Marc Véron [Thu, 21 Apr 2016 19:13:46 +0000 (21:13 +0200)]
Bug 16322 - Translatability: "Unknown" in suggestion/suggestion.pl not translatable
This patch adds translatability for the tab "Unknown" in
koha-tmpl/intranet-tmpl/prog/en/modules/suggestion/suggestion.tt
To test:
- Apply patch
- Examine koha-tmpl/intranet-tmpl/prog/en/modules/suggestion/suggestion.tt
and verify that it handles the label "Unknown" (line 496)
- Go to suggestion/suggestion.pl, set status of a suggestion to -- Choose a status --
and verify that the tab "Status unknown" appears
- Bonus test: Go through a translation process and verify that "Status unknown" is
translated
Note: If you have a suggestion with unknown status, all suggestions are listed under
this tab. This is not in the scope of this bug; this bug is about translation
only.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Magnus Enger [Thu, 21 Apr 2016 12:58:11 +0000 (14:58 +0200)]
Bug 16316 - Limit patron search to surname
This patch makes it possible to limit a patron search to
search just for surnames.
To test:
- Apply the patch
- Add two patrons, called e.g. "John Doe" and "Doe John"
- Go to Patrons in the Intranet
- Make sure you have selected "Search fields" = Standard
- Search for "john" and verify both patrons show up
- Search for "doe" and verify both patrons show up
- Set "Search fields" = Surname and search for "john".
"Doe John" should show up, but not "John Doe".
- Set "Search fields" = Surname and search for "doe".
"John Doe" should show up, but not "Doe John".
Update: Revised the last point in the test plan.
Sponsored-by: Alingsås Public Library, Sweden Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 20 Apr 2016 12:31:16 +0000 (08:31 -0400)]
Bug 16301 - Remove the use of "onclick" from SMS cellular providers template
This patch refactors some of the JavaScript in the SMS cellular
providers template so that event attributes are removed from the markup.
This patch also updates the markup for the "Edit" and "Delete" buttons
to make them consistent with similar buttons in Koha.
To test you must have the SMSSendDriver system preference set to
"Email."
- Go to Administration -> SMS cellular providers.
- If necessary, create a new SMS cellular provider.
- Edit at least one patron to use an SMS cellular provider under "Patron
messaging preferences."
- In the table of SMS cellular providers:
- Click the "Edit" button. The correct edit form should be displayed.
- Click the "Delete" button next to a provider which is not used by
any patrons. You should see an error message, "Are you sure you want
to delete [provider name]." Test both cancel and confirm.
- Click the "Delete" button next to a provider which is in use by one
or more patrons. YOu should see an error message, "Are you sure you
want to delete [provider name]? X patron(s) are using it!" Test both
cancel and confirm.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 20 Apr 2016 01:02:05 +0000 (21:02 -0400)]
Bug 16305 - Remove the use of "onclick" from transport cost matrix
This patch updates the transport cost matrix template to eliminate the
use of event attributes (onclick and onblur) in favor of JS separate
from the markup.
To test, apply the patch and go to Administration -> Transport cost
matrix.
- Click in any table cell. Form fields in the cell should activate.
- Check and uncheck the "disable" checkbox. The form field should be
correctly disabled and enabled.
- Fill various enabled fields and submit the form to confirm that data
is saved correctly.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 20 Apr 2016 13:36:20 +0000 (09:36 -0400)]
Bug 16308 - Remove the use of "onclick" from Z39.50/SRU servers template
This patch removes the use of event attributes in the markup in favor of
attaching events in JavaScript.
This patch also revises the SRU search fields mapping template
considerably while correcting multiple HTML validation issues:
- Corrected label/id pairs.
- Corrected incorrect capitalization.
- Removed redundant <legend>
- Restructured form so that it displays in two columns.
Also changed in the z3950 servers template: Replaced empty [%
script_name %] variable with actual path.
To test, apply the patch and go to Administration -> Z39.50/SRU servers/
- In the list of servers, select Actions -> Delete. You should be
prompted to confirm your choice. Test both confirming and cancelling.
- Create or edit an SRU server.
- After entering text in the server name field, moving to the next
field should trigger transformation of that text to upper case.
- On the SRU Search fields mapping line, clicking the "Modify" button
should trigger a popup.
- In the "Modify SRU search fields mapping" popup:
- The fields should display in two columns.
- All labels should be correctly associated with corresponding
inputs.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 19 Apr 2016 17:58:12 +0000 (13:58 -0400)]
Bug 16299 - Use validation plugin when creating a patron attribute type
This patch replaces custom client-side form validation with use of the
jQuery validation plugin. Besides reducing the amount of code in the
template, this allows us to eliminate use of "onclick."
This patch also makes a correction for HTML validity: <option value=""
/> is not accepted. I have also added an id attribute to a <select>
which lacked it.
To test, apply the patch and go to Administration -> Patron attribute
types.
- Test creating a new patron attribute type. Try to submit the form
without a code, description, or both. You should be prevented from
doing so.
- Test editing an existing patron attribute type. You should not be able
to remove the description and have it save successfully.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Fri, 8 Apr 2016 12:11:11 +0000 (08:11 -0400)]
Bug 16228 - Move some patron entry form JavaScript into members.js again
Bug 15206 undid the changes Bug 15692 made to memberentrygen.tt. This
patch re-removes the JS from the template and moves the additions made
by Bug 15206 into members.js.
Two other minor edits: Changes to quiet JSHint errors.
To test, apply the patch and repeat the test plan for Bug 15692. Confirm
that the following interactions still work on the patron entry form:
1. clear_entry(): With ExtendedPatronAttributes enabled, the "Clear"
link next to any attribute form field should work to clear the field.
2. clone_entry(): With ExtendedPatronAttributes enabled and a repeatable
attribute defined, it should be possible to click the "New" link to
add another instance of that attribute's entry field.
3. update_category_code(): With ExtendedPatronAttributes enabled and an
attribute defined which is limited to a single patron category,
changing the patron category selection should correctly show or hide
the attribute entry form.
4. select_user(): When adding or editing a patron with a "Child"
category it should be possible to search for and select a guarantor
to add to the record by clicking the "Set to patron" button.
Selecting a new guarantor should change the text of the button from
"Set to patron" to "Change."
5. noEnterSubmit(): This function should be correctly preventing you
from hitting "ENTER" in any form field to submit the form.
6. guarantordelete(): When adding or editing a patron with a "Child"
category, it should be possible to clear existing guarantor
information by clicking the "Delete" button. Clicking the "Delete"
button should change the text of the adjacent button to "Set to
patron."
7. select_city(): With one or more cities defined it should be possible
to use the drop-down menu of cities to populate the city, state, zip,
and country fields.
8. Date of birth entry should have a maximum date limit of yesterday.
The drop-down menu of years should go back 100 years.
9. Selecting a date of birth should replace the date format hint with a
message showing the user's age in years or months. Test with values
which will show an age of 1 month, between 2 and 11 months, 1 year,
and more than one year.
10. Client-side validation rules should be in effect, requiring that a
valid email address be entered in the primary email, secondary email,
and alternate address email fields.
11.When editing a patron, the "Add manual restriction" link should
display the form for adding a manual restriction, and clicking the
"Cancel" link should hide it.
Followed test plan, everything works OK. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 19 Apr 2016 16:40:29 +0000 (12:40 -0400)]
Bug 16297 - Remove the use of "onclick" from OAI sets configuration template
In order to bring the OAI sets configuration template into compliance
with coding guideline JS9, this patch changes with way some JavaScript
events are handled by moving JS handling out of the HTML markup.
To test, apply the patch and go to Administration -> OAI sets
configuration.
- Create or edit a set.
- Test the "Add description" link. Clicking it should add a
description textarea.
- Test the "Remove" link associated with multiple description lines.
Click them should remove the corresponding textarea.
- Test that additions and removals are saved correctly.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 19 Apr 2016 16:56:38 +0000 (12:56 -0400)]
Bug 16298: Standardize on "Patron categories" when referring to patron category administration
This patch modifies references to the patron categories administration
page in two places: Replacing "Patron types and categories" in the
administration sidebar menu and replacing "Patron category
administration" in the heading of categories.tt. Both should now read
"Patron categories."
To test, apply the patch and confirm that the text has been updated
correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Text has been updated correctly
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Fri, 15 Apr 2016 18:56:14 +0000 (14:56 -0400)]
Bug 16286 - Use validation plugin when adding or editing patron category
This patch updates the patron category entry form so that it is
validated using the staff client's globally-included form validation
plugin. This patch also moves the page's JavaScript into a separate
file.
To test, apply the patch and go to Administration -> Patron categories.
- Create a new category. Try to submit the form with the following
fields empty:
- Category code
- Description
- Both enrollment period fields
- Category type
- Try to enter data in the category code field which contains characters
other than letters, numbers, hyphens, or underscores.
- Try to enter non-numeric data in the following fields:
- Enrollment period in months
- Age required
- Upper age limit
- Enrollment fee
- Hold fee
- Try to submit the form with both enrollment period fields filled.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 14 Apr 2016 17:40:17 +0000 (13:40 -0400)]
Bug 16262 - Remove the use of "onclick" from acquisitions basket template
In order to bring the acquisitions basket template into compliance with
coding guideline JS9, this patch changes with way some JavaScript events
are handled by moving JS handling out of the HTML markup.
Also changed: Replaced the use of [% script_name %] (which is
undefined), with the actual script path.
To test, apply the patch and locate an open basket in Acquisitions which
has more than one order in it.
- Test the "Managed by: Add user" button and verify that it triggers a
popup where you can search for patrons.
- Select two or more patrons to be managers for the basket.
- Close the search windows and confirm that your choices appear on the
basket page.
- Click "Delete user" next to one of the patrons. The patron should be
removed.
- Click "Save changes" and verify that your choices are correctly
saved.
- Click "Delete user" next to one of the remaining patrons. The patron
should be removed.
- Click "Save changes" and verify that the patron stays deleted.
- In the list of orders, click the "Transfer" link and confirm that the
correct pop-up window is triggered.
- Test the "Delete this basket" button in the toolbar. A modal window
should be triggered.
- In a basket with orders:
- The "Delete basket and orders" button should do what it says,
leaving associated bibliographic records intact.
- The "Delete basket, orders, and records" button should do what it
says, deleting any bibliographic records associated with orders.
- In a basket with no orders:
- The "Delete basket" button should work correctly.
- Test the "Create edifact order" button.
- Click "Send EDI order" on the resulting page.
- In the resulting dialog, "Are you sure you want to generate an
edifact order," verify that both the "Yes" and "No" options work
correctly.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Fri, 15 Apr 2016 14:18:37 +0000 (16:18 +0200)]
Bug 16270 (followup) Typo authentification vs authentication
Additionally fix typo in following files:
koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/opac.pref
koha-tmpl/opac-tmpl/bootstrap/en/modules/errors/errorpage.tt
To test: Apply patch, verify in files that authentification is
replaced by authentication
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 15 Apr 2016 07:05:37 +0000 (08:05 +0100)]
Bug 16270: Typo authentification/authentication
Test plan;
Trigger /cgi-bin/koha/errors/404.pl
Confirm the typo without the patch and that it's fixed with this patch
applied.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 26 Apr 2016 18:25:14 +0000 (18:25 +0000)]
Bug 16257 - EDIfact messages link on tools page results error
There is a link to EDIfact messages on the tools home page that will
lead to an error. I assume that the link should be removed in favor of
the link on the acquisitions homepage.
Test Plan:
1) Note the EDIfact messages link on the Tools home page
2) Apply this patch
3) Refresh the page, the link should be gone
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16253: Changing 'delete order' to 'cancel order'
To test:
1) Go to Acqui -> do a vendor search and view an open basket
2) Confirm last column heading says cancel instead of delete
3) Confirm link to cancel order says cancel instead of delete
4) If can't delete record, confirm reasons say cancel order instead of delete
5) Click the vendor name, then Baskets tab, then Receive Shipment
6) Fill vendor invoice field and click next
7) If there are any pending orders, confirm that all instances of 'delete order' now say cancel
Sponsored-by: Catalyst IT Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 25 Apr 2016 12:06:37 +0000 (08:06 -0400)]
Bug 16242 [Follow-up] Move staff client JavaScript out of language directory
Correcting to a file I missed: circ/offline.tt. This patch corrects the
path to offlinecirc.js.
To test, go to Circulation -> Built-in offline circulation interface.
There should be no errors in the console warning of missing files. The
"Check out" link should work correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
File missed was fixed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 12 Apr 2016 17:50:54 +0000 (13:50 -0400)]
Bug 16242 - Move staff client JavaScript out of language directory
This patch moves the JavaScript files in prog/en/js to prog/js.
JavaScript files do not need to be in the directory which is processed
by the translator.
To test, apply the patch and visit various pages in the staff client to
confirm that JavaScript files are still loading correctly.
Revised: I intended for this to be built on top of Bug 15883 as well as
Bug 16242. Now it is.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of 15883 and 16241
All seems to work, js files pulled from new dir.
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Wed, 13 Apr 2016 18:51:06 +0000 (20:51 +0200)]
Bug 16238: Use .prop() instead of .attr() for 'readonly'
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Wed, 13 Apr 2016 18:27:49 +0000 (20:27 +0200)]
Bug 16238: Use .prop() instead of .attr() for 'disabled'
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Wed, 13 Apr 2016 08:31:05 +0000 (10:31 +0200)]
Bug 16238: QA fix: remove tab characters
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Sat, 9 Apr 2016 05:58:42 +0000 (07:58 +0200)]
Bug 16238: Use .prop() instead of .attr() for 'checked'
According to https://jquery.com/upgrade-guide/1.9/#attr-versus-prop-
.attr() is no longer correct to access the checked state of a checkbox.
This patch do the following replacements:
.attr('checked') => .prop('checked')
.attr('checked, '') => .prop('checked', false)
.attr('checked, 'checked') => .prop('checked', true)
.attr('checked', boolValue) => .prop('checked', boolValue)
.removeAttr('checked') => .prop('checked', false)
.attr('checked') == 'checked' => .is(':checked')
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
1) Temporarily include the follwing lines in syspref IntranetSlipPrinterJS:
function printThenClose() {
if (typeof jQuery != 'undefined') {
// jQuery is loaded => print the version
alert(jQuery.fn.jquery);
}
else {
alert('jQuery not available');
}
}
2) Go to a users page and print slips:
From the Print button in the tool bar:
- Print summary
- Print slip
- Print quick slip
From the "Fines" tab: Account
- 'Print' link in the table with paid transactions
Without patch, a JavaScript message 'jQuery not avaliable' appears.
With patch, the message displays the current jQuery version (1.7.2)
3) Remove IntranetSlipPrinterJS
- Verify that the slips above print as expected.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Thu, 7 Apr 2016 15:50:52 +0000 (17:50 +0200)]
Bug 16211: Missing </th> tag in member.tt line 392
This patch fixes the </th> tag in member.tt line 392
To test:
- Apply patch
- Verify that closing th tag on line 392 is OK
- Go to /cgi-bin/koha/members/member.pl, do a search and verify that
results display as expected
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 30 Mar 2016 08:27:23 +0000 (09:27 +0100)]
Bug 16167: Remove Authorised value images prefs
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Apr 2016 07:39:57 +0000 (08:39 +0100)]
Bug 16167: Atomic update
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 9 Mar 2016 14:16:18 +0000 (09:16 -0500)]
Bug 16080 [Revised] Remove unused images from the staff client
This patch removes images from the staff client templates which are no
longer used.
To test you must (as of 2016-04-22) apply the patch for Bug 16241.
Apply the patch and search for references in the Koha code to
the removed images. You should find none.
The staff client CSS file has been updated to remove obsolete references
to image files. These old styles were made obsolete by the switch to
Font Awesome icons.
Revision removes reference to glyphicons-halflings-koha.png from
circ/offline-mf.tt
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of Bug 16241
No reference of deleted files (only on PO files but that will be fixed later)
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 25 Apr 2016 12:29:16 +0000 (08:29 -0400)]
Bug 16241: Move staff client CSS out of language directory
This patch corrects CSS paths in three places I missed.
To test, apply this follow-up and:
- View the patron detail page. DataTables should be styled correctly.
- View the tag review page. DataTables should be styled correctly.
- From the tag review page, click any tag to see a list of titles with
that tag. The DataTable on that page should be styled correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 12 Apr 2016 17:21:33 +0000 (13:21 -0400)]
Bug 16241 - Move staff client CSS out of language directory
The staff client CSS is not language-specific, so it can be moved out of
the en/ directory and thus not be duplicated for every translation.
In order to be able to have a generic path to the YUI CSS files, the YUI
directory is moved by this patch to the staff client's lib/ directory.
To test, apply the patch and visit various pages in the staff client.
Look in particular at pages which include more than the standard CSS.
For example:
- The staff client login page.
- The staff client home page.
- Patron -> Set permissions.
- The advanced cataloging editor.
- Acquisitions -> Vendor -> Basket groups.
- Tools -> News -> Edit news.
- Administration -> System preferences.
Revised: I intended for this to be built on top of Bug 15883. Now it is.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of 15883
Works as described, all pages on test plan
No Errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 30 Mar 2016 07:42:12 +0000 (08:42 +0100)]
Bug 16041: Turn off StaffAuthorisedValueImages by default
This feature is enabled by default, but the users are not aware of it
and it costs a lot of time processing to get the images.
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by sysprefs.sql and
does not appear in updatedatabase.pl, we could easily imagine that
nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set.
Otherwise you need to turn the XSLT off. In this case you will see the
images on the result list (OPAC+Staff interfaces) and OPAC detail page,
but not the Staff detail page.
The idea of this patch is to introduce a quick switch if the feature is
not used by the library.
Test plan:
1/ Turn the pref on and set authorised_values.imageurl to NULL
Execute the DB entry
=> The pref have been turned off
2/ Turn the pref on and set an image for an authorised value
Execute the DB entry
You will get a warning
3/ Turn the pref off and set an image for an authorised value
Execute the DB entry
You will get a warning
4/ Turn the pref off and set authorised_values.imageurl to NULL
Execute the DB entry
You won't get a warning
Note that the opac detail page now checks the pref before retrieving the
images.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed update message 'that means'.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Wed, 2 Mar 2016 13:19:03 +0000 (14:19 +0100)]
Bug 15956: New unit test SIP/Message.t
This patch adds a unit test for the handlers of Patron Status
and Patron Info requests. It can be extended with test for the
other handlers later (hopefully).
Note: The tests have been written for SIP protocol version 2.
Test plan:
Run t/db_dependent/SIP/Message.t.
Note: If bug 13871 has not yet been pushed, test 12 (subtest 1) should fail
with something like 'Code AF not found'. Same for test 15 of subtest 2.
That is no problem; after that push, all tests should pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All tests pass
t/db_dependent/SIP/ILS.t .......... ok
t/db_dependent/SIP/Message.t ...... ok
t/db_dependent/SIP/Patron.t ....... ok
t/db_dependent/SIP/Transaction.t .. ok
All tests successful.
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Wed, 2 Mar 2016 13:33:27 +0000 (14:33 +0100)]
Bug 15956: Move SIPILS.t to SIP/ILS.t
Move the file. Some trivial (cosmetic) edits: whitespace, comments.
Test plan:
Run SIP/ILS.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Wed, 2 Mar 2016 13:20:59 +0000 (14:20 +0100)]
Bug 15956: Remove warn from handle_patron_status
Removes a warn and some commented warns.
Test plan:
Nothing to do here. Will be covered later by additional unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Sun, 28 Feb 2016 13:13:45 +0000 (14:13 +0100)]
Bug 15956: Rearranging some SIP unit tests
The original SIP_ILS.t is split up into SIP/Patron.t and
SIP/Transaction.t.
The assumption on a hardcoded existing and non-existing card number is
replaced by adding and deleting a card number (:patron) with TestBuilder.
Test plan:
Run SIP/Patron.t
Run SIP/Transaction.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 19 Feb 2016 16:13:50 +0000 (16:13 +0000)]
Bug 15863: Show/hide date range selection if not needed - dictionnary
When creating a dictionary for a date column, there is a "date range" /
"all dates" radio buttons and 2 inputs to select the date range. These
inputs should be hidden if "all dates" is selected.
Test plan:
1/ Create a new dictionary on reports/dictionary.pl
2/ Select a date column (borrowers.dateofbirth of instance)
3/ On step 4, the start/end of the date range inputs should be
hidden/shown depending of the radio buttons.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 25 Feb 2016 19:41:11 +0000 (14:41 -0500)]
Bug 15918 - Obsolete file datatables-strings.inc can be removed
The include file datatables-strings.inc is no longer necessary. Its
contents are now in datatables.inc. This patch corrects two references
in comments to datatables-strings.inc (replacing it with datatables.inc)
and removes the obsolete file.
To test, apply the patch and load any page with a DataTables-enabled
table configured to show pagination buttons, e.g. Saved Reports.
Pagination labels like "Next," "Previous," and "Showing X of X..."
should be correct.
Search the codebase to confirm that no references remain for
datatables-strings.inc.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 29 Feb 2016 16:53:14 +0000 (11:53 -0500)]
Bug 15938 - Use validation plugin when adding or editing classification sources and filing rules
In Administration -> Classification sources there is some embedded
JavaScript which checks for empty form values. This patch removes that
JS and adds validation using the globally-included validation plugin
instead.
To test, apply the patch and go to Administration -> Classification
sources.
- Click to add a new classification source and confirm that you cannot
submit the form with empty required values.
- Edit an existing classification source and confirm that you cannot
empty a required field and submit the form.
- Repeat the previous two steps with filing rules.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
David Cook [Tue, 12 Jan 2016 04:17:35 +0000 (15:17 +1100)]
Bug 15555: Index 024$a into Identifier-other:u url register when source $2 is uri
This patch indexes 024$a into the "phrase" index type, and the "url" index type,
if the 024$2 equals "uri".
TEST PLAN
1) Apply the patch.
1b) If you're using a gitified Koha or a git install,
you'll need to upgrade your instance or copy your zebradb files
over to /etc/koha/zebradb or your "kohadev" directory.
2) Add a 024$a with a URL like http://libris.kb.se/resource/bib/219553
to a bibliographic record
3) Re-index Zebra
4) Type "id-other,st-urx,fuzzy=http://libris.kb.se/resource/bib/219553"
into the "Search the catalog" box in the Staff Client and search
5) Note that you retrieve your record
NOTE: The fuzzy is required because Koha's query "parsing" functions change
http:// to http=// which won't correctly match the value in the "Identifier-other:u" index.
NOTE: Alternatively, you could do the following search instead:
"id-other,phr=http libris kb se resource bib 219553".
It would work as well by using the "Identifier-other:p" index.
Advanced tester version:
4) In a terminal window, find the "koha-conf.xml" file in your "etc" directory.
5) Open "koha-conf.xml" and find <listen id="biblioserver">.
Copy the URI you find there. (e.g. unix:/home/dcook/koha-dev/var/run/zebradb/bibliosocket).
6) Type "yaz-client unix:/home/dcook/koha-dev/var/run/zebradb/bibliosocket"
7) After it connects, type "base biblios" and press enter
8) Type "format xml" and press enter
9) Type "elements zebra::index" and press enter
10) Type "f id-other,st-urx=http://libris.kb.se/resource/bib/219553" and press enter
11) Note that you should have at least one result
12) Type "show 1"
13) If you scroll through the results, you should find something like the following:
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised the record is retrieved
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Some of the statements in the commit message do not work for me.
A search like "id-other,phr=http libris kb se resource bib 219553" does not
have results. Searching for "id-other,phr=libris.kb.se resource" does.
The steps in the advanced tester version do not work for me too.
I verified the following in yaz-client:
[1] Z> f @attr 1=9012 @attr 4=104 http://libris.kb.se/resource/bib/219553
Sent searchRequest.
Received SearchResponse.
Search was a success.
Number of hits: 1, setno 16
[2] First removed $2 and reindexed. Then searched again:
Z> f @attr 1=9012 @attr 4=104 http://libris.kb.se/resource/bib/219553
Sent searchRequest.
Received SearchResponse.
Search was a success.
Number of hits: 0, setno 1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Mon, 11 Jan 2016 23:07:33 +0000 (16:07 -0700)]
Bug 15531: (QA followup) Fix several small issues
* Add `AFTER` to DB update
* Change "Is standing order basket:" to "Orders are standing:"
* Disable item creation when adding from a staged file
* Correctly show is_standing for existing baskets
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Mon, 11 Jan 2016 23:07:33 +0000 (16:07 -0700)]
Bug 15531: Add support for standing orders
This allows creation of special baskets that include standing orders.
These orders do not have a known quantity (and may not have a known
price in advance). Upon receipt, the received items are split into a new
completed order.
Test plan:
1) Run updatedatabase.pl.
2) Run prove t/db_dependent/Acquisition/StandingOrders.t . (and the
other Acquisition tests).
3) Create a new basket, mark it as a standing order basket.
4) Add an order to this basket, and notice that the quantity field is
missing (and thus not required).
5) Receive items for this order, and notice that the original order is
unchanged. The new child order line should have the correct price
and quantity information.
(Note: the QA tools output what seems to be a spurious spelling error
for Test::More's "isnt" in StandingOrders.t.)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15303 Followup: If install LE dependencies from backports on Jessie
On Debian Jessie, apt needs to be told it should get the dependencies
for the LE package from backports, or it will error. We check if we are
on Jessie and do that automatically so users don't need to set priorities
manually in apt.
Changed to lsb_release -c -s.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mirko Tietgen [Sat, 16 Jan 2016 23:15:30 +0000 (00:15 +0100)]
Bug 15303 LE production server
Deletes the --staging option of the letsencrypt command to get
real certificates. Rate limits apply.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mirko Tietgen [Fri, 4 Dec 2015 00:11:17 +0000 (01:11 +0100)]
Bug 15303 Letsencrypt option for Debian package installations
New option koha-create --letsencrypt
- installs the letsencrypt package if needed
- creates <instance>
- generates letsencrypt certificates for <instance>
- sets up a https-only website for <instance>
- redirects http to https for <instance>
! you need to enable jessie backports to install letsencrypt: add
deb http://http.debian.net/debian jessie-backports main contrib non-free
to your /etc/apt/sources.list
! this patch uses the letsencrypt staging server
to create real certificates, apply thy "LE production server" patch
Test plan:
- build a debian package with patch applied
- use apache mod_ssl
sudo a2enmod ssl
- make sure the machine is accessible on 80 (needed for letsencrypt) and 443 from the internet
- install koha with your new package
- Put your (existing) domain options in /etc/koha/koha-sites.conf
- use koha-create with the new options:
sudo koha-create --create-db --letsencrypt <instance>
- if you do not have the letsencrypt package installed, you will be prompted to do that
[
if there is no package available, a symlink to the git checkout will work:
on your test server, get letsencrypt via git
git clone https://github.com/letsencrypt/letsencrypt
create a symlink from /usr/bin/letsencrypt to letsencrypt-auto
sudo ln -s /path/to/letsencrypt/letsencrypt-auto /usr/bin/letsencrypt
]
- wait until setup is finished, check that you got a working OPAC and staff client with certificates
- check that http redirects to https
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 18 Apr 2016 09:37:18 +0000 (10:37 +0100)]
Bug 15009: QA follow-up
This patch adds a test to check the unicity of auth cats, simplify
the GetBudgetAuthCats subroutine and make it return an arrayref of scalar
instead of an arrayref of hashref with only 1 key.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
charles [Fri, 25 Mar 2016 21:09:24 +0000 (17:09 -0400)]
Bug 15009 - Adds unit tests for C4::Budget::GetBudgetAuthCats
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Blou [Tue, 13 Oct 2015 20:12:49 +0000 (16:12 -0400)]
Bug 15009 - Planning dropdown button in aqbudget can have empty line
When displaying a budget, the Planning button in the admin toolbar displays
Plan by months
Plan by libraries
Plan by item types
Plan by
The last one is empty, due to C4::Budgets::GetBudgetAuthCats returning an empty field if the budget has no sort defined.
This prevents returning an array with empty element(s)
TEST:
1) Admin -> Budgets
2) Select a budget
a) you must have '' (empty) in your aqbudgets.sort1_authcat field.
b) edit the budget (direct DB or interface) to get that.
3) Click on Planning dropdown, see the "Plan by <nothing> " entry.
4) apply the patch, revalidate.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more empty option
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug #14377 Show "BIBNO - Suppressed in OPAC" for records with 942$n=1.
Includes class="suppressed_opac" for library specific styles.
Suggested css: .suppressed_opac { color:red; font-size:1.25em; font-weight:bold; float:right; margin-right:2em; clear:none; }
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Tue, 5 Apr 2016 15:52:22 +0000 (11:52 -0400)]
Bug 14305: RSS message correction follow-up
If a user is not logged in but requests a specific branch,
the RSS feed message fails to mention the branch.
TEST PLAN
---------
1) Apply first patch
2) go to OPAC's opac-main.pl?branch={some branch with specific news}
-- notice bad RSS message
3) Apply this patch
4) Repeat step 2
-- notice branch is properly shown.
5) koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Persson [Wed, 5 Aug 2015 14:16:50 +0000 (16:16 +0200)]
Bug 14305: View arbitrary branch's news
This patch adds an input named 'branch' to opac-main.pl that
allows overriding the home library to view news from any branch.
This is part of the 'Use Koha as a CMS' development.
To reviewers: Does this create any security implications?
The column is text; it is possbile to push SQL
statemens into the DB via the opac-membership.pl
page, but all the code there seems to use DBIx::Class
and prepared statements. When attemped, accepting the
changes were rejected because of the foreign key
constraint placed on the main borrowers table.
It is recommended to use this patch in conjunction with 11584
which adds a WYSIWYG editor to System Preferences.
Test plan:
* Make sure your Koha installation has multiple branches:
* Log in to the Staff interface and select 'Koha administration'
* Select 'Libraries and groups', the first item in the list
* Add an extra branch named 'BRANCH1':
* Press the 'New library' button
* Set 'Library code' to 'BRANCH1'
* Enter an arbitrary name
* Press 'Submit'
* Add at least two news items with different branches:
* Log in to the Staff interface and select 'Tools'
* Under 'Additional tools' select 'News'
* On the 'Koha news' page, create a news item for all libraries:
* Press the 'New entry' button
* Set 'Library' to 'All libraries' and enter a title.
* Press 'Submit'
* On the 'Koha news' page, create a news item for one library:
* Press the 'New entry' button
* Set 'Library' to 'BRANCH1' and enter a title
* Press 'Submit'
* Add links to OPAC to select branch:
* Select 'System preferences' and then the 'OPAC' tab
* Scroll down to the 'OpacNav' preference and click 'Click to Edit'
* Create two hyperlinks with a parameter named 'branch':
* '<a href="?branch=BRANCH1">BRANCH1</a>'
* '<a href="?branch=">none</a>'
* Click 'Save all OPAC preferences'
* Test OPAC:
* By default, global news and news for home branch should show.
* When clicking the 'BRANCH1' link, you should see global news
plus news for the BRANCH1 branch.
* When the parameter 'branch' is set but has no value,
news from the home branch should be shown.
Issues: Tricky to create a link to the same page
which removes existing paramters.
The user normally has a home branch set.
We can override it with the parameter.
If undefined, the home branch should be shown.
Sponsored-by: Halland County Library
http://bugs.koha-community.org/show_bug.cgi?id=14305
Changed 2015-12-14: Whitespace fix
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Persson [Tue, 18 Aug 2015 21:03:54 +0000 (23:03 +0200)]
Bug 14305: View arbitrary branch's news, RSS fix
This fix changes the RSS link to reflect the URL paramter override.
This is less elegant than the existing solution which uses the
Branches TT module, perhaps there is a better way?
Sponsored-By: Halland County Library
Test plan:
* Follow instructions in the original patch but also check the
URLs and contents of the RSS link at the bottom the OPAC page.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 4 Apr 2016 22:59:33 +0000 (18:59 -0400)]
Bug 14144: Clean ups and refactors
perltidy
old new calls to new call format
attrType -> attr_type (perlcritic friendlier)
double quotes to single quotes
'' combinations to q{} (perlcritic friendlier)
refactored parameters to mock_net_ldap_search into a HASH
This piece is not necessary, but I think it is nicer.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected. No koha-qa erros
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Revisiting this bug, I noticed that C4::Context->config() was mocked
poorly. I expanded the mock function a little and have quieted the
test which seemed to be working in a broken manner before.
TEST PLAN
---------
1) prove t/db_dependend/Auth_with_ldap.t
-- shibboleth noise
2) apply this patch
3) prove t/db_dependend/Auth_with_ldap.t
-- no noise
4) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Mon, 25 Apr 2016 13:02:36 +0000 (15:02 +0200)]
Bug 14050: Default framework for authorities should not be deletable
To test:
- Apply patch
- In staff client, go to Home > Administration > Authority types
- Verify that the Actions for the Default type do not contain the delete
action
- Verify that other types have a delete action
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Delete action was eliminated
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bouzid Fergani [Thu, 5 Mar 2015 15:56:14 +0000 (10:56 -0500)]
Bug 11371 - Add a new report : Orders by fund with more options
Add option show or no inactive budget and more options
Use subroutine GetBudgetHierarchy for return all budgets
Delete subroutine GetBudgetPeriodDescription and theire tests
Use Price TT plugin
Correct name of column and capitalization the first letter
Add checkbox for show inactive budgets, default the drop down list containt a active budget
Not use [i] for inactive budgets, i add (inactive) at the end of inactive budget
Add vendor note in the list of show attribute
Test case:
Go to Home > Reports > Orders by fund
Select one or all budgets
You can show the inactive budget, default the drop down list containt a active budget
Choose output to screen ou csv file
Works as expected. QA tools OK with Bug 16104 applied. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- changed 'Fund (budget):' back to 'Fund:', as the budget
no longer shows in the pull down.
- Fixed number of tests in Budgets.t
- Removed &GetBudgetPeriodDescription
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 6 Apr 2016 14:54:48 +0000 (10:54 -0400)]
Bug 9387 - Feedback message for FAILED check out items are not obvious for visually impaired
This patch adds a heading to the error dialg displayed when a barcode
has been submitted for checkout which doesn't exist. This patch also
modifies the markup of the error dialog in order to make error a little
more clear to sighted users.
To test, apply the patch and submit a barcode for checkout which does
not exist. The resulting error dialog should have a heading, "Barcode
not found."
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 6 Jul 2015 13:43:34 +0000 (09:43 -0400)]
Bug 14497 - Add warning to patron details page if patron's fines exceed noissuescharge
Some librarians have requested that the same warning on the check out
page be placed on the patron details page if a patron's fines exceed the
system preference noissuescharge.
Test Plan:
1) Apply this patch
2) Find or create a patron who's fines exceed noissuescharge
3) Browse to that patron's details ( moremember.pl )
4) You should see a warning near the top of the page with links to the
patron's account page and the pay fines page
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Patch ammended post sign-off
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 22 Mar 2016 13:04:25 +0000 (09:04 -0400)]
Bug 11565 [QA Followup] - Hide checkout options when not in use
This follow-up reformats the checkout screen so that checkout settings
like specify due date, on-site checkout, and override high holds are
grouped in a panel which is hidden by default. Clicking a link shows all
the available settings.
Also modified in this patch: The default color for div.hint has been
made a little darker for readability.
To test, apply the patch and clear your browser cache if necessary.
- Check out to a patron who is not blocked from checking out.
- Click the "Checkout settings" link and confirm that the settings panel
is displayed.
- Test that the settings in the panel behave as expected.
- Test with preferences on and off: decreaseLoanHighHolds,
OnSiteCheckouts, SpecifyDueDate.
NOTE: This patch is a work in progress. It does not address the issue of
checkout setting being hidden even if they are active.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Sep 2015 15:48:14 +0000 (11:48 -0400)]
Bug 11565 - decreaseLoanHighHolds needs Override
This patch allows the high holds loan length decrease to be overridden
either by a checkbox that remembers its setting during a series of
checkouts, or by a one time use override checkbox that will show
in the warning popup if a checkout is affected by high holds.
Test Plan:
1) Set up a checkout that will be affected by decreaseLoanHighHolds
2) Attempt to check out an item
3) Check the override checkbox
4) Note the checkout date is not reduced
5) Return the item
6) Start a new checkout for the patron
7) Check the "Don't decrease lean length based on holds" checkbox
8) Check out the item
9) Note you are not warned about the high holds decrease
and that the checkout length is not reduced
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 18 Dec 2012 15:55:25 +0000 (10:55 -0500)]
Bug 16283 - Make OPAC registration captcha case insensitive
The OPAC registration captcha should not be case sensitive. This patch
was moved here from bug 9393.
Test Plan:
1) Enable patron self registration
2) Test the captcha by typing in the captcha in lower case. Registration
should still succeed.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Thu, 11 Feb 2016 01:23:09 +0000 (01:23 +0000)]
Bug 14577 - Allow restriction of checkouts based on fines of guarantor's guarantees
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 18 Dec 2012 19:18:16 +0000 (14:18 -0500)]
Bug 9393 - Add note to circulation.pl if borrower has pending modifications
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
New link "patron modifications" (if there are) on the checkout page.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 5 Nov 2013 16:31:20 +0000 (11:31 -0500)]
Bug 11203 - Datatables in acqusitions do not ignore "stopwords" in titles
Sorting by the "summary" column does not produce the preferred results.
Title beginning with 'a', 'an', or 'the' are sorted using those
articles.
Test plan:
1) Place an order for 2 items with the titles "Alpha" and "The Alpha",
along with some other records with titles starting with something
between 'a' and 't', and 't' and 'z'
2) Sort the "pending orders" table, note the incorrect sorting
3) Receive all the items
4) Sort the "already received" table, note the incorrect sorting
5) Apply the patch
6) Repeat steps 1-4, note the corrected sorting
7) Check acqui/basket.pl for correct sorting
8) Check acqui/invoice.pl for correct sorting
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12333: Acquisitions toolbar and removing Add to basket section at bottom
To test:
1) Go to Acqui -> do a vendor search -> view a basket
2) Confirm that the Add Order to basket section at the bottom is gone.
Confirm the add to basket button in the toolbar still works as
expected
3) Confirm that when you make your browser shorter, the toolbar follows
the page down as you scroll
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log