Katrin Fischer [Sun, 10 Feb 2019 00:36:20 +0000 (01:36 +0100)]
Bug 20544: Wrong comment database documentation on itemnotes
Fixes the comments in kohastructure.sql to state the right
MARC21 fields for itemnotes (public and internal).
To test:
- Create a new Koha database and make sure it still installs
- Read the patch and check comments are correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sun, 10 Feb 2019 00:48:46 +0000 (01:48 +0100)]
Bug 20174: Remove xml_sax.pl target from Makefile.pl
There appears to be no xml_sax.pl in Koha, so the
reference should be removed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Mon, 4 Feb 2019 06:30:51 +0000 (06:30 +0000)]
Bug 8387: Hide headings in tools when user has no permissions for any listed below
The headings for each column on the tools page will show, even if the
user has no permission for any tool below it. This patch tries to
correct this.
To test:
- Try various combinations of tool permissions
- On the tools module start page and for the tools sidebar
visible on the left on a tool's page:
- Make sure headings don't show when you have no permissions
for any of the tools listed below
- Make sure headings show correctly if you have one or
many of the tools permissions needed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The qa tool gives some warnings but I think they can be considered false
positives.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
- Go to Reports > Statistics wizards > Acquisitions
- Pick a row and column
- Compare results with and without collection filter
- Verify the table is always the same
- Apply patch
- Repeat comparison, verify the filter works now
https://bugs.koha-community.org/show_bug.cgi?id=18393 Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Fri, 4 Jan 2019 11:42:08 +0000 (11:42 +0000)]
Bug 10676: Add unit tests - GetItemsInfo
To test:
prove t/db_dependent/Items.t
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Fri, 4 Jan 2019 10:11:03 +0000 (10:11 +0000)]
Bug 10676: Fix behaviour of OpacHiddenItems for items.restricted
The numerical restricted value was overwritten in GetItemsInfo
with the description. So OpacHiddenItems would only work for
restricted using the description, not the numerical value
of the authorised value like for other similar status fields.
This changes GetItemsInfo to use a separate variable for
the description, as it's already done for notforloan and
changes the template files where the variable is used
accordingly.
To test
- Before applying patch
- Configure OpacHiddenItems with:
restricted: [1]
- Find a record with more than one item and mark one of the items
as "Restricted Access"
(assume standard sample data - check authorised value if status doesn't exist)
- Verify the item is still shown in OPAC.
- Apply patch
- Verify that the item is now hidden
- Verify that the status still displays nicely in the staff detail page
- Delete OpacHiddenItems
- Verify that the status is showing nicely in the OPAC detail page
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 7 Feb 2019 13:11:35 +0000 (13:11 +0000)]
Bug 22287: Correct new charts CSS
This patch reverts some changes to reports CSS from Bug 22168 which were
unnecessary and which adversely affected the report add/edit form
styling.
To test, apply the patch and clear your browser cache if necessary.
Go to Reports -> Saved reports and repeat the test plan for Bug 22168:
- Run a report which returns more than one column.
- On the report results page, click the "Create chart" button. The chart
settings form should appear in a modal window.
- Click the "Draw" button. The modal should disappear and the chart
should be shown.
Then test the process for adding or editing an SQL report. The form
should be styled in a way consistent with other forms in the staff
client.
Signed-off-by: Mikaël Olangcay Brisebois <mikael.olangcay-brisebois@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test you should have one or more records in your catalog with star
ratings.
- Apply the patch and set the OpacStarRatings system preference
to "results and details"
- Perform a search in the catalog which will return one or more titles
which have ratings.
- Confirm that the ratings appear correctly and the ratings are
read-only.
- Open the "normal" detail page for that record.
- Confirm that the star rating appears correctly.
- Test setting and re-setting your star rating. Confirm that it is
saved.
- Confirm that the "cancel rating" link appears when you have a rating
set, and that it disappears after you click it.
- Test that the "only details" and disabled options of the
OpacStarRatings preference work as they should.
- Confirm that information about the plugin appears on the About page in
the staff client, replacing the old star ratings plugin information.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Magnus Enger [Mon, 11 Feb 2019 10:07:21 +0000 (11:07 +0100)]
Bug 12488: Make bulkmarcimport.pl -d use DELETE instead of TRUNCATE
On MySQL >= 5.5 bulkmarcimport.pl with the -d (delete) switch gives
an error like "Cannot truncate a table referenced in a foreign
key constraint". This patch proposes to replace the offending
TRUNCATE with DELETE. Auto incerement counters are reset to 1 to
preserve the functionality from TRUNCATE.
To test:
- Make sure you havae a test database with some records and items
- Run bulkmarcimport.pl with the -d switch
- Observe the error described above
- Apply this patch
- Run bulkmarcimport.pl with the -d switch again
- Observe the lack of an error
- Verify that the newly imported records and items have biblionumber
and itemnumbers starting with 1
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Wed, 16 Jan 2019 13:19:45 +0000 (13:19 +0000)]
Bug 19832: Don't fill holds in SIP/Transaction/Checkout.pm
AddIssue already checks for holds in the item being issued and deals with them
The sip code, additionally, does not consider that multiple holds per bib
is allowed
To test:
0 - Apply only first patch (unit tests)
1 - Place two holds for a patron on a bib
2 - Checkout that item via sip_cli_emulator
3 - Note all holds are cancelled/filled
4 - prove -v t/db_dependent/SIP/Transaction.t
5 - it fails
6 - Apply second patch
7 - prove tests, all green
8 - Place two holds on a single bib for one patron again
9 - Checkout the item via sip_cli_emulator
10 - Only one holds is filled
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 3 Jan 2019 20:52:15 +0000 (20:52 +0000)]
Bug 22067: Return if no patron passed to can_see_patron_infos
To test:
1 - Find an adult patron
2 - Add a child to their account
3 - Delete the parent from the db
4 - Attempt to edit the child record
5 - Apply patch
6 - Repeat
7 - Note you can edit the child account
8 - Note guarantor id is not a link
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No blocker for me, but we are a bit hiding that guarantorid probably should
be a foreign key cleared to NULL at deletion time.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Wed, 6 Feb 2019 15:10:07 +0000 (16:10 +0100)]
Bug 22140: Larger unit test for get_hostitemnumbers_of
Add syspref EasyAnalyticalRecords impact in unit test for get_hostitemnumbers_of
Test plan :
Run t/db_dependent/Items.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Wed, 6 Feb 2019 14:03:01 +0000 (15:03 +0100)]
Bug 22140: Use of EasyAnalyticalRecords pref is get_hostitemnumbers_of
Like Bug 20702 defined GetHostItemsInfo does nothing if EasyAnalyticalRecords pref is disabled, get_hostitemnumbers_of must be dependant on this pref too.
Test plan :
1) Build an analytical record with 773$0 and $9
2) Enable EasyAnalyticalRecords
4) Place an hold on the record
5) => You see the linked item
6) Disable EasyAnalyticalRecords
7) Place an hold on the record
8) => You dont see the linked item
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Wed, 16 Jan 2019 12:32:35 +0000 (13:32 +0100)]
Bug 22140: Use of EasyAnalyticalRecords pref in search
Like Bug 20702 defined GetHostItemsInfo does nothing if EasyAnalyticalRecords pref is disabled, there are other places where code must be dependant on this pref.
Test plan :
1) Build an analitical record with 773$0 and $9
2) Enable EasyAnalyticalRecords
3) Don't apply patch
4) Go to OPAC
5) Perform a search that displays the record, check there is the linked item
6) Open record detail page, check there is the linked item
7) Apply patch and redo 5) and 6)
8) Disable EasyAnalyticalRecords
9) redo 5) and 6), you should not see the linked item
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Tue, 18 Dec 2018 15:43:00 +0000 (12:43 -0300)]
Bug 13515: Add a foreign key constraint to messages.borrowernumber
This patch adds a missing foreign key constraint to
mesages.borrowernumber.
To create it sucessfully the entries from the messages table that are
not linked with an existing patron will be removed.
Test plan:
0/ Do not apply the patch
1/ Add messages to different patrons
2/ Delete one of the patron's record
3/ Have a look at the messages table and notice that the messages for
the deleted patron's record still appear
4/ Apply the patch and execute the update DB entry
5/ Have a look again at the messages table and notice that the messages
for the deleted patron's record have been removed
6/ Delete a patron that have messages
7/ Notice that now the messages are deleted when the patron's record is
deleted
Signed-off-by: Nazlı Çetin <nazli@devinim.com.tr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 14 Feb 2019 18:00:30 +0000 (15:00 -0300)]
Bug 22301: (bug 11373 follow-up) Do not format amounts in inputs
on_edition flag must be set when the Price plugin is used on inputs.
Prices currently need to all be displayed with decimal dot in input
fields.
Test plan:
Trying to pay 9,55. Go into the input field and change 9 to
5.
Without this patch Koha will turn it into 555.00.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sat, 5 Jan 2019 06:45:05 +0000 (06:45 +0000)]
Bug 22116: Add price formatting to rental charge and replacement price on items tab in staff
Adds formatting to replacement price and rental charge on items
tab.
To test:
- Add a rental charge to one or more of your item types
- Edit a record with some items, add replacement cost to some
- Find or create a record with your rental charged itemtype (MARC21:942$c)
- Go to the staff detail page of those records
- Check "Items" tab for
- Rental charge on top
- Replacement price for items
- Verify information is displayed correctly when toggling CurrencyFormat
system preference
Signed-off-by: Jack Kelliher <jke0429@stacmail.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Mon, 4 Feb 2019 23:42:34 +0000 (00:42 +0100)]
Bug 21441: Fix wrong reference to a 'holds' table on system information tab
It looks like a typo snuck in on the about page, listing a holds
table instead of reserves.
To test:
- Manually create the same PK (reserve_id) in reserves and old_reserves
- Verify that the message on about > system information now
correctly lists those tables (not holds and old_reserves)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jasmine Amohia [Wed, 16 Jan 2019 01:37:22 +0000 (01:37 +0000)]
Bug 21840: Fixed some typos in the templates
intranet-tmpl/prog/en/modules/ill/ill-requests.tt:13
Bibliograpic record ID --> Bibliographic record ID
intranet-tmpl/prog/en/modules/acqui/basket.tt:547
Can't cancel order, ([% books_loo.holds_on_order | html %]) holds are linked with this order cancel holds first --> ... with this order. Cancel holds first
intranet-tmpl/prog/en/modules/acqui/parcel.tt
Can't cancel order, ([% loop_order.holds_on_order | html %]) holds are linked with this order cancel holds first --> ... with this order. Cancel holds first
intranet-tmpl/prog/en/modules/labels/spinelabel-print.tt:32
Print this slabel --> Print this label
Test plan:
1. Check that the fixes in the patch are correct
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Thu, 20 Dec 2018 23:37:02 +0000 (23:37 +0000)]
Bug 22009: Fix error messages for filing rules and splitting rules.
Some error messages were doubled up with different error codes.
To test:
I am not sure how to trigger those from the GUI, might
require a code review/code changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sun, 13 Jan 2019 09:06:22 +0000 (10:06 +0100)]
Bug 22119: Add price formatting in more places in circulation
This adds some missing Price filters to some places in circulation.
To check verify the amount are displayed according to setting
of CurrencyFormat (use FR or CH for seeing a change)
Use a patron account with no pending fines at the beginning
for all tests.
1)
- Switch RentalFeesCheckoutConfirmation to "Ask"
- Check out an item with a rental charge
- Verify message is formatted correctly:
Rental charge for this item: ...
2)
- Switch RentalsInNoissuesCharge to "Don't include"
- Make sure patron has only Rental fines on their account
- Check out another item
- Verify message is formatted correctly:
The patron has unpaid charges for holds, rentals etc ...
3)
- Switch BatchCheckouts to "Allow"
- Add the patron category of your test patron to BatchCheckoutsValidCategories
- Checkout any item
- Verify the message in the information column is formatted correctly:
The patron has unpaid charges for holds, rentals etc of ...
Signed-off-by: Jasmine Amohia <jasmineamohia.student@wegc.school.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sat, 5 Jan 2019 17:39:42 +0000 (17:39 +0000)]
Bug 22121: Display 'Price paid' on ILL requests according to CurrencyFormat pref
To test:
- Install BLDSS backend
see: https://wiki.koha-community.org/wiki/ILL_backends
- Add a new BLDSS ILL request
- Edit ILL request
- Fill in Price paid field
- Verify Price paid is formatted correctly on 'Manage ILL request'
page
Signed-off-by: Ethan Amohia <ethan.amohia@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sun, 13 Jan 2019 10:15:27 +0000 (11:15 +0100)]
Bug 22120: Add price formattig to patron summary print
The patron summary print lists the replacement prices
and rental charges of items and totals them. With this
patch they will be formatted according to the
CurrencyFormat system preference.
To test:
- Find or create a patron with some checkouts
- Make sure some items have replacement price set
and some have a rental charge
- "Print summary" from the account in staff
- Verify that charges and prices in the checkouts
table are formatted correctly
- Toggle CurrencyFormat to different settings
Signed-off-by: helene hickey <hickeyhe@wgc.school.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Mon, 14 Jan 2019 05:41:48 +0000 (05:41 +0000)]
Bug 17347: Ignore whitespace before and after on renewing
When an item is checked out, Koha ignores whitespace
at the beginning and the end of the entered barcode.
This makes life easier, if a barcode is C&P from another
page. This patch makes the renewal page behave the same.
To test:
- Checkout an item
- Renew the item from the renew tab or renewal page
entering the barcode with leading and trailing
whitespace
- "Barcode not found"
- Apply patch
- Try again
- Barcode should be found now
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Devinim <kohadevinim@devinim.com.tr> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Pasi Kallinen [Tue, 27 Nov 2018 09:53:32 +0000 (11:53 +0200)]
Bug 21885: Calendar to-date starts before end-date
When adding new holidays to the calendar, you pick the start date,
and then the end date, but the end date calendar will start from
current date, not from the picked start date. Sometimes this means
many extra clicks to pick an end date.
Make the end date calendar start from the beginning date by default.
Test plan:
1) Go to the tools -> calendar
2) Pick a start date somewhere in the future, and then open the
end date calendar. Notice how it starts before the start date
of the date range.
3) Apply patch.
4) Pick a start date in the future. The end date calendar should
automatically default to the same date.
5) Change the start date a day backwards, note how the end date
does not change.
6) Change the start date after the end date, note how the end date
adjusts, so it is not in the past.
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22238: Remove koha-*-sip scripts in favor of koha-sip
This patch removes traces from the (deprecated) koha-*-sip scripts.
To test:
- Apply the patch
- Verify no traces of koha-*-sip remain on the codebase (besides
Release Notes, koha-common.links and the koha-sip script):
$ cd kohaclone
$ git grep koha-start-sip
$ git grep koha-stop-sip
$ git grep koha-enable-sip
=> SUCCESS: No traces!
- Create the following symlinks:
$ sudo ln -s /usr/sbin/koha-sip /usr/sbin/koha-start-sip
$ sudo ln -s /usr/sbin/koha-sip /usr/sbin/koha-stop-sip
$ sudo ln -s /usr/sbin/koha-sip /usr/sbin/koha-enable-sip
- Try the koha-*-zebra commands:
$ sudo koha-stop-sip kohadev
$ sudo koha-start-sip kohadev
$ sudo koha-restart-sip kohadev
=> SUCCESS: They all work as expected!
- Sign off :-D!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22235: (follow-up) Make koha-remove stop SIP server if required
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22235: Make maintenance scripts use koha-sip instead of koha-*-sip
This patch makes all maintenance scripts use **koha-sip** instead of
the old **koha-*-sip** scripts.
To test:
- Run:
$ perl misc4dev/cp_debian_files.pl
$ sudo service koha-common stop
=> SUCCESS: No errors and the SIP-related sevices are stopped
$ sudo service koha-common start
=> SUCCESS: No errors and the SIP-related services are started
$ sudo service koha-common restart
=> SUCCESS: No erros and SIP-related services are running
$ sudo koha-create --create-db test
$ sudo koha-sip --enable test
$ sudo koha-sip --start test
$ sudo koha-disable test
=> SUCCESS: No errors, instance disabled, no SIP running for test
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
- Run:
$ source debian/koha-common.bash-completion
$ sudo koha-sip <tab>
- Play with all the options
=> SUCCESS: The combinations make sense (e.g. only SIP-enabled instances
are completed for --start, --stop, --restart, -v and --verbose are not
offered if the other one is already in there, --enable only applies to
SIP-disabled instances, etc).
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
- Apply this patch
- Run:
$ kshell
k$ prove xt/verify-debian-docbook.t
=> SUCCESS: Tests pass!
- Run:
$ misc4dev/cp_debian_files.pl
$ man koha-sip
=> SUCCESS: The man page shows correctly.
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It adds a function called is_sip_running to koha-functions.sh.
To test:
- Apply this patch
- Run:
$ misc4dev/cp_debian_files.pl
$ sudo koha-sip --enable kohadev
$ sudo koha-sip --start kohadev
$ sudo koha-sip --status kohadev
=> SUCCESS: The SIP server is running for kohadev
- Run:
$ sudo koha-sip --restart --verbose kohadev
$ sudo koha-sip --status kohadev
=> SUCCESS: The SIP server is running for kohadev
- Run:
$ sudo koha-sip --stop kohadev
$ sudo koha-sip --status kohadev
=> SUCCESS: The SIP server is not running for kohadev
- Play with other combinations like enabling an already enabled
instance, etc. Remember you need to remove the
/etc/koha/sites/kohadev/SIPconfig.xml file so it is considered disabled.
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 8 Feb 2019 12:52:48 +0000 (12:52 +0000)]
Bug 22293: Sticky toolbar making vendor form uneditable
The new floating toolbar plugin doesn't like a particular combination of
markup: A toolbar inside a form which is styled "display:inline." The
staff client CSS styles forms that way globally, so it must be
explicitly overridden in these situations.
Changing the default will have broad consequences, so I propose an
inline style to fix this.
To test, apply the patch and go to Acquisitions. Add or edit a vendor
and confirm that after scrolling down the page the form is still
editable.
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com> Signed-off-by: Mikaël Olangcay Brisebois <mikael.olangcay-brisebois@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Liz Rea [Thu, 31 Jan 2019 22:41:29 +0000 (22:41 +0000)]
Bug 22282: Fix PDF issue when exporting PDF in French format.
Fixing up QA comments, keeping 1st instance and removing the 2nd.
Original test plan by Christophe Croullebois.
To test :
Without the patch :
1° select in Acquisitions preferences/OrderPdfFormat French 3-page
2° restart plack if needed
3° In acqui/basketgroup.pl select closed tab
4° Click on "Export as PDF" button
5° You should see a blank page saying "Internal Server Error"
With the patch :
Do the same
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Mon, 14 Jan 2019 12:47:25 +0000 (12:47 +0000)]
Bug 22110: Fix editing of adjustments for CurrencyFormat != US
When using CurrencyFormat FR or CH the editing an amount behave
badly. Example: changing displayed 1,00 to 1,11 would save as 1,00.
At the moment Koha only understands decimal dot, not comma.
So every time data is entered, we use decimal dot.
1) Add an adjustment to an invoice
2) Change system preference CurrencyFormat to FR or CH
3) Verify the amount displays with a decimal comma
4) Try changing the amount to something like 1,11
5) Save the amount
6) Verify it shows 1.00
7) Apply patch
8) Refresh the invoice page if necessary
9) Verify amount is now shown as 1.00
10) Repeat test, use 1.11
11) Verify it will be stored correctly.
Signed-off-by: Mackey Johnstone <mackeyfj@gmail.com> Signed-off-by: mikael <mikael.Olangcay-Brisebois@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Wed, 6 Feb 2019 12:49:58 +0000 (12:49 +0000)]
Bug 22278: Clear cache when creating new report groups or subgroups
When a user adds a new group we create it, then fetch the groups from the cache. However, we aren't clearing the cache on creation. This patch fixes that
To test:
0) Start a new report
1) Pick create for the group
2) Enter code and value
3) Save
4) You remain on the page and value and code are now empty (ok)
5) BUT: The pull down for the group remains "None" instead of reflecting
the new group
6) Open a new tab and browse to reports - note the group exists and the report is in it
7) On original tab save report again, the group was not selected so is lost
8) Apply patch
9) Retest with a new report
10) Group is created, saved, and selected upon save
11) Subsequent edits include the new group
12) Test with subgroups as well
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Alex Arnaud [Fri, 4 Jan 2019 15:33:39 +0000 (16:33 +0100)]
Bug 21738: make call of CanBookBeReserved more safe
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Alex Arnaud [Tue, 13 Nov 2018 08:44:51 +0000 (09:44 +0100)]
Bug 21738: check items count in C4:ILSDI::HoldTitle
Test plan:
- Try holding a title without items via ILS-DI
(cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=1&bib_id=1),
- you get an error,
- apply this patch,
- try again,
- you should get the code "Notitems"Bug 21738: check items count in
C4:ILSDI::HoldTitle
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This fixes the regression that multiplies the amount entered by 100
when CurrencyFormat is set to FR. It replaces the last dot with a
comma before dealing with the value of ActualCost and ReplacementCost.
Test Plan:
a)Replicate the issue:
0- Set CurrencyFormat to FR
1- Go to Acquisitions
2- Search for a Vendor
3- Click on "New basket"
4- Give basket a name and click "Save"
5- Click on "Add to basket"
6- Add an order through preferred method
7- In Accounting details, enter a vendor price with dot decimal (i.e. 19.44)
8- Save your order line
9- Click on "Close this basket"
10- Confirm closing of basket by clicking on "Yes, close"
11- Click on "Receive shipment"
12- Enter an invoice number and click "Next"
13- Click on "Receive" to the right of your order
14- In Accounting details, notice the Actual cost is written with a decimal dot.
15- Change the Actual cost, using a dot decimal (i.e 20.99)
16- Receive the order
17- Click on "Save"
18- In "Already received" notice the price is multiplied by 100 (i.e. 2099,00)
19- Click on "Cancel receipt"
20- Click on "Receive" to the right of your order
21- In Accounting details, change the Actual cost, using a comma decimal (i.e. 20,99)
22- Receive the order
23- Click on "Save"
24- In "Already received", notice the price is correct.
b)Apply the patch
c)Test the patch:
1- Click on "Cancel receipt"
2- Click on "Receive to the right of your order
3- Change the Actual cost/Replacement cost, using a dot decimal (21.99)
4- Receive the order
5- Click on "Save"
6- Notice that the Actual cost and the Replacement cost use commas
7- Change the Actual cost, using a comma decimal (21,99)
8- Click on "Save"
9- In "Already received", notice the price is still correct.
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: helene hickey <hickeyhe@wgc.school.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 21446: Improve display of changed values on course reserves and show permanent location instead of cart
TO TEST:
1) Set ReturnToShelvingCart on.
2) Create a Course Reserve and make inactive.
3) Add an item, changing Item type, Collection code, Shelving
location, and Holding library.
4) Note these four fields in the item list.
5) Activate course reserve.
6) Note subtle/no difference in these fiels in the list.
7) Check in the item.
8) Go back to course reserves and note that the cart is listed in the
field instead of permanent location.
9) Deactivate course reserve.
10) Reset permanent location on item manually.
11) Apply patch.
12) Repeat steps 4-9 noting that the permanent location is showing
instead of current location.
Also, if a change is assigned to the item, the change AND
the regular state always show. The active state will be in
bold.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Aleisha Amohia [Wed, 19 Dec 2018 20:32:32 +0000 (20:32 +0000)]
Bug 20000: Use Modern::Perl in installer scripts
To test:
Check that we are using Modern::Perl when strict *and* warnings were used before,
and commented lines and FIXMEs have been removed from the rest, out of
files listed below.
Sponsored-by: Catalyst IT Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 11 Jan 2019 16:05:12 +0000 (16:05 +0000)]
Bug 11373: (follow-up) Add "change calculation" feature to the fine payment forms
This patch provides some follow-ups, including corrections to the
JavaScript and updates to the text for readability.
- Remove obsolete script "type" attribute
- Update the use of the obsolete jQuery method "bind"
- Use Bootstrap's built-in "show" option instead of simulated click
- Handle preventDoubleFormSubmit function's "waiting" class if modal is
closed manually
To test, apply the patch and follow the original test plan. Everything
should work as expected.
Note that when the modal is shown, the cursor changes to the "waiting"
one when you hover over the body of the page. If you click "No" in the
modal, the cursor should return to normal.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Frédérick [Tue, 10 Dec 2013 21:51:39 +0000 (16:51 -0500)]
Bug 11373: Show the difference between the amount collected and the amount paid of a fine payment.
This patch adds a feature in the fine payment section. It allows to see the change due to patrons when the amount collected is higher than the amount paid.
Test plan :
- Apply patch.
- Select a patron with a fine.
- Go to Fines > Pay fines.
- Click the button pay.
- Choose the amount paid equal to the outstanding amount (exemple : 3$).
- Choose the amount collected to be more than the outstanding amount (exemple : 5$).
- Confirm that the change is correct (example : 5$ - 3$ = 2$).
- Click the button confirm.
- Click on Yes in the dialog box.
- Confirm that the payment has been made (example : last amount = 3$).
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 1 Feb 2019 14:12:18 +0000 (14:12 +0000)]
Bug 22195: (follow-up) Add text labels to buttons if window is wide enough
This patch adds responsive handling of text labels to the columns
configuration and export buttons.
To test, apply the patch and clear your browser cache if necessary.
- View a page with column configuration, e.g. Administration -> Patron
categories.
- At wider browser widths the buttons should have text labels.
- At narrower browser widths the labels should be hidden.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Sat, 26 Jan 2019 19:20:32 +0000 (19:20 +0000)]
Bug 22195: (follow-up) Add tooltip to buttons
This patch adds title attributes and Bootstrap tooltips to the columns
configuration and export/print butttons.
To test, apply the patch and visit a page with columns configuration
buttons. Confirm that when you hover over each of the DataTable control
buttons a tooltip is shown.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 23 Jan 2019 16:40:44 +0000 (16:40 +0000)]
Bug 22195: Change default DataTables configuration to consolidate buttons
This patch changes the default DataTables configuration provided by the
columns settings include file. It consolidates DataTables buttons into
to menus: One for column configuration and one for export options.
This change would not affect tables which aren't set up for column
configuration.
To test, apply the patch and view a page with columns configuration.
Example: Tools -> Notices & slips
- Confirm that the buttons appear as expected.
- Confirm that each button menu performs its task correctly (column
visiblity, export, print).
- Test other pages with columns configuration. For instance:
Acquisitions order search, Currencies administration, Holds queue
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 28 Jan 2019 18:46:41 +0000 (18:46 +0000)]
Bug 21850: (follow-up) Add query information in title attribute
This follow-up adds back the old machine-friendly search details to a
title attribute in case it might be useful for debugging purposes.
To test, apply the patch and perform a search in the OPAC. On the search
results page, hover your mouse over the "Results" link in the
breadcrumbs. The title attribute value should appear with the search
details.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 4 Jan 2019 15:26:05 +0000 (15:26 +0000)]
Bug 21850: Remove search request from page title of OPAC result list
This patch modifies the OPAC search results template so that advanced
search terms are not shown in the page title and breadcrumbs. This
removes potentially confusing computer-oriented code from the public
view.
For simple searches the search term is displayed, using the same logic
that determines whether the search bar should be populated with the last
search term.
To test:
- Apply the patch
- Peform a simple keyword search in the OPAC
- On the results page the title and breadcrumbs should show 'Results
of search for [your keyword]
- Perform an advanced search with multiple parameters
- The page title and breadrumbs should show only 'Search results'
- The breadcrumbs should also show a link back to Advanced search
using the returntosearch parameter
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: mikael <mikael.Olangcay-Brisebois@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 14 Sep 2018 17:06:31 +0000 (17:06 +0000)]
Bug 20809: (follow-up) Add missing JS to view log page
If the log viewer is being used to track patron-related data the
patron-related JavaScript file should be included.
To test, apply the patch and open a patron record. In the left-hand
sidebar choose Modification Log. Test the patron image edit/replace
process from the patron image in the sidebar and confirm that it works
correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 12 Sep 2018 16:33:48 +0000 (16:33 +0000)]
Bug 20809: (follow-up) Corrections to CSS and JS
This follow-up modifies JavaScript so that the confirmation dialog is
triggered when deleting a patron image from the modal window.
The CSS is modified to improve the alignment of patron image and edit
button.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 14 Aug 2018 13:04:39 +0000 (13:04 +0000)]
Bug 20809: Link patron image to patron image add/edit form
This patch modifies an include file so that it is possible with edit a
patron's image on any patron-related page which uses that include.
To test you must have the patronimages system preference enabled.
Apply the patch and open any patron record for viewing.
- Hover the mouse over the patron image.
- If the patron has a previously-defined patron image, should you see
an "Edit" button appear. Clicking the button should display a modal
dialog titled "Edit patron image." Test that the "Upload,"
"Delete," and "Cancel" buttons work correctly.
- If a patron has no patron image defined, you should see an "Add"
button appear. Clicking the button should display a modal
dialog titled "Edit patron image." Test that the "Upload,"
"Delete," and "Cancel" buttons work correctly.
This process should work from any page which shows the patron sidebar:
Check out, Details, Fines, Routing lists, Circulation history, etc.
Patch works as described.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Mon, 12 Nov 2018 10:48:23 +0000 (11:48 +0100)]
Bug 21808: Field 711 is not handled correctly in showAuthor XSLT for relator term or code
The test should check $4 or $e for fields ne 111,711.
And should check $4 or $j for 111,711.
Test plan:
Edit a record, add a meeting in 711 without $4 but with $j.
Without this patch the term is not visible, with this patch it is.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Thu, 10 Jan 2019 19:32:22 +0000 (14:32 -0500)]
Bug 22097: CataloguingLog should be suppressed for item branch transfers
Bug 18816 missed the fact that a branch transfer triggers ModItem and
thus generates an action log line. We should not be creating those
action logs, especially considering the transfers table itself already
documents the transfer.
Test Plan:
1) Enable CataloguingLog
2) Transfer an item to another branch
3) Note the new action log line created
4) Apply this patch
5) Create another item transfer
6) No new action log line should be created!
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 24 Jan 2019 13:48:42 +0000 (13:48 +0000)]
Bug 22197: Add Mana KB link to administration sidebar menu
This patch adds a link to the Mana KB configuration page to the
administration sidebar menu.
To test, apply the patch and:
- Log in to the staff client as a user who lacks permission to manage
Mana KB.
- Go to an Administration page which shows the sidebar, like
Libraries or Patron categories. There should be no link to Mana KB
in the left-hand sidebar.
- Log in to the staff client as a user who has permission to manage
Mana KB.
- Go to Administration -> Mana KB
- In the sidebar menu you should see a link to Mana KB and it
should be bold.
- Navigate to another Administration page which shows the sidebar.
The Mana KB link should not be highlighted.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 24 Jan 2019 13:47:26 +0000 (13:47 +0000)]
Bug 22198: Add granular permission setting for Mana KB
This patch adds a separate permission for managing Mana KB.
To test, apply the patch and update the database.
- Open the permissions page for a patron with staff client privileges
- Confirm that there is a "Manage Mana KB content sharing
(manage_mana)" permission.
- Leaving this new permission unchecked, log into the staff client
with as that patron and go to the Administration home page.
- The "Using Mana-KB" link should not appear.
- Navigate directly to /cgi-bin/koha/admin/share_content.pl. You
should get a "permission denied" message.
- Modify the patron's permissions to grant them access to Mana KB.
- Confirm that the link now appears on the Administration home
page and that the user can access the page.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 23 Jan 2019 17:56:50 +0000 (17:56 +0000)]
Bug 22196: Clean up Mana KB administration template
This patch makes language changes to the Mana KB administration
template, and corresponding language changes to the Web Services
preference file.
Some markup errors have been fixed:
- Correct title and breadcrumbs, copied and pasted from another
template
- Add ids to form fields to match their label "for" attributes
- Make <input>s self-closing
- Correct class names on alert dialogs
- Wrap text in JavaScript with _() to make it translatable
Also changed: Some language revisions to the Mana dialogs on the
Administration home page.
To test, apply the patch and go to Administration -> Share content with
Mana KB.
Test the process for enabling and configuring Mana KB. Check that
forms work correctly and that the language of instructions and labels
reads well.
Go to Administration -> System preferences -> Web services, and confirm
that the language changes to the Mana KB preference look good.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Tue, 11 Dec 2018 13:13:42 +0000 (10:13 -0300)]
Bug 21907: Fix article requests count for non-superlibrarians
The query generates "Column 'branchcode' in where clause is ambiguous"
Test plan:
1 - Enable 'IndependentBranchesPatronModifications' and article requests
2 - Sign in as non-superlibrarian
3 - View plack log
4 - Refresh mainpage, see error in logs
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 3 Oct 2018 16:07:19 +0000 (16:07 +0000)]
Bug 16231: Correct permission handling in subscription edit
This patch corrects the way subscription edit menu items are displayed
according to the user's permissions settings.
To test, apply the patch and log in to the staff client as a user who
has permission to create, edit, and delete subscriptions.
- Locate an subscription and view the details for it.
- Confirm that each "Edit" menu item works correctly.
- Repeat the process when logged in as a user with varying combinations
of create, edit, and delete permissions.
- Test as a user limited by IndependentBranches.
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Fri, 1 Feb 2019 09:55:54 +0000 (09:55 +0000)]
Bug 22254: Correction to datehandling in test
Adding 13 months is not always the same as adding 1 month and then
adding 12 months in DateTime maths. This patch rectified the test
to match the correct behaviour in koha.
Test plan.
1) Modify the test (around line 268) to test against the suspect
leap date of 2019-01-31 and watch the test fail.
2) Apply the patch (which also adds this modification to test
for such a leap date) and watch the test now pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 4 Jan 2018 15:00:28 +0000 (15:00 +0000)]
Bug 19915: Use cn_sort values for getting inventory items
To test:
1 - Catalog an item under LCC with callnumber GT95
2 - cn_sort should calculate as GT0095
3 - Go to inventory tool
4 - Enter a range that should have your item e.g LC GT90 to GT100
5 - Item is not returned
6 - Apply patch
7 - Item should be returned
8 - Verify things otherwise work as expected
Signed-off-by: Anne-Claire Bernaudin <anne-claire.bernaudin@univ-rennes1.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
https://bugs.koha-community.org/show_bug.cgi?id=19905
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 19915: (QA follow-up) Tidy up GetItemsForInventory.t
Standard edits like modules, schema, Koha objects instead of DBIC.
Removing unneeded autoflush.
Moving initial test to a first subtest.
No need to clear issues if you clear items.
Adding a FIXME for OldWay; would be nice to remove that code..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
https://bugs.koha-community.org/show_bug.cgi?id=19905
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Anne-Claire Bernaudin <anne-claire.bernaudin@univ-rennes1.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Moved the betwen typo edit back here.
Marcel de Rooy [Wed, 30 Jan 2019 15:37:10 +0000 (15:37 +0000)]
Bug 22236: Translation should generate tags with consistent attribute order
When running misc/translator/translate, the order of attributes in the translated templates is not consistent and may vary. This is caused by the random order of hash keys in perl.
This causes things like this in run 1:
<input type="submit" class="btn" value="Plaats aanvraag" />
And this in run 2:
<input value="Plaats aanvraag" type="submit" class="btn" />
As you can see, there is actually no difference apart from the order.
When comparing the result of various translation runs, I would rather get rid of such noise and only see the real changes.
The needed change is not trivial to find, but only requires a simple addition to a sort operation in tmpl_process3.pl. The current sort only makes sure that the '/' comes at the end. We should sort the names of the keys too when this value is 0 (just meaning: no end tag symbol).
Test plan:
[1] Run a translation without this patch and set a few templates aside.
[2] Run a translation with this patch.
[3] Run a compare (diff) on the templates copied in step 1. Verify that the
only changes are found in the sort order of attributes in html tags.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 28 Jan 2019 13:28:30 +0000 (13:28 +0000)]
Bug 21751: (follow-up) Correction to selectors
This patch makes a couple of corrections to the selectors used by
hcsticky in targeting the position of the floating toolbar. These
changes were made necessary by changes made in recently-pushed patches.
To test, confirm that these two pages work correctly:
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 6 Dec 2018 17:54:58 +0000 (14:54 -0300)]
Bug 21751: Remove former fixFloat plugin
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 6 Dec 2018 17:15:49 +0000 (17:15 +0000)]
Bug 21751: Replace fixFloat with HC-sticky to fix Chrome display
This patch replaces the fixFloat jQuery plugin with a new one: HC-sticky
(https://github.com/somewebmedia/hc-sticky). This plugin provides the
same functionality without the page-reflow problems fixFloat suffers
from.
To test, apply the patch and regenerate the staff client CSS. Test the
behavior of the floating toolbar on these pages:
- Acquisitions -> Vendor -> Vendor details
- Acquisitions -> Vendor -> View basket
- On both these pages, test toolbar behavior before and after
expanding the "Orders search" options at the top of the page.
- Administration -> System preferences
- Authorities -> Create or edit an authority
- Catalog -> Advanced search
- Search results
- Catalog -> Item search
- Cataloging -> Add or edit a record
- Open the plugin window for the 008 field
- Tools -> Label creator -> New label batch -> Add items -> Search ->
Results
- Patrons -> New patron
- Test before and after expanding the patron search options at the
top of the page
- Test editing a patron too
- Tools -> Automatic item modifications by age -> Edit
- Tools -> Notices & slips -> Edit
- Lists -> View list
Check that the About page has been updated with information about the
plugin.
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Thu, 31 Jan 2019 08:12:13 +0000 (09:12 +0100)]
Bug 22242: Javascript error in value builder cased by Select2
Same as Bug 17780 but in value builders.
Select2 (Bug 13501) introduced divs and inputs that broke some
assumptions about the expected HTML structure. This patch checks if
input has name attribute, because some inputs in Select2 have not.
It brakes value builders marc21_linking_section.tt and
unimarc_field_4XX.tt.
Test plan :
1) On a MARC21 database
2) Define 774$0 as a regular subfield
3) Define 774$4 with an authorised value category
4) Define 774$t with value builder marc21_linking_section
5) Create a new record
6) Use value builder in 774$t
7) Search for a record and click choose
8) Without patch : a popup window does not close and show a blank
screen
9) With patch : popup windows get close and you see in field 774 $0 and
$t field with values
10) Same tests with a UNIMARC database on field 461 with value builder
unimarc_field_4XX.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested successfully with MARC21
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch implements the dateonly option for the rfc3339. This is
described in the OpenAPI 2.0 specification [1]. The required output
format is described on RFC 3339 [2], as 'full-date'.
To test:
- Apply the regression tests patch
- Run:
k$ prove t/DateUtils.t
=> FAIL: Tests fail because dateonly is not implemented
- Apply this patch
- Run:
k$ prove t/DateUtils.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds tests for the rfc3339 behaviour when dateonly => 1.
To test:
- Run:
$ kshell
k$ prove t/DateUtils.t
=> SUCCESS: Tests pass
- Apply this patch
- Run:
k$ prove t/DateUtils.t
=> FAIL: dateonly is not implemented
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22253: Check we actually need to update the password
This patch makes memberentry.pl check if password needs to be updated
before attempting to call set_password. Above this there's a check that
won't raise any errors if no password is passed, or the default string (****) is received.
So we could reach that line of code with no password, but the code
wouldn't check that.
To test:
- In master, edit any patron without changing the password
=> FAIL: It raises an exception
- Apply this patch
- Edit the patron withtout changing the password
=> SUCCESS: Edit successful
- Edit the patron, changing the password
- Try to login with the new password
=> SUCCESS: The password got changed correctly
- Sigh off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Fri, 19 Oct 2018 11:22:20 +0000 (08:22 -0300)]
Bug 21610: Improve default values for dates
This patch fixes failures on t/db_dependent/Koha/Patrons/Import.t
and keep t/Auth_with_shibboleth.t and t/db_dependent/Koha/Object.t green
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Fri, 19 Oct 2018 10:14:20 +0000 (12:14 +0200)]
Bug 21610: (follow-up) Default value for dates
We have some dates with DEFAULT CURRENT_TIMESTAMP and some dates with
default and UPDATE clause.
Test plan:
Run Object.t again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Fri, 19 Oct 2018 09:05:50 +0000 (11:05 +0200)]
Bug 21610: (QA follow-up) Better use columns_info from DBIx
We should better use the published method than a private hash key.
And shorter to go via _result than adding a new schema call.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 18 Oct 2018 21:55:44 +0000 (18:55 -0300)]
Bug 21610: Fix integers and dates values at Koha::Object->store level
With strict SQL modes, we are facing several issues when objects are stored.
The following errors can be raised by DBIx::Class when an object does not have
a valid (as defined at DB level) value:
- Incorrect integer value: '' for column COLUMN
- Incorrect decimal value: '' for column COLUMN
- Column 'COLUMN' cannot be null
- Field 'COLUMN' doesn't have a default value
- Incorrect date value: '' for column 'COLUMN'
We already handled some of them for Koha::Patron. As we do not want to provide such
changes for all Koha::* modules we are going to fix this at Koha::Object->store level
in order to provide a global fix.
This is related to bug 21599 (for item types) and bug 21596 (for patrons)
Test plan:
- Apply first patch, run the tests
=> Patch fail because of the previous error in Koha::ItemType->store, to make them pass
you can replace
$self->notforloan(0) unless $self->notforloan;
with
$self->notforloan(undef) unless $self->notforloan;
- Apply second patch, run the tests
=> They fail because of dates and/or integers values
- Apply third patch, run the tests
=> They now pass
Deep code review wanted!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 18 Oct 2018 21:46:30 +0000 (18:46 -0300)]
Bug 21610: Remove specific changes we made previously
We handled integers and dates for Koha::Patron and Koha::ItemType, we
want now Koha::Object to deal with.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 18 Oct 2018 21:38:18 +0000 (18:38 -0300)]
Bug 21610: Add tests
Adding few tests to Koha/Object.t in order to highlight what we are
trying to fix.
Note that Koha::ItemType->store was wrong for notforloan, the default
value should be null
`notforloan` smallint(6) DEFAULT NULL,
but the previous fix (bug 21599) made it default to '0'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
projects / koha.git / log