Changed each of the pages in the catalogue and tags folders to have one
<h1> tag showing that describes the page, rather than the <h1>
describing the logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to each of the pages in the catalogue and tags folders and check
that they have an obvious and descriptive heading
4) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Changed each of the pages in the offline_circ, patroncards, plugins,
pos, reserve, rotating_collections folders to have one <h1> tag showing
that describes the page, rather than the <h1> describing the logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to each of the pages in the offline_circ, patroncards, plugins,
pos, reserve, rotating_collections folders and check that they have
an obvious and descriptive heading
4) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Changed each of the pages in the installer and onboarding folders to
have one <h1> tag showing that describes the page, rather than the <h1>
describing the logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Ensure that the page source shows logo inside <div> and not inside
<h1>
4) Go to each of the pages in the installer and onboarding folders and
check that they have an obvious and descriptive heading
5) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Changed each of the pages in the authorities, clubs, common,
course_reserves folders to have one <h1> tag showing that describes
the page, rather than the <h1> describing the logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to each of the pages in the authorities, clubs, common,
course_reserves folders and check that they have an obvious and
descriptive heading
4) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Changed each of the pages in the labels and members folders to have one
<h1> tag showing that describes the page, rather than the <h1>
describing the logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to each of the pages in the labels and members folders and check
that they have an obvious and descriptive heading
4) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Changed each of the pages in the circ folder to have one <h1> tag
showing that describes the page, rather than the <h1> describing the
logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to each of the pages in the circ folder and check that they have
an obvious and descriptive heading
4) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1) Look at Staff Client and the logo
2) Apply patch
3) Check Koha logo moves to the middle of the page when zooming in
4) Ensure page source shows logo inside <div> and not <h1>
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 25815: SIP Checkout: add more information on why the patron is blocked.
Currently, on SIP checkout, Koha only returns "Patron Blocked" when there is
a problem with the patron.
This patch adds more specific informations, with the following messages:
- "Patron expired"
- "Patron debarred"
- "Patron has fines" (see system preference "noissuescharge")
- "Patron blocked" (see system preference "OverduesBlockCirc")
Test plan:
- Try to do a SIP checkout with a patron that is in one of the above situations.
- Check that the displayed message matches the patron's situation.
Owen Leonard [Mon, 11 Apr 2022 17:04:34 +0000 (17:04 +0000)]
Bug 30509: Fix configuration of Notices accordion widget
The jQueryUI upgrade broke the Accordion on the notices edit page. I'm
not sure why, but defining a "header" option in the accordion
configuration fixes it.
To test, apply the patch and test the notices edit page both with and
without TranslateNotices and multiple languages installed. In both cases
the different sections (Email, Print, SMS) should open and close
correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Thu, 14 Apr 2022 10:51:18 +0000 (10:51 +0000)]
Bug 30540: Fix perl critic complaint of leading zeros
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Thu, 14 Apr 2022 08:14:47 +0000 (09:14 +0100)]
Bug 30540: eval on set_time_zone
This patch adds an eval around the call to set_time_zone so that we
don't crash on invalid local dates and instead just keep the passed
floating timezone.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Thu, 14 Apr 2022 09:19:47 +0000 (10:19 +0100)]
Bug 30540: Unit test
This patch adds tests for checking the output_pref method against
a timezone and datetime that would cause an Invalid local time failure
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/DateUtils.t
=> FAIL: The feature is not implemented, tests fail to complete
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 19 Nov 2021 16:13:49 +0000 (16:13 +0000)]
Bug 29483: Further improve performance of script
This patch adds a few tests to cover more cases, and to highlight current functionality.
The script only allows renewal if all outstanding holds can be filled by available items.
This means we can return as soon as we have determined that not all holds can be filled.
I add FIXME and some explanatory comments - I will file a follow-up bug for those, but
I feel we can accept these improvements to the performance and deal with the issues
of how it 'should' work versus how it does work on another report.
To test:
1 - prove -v t/db_dependent/Circulation.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Mon, 15 Nov 2021 13:54:00 +0000 (13:54 +0000)]
Bug 29483: Check ItemsAnyAvailableAndNotRestricted once per patron
ItemsAnyAvailableAndNotRestricted can take a long time and create nested loops.
We can check it once per patron, however, this requires us to flip the loops.
Since an item can only be used once, we now add a check to see if this item has already
been assigned to a borrower.
To test:
1 - Find or create a biblio with 100 items
2 - Place ten 'Next available' holds on a biblio
3 - Set preference 'AllowRenewalIfOtherItemsAvailable' to 'Allow'
Set circ rules 'On shelf holds allowed' to 'If any unavailable'
4 - Checkout one of the items to a patron, backdated to be overdue
5 - Note a long loading time for the patron's checkouts
6 - Apply patch, restart_all
7 - Patron loads much faster
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Thu, 18 Nov 2021 16:11:24 +0000 (16:11 +0000)]
Bug 29483: Unit tests
This patch updates the AllowRenewalIfOtherItemsAvailable tests to
remove deletion of all data, and create specific circ rules for this
test. It adjust several other tests that were relying on the rules from
this test, so thy too create their opwn specific rules.
Additionally, we add tests to cover the case of mutliple items on the record,
and some items cannot fill some reserves.
What is uncovered here is that the same patron is checked twice, so two holds can
be filled, but they only satisfy a single patron
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 1 Apr 2022 15:20:47 +0000 (15:20 +0000)]
Bug 30435: Remove unused MACLES cataloging plugin
This patch removes the files associated with the MACLES cataloging
plugin. The feature is unmaintained.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Wed, 13 Apr 2022 07:24:22 +0000 (08:24 +0100)]
Bug 30518: Correct DateTime maths for needs_advancing
The needs_advancing method prior to this patch used basic DateTime
arithmatic, adding a DateTime::Duration in Days to the Arrival date of
the item and then comparing that to today. This, however, can cause bugs
when the arrival + duration date coincides with a DST boundary and as
such may result in an invalid local date. See
https://metacpan.org/pod/DateTime#Making-Things-Simple for further
details.
This patch updates the code to use the DST safe delta_days method to
count the days between arrival and now instead and then compares this
integer to the defined duration of the stage.
To test:
1. Re-run the unit tests, they should now pass.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Wed, 13 Apr 2022 07:52:02 +0000 (08:52 +0100)]
Bug 30518: Unit test
This patch adds tests for checking the needs_advancing method against
a timezone and datetime that would cause an Invalid local time failure
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/StockRotationItems.t
=> FAIL: The feature is not implemented, tests fail to complete
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This error occurs due to how UpdateStats is called in Koha/Recalls.pm
To test:
1) Enable the UseRecalls system preference and set some random values in
the recalls circulation and fines rules.
2) Find or create an item. Check this item out to Patron A.
3) Log in to the OPAC as Patron B.
4) Find the item you checked out to Patron A. Click the button to place
a recall.
5) Fill out whatever details you like. Click the Submit button. This
should trigger the error.
6) Apply the patch and refresh the page.
7) Confirm the recall has now been requested successfully.
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Tue, 19 Apr 2022 07:30:56 +0000 (08:30 +0100)]
Bug 30410: (follow-up) Instantiate object in unit test
This patch updates the unit test for the BackgroundJob->_derived_class()
private method to instantiate a proper object to work on instead of
calling the type_to_class_mapping method directly as non-object method.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 14 Apr 2022 09:44:36 +0000 (10:44 +0100)]
Bug 30135: (follow-up) Rename accessor in failing test
We renamed the LSQ seqment accessor from 'collection_code' to
'sequenece_code' to more clearly reflect the EDI segment name instead of
the Koha field we had mapped it to. (Especially as that mapping is not
optionally to ccode or location).
However, I forgot to update the corresponding test. This patch does that
update.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Due to a race and a bad rebase, the patrons embeds added on bug 30063
didn't get copied to the parameters secition, thus breaking embedding.
To test:
1. In master, open the patron search page and the inspector
2. Perform a search
=> FAIL: No results
=> FAIL: There's an error 500 in the API response, mentioning embedding
is not allowed
3. Apply this patch
4. Restart all
6. Repeat 2
=> SUCCESS: Results are back!
=> SUCCESS: No more API errors
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 30410: Add a way for plugins to expose tasks they implement
This patch implements a mechanism for plugins to tell Koha they
implement background jobs, by returning a mapping
```
task => class
```
* _task_ is a string that will be used when queueing new tasks, to let
the workers know which class to instantiate to launch the job (a.k.a.
process).
* _class_ is a string for a class name.
For this to work, plugins need to include the 'namespace' attribute in
their metadata. If they don't, they will be skipped when listing the
valid _background jobs_.
After this, high-level methods for letting plugins (easily) enqueue
their tasks will be provided.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Plugins/BackgroundJob.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 11 Apr 2022 15:10:49 +0000 (16:10 +0100)]
Bug 27783: (follow-up) Rename options
Why require `job_`.. it's easiery to just use 'queue' and we have 'job'
from the context of the script we're calling. This also inproves
consistency between the debian commands and the script params.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle M Hall [Mon, 11 Apr 2022 14:09:24 +0000 (14:09 +0000)]
Bug 27783: (QA follow-up) Make dbrev executable
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds queue name handling in is_worker_running and a handy
method to centralize process name handling for queue-specific workers.
To test:
1. Apply this patch
2. Run:
$ source debian/scripts/koha-functions.sh
$ get_worker_name kohadev
kohadev-koha-worker
=> SUCCESS: Default queue means no queue name included
$ get_worker_name kohadev default
kohadev-koha-worker
=> SUCCESS: Default queue means no queue name included
$ get_worker_name kohadev long_tasks
kohadev-koha-worker-long_tasks
=> SUCCESS: Queue name appended to the name
4. Run:
$ perl misc4dev/cp_debian_files.pl \
--koha_dir /kohadevbox/koha \
--gitify /kohadevbox/gitify \
--instance kohadev
5. Run:
$ koha-worker --start --queue oleonard kohadev
=> SUCCESS: Starts!
6. Check:
$ ps waux | grep oleonard
=> SUCCESS: It is running
7. Play with --stop, --restart, --status and different queue names,
including 'default' and without the --queue param as well.
=> SUCCESS: All as expected!
8. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 27783: Rename queues and adjust currently defined jobs
This patch renames the queues so the default is the **real-time** one, and
the other (*long_tasks*) is kept for **long running** tasks.
All current *batch* tasks are explicitly assigned to the **long_tasks**
queue as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Wed, 30 Mar 2022 15:29:17 +0000 (16:29 +0100)]
Bug 27783: (follow-up) Add DB change to installer
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Julian Maurice [Wed, 30 Mar 2022 14:42:55 +0000 (16:42 +0200)]
Bug 27783: Add missing atomicupdate file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Julian Maurice [Wed, 30 Mar 2022 12:21:50 +0000 (14:21 +0200)]
Bug 27783: Replace --job-type by --queue
This patch adds a new column background_jobs.queue, which default to
'default'
By default, new jobs are enqueued into this default queue, and the
background job worker will subscribe to the default queue unless told
otherwise by the --job-queue option
The new job UpdateElasticIndex is automatically enqueued in another
queue named 'index'
So you can have 'default' worker with
misc/background_jobs_worker.pl
and a dedicated indexing worker with
misc/background_jobs_worker.pl --queue index
This is to address bug 27344 comment #15
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Fri, 1 Apr 2022 10:10:05 +0000 (12:10 +0200)]
Bug 27783: Add --job-type to background_jobs_worker.pl
This will let sysop adjust the number of workers and how they want to
manage them.
For instance one could want to have one worker for ES indexation and
another worker for other jobs, to prevent ES index to be stuck behind
bigger batch process.
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Tue, 25 Jan 2022 18:46:44 +0000 (18:46 +0000)]
Bug 29946: Sort Marc profiles alphabetically
To test:
1- Go to Tools > Stage MARC records for import
2- You'll need a MARC file, choose one and hit 'Upload file'
3- Create many Profiles with different names. Add some that include accents/diacritics.
4- Notice that the profiles sort in the order in which you create them
5- Apply patch
6- Try steps 1-2 again
7- Now the dropdown should be sorted alphabetically
8- Make a few more profiles and make sure they are being inserted in the right order alphabetically, including the profiles containing accents/diacritics.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 30481: Drop unique constraint deleteditemsstocknumberidx
Resolves a sync issue between database and schema caused by
differences between structure and upgrades. Note: newer
databases do not contain this index any longer.
Test plan:
Run dbrev.
Check SHOW CREATE TABLE deleteditems.
Verify that unique index has been dropped, regular index added.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Thomas Klausner [Mon, 21 Feb 2022 11:35:15 +0000 (12:35 +0100)]
Bug 30142: Remove spaces from ElasticSearch mapping MARC fields
A first step to "validate" the MARC mappings: Remove all whitespace, so
if a user enters "245a " (with a trailing whitespace, which can easily
happen when copy/pasting) we only store "245a" in the DB. This is
neccessary, because the ES indexer will throw an exception in an invalid
MARC mapping.
Test Plan:
* Go to /cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
* Go to the Bibliographic Records Tab
* Enter "100 a b c " (notice the whitespaces!) in the first "mapping"
field
* Scroll down and save
* Go back to the Bibliographic Records Tab
* The spaces are still there
Now apply the patch
* Repeat the above steps
* After saving you should see "100abc" without any spaces in the
"mapping" field
Sponsored-by: Steiermärkische Landesbibliothek Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 7 Apr 2022 12:25:08 +0000 (14:25 +0200)]
Bug 30485: (bug 30063 follow-up) Display all patrons if not term passed
Regression from bug 30063. If you are searching all patrons (not search term passed) from the header, the patron search result is not displayed.
Test plan:
Go to the Koha homepage, search patrons, don't enter a search term and
click "submit"
All patrons must be returned.
Regression test: on the other patron search forms, confirm that there is
no regression, ie. no patron displayed until you search for something
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Katrin Fischer [Sat, 26 Feb 2022 19:24:55 +0000 (19:24 +0000)]
Bug 30135: (follow-up) Rephrase system preference description to use collection
Avoids ccode in favor of collection in the system preference
description. Also makes it a tiny bit easier to translate.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 21 Feb 2022 17:02:42 +0000 (17:02 +0000)]
Bug 30135: Unit tests
Add a unit test for EdifactLSQ preference.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Fri, 18 Feb 2022 17:15:11 +0000 (17:15 +0000)]
Bug 30135: Add EdifactLSQ mapping preference
This patch adds a new system preference, EdifactLSQ, to allow
configuration of the ambiguous LSQ, sequence code, field included in the
EDIFACT specifications.
Originally the field was hard coded to map to 'location', but as per the
specification it could have been mapped to 'ccode'.
From the specification:
A code or other designation which identifies stock which is to be
shelved in a specified sequence or collection.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Katrin Fischer [Mon, 21 Feb 2022 21:54:31 +0000 (21:54 +0000)]
Bug 30130: (QA follow-up) Fix permission on atomic update file
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 21 Feb 2022 16:21:48 +0000 (16:21 +0000)]
Bug 30130: Unit tests
This patch adds a unit test for the internal 'beginning_of_message'
method in Koha::Edifact::Order to check that the vendor standard
parameter is being interpreted coorectly.
Test plan
1. Run the tests, they should pass
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Fri, 18 Feb 2022 14:38:40 +0000 (14:38 +0000)]
Bug 30130: (follow-up) Set BiC for 'Ulverscroft'
The 'Ulverscroft' supplier is also a BiC follower, this patch adds their
SAN, 5013546031839, to the DB update.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 21 Feb 2022 16:25:24 +0000 (16:25 +0000)]
Bug 30130: Use new standard field in account definition
This patch uses the new 'standard' field to in the edifact account
configuration area to allow setting the message standard as either
'EDItEUR' or 'BiC'.
This just replaces the currently hard coded hash of SAN's in
Koha::Edifact::Order to distinguish between the two standards instead of
requireing a bug submission per vender san we identify to be a BiC type
vendor.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 21 Feb 2022 16:25:53 +0000 (16:25 +0000)]
Bug 30130: DBIC Update
This patch updates the DBIC schema's with the new 'standard' field.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 21 Feb 2022 16:25:44 +0000 (16:25 +0000)]
Bug 30130: Add standard field to edi_account
This patch add a 'standard' field to the edifact account configuration
table to allow setting the message standard as either 'EDItEUR' or 'BiC'.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 21 Feb 2022 11:49:11 +0000 (11:49 +0000)]
Bug 16258: (QA follow-up) Fix columns_settings
Splice out the relevant field from the columns_settings when EDIFACT is
disabled
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Fri, 18 Feb 2022 13:09:59 +0000 (13:09 +0000)]
Bug 16258: (QA follow-up) Capitalise EDIFACT
EDIFACT is an abreviation, so it should be ALLCAPS.
* Electronic Data Interchange for Administration, Commerce and Transport
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves the global 'Edifact' switch into the 'EDIFACT' section
of the sysprefs.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Fri, 18 Feb 2022 12:57:48 +0000 (12:57 +0000)]
Bug 16258: (QA follow-up) Remove superflous comment from sysprefs
This patch removes the errant comment from default syspref SQL.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
As noted by Katrin, this column is only used for Edifact message data
and so can be hidden when Edifact is disabled.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle Hall [Thu, 10 Feb 2022 19:28:17 +0000 (14:28 -0500)]
Bug 16258: (QA follow-up) Include Koha plugin for basket.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle Hall [Thu, 10 Feb 2022 19:21:33 +0000 (14:21 -0500)]
Bug 16258: (QA follow-up) Don't set to off for existing install, they may be using EDI
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle Hall [Thu, 10 Feb 2022 19:18:23 +0000 (14:18 -0500)]
Bug 16258: (QA follow-up) Add a guard to the cron script
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Thu, 10 Feb 2022 15:52:59 +0000 (15:52 +0000)]
Bug 16258: (follow-up) Handle admin-menu.inc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Colin Campbell [Wed, 4 May 2016 12:31:01 +0000 (13:31 +0100)]
Bug 16258: Add a syspref to govern EDIFACT functionality
Adds an "Edifact" systempreference to govern whether edifact processing
is enabled. In most places this is hidden if the current
vendor does not appear in the edi vendors table. This preference
hides the admin screens which define this and a couple of links.
Also fixes an anomaly whereby the basketgroup screen was not
making the same check on whether edi ordering should be enabled as
the basket screen. Both now use the same logic.
Rebased-by: Mark Tompsett <mtompset@hotmail.com> Rebased-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Julian Maurice [Fri, 1 Apr 2022 08:16:09 +0000 (10:16 +0200)]
Bug 30406: Add column filters before hiding columns
The code that adds column filters works only on visible columns, so we
should hide columns after filters are created
Test plan:
1. Apply patch
2. Go to Tables settings. Hide city_state for the cities table.
3. Create some cities and go to the cities page
4. Verify that filtering works as expected.
5. Make the city_state column appear. Verify that filtering on this
column works too
David Cook [Thu, 31 Mar 2022 23:02:35 +0000 (23:02 +0000)]
Bug 30426: Add missing C4::Auth and C4::Output imports
This patch adds missing function imports for C4::Auth and C4::Output
in the opac/svc/suggestion script.
Test plan:
1. Go to http://localhost:8081/cgi-bin/koha/admin/didyoumean.pl
2. Turn on some plugins
3. Go to http://localhost:8080/cgi-bin/koha/opac-search.pl?idx=&q=test&weight_search=1
4. Note in your browser's Network tab that the call to
http://localhost:8080/cgi-bin/koha/svc/suggestion?render=stub&q=test
generates a 200 response instead of a 500 error
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Thu, 17 Mar 2022 12:45:34 +0000 (12:45 +0000)]
Bug 26019: Add two other js cookies
Test plan:
Same as former patch. Use OPAC adv search here.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 11 Feb 2022 15:51:49 +0000 (15:51 +0000)]
Bug 26019: Koha should set SameSite attribute on cookies
This patch modifies the way Koha sets cookies so that the "sameSite"
attribute is explicitly set to "Lax." This option is chosen because it
is the value which is currently assumed by browsers when the sameSite
attribute is not set.
To test, apply the patch and restart services.
- Log in to the staff interface and open your browser's developer tools.
- In Firefox, look for a "Storage" tab.
- In Chrome, look for an "Application" tab.
- Under "Cookies," click the URL of the staff interface.
- You should see all the cookies which are set for that domain.
- The CGISESSID cookie should have sameSite set to "Lax."
- Go to Cataloging -> New record.
- Check the "marcdocs" and "marctags" cookies.
- Switch to the Advanced MARC editor (you may need to enable
theEnableAdvancedCatalogingEditor preference).
- Check the "catalogue_editor" cookie.
- Add a new item to an existing bibliographic record.
- Check the "LastCreatedItem" cookie which is set after you save the
new item.
- Go to Authorities -> Authority search.
- In authority search results, click "Merge" from the "Actions" menu
next to one of the results..
- Check the "auth_to_merge" cookie.
- Go to Administration -> MARC bibliographic framework
- Choose "MARC structure" from the menu corresponding to one of the
frameworks.
- Check the "Display only used tags/subfields" checkbox.
- Check the "marctagstructure_selectdisplay" cookie.
- Go to Circulation -> Check out to a patron with checkouts.
- Check the "Always show checkouts immediately" checkbox.
- Check the "issues-table-load-immediately-circulation" cookie.
- Go to Tools -> Patron clubs. You will need at least one active club
with one or more patrons enrolled.
- From the list of clubs, click Actions -> Search to hold.
- Check the "holdforclub" cookie.
- Go to Tools -> Batch item modification and submit a batch of items.
- Uncheck one or more checkboxes in the "Show/hide columns" area.
- Check the "showColumns" cookie.
- View a patron -> Search to hold.
- Check the 'holdfor' cookie.
- With WebBasedSelfCheck enabled, log in to the self-checkout page.
- Check the "JWT" cookie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Tue, 29 Mar 2022 14:37:30 +0000 (14:37 +0000)]
Bug 29066: (follow-up) Use tooltip when SearchMyLibraryFirst in effect
This patch proposes to add a Bootstrap tooltip to the OPAC masthead's
search field to indicate to the user when SearchMyLibraryFirst is in
effect. I think this lets the form layout stay clean-looking and is more
informative to the user because they don't have to look for the HTML
title tag tooltip.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> Global system preferences.
- Set the OpacAddMastheadLibraryPulldown preference to "Don't add."
- Set the SearchMyLibraryFirst preference to "Limit."
- Go to the OPAC and confirm that the main search field in the masthead
has a filter icon in the background, indicating that searches will be
limited.
- Hover your mouse over the search field and a tooltip should pop up,
"Searching in <library> only"
- The message should also be triggered when you click inside the form
field.
- Change the OpacAddMastheadLibraryPulldown and SearchMyLibraryFirst
preferences again and the form should return to its normal behavior.
Fridolin Somers [Sat, 15 Jan 2022 06:53:54 +0000 (20:53 -1000)]
Bug 29066: (follow-up) add aria-label and aria-hidden on icons
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 29066: Remove text in OPAC search form and use Font Awesome icons
In modern front-end websites, first think you see in header region is an large input text with a search icon.
No need to say it is a search form.
We still tell it in 'title' attribut for accessibility.
This patch removes 'Search' text.
If 'my library first' feature is enabled, shows a text in title of a
question mark icon.
In submit button, replaces 'Go' with a seach icon and add title
'Search'.
Test plan :
1)
1.1) Set system preferences :
OpacAddMastheadLibraryPulldown to 'Add'
SearchMyLibraryFirst to 'Don't limit'
1.2) Go to OPAC main page
1.3) You don't see 'Search' anymore
1.4) You see in submit button an icon
1.5) Move mouse over submit button to see tooltip text 'Search'
2)
2.1) Set system preferences :
OpacAddMastheadLibraryPulldown to 'Don't add'
SearchMyLibraryFirst to 'Limit'
2.2) Go to OPAC main page
2.3) Log in
2.4) You don't see text 'Search (in <library name>) only'
2.5) You see a question mark icon
2.6) Move mouse over submit button to see tooltip text 'Search (in <library name>) only'
Signed-off-by: Samu Heiskanen <samu.heiskanen@hypernova.fi> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Alex Buckley [Mon, 28 Mar 2022 22:07:07 +0000 (22:07 +0000)]
Bug 26346: (follow-up) Fixing for QA tool
Adding is_boolean to virtualshelves.public and
virtualshelves.allow_change_from_staff in Virtualshelve.pm DBIC schema file.
Fixing typo in Virtualshelves.t
Sponsored-by: Catalyst IT, New Zealand Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Alex Buckley [Wed, 14 Apr 2021 02:06:48 +0000 (14:06 +1200)]
Bug 26346: Add option to make public lists editable by all staff
If a staff member has access to the staff client (either because
'catalogue' permission is enabled or they're a superlibrarian
then that user can add items (from OPAC or staff client) to a list
marked 'Staff only'
Test plan:
1. In the staff client go to: Lists > 'New list'. Notice under 'Allow changes to contents
from' there are three options: Nobody, Owner only, Anyone seeing this
list
2. Apply first 3 patches and run updatedatabase.pl
cd installer/data/mysql
sudo koha-shell <instance>
./updatedatabase.pl
3. Restart memcached and plack
4. Create 4 patron accounts:
- User A : Superlibrarian permissions
- User B : 'Staff access, allows viewing of catalogue in staff interface
(catalogue)'
- User C : No permissions
- User D : 'Staff access, allows viewing of catalogue in staff
interface' and 'Lists' > Edit public lists (edit_public_lists)' sub-permission
5. Login to staff client as User A.
Create a public list and select the new 'Staff only' option under 'Allow changes to contents from'
6. Log into the staff client as User B.
Confirm you can add items to the list from the following staff client pages:
- Individual list page using the 'Add items' button
- Staff client search result page
- Staff client biblio detail page
7. Confirm you can remove items from the list
8. Confirm you can perform an OPAC search when not logged in
9. Log into the OPAC as User B. Confirm you can add items to the list
from the following OPAC pages:
- OPAC search result page
- OPAC biblio detail page
10. Log into the OPAC as User C. Do an OPAC search and confirm you
can view the list, but not add items to it
11. Login to the staff client as User B. Create a new list with the
following settings:
- 'Category'='Private',
- 'Allow changes to contents from'='Staff only'
Notice a red hint message is displayed.
Change 'Category'='Public' and notice the hint is removed
12. Log into the OPAC as User C. Notice the 'Staff only' option is not
available when creating a list
13. Log into the OPAC as User B. Repeat step 11. Confirm the same
outcome
14. Log into the staff client as User A. Create a list with the
following settings:
- Public = 'Public'
- Allow changes to contents from = 'owner only'
15. Log into the staff client as User D. Edit the list from step 14
confirm you can edit the list to have 'Allow changes to contents from' =
'Staff only'
16. Run Patron.t and Virtualshelves.t unit tests:
sudo koha-shell <instance>
prove t/db_dependent/Koha/Patron.t
prove t/db_dependent/Virtualshelves.t
Sponsored-by: Horowhenua District Council, New Zealand Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Alex Buckley [Fri, 2 Jul 2021 06:51:37 +0000 (06:51 +0000)]
Bug 26346: Updated schema file
Sponsored-By: Catalyst IT Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Alex Buckley [Fri, 2 Jul 2021 06:46:12 +0000 (06:46 +0000)]
Bug 26346: Database changes
- Adds allow_change_from_staff to virtualshelves table
- Add edit_public_lists sub-permission
Sponsored-By: Catalyst IT Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 14 Feb 2022 19:18:15 +0000 (19:18 +0000)]
Bug 17018: Split AdvancedSearchTypes for staff and OPAC
This patch adds a new system preference, OpacAdvancedSearchTypes, as an
OPAC-specific version of the AdvancedSearchTypes preference. Values from
AdvancedSearchTypes are copied to OpacAdvancedSearchTypes so that
behavior is consistent.
The patch also alters the output of the "Most popular" page so that:
1. The page heading is correct ("Most popular titles" instead of "Top
issues").
2. The table show both item type and collection whether or not the user
has submitted query with one of those fields as a filter.
To test, apply the patch and run the database update process.
- Go to Administration -> System preferences.
- Search for AdvancedSearchTypes. You should get two results, one for
the OPAC preference and one for the staff interface.
- Check that the OpacAdvancedSearchTypes settings match the
AdvancedSearchTypes settings.
- View the advanced search pages in the staff interface and OPAC to
confirm that the tabs look correct.
- Change the OpacAdvancedSearchTypes and AdvancedSearchTypes settings to
be different and confirm that each is applied separately to each
interface.
- Enable the OpacTopissue system preference.
- View the "Most popular" page in the OPAC.
- The page heading should be correct.
- The OpacAdvancedSearchTypes settings should be reflected in the
"Refine your search" sidebar: If "Collection" is checked, a filter
for collection should appear. If "Item types" is checked, a filter
for item types should appear.
- The output of your search should include collection and item type
regardless of what filters you've submitted.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marion Durand [Wed, 29 Sep 2021 08:04:23 +0000 (10:04 +0200)]
Bug 22347: Translatability of ILSDI GetAvailability
Some discovery tools can't translate ISL-DI results, it would be useful
if we can get ISL-DI output already translate.
This patch add an optional parameter language to GetAvailability, and
make GetAvailability results translatable.
If no parameter is given the output language is the language of the
cookies is present or the first language in the opac language list.
Test plan:
1. Enable the ILS-DI system preference
2. Locate a record
3. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice.)
4. Apply the patch
5. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio&language=[LANGUAGE]
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item&language=[LANGUAGE]
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice, [LANGUAGE] is a language code ex: 'en' or 'fr-FR')
6. The results should now be in the requested langugage
Shi Yao Wang [Wed, 23 Mar 2022 19:31:40 +0000 (15:31 -0400)]
Bug 27035: Shows the number of results in a facets after facet selection
System preferences:
displayFacetCount - Show;
1. Let's search
2. Near to each of the facets, we see the number of results (n)
3. Click on any of the facets and filter the result
4. Opposite the selected facets, the number of results is not displayed
Ex.
Marriage Fiction [x]
Apply the patch
1. Let's search
2. Near to each of the facets, we see the number of results (n)
3. Click on any of the facets and filter the result
4. Now, opposite the selected facets, the number of results is displayed
Ex.
Marriage Fiction (2) [x]
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
projects / koha.git / log