Jonathan Druart [Fri, 21 Nov 2014 09:28:02 +0000 (10:28 +0100)]
Bug 13215: Fix notice deletion
This patch could have only been
- name => $values[0]->{name},
+ name => $letter->{name},
Other changes are just indentation and variable names (send an hashref
$letter to the template and use the Branches TT plugin to display the
branch name)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 21 Nov 2014 09:24:07 +0000 (10:24 +0100)]
Bug 13215: Fix notice edition
C4::Letters::getletter does not set mtt in value ( i.e. { email => "my
email notice} ) at the contrary of the get_letter routine defined in
tools/letters.pl.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 6 Nov 2014 15:02:08 +0000 (16:02 +0100)]
Bug 13215: The same letter code can be used for several libraries
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Liz Rea [Mon, 6 Oct 2014 20:35:19 +0000 (09:35 +1300)]
Bug 12856: koha-disable fails without disabling site
To test:
Package up a branch with this patch
install that package
create a site - sudo koha-create --create-db testdisable
enable a site - sudo koha-enable testdisable
check it's enabled - sudo koha-list --enabled
* it should show up
disable a site - sudo koha-disable testdisable
Do this for both debian squeeze/wheezy and ubuntu 12.04 and 14.04, if you can. I'd like to see a sign off from a debian (sq/wh)eez(e/y) or ubuntu 12 user, because I could only test reliably on ubuntu 14.04.
* make sure apache restarts and no errors are produced
check it's disabled - sudo koha-list --enabled
* it should not show up
check the site is still there - sudo koha-list
* it should still be there
check that the config file has the Include for disabling uncommented
* the line Include /etc/koha/apache-shared-disable.conf should not have a # in front.
Re-enable the site - sudo koha-enable testdisable
* the line Include /etc/koha/apache-shared-disable.conf should have a # in front.
And the final question - does the site work? All other functions unchanged?
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. code reads better too.
Edit: I added a missing space in one line.
Katrin Fischer [Sun, 23 Nov 2014 20:11:55 +0000 (21:11 +0100)]
Bug 13147: Update German web installer files for 3.18
- Adds translations for new permissions
- Adds ISO code to the sample currencies
- Removes a comment line about branchrelations from
sample_libraries (en)
To test:
- Run the German web installer with all sample data
selected
- Verify it runs without problems
- If you speak German - verify the translations make sense
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
No errors from the web installer. I verified that all the changes I saw
in the diff appeared correctly in the permissions. Currencies all
appeared to be correct after installation. Translations appeared to be
very German-looking.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 25 Nov 2014 14:04:25 +0000 (15:04 +0100)]
Bug 13332: Fix conflict between 5304 and 10860
These 2 bugs are in conflict.
The first one always join the issue table, the second one join on this
table too if the OnSiteCheckouts pref is enable.
So DBI raises an error if the pref is enabled (2 joins on the same
table).
This patch removes the conditional join.
Test plan:
Go on a detail record page with items and verify that items are list and
that the error no more appears in the log file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Reproduced the problem, the patch fixes it, no noticeable regression found.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, items are visible again.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 26 Nov 2014 11:39:22 +0000 (12:39 +0100)]
Bug 9043: Add a wonderful image
This patch adds the missing multiple-select.png image.
Test plan:
- search the pref 'advsearch'
- without this patch, you get a 404 error for the image
- with this patch, you don't get the error but a wonderful image on the
right of the "multiple" pref
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Wed, 26 Nov 2014 12:39:24 +0000 (13:39 +0100)]
Bug 13314: Follow-up for m.de.rooy in .mailmap
Email addresses in git seem to be case sensitive.
The list of shortlog -ns was good, but git shortlog -e still made a
difference.
Additionally, reworded initial comments slightly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 28 Oct 2014 12:12:46 +0000 (08:12 -0400)]
Bug 13152 - Duplicate phone hold notices when using Talking Tech
If a library is using Talking Tech for phone notices, any waiting hold
phone notice will show up twice!
This is because Koha generates on at the time the hold is set to
waiting, and then the cronjob TalkingTech_itiva_outbound.pl generates
it's own notice as well.
The former notice will always have a status of 'pending', as the
TalkingTech_itiva_inbound.pl script will update the notice the outbound
script created.
The solution is to prevent Koha from creating a phone notice for waiting
holds if TT is enabled, and let the cron script do it.
Test Plan:
1) Enable Talking Tech from the system preferences
2) Set a hold waiting phone notice in the notices and slips editor
3) Choose a patron, enable hold phone notices for that patron
4) Place a hold for a patron, and check it in so it's marked as waiting
5) Note the phone notice generated for the patron
6) Apply this patch
7) Repeat step 4
8) Note that this time, a phone hold waiting notice is not generated
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amends condition with an additional or statement. Shoudn't affect
anything but phone notices. Change appears logical.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 21 May 2014 08:18:38 +0000 (10:18 +0200)]
Bug 12298: The "feed" MTT does not seem to be used and can be removed
The feed message transport type exists but nobody knows how it can be
used. This patch assumes nobody uses it and removes it.
Before removing the entry in the DB, the updatedb entry will check if no
foreign key exists in order to avoid a delete in cascade.
This path does *not* deletes the occurrences in the templates.
Test plan:
Apply this patch, execute the updatedb script and verify the
message_transport_types table does not contain the 'feed' entry if it was not
in use.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch will remove the confusing option to configure message texts for feeds.
Checked on a database with an existing feed type notice (not deleted) and
on one without any references to the feed message transport type (deleted!)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Thu, 11 Sep 2014 14:59:37 +0000 (16:59 +0200)]
Bug 12865 - 'Pay amount toward all fines' does not record payment note
Without patch:
-------------
Make payment for patron who has fines
Select the Pay Amount button and add a note in the note box.
Select confirm
Result: The note does not display in list
With patch:
----------
Result: The note displays in list
Bonus testing: The note is included in system logs as well (Home:Tools:Logs)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Wed, 19 Nov 2014 10:40:39 +0000 (11:40 +0100)]
Bug 10956 - Series of OPAC searches can cause a browser crash
This patch fixes the issue for bootstrap. It was earlier fixed for the prog theme.
Solution: Prevent jQuery.fn.highlight = function(pat) to be called with empty pat
by skipping empty values in highlight loop.
To test:
Without patch, do a search as in comment #1 odr #3
Result: Endless loop (Script not responding)
Appply patch:
No endless loop, page displays OK
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
To reproduce you need to search a string with 2 spaces.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I didn't manage to reproduce the problem, but I couldn't find
any regression either trying multiple searches.
Trusting Marc's and Jonathan's testing.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
0) Select a serial subscription;
1) Click Edit -> Edit subscription;
2) Click Next;
3) Click Test prediction pattern;
4) Select 3 Vols;
5) Save subscription;
6) Select Planing tab;
7) Valide "Irregularity: 3 issues".
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: You have to select more than 1 issue as not to
be published to see the problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1/ Create a claimissue notice with something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
2/ Generated late serial issues.
3/ Send notifications to vendor.
4/ The order tags should not exist anymore in the sent email.
You can see bug 5342 for a more detailled test plan.
Note for QA: This should have been done in GetPreparedLetter, but I did
not find a better way to do.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Tested having the <order> tags on one line
and also for a multi-line layout.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12959 - Check in forgets to remember arbitrary backdating of returns setting
Whenever a librarian is prompted with a form during the checking process
( hold to fill, transfer, etc ) the date to backdate returns to is forgotten!
Test Plan:
1) Begin returning items with a remembered backdate
2) Check in an item that need transfered or has a hold
3) Complete the action requested
4) Note your set return date is now lost
5) Apply this patch
6) Repeat steps 1-3
7) Note your backdate is now remembered!
Signed-off-by: Sean McGarvey <smcgarvey@pascocountyfl.net> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Mon, 10 Nov 2014 19:53:20 +0000 (20:53 +0100)]
Bug 10749: Fix typo in budget_add_del permission
Updates the en permission file and adds a database
update to fix the permisson.
The update is done using the description, to not
untranslate non-English permission descriptions.
To test:
- Run the database update on your existing installation
and check the typo is gone
- Run the web installer and check there are no errors
and permissions are loaded correctly (and without typos)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 24 Nov 2014 15:18:50 +0000 (10:18 -0500)]
Bug 13330 - All overdue items with fines returned via checkouts table will have fines forgiven!
Due to a disconnect between how booleans are handled in Perl vs JSON,
all checkins done from the checkouts table will have fines forgiven!
This is because the parameters sent to svc/checkin are coded in JSON
and the JSON false is treated in Perl as the string 'false' which
evaluates to true!
Test Plan:
1) Find a patron with an overdue item that has a fine
2) Return the item via the checkouts table on circulation.pl or moremember.pl
3) Note the fine is forgiven
4) Apply this patch
5) Repeat steps 1-2
6) Note the fine is no longer forgiven
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Verified bug, fix corrects the problem.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Also tested waiving fines form the check-in page still works.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Fixes names and mappings for contributors from Oslo Public Library.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Kyle M Hall [Wed, 19 Nov 2014 12:24:20 +0000 (07:24 -0500)]
Bug 13297 - Shelving location PROC does not work according to manual
According to the manual, "Items will stay in the PROC location until
they are checked in".
This is not the actual behavior. Right now items will only change from
PROC to CART, and that is only if InProcessingToShelvingCart is enabled.
Some libraries want to use the PROC to permanent location feature,
without using the CART.
Additionally, the location is only removed if using returns.pl, but
that is not what the manual says either. What if the library uses
SIP2 devices for handling returns? This should be taken into
account.
Test Plan:
1) Apply this patch
2) Set an item's current location to PROC, and it's permananet location
to a different location.
3) Check the item in any way you wish
4) Note the shelving location is updated to the permanent location
5) prove t/db_dependent/Circulation/Returns.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested this with items which had items.location set to 'PROC' and
items.permanent_location set to NULL, '', and a real value, and it
worked correctly in all cases. I tested with check-ins from returns.pl
and from the table of checkouts in circulation and the PROC location was
correctly removed in both cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Sun, 23 Nov 2014 11:25:34 +0000 (12:25 +0100)]
Bug 13314: [QA Follow-up]: Add another line for Fridolin to .mailmap
There are still 9 patches of Fridolin under an old email address.
This patch also takes them into account.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested by generating the release notes. I noticed that
the 'company' list often has a domain name instead
of a company name, maybe something for another patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 13314: Fridolin and Simith fixes to the .mailmap file
As part of some tidying for the 3.18 release notes, I add this mappings.
To test run the command from the first comment before and after applying
the patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Kurdish translation files use a variant of Arabic script,
they need to be displayed as RTL.
Currently that is inferred from language dir name after
translation, and that name use the language tag, so we
need to change it from 'ku' to 'ku-Arab'
To test:
1) Translate to Kurdish
(cd misc translator; ./translate install ku)
2) Enable Kurdish on opac/staff
3) Test staff/opac interface, they are displayed as LTR
which is wrong
4) Disable Kurdish language
5) Do a cleanup (git clean -f -d)
5) Apply the patch
6) Translate again
(cd misc translator; ./translate install ku-Arab)
7) Enable again
8) Test again, this time display is correct (LTR)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Easy to test. Well spotted Bernardo.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
The "Override renewal limit" checkbox no longer works to un-hide the
renewal checkboxes in the table of checkouts. I assume this is because
the script works in such a way that it is looking for the checkboxes
before they are part of the document.
Test Plan:
1) Apply this patch
2) Check the "Override renewal limit" checkbox
3) Note the checkbox now appears
Note, this change allows the "X of Y renewals remaining" to be displayed
for non-renewable items. I left this as it is for two reasons: 1) it
gives the librarian more information that may be useful, and 2) it looks
nicer and more uniform.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm the bug and the solution.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, works as described.
Exception: on-site checkouts can't be renewed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 18 Nov 2014 14:16:53 +0000 (09:16 -0500)]
Bug 13271 - Subject search links broken if XSLT and OPACPopupAuthorsSearch are both off
This patch corrects some faults in the OPAC's bootstrap template which
prevent additional author and subject searches from working correctly
with OPACPopupAuthorsSearch both on and off.
Some JavaScript has been removed because it was used only by the prog
theme and is obsolete.
Locate a title with multiple subjects and additional authors. Test the
following conditions:
OPACXSLTDetailsDisplay is blank and OPACPopupAuthorsSearch is off:
- Clicking an additional author or subject link should directly trigger
the correct search without an JavaScript error.
OPACXSLTDetailsDisplay is blank and OPACPopupAuthorsSearch is on:
- Clicking an additional author or subject link should trigger a modal
window where you can select options for searching. Checking boxes and
submitting the form should perform the correct search.
OPACXSLTDetailsDisplay is set to "default" and OPACPopupAuthorsSearch is
on OR off:
- Clicking an additional author or subject link should directly trigger
the correct search without an JavaScript error.
(OPACPopupAuthorsSearch only works with the non-XSL view).
For extra credit: Test with JavaScript disabled and confirm that link
still work correctly.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm the bug and the solution. Before various JS errors: "ReferenceError:
e is not defined" and "ReferenceError: showSubjects is not defined". After:
Comforting silence, and functionnality.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Thu, 9 Oct 2014 14:10:24 +0000 (16:10 +0200)]
Bug 13053 - Do not use template cache when from commandline
You may define in config a folder (usually /tmp) for TT cache :
template_cache_dir in etc/koha-conf.xml.
Some perl pages may be launched from commandline, like tools/export.pl.
Also, the script gather_print_notices.pl uses C4::Templates.
The problem is that when script is launched from Apache, the Unix owner of cache files will be www-data. When script is launched from commandline, like in a cronjob, the Unix owner will be different (like a user named "koha"), causing a crash because cache files can only be read by its owner.
This script disables the template cache if perl script is called from commandline. This cache is certainly only useful for web access.
Using GATEWAY_INTERFACE env var comes from tools/export.pl
Test plan :
- Use a dev install of koha installed in a user home, ie "/home/kohadev"
- Define a folder for template_cache_dir in etc/koha-conf.xml. For example : <template_cache_dir>/tmp</template_cache_dir>
- Check there is no cached templates already in this forder
- Create a file "bib.list" containing a few existing biblionumbers
- As user kohadev, launch : tools/export.pl --record-type=bibs --id_list_file=bib.list
- Look at cache folder
=> Without patch you see cache files owned by user kohadev
=> With patch there are no cache files
- Use the Koha interfaces OPAC and Intranet
=> Without patch you get an error : Template process failed: file error - cache failed to write ...
=> With patch you have no error and cache files are generated with Apache user as owner
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, good test plan!
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 8 Sep 2014 14:09:22 +0000 (16:09 +0200)]
Bug 12886: shelfbrowser script should write headers
opac/svc/shelfbrowser.pl does not write http headers.
On a production server, this patch resolves a server internal error
(500):
Bad header= <div id="shelfbrowser">
I did not reproduce on my local instance, but this should be fixed.
Test plan:
Verify there is no regression on browsing a shelf (with "en" and translated
templates)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 5304: GetItemsInfo() - moved issues and serials query from the results loop to the main query
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No commit message
No test plan.
No regressions found on opac/staff item display
No improvements either, but could be just my test data
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Tested detail and item pages in OPAC and staff, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 5304: Use branch codes from the database rather than hardcoded CPL and MPL
http://bugs.koha-community.org/show_bug.cgi?id=5304 Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No commit message
No test plan.
prove t/db_dependent/Items.t pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sun, 9 Nov 2014 22:58:03 +0000 (23:58 +0100)]
Bug 13133: Fix mangled titles on pay fines page
Titles with diacritics don't show correctly
on the 'pay fines' page in the patron account
in staff.
To test:
- Catalog or find a record with non-latin script
Something like a word in Hebrew would work.
- Create a fine entry for that record
Something like a rental fee works.
- Verify that the title doesn't display correct
on the pay fine page (other tabs are ok)
- Apply patch
- Check the pages again - display should be
correct now.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 12 Jun 2014 15:04:03 +0000 (17:04 +0200)]
Bug 12411: Preferences values should be utf8 encoded
Test plan:
Fill OPACMySummaryNote or NoLoginInstructions with something like "éàç"
and verify the display is broken.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described. Fixes the issue.
Kyle M Hall [Tue, 18 Nov 2014 14:17:40 +0000 (09:17 -0500)]
Bug 13286 - Checkouts table due date not updated when an item is renewed.
When an item is renewed from the checkouts table, the new due date is
displayed in the renewal column, but the old date due is still displayed
in the due date column. This should be updated as well.
Test Plan:
1) Apply this patch
2) Renew an item from the checkouts table
3) Note the date due is updated in the "Due date" column
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well in my test. My librarians will be grateful for the fix
-- they were complaining about this bug.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 3 Oct 2014 16:24:36 +0000 (12:24 -0400)]
Bug 11271 - Serials table off the screen in smaller viewports
When you search for serials in the Serials module the results table is
often too wide for the screen (depending on your browser window size).
This is partly due to the fixed width of the search fields in the table
footer.
This patch applies a flexible width to those <input>s and reduces the
font size of their text.
This patch also moves the "action" links for each table row into an
"action" menu (similar to the change made by Bug 10615 in Reports) to
further conserve screen space.
This patch also revises the page's DataTables configuration to use table
header classes for sorting configuration.
To test you should be able to perform a search which returns multiple
open and closed subscriptions.
- Test that table sorting works correctly, including for titles with
articles and for dates.
- Test that the Action menu items work correctly and that they correctly
reflect the permissions of the logged-in user with regard to
receive_serials and routing.
- Perform these tests on both the "Open" and "Closed" tabs.
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and improves the display significantly.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 13 Jun 2014 09:20:33 +0000 (11:20 +0200)]
Bug 12415: Fee receipt: a charges description should be displayed in all cases
Bug 2546 removes the description DB field value in some case (3.15.00.003).
But the receipt generated by scripts members/printfeercpt.pl and
members/printinvoice.pl displays this field.
When the description field is empty, the default value (based on
accountlines.accounttype) should be displayed.
Test plan:
- Generate and pay some different kinds of fees for a patron without
filling the 'description' field.
- In Fines>Account, click on the 'print' link.
- Before this patch, the "description of charges" values is empty if no
description was given.
It is a regression introduced by bug 2546, a default value was
inserted in the description field depending on the account type
selected.
- After this patch, the "description of charges" values should be based
on the account type. The string display on printing receipt should be
the same as on the account screen (staff and opac).
Note for QA: If removed the "payment" key, it is not used in template
and generated a warning ("odd number of elements...").
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This fixes the display of payments and other charges on the
fines slip.
Note: This patch fixes a line where the description in the
database was still updated to say "Payment thanks" for partial
payments. It might be worth to do a follow-up correcting the
accountlines table and removing the unwanted comment (see bug 2546).
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Stéphane Delaune [Fri, 14 Nov 2014 07:48:54 +0000 (08:48 +0100)]
Bug 13247 - Move opacuserjs at the end of opac-bottom.inc
This patch makes opacuserjs compatible with tracking tools like Piwik
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small change to enable use of opacuserjs for statistical
tools like Piwik by moving it right above </body>.
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 29 Oct 2014 17:03:50 +0000 (13:03 -0400)]
Bug 13162 - Label batch editor title sorting by default, rather then label number
The label batches editor has always sorted by the order the items were
added to a batch. However, it is now sorting by title. This should be
remedied.
Test Plan:
1) Create a label batch
2) Note the items are in order of title ( summary )
3) Apply this patch
4) Refresh the page, not the items are now sorted by label number
Tiny patch. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 7 Oct 2014 13:38:38 +0000 (09:38 -0400)]
Bug 13036 - Exclude control columns from sorting on staff client catalog detail page
The checkbox and "edit" column in the table of holdings on the
staff client detail page should be excluded from sorting since there is
no useful data to sort. This patch does so.
To test, view the detail page for a title which has multiple items.
Confirm that sorting works correctly.
Test under the following conditions:
- with the StaffDetailItemSelection system preference enabled and
disabled.
- as users who do and do not have cataloging item edit privileges
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as desrcibed, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 11 Nov 2014 16:09:17 +0000 (11:09 -0500)]
Bug 9177 - Duplicate patron: Prepopulated fields ar cleared when setting cursor
When adding a duplicated patron record some fields are prepopulated from
the original patron record. Focusing your cursor on these fields
automatically clears them. This works well if you assume that the user
only focuses on fields which should be changed. This works badly if you
consider that a user might want to tab between all fields. I think the
disadvantages outweigh the minor benefit of not having to delete the
contents of a field.
This patch removes the clearing action.
TEST PLAN
---------
1) Log in to staff client
2) Patrons
3) Find an existing patron
4) Click on the link in the Name column
5) Click on the Duplicate button
6) Click on fields with data in them.
-- they will clear, which is more problematic than correcting
the entry.
7) On the line
"Home > Patrons > {patron name} > Duplicate Adult Patron"
click the patron name to go back.
8) Click on the Duplicate button
9) Tab through the fields
-- the fields should remain unchanged, but sadly they clear.
10) Apply the patch
11) On the line
"Home > Patrons > {patron name} > Duplicate Adult Patron"
click the patron name to go back.
12) Click on the Duplicate button
13) Navigate through the fields
-- tabbing nor clicking should clear any fields.
14) Run koha qa tests
NOTE: Had to rebase again. Yes, bug 7878 interfered.
However, it deals with comment #6, which Owen
appropriately noted.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Less surprises, improves accessibility by enabling to
tab through the form without losing data.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Mon, 13 Oct 2014 14:20:21 +0000 (16:20 +0200)]
Bug 8337: Small typo in usage statement for longoverdue.pl
The charge with the replacement price will only be made if the charge
parameter matches the lost value. The given example is faulty (as well
as some of the code, as it appears ;)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Frédérick [Thu, 21 Mar 2013 21:51:46 +0000 (17:51 -0400)]
Bug 8337 System preferences for longoverdue cron
Patch to follow that adds 3 new system preferences to control the
parameters for the longoverdue script.
New prefs are DefaultLongOverdueChargeValue, DefaultLongOverdueLostValue
and DefaultLongOverdueDays.
These preferences are used when you call the longoverdue.pl script without
their parameters.
Sponsored-By: CCSR Signed-off-by: Leila and Fridos help <koha.aixmarseille@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 18 Sep 2014 08:23:47 +0000 (10:23 +0200)]
Bug 12775: Suggestions should be ordered by anyone
Currently only the suggestion manager can order from accepted
suggestion.
This patch set to default the ability to show all suggestions when
ordering from a suggestion.
2 links "show only mine" and "show all" permits to filter/show all
permissions.
Test plan:
Create an order from a suggestion and verify you are able to see all
suggestions by default.
Verify the "show only mine" link works as expected.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 17 Sep 2014 14:09:06 +0000 (10:09 -0400)]
Bug 12943 - Add patron branchcode to patron search results for holds
For some libraries, the current information specified in the patron
results when search for a patron to place hold is insufficient. These
libraries would like the branchcode to be added to the results to help
identify the correct patron.
Test Plan:
1) Apply this patch
2) Browse to the holds for a record
3) Search for patrons from the record holds screen
4) Note the patron results now have the branchcode after the patron type
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 17 Sep 2014 18:48:49 +0000 (14:48 -0400)]
Bug 12893 - 'Clear date' links on start and expiration hold date in staff not working
I introduced this bug with my patch for Bug 8181. In changing the way
the date picker widgets worked I changed the ID the "clear date"
javascript was looking for, so it stopped working.
This patch corrects it and improves the JavaScript by moving it out of
the HTML markup.
This patch also makes some minor HTML validity corrections: escaping
ampersands and removing a "size" attribute from a hidden form field.
To test, you should have the AllowHoldDateInFuture system preference
enabled. Place a hold in the staff client for a patron and confirm that
you can choose a "hold starts on" date and a "hold expires on" date and
that the respective "clear date" links work correctly for each one.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin SOMERS [Fri, 10 Jan 2014 10:52:22 +0000 (11:52 +0100)]
Bug 11515 - Encoding problem with OpacBrowseResults
When OpacBrowseResults syspref is on, the detail page contains a results browser.
When search terms contains non-ASCII character, the search query is not well encoded in this browser.
This patch adds the URI-coding to search terms into session to avoid any encoding problem with diacritics and URI specific characters like ?,& ...
So that TT parameter 'busc' is already URI encoded and can be used to recreate seach URL.
Test plan :
- Set OpacBrowseResults on
- At OPAC, perform a search with a diacritique. For example 'déjà'
- Go to detail page of a result
=> You see browser under "Browser results"
- Click on "Back to results"
=> You get same results and same search term with correct encoding
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug still present on master. I note that latin characters are taken by ISO-8859-1 encoding
(Perl's default) and that's why real UTF8 ones don't break (Perl notices they are UTF-8).
Jonathan Druart [Thu, 28 Aug 2014 10:39:44 +0000 (12:39 +0200)]
Bug 12840: The budgeted cost and the total are automatically calculated
Both of these 2 values should not be modified by the user.
Since these values depend on the discount and the quantity.
Test plan:
Verify you cannot modify the budgeted cost and the total price on
creating/modifying an order.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Thu, 9 Oct 2014 11:09:47 +0000 (13:09 +0200)]
Bug 13050: Follow-up for bug 12371
This patch simplifies the SQL query in Letters.pm for table
borrower_modifications.
It also addresses the only case this query is used in opac-memberentry.
An unused variable in Letters.pm is removed.
Test plan:
Enable selfregistration on opac.
Set verification by email to required in prefs too.
Self-register two new users.
Check the email notices generated.
Verify the new users with the tokens in their notice.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Much cleaner SQL
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Cleaner and works as described, no regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12909 - item withdrawn is missing in inventory results
In inventory results, CSV or screen, the item withdrawn information is missing.
This information can be usefull to understand why an item was not scanned.
Test plan :
- Check you have in default framework an item subfield mapped with items.withdrawn
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and withdrawn=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and withdrawn=1
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Submit
=> You see a column 'Withdrawn' with withdrawn value
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Export to CSV file'
- Submit
- Open exported file
=> You see a column 'Withdrawn' with withdrawn value
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 23 Sep 2014 18:41:06 +0000 (14:41 -0400)]
Bug 12981 - Patron attribute type limit by patron category not working on patron entry form
To reproduce this bug:
- Create a patron attribute type and limit it by patron category
- Create a new patron with that category
- Observe that there is no entry field for the patron attribute type you
created for that patron category. Inspecting the source should show
that the entry field has been hidden.
The patron entry form tries to hide patron attribute type input fields
based on the currently selected patron category. It does this based on
the value of $("categorycode"). However, instead of pulling the data
from the categorycode input in the body of the entry form, it pulls it
from the patron search box at the top of the page. The value of that
input is always empty because no category is preselected.
This patch corrects the problem by changing the ID of the categorycode
<select> in the body of the entry form and making corresponding changes
to the JavaScript which depends on it.
To test, apply the patch and load the patron entry form for a patron
category to which a patron attribute type has been limited. That patron
attribute entry field should appear correctly.
Choose a different patron category from the "Category" dropdown. Confirm
that the patron attribute entry field has been hidden.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 7 Oct 2014 14:01:12 +0000 (10:01 -0400)]
Bug 13037 - Staff client cart should exclude articles when sorting by title
This patch modifies the configuration of the staff client cart table
sorting to enable title sorting to ignore articles. Other column sorting
configuration settings are revised to use table header classes instead
of indexes.
To test, add multiple titles to the staff client cart, choosing several
titles which begin with articles ("a," "an," or "the" in English). View
the cart and test sorting of all columns. Sorting by title should sort
correctly while ignoring articles. Other columns should sort correctly
too.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Thu, 13 Nov 2014 17:49:42 +0000 (12:49 -0500)]
Bug 13151 - staff marc preview not wrapping
The MARC preview available on the staff client detail page doesn't wrap
long lines of text because it uses a huge block of whitespace-formatted
text in a <pre> tag. The OPAC doesn't have this problem because the MARC
preview is formated in a table.
This patch copies the OPAC's "plainMARC.xsl" file for use in the staff
client. The preview modal has been converted to use Bootstrap following
the method used in Bug 12755
To test, apply the patch and clear your browser cache. View the
detail page for a bibliographic record in the staff client. Click the
link to show the MARC preview. Confirm that the modal looks correct,
works correctly, and adapts gracefully to different browser widths.
Confirm that the MARC preview and Card links still work from Z39.50
searches.
Note: This patch assumes that UNIMARC records display correctly using
xslt/plainMARC.xsl. Please let me know if that is wrong.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm it works: nice modal dialog box; display aligned on opac display;
works also with Unimarc biblios.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12750: koha-create should be able to configure the Z39.50/SRU server
This patch adds two parameters to the koha-create command:
--enable-sru: makes the koha-create script enabled the SRU server for
the created instance
--sru-port: lets the user specify a desired port for the SRU server
to listen at. It defaults to 7090
To test:
- Apply the patch on top of master
- Build your own package and install / can be tested just using the koha-create
command on a 3.16+ packages install
- Create an instance as usual (i.e. without --enable-sru and --sru-port)
=> SUCCESS: The instance is created, the publicserver sections are
both commented out. The first publicserver section has 7090 set as the
listening port.
- Create an instance as usual, passing --sru-port 456
=> SUCCESS: The instance is created, the port is set but the publicserver sections
are commented out
- Create an instance with --enable-sru (with and without --sru-port)
=> SUCCESS: Verify the instance is created as expected, with the SRU server enabled
(port 7090 if no --sru-port passed, the one we chose otherwise).
- Verify that the docs also talk about this new parameters addition.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 20 Nov 2014 14:13:28 +0000 (15:13 +0100)]
Bug 13308: The output format should be 'iso2709' instead of 'marc'
In the template of the export tools, the value 'marc' is set for
the 'format' variable.
It should be 'iso2709'.
There was a mess in the tools/export.pl script.
2 variables did the same thing: $format and $output_format
This patch fixes that replacing $format with $output_format
Test plan:
Try to export biblio in iso2709 and csv using the export tools and from
the checkout list.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before applying the patch, attemping an MARC export from tools/export.pl
resulted in an error. After the patch the export works correctly.
Exports from the checkouts page also work correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. Also tested authority export.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 16 Oct 2014 14:29:11 +0000 (10:29 -0400)]
Bug 13099 - "Item hasn't been transferred yet" shows pickup branch rather than holding branch
The "Item hasn't been transferred yet" message on circulation.pl and
moremember.pl in the holds table shows the pickup branch rather than
holding branch.
Test Plan:
1) Place an item on hold for a patron
2) Check the item in to set the hold to waiting
3) Place an item level hold for another patron,
make the pickup location be a different library
4) Load the holds tab on the patron details page for the second patron
5) Note it says "Item hasn't been transferred yet from <Pickup Library>"
6) Apply this patch
7) Repeat step 4
8) Note the library listed is now the holding library
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 11 Nov 2014 13:40:36 +0000 (08:40 -0500)]
Bug 13229 - Suggestion date filters have a style problem
The suggestion date filters appear to be picking up a style change which
wasn't anticipated for the suggestions page markup. This patch solves
the problem by simplifying and standardizing the markup, including
simplifications to the label structure.
To test, apply the patch and view the suggestions management page in the
staff client. Expand the "suggestion information" filter section and
confirm that the label/input structure looks correct and works
correctly.
Signed-off-by: Blou <philippe.blouin@inlibro.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, looking better.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 19 Nov 2014 09:12:30 +0000 (10:12 +0100)]
Bug 13288: Fix filtering on the saved reports table
Since bug 12986 has been pushed, the tabs don't filter correctly the
table on the saved report list (reports/guided_reports.pl?phase=Use
saved
Test plan:
Go on Reports > Guided reports wizard > Saved reports
Verify the tabs work as expected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed problem and that the patch fixes it, passes tests
and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13281: t/ImportBatch.t shouldn't depend on the DB
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(1) Without this patch, but with the patch adding xt/sample_notices.sql:
prove xt/sample_notices.sql list all the above missing notices.
(2) Apply this patch. And do prove again: nothing is reported.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, test stop failing
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13199: Test incoherence between 'en' sample notices and translated notices
This test identifies incoherences between translated sample notices and the
'en' reference file.
Koha sample notices are loaded to 'letter' table from a text SQL file
during Koha installation by web installer. The reference file is the one
provided for English (en) installation :
Alternatives files are provided for other languages. Those files are difficult
to keep synchronized with reference file. This could be an functional issue
since some Koha operation depend on notice existence, for example Print Slip in
Circulation.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test works and identify missing notices
A few koha-qa errors fixed in followup
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Sat, 11 Oct 2014 14:23:44 +0000 (16:23 +0200)]
Bug 7878: (qa follow-up) Fix the sex default value
Without the previous patch, when you edited a patron, the "N/A" value
was selected for sex.
With, no checkboxes were selected.
This patch also replaces the
IF opduplicate do nothing ELSE do something END
statement with
UNLESS opduplicate do something END
which is more readable.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 24 Sep 2014 16:02:42 +0000 (12:02 -0400)]
Bug 7878 - When duplicating a patron too many fields carrying over
When duplicating a patron the resulting entry form contains the data
from the original patron in the following fields: Other names, Initials,
Gender, OPAC note, Staff note, and expiration date. These should be
blank for a new duplicated patron. This patch corrects this.
To test, locate or create a patron record which contains data in the
fields listed above. Duplicate that patron and confirm that those fields
are blank in the resulting patron entry form.
Confirm also that editing an existing patron with data in those fields
works correctly.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13279: t/Breeding.t shouldn't depend on the DB
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13280: t/Circulation_barcodedecode.t shouldn't depend on the DB
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13283: t/Overdues.t shouldn't depend on the DB
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13284: t/RotatingCollections.t shouldn't depend on the DB
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Wed, 20 Aug 2014 19:33:15 +0000 (15:33 -0400)]
Bug 12505 - Variable aqorders.listprice in acq claim notice doesn't work
Modified:
C4/Letters.pm - remove aqbooksellers.* from SELECT statement
In Letters - SendAlerts subrotine, is safe to remove aqbooksellers.* from SELECT statement
for type=claimacquisition or claimissues. Aqbooksellers is passed to GetPreparedLetter subrotine in tables variable.
Testing:
I Apply the patch
Select Tools -> Notices and slips;
Edit ACQCLAIM;
Add :
<order>Ordernumber <<aqorders.ordernumber>> (<<biblio.title>>) (<<aqorders.quantity>> ordered) ($<<aqorders.listprice>> <<aqbooksellers.listprice>> each) has not been received.</order>
Save modifications;
Create a vendor (Acquisition module);
Create an order (Acquisition module);
Click Acquisitions -> Late orders;
Select the order created;
Click Claim order button;
Valide <<aqorders.listprice>>;
Valide <<aqbooksellers.listprice>>.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. It's now possible to output the actual price
in the claim notice.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Thu, 13 Nov 2014 18:25:38 +0000 (13:25 -0500)]
Bug 12505 - Acq claim: Show error message when no order is selected
If no order is selected on the acq claim page when clicking
'Claim order' an ugly perl error message is displayed.
This patch corrects the behaviour to display a human readable
'No order selected'
instead.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reworded commit message to reflect what the patch achieves.
Works as described and passes tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Thu, 9 Oct 2014 14:54:28 +0000 (10:54 -0400)]
Bug 13055 - Show budget name when editing it
This patch adds the budget name to the page heading when editing a
budget. The patch also similarly corrects the page title during edit
operations and fixes some inconsistency in the breadcrumbs.
To test, edit an existing budget (Adminitration -> Budgets) and confirm
that page title, breadcrumbs, and heading look correct.
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Nice improvement, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sat, 15 Nov 2014 16:14:10 +0000 (17:14 +0100)]
Bug 13261 - Better check in message for patrons with indefinite restricition
This patch adds a better check in message for patrons with indefinite restriction.
To test:
Check out an item to a patron.
Add a manual restriction without expiry date to that patron.
Check in the item.
Without patch, the checkin message reads:
Reminder: Patron was earlier restricted until 9999-12-31
Apply patch and repeat steps above.
The message should now read:
Reminder: Patron has a restriction (no expiry date)
NOTE: Changed wording at two places following Owen's suggestion. New: "Patron
has an indefinite restriction"
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Thanks Marc for catching this case. I was thinking like you that the wording
sounded strange while playing with bug 13242. Merge the original patch and the
followup, containing a better wording, thanks to Owen comment.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 18 Nov 2014 15:42:32 +0000 (10:42 -0500)]
Bug 12701 - OPAC reading history still accessible by URL if turned OFF
If the opacreadinghistory system preference is turned off it is still
possible to navigate directly to the OPAC reading history page if you
know the URL. This patch adapts the fix for Bug 10595 (OpacTopissue page
still accessible when system preference is turned off) for
opac-readingrecord.pl
To test, log in to the OPAC and test the following conditions:
- With opacreadinghistory, navigating directly to
/cgi-bin/koha/opac-readingrecord.pl should trigger a 404 error.
- With opacreadinghistory turned on there should be a working link to
"your reading history" in the left-hand sidebar menu.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and passes tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 18 Nov 2014 14:52:48 +0000 (09:52 -0500)]
Bug 12703 - OPAC privacy page still accessible when the feature is turned off
If the OPACPrivacy system preference is turned off it is still possible
to navigate directly to the OPAC privacy page if you know the URL. This
patch adapts the fix for Bug 10595 (OpacTopissue page still
accessible when system preference is turned off) for opac-privacy.pl
Because the OPACPrivacy preference is irrelevant if opacreadinghistory
is not turned on, the patch adds a check for both to determine whether
the page should be accessible.
Log in to the OPAC and test under the following conditions:
- OPACPrivacy is turned off, opacreadinghistory is turned off. Navigate
directly to /cgi-bin/koha/opac-privacy.pl. You should get a 404
error.
- OPACPrivacy is turned off, opacreadinghistory is turned on. Navigate
directly to /cgi-bin/koha/opac-privacy.pl. You should get a 404
error.
- OPACPrivacy is turned on, opacreadinghistory is turned off. Navigate
directly to /cgi-bin/koha/opac-privacy.pl. You should get a 404
error.
- OPACPrivacy is turned on, opacreadinghistory is turned on. A link to
both "your reading history" and "your privacy" should appear in the
left-hand sidebar menu. Both pages should work.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and qa script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 14 Nov 2014 16:15:57 +0000 (17:15 +0100)]
Bug 13255: On-site checkout due date wrong if SpecifyDueDate is disabled
If you have the SpecifyDueDate preference disabled and check something
out as an on-site checkout the due date seems to follow the default
circulation rule rather than restricted the checkout to that day.
Test plan:
0/ Disable SpecifyDueDate and enable OnSiteCheckouts
1/ Check an item out to a patron and check the 'On-site checkout'
checkbox
2/ Verify (screen and DB) that the due date is correct (today 23:59)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13277: t/SuggestionEngine_AuthorityFile.t shouldn't depend on the DB
To reproduce:
- Stop your MySQL server:
$ sudo service mysql stop
- Run
$ prove t/SuggestionEngine_AuthorityFile.t
=> FAIL: some tests fail because of mysql stopped
To test (MySQL still stopped)
- Apply the patch
- Run
$ prove t/SuggestionEngine_AuthorityFile.t
=> SUCCESS: tests pass because the ycan be loaded regardless of
the absence of the DB server
- Sign off :-D
Regards
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Turned off MySQL and ran the tests before and after the patch.
Works as advertized.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Stop your MySQL server:
$ sudo service mysql stop
- Run
$ prove t/Search.t
=> FAIL: some tests fail because of mysql stopped
To test (MySQL still stopped)
- Apply the patch
- Run
$ prove t/Search.t
=> SUCCESS: tests pass because the ycan be loaded regardless of
the absence of the DB server
- Sign off :-D
Regards
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Turned off MySQL and ran the tests before and after the patch.
Works as advertised.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Galen Charlton [Mon, 26 May 2014 03:09:18 +0000 (03:09 +0000)]
Bug 12132: display guarantees if a patron has them, regardless of category type
If a patron has guarantees, always display them on the patron summary,
even if the patron is of a type that ordinarily would have them.
For example, at present you can cannot directly add a guarantee to
a staff record the way you can do for an adult patron, but if you create
a juvenile patron and add a guarantor to it, you can override that
restriction. Note that this patch ignores whether that is strictly
desirable behavior.
To test:
[1] Create a juvenile patron. While editing it, make a staff
account a guarantor of the new patron.
[2] View patron details for the staff account. Note that the
juvenile patron is not displayed as a guarantee.
[3] Apply this patch.
[4] Refresh details for the staff account. The juvenile should
now show up.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Galen patch works as described. The way it's implemented seems sensible.
Whatever the reason why a patron has guarantes, it make sense to display
them. So it's better to check the count of guarantes rather than the
current patron type to decide to display guarantes.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, small change, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Wed, 12 Nov 2014 16:02:00 +0000 (17:02 +0100)]
Bug 13223: [QA Follow-up] Trivial change to one POD line
The line referred to Plugin while it should be FrameworkPlugin.
(I renamed the module in the process but forgot this line.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Fri, 7 Nov 2014 14:45:08 +0000 (15:45 +0100)]
Bug 13223: Plugin housekeeping: do not redefine wrapper
This report is connected to bug 10480 which will change the general
mechanism of loading plugins, but can be tested independently and ahead
of that proposed change.
Several unimarc plugins use a wrapper sub. The code of this subroutine
is not exactly the same for all plugins: in some cases the routine is
extended for double character strings (dblspace and dblpipe). It would
not hurt to use the extended code for all plugins.
By moving the code to a module, we prevent redefinition
when two or more plugins are loading wrapper in a do-statement.
NOTE: You will not see wrapper redefine errors in your log, since the
plugins do not use the warnings pragma (yet). Since this patch touches
seventeen unimarc plugins, a unimarc signoff is preferred :)
Test plan:
Use some plugins changed in this patch (if not in use already).
Load the MARC editor.
Click on some tag editor-buttons to check unchanged behavior.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Unimarc plugins work as usual. No regression. Simple code
factorization.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log