Julian Maurice [Mon, 15 Oct 2012 12:06:04 +0000 (14:06 +0200)]
Bug 8918: Fix reserve priority in ILS-DI
The priority of new hold requests was not calculated when using ILS-DI.
A new routine is added, C4::Reserves::CalculatePriority(), to calculate
the priority prior to placing a request.
A separate bug report, 11640, covers the changes in reserves to
use this new routine more generally.
This patch does therefore only affect ILS-DI.
Note: ILS-DI already allows you to generate multiple holds on a biblio or
item for the same patron. This patch does not change that behavior.
Test plan:
[1] Place multiple holds using ILS-DI HoldTitle service:
/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&request_location=test
Check the priority.
[2] Do the same using HoldItem service:
/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&item_id=ITEMNUMBER
Check the priority again.
[3] Use a biblio with multiple items. Place item level holds on both.
Check in one of these items in another branch. Confirm transfer.
Check in the other item in the original branch. Confirm hold.
Now you have a waiting and a transit hold.
Test HoldTitle and HoldItem service again a few times.
[4] Enable AllowHoldDateInFuture and add a future hold.
Now test HoldTitle and HoldItem again and check if these holds are
inserted before the future hold (lower priority).
January 29, 2014: Rebased this patch and amended it to make a distinction
between fixing the ILS-DI bug and using the new routine.
Updated commit message and test plan (marcelr).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Mon, 10 Mar 2014 16:44:00 +0000 (16:44 +0000)]
Bug 11224: (follow-up) clean up unit test for bug 10723
This patch removes the remainder of the old unit test
for bug 10723 and updates the label of the new test that
now checks that SearchOrders({ pending => 1}) omits received
orders.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Mon, 10 Mar 2014 16:24:14 +0000 (16:24 +0000)]
Bug 11224: (follow-up) apply tidying
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Mon, 10 Mar 2014 16:17:51 +0000 (16:17 +0000)]
Bug 11224: (follow-up) incorporate test for bug 11777
This patch adds authorisedby to the list of expected fields
returned by SearchOrders().
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Sat, 9 Nov 2013 13:28:07 +0000 (14:28 +0100)]
Bug 11224 : Add UT to routines of C4::Acquisition returning order(s)
C4::Acquisition need more UT, and more robust ones. This patch
adds some.
This patch adds UT to
- GetOrder
- GetOrders
- GetCancelledOrders
- GetLateOrders
It refactors UT for SearchOrders
New UT use 2 new routines, used for check the list of fields returned
by a routine:
_check_fields_of_order
_check_fields_of_orders
These 2 routines could later be used by other UT
_check_fields_of_order has its own UT (tests n°14,15,16).
to test :
prove -v t/db_dependent/Acquisition.t
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Unit tests pass, passes koha-qa.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa and t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Tue, 21 Jan 2014 05:41:00 +0000 (00:41 -0500)]
Bug 11587: get rid of warnings generated by IsSuperLibrarian with anonymous sessions
This corrects line 1250 of C4/Context.pm to be:
return ($userenv->{flags}//0) % 2;
And thus avoids an uninitialized value used in the modulus.
TEST PLAN
---------
1) Apply the first patch (to update t/Context.t)
2) prove -v t/Context.t
-- This should fail tests 7 and 8
3) Apply this patch (to fix C4/Context.pm)
4) prove -v t/Context.t
-- All tests should succeed
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 24 Jan 2014 12:00:37 +0000 (13:00 +0100)]
Bug 11587 - Add UT for IsSuperLibrarian if flags == 0
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Tue, 21 Jan 2014 05:34:43 +0000 (00:34 -0500)]
Bug 11587 - IsSuperLibrarian generates warnings (UT)
Simply viewing OPAC detail triggers a modulus warning entry.
This first patch adds two test cases to t/Context.t to test for
this situation.
TEST PLAN
---------
1) Apply this patch (to upgrade t/Context.t)
2) prove -v t/Context.t
-- Tests 7 and 8 will fail
3) Apply main patch (to amend C4/Context.pm)
4) prove -v t/Context.t
-- All tests will succeed
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Mon, 10 Mar 2014 15:42:24 +0000 (15:42 +0000)]
Bug 10558: (follow-up) choose label for matching records correctly
This patch ensures that the record type of the import batch (i.e.,
biblio or authority) is consulted in order to choose the "Matches
biblio" or "Matches authority" labels.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 16 Jul 2013 12:32:55 +0000 (08:32 -0400)]
Bug 10558 [QA Follow-up]
This patch addresses a number of issues with the main patch:
- regression on bug 2060 (i.e., displaying authority import batches
correctly)
- regression on bug 10170 (translation of import record states)A
- use of datatables.inc
- lack of clarity as to the licensing of tools/batch_records_ajax.pl
- insufficent sanitizing of input used to generate an SQL statement
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 10 Jul 2013 16:29:23 +0000 (12:29 -0400)]
Bug 10558: (follow-up) styling improvements
This patch makes improvements to the default DataTables CSS and corrects
a couple of errors in the original patch. CSS for the "full numbers"
type pagination, used by this and the quotes editor, has been cleaned up
and made more visually consistent with the brief pagination style.
Also changed:
- removed some hard-coded paths containing "http://staff.kohadev..."
- Added a column header to the column showing record match details. This
provides both information and a clearer target for clicking to resort
- Expanding the default table pager controls for this page and the
quotes editor (for consistency)
- Correction to quotes.css to fix pager display problem on wide screens
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 9 Jul 2013 16:30:58 +0000 (12:30 -0400)]
Bug 10558 - Convert records table in manage-marc-import.pl to Ajax DataTable
Some libraries would like to sort by columns for the records of an
import batch. This seems like a good use of Ajax DataTables.
Test plan:
1) Apply this patch
2) Import a record batch into Koha
a) Use some form of matching
b) Have some records that will match and some that won't
c) Have at least 30 records so you can test the pager
3) Verify the new table is functionally equivalent to the old static one
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tests fine and looks good with the exception of the corrections I put in
a follow-up.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Thu, 20 Feb 2014 16:38:53 +0000 (11:38 -0500)]
Bug 11794 - restore functioning of opacSerialDefaultTab
The opacSerialDefaultTab system preference should control whether to
show the holdings or subscriptions tab by default on the detail page for
a serial. This behavior was broken when we last updated jQueryUI because
of a change in the jQueryUI active tab class name.
This patch corrects the class on the detail page and removes the old
class from the authorities detail page (where it was unnecessary
anyway).
To test, view a serial record in the OPAC under various settings of the
opacSerialDefaultTab preference. The default tab should correctly follow
the preference.
Test in prog and Bootstrap themes.
Edit: Rebased on current master. Note that the change to
opac-auth-detail.tt is because the page never has more than one tab,
hence doesn't need the "active" designation.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested in prog and bootstrap.
All tests and QA script pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Mon, 10 Mar 2014 15:24:43 +0000 (15:24 +0000)]
Bug 11860: (follow-up) standardize spelling of "call number"
It is "call number", not "callnumber".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Julian Maurice [Fri, 20 Dec 2013 10:55:24 +0000 (11:55 +0100)]
Bug 11860: Display subscription callnumber in OPAC detail page
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Thu, 20 Feb 2014 20:18:46 +0000 (15:18 -0500)]
Bug 11328 - Show local cover images in staff client search results
Local cover images do not appear in staff client search results. This
patch adds them.
To test, enable the LocalCoverImages system preference and add at least
one cover image to a title. Perform a search which will return results
that include your title. Confirm that the local cover image is
displayed.
Search results should also display correctly with and without
AmazonCoverImages enabled as well as with LocalCoverImages disabled.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Thu, 20 Feb 2014 15:19:42 +0000 (10:19 -0500)]
Bug 11802 - corrects for the patron purchase suggestions page
This patch corrects some errors with the staff client's patron purchase
suggestions page (members/purchase-suggestions.pl).
To test, apply the patch and make sure the patronimages system
preference is enabled.
- View the purchase suggestions page for a patron whose record has a
patron image attached. The image should appear in the left-hand
sidebar.
- View the page for a patron who has submitted no purchase suggestions.
The message should be styled correctly.
- The toolbar on the page should look correct and work correctly.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Mon, 10 Mar 2014 14:57:17 +0000 (14:57 +0000)]
Bug 11866: (follow-up) repair security issue introduced by main patch
The main patch allows /any/ user with an account on the Koha system
to view the staff-side course-reserves home page -- including ordinary
patrons. This patch repairs the oversight.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Mon, 10 Mar 2014 13:55:46 +0000 (14:55 +0100)]
Bug 11866: (follow-up) ensure that empty toolbar is not displayed
If a user does not have course_reserve permission, a an empty toolbar is
displayed.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 27 Feb 2014 13:55:22 +0000 (08:55 -0500)]
Bug 11866: do not require special permissions to view course reserves in staff interface
A librarian with no course reserves permissions cannot view course
reserves from the staff intranet, yet can from the OPAC. This doesn't
make much sense. Librarians should not require any course reserves
permissions to view courses and reserves from the staff intranet.
Test Plan:
1) Log into staff intranet as a librarian with no course reserves
permissions
2) Note you cannot view course reserves
3) Apply this patch
4) Note you can now view course reserves
5) Verify you cannot modify courses or course reserves
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 11866 [Follow-up] Staff side course reserves too restrictive
This follow-up patch adds a check for the "UseCourseReserves" system
preference to the display of the Course reserves menu item in the
header.
To test, view the "More" menu with the "UseCourseReserves" system
preference on and off. The menu item should appear and disappear
accordingly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Tomas Cohen Arazi [Thu, 27 Feb 2014 15:40:57 +0000 (12:40 -0300)]
Bug 7234: koha-common Debian package now includes koha-sites.conf
This patch adds a sample koha-sites.conf file, which will be
included by the koha-common package in /etc/koha (where it belongs).
It is fixed to include the current defaults (DOM indexing for both
biblios and authorities, disabled use of memcached, and good defaults
for a normal setup if enabled).
All options are commented for ease of use by average users.
To test
- verify that the defaults are sane (let me know if it needs to be
fixed).
- build the package and verify that the file gets installed.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 28 Feb 2014 22:11:17 +0000 (22:11 +0000)]
Bug 11078: (follow-up) tidy code
- fix a couple typos in comments
- make replace a "$i" with a more descriptive variable name
- style some of the new code
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Wed, 19 Feb 2014 12:58:00 +0000 (13:58 +0100)]
Bug 11078: QA Follow-up for missing file permissions on lockfile
The original patch creates a lockfile in the ZEBRA_LOCKDIR.
It can fall back to /var/lock or even /tmp.
If the create fails, it dies. This can be considered as very
exceptional.
This followup adjusts the fallback location in /var/lock or /tmp
slightly. It appends the database name to the folder in order to
prevent interfering between multiple Koha instances. Creation of the
lockfile has been moved to a subroutine extending directory and file
creation testing.
In the very unlikely case that we cannot create the lockfile (after
three separate tries), this follow-up allows you to continue instead
of die. This is just as we did before we had file locking here. Every
time skipping a reindex could cause more harm than continuing and
having the race condition once in a while.
Test plan:
Test adding and removing lockdir from your koha-conf.xml. Check fallback.
Note that fallback in /var/lock or /tmp must contain database name.
Remove the lockdir config line and remove permissions from fallback. In
this case the reindex should continue but with a warning.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with daemon and one-off invocation simultaneously.
Tested new wait parameter.
Tried all variations of lock directory (changing permissions etc.)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Doug Kingston [Wed, 19 Feb 2014 06:56:58 +0000 (22:56 -0800)]
Bug 11078: Add locking to rebuild_zebra
This patch adds locking to rebuild_zebra.pl to ensure that simultaneous
changes are prevented (as one is likely to overwrite the other).
Incremental updates in daemon mode will skipped if the lock is busy
and they will be picked up on the next pass. Non-daemon mode
invocations will also exit immediately if they cannot get the lock
unless the new flag -wait-for-lock is specified, in which case they
will wait until the get the lock and then proceed.
Supporting changes made to Makefile.PL and templates for the new
locking directory (paralleling the other zebra lock directories).
We stash the zebra_lockdir in koha-conf.xml so rebuild_zebra.pl
can find it.
To address earlier QA concerns we:
1. added code to check if flock is available and ignore locking if
it's missing (from M. de Rooy)
2. changed default for adhoc invocations to abort if they cannot
obtain the lock. Added option -wait-for-lock if the user prefers
to wait until the lock is free, and then continue processing.
3. added missing entry to t/db_dependent/zebra_config.pl
4. added a fallback locking directory of /tmp
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Doug merged the original patch with the QA changes.
Just for the record, noting here that the original patch was tested
extensively too by Martin Renvoize.
I have added a followup for some exceptional cases.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Tomas Cohen Arazi [Mon, 21 Oct 2013 23:17:57 +0000 (16:17 -0700)]
Bug 11096: support the retrieval of large MARCXML records
This patch makes Koha <-> Zebra use MARCXML for the serialization when
using DOM, and USMARC for GRS-1.
* The following functions are modified to set the Zebra record syntax
according to the current sysprefs and configuration:
- C4::Context->Zconn
- C4::Context-_new_Zconn
* A new function 'new_record_from_zebra' is introduced, which checks the
context we are in, and creates the MARC::Record object using the right
constructor.
The following packages get touched to make use of the new function:
- C4::Search
- C4::AuthoritiesMarc
and the same happens to the UI scripts that make use of them (both in
the OPAC and STAFF interfaces).
* Calls to the unsafe ZOOM::Record->render()[1] method are removed.
Due to this last change the code for building facets was rewritten. And
for performance on the facets creation I pushed higher version
dependencies for MARC::File::XML and MARC::Record (we rely on
MARC::Field->as_string).
* Calls to MARC::Record->new_from_xml and MARC::Record->new_from_usmarc
are wrapped with eval for catching problems [2].
* As of bug 3087, UNIMARC uses the 'unimarc' record syntax. this case is
correctly handled.
* As of bug 7818 misc/migration_tools/rebuild_zebra.pl behaves like:
- bib_index_mode (defaults to 'grs1' if not specified)
- auth_index_mode (defaults to 'dom')
here we do exactly the same.
To test:
- prove t/db_dependent/Search.t should pass.
- Searching should remain functional.
- Indexing and searching for a big record should work (that's what the
unit tests do).
- Test an index scan search (on the staff interface):
Search > More options > Check "Scan indexes".
- Enable 'itemBarcodeFallbackSearch' and try to circulate any word, it
shouldn't break.
- Searching for a biblio in a new subscription shouldn't break.
- Running bulkmarcimport.pl shouldn't break.
- And so on... for the rest of the .pl files.
[1] http://search.cpan.org/~mirk/Net-Z3950-ZOOM/lib/ZOOM.pod#render()
[2] a record that cannot be parsed by MARC::Record is simply skipped (bug 10684)
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Tomas Cohen Arazi [Wed, 8 Jan 2014 17:15:28 +0000 (14:15 -0300)]
Bug 11096: Wrap each test set configuration in Search.t into a subtest
This makes it easier to read. Also fixes the test count, and is rebased
against 11499 which is needed to correctly test the patches for this bug
(i.e. indexing mode needs to be correctly set in koha-conf.xml)
To test:
[1] Run prove -v t/db_dependent/Search.t
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Mon, 9 Dec 2013 23:39:07 +0000 (23:39 +0000)]
Bug 11096: add regression tests for indexing/retrieving large MARC records
This adds direct tests of indexing and retrieving
bib records that are larger than the ISO2709 limit
of 99,999 octets.
To test: verify that prove -v t/db_dependent/Search.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Thu, 20 Feb 2014 08:53:23 +0000 (09:53 +0100)]
Bug 11798: fix problems with column sorting and row visibility in invoices table
1) Sorting on "Billing date" (functionality introduced by bug 10794)
doesn't work properly any longer after bug 10401 was pushed (another
side-effect being that "Vendor" column is currently not sortable
at all).
2) Only "top ten" invoices are always displayed in the table, and it's
not possible to change that without missing top/bottom DataTables
pagination bars.
This patch fixes sorting for "Billing date" & "Vendor" columns
in invoices table and restores the ability to see all table
rows/search results (not just "top ten").
Test plan (you'll need to have 11+ invoices with various billing
dates entered in the system):
1) apply patch,
2) view the Acquisitions invoices page (acqui/invoices.pl), do some
search (= as broad search as possible) and confirm that "Billing
date" and "Vendor" columns now do sort correctly,
3) in situations when there are more than 10 search results, they
should all be visible in the invoices table.
NOTE: Generating invoices is a painfully convoluted mess.
All my "Billing date" entries were blank, so was not
able to confirm Billing date issues. However, Vendor
sorting issues, seeing more than 10, and in my bizarre
initial case the non-visible checkboxes were all fixed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 24 Feb 2014 15:21:20 +0000 (10:21 -0500)]
Bug 11829: fix JavaScript error on staff client biblio details pages if template variables are undefined
The JavaScript included in cat-toolbar.inc expects several variables to
be passed to the template for use in calculations. Several scripts
do not pass the required variables to the template, leading to a JS
error.
This patch re-adds (See Bug 9823) hold count calculation to the required
scripts and copies the acquisitions-related count calculation from
detail.pl into related bibliographic detail scripts so that the
commonly-included cat-toolbar.inc can receive correct values.
To test, locate a bibliographic record which has no holds and is not
used in a current or deleted order, but which has a local cover image
attached. Check the following views to confirm there is no JavaScript
error:
- Normal
- MARC
- Labeled MARC
- ISBD
- Items
- Images (from the Images tab on the "Normal" detail page)
Next, locate a bibliographic record with no items attached which is used
in an Acquisitions order. On each of the pages listed above, choose
"Delete record" from the Edit menu. This should trigger a warning that
the record is used in an order. Cancel the deletion.
Finally, delete the order which references the bibliographic record. On
each of the pages listed above, choose "Delete record" again. This
should trigger a warning that the record is used in a deleted order.
Cancel the deletion.
I went through the test plan, everything works OK.
It resolves Bug 11831 as well.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- Printing from MARC and ISBD view works again
- No more Javascript errors found
- Deleting a record with attached order gives the correct warning,
both for ordered and cancelled.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Thu, 20 Feb 2014 20:42:37 +0000 (15:42 -0500)]
Bug 11805 - Use validation plugin when creating new basket in Acquisitions
The page for adding a new basket in Acquisitions includes some custom
form validation JavaScript which can be removed in favor of HTML5
validation attributes and Koha's built-in validation plugin. This patch
does so.
To test, apply the patch and go to Acquisitions -> Choose a vendor ->
New basket. Try submitting the form without entering a basket name. This
should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing basket should also work correctly.
Patch works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Tried adding a new basket with/without basket name and editing
an existing basket editing/emptying the basket name.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 10 Feb 2014 19:13:11 +0000 (14:13 -0500)]
Bug 11736 - Use new DataTables include in Koha news templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the Koha
news page.
To test you should have existing news items with varying creation and
expiration dates. Apply the patch and confirm that table sorting works
correctly for all settings of the dateformat system preference.
C4::NewsChannels.pm has been modified so that it now passes an
unformatted date to the template, where the KohaDates plugin is used to
apply the correct formatting. Sorting is based on the unformatted date.
Also corrected: Capitalization errors.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Also passes tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 7 Feb 2014 19:54:27 +0000 (14:54 -0500)]
Bug 11716 - Use new DataTables include in label manage template
This patch modifies the template for the label manage pages to use
the new DataTables include. This simplifies the inclusion of assets and
updates to the latest DataTables version.
To test, view the following pages and confirm that table sorting is
working correctly:
Manage layouts (/cgi-bin/koha/labels/label-manage.pl?label_element=layout)
Manage templates (/cgi-bin/koha/labels/label-manage.pl?label_element=template)
Manage profiles (/cgi-bin/koha/labels/label-manage.pl?label_element=profile)
Manage batches (/cgi-bin/koha/labels/label-manage.pl?label_element=batch)
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 7 Feb 2014 16:35:17 +0000 (11:35 -0500)]
Bug 11710 - Use new DataTables include in cataloging Z39.50 search template
This patch modifies the template for the cataloging Z39.50 search
template to use the new DataTables include. This simplifies the
inclusion of assets and updates to the latest DataTables version.
To test, go to cataloging and choose "New from Z39.50." Perform a search
and confirm that table sorting still works correctly.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 7 Feb 2014 20:24:06 +0000 (15:24 -0500)]
Bug 11717 - Use new DataTables include in member templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
member pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Patron details (members/moremember.pl)
- The checkouts, relatives' checkouts, and holds tables have been
modified to exclude articles when sorting of titles.
- Notices (members/notices.pl)
- Circulation history (members/readingrec.pl)
- Statistics (members/statistics.pl)
- Update child to adult patron (members/update-child.pl) - This is the
page which appears in a pop-up when you update a child patron to an
adult (from the "More" menu in the toolbar when viewing patron
details).
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 21 Feb 2014 15:35:40 +0000 (10:35 -0500)]
Bug 11809: don't display 'Clear date' on OPAC patron details form if date of birth is required
On the OPAC's patron details form, if the date of birth field is
required we shouldn't offer the user a "clear date." This patch removes
the "clear date" link if the field is required.
To test, configure the BorrowerMandatoryField system preference to
require dateofbirth. Enable the OPACPatronDetails system preference and
log in to the OPAC. View the "personal details" form and confirm that
there is no "clear date" link next to the required date of birth field.
Remove dateofbirth from the BorrowerMandatoryField system preference and
re-test. The "clear date" link should appear.
Test in both prog and Bootstrap themes.
I tested with prog and bootstrap themes, adding/removing field 'dateofbirth'
in sys pref PatronSelfRegistrationBorrowerMandatoryField.
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 21 Feb 2014 19:52:22 +0000 (14:52 -0500)]
Bug 11819 - Don't show catalog edit menu if user has no edit permissions
Currently if the logged in user lacks any cataloging permissions the
bibliographic detail page (catalogue/detail.pl) still shows the Edit
button, but with an empty dropdown menu. This patch corrects the toolbar
include so that the button will not appear at all.
To test, view the biblio detail page as a user with various combinations
of the following permissions:
- edit_items
- edit_catalogue
- items_batchmod
- items_batchdel
The edit button should appear with the correct set of links when the
user has any combination of the above permissions. If user has none the
button should not appear.
Followed test plan, patch behaves as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Template only change.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Fri, 14 Feb 2014 20:09:06 +0000 (15:09 -0500)]
Bug 11768: Show patron cardnumber in OPAC personal details
In previous versions of Koha, the patron cardnumber was displayed in the
personal details section of the OPAC for logged in users. A patron needs
to be able to access his or her cardnumber in some cases to access
online resources a library makes available that requires his or her
cardnumber. This is especially important for patron self registration
where a patron may not have a physical library card. This field should
be re-added to the patron personal details page.
Test Plan:
1) Apply this patch
2) Log into the OPAC
3) Browse to "your personal details"
4) Verify the patron cardnumber is visible
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Restores cardnumber on personal details tab in OPAC for
prog and bootstrap theme. Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Fri, 7 Feb 2014 09:13:39 +0000 (10:13 +0100)]
Bug 11707: fix editing additional attributes for patron whose category code includes a space
When editing additional attributes of a patron of a category with a
code with space (ie "CAT 3"), the Javascript is broken and Additional
attributes are not displayed.
This patch corrects by adding simple quotes around category code in JS
code.
Test plan :
- Create an patron additional attribute
- Create a new patron category with a space in code. ie "CAT 3"
- Create a new patron of this category : /cgi-bin/koha/members/memberentry.pl?op=add&categorycode=CAT 3
=> Without patch the JS is broken (Syntax error, unrecognized expression:
[data-category_code=CAT 3]) and additional attributes are not
displayed.
=> With patch the JS is not broken and additional attributes are
displayed and can be edited.
Signed-off-by: Marc Véron <veron@veron.ch>
In current Koha version it is not possible to create category codes
with blanks.
To test, I changed an existing category code directly in the database.
Then I followed the Test plan.
Without patch, attribute types were not displayed.
With patch, they were displayed as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I recommend not using codes with spaces and fix existing ones.
Koha doesn't allow you to add category codes with spaces, so the only way
to do it is via SQL.
This patch fixes a problem and passes all tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 21 Feb 2014 14:22:50 +0000 (09:22 -0500)]
Bug 10751: standardize validation of title in staff purchase suggestions form
The form for adding a new purchase suggestion in the staff client
indicates that the title field is required but does nothing to enforce
this rule. This can be handled client-side with HTML5 validation
attributes and Koha's built-in validation plugin. This patch implements
this.
To test, apply the patch and go to Acquisitions ->
Suggestions -> New purchase suggestion. Try submitting the form without
entering a title. Doing so should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing suggestion should also work correctly.
The patch displays a message 'Required' near the title field.
After submitting a empty title it changes to 'This field is required'
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The title field is required since commit
d565fb02e9fca2ac9c506e4e7d44fd8b0d66f06a
This one makes it more consistent with formatting. It makes sense.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 13 Feb 2014 14:21:28 +0000 (09:21 -0500)]
Bug 11746 [QA Followup] display edit item link only if user has permission to edit items
Signed-off-by: Havilah Lyon <havilah@aflibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 12 Feb 2014 12:47:46 +0000 (07:47 -0500)]
Bug 11746 - Add edit item links to record details page
In order to edit a specific item right now, one must select the edit
pulldown, then choose edit items, the click the edit link for the
particular item the librarian wishes to edit. It would be much more
convenient to have an edit link for each specific item in the items
table on the record details page.
Test Plan:
1) Apply this patch
2) View the record details for a record with items
3) Click the edit link for a particular item
4) Note that you are taken immediately to the item editor
for this particular item
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Havilah Lyon <havilah@aflibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Thu, 20 Feb 2014 18:39:10 +0000 (19:39 +0100)]
Bug 11803: use $dbh consistently in _koha_modify_item
This is just some code cleanup, no behavior change expected.
Also replacing errstr with err in testing the results. (See DBI.)
Test plan:
Modify an item and save it.
Followed test plan. No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 18 Feb 2014 20:37:31 +0000 (15:37 -0500)]
Bug 11789 - Use validation plugin when creating new list
The page for adding a new list includes some custom form validation
JavaScript which can be removed in favor of HTML5 validation attributes
and Koha's built-in validation plugin. This patch does so.
Other edits: Minor validation fixes.
To test, apply the patch and go to Lists -> New list. Try submitting the
form without entering a list name. This should trigger a validation
warning.
Submission of the form with valid data should work correctly. Editing an
existing list should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Tue, 18 Feb 2014 14:07:38 +0000 (15:07 +0100)]
Bug 11471: Display the currency for baskets in a basketgroup
On editing a basketgroup, the currency for baskets in a basketgroup is
always '0'.
With this patch, the currency is correctly displayed.
TEST PLAN
=========
1) Log into staff client
2) Acquisitions
3) Click 'Search' in the 'Manage orders' box
4) Click '+ New basket' because a vendor name
5) Type 'Test Basket' into basket name
6) Click 'Save'
7) Click 'Add to basket'
8) Click 'From an external source'
9) Type 'Green Eggs and Ham' into the Title text box
10) Click 'Search'
11) Click 'Order' on any one of the results
12) Click 'Add Item' in the 'Item' box
13) Select a Fund from the dropdown in the
'Accounting details' box
14) Click 'Save'
15) Click 'Close the basket'
16) Click 'Yes, close (Y)' without checking attach to a
basket group
17) Click the 'Basket groups' tab
18) Click '+ New basket group'
19) Notice the listing in the 'Ungrouped baskets'.
20) Drag and drop the entry into the 'Baskets in this group'
text area
21) Click 'Save'
22) Click 'Edit'
23) Notice it displays incorrectly. (e.g. Total: 0 0)
24) Apply the patch (git bz apply 11471)
25) Refresh the page
26) Notice it displays the currency correctly. (e.g. Total: 0 USD)
NOTE: If there is a space issue, see Bug 9654.
This can be applied separately from that bug.
27) Run the Koha QA Tool: (~/qa-test-tools/koha-qa.pl -v 2 -c 1)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 21 Feb 2014 18:44:01 +0000 (18:44 +0000)]
Bug 11256: (follow-up) tweak description of the OpacMaxItemsToDisplay syspref
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 21 Feb 2014 18:36:06 +0000 (18:36 +0000)]
Bug 11256: DBRev 3.15.00.019
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Tue, 18 Feb 2014 13:27:14 +0000 (14:27 +0100)]
Bug 11256: Opac: Set a number of items to display on a biblio detail page - bootstrap
This patch adds the changes for the bootstrap theme.
See test plan in the previous patch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 15 Nov 2013 11:02:53 +0000 (12:02 +0100)]
Bug 11256: Opac: Set a number of items to display on a biblio detail page.
Currently, the number of items to display is hardcoded (50).
But the perl script loads all items before to check if the number of
items is oversized.
This patch adds a new pref OpacMaxItemsToDisplay (default to 50). If the
*total* number of items for a biblio is greater, no item is displayed
and a link allows to display all items.
Test plan:
1/ search a biblio with many items
2/ set the pref according the number of items you want to display
3/ verify the items are not displayed if the number of items is greater
the pref value
4/ enable the OpacSeparateHoldings pref and verify the items are
displayed in different tabs (if items have different locations).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 19 Feb 2014 20:53:13 +0000 (15:53 -0500)]
Bug 9677 - Style button on notices and slips page with Bootstrap
The toolbar button on the Notices & Slips page isn't styled with
Bootstrap as other toolbar buttons are. This patch corrects this.
The patch also removes some obsolete CSS.
To test go to Tools -> Notices and Slips. The toolbar button should look
correct and work correctly.
Patch works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
"yui-menu-button" is not contained in tt files.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Thu, 20 Feb 2014 11:54:32 +0000 (12:54 +0100)]
Bug 11799: Housekeeping: Remove _biblionumber_sth from VirtualShelves.pm
This routine is no longer used.
Test plan:
Do a grep on the name.
(Bonus points:) Verify if you can perform some actions on lists.
No more occurences of _biblionumber_sth found
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 21 Feb 2014 17:38:42 +0000 (17:38 +0000)]
Bug 10580: (follow-up) tweak wording about looking for zebrasrv & zebraidx
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Tomas Cohen Arazi [Fri, 24 Jan 2014 13:40:03 +0000 (10:40 -0300)]
Bug 10580: adjust Makefile.PL to reflect that Zebra no longer optional in Koha setup
Running Makefile.PL asks the user whether to install the Zebra
configuration files and different texts relate to the user having
chosen to use Zebra.
This patch removes references to choosing to use Zebra and removes
the related variables from the code.
To test:
- Apply the patch
- Go through the different install modes
- Verify that nothing nothing is broken
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 15 Jan 2014 15:24:00 +0000 (16:24 +0100)]
Bug 11562: re-sort sysprefs.sql
The QA tools does not manage to catch error sorting on the sysprefs.sql
file if it is already badly sorted.
This patch tidies up the sysprefs file.
TEST PLAN
---------
[1] Verify that loading sysprefs.sql into an empty Koha
database (or one whose system preferences table is
is empty) works.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
RM note: I must point out that there ZERO functionality associated
with the order that system preferences occur in that SQL script; they are
sorted solely in an attempt to reduce the likelihood of merge conflicts
during the development process. Consequently, I dislike language that
suggests it is an "error" if sysprefs.sql happens to not be perfectly
sorted; it is at most an inconvenience.
Galen Charlton [Fri, 21 Feb 2014 16:08:01 +0000 (16:08 +0000)]
Bug 7372: (follow-up) remove last traces of roadtype table and admin pages
This patch removes the DBIC schema class for the 'roadtype' table
and staff interface templates that are no longer reachable with
the removal of the road type administration page. It also removes
the creation of the table during installation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 21 Feb 2014 16:02:33 +0000 (16:02 +0000)]
Bug 7372: DBRev 3.15.00.018
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 23 Oct 2013 12:27:45 +0000 (14:27 +0200)]
Bug 7372: Move road types from the roadtype table to the ROADTYPE AV
Currently road types are stored in a specific table in DB. Moreover, an
admin page is present in order to manage them.
This patch proposes to remove this table and this page in favour of a
new authorised value category 'ROADTYPE'.
This patch:
- adds a new AV category 'ROADTYPE' (created from the roadtype table
content).
- remove the roadtype table.
- remove the .pl and .tt file admin/roadtype
- remove the 2 routines C4::Members::GetRoadTypes and
C4::Members::GetRoadTypeDetails
Test plan:
1/ Execute the updatedatabase entry and verify existing roadtypes are
now stored in the AV 'ROADTYPE'.
2/ Verify you can add/update a streettype for patrons.
3/ Verify on following pages the streettype is displayed in patron
information (top left):
circ/circulation.pl
members/memberentry.pl
members/moremember.pl
members/routing-lists.pl
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Fri, 24 Jan 2014 15:47:53 +0000 (09:47 -0600)]
Bug 11272 - add second submit button to inventory form
The inventory tool allows for 2 ways of processing files. The first
is to upload a file. The second is to generate the shelf list.
Most libraries think they have to fill in all fields because the
submit button is at the bottom of the second option. They do not.
This patch adds a second submit button under the first method to
make this clearer.
To test:
* Generate a file of barcodes for inventorying
* Before applying the patch use the file upload method to mark as seen
* Apply the patch
* Use the file upload method to mark as seen using the new submit
* Repeat the above for the shelf list method
* Confirm that inventory still works as expected with 2 buttons
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Ketan Kulkarni [Thu, 21 Nov 2013 09:07:58 +0000 (14:37 +0530)]
Bug 11087: Make the Pay Fines tab the default tab
Since paying fines is the most likely action when clicking on
the Fines tab, the pay fines tab should be the default rather
than the account summary.
http://bugs.koha-community.org/show_bug.cgi?id=11087
Signed-off-by: Holger Meißner <h.meissner.82@web.de>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified by accessing the fines pages from the various
patron account pages.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Thu, 20 Feb 2014 19:09:11 +0000 (19:09 +0000)]
Bug 11611: DBRev 3.15.00.017
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Sun, 26 Jan 2014 18:55:46 +0000 (19:55 +0100)]
Bug 11611: Rephrase description and examples of 5 MARC related sysprefs
This patch rephrases the description or examples of 5 sysprefs:
1/ MARCAuthorityControlField008: "MARC" -> "MARC21"
2/ itemcallnumber: "Examples" -> "Examples (for MARC21 records)"
3/ DefaultLanguageField008: "Range 35-37" -> "Range 35-37 of MARC21 records"
4/ MARCOrgCode: "new MARC records" -> "new MARC21 records"
5/ UNIMARCAuthorityField100 description: "Do NOT include the date
(position 00-05)." -> "position 08-35. Do NOT include the date
(position 00-07)."
It also adds description in SQL systempreferences table for
UNIMARCAuthorityField100, MARCAuthorityControlField008 and MARCOrgCode.
Test plan:
- Apply and run updatedatabase.pl
- Check the changes are taken into account in syspref administration
page
- Check the changes are taken into account in systempreferences table
(for UNIMARCAuthorityField100, MARCAuthorityControlField008 and
MARCOrgCode)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 19 Feb 2014 20:26:24 +0000 (15:26 -0500)]
Bug 11796: fix display of search result facets if facet happens to have exactly six entries
If a search gives results with 6 facets, one of those facets won't be
displayed. This is due to a bug in the code that only considers great
than 6 facets in one area, and less than 6 in another.
Test Plan:
1) Perform a search that should give results for 6 different libraries
2) Note you only see 5 libraries in the facets with no option to expand
3) Apply this patch
4) Repeat step 1
5) Note you now have the option to expand the facets list
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch should provide a regression test but I really don't know how
to write it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 19 Feb 2014 16:36:30 +0000 (11:36 -0500)]
Bug 11791 - Use validation plugin when creating new city
The page for adding a new city includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Administration -> Cities -> New city.
Try submitting the form without entering a city or zip code. This should
trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing city should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: This patch changes the behavior. Before the patch, only 1 out of city
and zip was required. Now both are. Since the 2 inputs were marked as
required, I think they should be.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 19 Feb 2014 16:59:33 +0000 (11:59 -0500)]
Bug 11792 - Use validation plugin when creating new currency
The page for adding a new currency includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Administration -> Currencies &
Exchange rates -> New currency. Try submitting the form without entering
a currency, rate, and/or symbol. This should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing currency should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 19 Feb 2014 17:29:34 +0000 (12:29 -0500)]
Bug 11793 - Use validation plugin when creating new item type
The page for adding a new item type includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Administration -> Item types -> New
item type. Try submitting the form with the following error conditions:
- Missing item type
- Missing description
- A non-number in the "rental charge" field
These errors should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing item type should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 19 Feb 2014 18:05:19 +0000 (13:05 -0500)]
Bug 11795 - Use validation plugin when creating new Z39.50 server
The page for adding a new Z39.50 server includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Administration -> Z39.50 client
targets -> New Z39.50 server. Try submitting the form with any of the
following error conditions:
- Missing Z39.50 server name
- Missing hostname
- Missing port
- Non-numeric port
- Missing database
- Non-numeric rank
- Non-numeric timeout
These errors should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing
an existing Z39.50 server should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: replace tabs with spaces
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 18 Feb 2014 20:26:30 +0000 (15:26 -0500)]
Bug 11788 - Use validation plugin when creating new course
The page for adding a new course includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Course reserves -> New course. Try
submitting the form without entering a department, course number,
and/or course name. This should trigger validation warnings.
Submission of the form with valid data should work correctly. Editing an
existing course should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 18 Feb 2014 19:52:26 +0000 (14:52 -0500)]
Bug 11787 - Use validation plugin when adding new vendor
The vendor entry form uses some custom JavaScript which can be removed
in favor of HTML5 validation attributes and Koha's built-in validation
plugin. This patch does so.
Also corrected: Minor validation issue.
To test, apply the patch and go to Acquisitions -> New vendor. Try
submitting the form without entering a vendor name. This should trigger
a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing vendor should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 18 Feb 2014 17:13:39 +0000 (12:13 -0500)]
Bug 11785 - Use validation plugin when uploading local cover images
When uploading local cover images the form should not be submitted if
no file has been selected. The existing form validation script doesn't
work. This patch adds HTML5 validation attributes and use of Koha's
built-in form validation plugin.
To test, apply the patch and go to Tools -> Upload local cover image.
Try to submit the form without selecting a file to upload. You should be
prevented from doing so. Choose a file and confirm that the upload
completes correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 19 Feb 2014 20:06:36 +0000 (15:06 -0500)]
Bug 10714 [Follow-up] Redirect to list contents view upon cancel after initiating edit from list contents view (staff)
This follow-up corrects the "cancel" action on list edit actions based
on whether the edit was initiated from the list of lists or the list
contents view.
To test, view the list of lists and click the edit link next to one of
them. Click the cancel link. You should return to the list of lists you
were just viewing.
View the contents of a list. Choose "Edit list" from the edit menu.
Click the cancel link on the edit screen. You should return to the list
contents view from which you initiated the edit action.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 12 Aug 2013 19:30:16 +0000 (15:30 -0400)]
Bug 10714: Redirect to list contents view upon save after initiating edit from list contents view (staff)
In the staff client, if you initiate a list edit from the list contents
view you should be redirected to that same view after saving your
changes. The OPAC already works this way.
To test, view the contents of an existing list. Click the "Edit list"
item under the "Edit" menu. Click save on the list edit form and you
should be redirected back to the contents view of that list.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Mon, 6 Jan 2014 12:06:29 +0000 (12:06 +0000)]
Bug 11479: Remove experimental given/when keywords
Replace constructs using given and when by if/else
feature now generates compilation warnings in 5.18
and is liable to change behaviour.
This patch:
* replaces the construct with if/else
* reformats the if branching using perltidy
to remove the now redundant indent
To test:
[1] Verify that prove -v t/db_dependent/MarcModificationTemplates.t
passes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Mon, 6 Jan 2014 11:53:29 +0000 (11:53 +0000)]
Bug 11478: Replace experimental given/when keywords
The keywords given and when are flagged experimental
in perl 5.18 and subject to change. This patch
replaces the construct by an if/elsif
To test:
[1] Verify that prove -v t/SimpleMARC.t passes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Thu, 30 Jan 2014 19:17:10 +0000 (14:17 -0500)]
Bug 11411 - Bootstrap theme (enhancement) for (right to left)
This patch improves Koha's layout when a right-to-left language is being
displayed by correcting a float set by the right-to-left version of
Bootstrap CSS.
The patch modifies the right-to-left Less file and includes a
now-minified version of the compiled CSS.
To test, install a right-to-left language like ar-Arab. Apply the patch
and view the OPAC under the Bootstrap theme. When logged in, the log out
link is now aligned to the left.
Signed-off-by: Holger Meißner <h.meissner.82@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Mon, 10 Feb 2014 12:28:16 +0000 (13:28 +0100)]
Bug 11732: Eliminate warning on undefined branchcode
When you run the Reserves test, you have the warnings:
Use of uninitialized value $branchcode in hash element at /usr/share/koha/testclone/C4/Letters.pm line 138.
Use of uninitialized value $branchcode in hash element at /usr/share/koha/testclone/C4/Letters.pm line 148.
This patch removes that warning.
Test plan:
Run the Reserves.t again.
Revised Test Plan
-----------------
Run the following on the command line prompt before and after
applying the patch:
perl -e "use C4::Letters; *C4::Context::userenv= sub { return {} }; my \$blah=C4::Letters::getletter('circulation','DUE', 'BRA');"
Before the patch there will be errors (as above), after there will not.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
IndependentBranches must be on.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 19 Feb 2014 21:00:32 +0000 (21:00 +0000)]
Bug 11202: (follow-up) update number of expected tests for t/QueryParser.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Mon, 3 Feb 2014 12:17:17 +0000 (13:17 +0100)]
Bug 11202: FIX UT for QueryParser.t
Test plan:
prove t/QueryParser.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Tue, 5 Nov 2013 11:33:04 +0000 (12:33 +0100)]
Bug 11202: Improve UNIMARC biblio indexing
This patch makes the following changes to UNIMARC biblio indexing :
A. Changes to UNIMARC conf files
1. add comments to biblio-koha-indexdefs.xml
2. make biblio-koha-indexdefs.xml more compact by grouping some
declarations
Ex : 200$f and 200$g => one declaration for 200$fg
3. suppress unneeded declarations (indexing of some 4XX fields and 6XX
fields not in unimarc format)
4. unindex some (sub)fields unneeded by most users (318, 207,230,210a,
215, 4XXd)
5. change the way 308 field is indexed (no visible changes)
6. replace Title-host with Host-item -- see bug 11119
7. index 208 in Material-Type -- see bug 11119
8. index 100 pos 8-9 and 9-12 in pubdate:y and pubdate:n
9. index 100 pos 8-9 in pubdate:s instead of 210$d
10. Index all subfields of note 334 and 327 in note index
11. Index 304 and 327 in title index as well as note index
327 can contain a list of titles included in a work
304 can contain the title of the original work in case of a
translation
12. Index 314 in author index as well as note index
314 can contain authors not mentionned in 200$f/g (the 4th, 5th etc.
author)
13. Index 328 note in Dissertation-information as well as note
14. Index 328$t in Title
B. Changes to ccl.properties :
1. add a new index Dissertation-information (1056)
2. fix EAN, pubdate and acqdate (they were not linked with bib1 attributes)
C. Changes to Search.pm
1. add Dissertation-information and suppress Title-host and UPC
D. Changes to QP config file queryparser.yaml
1. add Dissertation-information
2 fix EAN, pubdate and acqdate
Test plan :
If you cannot test in GRS1, test only in DOM, as GRS will be deprecated.
1. Apply the patch in a UNIMARC Koha running with DOM and ICU
2. copy src/etc/searchengine/queryparser.yaml into the main config
directory of QP
3. copy src/etc/zebradb/ccl.properties into the main config directory
of Zebra
4. copy src/etc/zebradb/marc_defs/unimarc/biblio/* into the main config
directory of Zebra
5. reindex biblios (rebuild_zebra.pl -r -b -x -v)
6. test note index : make some searches on 334$b or 327$b
7. test author index : make some searches on 314 field
8. test title index : make some searches on 304 and 327 field, make a
search on 328$t subfield
9. test dissertation-information index : make some searches on 328 field
10. In a record, put in the dates of 100 fields the values "1000" (1st
date) and "1001" (2d date) ; try to search a book written in year
1000, you should find the record ; idem for year 1001
11. make some searches and sort by date. It should work better as before,
especially if you have values like "c2009" or "impr. 2010" in 210
field
12. Regression test : make some searches on several indexes, like EAN,
etc. It should work as before
Test 10-12 with and without Queryparser activated.
Be careful: with Queryparser activated, the index names (title,
dissertation-information...) must be entered in lowercase only.
Of course, to test search and sort by dates, you need to have full
records, with dates in 100 field as well as 210 field.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 19 Feb 2014 20:35:08 +0000 (20:35 +0000)]
Bug 10544: (follow-up) update MARC21 DOM index definitions
This patch updates the MARC21 DOM index definitions to
index the 952$i as 'Number-local-acquisition' rather than
'stocknumber'.
To test (for a MARC21/DOM setup):
[1] Copy the MARC21 biblio-zebra-indexdefs.xsl over to the
active Zebra configuration directory.
[2] Reindex the bib records.
[3] Verify that 'stocknumber', 'inv', and 'number-local-acquisition'
searches work.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Wed, 24 Jul 2013 10:39:59 +0000 (12:39 +0200)]
Bug 10544 - add Number-local-acquisition in QueryParser config
This patch adds the Number-local-acquisition into QueryParser
configuration file.
Like in ccl.properties, "Number-local-acquisition" is the main index
name and "stocknumber" and "inv" are aliases.
Test plan :
Enable QueryParser :
- Enable UseQueryParser syspref
- Edit your koha-conf.xml
- Add to "config" node : <queryparser_config>[your path]/etc/searchengine/queryparser.yaml</queryparser_config>,
adapt [your patch] to your install configuration folder
- If needed copy from sources "etc/searchengine/queryparser.yaml" into
your install configuration folder
Test search :
- Add Number-local-acquisition on an existing subfield in records.abs.
For example on item barcode field
- Reindex Zebra database
- Choose a value of this field that will match some results. For
example : "0*" will match all barcodes beginning with zero
- In intranet, enter this URL : <your server>/cgi-bin/koha/catalogue/search.pl?idx=stocknumber&q=0*&sort_by=relevance
=> You get some results
- In intranet, enter this URL : <your server>/cgi-bin/koha/catalogue/search.pl?idx=inv&q=0*&sort_by=relevance
=> You get the same results
- In intranet, enter this URL : <your server>/cgi-bin/koha/catalogue/search.pl?idx=number-local-acquisition&q=0*&sort_by=relevance
=> You get the same results
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Comments on case sensitivity of index names in QueryParser, see Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Wed, 24 Jul 2013 10:37:00 +0000 (12:37 +0200)]
Bug 10544: add Number-local-acquisition in known indexes
Adding Number-local-acquisition in C4::Search known indexes allows to
search without using "ccl=" prefix.
Also corrects in ccl.properties : inv must be an alias of
Number-local-acquisition.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Fri, 5 Jul 2013 14:35:45 +0000 (16:35 +0200)]
Bug 10544: ensure that stocknumber searches work for MARC21
Bug 6256 replaced in bib1.att stocknumber by Number-local-acquisition
for number 1062.
In this case, Number-local-acquisition must be used in record.abs and
stocknumber can be an alias of it in ccl.properties.
Test plan (for MARC21/GRS1):
- drop zebra database (rebuild_zebra.pl -r ...)
- reindex
- test in simple search : ccl=Number-local-acquisition,alwaysmatches=''
=> you get all records with a stocknumber
- test in simple search : ccl=stocknumber,alwaysmatches=''
=> you get the same results
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 19 Feb 2014 20:04:22 +0000 (20:04 +0000)]
Bug 11644: (follow-up) add FIXME
Arithmetic with monetary amounts is a *hard* problem -- or if
not hard, at least super-fiddly, particularly since in theory
a Koha database could have to deal with dozens of currencies
if used by a large research library. This patch adds a FIXME
implicitly commenting on the poor state of affairs of available
monetary calculation modules on CPAN.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 30 Jan 2014 17:39:19 +0000 (12:39 -0500)]
Bug 11644: fix occasional failure to update fund amount due to floating-point math
When attempting to update a fund, if the amount unalloccated for the
fund is equal to the total, you can be prevented from saving. This is
due to imprecise floating point number comparison in
check_parent_total.pl
Test Plan:
1) Create a fund where the amount unallocated is equal to the amount
unallocated for the budget period
2) Edit the fund, attempt to change the name of the fund
3) Note you recieve an error and cannot save
4) Apply this patch
5) Repeat step 2
6) Note you can now update the fund
Signed-off-by: Sean McGarvey <smcgarvey@pascocountyfl.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 19 Feb 2014 17:09:34 +0000 (17:09 +0000)]
Bug 11777: add regression test
This patch adds a regression test for ensuring that the
authorisedby field is returned by SearchOrders().
To test:
[1] Upon applying the main patch, verify that
prove -v t/db_dependent/Acquisition.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Amit Gupta [Tue, 18 Feb 2014 09:27:44 +0000 (14:57 +0530)]
Bug 11777: ensure "created by" is displayed by the order receiving page
This fixes a regression introduced by the patches for bug 10723.
To Test:
1) Create budget and fund under budget administration.
2) Create Vendor in acquisitons module.
3) Create basket under vendor.
4) Create order and choose budget while creating order.
5) Click on Receive shipment button.
6) Click on receive link on the right hand side you
will be able to see a staff user name in the "created by"
field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 18 Feb 2014 14:47:32 +0000 (09:47 -0500)]
Bug 11783: ensure CD field in SIP patron information response is populated
If a patron has a record-level hold that is unavailable, any patron
information request will send back an empty CD field when this field
should have an item barcode in it [RM note: this actually isn't
universally true -- the SIP2 standard is silent as to what is supposed
to go in the CD field. Some SIP2 devices do indeed want an item
barcode, but others are known to just want a display of the title
and author of the request in question. Providing an option is the
topic of a new enhancement request, however.]
This is due to a minor error in ILS::Patron::_get_outstanding_holds
where GetItemnumbersForBiblio is assumed to return an array but in
reality returns an arrayref.
Test Plan:
1) Create a record level hold for a patron and record
2) Using SIP2, make a patron information request
3) Note the empty CD fields
4) Apply this patch, restart SIP server
5) Repeat step 2
6) Note the CD field now has a barcode
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test this patch but the following code shows me it is correct:
use C4::Items;
use Data::Dumper;
my $biblionumber = 5035;
my $itemnumber = (GetItemnumbersForBiblio($biblionumber))[0];
say Dumper $itemnumber;
$itemnumber = (GetItemnumbersForBiblio($biblionumber))->[0];
say Dumper $itemnumber;
displays:
$VAR1 = [
'23168',
'23169',
'23170',
'23171',
'23172'
];
$VAR1 = '23168';
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 19 Feb 2014 16:40:06 +0000 (16:40 +0000)]
Bug 11779: (follow-up) improve GetLoggedInBranchcode() and add test cases
This patch adjusts the new GetLoggedInBranchcode() template function so
that it returns the empty string rather than undef if there is no
active user environment. That way, there won't be lots of undefined
value warnings if/when this function gets used in the OPAC.
This patch also adds test cases.
To test:
[1] Verify that there are no regressions in the main test
plan for this bug.
[2] Verify that prove -v t/db_dependent/Koha_template_plugin_Branches.t
passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 18 Feb 2014 12:43:44 +0000 (07:43 -0500)]
Bug 11779: fix unexpected change in logged-in library when changing overdue notice triggers
Steps to reproduce:
1) Log into staff intranet
2) Set logged in branch
3) Browse to tools/overdue notice triggers
4) Select a branch from the pulldown that is not your logged in branch
5) use the "Check out" bar at the top of the page to search for a patron
to check out to
6) Once you have landed here, click the "check out" tab link again, or
the Edit button ( any action really )
7) Note your logged in branch has now changed to the once selected
when editing the notice/status triggers
This is due to the way the patron search passes the branchcode to be
used via the form. This form assumes the branchcode variable is
always the currently logged in branch, which may not and is not
always the case.
Test Plan:
1) Apply this patch
2) Repeat the steps to reproduce above
3) Note your logged in branch does not change
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Funny bug :) This patch fixes the described issue and should not
introduce regression.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marc Véron [Tue, 18 Feb 2014 00:18:23 +0000 (01:18 +0100)]
Bug 11784 - fix displaying patron images in self checkout
I suppose this bug was introduced with Bug 10636 (patronimage should
have borrowernumber as PK, not cardnumber)
To test:
- Have a Patron with image. Configure everything to show image in SCO.
- Go to SCO and log in patron
- Image does not show up (broken link)
- Apply patch
- Test with prog, ccsr and bootstrap themes
- Image should display
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 10 Feb 2014 20:29:06 +0000 (15:29 -0500)]
Bug 11740 - Use new DataTables include in quotes upload template
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the
quotes upload page.
To test you need a CSV file of quotes to upload ( "source","text" ).
Go to Tools -> Quote editor and click the "Import quotes" button. Upload
the CSV file and confirm that the table which previews the import
results loads correctly. Sorting is not enabled, but pagination and
searching should work.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
No regression found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 14 Feb 2014 19:29:47 +0000 (14:29 -0500)]
Bug 11767 - Use validation plugin when creating new authority framework tag
The page for adding a new tag to an authority framework includes some
custom form validation JavaScript which can be removed in favor of HTML5
validation attributes and Koha's built-in validation plugin. This patch
does so.
The patch also moves some tag markup out of the script and into the
template where it belongs.
To test, apply the patch and go to Administration -> Authority types ->
MARC structure -> New tag. Try submitting the form without entering a
tag number. This should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing tag should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 14 Feb 2014 18:11:04 +0000 (13:11 -0500)]
Bug 11766 - Use validation plugin when creating new authority type
The new authority type entry form uses custom form validation
JavaScript. This patch removes it in favor of using HTML5 validation
attributes and Koha's built-in validation plugin.
To test, go to Administration -> Authority types and click "New
authority type." Try submitting the form without entering any data. You
should see a warning about required fields. Upon entering text in those
fields the warning should disappear.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 12 Feb 2014 15:12:58 +0000 (10:12 -0500)]
Bug 11749 - Remove unused jQuery plugin jquery.hoverIntent.minified.js from the staff client
The jQuery plugin jquery.hoverIntent.minified.js is used only in the
OPAC, not the staff client. This patch removes it from the staff client.
To test, apply the patch and search for instances of "hoverIntent." Only
references in OPAC templates should be returned.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 14 Feb 2014 21:24:10 +0000 (16:24 -0500)]
Bug 11771 - Use validation plugin when creating new MARC framework tag
The page for adding a new tag to a MARC framework includes some
custom form validation JavaScript which can be removed in favor of HTML5
validation attributes and Koha's built-in validation plugin. This patch
does so.
The patch also moves some tag markup creation out of the script and into
the template where it belongs.
To test, apply the patch and go to Administration -> MARC bibliographic
framework -> MARC structure -> New tag. Try submitting the form without
entering a tag number. This should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing tag should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Great improvement! Before this patch, I got a JS alert but the form was
submitted anyway.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Fri, 31 Jan 2014 13:47:09 +0000 (14:47 +0100)]
Bug 11649 - Always use words "copy number" - opac prog
In most cases, the value of items.copynumber is displayed using the
words "Copy number". But in some cases, it is just "Copy".
It would be better to always use "Copy number" because in translation
the word "Copy" means the action of coping.
This patch manages templates of opac prog theme.
To test, display an item containing a value in items.copynumber.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Fri, 31 Jan 2014 13:46:20 +0000 (14:46 +0100)]
Bug 11649 - Always use words "copy number" - opac bootstrap
In most cases, the value of items.copynumber is displayed using the
ords "Copy number". But in some cases, it is just "Copy".
It would be better to always use "Copy number" because in translation
the word "Copy" means the action of coping.
This patch manages templates of opac bootstrap theme.
To test, display an item containing a value in items.copynumber.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Fri, 31 Jan 2014 13:44:26 +0000 (14:44 +0100)]
Bug 11649 - Always use words "copy number" - intranet
In most cases, the value of items.copynumber is displayed using the
words "Copy number". But in some cases, it is just "Copy".
It would be better to always use "Copy number" because in translation
the word "Copy" means the action of coping.
This patch manages templates of intranet.
To test, display an item containing a value in items.copynumber.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 14 Feb 2014 13:48:46 +0000 (08:48 -0500)]
Bug 11756: improve default sorting on hold ratios report
The DataTables plugin doesn't by default take multiple columns into
account when sorting. The hold ratios report presents a situation where
it makes sense to sort by default based on two columns: hold count and
title, since there are likely to be many titles with the same hold
count.
This patch adds sorting by default on holds (descending) and title
(ascending). It also modifies the configuration of the title sort to
exclude articles when sorting.
To test, view the hold ratios report. If necessary use the filter form
to reduce the minimum hold ratio and generate more results. Confirm that
the correct columns can be sorted.
Note that by default one can manually trigger sorting on two columns by
shift-clicking the second column header.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 7 Feb 2014 15:30:19 +0000 (10:30 -0500)]
Bug 11709: revisions to Bootstrap OPAC lists interface
This patch makes some revisions to the lists template:
- Removed the old prog theme breadcrumbs from the List edit screen.
- Added New/Edit/Delete controls to the list view in cases where the
list is empty.
- Corrected some breadcrumb logic.
To test, apply the patch and edit an existing list. You should see a
heading "Editing [list name]".
If necessary create a list with zero items on it. View the list. You
should see New/Edit/Delete links above the message about the list being
empty.
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Stéphane Delaune [Mon, 10 Feb 2014 09:52:59 +0000 (10:52 +0100)]
Bug 11730: ensure that C4::Charset loads C4::Context
C4::Charset::SetMarcUnicodeFlag() fetches system preference
values, so since it invokes routines in C4::Context, it should
load the module.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>