Alex Buckley [Tue, 9 Aug 2022 07:26:07 +0000 (07:26 +0000)]
Bug 31302: Fix spelling in sample_notices.yml
Test plan:
1. Apply patch
2. Confirm 'URL(s)', rather than urls(s), is in the line:
You can download the scanned materials via the following URL(s)
Sponsored-by: Catalyst IT, New Zealand Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b3d8941c34887b34c69edac8f33b7de179d96267)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Mon, 1 Aug 2022 14:47:04 +0000 (10:47 -0400)]
Bug 31276: Report results are limited to 999,999 no matter the actual number of results
In Koha, any report that uses C4::Reports::Guided will be limited to 999,999 rows. This is causing problems for larger libraries where some reports may have over a million results.
Test Plan:
1) Create a report "SELECT * FROM borrowers" and run it, note the number
of results
2) Apply this patch
3) Add the line `<report_results_limit>3</report_results_limit>`
within the <config> block of your koha-conf.xml
4) Restart all the things!
5) Run the report, download the results as a CSV
6) Note your CSV only has 4 lines, the header and 3 patrons
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5e29433bdc3a5ccd582ece6e2338c6e38e97c5d9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Magnus Enger [Tue, 9 Aug 2022 06:49:54 +0000 (06:49 +0000)]
Bug 31325: Fix koha-preferences get
To reproduce:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This will output something like "HASH(0x55dd4d432840)".
To test:
Apply this patch and run the command again:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This should output something like "MARC21".
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3f1fe4f178df3423bc95f9a288aaefdda6a6e8c0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Sun, 7 Aug 2022 16:14:37 +0000 (16:14 +0000)]
Bug 31281: Use correct reply-to email when sending overdue mails
Overdue emails are either sent from the issuing or the home
library of an item. We never use the patron's home library,
so the reply-to address must explicitly be set in EnqueueLetter.
To test:
- Set up 2 branches (A and B) with different email addresses.
- Set up an SMTP server for each to use
- Set up an overdue notice trigger for the patron category you'll use
First letter: 1 day delay, any notice
- Check out an item with home branch B to a patron from A
- Run the the script with:
overdue_notices.pl -t --frombranch item-homebranch
overdue_notices.pl -t --frombranch item-issuebranch
- Confirm for each setting that the correct email headers have been
used. You can see the reply-to address and to-address in the
message queue:
SELECT * FROM message_queue;
Signed-off-by: Nason Bimbe <nason.bimbe@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 18b2389de49b5c403f7bd68ef315b044a201eff5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Thu, 11 Aug 2022 22:56:49 +0000 (22:56 +0000)]
Bug 31346: Fix broken Syndetics links on OPAC detail page
To test:
-Have some Syndetics credentials
-Turn on SyndeticsCoverImages
-Look at some and you'll notice that Syndetics cover images dont always load
-If you view the page source you'll see why. The links are built like this:
https://secure.syndetics.com/index.aspx?isbn=/LC.GIF&amp;client=bedf&type=xw10&upc=843501038123&oclc=1311289389
-Apply patch
-Cover images should load properly.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 10ced3c49485aa5cdfc0cd06cfff30ddb7f9afe7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31245: Do not try to report results if task not started
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Andrew <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 12bc623ae7bcbd03fd4c8505bf1c55010bb3d0f7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 27 Jul 2022 08:35:08 +0000 (10:35 +0200)]
Bug 31245: Do not call report for job detail view if job not started
We should not generate the report if the job hasn't started yet
Test plan:
Stop the koha-worker processes, modify a new item using the batch mod
tool, then see the detail page of the job
Without this patch an error is generated:
Can't use an undefined value as an ARRAY reference at /kohadevbox/koha/Koha/BackgroundJob/BatchUpdateItem.pm line 175
Signed-off-by: Andrew <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 931f4bd79776215b8cb1e656d58abf80b7aad8db)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Andreas Roussos [Mon, 8 Nov 2021 07:19:58 +0000 (08:19 +0100)]
Bug 29434: add UNIMARC relationship codes for authorities
When using the authority finder plugin (authorities/auth_finder.pl),
you can pick an entry from the 'Special relationship:' dropdown menu
in order to set the relationship between authorities.
However, in UNIMARC instances the relationship codes listed are those
for MARC21. The correct codes for UNIMARC are listed in pages 93-94
of the IFLA UNIMARC Manual for Authorities.
Test plan:
1) In a UNIMARC instance, launch authorities/auth_finder.pl in the
Staff client, by clicking on the 'Tag editor' button. Notice how
the 'Special relationship:' dropdown menu lists the relationship
codes for MARC21 instead of UNIMARC.
2) Apply this patch.
3) Launch the authority finder again; this time the correct values
should be listed in the 'Special relationship:' dropdown menu.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a5dfa2d4901575c93d900f300fe5b5b2d7f178d4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31155: Document --since option in help of borrowers-force-messaging-defaults.pl
This patch adds a section about the --since option in the help section
of borrowers-force-messaging-defaults.pl
To test:
0) Apply patch
1) run the script with the --help option, e.g.
./misc/maintenance/borrowers-force-messaging-defaults.pl --help
--> There should be an explanation of the --since option with examples
for specific and relative dates
2) Optionally, run the script with different options
--> The behaviour shouldn't have changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 42b316912097fc11d55d3f8bacc4ade2107b4c7e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31292: Untranslatable string in sample_notices.yaml
This patch removes a regex that discard lines in multiline YAML values
On close inspection, there is no need for it.
To test:
1) go to misc translator, update some language
./translate update fr-CA
2) check missing string
egrep "You may pick up your article" po/fr-CA-installer.po
from sample_notices.yaml
3) apply the patch, repeat 1)
4) repeat 2), verify the string is present in the translation file
5) translate the new string, install the language,
verify string is present in the translated file
./translate install fr-CA
check fr-CA/mandatory/sample_notices.yml
There are three new strings
msgid "%sDear %s %s,%s"
msgid "%s%s%sTitle: %s"
msgid "%sYou may pick up your article at %s.%sYou can download the scanned materials via the following url(s): %s.%s"
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 99790c6c38af93698069f5f493b299a715eabd68)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31289: Hide Article requests column in circulation rules when ArticleRequests syspref is disabled
This patch hides the Article requests column in the large circulation
rules table when the ArticleRequests system preference is disabled.
To test:
0) Apply patch
1) With ArticleRequests disabled, go to Administration > Circulation and fines
rules
2) Scroll right in the first table
--> There isn't any mention of article requests in the table
3) Scroll down to see the other tables in the page
--> There are no other article requests tables
4) Enable ArticleRequests in Administration > System preferences
5) Go back to the Circulation and fines rules and refresh the page
6) Scroll right in the first table
--> There should be an article requests yes/no column
7) Scroll down to see the other tables in the page
--> There are other article requests tables, Default open article requests
limit and Default article request fees
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4b875fa936f1c971e734e71ec7727d780ba9a9af)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Sat, 30 Jul 2022 21:35:50 +0000 (23:35 +0200)]
Bug 31272: Use TT plugins for pickup library and due date in opac-reserve.pl
Before this patch the date formatting for the due date was done
in the .pl instead of the template and the branchcode would show
instead of the library's name in the list of items when placing
an item level hold in the OPAC.
To test:
* Find or create a record with mulitple items
* Check out one of the items
* Place a record level hold
* Return an item to set to waiting
* Place an item level hold
* Go to the OPAC and start placing an item level hold
* Verify the messages in the item table show the branchcode
* Apply patch
* Only visible change should be the library name replacing the branchcode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2353893c1acc45c99f5afbe0bde5dcd049d88660)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31249: Use cronlogaction on update_patrons_category.pl
This patch does what the title says.
To test:
1. Run the script
2. Check the action logs
=> FAIL: Boo, no record of the running cronjob
3. Apply this patch
4. Repeat 1-2
=> SUCCESS: Yay!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Liz Rea <liz@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e4d2ef0f4691058cdb9fdff34a5a555a755f75a2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 13 Jul 2022 06:01:48 +0000 (08:01 +0200)]
Bug 30992: Improve translatability for 'for'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 92f5e02a8c2ee7efaa9478015a860a5f62ee05aa)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 13 Jul 2022 06:01:34 +0000 (08:01 +0200)]
Bug 30992: Improve translatability for Waiting at|On hold
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit eedec9e929c641c9dcdb5c002f812ecf034433d4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 22 Jun 2022 14:55:03 +0000 (14:55 +0000)]
Bug 30879: Add option to syspref and update display
To test:
1 - Update ComponentSortField system preference and verify biblionumber is an option
2 - Repeat test plan from 30327 and confirm sorting with biblionumber works
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 505e12970d81fe30436a6a86189c17c9c242a729)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 22 Jun 2022 14:49:05 +0000 (14:49 +0000)]
Bug 30879: Handle index/sorting for UNIMARC
Same as before, but test with UNIMARC setup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fbf1c32a6ff03b29f68f0bee6017fb15ea8b0c1b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 22 Jun 2022 14:42:17 +0000 (14:42 +0000)]
Bug 30879: Allow biblionumber as sort option in Elasticsearch
Repeat previous tests with Elasticsearch engine
You will need to reindex and reset mappings to pickup the changes form the file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c8c51867c479bc153d84f9e23cad5983bdd535cb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 22 Jun 2022 14:37:23 +0000 (14:37 +0000)]
Bug 30879: Add biblionumber as a sorting option in MARC21
This patch updates the Local-Number indexing by adding a zeropad option
to Zebra indexing and adding this to the mapping files
It also updates C4/Search.pm to allow biblionumber as an option
To test:
1 - Apply patches
2 - copy etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl to /etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
3 - Restart all, reindex zebra
4 - Browse to: http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=kw&q=a&sort_by=biblionumber_dsc&count=20
5 - Confirm records sorted correctly
6 - Browse to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=kw&q=a&sort_by=biblionumber_asc&count=20
7 - Confirm records sorted correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 230bae0b02875dc25abe8ba71f6e7217fce80b76)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31274: Make sure OPACSuggestionAutoFill is handled as a boolean everywhere
The YAML preference definition defines it as a string ('yes' or 'no' the
possible values). And the opac-suggestions.tt template has one occurence
of the variable being compared to a string.
This patch does:
- fix the template
- fixes opac.pref for 0|1
- adds an atomicupdate that takes care of moving 'yes' and 'no' to their
respective boolean values.
To test:
1. Change the syspref value to enable/disable
2. Check on the DB that the value is wrong:
$ koha-mysql kohadev
> SELECT value FROM systempreferences WHERE variable='OPACSuggestionAutoFill';
=> FAIL: It is either 'yes' or 'no' depending on what you choose.
3. Apply this patch
4. Run:
$ updatedatabase
5. Repeat 2
=> SUCCESS: Values are now 0 or 1
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1c0b7bf01fabe7dfa558b29a7549c39a6f627c18)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Mon, 1 Aug 2022 07:25:10 +0000 (07:25 +0000)]
Bug 27849: (follow-up) Add test
Compacting the code a bit too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ad0aa754ee2a3e8e438594a54b2375b994753951)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
MJ Ray [Wed, 3 Mar 2021 17:54:42 +0000 (17:54 +0000)]
Bug 27849: Koha::Token may access undefined C4::Context->userenv
The _add_default_csrf_params internal function accesses
C4::Context->userenv without checking that it has been defined. I think
not all of the potential callers of it declare that they require a
defined userenv, so we should test and provide defaults for required
values if it is not defined, to avoid some "Can't use an undefined value
as a HASH reference" HTTP 500 Internal Server Errors.
To test:
Do anything that requires a form with CSRF token, such as editing your
details. Behaviour should be unchanged. To test the failure case, you
would need some customised code that indirectly generates a CSRF token
before setting the userenv up and I am not sure there is any in released
Koha yet.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Looks good to me. Working as expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8c45fe1aaa54fd9d6ff84617df0bb94b4cfbbb12)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Michael Hafen [Fri, 13 Aug 2021 21:52:52 +0000 (15:52 -0600)]
Bug 28864: Have patron card creator use PatronsPerPage
Add pageLength to members/member.tt
Add aLengthMenu and pageLength to
patroncards/add_user_search (common/patron_search.tt).
Add aLengthMenu, pageLength, and iDisplayLength to patroncards/edit-batch
Test plan:
1. Set the PatronsPerPage system preference to any integer other than 20.
2. Go to Tools -> Patron card creator.
3. Start a new Card Batch.
4. Click the 'Add patron(s)' button to open the patron search window.
5. Do a search.
6. Add more than 20 patrons to the batch.
7. Close patron search window.
8. Click the 'Add patron(s)' button to add the selected patrons to the batch.
9. Observe that the table of patrons is has 20 as the default per page setting.
10. Apply patch.
11. Reload the batch.
12. Observe that the per page drop down includes the value of PatronsPerPage
and that value is selected by default.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5ca665f6aaf750fa507875343da0adb423ad7bd8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Fri, 29 Jul 2022 10:53:06 +0000 (06:53 -0400)]
Bug 30984: (QA follow-up) Switch from mediumtext to varchar(255)
My research indeicates that tinytext of less than 40 bytes uses
about the same storage as a varchar(255). Also, using
a TEXT field in a complex query may create a temp table.
varchar fields are also more efficient for sorting on.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b3a0d75a40cfeec8e14d7092b4cf23763363b45a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Fri, 17 Jun 2022 10:59:11 +0000 (06:59 -0400)]
Bug 30984: Action logs should log the cronjob script name that generated the given log
When something is changed by a cronjob, and that entity is logged via action logs, we can know what changed, and that it was via a cronjob, but we cannot necessarily know which cronjob made that change. The closest we can come is to find the action logs for the cronjob module which ran before the change which is by no means reliable assuming the CronLog is even enabled.
We should add a new column to action logs to store the name of the script ran for any action logs where the interface is "cron".
Test plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable all the Log/Logging sysprefs
4) Run some cronjobs that will generate action logs
5) Note the new action_logs column "script" contains the filename of the
cronjob that caused the change.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 18fd0c89cf7f288ad5ff4527484d9e989ed3e5f7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Mon, 1 Aug 2022 10:31:21 +0000 (12:31 +0200)]
Bug 30468: Restore 'set -e' and remove echos
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4a00658e349fb21a9a334f0ab880d81b8f51d2e3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Wed, 6 Apr 2022 12:38:00 +0000 (08:38 -0400)]
Bug 30468: koha-mysql does not honor Koha's timezone setting
If I run a query like "SELECT NOW()" from a koha report, I will get a different answer than if I had run it from koha-mysql.
In Koha, we set the timezone for each database connection.
However, koha-mysql does not do this, so instead we are left using the default timezone of the database.
Test Plan:
1) Set your time zone to something other than the database time zone
2) run "SELECT NOW()" using debian/scripts/koha-mysql
*not* /usr/sbin/koha-mysql
3) Note you get the database timezone's current time
4) Apply this patch
5) Repeat step 2
6) Now you get the correct time!
Signed-off-by: Michal Urban <michalurban177@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e97b099d58e73be44354d2343c0f45077871b398)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Fri, 29 Jul 2022 23:41:13 +0000 (23:41 +0000)]
Bug 31269: Define sDefaultContent for DataTables
1. Stage a MARC record for import
2. Once you have one click on 'Manage staged records'
3. You will see an alert that says "Something went wrong when loading the table."
4. If you dismiss that you should see the following error:
DataTables warning: table id=records-table - Requested unknown parameter '' for row 0, column 4. For more information about this error, please see http://datatables.net/tn/4
5. Appy patch
6. Try ssteps 1 & 2 again
7. No DataTable errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 573db0fca181cb36063462ed566adc5bac7f293d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Shi Yao Wang [Fri, 27 May 2022 14:52:08 +0000 (10:52 -0400)]
Bug 30028: Fix patron message delete confirmation to be translatable
Make the message deletion confirmation popup translatable. Test plan
uses fr-CA translations.
Test plan:
1) Switch language to french (fr-CA)
If you do not have the translations, go to
misc/translator
then do
./translate install fr-CA
After it is done, go to administration > global system preference >
l18N/L10N then select Français (fr-CA) under language preference.
Refresh then you should be able to switch languages.
2) Add a message to a patron account from your own branch (or make sure AllowAllMessageDeletion is on)
3) Click "Delete" next to the message
--> a confirmation message appears "Are you sure you want to delete this message? This cannot be undone." with options "Cancel" and "OK".
4) Apply the patch
5) Write a translation in misc/translator/po/fr-CA-messages-js.po :
msgid "Are you sure you want to delete this message? This cannot be undone."
msgstr "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible."
6) Refresh the translations by going to misc/translator and execute ./translate install fr-CA
7) Refresh and click "Delete" again
--> now the confirmation message is "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible." with options "Cancel" and "OK"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 622137294a4f1eca66ff794e1a91a75c08fe30c8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is because the include statement for catalogue-search-box.inc is in the wrong line in circ-search.inc.
To test:
1) Go to an affected page (circulation-home was the first one I noticed)
2) Try the keyboard shortcuts and notice they are incorrect
3) Apply patch and refresh the page
4) Notice that the keys work properly
Signed-off-by: Andrew <andrewfh@dubcolib.org> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 94191e5bfe681dca021bb133c9593bc5bc7e2193)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
first two are from sample notices, third from sample creator data
3) apply the patch, repeat 1)
4) repeat 2), verify the strings are present in the translation file
5) translate some of the new strings, install the language,
verify strings are present in the translated files
./translate install fr-CA
check fr-CA/optional/sample_creator_data.yml and
fr-CA/mandatory/sample_notices.yml
There are some 60+ new strings.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 160d96e176331f8ac8eef4942bcc0af1868017c5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Thu, 28 Jul 2022 18:18:15 +0000 (18:18 +0000)]
Bug 31251: Use jQuery val() to clear_entry
1. Add some patron attributes that are textarea and some that have an AV category so they are select dropdowns
2. Go to the patron form and add some values to the patron attributes
3. Use the "Clear" button to try and clear the values, doesnt work.
4. Apply patch
5. Try clearing values from patron attributes that are both select dropdowns and textarea. The "Clear" button should work.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a3198f647496d87e19036432f1be9f87dac4614d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31238: Fix typo in marc_subfields_structure.pl
After bug 29001 one is unable to save authorised value to frameworks
subfields. This is caused by minor typo in marc_subfields_structure.pl.
To test:
1. Edit e.g. default frameworks subfield 952$8
2. Add or change fields authorised value
3. Save your changes
=> note that on subfield listing there is no mention that 952$8 is linked to any authorised value
=> if you edit 952$8 authorised value input is empty
4. Apply this patch.
5. Repeat steps 1.-3.
=> authorised value should now be saved
Sponsored-by: Koha-Suomi Oy Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c39e47cbf3af9b7fcedbfd3a3e0efcffb74efb10)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Fri, 29 Jul 2022 12:12:53 +0000 (08:12 -0400)]
Bug 29012: (QA follow-up) Use q{} instead of '' in smart-rules.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6f8e77b4e899d6f71fb8987975ba916a65dc8229)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kevin Carnes [Fri, 3 Dec 2021 09:49:59 +0000 (09:49 +0000)]
Bug 29012: Add default values for blank circulation rules that weren't saved to the database
There are 5 fields that are not set if no value is provided when saving/editing a rule in Administration->Circulation and fines rules
- issuelength
- hardduedate
- unseenrenewalsallowed
- rentaldiscount
- decreaseloanholds
This is problematic because it gives the impression these rules are set as blank, but in reality they don't exist and the rule will fal back to the higher level
To test:
1 - Set a rule for
Patron category: Teacher
Itemtype: All
Hard due date: (Today)
Lona period: 10
2 - Set a rule for
Patron category: Teacher
Itemtype: Books
Hard due date: (leave blank)
Loan period: 10
3 - Expected behaviour is Book item will checkout to teacher for 10 days, all other types will be due yesterday at 25:59:00
4 - Checkout an non-book item type to teacher
5 - Hard due date applies
6 - Checkout a 'book' item type to teacher
7 - Hard due date applies - FAIL
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cf397ac3bcbc93a508954c836d1cb90a84fb2ac6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 27 Jul 2022 15:47:18 +0000 (17:47 +0200)]
Bug 31247: Fix OPAC authentication when 2FA is enabled
Silly mistake from bug 28786, the $type should be compared to "opac"
instead of "OPAC", erk!
Test plan:
Turn 2FA on
Set it up for an user
Login at the OPAC
=> Without this patch you keep being redirected to the auth form screen
=> With this patch applied you are able to successfully login
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e7bb0d2a5ed92a1c9fedd5611e5569f11bd47723)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 27 Jul 2022 15:52:34 +0000 (17:52 +0200)]
Bug 31247: Add tests
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e9891b84fefd74059caf81730b1acd26f7cc4569)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Mon, 25 Jul 2022 07:23:25 +0000 (09:23 +0200)]
Bug 31219: Prevent JS injection in patron extended attributes
We are sanitizing other attributes but "extended patron attributes".
Test plan:
Make a patron attribute editable at the OPAC
Edit an existing patron, or register a new one
Use a script tag in the new value ("<script>alert("booh!")</script>" for
instance)
With this patch the value is remove if containing an HTML tag that is
not br b i em big small strong (see C4::Scrubber)
Signed-off-by: Mark Hofstetter <koha@trust-box.at> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31455: (QA follow-up) Make table creation O(N)
We can insert the indices before the main loop to a hash,
this way we don't have to look up during each loop iteration
the index from an array which in the worst case might take O(N)
thus making the total time complexity O(N^2).
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 223d9d3a99903cff3d8a3078e6921da79099375c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Thu, 1 Sep 2022 16:55:14 +0000 (16:55 +0000)]
Bug 31455: Make batchMod sort by order scanned
To test:
1. In batch item deletion and batch item modification add some
barcodes.
2. Notice they are being sorted by item number, not in the order
scanned.
3. Appply patch and restart services.
4. Try scanning items again in both batch item deletion and batch item
modification.
5. The found barcodes should now sort by order scanned.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5c2b2ac09a0cabbab9333bc0cab90cf1880de17f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 7 Jun 2022 09:27:04 +0000 (11:27 +0200)]
Bug 30909: Retain permanent_location if mapped
If items.permanent_location is mapped to a MARC subfields we must retain
the value, not using items.location
Test plan:
1 - Map permanent_location to a marc field
2 - Expose that field in the item editor
3 - Change the location of the item and retain the permanent location on saving
4 - note that permanent location has not changed
Test the different other situation, when adding and editing: Empty the field, change only location, change only permanent_location, etc.
Signed-off-by: andrew <andrewfh@dubcolib.org> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e2668a685702a0cd9adf3deeafcc9e4433199e0f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes the code skip calculating the plugin-related task
codes => class mapping if plugins are entirely disbaled.
To test:
1. Apply the regression tests
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Plugins/BackgroundJob.t
=> FAIL: Tests explode with: Can't call method "GetPlugins" on an
undefined value at... Koha/BackgroundJob.pm line 424.
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7867106d430dd9ab3f673185945467931a10082e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 28896d9c302ad41fce463fd8d80ea02283a7d55b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Johanna Raisa [Tue, 26 Jul 2022 09:01:56 +0000 (12:01 +0300)]
Bug 23202: Fix screen freeze when ordereing several items
This patch fixes adding multiple items on order acquisitions
The error is: Uncaught TypeError: $(...).parent(...).attr(...) is undefined
Test plan:
1) Set dateaccessioned.pl plugin to ACQ framework's 952$d field.
2) Create basket to a vendor and add order from a new empty record.
3) Add date acquired value from calendar.
4) Add multiple items and see that the view freezes.
5) Apply the patch
6) Reload the page and repeat the steps 3 and 4.
7) See that the items are added.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD Amended patch: adjust commit title Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d2d78e2581419dd3d8101fd9aecf358c71213733)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 26 Jul 2022 12:55:02 +0000 (14:55 +0200)]
Bug 31244: Fix 500 if logout and not logged in
Can't use an undefined value as a HASH reference at /kohadevbox/koha/C4/Auth.pm line 985
C4::Auth::checkauth('CGI=HASH(0x5603b7dc4300)', 0, 'HASH(0x5603b2633238)', 'intranet', undef, 'intranet-main.tt') called at /kohadevbox/koha/C4/Auth.pm line 186
C4::Auth::get_template_and_user('HASH(0x5603b7b83d08)') called at /kohadevbox/koha/mainpage.pl line 40
Test plan:
Open a private window
Hit /cgi-bin/koha/mainpage.pl?logout.x=1
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1ae5454b01f2a5cfac105b056bc2a8d72ac444a8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31246: <span> displayed in 'Additional fields' section
This patch avoids escaping HMTL data in the additional fields section.
To test:
1. Open the additional fields section
http://kohadev-intra.mydnsname.org:8081/cgi-bin/koha/admin/additional-fields.pl
=> FAIL: there are some nasty <span> </span> texts in there
2. Apply this patch
3. Reload
=> SUCCESS: Things display nicely again!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a7272f988679904d3f018550a73719fc102b3425)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Thu, 7 Jul 2022 19:14:59 +0000 (15:14 -0400)]
Bug 31120: Items will renew for zero ( 0 ) days if renewalperiod is blank/empty value
If the rule renewalperiod is the blank empty string instead of being null/undefined or non-existant, Koha will interpret the renewal period as being zero days instead of falling back to the issuelength rule.
It makes sense to me that a literal 0 here should make it renew for zero days even though that is nonsensical.
Test Plan:
1) Delete all your rules
2) Create an all/all/all rules with an empty string for renewal base
period
3) Note that renewing an item does nothing
4) Apply this patch
5) Restart all the things!
6) Renew again
7) Note the renewal uses the issuelength rule as intended
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9b010d99dfcb1a77a6ebd679aabafd819c6e67cf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Thu, 14 Jul 2022 10:38:57 +0000 (10:38 +0000)]
Bug 31120: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 511ae8298e033ddf2a12799c968d25bd716d62af)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 21982: Circulation statistics wizard does not count deleted items
By default statistic assistant filter is set on the
existing items and doesn't mind about deleted items.
The patch corrects this. Items belong to the same library.
Test plan:
1)Make sure to have at least 1 or more item(s) in deleteditems database table
2)Home > Reports > Circulation statistics
3)Fill up 'Issuing library', 'Home library' and 'Holding library'
4)Submit
5)Notice that only statistics for active items are shown
6)Apply patch and repeat from 2) to 5)
7)Now active items and deleted items are shown
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 610f287db9581bfa6d606468810792d25c6dc47b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lari Taskula [Wed, 1 Jun 2022 15:06:52 +0000 (15:06 +0000)]
Bug 30878: Avoid resetting waiting reserves tab
When canceling holds waiting over X days in "Holds awaiting pickup"
view, form submission resets the selected tab to "Holds waiting". This
tab reset may cause confusion for the user and lead to unwanted
actions. Instead, the user should be returned to the same tab that they
began with.
To test:
1. Apply patch
2. Navigate to /cgi-bin/koha/circ/waitingreserves.pl
3. Select "Holds waiting over X days" tab
4. Refresh page
5. Observe "Holds waiting over X days" is still selected
6. Have some holds waiting over X days
7. Select one of them and press "Cancel selected (1)" and confirm
8. Observe "Holds waiting over X days" is still selected after form
submission
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 30235d31884c6c24edf692a9f69170b25a645e05)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Wed, 6 Jul 2022 11:52:05 +0000 (12:52 +0100)]
Bug 15187: (QA follow-up) Add unit test
This patch adds a unit test for the newly introduced filter.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 058d411643c4b868553b97896fb065cf9870e456)
David Cook [Mon, 2 May 2022 07:34:34 +0000 (07:34 +0000)]
Bug 15187: Index 880 in Zebra the same as Elasticsearch
This patch modifies the MARC21 export to Zebra, so that 880 fields
are rewritten as their linked fields, in the same way that we
already do with Elasticsearch, so that the alternate graphic
representation of fields are indexed accordingly. (ie 880 $6245-01
Chinese titles will be indexed into the title index using the 245 rules)
Test plan:
0. Apply patch
1. Turn on ICU indexing
1b. vi /etc/koha/zebradb/etc/default.idx
1c. Replace charmap word-phrase-utf.chr with icuchain words-icu.xml
1d. Replace charmap word-phrase-utf.chr with icuchain phrases-icu.xml
1e. Restart Zebra server
1f. Re-index Zebra
2. Add record with a 880 $6 245-01 $a 教牧書信 field.
3. Search for this record using a title index with the Chinese title
4. Note that the record is correctly retrieved
(Note: This test probably works better using author or series as they
present as links on the detail page which makes the fix more obviously
useful.)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 85690a14f8685a2eb6cb88316bb4a3145c024cc2)
Martin Renvoize [Wed, 29 Jun 2022 16:26:30 +0000 (17:26 +0100)]
Bug 26689: Prepend letter codes.
This patch prepends the credit_type_code and debit_type_code with
CREDIT_ and DEBIT_ respectively when doing a lookup on the notice letter
code.
Test plan
1) As previous patches, however instead of just naming your notice to
match the credit_type_code or debit_type_code use
CREDIT_credit_type_code and DEBIT_debit_type_code respectively.
Martin Renvoize [Fri, 12 Mar 2021 16:09:22 +0000 (16:09 +0000)]
Bug 26689: Check for specific template then fallback - printinvoice
This patch adds a check for a more specific ACCOUNT_DEBIT template
(named to match the debit_type_code of the credit line) prior to
falling back to the ACCOUNT_DEBIT template.
Test plan
1/ On a patrons account page use the print option on a series of debit
lines with differing credit types (Overdue, Payout)
2/ Note that the same template 'ACCOUNT_DEBIT' is used for all types
3/ Apply the patch
4/ Run step 1 again and note all still print using ACCOUNT_DEBIT
5/ Add a new notice template under the 'circulation' module with a code
that matches one of your account debit types (OVERDUE, PAYOUT)
6/ Run step 1 again and note that where you have added a specific notice
for that debit type it has been used.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8e46612d7c5dfc8d0faff009ef9f86198bdd0f83)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Fri, 12 Mar 2021 14:38:31 +0000 (14:38 +0000)]
Bug 26689: Check for specific template then fallback - printfeercpt
This patch adds a check for a more specific ACCOUNT_CREDIT template
(named to match the credit_type_code of the credit line) prior to
falling back to the ACCOUNT_CREDIT template.
Test plan
1/ On a patrons account page use the print option on a series of credit
lines with differing credit types (Payment, Lost Item Return, Writeoff)
2/ Note that the same template 'ACCOUNT_CREDIT' is used for all types
3/ Apply the patch
4/ Run step 1 again and note all still print using ACCOUNT_CREDIT
5/ Add a new notice template under the 'circulation' module with a code
that matches one of your account credit types (PAYMENT, WRITEOFF,
LOST_FOUND)
6/ Run step 1 again and note that where you have added a specific notice
for that credit type it has been used.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 422ab472836cfcd0dd4197173de1213c06375d42)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Fri, 8 Jul 2022 14:46:04 +0000 (15:46 +0100)]
Bug 31121: Fix date formatting in cashup summary modal
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c12d037da294944cf82208b2bd72d3348b66c0cf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Wed, 20 Jul 2022 16:53:28 +0000 (16:53 +0000)]
Bug 31204: Clearly indicate edit buttons are for record modification
To test:
1. Apply patch
2. Do a search and select some records
3. On the toolbar (#selection_ops) open the Edit dropdown.
4. The labels should read 'Batch edit records' and 'Batch delete records'.
Note: To see both you must have batchmod and batchdelete permission.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7ce420ed82862e750b7a6a46c66c5cf1587f5e7d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Wed, 6 Jul 2022 10:54:35 +0000 (11:54 +0100)]
Bug 30838: (QA follow-up) Add unit tests
Two tests added, one in t/db_dependent/Circulation.t to catch the
initial setting of to_address at enqueue time and a second in
t/db_dependent/Letters.t to catch the correcting at send time.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 467b444c7e355b1ef3ecbab29f67544bfd72360b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Tue, 28 Jun 2022 11:27:17 +0000 (07:27 -0400)]
Bug 30838: (QA follow-up) Add missing semicolon
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 008e6ae9ebd45cc8161a86f293703f02d7409319)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Tue, 24 May 2022 11:57:09 +0000 (12:57 +0100)]
Bug 30838: Set to_address to smsalertnumber at send
It may be helpful to know exactly what number was used for the sms alert
that was sent. As such, we should ensure it's set at the time of
sending.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e9cdc1da651faa24a93f87569bf2b219f31552ee)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Tue, 24 May 2022 11:32:45 +0000 (12:32 +0100)]
Bug 30838: Don't fallback through phone numbers for sms
This patch removes the fallback handling for smsalartnumber as the
to_address in notices. We ignore the to_address field in the message
queue at send time for sms anyway and use smsalertnumber exclusively so
having this field populated is just confusing to the end user
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5e388ed509c58b5f7398baf6f7bb027b4dc46c1c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Tue, 12 Jul 2022 15:22:46 +0000 (16:22 +0100)]
Bug 31086: (QA follow-up) Add unit tests
This patch adds the unit tests for the change to Koha::Hold::store.
We test for and catch the exception introduced for both the create and
update cases.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f0685f0f4053da428ab13d9f3991790fb71b7e55)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Tue, 12 Jul 2022 15:21:30 +0000 (16:21 +0100)]
Bug 31086: (QA follow-up) Fix failing tests
This test was missed first time around, branchcode needed adding to all
the calls to AddReserve.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit bdddc7ee0a3a0ed2ec1c5996ab5be587c1e395df)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Tue, 12 Jul 2022 14:39:37 +0000 (15:39 +0100)]
Bug 31086: (QA follow-up) Remove DEFAULT from column
There's no need to have a default here, and in fact it doesn't make
sense.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d731943c2464592624d2b34bc91a75ea3ceae5b7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 1 Jul 2022 15:30:33 +0000 (15:30 +0000)]
Bug 31086: Update existing unit tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit bf2a9b5279151b61bb149c318505e2d5e5ca8df8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 1 Jul 2022 14:46:26 +0000 (14:46 +0000)]
Bug 31086: Prevent placing hold with no pickup location
To test:
1 - Apply patch
2 - Repeat test on previous patch
3 - You should get a warning popup when attempting to save hold
4 - Reload page
5 - Inspect the HTML and manualy set #pickup value of selected option to ""
6 - Attempt to save hold
7 - You get the popup
8 - Place a hold normally (with location) and verify it works
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e609e20c041084a5b763f0b8fe8cd304e5ca8159)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 1 Jul 2022 14:44:09 +0000 (14:44 +0000)]
Bug 31086: Throw an exception when a hold is stored with no branchcode
To test:
1 - Apply first 2 patches
2 - On staff client, find a biblio, place hold, select a patron
3 - Before creating hold, right click on 'Pickup location'
4 - Inspect the element
5 - In the console find the top <li> for pickup, and right click
6 - Select 'Delete node'
7 - Save hold
8 - You get an exception/error
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e7d886d388dc9825c6e93a158e19f7da60db145b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 1 Jul 2022 14:43:09 +0000 (14:43 +0000)]
Bug 31086: DB update
This update sets branchcode as NOT NULL
default set to 0 as borrowernumber is
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1565efe8f3e4c782e4d94a6c06cc71d2ac460d43)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30308: Fix bulkmarcimport.pl broken by OAI-PMH:AutoUpdateSets(EmbedItemData)
Test plan:
(A) Reproduce the bug:
A1 In Administration > System preferences > Web services:
- Enable OAI-PMH
- Enable OAI-PMH:AutoUpdateSets
- Enable OAI-PMH:AutoUpdateSetsEmbedItemData
A2 In Tools > Export data > Export bibliographic records, export 1 (one)
biblio record. Be sure that this biblio record has at least one item.
Don't tick "Don't export items".
A3 Delete the exported biblio record, and its items.
A4 In command line, on the server load the exported file:
./bulkmarcimport.pl -b -v -file /path/to/koha.mrc
A5 Retrieve the biblio record in Koha. Note the absence of the item(s). This is
the bug.
(B) Apply the patch
B1 Delete the record (without item) loaded at A4.
B2 In command line, on the server load the exported file:
./bulkmarcimport.pl -b -v -file /path/to/koha.mrc
B2 Retrieve the biblio record in Koha. Note the presence of the item(s).
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d5e65dd4c0352c4fb2d96f4cabfc6e6311770cd0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 12 Jul 2022 08:09:25 +0000 (10:09 +0200)]
Bug 31138: Don't ignore DataTables errors and raise them to the end-user
DataTables is not raising error to the end user, it's only displaying a generic message in the console.
This leads to lot of questions on IRC or the mailing list ("the table is empty").
We can do better and display what went wrong.
We could also imagine add a link to the wiki for the more common problems (won't be implemented here however).
Test plan:
Revert "Bug 31104: Put each link on a separate header" and search for a
patron using a very long string
You should get an alert with the reponse of the server.
In my case:
"""
Something went wrong when loading the table.
414: Request-URI Too Long
"""
You can also make the REST API returns a 500 (bad specs or simply with a
die statement).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 76b984bb6ccee55ba1ddfdb5b08c6ee2e75eaa37)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 21 Jul 2022 18:16:22 +0000 (18:16 +0000)]
Bug 31213: Auto search simple term quoted
This patch does a second search if the first had no results and was a simple single term search
We simply quote the term, rebuild the query, and rerun the search
This targets both Zebra and ES, but is more relevant for ES
To test:
0 - Have Koha running using ES
1 - Add titles your system "Ivy + Bean" "The 6:20 Man"
2 - Search for these titles without quotes - NO results under ES
3 - Search with quotes - you find them
4 - Apply patch, restart all
5 - Search again without quotes
6 - Success!
7 - Confirm search still works under Zebra
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2ce5f0532c8fea625c838725f70518421ebbb22b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Tue, 5 Apr 2022 13:40:51 +0000 (09:40 -0400)]
Bug 30458: Include librarian (manager_id) in accountline when using "Payout amount" button
When using the "Payout amount" button, accountlines.manager_id is not
populated. This is not the case with the "Issue payout" buttons.
Test Plan:
1) Create a manual credit
2) Issue a payout using the "Payout amount" button
3) Inspect the payout accountline, note it has no manager_id
4) Apply this patch, restart all the things!
5) Repeat steps 1 and 2
6) Note the new payout accountline has a manager_id!
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
JK: Fix commit title
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 0177b88eb33d398da4eb5ffb6344226930c3346b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 6 Apr 2022 13:49:58 +0000 (13:49 +0000)]
Bug 30471: Correct display of default rules
To test:
1 - Browse to 'Administration->Circulation and fines rules'
2 - Make sure you are editing 'Standard rules for all libraries'
3 - Set 'Lost item fee refund on return policy' to 'Refund lost item charge and charge new overdue fine'
4 - Swtich to edit rules for a specific library, click on the dropdown for 'Lost item fee refund on return policy' and note default says 'Use default (Refund lost item charge and restore overdue fine)'
5 - Switch default/all libraries rule to 'Refund lost item charge and restore overdue fine'
6 - On specific branch note the default option is now 'Use default (Refund lost item charge and charge new overdue fine)'
7 - Apply patch and repeat, note the default descriptions now display correctly
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 417d8df61b4d00b6b904dd374835e99cfb9be4a2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 0df59817bf52e26b44348848ea8d299d814482c2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 19 Jul 2022 15:00:29 +0000 (17:00 +0200)]
Bug 29001: Fix framework edition when subfields are reordered
There is a flaw when subfields are ordered, the inputs are not retrieved
correctly.
We should not rely on the order but use an id instead.
Test plan:
Create, edit subfields
Modify values from the different subfields
Confirm that values are correctly saved
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 16a919d9191dd4221f7f370cfcd36555428ea9fa)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Wed, 20 Jul 2022 16:32:58 +0000 (12:32 -0400)]
Bug 31202: Don't remove optional SIP fields with a value of "0"
If the value of a SIP field is "0", that evaluates to false, so any calls to maybe_add with a value of "0" will not get added to the SIP response message.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: Michal Urban <michalurban177@gmail.com>
JK: Adjust commit title
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8b957a69d4449bedd0f593cf946e5fde0e8d7a69)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 20 Jul 2022 15:44:05 +0000 (17:44 +0200)]
Bug 31201: Prevent Pseudonymization.t to fail
It's failing if selenium/patrons_search.t failed before, they are using
the same code and the selenium tests didn't clean correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ed83d7744502d767d9806afb8516ec5ecb967fa5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30658: (bug 29496 follow-up) CheckMandatorySubfields don't work properly with select field in serials-edit.tt for Supplemental issue
CheckMandatorySubfields use the class "input_marceditor" but in file
serials-edit.tt this class is not set for select input in Supplemental
issue form. In consequence if a select field is set as mandatory, it is
detected as missing even if it is filed and so you can't submit the form
and receive the new supplemantal issue.
Test plan:
1- Create (or find) a subscription for a biblio record and select the
option "Create an item record when receiving this serial"
2- Be sure to have at least one mandatory subfield that is filed with a
select input in the framework used by the biblio record. (ex: 952$a,
952$b or 952$c).
3- From the subscription-detail page click on "Receive"
4- In the lower part--Supplemental issue--fill the suppelemant details,
change the status to "Arrived" and fill the item form that appears.
5- Click on "Save"
6- Check that an error box appear with the message " Form not submitted
because of the following problem(s) 1 mandatory fields empty
(highlighted)" (the number can be different according to the number of
concerned subfields)
7- Apply the patch
8- Repeat step 3 to 5
9- Check that no error appear and that your item has been created
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4f6164d1940f4d666d2efb0e3e8d76bea3108125)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31186: Fix the hidingrules test for result numbering
We should not test the $hidingrules variable but the number
of keys it contains.
Test plan:
Clear OpacHiddenItems.
Check with and without this patch search result numbering on
the OPAC.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d7647052f20104b70ba6b02d1535874fb9ab3b61)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Sat, 16 Jul 2022 11:23:54 +0000 (11:23 +0000)]
Bug 27045: (follow-up) Fix delimiter in header rows
The header rows still showed \t because the newly defined
variable wasn't used there.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2eea061ca30e4810b07ca2920bfe1e55762fab02)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 20 Nov 2020 14:33:14 +0000 (15:33 +0100)]
Bug 27045: Fix other exports using CSV profiles
This patch corrects the export of the 2 other reports
using CSV profiles:
* Late issues (serials)
* Basket (acquisitions)
To test:
1) Late issues
* Update the late issues sample report to use tab as separator
* Create a subscription
* Go to serial collection and 'generate next' to get some late issues
* Go to Claims
* Export the late issues and verify format is correct
* Verify exported file has tabs
2) Basket summary
* Create an order with several order lines
* Create an SQL type CSV profile for basket export using tab as separator
Example: aqorders.quantity|aqordres.listprice|Title=biblio.title
* Export the basket using your configured CSV profile
* Verify exported file has tabs
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7cd84171ab57a35138fa5c585d2ed6de442e453c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
projects / koha.git / log