Phil Ringnalda [Fri, 21 Jun 2024 19:20:05 +0000 (12:20 -0700)]
Bug 37152: Aquisitions basket and OPAC suggestion deletion should use the op cud-delete
Both deleting a basket in Aquisitions and deleting a suggestion in the OPAC
take care of the confirmation in a javascript modal, rather than having a
whole separate page for confirmation, so they should be using the op
cud-delete rather than either cud-delete_confirm (which shouldn't ever be
used) or delete_confirm (which they aren't doing, they already confirmed).
Test plan:
1. There's no wrong behavior to see, so apply patch and restart_all
2. Aquisitions - Vendor search for My Vendor - Click My Basket
3. Click Delete basket, in the popup again Delete basket
4. Click Show baskets for vendor My Vendor and verify the basket is gone
5. OPAC - Your account - Purchase suggestions
6. Create a suggestion, then click the checkbox for it, Delete selected,
confirm
7. Verify the suggestion was deleted
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Fri, 21 Jun 2024 19:05:11 +0000 (12:05 -0700)]
Bug 37152: Deleting patron categories doesn't warn about categories in use
You can't delete a patron category when it is in use, but because the
script which handles delete confirmation is expecting the wrong op,
cud-delete_confirm rather than delete_confirm, you don't get any warning,
just a failure to delete error message.
Test plan:
1. Without the patch, Administration - Patron categories
2. On the row for Staff, click Delete, Delete this category
3. Note an error message telling you to check the logs for details
4. Apply patch, restart_all
5. With the patch, repeat steps 1-2, note that instead of a button for
Delete this category you get a warning that it is in use
6. In the list of categories, row for Board, click Delete, Delete this category
7. Note that the (unused) Board category was deleted
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Fri, 21 Jun 2024 18:53:25 +0000 (11:53 -0700)]
Bug 37152: Deleting framework tags expects a cud-delete-confirm op instead of delete-confirm
The scripts for managing biblio and authority framework tag editing are
expecting an op of cud-delete-confirm, but the op that is passed is the
correct thing, delete-confirm, because it's a GET of a page where the
confirmation will happen, not the later cud- operation. You can only see
that the expected op is wrong because the confirmation page doesn't get
the description of the tag.
Test plan:
1. Without the patch, Administration - MARC bibliographic framework
2. Default framework Actions menu, MARC structure
3. In the row for 025, Actions menu, Delete
4. Note that the page which loads shows "Tag: 025" and "Description:"
without actually having a description
5. Administration - Authority types
6. Default authority type Actions menu, MARC structure
7. In the row for 046, Actions menu, Delete
8. Note that the page that loads shows "Tag: 046" without the tag description
9. Apply patch, restart_all
10. With the patch, repeat steps 1-8, but this time note that you see the
description of the tag, not just the number. For both, click Yes, delete,
and verify that the tag is deleted.
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Fri, 21 Jun 2024 18:38:10 +0000 (11:38 -0700)]
Bug 37152: Can't delete an Acquisitions contract
admin/aqcontract.pl expects the op cud-delete-confirm, but what's sent is
the op delete-confirm because it's just a GET of the page that will actually
do a cud op once it is confirmed.
Test plan:
1. Without the patch, Acquisitions - Vendor search for My Vendor
2. Left Sidebar menu - Contracts - Add a contract
3. Fill in Name, Start date, End date, Save
4. On the line for the contract, click Delete
5. Note that the page that loads has no button for "Yes, delete contract"
(or for anything else)
6. Apply patch, restart_all
7. Acquisitions - Vendor search for My Vendor
8. Left Sidebar menu, Contracts, click Delete, then Yes, delete contract
9. Vendor search for My Vendor, Left Sidebar Contracts, verify the contract
is gone
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Hammat Wele [Thu, 4 Jan 2024 13:28:10 +0000 (13:28 +0000)]
Bug 33317: (follow-up) Perltidy
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Hammat Wele [Fri, 10 Nov 2023 19:48:21 +0000 (19:48 +0000)]
Bug 33317: Using checkoxes in OpacMetaRobots preference system to prevent incorrect data entry
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 33317: Add system preference to set meta robots for the OPAC
Websites must have a robots meta tag to improve search engine crawling,
so we could tell search engines to not index OPAC pages for example.
To test:
1) Look at opac-main source and see that meta name=robots is missing.
2) Apply patch.
3) Run ./installer/data/mysql/updatedatabase.pl
4) Go to system preferences > OPAC and add some directives to
OpacMetaRobots (ex: noindex,nofollow).
5) Look at opac-main source and confirm that meta name=robots now has
content equal to the text set in the OpacMetaRobots system
preference.
6) This should Prevent search engines from indexing Opac pages (if
OpacMetaRobots is set to noindex)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Nind [Sun, 19 May 2024 02:56:56 +0000 (02:56 +0000)]
Bug 32313: Update guided reports column descriptions for items and biblioitems tables
This adds missing column descriptions to the items and biblioitems
tables (used in guided reports for the Circulation, Catalog,
Acquisitions, and Serials modules).
It also updates some existing descriptions for consistency, removes
biblioitems columns that no longer exist, and sorts items and statistics
descriptions in the source file in alphabetical order.
Test plan:
1. Go to Reports > Guided reports > Create guided report.
2. Choose 'Catalog' for the module to report on, and then select
'Next'.
3. Choose 'Tabular' for the type of report and select 'Next'.
4. Note that there are no descriptions for these column names
(proposed column names shown in brackets):
- items.itemnumber (Koha item number (autogenerated))
- items.biblionumber (Biblio number (internal))
- items.bookable (Bookable)
- items.localuse (Total local uses)
- biblioitems.ean (EAN)
- biblioitems.collectiontitle (Series statement)
- biblioitems.collectionissn (Series ISSN)
- biblioitems.collectionvolume (Series volume)
- biblioitems.editionstatement (Edition statement)
- biblioitems.editionresponsibility (Edition responsibility)
- biblioitems.cn_source (Source of classification or shelving scheme)
- biblioitems.cn_class (Classification part)
- biblioitems.cn_item (Item part)
- biblioitems.cn_suffix (Call number suffix)
- biblioitems.cn_sort (Koha normalized classification for sorting)
- biblioitems.totalissues (Koha issues (borrowed), all copies)
5. Apply the patch.
6. Restart all the things (restart_all).
7. Reload the page.
8. Note that there are now descriptions for the columns in step 4.
9. Note that the descriptions for these columns are changed (for
consistency with other tables, or clarification):
- items.itype => Koha item type (previously Koha itemtype)
- items.timestamp => Modification date (previously Timestamp)
- biblioitems.timestamp => Modification date (previously Timestamp)
- biblioitems.illus => Other physical details (previously
Illustrations)
- biblioitems.biblioitemnumber => Biblio item number (internal)
(previously Biblioitem number)
- biblioitems.biblionumber (and also acqorders.biblionumber and
biblio.biblionumber) => Biblio number (internal)
(previously Biblio number)
10. Sign off :D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Eric Garcia <cubingguy714@gmail.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Alex Buckley [Mon, 13 May 2024 18:13:07 +0000 (18:13 +0000)]
Bug 36727: Add new issn-all Elasticsearch index for MARC21
- This index searches 022ayz, 023ayz (MARC21) and 011ayz (UNIMARC).
- 011y and 011z have been removed from issn search field for UNIMARC.
- 022yz and 023yz have also been added to the identifier-standard search field
Test plan:
1. Start up KTD with Elasticsearch: ktd --es8 up
2. Add a new biblio record putting the value '0046-2254' into the incorrect ISSN subfield (022y /023y for MARC21, or 011z for UNIMARC)
3. Do a biblio search for '0046-2254' and confirm no results are returned
4. Apply this patch and restart all services (restart_all)
5. Reset the mappings: Administration > Catalog > Search engine configuration (Elasticsearch) > Reset mappings (at the bottom of the page)
6. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
7. Alternative to steps 5 and 6: reset_all
8. Repeat the biblio search for '0046-2254' and confirm you get a result
Sponsored-by: Education Services Australia SCIS Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 6 Jun 2024 10:27:33 +0000 (11:27 +0100)]
Bug 37003: Add the 24.11 release team
This patch updates the teams.yaml to include the voted in 24.11
release team.
Test plan
1/ Check against https://wiki.koha-community.org/wiki/Release_Teams
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Sat, 22 Jun 2024 18:58:41 +0000 (11:58 -0700)]
Bug 37078: Damaged status not showing in detail.pl
The API returns the fact that an item is damaged in 'damaged_status' but the
code that builds the holdings table is looking for 'damaged' so it doesn't
find that an item is damaged.
Test plan:
1. Administration - Authorized values - DAMAGED row, click Add
2. Give it the Authorized value 2 and the Description Awful
3. On a record with more than one item, like Empress of the blues,
edit one item to have Damaged status: Damaged and one to have
Damaged status: Awful
4. On the bib detail view, note that the status column shows both
as 'Available'
5. Apply patch, refresh
6. Note that now one shows as Damaged and one as Awful (verifying that
the value is being read from the AV, not the fallback default which
is also 'Damaged')
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Brendan Lawlor [Mon, 24 Jun 2024 14:54:05 +0000 (14:54 +0000)]
Bug 37059: Fix insert button in notices and slips
This patch fixes the insert button in notices and slips. The container id needed to be appened with '_panel'
To Test:
1. Edit any notice or slip and try to use the insert button
2. Nothing happens
3. Apply patch and refresh the browser
4. Edit any notice or slip and use the insert button
5. Confirm the parameters are inserted into the tempalte as expected.
Signed-off-by: Eric Garcia <cubingguy714@gmail.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Fri, 14 Jun 2024 14:29:34 +0000 (10:29 -0400)]
Bug 37091: Correct op parameter in systempreferences.pl
To test:
1. Go to Administration > System Preferences > Local Use
2. Attempt to delete a local system preference
--> The confirmation page displays a blank name and value
3. Click "Yes, delete"
--> The system preference is still there
4. Apply patch, restart_all, and reload page
5. Attempt to delete the system preference again
--> The confirmation page displays correct information
6. Click "Yes, delete"
--> The system preference is deleted successfully
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Fri, 14 Jun 2024 15:13:26 +0000 (16:13 +0100)]
Bug 37047: (QA follow-up) Move non-bookings code back
We inadvertantly adding a little more than just the bookings table js
into it's own asset. This patch moves that code back and also renames
the asset file to /tables/bookings.js from /bookings-table.js as is the
scheme we're attempting to follow now (see '/modals/').
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Wed, 12 Jun 2024 11:42:24 +0000 (11:42 +0000)]
Bug 37047: Make use of DRY bookings-table.js in moremember.tt
Test plan:
No functionality change, follow the original test plan and make sure the
table is displayed correctly on both screens:
<intra>/cgi-bin/koha/circ/circulation.pl?borrowernumber=
<intra>/cgi-bin/koha/members/moremember.pl?borrowernumber=1
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Wed, 12 Jun 2024 11:39:56 +0000 (11:39 +0000)]
Bug 37047: Move bookings table JS table to its own file
For reusability
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sam Lau [Tue, 11 Jun 2024 16:39:05 +0000 (16:39 +0000)]
Bug 37047: Make Patron Bookings table visible from Patrons Checkout page
This patch makes it so that the patron bookings table loads properly from teh checkout page. Previously, it was only loading correctly from the details page.
To test:
1. Create an item bookable.
2. Book an item for a patron.
3. Go to the patron's checkout page.
4. See they have a Booking (1) in their tab.
5. Click this tab, but nothing appears.
6. Apply patch, restart_all
7. See they still have a Booking (1) in their tab.
8. Click this tab, table loads as expected.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 30 Apr 2024 17:56:13 +0000 (17:56 +0000)]
Bug 36651: Add placeholder text to the search bar in the OPAC
This patch adds placeholder text to the OPAC search bar, with JavaScript
to change the placeholder based on the user's search type selection.
To test, apply the patch and go to the OPAC.
- The search bar should by default have the placeholder "Search the
catalog by keyword"
- Change the search type (Author, Title, etc). The placeholder text
should change accordingly.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
APPLY PATCH and restart_all
1. Have a patron with and some holds and different priority.
2. Go to the patron account and click Print > Print summary
3. Notice the new holds priority column.
Note: Table settings don't work on these tables. See Bug 36475. Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Mon, 20 Nov 2023 13:51:22 +0000 (13:51 +0000)]
Bug 35153: Convert IntranetmainUserblock system preference to additional contents
This patch moves the IntranetmainUserblock system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the IntranetmainUserblock
system preference before applying the patch. Apply the patch and run
the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from IntranetmainUserblock is now stored there.
- The HTML customization entry form should offer IntranetmainUserblock
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the IntranetmainUserblock HTML customization and add unique
content to the "fr-FR" tab.
- Go to the staff client home page. You should see the
content you added to the IntranetmainUserblock HTML customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"IntranetmainUserblock." It should return no results.
Sponsored-By: Athens County Public Libraries Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Nind [Sat, 15 Jun 2024 10:10:36 +0000 (10:10 +0000)]
Bug 34706: Fix capitalization - Cas to CAS
CAS is an abbreviation and should use capital letters.
Test plan:
1. Enable the casAuthentication system preference.
2. Logout and view the login form.
3. Note that it says "Cas login".
4. Apply the patch.
5. Refresh the login page.
6. Note that it now says "CAS login".
7. Sign off.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Wed, 5 Jun 2024 15:48:43 +0000 (15:48 +0000)]
Bug 37036: Pass along the branches table for auto renewals
To test:
1. Set up autorenewals bu adjusting circulation rules:
'Automatic renewal' -> 'Yes'
'No automatic renewal before' -> 5
2. Set 'AutoRenewalNotices' to 'according to patron messaging preferences'.
3. Set an AUTO_RENEWALS and AUTO_RENEWALS_DGST notice to include branch info. I am using this to test:
4. Make sure your branch has the proper infro. filled out in Libraries administration.
5. Find a patron and adjust the messaging preferences so they receive automatic renewal notices. Also make sure the patron has an email.
5. Check out some items and make them due with the next 5 days.
6. Run the automatic_renewal cron job:
7. Notice no branch information displays.
8. APPLY PATCH
9. Checkout items from multiple issuing branches to a single patron.
10. Make sure the patron's messaging prefs are set to revieve NON-digestable notices.
11. Run the automatic renewal job, each notice should include the branch information from the issuing library.
12. Change the patron's messageing preferences to receieve digestable notices.
13. Run the job without the --digest-per-branch flag. You should get a single notice with the branch info. coming from the patron's home branch.
14. Run the job with the --digest-per-branch flag. You should get seperate digested notices with the branch info. coming from the issueing library branch.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 30493: Pending archived suggestions appear on intranet home page
If suggestions are archived before their status is changed to something other than "Pending", they still appear on the intranet home page and the acquisitions home page as suggestions to be managed.
WITHOUT PATCH:
1. Go to Acquisitions > Suggestions
2. Click on New purchase suggestion
3. Fill in the form (title only is fine)
4. Click on Submit your suggestion
5. Go to the home page (click the Koha logo)
--> Notice it says that there is 1 pending suggestion
6. Go to Acquisitions
--> Notice it says that there is 1 pending suggestion
7. Go to Suggestions
8. Click on the up arrow to the right of the Edit button and choose Archive
--> There are no more pending suggestions
9. Go to the home page (click the Koha logo)
--> Notice it says that there is 1 pending suggestion
10. Go to Acquisitions
--> Notice it says that there is 1 pending suggestion
The search function was fetching suggestions without considering the
"archived" field. I now pick only suggestion that are pending AND not
archived.
WITH PATCH:
9. Go to the home page (click the Koha logo)
--> Notice it says that there is no pending suggestion
10. Go to Acquisitions
--> Notice it says that there is no pending suggestion
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Andrii Nugged [Mon, 3 Jun 2024 00:50:24 +0000 (03:50 +0300)]
Bug 37014: Fix after-modal-POST to transmit "not_returned" message
The bug report addresses an issue where the message "Item was not checked in" erroneously appears during the second POST after a manual or modal check-in process.
1. In circ/returns.pl:
- Introduced a new hash `%rinot_returned` to track items not returned across pages.
- Updated the logic to capture the "not returned" status from the query parameters.
- Adjusted the input processing loop to include `not_returned` status.
- Modified the section handling barcode check-ins to appropriately initialize and update the `not_returned` status.
2. returns.tt:
- Added hidden input fields in the template to include `not_returned` status in the form submissions.
The changes ensure that the "not_returned" status is correctly tracked and displayed, preventing the erroneous message from appearing on subsequent POST requests.
1. Perform a manual check-in of an item, but make some warning modal appear: for ex., transfer: check-in the item in not home library.
2. Press OK on the modal. There will be a POST transition again to redraw the checked-in items list.
3. Verify that the "Item was not checked in" message appears erroneously near the item's row.
4. Apply the patch.
5. Repeat steps 1-3 and check that there will be no erroneous "Item was not checked in" message.
Signed-off-by: Tadeusz „tadzik” Sośnierz <tadeusz@sosnierz.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Tue, 28 May 2024 10:39:33 +0000 (10:39 +0000)]
Bug 36956: Allow all providers to be displayed in reports
This patch fixes an incorrect usage of the API which was only returning 20 results.
Test plan:
1) Go to ERM module and make sure you have more than 20 data providers stored in your database.
1) (Optional) Run the following command (k-t-d) to create 21 data providers:
perl -MKoha::Database -e '
my $schema = Koha::Database->schema;
$schema->resultset("ErmUsageDataProvider")->create({
name => "name ".$_
}) for (1..21)
'
2) Go to eUsage / reports and create new report (cgi-bin/koha/erm/eusage/reports)
3) Check that only the first 20 data providers are displayed in the drop down
4) Apply patch
5) yarn build or reset_all to rebuild the javascript
6) Repeat steps 1-3, all providers should now be displayed
PA amended patch: Updated commit message test plan
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 20 Jun 2024 10:05:07 +0000 (11:05 +0100)]
Bug 36428: (QA follow-up) Remove filter_by_future
I actually already started to remove this in another bug, but it makes
sense to do it here where we're introducing the 'active' filter. I'm in
agreement that this should probably always have been an 'active' rather
than 'future' filtering.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 31 May 2024 11:13:23 +0000 (11:13 +0000)]
Bug 36428: Add Bookings->filter_by_active and use it for display
Currently the bookings tab on a biblio details and patron details use 'filter_by_future'
which lists upcoming bookings.
Libraries would like to see upcoming, and active bookings in these cases, and we should add a filter
for bookings that have not ended.
NOTE: This removes the only uses of filter_by_future, but I preserve this for Martin's decision as the creator
of the bookings module
To test:
1 - Make an item bookable from the items tab on a record details
2 - Return to details view and place a booking
3 - Note sidebar says "Bookings (1)"
4 - Make the booking current from the DB:
UPDATE bookings SET start_date=NOW() WHERE biblio_id={biblionumber};
5 - Reload the page
6 - Note the count is now "Bookings (0)"
7 - View the patron's details page - note "Bookings (0)" and none listed
8 - Apply patch
9 - Reload biblio details, note Bookings(1)
10 - Reload patron details, note Bookings(1) and booking is listed
11 - End the booking:
UPDATE bookings SET end_date=NOW() WHERE biblio_id={biblionumber};
12 - Confirm booking no longer listed on biblio or patron details
Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Adolfo Rodríguez [Thu, 30 May 2024 10:07:21 +0000 (12:07 +0200)]
Bug 36984: Fix "Transit pending from..." message in bibliographic record detail page
Transfering a rotating collection will mark the items contained in the collection as "Transit pending..." and it will trigger a javascript error in the bibliographic record detail page that breaks the holdings table, leaving it caught in the "Processing..." message. This patch fixes that.
The javascript messages gives this error in the console tab:
Uncaught TypeError: Cannot read properties of undefined (reading 'str')
The error comes from using from_library_ insted of from_library in the file koha-tmpl/intranet-tmpl/prog/en/includes/html_helpers/tables/items/catalogue_detail.inc
Test plan:
1 Create a rotating collection
2 Add at least an item to the collection
3 Transfer the rotating collection
4 Check the detail page of the bibliography record of any of the items that belong to that collection in the Intranet. Notice that the holdings table gets stuck "Processing..." and that there is a Javascript error
5 Apply patch, restart services
6 Repeat step 4. Now the holdings tab works as intended and the item from the collection shows up with the text "Transit pending from..." in the Status column
7 Sign off
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Tue, 11 Jun 2024 12:36:15 +0000 (12:36 +0000)]
Bug 37069: OPAC authorities search is stateless
This patch removes cud- from the search op and chanegs the form
submission to GET
To test:
1 - Search authorities on OPAC for 'a'
2 - Click page 2
3 - You get the search form
4 - Apply patch, restart all
5 - Repeat search, confirm it works
6 - Click page 2
7 - Confirm you get next results
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Wed, 19 Jun 2024 16:58:18 +0000 (09:58 -0700)]
Bug 37127: Authorized value select not working on authority forms
Linking an authority subfield to an authorized value just leaves a blank
in the form rather than creating a <select>, because there's a stray cud-
in the type returned from build_authorized_values_list.
Test plan:
1. Without the patch, Administration - Authority types - Actions menu for
Default - MARC Structure
2. Actions menu for 040 - Subfields
3. Edit subfields - Tab b - Authorized value - set to LANG - Save changes
4. Authorities - New authority - Default
5. In 040 tag, click CATALOGING SOURCE to expand the tag
6. Note that subfield b has a blank space rather than a dropdown menu
7. Apply patch, restart_all
8. Authorities - New authority - Default
9. In 040 tag, click CATALOGING SOURCE to expand the tag
10. Note that subfield b has a dropdown menu listing language names
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Wed, 19 Jun 2024 17:45:18 +0000 (10:45 -0700)]
Bug 37129: Patron attributes linked to an authorized value don't show a select menu in batch modification
Test plan:
1. In Administration - Patron attribute types verify you have the default
SHOW_BCODE using the YES_NO authorized value
2. Tools - Batch patron modification, add a patron card number or
borrowernumber and continue
3. For Patron attribute select Show barcode on the summary screen item
listings, and note that you get a blank text input rather than a select
menu with Yes and No choices
4. Apply patch, restart_all
5. Repeat step 2 and 3, but note that you now get a Yes/No select menu
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Fri, 14 Jun 2024 14:03:22 +0000 (10:03 -0400)]
Bug 37089: cud-delete_confirm should not be cud
Adjust aqbudgets.pl and currency.pl to check for the correct op value
To test:
Part 1 - Delete a fund
1. Go to Acquisitions > Funds
2. Try to delete a fund
--> Confirmation page shows fund name as '' and fund amount as 0.00
3. Click "Yes, delete this fund"
--> The fund is still there
Part 2 - Delete a currency
3. Go to Acquisitions > Currencies
4. Try to delete a currency
--> Confirmation shows empty values for currency and rate
5. Click, "Yes, delete this currency"
--> An error message appears and the currency is not deleted
6. Apply patch and restart_all
7. Repeat steps 1-5
--> Confirmation pages display correct information, and deletions
occur successfully
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 13 Jun 2024 02:25:14 +0000 (19:25 -0700)]
Bug 37080: Cannot delete MARC bibliographic frameworks or authority types
The scripts for managing both bib and authority frameworks are now expecting
an op 'cud-delete_confirm' but delete_confirm isn't cud, it's just a GET of a
page asking if you are sure. The scripts just need to expect the op they are
actually getting, delete_confirm.
Test plan:
1. Administration - MARC bibliographic framework - New framework
2. Give the framework any code and description and Submit
3. Actions menu for your new framework - Delete
4. Note the message says 'Confirm deletion of framework '' ()?" rather than
having the code and description included.
5. Click Yes, note that deleting failed
6. Administration - Authority types - New authority type
7. Give the authority type any type and description and Submit
8. Actions menu for your authority type - Delete
9. Note the message again says '' () rather than 'desc' (FOO)
10. Click yes, note that deleting failed
11. Finally! Apply patch, reset_all
12. Repeat steps 1-10, this time noting that you get 'desc' (FOO) rather than
'' (), and that deleting works.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Fri, 14 Jun 2024 14:16:47 +0000 (10:16 -0400)]
Bug 37090: Correct op parameter in edi_accounts.pl
To test:
1. Go to Acquisitions > EDI Accounts
2. Create an EDI account if one is not already there
3. Try to delete the EDI account
--> Page refreshes and nothing happens
4. Apply patch, restart_all, and refresh the page
5. Try to delete the EDI account again
--> A confirmation page displays with correct information
6. Click "Yes, delete"
--> The EDI account is deleted
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Wed, 12 Jun 2024 13:05:53 +0000 (09:05 -0400)]
Bug 37075: Message queue processor will fail to send any message unless letter_code is passed
For reasons unknown, GetOptions is inserting an empty string into the letter_code list. If you are running the script with a letter code filter, the empty string is added to the OR so it functions. If no letter_code is passed, the search requires the letter code to be an empty string, which will of course fail. Even more perplexing is that this does not happen for the type list which is essentially identical code.
Test Plan:
1) Generate some messages in the message queue
2) Run `process_message_queue.pl -v -c`
3) Note nothing happens
4) Apply this patch
5) Repeat step 2
6) Messages are sent!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 16 May 2024 09:25:34 +0000 (09:25 +0000)]
Bug 36875: (follow-up) Modify query in translated_content
This removes the MySQLism for FIELD(..).
In this case we just want to get the non-default records in
the front. So we can just test lang=default. And prevent inserting
$lang in the expression. And so prevent execution in ORDER BY.
No longer needing the ->quote call too.
Test plan:
Run Koha/AdditionalContents.t again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 16 May 2024 08:41:19 +0000 (08:41 +0000)]
Bug 36875: Unit test
Test plan:
Run Koha/AdditionalContents.t without next patch.
Should fail on the sleep execution.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 16 May 2024 07:33:41 +0000 (07:33 +0000)]
Bug 36875: Staff counterpart
Same change.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 16 May 2024 07:19:30 +0000 (07:19 +0000)]
Bug 36875: Do not pass unsanitized language to $page->translated_content
Test plan:
Try to access opac-page.pl with a language not in OPACLanguages.
Verify that this 'language' was not passed to sql. Simplest perhaps
by debugging AdditionalContent.pm. Something like:
sub translated_content {
my ( $self, $lang ) = @_;
+warn "L137: $lang";
Now have a public additional_contents page and hit it:
/cgi-bin/koha/opac-page.pl?page_id=5&language=badsql
Check your log and find:
[2024/05/16 07:25:53] [WARN] L137: en at [etc] line 137.
So badsql was caught.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Chris Cormack [Wed, 8 May 2024 22:41:43 +0000 (22:41 +0000)]
Bug: 36818 Escape characters in file names uploaded
To test:
1/ create a file named something like 'execute`curl blog.bigballofwax.co.nz`.zip'
Where the domain is one you can watch the logs from
2/ Upload this file as a cover image
3/ Check /var/lib/koha/sitename/tmp/koha_sitename/ and see unescaped filenames
4/ Choose process, check the logs of the webserver see the connection has been made
5/ Apply the patch
5/ Repeat 2 & 3 and see the filename is now escaped
6/ Choose process and check no errors but no no remote execution occurs
7/ Test uploading actual zip file and images still works
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Chris Cormack [Mon, 13 May 2024 02:26:13 +0000 (02:26 +0000)]
Bug 36520: Sanitize input in opac-sendbasket.pl
To test
1/ Add some items to your cart in the opac
2/ Choose send cart
3/ Open firefox developer tools and switch to the network tab
4/ Send cart
5/ In the network tab, find the post request and choose copy as curl
6/ Edit the curl command to add )+AND+(SELECT+1+FROM+(SELECT(SLEEP(6)))x)--+- to the bib_list parameter
7/ Run the curl notice it takes a long time to respond, if you want to check run the curl without the above part added
8/ Apply the patch and restart plack
9/ Run the modified curl and notice no longer the slow down
10/ Test in browser and make sure the basket is still sent
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Mon, 13 May 2024 12:47:28 +0000 (14:47 +0200)]
Bug 36520: Prevent SQL injection in GetPreparedLetter
Actually in _get_tt_params
The following query will delay the response
SELECT `me`.`biblionumber`, `me`.`frameworkcode`, `me`.`author`, `me`.`title`, `me`.`medium`, `me`.`subtitle`, `me`.`part_number`, `me`.`part_name`, `me`.`unititle`, `me`.`notes`, `me`.`serial`, `me`.`seriestitle`
, `me`.`copyrightdate`, `me`.`timestamp`, `me`.`datecreated`, `me`.`abstract`
FROM `biblio` `me`
WHERE `biblionumber` = '1) AND (SELECT 1 FROM (SELECT(SLEEP(6)))x)-- -'
ORDER BY field( biblionumber, 1 ) AND (
SELECT 1
FROM
SELECT SLEEP( 6 ) x
) -- - )
To test
1/ Add some items to your cart in the opac
2/ Choose send cart
3/ Open firefox developer tools and switch to the network tab
4/ Send cart
5/ In the network tab, find the post request and choose copy as curl
6/ Edit the curl command to add )+AND+(SELECT+1+FROM+(SELECT(SLEEP(6)))x)--+- to the bib_list parameter
7/ Run the curl notice it takes a long time to respond, if you want to check run the curl without the above part added
8/ Apply the patch and restart plack
9/ Run the modified curl and notice no longer the slow down
10/ Test in browser and make sure the basket is still sent
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 15 May 2024 09:25:47 +0000 (11:25 +0200)]
Bug 36520: Add tests
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36575: (QA follow-up) Shibboleth POD and checkpw_internal call
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 24 Apr 2024 15:06:22 +0000 (15:06 +0000)]
Bug 36575: Adjust checkpw_internal to return patron
This patch refactors checkpw_internal to remove the SQL code, use patron ojbects, and return the
patron that correctly matches the userid/caerdnumber when auth is successful
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 24 Apr 2024 14:25:40 +0000 (14:25 +0000)]
Bug 36575: (bug 34893 follow-up) Return patron when autocreating in Shibboleth
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 24 Apr 2024 14:23:51 +0000 (14:23 +0000)]
Bug 36575: (bug 34893 follow-up) Return patron from LDAP
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 11 Apr 2024 10:18:30 +0000 (12:18 +0200)]
Bug 36575: (QA follow-up)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 11 Apr 2024 09:39:03 +0000 (09:39 +0000)]
Bug 36575: Return correct patron when there is a shared userid / cardnumber
This patch moves some patron fetching code in C4/Auth to use to patron returned from the validation
methods and only try to fetch the patron (to check if locked, update attempts, etc) if we didn't authenticate
To test:
1 - Set a user to have userid = BANANA password = Password1
2 - Set a user to have cardnumber = BANANA password = Password2
3 - Hit the patron authentication API:
http://localhost:8080/api/v1/auth/password/validation
with data:
{ "identifier": "BANANA", "password":"Password1" }
and:
{ "identifier": "BANANA", "password":"Password2" }
4 - Note you receive the same response for both
5 - Apply patch, restart all
6 - Repeat the API and confirm you get the correct patron for the password submitted
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Wed, 12 Jun 2024 19:40:03 +0000 (19:40 +0000)]
Bug 36459: Do not duplicate duedatespec IDs
To test;
1. Go to circ/circulation.pl and check an item out to a patron.
2. Backdate it to sometime in the past using the "Specify due date
(MM/DD/YYYY) : " input
3. A modal appears to "Please confirm checkout". The date is no longer
populated in that field.
4. You must add the date again here.
5. APPLY PATCH
6. Try again and this time the confimration date should be set
correctly.
7. Follow the test plan from Bug 18885 to make sure on site checkouts
still work correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch moves the 'PlaceHoldsOnOrdersFromSuggestions' system preferences
from the Acquisitions->Printing section to the Circulation->Holds Policy section.
To test:
1) Go to Admin->System Preferences and search for 'PlaceHoldsOnOrdersFromSuggestions'
2) Note that it is located in the Acquisitions prefs, under the Printing subheading
3) Apply patch
4) search for the preferences again
5) Note that it is now located in the Circulation preferences under the Holds Policy subheading
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Magnus Enger [Thu, 6 Jun 2024 13:12:29 +0000 (15:12 +0200)]
Bug 36330: Follow up, change comments in the DB
This patch updates the comments of course_items.location and
course_items.enabled to say "reserve" instead of "reseve".
To test in ktd:
- sudo koha-mysql kohadev
- Run: "SHOW CREATE TABLE course_items;"
- Verify the comments of "location" and "enabled" contains
"reseve" instead of "reserve"
- Make a note of the definitions of these two columns
- Run the atomicupdate: "sudo koha-upgrade-schema kohadev"
- Log into the database again and run the same command as above
- Verify the comments now say "reserve" instead of "reseve"
- Make sure the column definitions are otherwise identical to
the ones you saw before the upgrade. Only the spelling of
"reserve" in the comment should be changed.
Signed-off-by: David Nind <david@davidnind.com>
Removed unnecessary line of debug output. 2024-06-10 Magnus Enger
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Alex Buckley [Thu, 21 Mar 2024 23:49:09 +0000 (23:49 +0000)]
Bug 36330: Change 'reseve' to 'reserve'
Test plan:
1. git grep 'reseve'. Notice there are instances of 'reseve'
2. Apply patch
3. Repeat step 1, there should be no instances of 'reseve'
Sponsored-by: Catalyst IT, New Zealand Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Brendan Lawlor [Thu, 6 Jun 2024 13:14:43 +0000 (13:14 +0000)]
Bug 35294: Fix typos in catalogue code comments
Test plan:
1. git grep -n -E 'barocode|preproccess' to find the files and line # of typos
2. Apply the patch
3. git grep -E 'barocode|proccess'
4. See no results
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Nind [Tue, 4 Jun 2024 01:57:37 +0000 (01:57 +0000)]
Bug 25520: Fix the SMS number input hint on the OPAC messaging page
This makes the hint when entering an SMS number on the OPAC messaging
settings page the same as the staff interface hint: "Please enter
numbers only. Prefix the number with + or 00 if including the country
code." For some countries using either +XX or 00XX are accepted,
for example: +49 or 0049.
Test plan:
1. Set the SMSSendDriver system preference to Email
2. View the current hint for entering an SMS number in the staff
interface:
2.1 Go to Patrons > + New patron > Patron.
2.2 Scroll down to the 'Patron messaging preferences' section at the
end of the page.
2.3 Note that the hint is "Please enter numbers only. Prefix the
number with + or 00 if including the country code.".
3. View the current hint for entering an SMS number in the OPAC:
3.1 Go to the OPAC > Your account (log in if required).
3.2 Select the 'Messaging' tab/section.
3.3 Note that the hint is "Please enter numbers only. Prefix the
number with + if including the country code.".
3.4 The difference: "..or 00.." is missing.
4. Apply the patch.
5. Refresh the OPAC messaging page.
6. The hint text for the OPAC is now the same as the staff interface.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Nind [Fri, 31 May 2024 21:19:57 +0000 (21:19 +0000)]
Bug 36922: Patron attributes - update hint text for "Is a date"
The date field for patron attributes is now repeatable (enhancement made
in Koha 24.05 with bug 32610). This updates the hint text to reflect
the change.
Test plan:
1. Go to add a patron attribute (Administration > Patrons and
circulation > Patron attribute types > + New patron attribute type )
2. Note that the hint for the "Is a date" field says "...Date attributes
cannot be repeatable or linked to an authorised value category.".
3. Apply the patch.
4. Reload the page.
5. Note that the hint now says "...Date attributes are repeatable,
but cannot be linked to an authorised value category."
6. Sign off D:
PA amended: 'are repeatable' -> 'can be repeatable'
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Nind [Thu, 16 May 2024 03:59:42 +0000 (03:59 +0000)]
Bug 36338: Update onboarding error message when creating the Koha administrator patron
Update the error message for the web installer onboarding
section when creating the Koha administrator patron (where
the card number or username already exists):
- Fix capitalization
- Use the same label in the error message as used in
the form
Error message before: The patron has not been created!
Card number or Userid may already exist.
Error message after: The patron was not created! The
card number or username already exists.
Test plan:
1. Option 1:
1.1 Review the diff for the patch and make sure that
the updated text makes sense.
. Previous text: The patron has not been created!
Card number or Userid may already exist.
. Updated text: The patron was not created! The
card number or username already exists.
OR
2. Option 2:
2.1 Access the database server:
mysql -uroot -ppassword -hkoha-db-1
2.2 Drop the koha_kohadev database:
drop database koha_kohadev;
2.3 Create the database: create database koha_kohadev;
2.4 Add privileges (for a real installation this would
be limited):
grant all on koha_kohadev.* to koha_kohadev;
2.5 Restart everything (there may be some errors listed):
flush_memcached and then restart_all
2.6 Access the web installer: go to 127.0.0.1:8081
2.7 Use the database user name and password: get from
/etc/koha/sites/kohadev/koha-conf.xml
(default: koha_kohadev, password)
2.8 Continue through the installation process until you
reach 'Selecting default settings':
. Make appropriate selections to use all the sample
data options and settings
2.9 For the 'Onboarding' step - Create Koha
administrator patron:
. Surname: Acevedo
. First name: Henry
. Card number: make up a number that doesn't exist in
the sample date, for example: 741852963
. Library: Centerville
. Patron category: Staff
. Username: 23529000035676 (this is an existing
value already in the sample data)
. Password: a valid password, for example:
KohaCon2024
. Confirm password: repeat password used
. Submit
==> Error message before patch: The patron has not
been created! Card number or Userid may
already exist.
2.10 Apply the patch.
2.11 Repeat step 2.9
2.12 The error message is now: The patron was not created!
The card number or username already exists.
3. Sign off.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Janusz Kaczmarek [Wed, 22 May 2024 21:08:35 +0000 (21:08 +0000)]
Bug 36930: Item search gives irrelevant results when using 2+ added filter criteria
In the Item search the librarian is allowed, in the first step, to define
additional filters like Title, Author, Publisher, Publication date etc.
(in the third fieldset). This works fine but only for one criterion.
If one adds two or more criteria, the filter does not apply at all.
Test plan
=========
1. Make an Item search with the Pulblisher filter. Put
%University of California% as the value.
You should get 5 rows (with standard ktd test data set), three
from 1982, and two from 1988.
2. Edit search -> add the second criterion: AND Publication date is 1982.
You would expect three rows but you get 900+ rows.
3. Apply the patch; restart_all.
4. Repeat p. 2. You should get the expected three rows.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Nind [Tue, 28 May 2024 01:34:41 +0000 (01:34 +0000)]
Bug 36961: Fix typo in opacreadinghistory system preference description
Fix a spelling error in the opacreadinghistory system preference
description - 'itms' to 'items'.
Test plan:
1. In the staff interface view the description for the
opacreadinghistory system preferences (Koha administration >
System preferences > search for opacreadinghistory).
2. Note that it reads "Allow patrons to see what itms they have
checked out in the past."
3. Apply the patch.
4. Refresh the page.
5. Note that 'itms' is now spelt correctly as 'items'.
6. Sign off.
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Marcel de Rooy [Thu, 23 May 2024 08:47:50 +0000 (08:47 +0000)]
Bug 36940: Resolve two warnings on undefined branchip
If you enabled AutoLocation and have a branch without ip, this
triggers warnings.
Test plan:
Check logs in this situation with/without this patch by logging out
and in again on staff.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Nind [Tue, 21 Nov 2023 23:11:02 +0000 (23:11 +0000)]
Bug 34573: (follow-up) Additional updates for modify vendor page
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 21 Nov 2023 13:48:42 +0000 (13:48 +0000)]
Bug 34573: Fix inconsistencies in acquisitions modify vendor title tag
This patch updates the vendor details template so that the title tag
correctly reflects whether the user is viewing the vendor or modifying
it.
To test, apply the patch and go to Acquisitions.
- Locate a vendor and view the details (supplier.pl?booksellerid=X)
- The title should read "Vendor X > Acquisitions > Koha"
- Edit the vendor.
- The title should read "Modify vendor X > Acquisitions > Koha"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Julian Maurice [Fri, 16 Feb 2024 08:23:13 +0000 (09:23 +0100)]
Bug 34077: Improve documentation and error messages of writeoff_debts.pl
* Change the SYNOPSIS to better describe the different ways to use the
script
* Only show the SYNOPSIS when options used are wrong (unknown option,
no filter options, or neither -c nor -v)
* Show the options details only with --help
* Clarify the fact that -v is required when -c is not supplied in the
description of both options
* Print a specific error message for the following cases:
* no filters options
* neither -c nor -v was supplied
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Matt Blenkinsop [Thu, 23 May 2024 09:23:10 +0000 (09:23 +0000)]
Bug 36937: Remove warning from unit tests
This patch fixes a warning in the unit tests
Test plan:
1) prove t/db_dependent/api/v1/password_validation.t
2) There will be a warning in the output - 'Use of uninitialized value $status in numeric eq (==)'
3) Apply patch
4) Re-run the test
5) The warning will disappear
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Fri, 17 May 2024 12:46:30 +0000 (08:46 -0400)]
Bug 35597: Move modification logging to Koha::Suggestion
Some actions such as archiving a suggestion were not being logged.
By moving the logging to Koha::Suggestion we can ensure more
modifcations will be logged.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Lucas Gass [Fri, 17 May 2024 12:12:57 +0000 (08:12 -0400)]
Bug 35597: Log creation on suggestion from staff or OPAC
To test:
1. Apply patch, restart services, updatedatabase
2. Search for the system preference 'SuggestionsLog', it should be off.
Turn it on.
3. Create a purhase suggestion
4. Go to Tools > Log viewer. In modules check 'Suggestions'
5. You should see your newly created suggestion.
6. Create a suggestion from the OPAC.
7. You should see your newly created OPAC suggestion.
8. Modify the suggestion and check the logs again, the modification
should be logged.
9. Delete the suggestion, the deletion should be logged.
10. Do a purchase suggestion via the OPAC.
11 Check the logs to see the newly created suggestion, the interface
should be OPAC.
12. Turn off SuggestionsLog
13. No changes of any kind should be logged.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Ray Delahunty <lib-systems@arts.ac.uk> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Lucas Gass [Thu, 21 Dec 2023 23:05:19 +0000 (23:05 +0000)]
Bug 35597: logaction when modifying or deleteing suggestions
To test:
1. Apply patch, restart services, updatedatabase
2. Search for the system preference 'SuggestionsLog', it should be off.
Turn it on.
3. Create a purhase suggestion
4. Go to Tools > Log viewer. In modules check 'Suggestions'
5. You should see your newly created suggestion.
6. Modify the suggestion and check the logs again, the modification
should be logged.
7. Delete the suggestion, the deletion should be logged.
8. Do a purchase suggestion via the OPAC.
9. Check the logs to see the newly created suggestion, the interface
should be OPAC.
10. Turn of SuggestionsLog
11. No changes of any kind should be logged.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Ray Delahunty <lib-systems@arts.ac.uk> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Nind [Mon, 3 Jun 2024 02:01:30 +0000 (02:01 +0000)]
Bug 30715: Terminology for the log viewer - use 'Staff interface' instead of 'Intranet'
The log viewer (Tools > Additional tools > Log viewer) uses
'Intranet' as:
- an option for filtering what log entries to display.
- a value in the log entries interface column, for log entries.
Koha's terminology guideline is to use 'Staff interface' instead of
'Interface' (https://wiki.koha-community.org/wiki/Terminology#I).
Test plan:
1. Perform some actions that will create log entries when using the
staff interface. For example:
1.1 Enable the UseRecalls system preference.
1.2 Edit the title for a record.
1.3 Add an item for a record.
2. Use the log viewer to view the logged changes:
2.1 Go to Tools > Additional tools > Log viewer.
2.2 Select Submit.
2.3 Log entries are displayed for the changes made.
3. Note that:
3.1 For the log viewer 'Interface' filter options, "All" is
selected by default, and other options are Intranet, OPAC,
SIP, Command-line, REST API, and Cron job.
3.2 For the changes viewed in step 2, the value displayed in
the 'Interface' column is 'Intranet'.
4. Apply the patch.
5. Refresh the page.
6. Note that:
5.1 For the interface filter options, 'Intranet' is now changed
to 'Staff interface'.
5.2 In the list of log entries, the value in the interface column
is now 'Staff interface'.
7. Sign off D:
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
projects / koha.git / log