
All tests and the QA script pass.
Owen Leonard [Wed, 26 Jun 2013 16:54:15 +0000 (12:54 -0400)]
Bug 10510 - OPAC's renew selected link has glitchy icon
The "renew selected" link on the list of a user's checkouts looks bad
because the next icon in the sprite shows through. This patch modifies
the sprite to give it proper spacing and corrects the CSS to accommodate
the change.
To test, apply the patch, clear your browser cache, and view the
following pages to confirm that the change works:
- With TagsEnabled and TagsInputOnList enabled, view a search results
page when logged in and when not logged in. Tag links should be
styled correctly.
- With OpacBrowseResults enabled, open the detail page for any record
and click the "browse shelf" link. The "forward" and "back" arrows
should be styled correctly.
- With OpacRenewalAllowed enabled, log in to the OPAC and view your
checked out items. The "renew selected" and "renew all" links should
look correct.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: this will fix only the prog theme, but not the ccsr theme.
And it works perfectly.
Liz Rea [Thu, 9 May 2013 21:32:17 +0000 (09:32 +1200)]
Bug 6553 - Parentheses in Corporate author break tracings
To test:
If an author's name includes parentheses or other escape-characters, the tracing links
produced in the OPAC fail in XSLT mode. This patch wraps the author names
in double-quotes, providing the necessary escapement.
Test plan:
- Create a new framework, delete Thesaurus from 100 and other fields
- Create a new record in this framework (or change an existing record to this framework)
- Add 100$a - use parentheses
- Check the search links in OPAC detail pages
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
XSLT change adding quotes. Search now matches search in the intranet.
Passes all tests.
Kyle M Hall [Mon, 17 Jun 2013 16:28:13 +0000 (12:28 -0400)]
Bug 10484: serials-edit.pl not checking for barcode field before checking for barcode subfield
The script serials-edit.pl is not checking for the existence of the
barcode field before checking for barcode subfield for autoBarcode =
incremental. If the barcode field doesn't exist, the script dies with
errors.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Checked that adding items on serial receive still works.
Galen Charlton [Wed, 19 Jun 2013 15:52:56 +0000 (08:52 -0700)]
Bug 10494: remove spurious warnings from the KohaBranchName plugin
The KohaBranchName plugin now returns an empty string if
given a NULL (undefined) library code or a library code that
is not present in the database (e.g., the '__ANY__' placeholder
that purchase suggestions can use).
To test:
[1] Create a purchase suggestion, setting the library
to 'Any'. Create a second one setting the library to
a specific one.
[2] Go to the suggestions overview page in the staff interface.
When you do so, the Apache logs should contain a warning
that looks like this:
[Wed Jun 19 07:13:06 2013] [error] [client 192.168.1.10] [Wed Jun 19 07:13:06 2013] suggestion.pl: Use of uninitialized value in concatenation (.) or string at /home/koha/koha-tmpl/intranet-tmpl/prog/en/modules/suggestion/suggestion.tt line 487., referer: http://koha-staff.metaquarry/cgi-bin/koha/acqui/acqui-home.pl
[3] Apply the patch.
[4] Refresh the suggestions overview page. This time, there should be
no new warning logged.
[5] Verify that the library names for the two pending suggestions
created in step 1 are displayed correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Also adds new tests!
Note: For the test plan to work you have to add the suggestion
from the intranet, as Any is not an available option in OPAC.
do some validation of the KohaOpacRecentSearches cookie
Add validation of the value of the KohaOpacRecentSearches. In
particular, this patch avoids the generation of an internal server
error when the OPAC is presented with an old cookie that uses the
old Storable-based serialization.
This patch also moves parsing of the cookie value into a
new routine in C4::Auth, ParseSearchHistoryCookie, and adds
a test case.
To test (in conjunction with the previous patch):
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Apply this patch and the previous one.
- Do *not* clear the KohaOpacRecentSearches cookie
- Check the search history and verify that no searches
are listed any more
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
use JSON rather than Storable for the OPAC search history cookie
To test:
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- Clear the KohaOpacRecentSearches cookie
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verified that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit c6c001b8ff94f60c60de428053b107105fb589de) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit c6c001b8ff94f60c60de428053b107105fb589de)
In CCSR the opacheader preference isn't really in the header it's to the
right of the search box (see attached). I'm okay with a customizable
region over there, but we should have a new preference for that and
header should be above the search box as it implies.
To test:
1) Put something in the OpacHeader syspref. Preferably something large
and header-like for maximum effect.
2) Select CCSR theme.
3) View OPAC. Notice placement of "header" content.
4) Apply patch.
5) View OPAC. Notice placement of "header" content.
6) Sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised with one caveat; the content of
opacheader is by default underneath the div "top-bar". A couple breaks
in my OpacHeader test made it visible, so I'm going to assume this is a
styling issue and not a bug as such.
Marcel de Rooy [Mon, 3 Jun 2013 13:27:50 +0000 (15:27 +0200)]
Bug 10386: improvements to VirtualShelves.t
Most important: Does no longer delete all shelves!
Checks if there are ten borrowers for testing. But even works without them :)
When creating or modifying lists, takes name clashes into consideration.
Small change to _CheckShelfName in VirtualShelves module. Making it possible to
check a name for a list whose owner has been set to NULL. Note that a test
like field=? with undef for placeholder will not work in MySql.
Test plan:
How do you test a test? Well, you could run it on various databases..
But for real hacking, you could also add some debug lines.
I tested this by forcing 10 undefs in @borrowernumbers.
And by overwriting the return value of randomname with an existing name.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 93e87ca0b61611fc35238bf13eb226f477cf9c4e) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit a97b62379f82a94157916959109c7c1a75582d8a) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit a97b62379f82a94157916959109c7c1a75582d8a)
Jonathan Druart [Mon, 20 May 2013 14:56:38 +0000 (16:56 +0200)]
Bug 10290: UT: VirtualShelves.t needs to create its own data
Try before the patch:
prove t/db_dependent/VirtualShelves.t
And after, it should produce:
t/db_dependent/VirtualShelves.t .. ok
All tests successful.
Files=1, Tests=82, 6 wallclock secs ( 0.03 usr 0.00 sys + 0.46 cusr 0.03 csys = 0.52 CPU)
Result: PASS
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 44905ac99cee8ddca6c63752d948a74afae20194) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tests are good :-D. They look fine and work as expected.
(cherry picked from commit e918450e6ad6e661474479f8890f6b141fe4e15a) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Missed this one from previous release
(cherry picked from commit e918450e6ad6e661474479f8890f6b141fe4e15a)
Jonathan Druart [Fri, 24 May 2013 14:18:59 +0000 (16:18 +0200)]
Bug 10336: HoldsQueue.t needs to create its own data
After applying this patch and the patch submitted in bug 10495, you can
run prove t/db_dependent/HoldsQueue.t and admire that all tests pass.
This patch creates a borrower and uses Koha routines instead of directly
updating the database.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bfbc646fdd9ca4b90a0bc2751d0faa95d9e93ba1) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 509972e3858d3b3c9f915d09a1e10f77cbe105fd) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 509972e3858d3b3c9f915d09a1e10f77cbe105fd)
Galen Charlton [Wed, 19 Jun 2013 17:30:58 +0000 (10:30 -0700)]
bug 10495: set precondition for HoldsQueue test
t/db_dependent/HoldsQueue.t assumed, but did not check,
that the AutomaticItemReturns system preference was off
at the beginning of the test un. This patch makes sure
that that assumption is met.
To test:
[1] Make sure that at least one item is on loan (this is
another assumption that the test case makes, one
that should be corrected with the work proposed
for bug 10336.
[2] Turn the AutomaticItemReturn system preference on.
[3] Run the test:
prove -v t/db_dependent/HoldsQueue.t
[4] Tests 4 and 6 should fail.
[5] Apply the patch.
[6] Run the test case again; this time, all tests should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4e51ec5aae50c878bbdca6994361b12d7ba20d0a) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 20d43f6c02e2bc3fbc1a79b00b995c128a4b41ef) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 20d43f6c02e2bc3fbc1a79b00b995c128a4b41ef)
Owen Leonard [Tue, 27 Nov 2012 16:16:14 +0000 (11:16 -0500)]
Bug 7110: Renewal messages no longer displays in OPAC if OpacRenewalAllowed is disabled
Prior to this patch, if a patron has fines which exceed the limit set by
OPACFineNoRenewals but OPAC renewals are disallowed by OpacRenewalAllowed,
a message was displayed in their OPAC summary like this:
"Please note: You currently owe XXX in fines. Please pay your fines if you wish
to renew your books."
Information about outstanding fines in this case has no bearing on
how the user sees his summary of checkouts; since the user cannot
renew the loans from the OPAC regardless of their fine balance if
OpacRenewalAllowed is not enabled, this patch removes the message.
To test, try various combinations of OpacRenewalAllowed and
OPACFineNoRenewals with a patron who has outstanding fines:
- OpacRenewalAllowed ON and OPACFineNoRenewals ON (set to be triggered
by the test patron's fines): Logging in to the OPAC the patron should
see a warning on opac-user.pl about not being able to renew items
because of fines.
- OpacRenewalAllowed ON and OPACFineNoRenewals OFF (threshold high
enough not to trigger a block): No warning appears.
- OpacRenewalAllowed OFF and OPACFineNoRenewals ON: No warning appears.
- OpacRenewalAllowed OFF and OPACFineNoRenewals OFF: No warning appears.
If OpacRenewalAllowed is diabled and a patron's fines exceed the limit
set by OPACFineNoRenewals they should see no message.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-ql.pl and perlcritic
Robin Sheat [Mon, 15 Jul 2013 14:06:40 +0000 (02:06 +1200)]
Bug 10590 - parameterise the limit option
The limit option was previously substituted directly into the query. The
previous patch on bug 10590 filters it on input, but there's no reason
not to have it made to work properly in the query for added safety.
To test:
[1] Go to the top checkouts report (http://OPAC/cgi-bin/koha/opac-topissues.pl)
[2] Run the report several times, varying the filters on
number of results and item type.
[3] Verify the the list of top checkouts appears to be correct.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 89cf013a6fadcb1347151798f3fdab0d8c75cd15) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 2e77edf8dfa0350a6e20805e7fa39b97608c804e) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 2e77edf8dfa0350a6e20805e7fa39b97608c804e)
Bug 10590 - in opac-topissues limit param is not protected
In opac-topissues page, the limit URL argument is directly added to SQL query.
This patch adds protections : limit must only contain digits and must be lower than 100.
Test plan :
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=10&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=9999&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 100 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=WHERE&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 57866d6b67c3f8b29290150f21c71395315a73fe) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 5867909f8866b4e68340b88817bfb95f51bc3c9e) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 5867909f8866b4e68340b88817bfb95f51bc3c9e)
Kyle M Hall [Tue, 19 Feb 2013 13:42:11 +0000 (08:42 -0500)]
Bug 9458 - Add sorting to lists - QA Followup
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit bc9f606ca7025417f3f2fddd393983cc0beec0ba)
Jonathan Druart [Thu, 23 May 2013 14:42:38 +0000 (16:42 +0200)]
Bug 10317: improve display when order receiving page is given an invalid invoiceid
This patch fixes some things on the order receiving/parcel page.
1/ Removes dead code
2/ Displays an error message if invoiceid is unset or does not refer to an
invoice
3/ Fixes a bug in the note ("change note" and "add note" links)
Test plan:
1/ Try to call the invoice page with an existing invoiceid and check
that order results are consistent.
2/ Try without invoiceid or a bad invoiceid and check that an error
message is displayed.
3/ Add and change notes.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely for all tests done.
- parcel.pl with invalid invoicenumber gives a nice error message
- parcel.pl with a valid invoicenumber looks normal
- changing and editing order notes works well
Katrin Fischer [Sun, 16 Jun 2013 07:09:33 +0000 (09:09 +0200)]
Bug 10474: Translate some English strings in German sample notices
This translates 2 strings missed doing the initial translation in
ISSUESLIP.
To test:
- Run the web installer in German.
Altnernatively:
- Truncate your letters table and run the SQL against the database.
Check that the notices were added correctly, especially ISSUESLIP.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit aecb163f69b238314bbd67215ce2d8950aeab060) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 32de75b948944debe41380293c58cfe02bcbcc2d) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 32de75b948944debe41380293c58cfe02bcbcc2d)
Magnus Enger [Tue, 25 Jun 2013 06:39:23 +0000 (08:39 +0200)]
Bug 10379 - Followup: add koha-rebuild-zebra -q to the man page
The first patch on this bug forgot to add the new -q option to
koha-rebuild-zebra to the man page for that command. This patch
fixes it.
To test, run something like these commands:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-rebuild-zebra.xml
$ man -l koha-rebuild-zebra.8
This should display the man page. (Remember to remove koha-rebuild-zebra.8
when you are done :-)
$ prove xt/verify-debian-docbook.t
All tests should pass.
Robin Sheat [Thu, 30 May 2013 04:12:13 +0000 (16:12 +1200)]
Bug 10379: silence zebra rebuild cron when no instances are enabled
This adds a -q option to koha-rebuild-zebra that prevents it outputting
help if no instances are provided on the command line. This means that
if you've just installed the package, you won't get messages from cron
telling you how to use the script.
Test plan:
* install koha-common 3.12 or master onto a system with no enabled
instances.
* note that you or the sysadmin will start getting emails every 5
minutes.
* replace /etc/cron.d/koha-common and /usr/sbin/koha-rebuild-zebra with
the versions from this patch.
* note that the emails stop flowing.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
"sudo koha-rebuild-zebra -q" gives no output, as expected.
Followed the test plan, all looks good. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit c31e553a72d40bf0b1c099284ecbb4b95833e186) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit cc9b3522b192b8510a4846cd7a4b3aca3e8a0a07) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit cc9b3522b192b8510a4846cd7a4b3aca3e8a0a07)
Bug 9826 - Missing fields in MARC21 authority framework
This patch updates MARC21 authority framework adding
missing tags/subtags up to Update No. 15 (September 2012)
Missing tags and corresponding subtags only added to
default authority framework.
For present authtypes only missing subtags are added.
Also updates a few legends to match those from LOC.
No deletions except for a few not relevant tags in
present authtypes without subfields.
Only to new installs.
To test:
1) Delete present authority frameworks
2) Load new frameworks. On default there are
many new tags/subtags. On present authtypes
only a few new/renamed subtags.
Kyle M Hall [Tue, 19 Feb 2013 16:41:59 +0000 (11:41 -0500)]
Bug 9541: make OPAC login page respect OPAC_CSS_OVERRIDE
When clicking the login link for opac-user.pl in a multiple branch
scenario the environment variable for OPAC_CSS_OVERRIDE was ignored from
the koha-conf.xml file. It seems like is is working on every page in
the opac except for the login page.
Test Plan:
1) Set up a Koha server with 2 separate catalog configurations
( e.g. opac1.kohatest, opac2.kohatest )
2) Set the OPAC_CSS_OVERRIDE directive for separate css files
in each opac
3) Browse to the opac login page, note the css is not applied
4) Apply this patch
5) Reload the page, note the css is now applied
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 71b79d59908cd85130afd8600eff0f93fc79b8a9) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 69a8048eeecacff99b64fa722fa8850891476031)
Jonathan Druart [Mon, 10 Jun 2013 12:05:32 +0000 (14:05 +0200)]
Bug 10439: fix bug preventing the library for a notice from being changed
2 javascript functions should be apply only in a specific case, not for all
views.
Test plan:
- Switch on the IndependentBranches pref and log
in as a superlibrarian.
- Try to change the library for a notice. Before the patch,
no change is applied.
- Try to create a new notice, changing the library from
default in the process. Before the patch, the notice
is not created.
The bug can also be reproduced when IndependentBranches is
off, in which case the staff user need not be a superlibrarian.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 77a5e3e365a50b02c9f224d731e05de90fc667c9) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan works as advertised.
(cherry picked from commit a2e89edf43b2946da0986a5c83b04a60dea04061)
Bug 10464: Patron search on placing a hold now supports autocomplete
The patron search box for placing a hold request on a bib in the
staff interface now supports autocomplete if the CircAutocompl
system preference is enabled.
This patch grabs the autocomplete handling javascript stuff from patron-search-box.inc
and puts an adjusted version on reserve/request.tt. It sets form and input
IDs to match those configured in the autocomplete call, adjusted where needed to
avoid name collisions with the patron-search-box.inc that is present everywhere.
This patch also doubles the width of the patron search input field.
To test:
- On a biblio record, go to the Holds tab, mine looks like
/cgi-bin/koha/reserve/request.pl?biblionumber=2
- A search box is shown for patron searching.
- Search for a patron: it works as usual.
- Make sure CircAutocompl is "Don't try"
- Apply the patch
- Click the Holds tab again, and do the same search: functionality should remain intact.
- Change CircAutocompl to "Try"
- Click the Holds tab again
- Autocomplete should show you the possible options, and once you choose one result,
it should work as usual.
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Adding a nice new autocomplete feature.
Colin Campbell [Thu, 30 May 2013 17:23:55 +0000 (18:23 +0100)]
Bug 766: remove CGI::scrolling_list from request.pl
Let the template take care of generating the display.
Lets at least part of request.pl be more succinct.
To test, place a hold and search for the patron using a partial name.
You should get a dropdown select list of patrons and be able to select
the patron to hold for from there.
The functionality should remain unimpaired after this patch is applied.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7668e19c9593da570cffb5cd4640fe175d739328) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit b88f16a4e99d533753e3d707239e94da019ce303) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit b88f16a4e99d533753e3d707239e94da019ce303)
David Cook [Fri, 14 Jun 2013 03:03:19 +0000 (13:03 +1000)]
Bug 10466: fix glitch in OPAC display of titles saved to list
When displaying (in the OPAC) the set of records saved to a list,
an apparently random number (typically 33 or 34) is sometimes
displayed at the end of the publication description. In particular,
this can occur when XSLT is *not* being used to display search results;
this patch corrects the problem.
Now for the technical details:
This patch checks to see if "size" is undefined. If it is, we add a
blank (i.e. "") value to it in place of undef.
If we do not do this, calling "itemloo.size" will return the size
of the "itemloo" hash, rather than the value for the "size" key.
This is because "size" is a virtual method in Template Toolkit. It's
uncertain why the value is retrieved for the "size" key when there is
a defined value and why TT doesn't use the method instead, and that
it uses "size" as a method only if there is either no "size" key or
if the value tied to the "size" key is null/undef. This might be a
feature or it might be a bug in TT...
In the meantime, we will check to see if it's undefined. If it is,
we'll give it a value.
This bug has been identified in the opac-search.pl, search.pl and
addbooks.pl pages before. To address it, we're currently checking
if there is a "size" key, and if not...we're adding one with a blank
value.
This patch takes up that same idea, although I think it might be better
to rename the variable before passing it to TT in case the behaviour
of TT changes in the future in regards to how it handles virtual
methods.
N.B. Obviously, this only affects users not using XSLTs.
--
Test Plan:
Before applying the patch:
0) Make sure you have opac search result XSLT turned off
1) Find bib records that do not have a 300$c (Dimensions) value.
2) Find bib records that do have a 300$c (Dimensions) value.
(N.B. These values should be stored in the `size` column of biblioitems).
3) Add items from both sets of records to a List
4) Note that records without a 300$c will display a number at the end
of the "Publication" description/string. It should be something like
33 or 34 in most cases.
5) Note that records with a 300$c don't display this number. They just
show the value from 300$c.
Apply the patch.
6) Clear your cache, refresh the page, etc.
7) Note that the number (e.g. 33 or 34) has disappeared from the end
of the "Publication" description/string.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a small comment at the end of this one line.
Fridolyn SOMERS [Thu, 6 Jun 2013 08:57:29 +0000 (10:57 +0200)]
Bug 10425 - Help page missing for Local Use preferences
When viewing Local Use system preferences tab, the help button will lead to an error page.
This is because Local Use tab uses not the same script has other tabs : systempreferences.pl.
This patch adds help/systemprefences.tt
Test plan :
- Go to Local Use preferences : /cgi-bin/koha/admin/systempreferences.pl
- Click on Help link (at right top)
- See you get the same page as other preferences tab help
Marcel de Rooy [Thu, 13 Jun 2013 08:20:27 +0000 (10:20 +0200)]
Bug 10458: Remove obsolete Z3950 module and test
Are not used. Contain several FIXMEs.
Removing them makes life easier.
Test plan:
Actually, you cannot test this.
But for confidence: do a Z3950 search in cataloguing and acquisition.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 63ba05183e627bbe7278b9064d22e93d39b65461) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 1dbd1d938aabb72021cd8157e111d3f7555fff9d) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 1dbd1d938aabb72021cd8157e111d3f7555fff9d)
Bug 10443 - Table borrower_files does not exists in kohastructure.sql file
As a consequence, the borrower_files table would not exist
in Koha databases that were installed starting at 3.10.0
or later.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2e86612a15c228357223beaf996f4b3350334b2e) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e9bd7d6064ec31ab1b6307db04e0cc6656038d46) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit e9bd7d6064ec31ab1b6307db04e0cc6656038d46)
Owen Leonard [Mon, 10 Jun 2013 15:14:41 +0000 (11:14 -0400)]
Bug 10297 - categorycode and branchcode should be required when adding patrons
categorycode and branchcode should show as required under all
circumstances, not just when they are included in the
BorrowerMandatoryField system preference. This patch adds the correct
classes and hints to those fields.
To test, view the patron entry form for a new or existing patron.
Category and Library should show that they are required.
Galen Charlton [Wed, 9 Jan 2013 01:32:47 +0000 (17:32 -0800)]
bug 9370: improve splitting of LC call numbers for labels
Use the Perl module Library::CallNumber::LC to parse and split
LC call numbers when generating spine labels.
For example, QH541.15.C6 C25 2012 should be split as follows:
QH
541.15
.C6
C25
2012
To test, create an item with call number QH541.15.C6 C25 2012
and classification source LC, then create a spine label for that
item using a layout of type 'biblio' that has the split call numbers
option enabled. The call number should be split as indicated above.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit edb8bddff074769a95744b6a7fa59eff61e0cfc1) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 10f5822daabf34ede50b2b35b5e02324482af9ac) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 10f5822daabf34ede50b2b35b5e02324482af9ac)
Galen Charlton [Fri, 17 Aug 2012 15:49:45 +0000 (11:49 -0400)]
bug 6281: add Library::CallNumber::LC as a required Perl dependency
This module is currently packaged by Debian for Wheezy and by
Ubuntu for Precise and Quantal.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit f1c45784dc5dfa431ef68e5d38a14b6fb93c904d) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e4faf296c98f70f44ee67d2354a7cf5c682b27c8)
Solved minor Conflicts:
C4/Installer/PerlDependencies.pm
Galen Charlton [Fri, 17 Aug 2012 15:23:47 +0000 (11:23 -0400)]
bug 6281: introduce LC::CallNumber::LC for sorting LC call numbers
This replaces the previous hand-coded normalizer. Because
LC::CallNumber::LC appears to reject strings that aren't valid
LC call numbers, significant changes to the test cases were
made as well -- however, the one that really counts is the
last one which verifies the sorting.
To recalculate the call number sort key for each item, it is necessary
to run misc/maintenance/touch_all_items.pl
To test, create item records with the following call numbers, setting
the classification sort to 'lcc':
Kyle M Hall [Wed, 22 May 2013 13:52:40 +0000 (09:52 -0400)]
Bug 10311 - Holds queue ignores item-level holds where only one items exists
If a record has only one item, and that item has one item-level hold on
it, that hold will not show in the holds queue.
Test Plan:
1) Create 1 record with 1 item at BranchA
2) Create an item-level hold for that item, for pickup at BranchA by a
patron of BranchA
3) Run build_holds_queue.pl
4) View the holds queue for BranchA
5) Note the hold is not in there
6) Apply this patch
7) Re-run build_holds_queue.pl
8) View the holds queue again
9) Not that the hold is now there
Signed-off-by: George Williams <georgew@latahlibrary.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit acd4b21c91f4b06a6e19cafb4b9a6dd2817ad8e9) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c500fbb9e2fe292adbd4c33f8a6071bd7aa5b0fd) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked fromc500fbb9e2fe292adbd4c33f8a6071bd7aa5b0fd)
Jonathan Druart [Tue, 21 May 2013 12:54:36 +0000 (14:54 +0200)]
Bug 10296: UT: t/data/db_schemas not needed
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
These were added with the intention of writing some
schema verification test cases, but if that idea
gets picked up again in the future, fresher copies
of kohastructure.sql can be obtained from Git.
Jesse Weaver [Mon, 3 Jun 2013 19:22:57 +0000 (13:22 -0600)]
Bug 9300 - filtering Export (MARC) data by accession date does not work
Small typo in query construction, fixed.
To test:
1) Try filtering a MARC export using "Start date"
2) Notice the lack of filtering
3) Apply patch
4) Try export again, records are filtered by dateaccessioned
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5cf5da12ef8667513d2f6fb494c6997cbe82899b) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 68a893fe11cc6fa8e8a2a372180a3fd2ad722d18) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 68a893fe11cc6fa8e8a2a372180a3fd2ad722d18)
Katrin Fischer [Sun, 19 May 2013 08:56:01 +0000 (10:56 +0200)]
Bug 10249: Fix untranslatable strings in OPAC detail page
Star ratings feature:
- Your CGI session cookie is not current. Please refresh
the page and try again.
- average rating:
- your rating:
Browse results feature:
- Click to rewind the list to
- See biblio
- with biblionumber
- by (between title and author)
- Click to forward the list to
- Go to detail
To test:
- Update the po file using 'perl translate update <langcode>'
- Translate all new strings, maybe mark them with XX to make it easier
to find them
- Install the updated translation file using 'perl translate install
<langcode>'
- Test the ratings and browse results features in the OPAC detail page
- Verify everything is still working/displaying like it should
- Check that you don't find any unstranslated strings/terms
Some hints where the changes are:
- Change an existing rating - the average and your rating will change
- Browse result list and check mouse over tooltips for all links
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Strings are now translated, and no emergent JS errors have revealed
themselves.
Owen Leonard [Tue, 9 Apr 2013 19:11:22 +0000 (15:11 -0400)]
Bug 10015 - UniqueItemFields could have link to database documentation
Other system preferences which require entry of database column names
include a link to the scheme for reference. The UniqueItemFields should
do the same. This patch rewords the preference description to
incorporate a link.
To test, open the acquisitions tab in system preferences and confirm
that the UniqueItemFields description looks correct and links to the
right page in the schema.
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 336301e63a919d90d4205f3f537130b7d69b0448) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Usefull and trivial string patch.
(cherry picked from commit 910bfa1d1f3823d418d4024be082bd5a1da43a65)
Owen Leonard [Thu, 16 May 2013 12:50:23 +0000 (08:50 -0400)]
Bug 10166 [3.10.x] Can't place holds on multiple titles if one or more are un-holdable
opac-reserve.pl tries to check whether all selected titles in a
multiple-hold batch are unavailable to be placed on hold. However, the
logic is flawed in such a way that if the last item in the batch cannot
be placed on hold the script assumes none can be placed on hold.
This patch modifies the way the script tracks the "no titles available
for holds" variable in order to correct the error.
To test, place multiple holds by selecting titles from a list of search
results. Test three conditions:
- All titles are available to be placed on hold
You should see no onscreen warnings, and all titles should be
selectable on the place hold screen. A "Place hold" button should
appear at the bottom.
- Some titles can be placed on hold, some cannot
The titles which can be placed on hold should be selectable.
Titles which cannot be placed on hold should show a warning
message. A "Place hold" button should appear at the bottom.
- No titles can be placed on hold
"Sorry, none of these items can be placed on hold." should appear at
the top of the page. All titles should appear with warning messages.
There should be no "Place hold" button.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 10259 - koha-*-zebra scripts are expected to run without warnings if no instance name passed
Commented out the code that checks for intance name parameters on the zebra service handling scripts.
It restores the original behaviour, while leaving error checking code.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit f937d41dbfb5440a0451fbc9cf648339f1566bd3)
Bug 10094 - koha-list should have a --disabled option switch
This patch adds that (--disabled) option switch, Also revisits some of the code and docs.
To test:
- Apply the patch and create new packages (you might just drop the koha-list command somewhere)
- Create several instances (koha-create)
- Randomly set some as disabled, others enabled and enable email on some.
- Test all possible option switches combinations
Expected results:
- koha-list should abort with a proper message if mutually exclusive options selected (--email vs. --noemail, --enabled vs. --disabled)
- koha-list should show the exact instances you asked for
Regards
To+
P.S.: I wanted to add the --disabled option switch for the tab-completion work I'm doing, but as of bug 4876 I thought it would be ok to revisit the script to make it robust and clear.
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Does what it says, and cleans up the script at the same time. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit de275ec128d3b26e953c35778e6a37e5b85273f5)
koha-stop-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit: Corrected the die message
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit 898e178c6ff3a79bf991defb60aec8ff58f107c6)
koha-email-enable now
- Checks the instance exists.
- Checks if email is already enabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit 1126dd8bf3e3f386acfc007bc6e3310cc5320100)
This patch makes koha-rebuild-zebra:
- Check for the existence of the instance
- Handle arbitrary amount of instance parameters
- Capture -a and -b (which made the script rebuild twice the chosen DB). It adds the extended version (--authorities and --biblios respectively) of the option switch. This makes the -a and -b switches work as "only do authorities" (or viceversa). They can be used concurrently, which is the default behaviour when no switch is provided.
- Handle -v (and --verbose) as koha-rebuild-zebra options, to ease the use for non-techie users.
- The rebuild_zebra.pl is wrapped inside an IF to return error values if we ever make rebuild_zebra.pl return error codes (this is pointed in the code).
- Added -h/--help switches and an 'usage' output :-D Please provide patches for any wording issues, or contact me to fix it.
To test:
- Apply the patch and create your packages (or just use the script from your branch)
- Run it in this scenarios / options
- -h/--help to see the available option switches
- Mix them with one or more instances, of which some could be fake
- try -a/--authorities and -b/--biblios in all possible combinations
- try -v/--verbose works
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit 39d3b9088a34b464708e40d1fd20a954d4a6e702)
Frédéric Demians [Tue, 14 May 2013 11:01:56 +0000 (13:01 +0200)]
Bug 10214 Add header to syspref po files
With this patch, header is created when creating a new syspref .po file
for a new language (translate create), and is added if it doesn't
already exist when updating an existing language (translate update).
To test:
(1) Create a new language syspref file:
./translate create -p xx-XX
Check that there is an header
(2) Update an existing syspref file without header:
./translate update fr-FR
Check that fr-FR-pref.po has a header
(3) Update an existing syspref file with header:
Modify fr-FR-pref.po. Add an email, or whatever.
./translate update fr-FR
Check that fr-FR-pref.po has a header with the manual modification
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also tested that updated pref files can still be installed correctly. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit 9ce862e451f56fdca7d368fd1a39e64e40fc678f)
Owen Leonard [Fri, 31 May 2013 15:36:02 +0000 (11:36 -0400)]
Bug 10350 - Capitalization: Home Library column in staff detail items table
"Home library" is incorrectly capitalized on the catalog detail page.
This patch corrects it.
To test, view the normal view of record in the staff client catalog.
The "Home library" table header in the holdings table should be
correctly capitalized.
Janusz Kaczmarek [Fri, 24 May 2013 11:21:36 +0000 (14:21 +0300)]
Bug 10326: bulkmarcimport.pl doesn't restore value of CataloguingLog syspref
To test:
0) Don't apply the patch yet.
1) Have the CataloguingLog system preference set to 'Log'.
2) Import a file of bibliographic records with bulkmarcimport.pl.
3) Check the state of CataloguingLog system preference -- it will be
set to 'Don't log'.
4) Apply the patch.
5) Repeat steps 1-3. The CataloguingLog system preference
will be 'Log'.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9d0284096708a65954c7e35a093cfdb727a6bb84) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 658071008320fdaad425e49e79bd240dc817d7e5) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 658071008320fdaad425e49e79bd240dc817d7e5)
Marcel de Rooy [Wed, 22 May 2013 13:01:07 +0000 (15:01 +0200)]
Bug 10381: Followup adding some text around Apply/cancel filter.
The texts Apply/cancel filter did not need translation and were used to get
this change into 3.12.
For 3.12.X or 3.14 we can add some words to clarify its meaning.
With thanks to Owen for some rewording.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 600eff7827be1c396e7ea13cd7c7159003d6c794) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8fc93e7abced06ae5adce80e123e061aea46950a)
Marcel de Rooy [Wed, 22 May 2013 12:51:00 +0000 (14:51 +0200)]
Bug 10381: POD lines of GetBasketsInfosByBookseller
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5bf996f68d2279ae9582b338b3d094ad20f7596c) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 1530cee8a50006bbaa013676917086175401968c)
Katrin Fischer [Fri, 17 May 2013 19:12:05 +0000 (21:12 +0200)]
Bug 9824: Make it possible to apply/cancel switch
Using another existing string 'Apply filter' we are now
able to cancel the filter... and apply it... and cancel it
again... and so on.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit 7acdcb7e2aedf2ff202c009ce053de6dff54e840)
projects / koha.git / log