Nick Clemens [Fri, 26 Oct 2018 17:09:18 +0000 (17:09 +0000)]
Bug 21639: DBRev 18.05.05.003
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 22d817ddc863354b0a6316c6ddb91e2cc86cf603) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 25 Oct 2018 15:00:35 +0000 (12:00 -0300)]
Bug 21639: (follow-up) Adjust the other languages
uk-UA was wrong.
We should use the same file for all languages
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit f106c3a13aa0ee69d744c683e99d9d6ec3c10ffa) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Wed, 24 Oct 2018 19:43:18 +0000 (19:43 +0000)]
Bug 21639: Adjust the other languages
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 7c25be79a00b6b7b8b2f4b38eb2dd9f3f6cb502e) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Wed, 24 Oct 2018 01:33:42 +0000 (01:33 +0000)]
Bug 21639: Add phone transports to new and existing installs
To test:
1 - Confirm if you do or do not have 'phone' transports defined in the
message_transports table
2 - Apply patch
3 - Run updatedatabase
4 - If you didn't have them you should now
5 - Run updatedatabase again, confirm it doesn't error
6 - sudo koha-mysql kohadev
7 - DELETE from message_transports WHERE message_transport_type =
'phone'
8 - Run updatedatabase again
9 - Confirm the message transports table is restored
10 - Drop your DB (or reset_all in kohadevbox)
11 - Ensure the table is fully populated including phone notices
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 71fdba0ff014017287ca7b1f524850fadad81af1) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Victor Grousset [Thu, 18 Oct 2018 09:54:58 +0000 (11:54 +0200)]
Bug 21587: don't drop patrons to notify in order creation
It only worked on modification.
== Test plan ==
1. have/create a active budget
2. have/create a fund
3. have/create a vendor with minimal info
4. create a basket with minimal info
5. add an order line to the basket
Add a user in "To notify on receiving"
6. Modify the order
7. The patrons isn't here. This is the bug
8. Add a user in "To notify on receiving"
9. Save
10. Modify the order
11. The patron is here now
12. Apply this patch
13. Retry step 5 to 11 and patron should be saved on order creation
14. Celebrate! :D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit bf8b4e773c089a4094b18c62af91711b8af99f82) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 18 Oct 2018 21:00:15 +0000 (18:00 -0300)]
Bug 21603: Remove incorrect GROUP BY from C4::CourseReserves
'koha_kohadev.c.department' isn't in GROUP BY
Test plan:
Prove that the test fail without this patch and pass with this patch
applied (switch on the SQL modes)
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 41397c855397aee9847943c2f124e0bdc8ba7eb7) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Add public and privates shelves
- Shares some of them
- List them
=> The correct numbers of shelves must be displayed
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b106ddb96b21a78559d7a60057e94024e7db4a16) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 23 Oct 2018 13:35:24 +0000 (10:35 -0300)]
Bug 21635: [sql_modes] Remove GROUP BY clause in batchMod.pl
batchMod.pl: DBD::mysql::st execute failed: 'koha_kohadev.authorised_values.authorised_val
ue' isn't in GROUP BY [for Statement "SELECT authorised_value, lib FROM authorised_values LEFT JOIN authorised_values_branches ON ( id = av_id ) WHERE category = ? AND ( branchcode = ? OR branchcode IS NULL )
GROUP BY lib ORDER BY lib, lib_opac" with ParamValues: 0='WITHDRAWN', 1="CPL"] at /home/vagrant/kohaclone/tools/batchMod.pl line 396.
We must use Koha::AuthorisedValues->search instead of a raw SQL query.
Test plan:
Edit some items in a batch
Confirm that the dropdown list (AV) are correctly filled
We will lose speed efficiency here, but better to be consistent, then cache AV in Koha::AuthorisedValues
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit dab4426457578094eb5aac6531d1a1db631d05c7) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Fri, 26 Oct 2018 16:25:02 +0000 (16:25 +0000)]
Bug 7143: Update about page for new devs Margaret Hade and Isobel Graham
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit d71fb84f6fb40f7eb59a9f86f1a07d57f58f3c0a) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Isobel Graham [Sat, 20 Oct 2018 08:12:19 +0000 (09:12 +0100)]
Bug 20758: Fix for BrowseResultSelection typo
To test:
1) The BrowseResultSelection description should no longer contain
"fromt"
Mentored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit d8edb017e4107802e55b5887a1454651565a2e49) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 9 Oct 2018 18:05:04 +0000 (18:05 +0000)]
Bug 21505: Box around 'Additional fields' does not contain the fields
This patch modifies the subscription detail page markup to eliminate a
confusing bordered <legend> tag. It is replaced with an <hr> to
delineate the sections and an <h3> tag to serve as the heading.
To test, apply the patch and regenerate the staff client CSS.
- Configure one or more additional subscription fields.
- View the detail page for a subscription and confirm that the
"Additional fields" section is clearly labeled.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 311fe87b31b9a65974e6020df301408251659e79) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Sun, 21 Oct 2018 02:34:25 +0000 (02:34 +0000)]
Bug 21625: Fix wording and typo in SMSSendDriver system preference description
SMSSendDriver was missing an S.
Koha is sending not receiving messages, so I think switching
that will be a little more clear.
To test:
Verify that the system preference description reads correctly.
Signed-off-by: Andreas Roussos <arouss1980@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 9d0fc26c4335fc9be7a01e3069c458e9397fc94f) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 17 Oct 2018 15:32:11 +0000 (12:32 -0300)]
Bug 21486: Only fetch the items' barcodes
and avoid unecessary processing
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Tested and found correct AU data is returned, and passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 87c2b4644745b0333fc8211ce89899784dfa6a5e) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 12 Oct 2018 15:47:04 +0000 (12:47 -0300)]
Bug 21486: Fix 'AU' for SIP
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 8746ca21a271daf78cb6f4b5062323885e538801) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Wed, 10 Oct 2018 12:10:45 +0000 (12:10 +0000)]
Bug 21531: Subscription "New fields" button should read "New field"
This patch changes the label of the "New fields" button on the
subscription add fields page to read "New field," making it consistent
with similar buttons in the staff client.
Also changed:
- Add missing id to <select> to make label clickable.
- Remove custom DataTables configuration in favor of defaults.
To test, apply the patch and go to Serials -> Add subscription fields.
- The button in the toolbar should read "New field."
- The DataTables' functionality of the table of existing custom fields
should be correct.
- Click the "New field" button.
- Cliking the "Authorised value category" label should put the focus
on the dropdown.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit bba0044e8ed4cf541d38781950773c1416422b0c) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21590: change virtual shelf to list in send list email.
To test
1) Choose a public list from the 'lists' menu in the OPAC.
2) Click 'Send list'
3) Log in as necessary
4) Fill in your own email address
5) Click 'send'
6) Check your email, the sent email will contain the text
"sent you from our online catalog, the virtual shelf called".
Apply patch, re-test. The email will now contain
"sent you from our online catalog, the list called".
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 7c7300b2d93124f2158cc96c4b463f6fb08c3f04) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Mark Tompsett [Wed, 17 Oct 2018 01:39:41 +0000 (01:39 +0000)]
Bug 21005: Address QA tool failures on tabs
Only whitespace changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b2070ef98b74908860556872cc08c0b2ce74b8b1) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Cook [Fri, 10 Aug 2018 08:08:13 +0000 (18:08 +1000)]
Bug 21005: Missing row/column defaults cause unexpected results in report wizards
Some report wizards are missing row/column defaults, which sometimes return blank
pages (borrowers_stats.pl) or results always equalling 0, which a non-discerning
user may interpret incorrectly.
If the DEBUG environmental variable is enabled, missing row/column choices will
actually cause fatal software errors as well, which is also undesirable for users.
This patch adds default choices for row and column on
report wizards that had no radio buttons selected, so that a user
can't submit the form without choosing a row and column. This
prevents errors.
To test:
1) Apply patch
2) Visit /cgi-bin/koha/reports/issues_avg_stats.pl
3) Visit /cgi-bin/koha/reports/borrowers_stats.pl
4) Visit /cgi-bin/koha/reports/catalogue_stats.pl
5) Visit /cgi-bin/koha/reports/issues_stats.pl
6) Observe that default choices for row/column are there
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 6a451360b8fd0a56dd07be050cdecf538d890612) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Mark Tompsett [Tue, 17 Apr 2018 23:59:58 +0000 (23:59 +0000)]
Bug 20592: Return early in ModItem if nothing to update
Two lines of code and move them earlier.
Add a check to make sure there are changes.
Followed the test plan, both the _BEFORE_ and after do as described.
Signed-off-by: Cori Lynn Arnold <carnold@dgiinc.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 1f0064bbddb9d00529d5eac1c096e669732eb551) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 24 Apr 2018 18:53:02 +0000 (15:53 -0300)]
Bug 20592: Add tests
NOTE: It isn't really a test, but it does trigger
the return line which was added to ModItem.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 619eca1c7aaebf4db6ed170a3cbd14065da79c9d) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit bbd4f5821a9818074d07ade086e7881dc1bba195) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Fri, 19 Oct 2018 16:50:40 +0000 (16:50 +0000)]
Bug 21617: DBRev 18.05.05.002
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 8150058b387b39469b64853a07d512bcc0a3741d) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Marcel de Rooy [Fri, 19 Oct 2018 08:51:05 +0000 (10:51 +0200)]
Bug 21617: statistics.ccode is not long enough (see also DBRev 18.05.04.001)
Warn from a test:
DBD::mysql::st execute failed: Data too long for column 'ccode' at row 1 [for Statement "INSERT INTO statistics
(datetime,
branch, type, value,
other, itemnumber, itemtype, location,
borrowernumber, proccode, ccode)
VALUES (now(),?,?,?,?,?,?,?,?,?,?)" with ParamValues: 0="z8LIyIV", 1='issue', 2=undef, 3='', 4='2584', 5='E_QkzaV5Ay', 6='oDnFRZyog2CS2_XoUB_MB2sBxyI3elbFPC_AekxLPrduGTXKnlNoLKEdQrXzpAw5zD1pGbZshV9ydZup', 7='2000005168', 8='', 9='j9ZDn74omZAoZrTOdC4a05SpWRSHPR2apfss7y5V6QJuQnBEk32XWXCfMp7'] at C4/Stats.pm line 138.
The dbrev 18.05.04.001 did not change it from 10 to 80 as in other tables.
We should either truncate to 10 chars in Stats.pm or increase to varchar(80). Since it is varchar and not char, we should not be afraid about size. I choose for the latter here.
Test plan:
Run db rev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit ad20a30a831c5f3482f2eed80cc36269ebbef05f) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Fri, 5 Oct 2018 12:50:26 +0000 (12:50 +0000)]
Bug 21497: Correctly format dates for ILL requests in OPAC
This patch updates the opac ILL template to use the $KohaDates plugin
for displaying dates. Also updated:
- Added "title-string" sorting to allow for correct sorting of dates in
the table of requests.
- Corrected capitalization as per our capitalization rules.
- Added self-closing / to inputs as per coding guidelines.
To test, apply the patch and log in to the OPAC as a user who has
multiple outstanding ILL requests.
- In the table of ILL requests, the "Request placed" and "Last updated"
dates should be formatted according to your system's dateformat
preference.
- Sorting of those columns should work correctly.
- View a request and confirm that "Request placed" and "Last updated"
dates in this view are also formatted correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit a2418f743ce1e14d32229b5dd8d05aeb13f9e664) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 18959: Skip xt/author/Text_CSV_Various.t if Text::CSV::Unicode missing
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit ca9a1b76d8d729b1c09dbedbd90bd3f748351c4b) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 18959: Text::CSV::Unicode missing from dependencies
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit eb3f78f82e8139739a17c11cc89f58865d7536b0) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 18 Oct 2018 19:36:45 +0000 (16:36 -0300)]
Bug 21600: Use str param instead of dt for output_pref
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 5b9cb7086e74e9a6ea7a4eaac7c5053b6727bb3e) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21600: /patrons should have timestamp/datetime values converted from rfc3339 into valid MySQL values
Bug 21597 enabled the option so set strict SQL modes in koha-conf.xml to
be able to improve Koha's comformance to current standards on DB
engines.
This causes lots of parts of Koha to fail because they rely on MySQL
fallbacks that are no longer default behaviours.
While we can workaround this by setting SQL modes on runtime, the
decision has been that this needs fixing.
This patch deals with the /patrons API failing to correctly convert
datetimes into valid SQL timestamps.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons.t
=> SUCCESS: Tests pass
- Add <strict_sql_modes>1</strict_sql_modes> on your koha-conf.xml
$ sudo vim /etc/koha/sites/kohadev/koha-conf.xml
- Restart memcached and Plack:
$ restart_all
- Run:
k$ prove t/db_dependent/api/v1/patrons.t
=> FAIL: Tests fail due to updated_on and/or lastseen fields wrong
format (MySQL error)
- Apply this patch
- Run:
k$ prove t/db_dependent/api/v1/patrons.t
=> SUCCESS: Tests pass! It all makes sense!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 13b8e95f218924cc1ec41e2570791980bd7bcf17) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 12 Oct 2018 14:27:27 +0000 (11:27 -0300)]
Bug 21554: Add missing use statement in subscription-batchedit
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit f0373fbdec152c9d766eb82d6af667d1da5cf042) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 18 Oct 2018 14:07:02 +0000 (11:07 -0300)]
Bug 20521: Use a specific config for strict sql modes
To avoid disrupting testers and new developers it will be turned off by default.
We will turn it on for Jenkins so devs will have to take care of the
regressions they introduce (!)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 17e5691daaa0f6b73623198eded648c78e40056a) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 17 Oct 2018 23:24:09 +0000 (20:24 -0300)]
Bug 21597: Incorrect decimal value: 't_value_bib639' for column 'price'
Fix t/db_dependent/selenium/basic_workflow.t
We want to send specific values depending on the data type in DB
For instance integer, or varchar(10)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b7da4f890b9d9a7b2a919ce8529198ab443115cd) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
DBIx::Class::Storage::DBI::_dbh_execute(): Incorrect date value: '0' for
column 'onloan' at row 1 at /home/vagrant/kohaclone/t/lib/TestBuilder.pm
line 288
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 489c636316209d4f4e7d8648cc5832347e792076) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
DBIx::Class::Storage::DBI::_dbh_execute(): Data too long for column
'invitekey' at row 1 at /home/vagrant/kohaclone/Koha/Object.pm line 125
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit f19a99209528e85003cd56104640effe75e4f126) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 17 Oct 2018 22:11:29 +0000 (19:11 -0300)]
Bug 21597: Field 'amount' doesn't have a default value
Fix t/db_dependent/Accounts.t
Default value could be 0, or left as it.
It seems that the different initialisation we have in the code pass a
value for 'amount'
account_offsets.amount
`amount` decimal(26,6) NOT NULL,
DBIx::Class::Storage::DBI::_dbh_execute(): Field 'amount' doesn't
have a default value at /home/vagrant/kohaclone/Koha/Object.pm line 125
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 82884b0bd81a79c9a0c700463f1fcc632314863c) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 17 Oct 2018 22:07:20 +0000 (19:07 -0300)]
Bug 21597: Column 'notforloan' cannot be null
Fix t/db_dependent/Circulation.t
items.notforloan:
`notforloan` tinyint(1) NOT NULL DEFAULT '0',
t/db_dependent/Circulation.t .. 115/119 DBD::mysql::st execute failed: Column 'notforloan' cannot be null [for Statement "UPDATE `items` SET `notforloan` = ? WHERE ( `itemnumber` = ? )" with ParamValues: 0=undef, 1='1046'] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1832.
# No tests run!
# Failed test 'No tests run for subtest "item-level_itypes = 0"'
# at t/db_dependent/Circulation.t line 2356.
# Looks like you failed 1 test of 2.
# Failed test 'CanBookBeIssued | notforloan'
# at t/db_dependent/Circulation.t line 2359.
Can't locate object method "rethrow" via package "DBD::mysql::st execute failed: Column 'notforloan' cannot be null [for Statement "UPDATE `items` SET `notforloan` = ? WHERE ( `itemnumber` = ? )" with ParamValues: 0=undef, 1='1046'] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1832.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit a40b8ebde788ac4082670e30b03fcbade2cc5544) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 33c142ba3b7cfd37dd90569de2a5802849b09ef5) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 17 Oct 2018 22:31:14 +0000 (19:31 -0300)]
Bug 21598: 'koha_kohadev.aqbudgets.budget_parent_id' isn't in GROUP BY
DBD::mysql::db selectall_hashref failed:
'koha_kohadev.aqbudgets.budget_parent_id' isn't in GROUP BY [for
Statement "
at /home/vagrant/kohaclone/C4/Budgets.pm line 558.
and
at /home/vagrant/kohaclone/C4/Budgets.pm line 565.
Test plan:
hit /cgi-bin/koha/admin/aqbudgets.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 60e00a332e2a500746f12908042dd61250d1f79a) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Thu, 18 Oct 2018 10:05:38 +0000 (10:05 +0000)]
Bug 21593: Remove GROUP BY from GetAuthValueDropbox
With new MYSQL modes we are permitted only full group by.
In this case I don't think we need a GROUP BY at all
To test:
1 - Try to pay a fine or create a borrower
2 - Internal server error
3 - Apply patch
4 - Page should load
5 - Test various authorised values ot ensure they work
e.g. Set bsort1 and bsort2 to have some authorised values with and
without branch limits
set PAYMENT_TYPE to have some values with and without branch limits
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 87c7e534f15aff14d6e82cbb67ecbb8e8715c2b7) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 8 May 2018 17:25:57 +0000 (14:25 -0300)]
Bug 20351: Shortcut serials scripts if a blocking error appeared
The idea of output_and_exit_if_error (added by bug 18403) is to make sure
parameters are valid before executing the script.
If not (old or broken URLs), we shortcut everything coming next to display a
generic error ("object does not exist", "you do not have permission to do that", etc.)
This bug report fixes the scripts under serials/*.
Test plan:
Hit the script under the serials directory with an invalid subscriptionid parameter
and confirm you get an error instead of the normal view with empty values.
The goal is not to be exhaustive during the first iteration, but at least to fix
the most common views.
For instance:
/cgi-bin/koha/serials/subscription-detail.pl?subscriptionid=XXX
/cgi-bin/koha/serials/serials-collection.pl?subscriptionid=XXX
/cgi-bin/koha/serials/routing.pl?subscriptionid=XXX&op=new
/cgi-bin/koha/serials/subscription-add.pl?op=modify&subscriptionid=XXx
/cgi-bin/koha/serials/subscription-add.pl?op=dup&subscriptionid=XXX
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 62285d2de463811380262e4cc65c82937145d477) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Andreas Roussos [Sun, 7 Oct 2018 18:00:09 +0000 (21:00 +0300)]
Bug 21513: Add a 'Cancel' button to the authority editor and remove duplicate 'Save' button
The authority editor (authorities/authorities.pl) does not have
a 'Cancel' button. Also, it has two 'Save' buttons.
This patch fixes that by:
a) adding a 'Cancel' button to the floating toolbar at the top
b) removing the 'Save' button from the bottom of the page
Test plan:
1) Go to Home > Authorities and launch the authority editor by
clicking on 'New authority'. Notice how the editor doesn't
have a 'Cancel' button. Also notice the two 'Save' buttons.
2) Apply the patch.
3) Re-launch the authority editor, and hit cancel; you should
be taken back to Home > Authorities.
4) Edit an existing authority, and hit cancel; you should be
taken back to the details page for the authority you chose.
5) Edit an authority as new (duplicate), and hit cancel; you
should be taken back to Home > Authorities (this behaviour
is mimicking the bibliographic editor: when duplicating a
biblio the 'Cancel' button will take you back to Home >
Cataloging).
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 2cffe3a574e14d5f35ce7b1d9ffe28a153dcb37e) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Sun, 12 Aug 2018 15:08:57 +0000 (17:08 +0200)]
Bug 14786: Use MARC istead of ISO2709 everywhere
This patch changes the term ISO2709 in the templates to use
MARC instead.
Test plan:
- The term was changed on the following pages in staff:
- Advanced catalouging editor > Save to catalog
- Patron account > Check out (Activate ExportCircHistory) > Format
- Patron account > Check out > Help page
- Lists > Download list
- Acquisitions > Add order to basket > From a staged file (breadcrumbs)
- Administration > System preferences > ExportRemoveFields
- Cart > Download
- Tools > Export data > Output format
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 81875ab282c1daa98dec2e0f5f20ba74f411ac32) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Mon, 8 Oct 2018 14:25:50 +0000 (15:25 +0100)]
Bug 21456: (QA follow-up) Catch missed case in authorities merge
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 796e4e5d2be5ec87970f8b586f940e4abddb687d) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Andreas Roussos [Sun, 30 Sep 2018 10:06:28 +0000 (13:06 +0300)]
Bug 21456: The 'New authority' button lists authority types inconsistently
The 'New authority' button does not always list the available
authority types in A-Z order based on their description.
This patch fixes that.
Test plan:
1) Go to Home > Authorities in the staff client; notice how the
'New authority' button lists auth types sorted by description.
2) Go to an authority's detail page; notice how the same 'New
authority' button will list auth types sorted by their code.
3) Apply the patch.
4) In an authority's detail page, the 'New authority' button will
now list the available authority types sorted by description.
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit bf7c8303ca7f9e4955f25fc4d1f30d65d8c52dc9) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the 'Order' term in neworderbiblio.tt,
newordersubscription.tt, newordersuggestion.tt, and
z3950_search.tt for 'Place order'.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 706d21ee53dd5072eec2234415fc5c8ff4b1ea17) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the 'Order' term in marc_modification_template.tt
for 'Rank'.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 5ca776d6e171de1b093163ab83ba589d5ae4d7cc) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Thu, 16 Jun 2016 13:28:01 +0000 (09:28 -0400)]
Bug 16754: Use validation plugin in budgets, planning, and contracts
This patch removes the custom javascript form validation from three
templates: Budgets, budget planning, and contracts. Validation via the
validation plugin is done instead.
This patch also removes use of event attributes like onclick and
onchange. Also changed: I added the "Required" text next to required
fields as necessary.
To test, apply the patch and go to Administration -> Budgets.
- Test the budget creation process for adding, editing, and duplicating
budgets. In all cases:
- The start date and end date should be required
- You should be warned if you enter an end date which falls before the
start date.
- The description should be required
- The budget amount should be required to be a number
To test the budget planning page:
Note that much of the JS removed from this template was unused. It
looked for inputs by the name 'est_total' which don't exist.
- When viewing the table of funds for a budget, select a choice from the
'planning' toolbar menu.
- Verify that after entering a numeric value in any cell, the
'remaning' value at the end of the row is correctly updated.
- Verify that after entering non-numeric data an error is displayed.
- Verify that clicking the 'auto-fill' button at the end of the row
works to fill any empty or zero-value fields with the remaning funds
available.
To test the vendor contracts page:
- Go to Acquisitions -> Vendor -> Contracts
- Add or edit a contract
- Confirm that name, start date, and end date are required.
- Confirm that you are warned if you enter an end date which falls
before the start date.
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 23265158fcab25f8f5188cea6f07af46812d41cc) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 16 Oct 2018 17:09:29 +0000 (17:09 +0000)]
Bug 21583: Don't use Asset.js for external script files
To test:
1 - Enable Novelist in staff client:
NovelistSelectStaffEnabled: Add
NovelistSelectStaffProfile: anything
NovelistSelectPassword: anything
( these don't need to be valid, just not blank )
2 - Pull up a record detail page in staff client
3 - View page source - search for ns2init.js
4 - You won't find it
5 - Apply patch
6 - Reload details
7 - Search page source for ns2init.js
8 - It loaded! Huzzah!
Signed-off-by: George Williams <george@nekls.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 55225ba10b824f7e881738a20c751200843d3ec9) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 16 Oct 2018 14:00:59 +0000 (14:00 +0000)]
Bug 21579: Make showdiffmarc.pl work for authorities and biblios
To test:
1 - Have or make some authority records
2 - Have or make an authority matching rule
3 - Export your authrotities
4 - Import them using the matching rule
5 - On the 'Manage staged records' page view some diffs
6 - The import record is correct, but the existing records pull form
bibs
7 - Apply patch
8 - Repeat
9 - Confirm you see the expected authority matches
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marjorie Vila <marjorie.barry-vila@collecto.ca> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 7f0207d2ad162a86cf5e09e437565b66b91c5004) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 16 Oct 2018 13:27:37 +0000 (10:27 -0300)]
Bug 21155: Prevent SwitchOnSiteCheckouts.t to fail randomly
# Failed test 'The date_due should have been set depending on the circ
rules when the on-site checkout has been switched'
# at t/db_dependent/Circulation/SwitchOnSiteCheckouts.t line 126.
# got: '2018-10-16T23:59:00'
# expected: '2018-10-21T23:59:00'
TestBuilder set date to today, so issuingrules.harduedate will be set to
today.
issuingrules.hardduedatecompare will be set to an integer.
If set to 0, $datedue will be reset to the hard due date
The call stack is: AddIssue > CalcDateDue > GetHardDueDate
In GetHardDueDate:
3509 if ( $hardduedatecompare == 0 || $hardduedatecompare == $cmp ) {
3510 $datedue = $hardduedate->clone;
3511 }
To fix this random failure we need to set issuingrules.harduedate to undef.
Test plan:
0. Do not apply this patch
1. Modify the test to set hardduedatecompare to 0 (search 'my $issuingrule = ')
2. Execute the test and confirm the failure
3. Apply this patch
4. Execute the test and confirm the it is no longer failing
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 4e6d9defc180204461f80477be287ade7fcfc11b) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Tue, 9 Oct 2018 12:22:35 +0000 (12:22 +0000)]
Bug 21552: Use raw filter for displaying RoutingListNote
The RoutingListNote system preference works like other prefs
allowing you to insert your own content on the routling list
template using HTML. The default text even uses HTML, so it
looks broken without this patch.
To test:
- Add a subscription
- Add a new routing list to it
- Add some patrons to it
- Save
- preview routing list
- Verify that the note shows and is formatted correctly.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit f902041e244cc35ecc99e3ca256ff24c843a8b04) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 26 Oct 2018 11:32:20 +0000 (12:32 +0100)]
Bug 21351: Rename the Taiwanese language pack to use correct file name
The words "Han (Simplified variant)" is appearing in the language name
because the file is titled "zh-Hans-TW" when it should be titled
"zh-Hant-TW". The database is set up to use "Hant" but it just
incorrectly named.
Test plan
1. Apply patch.
2. Install zh-Hant-TW on your Koha server.
3. Navagate to I18N/L10N preferences and confirm that the english text description states (Traditional variant).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Files on translate.kc.org have already been fixed by Bernardo. Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit fd0df2ad55f9a5ff180dc0dfa22fede5f0ad37cd)
Converted to removal of files rather than rename as translation merges
had already created the new files as expected. Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Wed, 10 Oct 2018 15:53:13 +0000 (15:53 +0000)]
Bug 21542: Use modal and password field for overdrive password
To test:
1 - Enabled Overdrive and fill all preferences
2 - Make sure OverDrivePasswordRequired is true
3 - Go to opac account
4 - Log in to overdrive
5 - Note the input is shown
6 - Apply patch
7 - Repeat
8 - Note popup is now a modal
9 - Note password is now hidden
10 - Confirm overdrive integration works as before
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 32dc4a7bfaeebcff2be739fdf5f15e0f8bad4faa) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 9 Oct 2018 10:56:43 +0000 (10:56 +0000)]
Bug 21082: (RM follow-up) address QA issues
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit d83d5ec5a4edfc4927a5f8e5ca3d1cde2942f5fe) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 9 Oct 2018 10:41:03 +0000 (10:41 +0000)]
Bug 21082: DBRev 18.05.05.001
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 91790fdd90c8dc59b70f6defd63b088febf5b39d) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 17 Jul 2018 14:16:33 +0000 (14:16 +0000)]
Bug 21082: Update OverDrive authentication method
Testing will require an OverDrive account, you should be able to obtain a
developer account here:
https://developer.overdrive.com/
You will need to register a SIP connection for patron authentication
To test authentication:
1 - Set authname default in OD prefs
2 - Sign in as a patron whose branch matches authname
3 - Verify the patron can sign into OverDrive
4 - Set the patrons branch authname to be incorrect
5 - Verify branch specific authname is used and patron cannot sign in
6 - Set the default authname to be incorrect and patron's branch
authname to be correct
7 - Verofy patron can sign in
To test circulation:
1 - Fill out all OD prefs and enable circulation
2 - Sign in to opac
3 - Verify you have an OverDrive tab
4 - Click 'Login to Overdrive'
5 - If password required you shoudl be prompted, otherwise you should be
signed in and see account info
6 - Test logging out and in
7 - Log-in, perform a search on the opac - you should see hold/checkout
buttons
8 - Test the buttons
9 - After holding/checking out items, check your account page
10 - Verify info is correct
11 - Log out of overdrive
12 - Search catalog click overdrive results
13 - Test "Login to Overdrive" link on OD results
14 - Verify page is reloaded, buttons show and work
Signed-off-by: Sandy Allgood <sandy.allgood@citruslibraries.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit e762bdb9b2243070fd33e9aeb1bdfb88f2af2193) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 17 Jul 2018 14:08:13 +0000 (14:08 +0000)]
Bug 21082: Add new admin page for overdrive
The 'authname' field required for OverDrive can differ per branch.
This patch adds Koha Objects for dealing with OD info and submitting
authnames per branch. The description is left open so future branch info
can be added.
To test:
1 - prove -v t/db_dependent/Koha/Library/OverDriveInfos.t
2 - visit cgi-bin/koha/admin/overdrive.pl
3 - Add some authnames for various branches
4 - Verify data saves correctly
Signed-off-by: Sandy Allgood <sandy.allgood@citruslibraries.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit df339d0372c633635bc63d87d7caa7807a540aed) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 17 Jul 2018 13:50:43 +0000 (13:50 +0000)]
Bug 21082: Database updates
Signed-off-by: Sandy Allgood <sandy.allgood@citruslibraries.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 67d13dc5867e813efad430c6352657e459259bab) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Thu, 11 Oct 2018 15:59:13 +0000 (15:59 +0000)]
Bug 21550: DataTables four button pagination uses the wrong icon for disabled buttons
This patch modifies the DataTables CSS which styles "full_nubmers"
controls which are disabled: First and Previous buttons on the first
page of results, Next and Last buttons on the last page of results.
These buttons should have gray icons instead of blue.
To test, apply the patch and clear your browser cache if necessary. View
a page which uses a "full_numbers" DataTables configuration, e.g.
- Administration -> Cities
- ILL requests -> List requests
- Circulation -> Holds to pull
Confirm that buttons in their disabled state have a gray icon and text
instead of blue.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit d9b922f46f8d551949f337f29edef6985130c8ba) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21115: Add multi_param call and add divider in cache key in svc/report and opac counterpart
Resolve things like:
CGI::param called in list context from package CGI::Compile::ROOT::usr_share_koha_prodclone_opac_svc_report line 42, this can lead to vulnerabilities. See the warning in "Fetching the value or values of a single named parameter" at /usr/share/perl5/CGI.pm line 436.
The cache key in both script looks like:
opac:report:id:602018
but should for consistency be:
opac:report:id:60:2018
Note: The 2018 here is part of the sql_params and should not be
concatenated to the report id.
Test plan:
Do not yet apply this patch.
Make a report public, set cache to 300 secs.
Check its output with opac/svc/report.
Check for the warn in your log.
Apply the patch, restart Plack and flush cache.
Check opac/svc/report.
Modify your report; e.g. add a simple string to the SELECT.
Check opac/svc/report. You should still see cached output.
Flush the cache.
Check opac/svc/report. You should now see the added text.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested also by clearing individual keys with $cache->clear_from_cache.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit bfbbe52ff7ff0ec93825684e4728db705b4100d1) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Blou [Thu, 4 Oct 2018 17:00:08 +0000 (13:00 -0400)]
Bug 21291: (follow-up) Pass subscriptionsnumber to all tools in staff detail's sidebar
The subscriptionsnumber is required in biblio-view-menu.inc to display
the Subscription(s) tab. In detail.pl, if you click any of
Labeled MARC (you need to set the syspref viewLabeledMARC)
Hold(s)
Article requests
Checkout history
Modification log
Rota (you need to set the syspref StockRotation)
you lose the Subscription(s) tab.
This patch fixes the display by having each feature script generate that
value to be passed to the UI. I keep this separated from the first patch
since it's not exactly the same issue, and the solution might not
please.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit c6c4d82325eb7d11b34a113c69acbff18e283542) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Blou [Thu, 30 Aug 2018 14:33:44 +0000 (10:33 -0400)]
Bug 21291: request-article.pl doesn't show MARC, LabeledMARC and ISBD in sidebar
When on a detailed record in the intranet, any click on the sidebar
will lead you to another page with the same sidebar EXCEPT for "Article
requests".
When clicking on article requests, you get a new sidebar without
MARC
Labeled MARC
ISBD
This fix adds the required C4::Biblio::enabled_staff_search_views that
loads the required hash with the permissions.
TEST
0) login with a user having all rights
1) go to any detailed notices, notice the sidebar on the left
2) click on MARC
3) notice the sidebar is the same in the new page
4) click on Request articles
5) notice the missing labels on the sidebar
6) apply patch, redo steps
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit ab13b53854e0aa726c8112d8f31cc553484637bd) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In inventory, optional filters are build from authorize values categories used for items.notforloan, items.itemlost, items.withdrawn and items.damaged.
The bug is that description of value 0 is always "For loan".
This seems to be only for "notforloan".
Second bug is that if a description exists for "notforloan" value 0, it is not used.
This patch corrects by adding "For loan" only for "notforloan" authorized values and if there is no 0 value.
It changes the description added by code from "ignore" to a more unlikly user defined "__IGNORE__".
Test plan:
1) Make sure you have authorized values defined on items.notforloan, say "NFL" category, with at least a value and description but no 0 value
2) Make sure you have authorized values defined on items.itemlost, say "LOST" category, with 0 = "Not lost" and 1 = "Lost"
3) Go to inventory /cgi-bin/koha/tools/inventory.pl
4) Without patch you see "For loan" on both items.notforloan and items.itemlost
5) With patch you see "For loan" only in items.notforloan, you see for items.itemlost : "Not lost" and "Lost"
6) Create in authorized values category "NFL" a value 0 with description "Available"
7) Go to inventory /cgi-bin/koha/tools/inventory.pl
8) Without patch you see "For loan" in items.notforloan for value 0
9) With patch you see "Available" in items.notforloan for value 0
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 8d9284668c6de2d5fbfc4079a8b0516ba1645876) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 18655: Correct the choose link in unimarc_field_210c value builder
- Link 'choose' is now a button.
- It doesn't call directly javascript anymore (use of listener).
- field to load stored in html on the page (less escaping needed).
Test plan :
1) Use UNIMARC catalog
2) Define unimarc_field_210c value builder on 210$c
3) Define an autority type EDITORS with heading on 200$b
4) Create an autority of this type with a single quote in heading, ie : l'avenir
5) Index this new autority
6) Edit a biblio record and launch 210$c value builder
7) Search for new autority
8) Click on 'Choose'
=> Heading should be pasted in 210$c
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 9965aa43e15aaa63fd8999daa98618d20698e89b) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Mon, 8 Oct 2018 10:47:15 +0000 (11:47 +0100)]
Bug 21113: Corrections to patron merge confirmation prompt
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit c6198717c4be56ba99deb57aa6d117d23a032eea) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Wed, 10 Oct 2018 15:02:14 +0000 (15:02 +0000)]
Bug 21537: Fix typo for options_for_item_types
To test:
0 - Set UseACQFrameworkForBiblioRecords to 'Use'
1 - Define a subfield in the ACQ framework linked to authorised value
'itemtypes'
2 - Make sure that field is visible
3 - Create a purchase suggestion
4 - Accept it
5 - Go to Acquisitions
6 - Find a vendor with an open basket, or create one
7 - Add to the basket using a suggestion
8 - Choose the suggestion
9 - Internal server error
10 - Apply patch
11 - Place order form a suggestion again
12 - Confirm that the field linked to itemtypes shows correctly
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 959162b2f3c9689bb56433ee08c300b40822d700) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Ere Maijala [Sun, 16 Sep 2018 22:13:55 +0000 (01:13 +0300)]
Bug 21365: Call BiblioAutoLink from AddBiblio and ModBiblio
This makes e.g. the advanced MARC editor, and anything that uses AddBiblio or
ModBiblio honor BiblioAddsAuthorities.
To test:
1. Make sure BiblioAddsAuthorities and AutoCreateAuthorities preferences are enabled.
2. Add a new record using advanced editor (enable EnableAdvancedCatalogingEditor to
use it), include a previously non-existing author.
3. Save the record and observe the author get an authority number.
4. Add another author, save the record and make sure it also gets an authority number.
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 1a8e1165ca7abf9e2b7e5c7de0cdf26cbd4e30ac) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Marcel de Rooy [Wed, 10 Oct 2018 11:43:40 +0000 (13:43 +0200)]
Bug 21279: Fix in transport cost matrix
Test plan:
On Home › Administration › Transport cost matrix you should no longer
see " ".
Fill some values and save, you should see the correct values.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 1fddd295b8e83b60f2b838f09f3175c5acfeec28) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Mon, 15 Oct 2018 17:53:35 +0000 (14:53 -0300)]
Bug 21479: "Mock" SearchEngine to use Zebra
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit dc6bea7860aba7933f7e979cbe7c53e9cb15ba05) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Mon, 15 Oct 2018 14:42:34 +0000 (11:42 -0300)]
Bug 21479: Zebra index can return different result
If the zebra index has been rebuilt by previous tests, the order/results
will be different, and we will not have biblionumber 1, 3, 5
Let make this more flexible
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit e7574481b19addd2747baf5917e772d28cd38bc5) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 12 Oct 2018 18:37:44 +0000 (15:37 -0300)]
Bug 21479: Remove the trace if the node does not exist
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit be4f22f5a0745ef64c6bf20b89bd9f4fcbe40403) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 9 Oct 2018 16:30:54 +0000 (13:30 -0300)]
Bug 21479: Add regression tests
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 45fbd36e1f2e1aa622eec1ba588424cc50243fb3) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Wed, 3 Oct 2018 14:13:49 +0000 (14:13 +0000)]
Bug 21479: Fix remove from cart links at the OPAC (should remove only 1)
This patch changes the way biblionumbers are passed to the cart script
for adding and removing single items. The title's biblionumber is now
stored in a data-attribute on the links for adding and removing. This
should be a more robust, unified way to handle these single-item
operations.
To test, apply the patch and enable the opacbookbag system preference.
Test adding and removing items from the cart from various pages using
various methods:
- By clicking an "Add to your cart" / "Remove" link in search results
- By clicking an "Add to your cart" / "Remove" link on a detail page
- By checking boxes in search results and adding via the dropdown
Each operation should work correctly.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2cd49034c43a16c7497f05e94c18396532fceddc) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Mon, 15 Oct 2018 13:07:11 +0000 (13:07 +0000)]
Bug 19687: (RM follow-up) Export correct function name
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit dab70daa55a90f7b50f8c2dc9fefdef0762e5daf) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Gustafsson [Wed, 26 Sep 2018 15:25:44 +0000 (17:25 +0200)]
Bug 19687: Undefined subroutine in bulkmarcimport
Bulkmarcimport produces undefined subroutine error for
C4::Items::TransformMarcToKoha and C4::Items::GetMarcStructure
probably caused by mutually recursive modules. Put exports in
BEGIN clause before all the other imports.
To test:
1) Run bulkmarcimport.pl before applying patch and verify
that undefined subroutine error occurs
2) Apply patch
3) Run bulkmarcimport.pl again and verify that no errors are
produced
Sponsored-by: Gothenburg University Library Signed-off-by: George Veranis <gveranis@gmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 3f09e1d73338c86762412546e1a0617df698f422) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21320: Holds to pull should honor syspref AllowHoldsOnDamagedItems
Test plan:
1. Set syspref AllowHoldsOnDamagedItems to Allow
2. Create a hold on record with item which is damaged
3. Verify that it doesn't appear in report
4. Apply patch and verify that it's now visible
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b23fe0b0b8d468fe80d40aef1a12296421cc1d37) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Alex Arnaud [Wed, 21 Feb 2018 13:10:50 +0000 (13:10 +0000)]
Bug 10382: Course reserves: handle empty values
Test Plan:
1) Create an item, do not set a collection code
2) Add the item to a course, and choose to set a collection code
3) Ensure the course is enabled, and the collection code is now visible
4) Disable the course, ensure the collection code is no longer visible
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 9c6025ccbfd0c57d45fec444ee57e72c3aad512b) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Alex Arnaud [Thu, 9 Mar 2017 13:42:04 +0000 (13:42 +0000)]
Bug 10382: Add unit tests for course items
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 3e6f9b8a1d5b293cfe5a00732e2b6f1371046855) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Wed, 5 Jun 2013 14:01:17 +0000 (10:01 -0400)]
Bug 10382: collection not returning to null when removed from course reserves
Test Plan:
1) Create an item, do not set a collection code
2) Add the item to a course, and choose to set a collection code
3) Ensure the course is enabled, and the collection code is now visible
4) Disable the course, ensure the collection code is no longer visible
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b1bb9f9e6b028dce0109755180100e4033424227) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 9 Oct 2018 17:01:07 +0000 (14:01 -0300)]
Bug 21464: Hide patron's title not biblio's title
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 07fa37abbe325e136cd84f2dd5e1971d64c20d65) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Create some overdues
Export them: "Home › Circulation › Overdues" then click the link on top
of the table.
All the different columns of the generated CSV file must be filled
correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8a8c0ae51e2b1128942f6dff5ca022433355314e) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 9 Oct 2018 13:47:11 +0000 (10:47 -0300)]
Bug 15734: Use To.json to filter audio alerts
Test Plan:
1) Enable audio alerts
2) Note audio alerts don't work
3) Apply this patch
4) Note audio alerts now work
Use complex selectors to test:
#circ_returns p.problem:contains('Not checked out.')
#doc3 > #bd
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 58314233f70fd9fd2f2830250ff0362e369b6ff1) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Sat, 29 Sep 2018 18:16:46 +0000 (15:16 -0300)]
Bug 21426: Handle USE_MEMCACHED=no in koha-create
Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Works as intended. I've set USE_MEMCACHED to "no" and created a new
Koha instance. Home > About now reports this information: Memcached:
Servers: undefined | Namespace: undefined | Status: unknown | Config
read from: Nowhere [...] | Effective caching method: Cache::Memory
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit ffca9decadf539018e447237e56bce76c81bdd64) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Mon, 15 Oct 2018 13:18:33 +0000 (13:18 +0000)]
Bug 21493: (18.05.x) Remove incomplete icon style from serial issues tabs
This patch adds CSS to exclude serial issues history links from having
an icon background. There is no part of the icon sprite which is
designed for that purpose.
This patch also tweaks the positioning of a couple of icons.
To test, apply the patch and regenerate the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_Bootstrap_OPAC_LESS_files).
- Open the detail page for a bibliographic record in the OPAC which has
subscriptions.
- Click the "More details" link.
- Confirm that the "Brief history" and "Full history" links have no
icon.
- Click the "Full history" link and do the same.
- On the normal, MARC, and ISBD views, confirm that the icons for those
links look correct.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Wed, 7 Feb 2018 14:06:56 +0000 (15:06 +0100)]
Bug 20151: always use current language for stemming
When stemming is enabled, in catalog searching "C4::Search::_build_stemmed_operand" will transform query operand into stemmed operand using stemmer Lingua::Stem::Snowball with a specified language.
This stemmer returns undef stemmed operand if no language is defined.
In main catalog search (catalogue/search.pl) current language is used.
But in other pages "acqui/neworderbiblio.pl" and "cataloguing/addbooks.pl" no language is defined so stemmed operand is empty and so stemming is not applied.
This patch corrects by returning in "C4::Search::_build_stemmed_operand" operand without change if no langage is defined.
And uses current langage in pages "acqui/neworderbiblio.pl" and "cataloguing/addbooks.pl" so all catalog search uses stemming.
Test plan :
1) Enable system preferences QueryStemming and QueryWeightFields
2) Disable system preferences QueryAutoTruncate, QueryFuzzy and UseQueryParser
3) Go to intranet main page and click on "Search the catalog" tab
4) Perform a search (without index) that uses the stemming, for example searching for "years" will also match "year"
5) Note how many results you get, for example "year" gets 24 results and "years" gets 24 results
6) Go to "Cataloging" module
7) Perform a search on same word in "Cataloging search" tab
8) Note how many results you get
9) Without patch you get fewer results than first search (step 5) because stemming is not applied, for example "year" gets 11 results and "years" gets 15 results
10) With patch you get the same results as first search (step 5) because stemming is applied, for example "year" and "years" gets 24 results
11) Same tests in aquisition module
12) On a basket, click "Add to basket" and perform a search in "From an existing record"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 78a692dee4523d04986ec394442c3a6d80ea0771) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21389: Correct Javascript error on article requests page
Bug 21076 fixed a Javascript error on article requests page when patron is found.
There is also an error when patron is not found, with message :
Patron not found
No patron with this name, please, try another
This patch fixes by replacing TT condition by a JS condition testing the existance of the patron input.
Test plan:
1 - Do not apply patch
2 - Enable article requests
3 - Search on staff client and click 'Request article'
4 - Search for a patron that does not exist
5 - You get a yellow message "Patron not found"
6 - View error in console
7 - Apply patch
8 - Reload
9 - Not error is gone
10 - Search for a patron that does exist
11 - Check there is no error in console
12 - Check that autocompletion works
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b27db0fbfc0b715df1b63c57228a9945d4834f29) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Andrew Isherwood [Wed, 26 Sep 2018 13:04:00 +0000 (14:04 +0100)]
Bug 20548: (follow-up) Fix unit tests
Removed the "Backend create: copyright clearance" unit test since we no
longer have a "copyrightclearance" stage, hence we don't have a block in
the template handling it, hence the test failure!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit e6bf76b9c712913e549f43a30830ea612c73befa) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the erroneously added workflow that requires staff
users to agree to the copyright clearance declaration defined in the
ILLModuleCopyrightClearance preference. Only OPAC users should be
required to accept the declaration.
To test:
1) Ensure you have at least one ILL backend available:
https://wiki.koha-community.org/wiki/ILL_backends
2) Ensure you have the "ILLModule" preference enabled
3) Add some text to the "ILLModuleCopyrightClearance" preference
4) As an OPAC user make an ILL request:
a) Navigate to a search results page in the catalog
b) Click the "Make an Interlibrary Loan request" link at the bottom
c) Choose "Create a new request", then select a backend
d) Observe the text you added earlier is displayed with buttons for
agreeing or disagreeing
5) As a staff user, select the "ILL requests" button on the front page of
the intranet site
a) Choose "Create a new request", then select a backend
b) Observe that you are NOT prompted to agree to the text you added
earlier
Assigned-to: Andrew Isherwood <andrew.isherwood@ptfs-europe.com> Signed-off-by: Barry Cannon <bc@interleaf.ie> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit ad35c9702eb1da9bec331312701e71ce6ab5cf91) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Fri, 5 Oct 2018 17:05:19 +0000 (17:05 +0000)]
Bug 16420: Buttons inconsistent between "Hold found" and "Hold found (waiting)" dialogs in checkin
This patch makes minor changes to the text of hold confirmation buttons
in the checkin process in order to make them more consistent.
Also changed: Removed the "danger" class from the "Ignore" button for
readability and consistency's sake.
To test, apply the patch and check in an item which is on hold for a
patron at your logged-in library. The hold confirmation dialog's buttons
should read "Confirm hold," "Print slip and confirm," and "Ignore."
Confirm the hold, then check in the same item again.
In the dialog, the buttons should read "Confirm hold," "Print slip and
confirm," and "Cancel hold."
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 96c2df5804ce3ac84e5963d6b9764553a97a6978) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21500: Remove warnings in rotating collections
To test:
- Go to Tools > Rotating collections
=> FAIL: Some warinings on the logs
- Apply this patch
- Reload page
=> SUCCESS: No warinings
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 40803d30359f347417999429b612fcece9fc96f9) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Andreas Roussos [Sat, 6 Oct 2018 07:15:26 +0000 (10:15 +0300)]
Bug 21506: DataTables four button pagination uses the wrong icon for First and Last buttons
Pages with DataTables' four button pagination use the wrong
icon for 'First' and 'Last'. Also, the icons for all four
buttons are truncated at the bottom.
This patch fixes that.
Test plan:
1) Go to a page that uses four button pagination (e.g. Home >
Administration > MARC frameworks) and notice how the
pagination icons for First/Previous and Next/Last are the
same. Also notice all four icons are clipped at the bottom.
2) Apply the patch.
3) Refresh the page; the First and Last buttons' icons now
include a vertical bar, and there is no clipping visible.
4) For completeness, check other affected pages as well.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 074c329774adb7b23f85293a7f6d146c0d989f99) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 9 Oct 2018 11:30:23 +0000 (11:30 +0000)]
Bug 21417: DBRev 18.05.04.002
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit cf8890465d32d780e4177438d9b6ae807b1df36d) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Colin Campbell [Thu, 27 Sep 2018 15:07:37 +0000 (16:07 +0100)]
Bug 21417: (QA follow-up) Display default EAN as such in admin display
A branch value of null is interpreted as the default
Add text 'All libraries' to this case in the display
rather than blank so that its function is clear to the
user
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit d70daacebae50fde8449f4cec2bb4578747610fc) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Thu, 27 Sep 2018 10:51:27 +0000 (06:51 -0400)]
Bug 21417: EDI ordering fails when basket and EAN libraries do not match
When clicking Create EDIFACT Order on /acqui/basket.pl, an EDIFACT message will not be generated if aqbasket.branch does not match edifact_ean.branchcode. This failure does not generate any sort of error message, it just fails to produce a message.
We should allow ean's to not require a branch to be set, then if we don't find a branch specific each, we can look for the default version of the ean.
Test Plan:
1) Apply this patch set
2) Run updatedatabase
3) Verify you can create a Library EAN without setting a branchcode for it
4) Verify you can use this EAN to send an EDI order where the basket has a branchcode set
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 18674cfde322c52fafb3114b397bb1ebe7941b97) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>