David Cook [Mon, 20 Jan 2014 02:52:38 +0000 (13:52 +1100)]
Bug 11244: (follow-up) Fix $dateonly flag
At the moment, $dateonly is set to true when $1 is defined. However,
since the regex capture group only includes the time, this flag will
only be set when there is a value that includes a time.
In effect, this means that timestamps are reduced to dates only,
while dates have 00-00-0000 added to them.
This patch keeps the logic but reverses the values, so that $dateonly
will default to true unless $1 is defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 28 Nov 2013 14:01:55 +0000 (15:01 +0100)]
Bug 11244: notices ignoring the dateformat preference
Overdue notices are using the MySQL date format and not the dateformat
in the system preferences.
Test Plan:
1) Enable checkout notices for a patron, make sure the date due is in
the notice.
2) Check out an item to that patron, note the date is in the mysql
datetime format
3) Apply this patch
4) Check out another item to the patron, not the date is now in the
preferred date format.
Signed-off-by: David Cook <dcook@prosentient.com.au>
I love this patch! It is the best solution to this problem that I've
seen. I think it is set up to perfectly handle dates in the notices.
Unfortunately, the $dateonly flag is backwards, so the time is stripped
from timestamps and 00:00:00 is added to dates without times.
I'm adding a follow-up to reverse the setting of this flag.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12782: (followup) skip tests that fail because of provider's error
It seems that XISBN is failing sometimes, if you run the tests a couple
of times in a row. An error 500 is raised by lwp.
This problem should be trapped and related tests skipped. Because too much
noise could make people pay no attention to this tests failing.
To reproduce:
- Run the tests several consecutive times:
$ prove -v t/db_dependent/XISBN.t
=> FAIL: XISBN test will fail eventually, printing a networking-related warning.
- Apply the patch
- Repeat the test
=> SUCCESS: when XISBN the networking/connection refused problem arises, the test
is skipped, and it still passes.
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12782: t/db_dependent/XISBN.t fails in DOM setup
To test:
- Have a DOM setup
- Run
$ prove -v t/db_dependent/XISBN.t
=> FAIL: Can't call method "field" on an undefined value at .... C4/Search.pm ...
- Apply the patch
- Run
$ prove -v t/db_dependent/XISBN.t
=> SUCCESS: Tests pass.
- Sign off
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 28 Jul 2014 22:21:17 +0000 (00:21 +0200)]
Bug 1561 - z39.50 results do not show search terms
This patch adds a line with search terms results window of z39.50 search.
To test:
- In staff client, go to cataloging.
- Click 'New from z39.50'
- Do a search
- Your search terms should display at the top of the results page.
- Repeat search with several combinations of search terms (with and without results).
- Check the output for correct html.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, fixed one tab.
Something similar would be nice for the results in the Z39.50 search
in acq as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Robin Sheat [Thu, 10 Apr 2014 05:11:50 +0000 (17:11 +1200)]
Bug 11842 - fix framework caching with memcache/plack
This changes the existing framework caching, which was using memoisation
if memcached was available, and memory in all cases, to use the
Koha::Cache system. This uses memcache if possible, and in-memory
otherwise. However it also clears the cache when the framework updates,
making sure that the changed version will be picked up.
Note that the in-memory cache clears itself after 10 seconds, so that if
memcached isn't available, this is the longest that old versions will
hang around.
Test plan:
* work through
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11842#c0
and make sure that the erronious result doesn't occur.
Note:
* The patch on bug 12041 is required for this to work.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 16 Jul 2014 20:06:40 +0000 (16:06 -0400)]
Bug 12589 - Manage label batch view should show item type description instead of code
When viewing the list of items in an existing label batch the item type
code is shown. This patch modifies the template to show the item type
description instead.
To test, go to Tools -> Labels -> Manage batches. If necessary, create a
batch with multiple items of different item types. Edit the batch and
confirm that the table of items shows item type description instead of
code.
Signed-off-by: Robert Higgins <robert.higgins@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12694: Remove CGI::scrolling_list from unimarc_field_4XX.pl
There are two instances on this file, but they are not used.
I suppose is old code that was left dangling.
Both scrolling_list, CGIPublisher and CGIitemtype, are not
used on unimarc_field_4XX.tt nor any other file.
Just removed from file two useless db queries.
To test:
1. Apply the patch
2. If you have unimarc config, just go to one of the
fields that use this plugin.
If you don't, can edit you framework and change the plugin
for a tag, e.g. 007. Then save fw, search and edit a record,
clic to open plugin on 007 tag, check that works but don't
save the original record, finally revert your changes.
There must be no functional changes, is unused code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified plugin still seems to work:
- item type pull down shows up correctly
- search works and choosing a record will fill subfields
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12704: Remove CGI::scrolling_list from unimarc_field_225a.pl
This patch removes the only instance in this file
To test:
1. Apply the patch
2. If you have UNIMARC, search for a record, edit it,
and go to tag 225
If you don't, edit your framework and connect this
pluging to some tag/subtag
3. Clic on the plugin link. If you don't have any record
that correspond to the search, can remove the commented
line to have something to play
4. The collection pulldown was replaced, check that works,
select a value and press Ok
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, tested according to test plan.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 15:18:59 +0000 (10:18 -0500)]
Bug 12432 - Saved reports tabs not working
In release 3.14.05.000 the tabs on the Saved Reports page worked
correctly but after upgrading to 3.16.00.000 the tabs stop working.
Visually the tabs change but the table of reports is not filtered. There
are no errors reported in the browser console.
Test Plan:
1) Attempt to filter saved reports by group tabs
2) Note no matter the tab you select, all reports appear
3) Apply this patch
4) Repeat step 1
5) Note the reports are now filtered correctly
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described with the
second patch applied as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11614: Untranslatable label_element_title in label management
This patch makes those strings translatable.
Title now depends on element, all on TT file,
removed from pl file
To test:
1. Apply the patch
2. Go to Tools > Label creator
3. Clic on Manage layouts, templates, profilesor batches,
title of currently available must show with fixed
capitalization
4. Update translation languages and check new entries
msgid "Currently available batches"
msgid "Currently available layouts"
msgid "Currently available profiles"
msgid "Currently available templates
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12695: Remove CGI::scrolling_list from marc21_linking_section.pl
Same situation as Bug 12694.
There are two instances on this file, but they are not used.
I suppose is old code that was left dangling.
Both scrolling_list, CGIPublisher and CGIitemtype, are not
used on marc21_linking_section.tt nor any other file.
Just removed from file two useless db queries.
To test:
1. Apply the patch
2. Can't remember how to trigger this plugin.
You can edit you framework and change the plugin
for a tag, e.g. 007. Then save fw, search and edit a record,
clic to open plugin on 007 tag, check that works but don't
save the original record, finally revert your changes.
There must be no functional changes, is unused code.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan successfully. The behavior of the plugin window
appears to be unchanged after applying the patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amending the test plan a bit: The plugin was added by bug 8185
- not dead code at all :)
In order to test:
- Edit one of your frameworks, make 773 atwxz9 visible.
- Link 773 $9 to the marc21-linking-section plugin
- Create a new record in cataloguing
- Search for a your host item record (parent)
- Link it
- Observe that the subfields have been filled with information
from the other record
$w = 001 from the parent
$9 = biblionumber from the parent
$t = Title
$x = ISSN
...
Still works with the patch applied.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Sat, 16 Aug 2014 08:10:31 +0000 (20:10 +1200)]
Bug 7143 Updating the about page
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Sat, 16 Aug 2014 08:02:03 +0000 (20:02 +1200)]
Bug 7143 Updating history
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
David Cook [Mon, 4 Aug 2014 03:49:56 +0000 (13:49 +1000)]
Bug 12708 - Unexpected behaviour in IE 9 and lower when using openWindow
This patch removes the whitespace from arguments to the "name" parameter
in "window.open". It also adds a trap for the "openWindow" helper
function, which will use a "null" instead of a "name" if window.open
isn't able to handle a name with whitespace (i.e. if it's IE <= 9).
_TEST PLAN_
1) Switch to an emulated or authentic Internet Explorer version E 9
or lower
2) Click "Help"
3) Note that it opens the page in the current window rather than as a popup
4) Apply the patch
5) Shift refresh your page
6) Click "Help"
7) Note that it now opens (correctly) as a pop-up
(If you want to be more thorough, you can test in other browsers as well
to make sure that it still works.)
Tested with IE 10 developer tools: IE7, IE 8, IE 9
Window pops up as expected. No regression found with IE 10 / FF31.0 Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested for regressions in Firefox and Chromium.
I checked the help and the duplicate authorities windows
still work correctly.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 30 Oct 2013 09:50:13 +0000 (10:50 +0100)]
Bug 9180: All branches should be returned if a default rule exists
The C4::Overdues::GetBranchcodesWithOverdueRules routine has a bug.
If a default rule *and* a specific rule exist, only the branchcode for
the specific rule is returned.
Test plan:
prove t/db_dependent/Overdues.t
and verify the unit tests are consistent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
1. Check no regressions on authority editor,
new/edit/save
2. Check new line on translation files, update
a language, look for 'Tag editor'
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked various features of the authority edtior:
- repeating subfields
- deleting subfields
- changing the order of subfields
- linking a subfield to an authorised value
- plugins
No regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Fri, 25 Jul 2014 10:23:58 +0000 (12:23 +0200)]
Bug 12501: Show dissertation note (MARC21 502) in XSLT results
Bug 9356 added the dissertation note from MARC21 502 to the staff
and OPAC detail pages. This patch adds it to the result list.
1) Catalog a record with 502
Examples: http://www.loc.gov/marc/bibliographic/bd502.html
2) Important: Wait until the record got indexed by Zebra or
index it manually.
3) Verify your note shows up on the detail pages in staff and OPAC
4) Verfiy note also shows up on the result pages in staff and OPAC
5) Hide the dissertation note from display:
OpacUserCSS:
.diss_note {
display:none;
}
IntranetUserCSS:
.diss_note {
display:none;
}
6) Verify CSS works and all looks like before...
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as describes, value can be hidden using css,
no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12753: Warnings in t/SIP_Sip.t could be tested
A C4::SIP warning is expected and should be tested.
To test:
- Run
$ prove -v t/SIP_Sip.t
=> FAIL: A warning is printed to STDOUT
- Apply the patch
- Run
$ prove -v t/SIP_Sip.t
=> SUCCESS: No warnings on STDOUT, a new test verifying the warning is added.
- It was an easy one, smile and sign off :-D
Sponsored-by: The Will to Procrastinate Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Sponsored-by: Sunday TV is boring Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Sponsored-by: Avoiding distance study homework Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 19 May 2014 11:01:58 +0000 (07:01 -0400)]
Bug 12287 - Hold priority for new hold incorrect if record has holds in transit
When placing a new hold, the listed priority for the hold will be
incorrect if there are any holds with items in transit ( i.e. found = T ).
Test Plan:
1) Place 3 holds on a record with at least 2 items
2) Fill one hold so it is marked as waiting
3) Fill on hold so it is marked as in transit
4) Begin placing a new hold
5) Note the expected priority would be 2, but is actually 3
6) Apply this patch
7) Reload the patch, now the expected priority shows correctly
Signed-off-by: Coralie Barsacq <c.barsacq@mairie-laciotat.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sun, 27 Jul 2014 12:02:02 +0000 (14:02 +0200)]
Bug 12658: Wording of link text and translatability inside JavaScript
This patch changes 'Select all frameworks' to 'Select all sample data' and exposes it to translation through function _().
To test:
Apply first patch.
See "Select all frameworks" on Webinstaller > Step3
Apply second patch
Text changes to "Select all sample data"
Check translation
Check for JavaScript errors
http://bugs.koha-community.org/show_bug.cgi?id=12658 Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes link text and also makes it translatable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sean Hamlin [Fri, 25 Jul 2014 01:55:48 +0000 (13:55 +1200)]
Bug 12658: Installter step 3 - select framework "select all" button, labels and misc HTML formatting issues.
To test:
1/ Visit /cgi-bin/koha/installer/install.pl?step=3&op=selectframeworks
2/ Assert you can see a link "Select all frameworks" (with JavaScript enabled)
3/ Assert when you click the "Select all frameworks" link all checkboxes are now ticked on the page
4/ Assert when you click on the text next to a checkbox, that it will toogle the corresponding checkbox (accessibility)
5/ Assert there is less unclosed HTML tags on the page (should be none on the select framework page now)
6/ Assert the installer still functions as expected for a clean install
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Link says "Select all frameworks" perhaps "Select all options" or "Select all" would be clearer, but seems to work as desired
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sun, 27 Jul 2014 18:30:47 +0000 (20:30 +0200)]
Bug 4231 - Placing holds from cart fails silently
This patch adds a more meaningfull message if multiple biblios with no
items attached are in the cart.
To test:
- Add biblios with and without items to cart
- Go to cart, select all and click 'Place hold'
Without patch, message reads:
Cannot place hold: this record has no items attached.
With patch, message reads:
Cannot place hold: one or more records without items attached.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Trivial string fix. Message is better than before.
Bug 11504: Untranslatable "Item Type" or "Collection Code" in branch transfer limits
This patch makes reported strings translatable.
To test:
1. Go to Administration > Library transfer limits
2. Depending on the value of BranchTransferLimitsType
your may see in a box:
a) For *all* Collection codes:
b) For *all* Item types:
change system preference to show both values
3. Update translation files for your preferred language
check new entry
msgid "%sCollection codes%sItem types%s: "
Not pretty but can be translated.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have to confess that I lower cased the collections and item
types as they appear in a sentence.
No other changes made and this works nicely.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12716: Allow the import patrons form have drop-downs and datepickers
To reproduce:
- Go to Tools > Import patrons
- Notice branchcode and categorycode don't have dropdown menus with
valid options.
- Notice dateofbirth, dateenrolled and dateexpiry don't have date-pickers
- Notice each input field is labeled with the column name instead of a
proper description.
To test:
- Apply the patch, go to Tools > Import patrons
- Notice branchcode and categorycode have dropdown menus with valid options,
and by default the empty value is selected.
- Notice that if you go into the dateofbirth, dateenrolled and dateexpiry
fields, a nice date picker widget appears.
- Notice each field is labeled with the field description, and that the
column name is conveniently shown at the right of the input field.
Important: test switching the ExtendedPatronAttributes syspref, and verify that
if enabled, the patron_attributes field appears, and also the checkbox selector
controlling the extended patron attributes import behaviour shows too.
Bonus points: Verify that on a different language, the descriptions get translated,
and the column names show correctly
Regards
To+
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no regressions found.
Dates are output in ISO/database format, this is ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Mon, 28 Jul 2014 21:36:01 +0000 (17:36 -0400)]
Bug 12666 - Fix poor HTML from circ/offline.tt
In koha-tmpl/intranet-tmpl/prog/en/modules/circ/offline.tt
- Cleaned up the HTML's missing </div>'s
- Corrected the autobuffer attribute to the newer preload one
- Added into empty title, since it will get replaced
TEST PLAN
---------
1) Run the circ/offline.pl page source through an HTML validator
-- should get a few warnings
2) Apply patch
3) Recheck page source (confirm your page isn't cached!)
-- should be clean
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves HTML validity, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Wed, 13 Aug 2014 16:54:30 +0000 (12:54 -0400)]
Bug 12091: HTML from auth_subfields_structure.tt doesn't pass firefox's html validator
This cleans up the HTML in auth_subfields_structure.pl and
auth_subfields_structure.tt by:
- fixing some attributes
- removing some attributes
- and using a handy-dandy validation plug-in that Owen pointed
me at the other day.
TEST PLAN
---------
1) Install HTML Validator Plugin (Html Validator 0.9.5.8 Firefox addon)
2) Log in to staff client
3) Koha administration
4) Authority types (on the right, 5 down from Catalog header)
5) Click 'MARC structure' of any auth type
6) Click 'subfields' (I believe for any Tag >= 010)
7) Click 'Edit subfields'
8) Right click and select 'View Page Source'
-- Lots of HTML validation errors
9) View the 'Authorized value:' and 'Thesaurus:' drop down lists.
-- Patch cleans up code, so lists should remain unchanged
after applying patch
10) Apply the patch
11) Refresh the page (make sure it isn't cached!)
12) Right click and select 'View Page Source'
-- It should be down to 10 errors / 11 warnings.
NOTE: I think this means there is a code problem with
actually editing authorities properly!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, much less validation errors, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CÃleans up code, also removes SQL in favor of using a method.
No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12707: Remove CGI::scrolling_list from some Reports
This patch removes similar instances on 5 files, same code.
Also removes a commented one, changed in case some plan to
resurrect the code.
This bug depends on Bug 12696.
In all cases but the commented one, what was replaced
is a pulldown with one value, 'CSV'
To test:
1. Apply patch for Bug 12696
2. Apply this patch
Check for the pulldown 'Into an application'
3. Go to Reports > Statistics wizard > Borrowers
4. Go to Reports > Statistics wizard > Circulation
5. Go to Reports > Statistics wizard > Holds
6. Go to Reports > Top lists > Most-circulated items
7. Go to Reports > Inactive > Patrons who haven't checked out
8. There is also a commented code on catalogue_stats, no fuctional
changes.
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12706: Remove CGI::scrolling_list from serial_stats.pl
This patch depends on Bug 12696
Removed one instance in this file.
Pulldown with one value, 'CSV'
To test:
1. Apply the patch for Bug 12696
2. Apply this patch
3. Go to Reports > Statistics wizard > Serial
4. Check 'Into an application' pulldown, with value 'CSV'
5. Search for regressions
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12696: Remove CGI::scrolling_list from C4/Reports.pm
This patch removes only instance in this file.
Problem is that there are many template files
involved. Most of them have other instances of
scrolling_lists but is a problem for other bugs,
they will depend on this.
What is replaced is a pulldown for delimiter choices.
In all but one case the code is the same (variable name change),
and I did a little tidy of the TT code
To test:
1. Apply the patch
In all the following cases, check delimiters pulldown (Output box, bottom right)
2. Go to Reports > Statistics wizard > Acquisitions
3. Go to Reports > Statistics wizard > Patrons
4. Go to Reports > Statistics wizard > Catalog
5. Go to Reports > Statistics wizard > Circulation
6. Go to Reports > Statistics wizard > Serials
7. Go to Reports > Statistics wizard > Holds
there is a bug here, pulldown next to this must show 'CSV' option,
but shows nothing. Will be fixed
8. Go to Reports > Other > Average loan time
9. Go to Reports > Top lists > Patron checking out the most
Here there is a 'Delimiter' label before delimiters, only case
10. Go to Reports > Top lists > Most-circulated items
11. Go to Reports > Inactive > Patrons who haven't checked out
There is and inconsistency here, name of option on reports page,
and name on this report, 'Patrons with no checkouts'
Followed test plan. Pulldowns display as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12745: Add a sanity check for QueryParser configuration on about.pl
Currently there's no way for the user to know he has a bad QueryParser configuration.
Koha would just fallback to not using it.
This patch adds a check for QueryParser configuration sanity in about.pl
To test:
- Have UseQueryParser = "Don't try"
- Go to More > About Koha > System information
- No QueryParser-related warnings
- Set UseQueryParser = "Try"
- Go to More > About Koha > System information
- On a normal setup you shouldn't have any QueryParser-related warnings
- Edit your koha-conf.xml file and change the queryparser_config entry to a
non-existent filename.
- Reload More > About Koha > System information
=> SUCCESS: a warning message tells you the filename used, and says it failed.
- Now just delete the entry in koha-conf.xml
- Reload More > About Koha > System information
=> SUCCESS: a warning message tells you don't have the queryparser_entry in
your koha-conf.xml file.
Subtest:
a - The file /etc/koha/searchengine/queryparser.yaml exists:
=> SUCCESS: a warning saying it used a fallback is shown
b - The file doesn't exist
=> SUCCESS: Missing entry warning, plus a failure message for the fallback.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With the typo in the path (non existing file), 'no warnings' is stil shown
below the warnings. The follow-up fixes that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 26 May 2014 19:50:16 +0000 (07:50 +1200)]
Bug 12529: Add a syspref to make overdue notices respect holidays
Test Plan
Set up some overdue triggers, for example 5,10,15
Set up some holidays
Create some items that are past due (one due 5 days, 10 days ago etc)
Run the overdue notices script (misc/cronjobs/overdue_notices.pl)
Notice holidays are ignored
Apply the patch,
Switch the OverdueNoticeCalendar syspref to Use calendar
Run the overdue notices again
Notice holidays are now taken into account
Sponsored-by: BSZ Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12683: (followup) use the Koha.Preference plugin and add ids
It is kosher now to use the Koha template toolkit plugin for retrieving
system preferences values. This followup does that.
It also changes the class for ids, for people considering this patch
introduces too much noise on the home screen being able to control
its visibility.
Regards
To+
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Tue, 12 Aug 2014 14:21:56 +0000 (10:21 -0400)]
Bug 12683: Follow-up, adding div tags around NoLoginInstructions
Button in pop-up displays now as expected.
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12683: Use NoLoginInstructions to customize text for OPAC user/pass information
Enable staff to setting a text for OPAC user/pass information
Modified:
C4/Auth.pm
koha-tmpl/opac-tmpl/bootstrap/en/includes/usermenu.inc -add a text to the popup login page
koha-tmpl/opac-tmpl/bootstrap/en/includes/opac-main.tt -add a text to the main login page
Testing:
I Apply the patch
0) Search NoLoginInstructions preference
1) Add/modify a text
2) Open OPAC main page
3) Validate the text added under Login button
4) Click in "Log in to your account" link
5) Validate the text added under input password (popup)
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Patch behaves as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8938: Transport cost matrix script and template contain untranslatable strings
This patch fixes the problem reported.
To test:
1) Apply the patch
2) Update translations for your preffered language, xx-YY
3) Check new entries
egrep -Rn "Cost must be expressed as a decimal number|Invalid value for" misc/translator/xx-YY*
4) Check no regression on alert, go to
Administration > Transport cost matrix
Edit some value and put a negative value & save,
alert must show up
5) On errors, part of the error string is now on TT file,
no regressions expected here
Verified that changes appear in translated language (de-CH) as appropriate. No regressions found by testing en en de-CH. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested both, entering a numeric value < 0 and non-numeric values, no regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12621: Z39.50-targets - Record type is untranslatable
This patch makes displayed record types translatable
To test:
1) Go to Administration > Z39.50 servers
2) On column Record type the value is 'biblio' or 'authority'
3) Apply the patch
4) Reload the page, now record type must show 'Bibliographic'
or 'Authority'
5) Update translation file for a language, verify new entries
Strings are already on translation file, only a reference
for new entry on the file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The same fix needs to be used for the 'Supplemental issue' part.
To test, use the same test steps used for the previous followup,
but choose "Arrived" in the 'Supplemental issue' row.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix the display of items information
following changes on previous patch.
To test:
1. Go to serials
2. Add a subscription
3. Receive an issue
4. Change status to Arrived
Item information display correct labels,
but no pulldowns, that's the bug
5. Apply the patch
6. Reload page, change to Arrived again,
this time pulldowns must be right
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
As Katrin suggest:
- check the manual history box in one of your subscriptions
- go to the subscription detail page, on the planning tab is the
link to the manual history (bit hidden)
There is the typo, fixed now.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes typo correctly, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Wed, 30 Jul 2014 07:12:44 +0000 (09:12 +0200)]
Bug 12749 - Better translatability for list module
This patch changes wording of explanations in list module to make them better translatable.
Additionally, it removes explanation for "Open list" from help screen, because this choice is not available.
To test:
Go to Home > Lists > Public lists > Create new list
Verify that the text changed to "Private list:..." rsp. "Public list:..." in right part of screen and on help screen.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 766: Remove CGI::scrollinglist from marctagstructure.pl
This patch removes the only instance in this file.
Don't know if the feature is of some utility, seems
that does not work (no use of auth values as indicators
on MARC editor)
To test:
1. Apply the patch
2. Go to Administration > MARC frameworks
3. Clic on MARC structure of any fw
4. Clic Edit on any tag
5. On tag editor check the pulldown 'Authorised value', that was replaced
6. Check for regressions: select a value, save, verify the value, change
again, etc.
Note: removed a SELECT, using now C4::Koha::GetAuthorisedValueCategories
Do not we need an AuthorisedValues.pm? (on C4 or Koha)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 766: Remove CGI::scrollinglist from authorised_values.pl
This patch removes the only instance in this file.
Also fixes array sorting, removes some tabs, removes
an unneeded $dbh handler (there is a global one).
Makes use of C4::Koha::GetAuthorisedValueCategories.
To test:
1. Apply the patch
2. Go to Administration > Authorised values
3. Replaced pulldown next to 'Show category' must
show all (present & system) categories correctly ordered.
4. Select some and check for regressions, e.g. CCODE, Bsort2, YES_NO
no changes must be observed
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 766: Remove CGI::scrolling_list from aqplan.pl
This patch removes 3 occurences on aqplan.pl
To test:
1. You need a budget and a fund
2. Apply the patch
3. Go to Aquisitions, click on your fund
4. Select one of the options on pulldown Planning
e.g. "Plan by months"
5. Now to the left there are two boxes, Filter and Export
a) Filter: (1) pulldown below 'Select planning type'
check that works selecting other values and submit
This pulldown showed originally code types,
untranslatable BTW. Added a TT block to allow translation
and shows legends that match Planning pulldown, but not
the order.
b) Export: pulldowns for filetype (2) and delimiter (3)
Those have originally one value each, and for me Export
does not work, before or after patch, but check that
pulldown exist.
Notes:
A) 5.a) I can change de order of main Planning pulldown,
is harcoded. The values for Filter pulldown are sorted on
aqplan.pl. Is one or the other.
If desired, TT block can be moved to includes/budgets-admin-toolbar.inc
(where hardcoded Planning lives)
B) 5.b) Moved 'Export' legend inside it's box, like Filter.
C) Finally: there is something strange, before or after patch.
There is an empty option 'Planning by " if you select planning
using main pulldown, it disappears if you select planning using
Filter (not a mistery, using Planning fills $auth_cats_loop,
using Filter submit button does not)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Looks like this needs more work, but no regressions found that were
caused by the patch.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 16 Jul 2014 17:02:25 +0000 (13:02 -0400)]
Bug 9013 - Cart in staff interface displays location pulled from Description (OPAC)
When the cart in the staff client pulls description data for
items.location and items.ccode it pulls the value designated for the
OPAC--probably a cut-and-paste error when the feature was added to the
staff client.
This patch removes the 'opac' parameter from GetKohaAuthorisedValues.
To test you must have at least one LOC authorized value configured to
have different descriptions for staff and OPAC. Locate or edit an item
with that shelving location and add that record to the cart in the staff
client.
When you view the cart, the shelving location description in the "Items"
column should show the description for the staff client, not the OPAC.
Signed-off-by: Nick Clemens <nick@debian> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 1 Aug 2014 18:58:35 +0000 (14:58 -0400)]
Bug 12693 - colspan calculation done by members/statistics.pl should be moved to template
It is not necessary for the patron statistics script to pass a colspan
value to the template. The number can be output using Template::Toolkit
syntax.
To test, view the statistics page for a patron. Confirm that the "Total"
cell in the footer spans the correct number of columns. Test with
various numbers of fields in the StatisticsFields system preference.
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 18 Jul 2014 18:18:12 +0000 (14:18 -0400)]
Bug 7944 - attribute error could be clearer
If you try to create a patron and enter an extended attribute value
which is required to be unique but exists in another record the error
you receive is not clear. It uses the attribute code instead of the
description. This patch adds description to the output.
To test you must have ExtendedPatronAttributes enabled.
- Edit or create an extended patron attribute and designate it a unique
identifier.
- Edit a patron and add a value to that attribute.
- Edit another patron and try to add the same value.
You should get an error which includes both the description of the
attribute you tried to modify and the value you submitted.
Signed-off-by: Christopher Brannon <christopher@debian.brannon.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and Qa script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jacek Ablewicz [Thu, 7 Aug 2014 08:29:37 +0000 (10:29 +0200)]
Bug 12727 - Patron category filter in batch patron deletion tool is broken
After commit 6973e3b7d50777a147a29f2f3d213a6175c9eb74, patron category
filter in batch patron deletion tool (tools/cleanborrowers.pl) doesn't
work properly any longer. It's still possible to choose a patron
category as selection criterion, but this criterion is being
efectivelly ignored on futhers steps.
As a result, all patrons (with no check-outs and no outstanding
account balance) may get mistakenly deleted when using this tool,
despite their respective categories.
To test:
1/ apply patch
2/ follow the test plan[s] for Bug 11975
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutines AddModification and ApproveModifications uses DBIx::Class instead of C4::SQLHelper.
Moreover, the tests has been wrapped in a transaction.
Test plan:
1) Apply the patch
2) Execute the unit tests by launching :
prove t/db_dependent/Koha_borrower_modifications.t
3) The result has to be a success without error or warning :
t/db_dependent/Koha_borrower_modifications.t .. ok
All tests successful.
Files=1, Tests=14, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.60 cusr 0.08 csys = 1.72 CPU)
Result: PASS
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 21 Jul 2014 09:03:12 +0000 (11:03 +0200)]
Bug 12700 - Capitalization: "Close Help Window" in context help
To test:
- Open help in any page of staff client
- In help popup window, see wrong capitalization in button 'Close Help Window'
- Close the popup window
- Apply patch
- Check again: Button now reads "Close help window'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we're using the $query_type variable to detect if this pre-built
query is PQF, we need to use PQF syntax (rather than QueryParser
syntax) when adding to the query. I've made a lot of notes of somewhat
incoherent notes on Bugzilla talking about PQF, CCL, and QP syntaxes,
but I'm hoping to refine these notes on a wiki page for future
reference.
_TEST PLAN_
1) Set 'Suppress in Opac' (ie 942$n) to 1 for one record
2) Re-index Zebra
3) Set 'OpacSuppression' to 'Hide'
4) Set 'UseQueryParser' to 'Do not try'
5) In the staff client, do a search that will return that suppressed
record as well as a few records that are NOT suppressed
6) Note that you can return that suppressed record in the staff client
7) Do the same search in the OPAC
8) Note that the suppressed record doesn't appear
9) Set 'UseQueryParser' to 'Try' && re-run the OPAC search
10) Note that no results appear (the logs will probably mention a
ZOOM error)
11) Apply patch
12) Re-run the OPAC search
13) Note that the suppressed record doesn't appear, and that the
not suppressed records are showing (it's important that you are
getting some results...as ZOOM errors are silent in the UI).
14) Set 'UseQueryParser' to 'Do not try'
15) Re-run the search
16) Note that the suppressed record doesn't appear, and that the
not suppressed records are showing
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - hidden records are hidden.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Wed, 12 Mar 2014 17:43:20 +0000 (17:43 +0000)]
Bug 10542: Fix QueryParser with OpacSupression
OpacSupressions manipulates the query string after the buildQuery
call and so breaks with queryParser enabled. This patch adds
checks for queryParser and manipulates the query before passing it
to buildQuery if it is enabled, but leaves the post buildQuery
manipultation when queryParser is disabled
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Adding a sing after test
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12647: PQF QueryParser driver and unit tests fixes
Due to Perl 5.18, QueryParser the default search class is no longer
'keyword' (see bug 12738), and needs to be set manually. This patch
adds a line that does that. The problem that gets fixed is with test
'super simple keyword query'.
The rest of the non-deterministically failing tests are due to the same
problem, keys returning differently sorted keys from hashes.
So this patch sorts keys in the step that concatenates attributes when building
the PQF queries (and tests get adjusted to match the now deterministic result).
I did that (sorting there) under Jared's recommendation. Hopefuly he will step
in and comment/fix any mistake I made. My main concern was a possible loss
in performance. That we agreed it is almost void, because of the tiny size
of the hash.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests are passing now again :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12738: C4::Context should set 'keyword' as the default search class
On a Perl 5.18 environment (e.g. Ubuntu 14.04 LTS):
To reproduce:
- Have UseQueryParser == "Don't try"
- Perform a search typing just a word that would have many matches on your Zebra db.
- Take note of the search results count.
- Make sure you have the queryparser.yaml file in your config dir.
- Set UseQueryParser == "Try"
- Perform the same search a couple of times
=> FAIL: Notice that the search results count differs from one run to the other.
- Run the regression tests
$ prove -v t/db_dependent/QueryParser.t
=> FAIL: tests fail
To test:
- Apply the patch
- Run tests
$ prove -v t/db_dependent/QueryParser.t
=> SUCCESS: tests pass
- Repeat the steps 'To reproduce'
=> SUCCESS: Search results count is deterministic :-D
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Now search with QueryParser always returns the correct number of
results on a system with the newer Perl version.
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12738: (regression tests) C4::Context should set keyword search as default for QueryParser
This patch introduces tests for the QueryParser PQF driver usage in Koha. Specifically its
initialization on C4::Context, and initial setup.
It also introduces a .pl script that is used to load C4::Context with different hash randomization
seeds on purpose, to verify the initialization result is deterministic and consistent between
runs.
To test:
$ prove -v t/db_dependent/QueryParser.t
It should fail because different default_search_class is set on each run, and it is not often the
one we expect.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Viktor Sarge [Thu, 19 Jun 2014 09:13:14 +0000 (10:13 +0100)]
Bug 5672: Gives RSS icons to catalog search history placed to the left of saved searches
Test plan:
* Verify that there is no RSS icons for saved searches in opac
* Install the patch
* Verify that there is no RSS icons for saved searches and searches for the current session in Opac.
* Test that the RSS links produce the expected result.
Note: I left out authority searches since I have very little experience with authority searches and didn't feel I could test it properly. Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Viktor Sarge [Tue, 17 Jun 2014 08:15:40 +0000 (09:15 +0100)]
Bug 5672: Gives RSS icons to catalog search history
This patch adds an extra column to the table for the search history (this session and previous searches) with RSS icons for each search.
Test plan:
* Verify that there is no RSS icons for saved searches in opac
* Install the patch
* Verify that there is no RSS icons for saved searches and searches for the current session in Opac.
* Test that the RSS links produce the expected result.
Note: I left out authority searches since I have very little experience with authority searches and didn't feel I could test it properly. Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Colin Campbell [Fri, 18 Jul 2014 08:50:34 +0000 (09:50 +0100)]
Bug 12600: remove duplicate use statement from code
A use C4::Charset was added deep in the body of the code
we have already imported it at the top of the file
(the by convention normal place) As use is executed at compile time
specifying it in the code body does not serve a
useful purpose and detracts from the readability of an already
overly complex subroutine.
Remove the superfluous statement
also removed the tabs introduced to the surrounding lines
by the same commit
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Search still works, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 11 Jul 2014 15:16:38 +0000 (11:16 -0400)]
Bug 5502 - Patron card category search field should be menu
When searching for patrons to add to a patron card creator batch there
is a text input field for submitting a patron category. This should be a
dropdown menu. This patch corrects it.
To test, go to Tools -> Patron card creator and click "New batch."
- Click the "Add item(s)" button.
- Confirm that in the Patron search pop-up window there is a dropdown
menu populated with existing patron categories.
- Confirm that searches limited by patron category return correct
results.
- Confirm that the correct patron category is automatically preselected
after performing a search limited by category.
- Confirm that reordering the table of search results works correctly.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8148: (regression tests) C4::Auth_with_ldap needs unit tests
This followup provides some unit tests for C4::Auth_with_ldap. It implements
regression tests for this bug's changes too.
The aim was to cover all use cases for checkpw_ldap from the first line up to
those touched by this bug's patches. It should serve as a start for having
unit tests for the LDAP thing.
Having said that: no excuses for not providing regression tests for LDAP from now on :-/
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8148 - LDAP auth_by_bind doesn't fallback to local auth
This patch covers LDAP auth_by_bind configuration so that wrong
LDAP password will return -1 to C4::Auth so we can abort local auth
and prevent users logging in with stale database passwords.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Frédérick [Wed, 19 Feb 2014 15:59:59 +0000 (10:59 -0500)]
Bug 8148: Only update the password if the LDAP password field was mapped
http://bugs.koha-community.org/show_bug.cgi?id=8148 Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Frédérick [Wed, 19 Feb 2014 16:55:35 +0000 (11:55 -0500)]
Bug 8148: Prevent local authentification fallback if an invalid LDAP password was entered.
http://bugs.koha-community.org/show_bug.cgi?id=8148 Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
0) Put an item in hold for pickup;
1) In Circulation -> Holds awaiting pickup, validate email (column Patron);
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and will use the first valid email address.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11673: columns.def has swapped last and first name of alt contact
To test:
- Create a new guided circulation report
- On the field list scroll to "Alternate contact: Last name"
=> FAIL:
"Alternate contact: Last name" relates to borrowers.altcontactfirstname
"Alternate contact: First name" relates to borrowers.altcontactsurname
- Apply the patch, restart the creation of the report
=> SUCCESS:
"Alternate contact: First name" relates to borrowers.altcontactfirstname
"Alternate contact: Surname" relates to borrowers.altcontactsurname
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Patch behaves as expected Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 27 May 2014 13:25:02 +0000 (09:25 -0400)]
Bug 4045 - No check for maximum number of allowed holds.
Re-add the system preference maxreserves.
All the code using maxreserves is still in place. Though it
is not used in the Reserves module, it is used in all the
scripts where holds are placed.
Also adds a check so that a borrower cannot exceed the maximum
number of allowed holds by using the multi-hold feature via
the opac.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Set maxreserves to 3, set opactheme to bootstrap
4) Log into the opac as a patron
5) Place 3 holds
6) Attempt to place a 4th hold
7) Note you get an error message and cannot place a forth hold
8) Delete two of those holds
9) Attempt to place 3 or more holds as a multi-hold
10) You should see a warning that you cannot place this many holds
11) Try to anyway
12) You should see an alert to tell you to reduce the number of holds
you are placing.
13) Reduce the number for holds you are placing to 2
14) Your holds should now be placed
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 21 Jul 2014 10:25:21 +0000 (12:25 +0200)]
Bug 12699 - Capitalization: All Libraries in pull down on news tool page
To test, got to tools > news
- In pulldown and in table, "All Libraries" should now read "All libraries"
- Create additonal news for "All libraries". Pull down in form should read "All libraries" as well
- Make sure that news for "All libraries" diesplay correctly where they should (in OPAC and Staff client)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 29 Jul 2014 19:08:33 +0000 (15:08 -0400)]
Bug 12635 - Course reserves item list should use "Checked out" instead of "On Loan"
When viewing the list of items on a course reserve list, if the item is
checked out it is indicated by the phrase "On Loan." The default
templates should always use "checked out" instead of "on loan." Also
corrected: the capitalization of "Item Lost."
To test, Course Reserves must be enabled and you must have an existing
course reserves with items on it, one of which should be checked out.
View the list of items on that Course Reserve and confirm that the table
says "Checked out."
Table in staff client displays "Checked out" / "Item lost" Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12686: Make more selected option XHTML compliant
This patch fixes several occurrences of selected
options that do not follow XHTML style rule for
markup.
To test:
1. Apply the patch
2. There are no functional changes at all,
only a more strict markup
Changed all cases I can found.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Evonne Cheung [Fri, 21 Nov 2014 01:10:08 +0000 (14:10 +1300)]
Bug 10220 IDs on checkin columns
Test: go to Circulation > Check in, table has ID and each column has a
class.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds a class to every th and td element in the check-in table.
Works as describe, no regressions found.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Replace some tab with spaces.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 28 Jul 2014 16:11:33 +0000 (12:11 -0400)]
Bug 12597 - Give better visual indication of currently-selected language in the staff client
There is currently no visual feedback to the user reflecting which of
multiple installed translations is currently selected. I think some
necessary styling didn't make it into the conversion to Bootstrap menus.
This patch attempts to improve things.
Most of the changes are to bring back the previous style of highlighting
the currently selected language. A new change is the addition of the
sub-language code to the display of the menu label if one of that menu
item's sub-languages is selected.
This patch also removes some obsolete CSS which referred to the old menu
system.
To test, apply the patch and install or update multiple languages,
including at least two sub-languages. In my test I used en, en-GB and
de-DE. Clear your browser cache if necessary. Enable all these languages
and test the functionality of the language selection menu in the footer.
- Non-enabled languages should appear as non-bold links.
- When a single language (with no sub-languages) is enabled it should
appear as bold text.
- When one of multiple sub-languages is enabled that selection in the
pop-up menu should appear as bold text. The menu label should show in
bold the language code of the selected sub-language.
Tested with de-DE and de-CH, works as expected Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests. No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 15 Jul 2014 19:35:54 +0000 (15:35 -0400)]
Bug 8521 - Error in warning message when deleting list
When deleting a list the operation is blocked if there are items still
on the list, and the interface shows a warning which includes a count of
the items on the list. This count is broken for lists containing more
items than the number specified in the numSearchResults system
preference.
This patch corrects the item count to use an actual count of the total
number of results, not the total number of results in the first page of
results.
The template change to the staff client copies some language logic from
the OPAC template for dealing with a single number of list entries.
Test in both the OPAC and the staff client.
Check the number specified in the numSearchResults system preference and
locate or create a list containing more than that number of items. Try
to delete the list. You should receive a warning message stating the
correct total number of items on the list.
Test also with a list which contains fewer than numSearchResults
entries, and a list which contains zero entries.
Signed-off-by: Ian Beardslee <ian@catalyst.net.nz>
Tested Public and Private lists with 0, 5 & 25 entries, Public with 40 and Private with 45. Working as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jacek Ablewicz [Tue, 22 Jul 2014 15:57:01 +0000 (17:57 +0200)]
Bug 12619 - Shipment date gets lost on finishing and/or editing the invoice
To reproduce:
- Create a new shipment, make sure to add a shipment date
- Receive or not receive orders
- Finish receiving with the button at the bottom of the page
- Verify that shipment date is now empty
To test:
- reproduce the aforementioned issue
- apply patch
- confirm that the issue is no longer rerpoductible (= shipment date is
not getting lost any longer), and that there are no apparent regresssions
of any kind involving invoice shipment date entering and/or editing
- sign off
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, fixes the issues, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brendon Ford [Fri, 13 Jun 2014 00:28:28 +0000 (20:28 -0400)]
Bug 12407: phone label or data switched
Fix for switched phone numbers on patron details page.
This patch fixes switched phone numbers on patron details page and also makes phone number labels more uniform.
To Test:
1. Apply the patch.
2. Create/modify a patron entering some unique data into the "Secondary phone:" and "Other phone:" fields (different data for each).
3. Save the patron record.
4. Go to the patrons details page and make sure the data entered into the "Secondary phone:" field is displaying next to the "Secondary phone:" label and that the data entered into the "Other phone:" field is displaying next to the "Other phone:" label.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11331 - CSV export for viewlog.pl is missing newlines - followup
Perl formatting and cleaning.
Also corrects the HTML of results table in viewlog.tt.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11331 - CSV export for viewlog.pl is missing newlines
When you try to export the result of tools/viewlog.pl in csv, file
cannot be correctly loaded :
- newline is missing after each record,
- strings should be enclosed in ""
- columns are not the same as for screen output
This patch corrects this by using like other export Text::CSV.
Adds a header line made with the keys of first data. For that, all data
values are initialiszed with empty string.
Test plan :
- Use a database with some logs, see sysprefs
/cgi-bin/koha/admin/preferences.pl?tab=logs
- Go to export page /cgi-bin/koha/tools/viewlog.pl
- Select a module
- Click on "To a file" and choose a file name
- Click on "Submit"
- Open file
=> Without this patch : newline is missing, multi-lines cells are not
enclosed in "", there are no column headings
=> Without this patch : each line is a data line, complexe cells are
enclosed in "", there are column headings
- Test the export of all modules to see that all headings are necessary
- Check the output to screen in the browser
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The CSV export is significantly improved. I question the usefulness of
including biblioitemnumber in the output. A better inclusion would be
itemnumber.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
While this feature is still not perfect, this is a big improvement.
Passes tests and QA script, restores basic functionality.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brian Norris [Fri, 25 Jul 2014 02:55:04 +0000 (14:55 +1200)]
Bug 12660:Correct mispelling of accomodate in comments
View the file in your git checkout to see the misspelling of accomodate
do the patch
view the files again to see the correct spelling accommodate
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes typos to correct spelling.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10648 - In records merge greatest field can not be added
When merging 2 records (/cgi-bin/koha/cataloguing/merge.pl), the destination record is build using the fields and subfields checked in source records.
When a field is checked, the javascript code searches in destination record a field with a greater tag number to insert new field before.
When the new field tag number is greater than all existing field tag numbers, the field is not added.
This patch corrects this by adding at end if no greater field tag number exists. Also adds a sort of fields by tag number because all mergo code is based on this.
Test plan :
- Add to a framework a repeatable field with the greater non existing tag number. For example 998.
- Edit 2 records with this framework and add them a value in this tag.
- Put those records is a list
- Go to this list and check the two records
- Click on "Merge selected"
- Click on next
- Go to second source record
- Click on the greatest tag number. for example 998.
=> The field is added at the end of destination record
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described, no regressions.
Owen Leonard [Wed, 16 Jul 2014 19:32:08 +0000 (15:32 -0400)]
Bug 4013 [Revised] road type missing on search results
On the patron search results page there are several patron fields which
do not show: street number, road type, and state. This patch adds them.
To test, go to Patrons -> Search patrons and perform a search. In the
table of patron search results each patron record should display the
correct information including street number, road type, and state.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described.
David Cook [Fri, 1 Aug 2014 06:42:34 +0000 (16:42 +1000)]
Bug 12690 - opacuserjs gets loaded twice in self checkout
This patch removes a second instance of "opacuserjs" in the opac
self-checkout.
_TEST PLAN_
1) Enable OPAC Self-checkout in the system preferences
2) Type the following code into your "opacuserjs" system preference:
alert("This is a test");
2) Visit /cgi-bin/koha/sco/sco-main.pl
3) Note that you get a pop-up saying "This is a test" twice.
4) Apply the patch
5) Refresh /cgi-bin/koha/sco/sco-main.pl
6) Note that you now only get a pop-up saying "This is a test" once.
Followed test plan, patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
opac-bottom.inc already adds opacuserjs, so the additional line
in this template can be removed.
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12673: Remove CGI::scrolling_list from C4::Items.pm
This patch removes only instance in this file
To test:
1. Apply the patch
2. (Esay way) Put on staff URL
/cgi-bin/koha/services/itemrecorddisplay.pl?biblionumber=N&itemnumber=M
3. Code replaced corresponds to pulldowns, verify information
is correct (check with another item edit view)
PrepareItemrecordDisplay() in Items.pm is filled with chunks of
HTML code that must be put on TT file. For now scrolling_list
is the only removed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested different item edit displays and the URL given above,
no regressions found. Also passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
to test:
1. Apply the patch
2. Run the test, prove t/db_dependent/Koha.t
3. Check that it pass
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12675: Remove CGI::scrolling_list from labeledMARCdetail.pl
This patch removes only instance in this file.
Also updates getframework POD on C4/Koha.pm,
adds new GetFrameworksLoop() func on same file from
suggested code, but with ordered result.
To test:
1. Apply the patch
2. Enable viewLabeledMARC syspref
3. On staff, search for a record, goto detail view
4. Clic on Labeled MARC
5. Framework pulldown was replaced, check changing
framework.
A bug was fixed, because selecting any fw and then Default
tries to load values from 'Default' fw code, which does not
exists.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 28 Jul 2014 15:35:47 +0000 (11:35 -0400)]
Bug 12677: Use Bootstrap "label" style for inline OPAC renewal messages
This patch revises the styling of the renewal success message to use a
default Bootstrap style more suited to inline messages. I think this is
preferable to using the alert style because the alert is designed to be
a block-level element.
Because Koha's CSS already uses a "label" class for something else I
duplicate the Bootstrap "label" class in opac.css as "blabel." The
Bootstrap color definitions are included.
To test, follow the test plan already provided:
1) Apply this patch
2) From the OPAC, renew some items
3) Note the "Renewed!" message in the "Renew" column of the checkouts
table
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12668 - Stray dollar ($) -sign in opac-reserve.pl
A dollar sign is hard-coded in opac-reserve.pl and becomes apparent when trying to place a reservation
when one has "too_much_oweing" or too much fines.
Removing the dollar sign so we just get
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja 9.50.">
instead of
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja $9.50.">
Patch removes hard coded $ sign. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The dollar sign is gone and the message still displays correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a missing help file for the staff search history page.
To test:
* Turn on EnableSearchHistory
* Do a search in the catalog
* Click your username in the top right and choose 'search history'
* Click 'help' in the top right
* Confirm that help file is there
* note: link to manual won't work until after 2014-08-01 in the USA
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log