Bug 8921: make koha-common*.deb depend on cron-daemon
Trivial patch to add 'cron-daemon' as dependency for the koha-common
package. 'cron' is usually pulled in any minimal Ubuntu/Debian
install, but in some circumstances (using debootstrap) it might be
absent.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No entry in debian/control yet, but
according to comments in the file this file is generated
from control.in - so this should be ok.
Jonathan Druart [Tue, 24 Dec 2013 08:58:38 +0000 (09:58 +0100)]
Bug 10138: (follow-up) FIX sql errors
There were 2 INSERT in error.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have gone ahead and fixed the typo pointed out by Mathieu:
Endommadgé-> Endommagé
Sample files install without problems, tests look good.
Bug 10138: Add some authorized values in French installer; small fixes in frameworks
This patch adds some categories of values in French installer :
- SUGGEST
- OPAC_SUG
- REPORT_GROUP
- LOST
- DAMAGED
SUGGEST and OPAC_SUG are used by Suggestions module.
REPORT_GROUP is used by Reports module.
It also adds a new status for "ETAT" (en commande)
It creates a 995$2 subfield in french frameworks when it did not exist.
It links existing 995$2 subfield with LOST category.
It cleans up the list of authorised values installed with "Lecture
publique" framework :
- some codes are moved in general 1-Obligatoire/authorised_values.sql
(SUGGEST, REPORT_GROUP)
- some are suppressed, because they are also defined in
1-Obligatoire/authorised_values.sql (langue, COUNTRY, statut)
- the code for inserting the ones left is changed (I suppress the `id`
column)
To test :
1. Take a fresh new Koha
2. Install Koha choosing French installer and UNIMARC Lecture publique
3. Check the authorised values are imported
4. Check the cataloguing frameworks are usable :
especially 995 $2 field, which must be mapped with LOST values :
Perdu, Long retard, Perdu et remboursé, Introuvable
you can also check 101$a (language codes), 102$a (country codes)
5. In OPAC, make a suggestion. See if you can select a cause for your
suggestion ("Bestseller" or "'L'exemplaire en rayon est endommagé")
6. In staff interface, manage some suggestions. See if you can select a
cause for rejection or acceptation ("Bestseller", "Budget
insuffisant" etc)
7. In reports, see if you can sort reports according to values of
REPORT_GROUP ("Circulation", "Catalogue", "Adhérents" etc)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Bug 8018: (followup) make the default more explicit
This patch:
- Makes the new subfield tab show maxlength=9999 as default (instead of
empty-then-zero).
- Updates the help to make exlpicit that 0 or empty defaults to 9999.
- Assumes all the subfields created with maxlength=0 inadvertedly are
meant to mean "no limit" and hence update the database to reflect
that.
To test (this patch and Pablo's):
- Edit a MARC framework, edit some field's subfields.
- Use the 'New' tab to create a new subfield (choose an unused letter).
- See in "More constrains" that the "Max length" field is empty. Leave
it as-is.
- Save the changes (the new subfield).
- Edit the field again, verify that "Max length" is 0.
- Try tu use the framework and the the field/subfield just created
> FAIL
- Apply the patches, upgrade
- Try to use the framework/field/subfield > SUCCESS (0 was converted to
9999)
- Repeat from the begining, "Max length" should show 9999 on the new
subfield tab.
- Leave it empty, it is saved as 9999.
Edit: small typo
Sponsored-by: Universidad Nacionald de Cordoba Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests in t and xt.
Tested:
- deleting an existing subfield
- adding a new subfield with new default 9999
- editing the new subfield, changing value to 8888
- deleting new subfield
- adding new subfield, using 8888 as length
Pablo Bianchi [Wed, 11 Dec 2013 18:54:54 +0000 (15:54 -0300)]
Bug 8018: MARC framework max subfield length should default to 9999
The default value for the marc_subfield_structure.maxlenght is 9999
in the DB. Currently the template passes an empty value which is casted to
0 by the CGI.
This simple patch validates the input and converts to the default (9999)
if not defined or 0.
Another approach could be changing the 9999 default and/or treating 0 as
'no-limit'.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works by defaulting 0 or "" to 9999.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 18 Dec 2013 19:44:53 +0000 (14:44 -0500)]
Bug 11419: display Z39.50 search errors more completely
When a z39.50 server isn't able to be searched successfully, the yellow
error box came up empty. This patch fixes the problem.
Test Plan:
1) Go to Administration/z39.50 servers
2) Create a fake z39.50 server with a made up address
3) Go to cataloging, search only that server
4) Note the empty yellow alert box
5) Apply this patch
6) Re-run the search, not the alert box has a message in it now
Signed-off-by: Nora Blake <nblake@masslibsystem.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works according to test plan.
When one of the selected servers gives result no dialog
box is shown before and after applying the patch.
Bug 11412: fix potential bulkmarcimport crash when searching for duplicates in authorities
bulkmarcimport.pl can crash when searching for duplicates if the 005
field from the incoming or local record is not defined. This patch
fixes it.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test plan
1/ Create a record with no 005 field
2/ Try to import it checking for duplicates, notice it crashes
3/ Try with a record with a 005 field, but the one in Koha missing
one, still crashes
4/ Apply patch
5/ No more crash
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Patch fixes the problem described for importing authorities
with the bulkmarcimport.pl when trying to match with existing
records.
Kyle M Hall [Fri, 22 Nov 2013 13:31:31 +0000 (08:31 -0500)]
Bug 11282: fix overwriting of existing restrictions when adding new one
This patch fixes a bug where using the patron editor to add a new
restriction overwrote the first existing one.
Test Plan:
1) Edit a patron, add a restriction
2) Edit the patron again, add a second restriction
3) Note the first restriction has disappeared!
4) Apply this patch
5) Edit the patron again, add another restriction
6) Note the previous restriction is not longer removed
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested:
- Adding and removing multiple restrictions from
- the details tab
- the checkouts tab
- the edit patron form
All works as expected.
Patch passes all tests in t, xt, and QA script.
Jonathan Druart [Tue, 24 Dec 2013 13:35:36 +0000 (14:35 +0100)]
Bug 10453: fix unintended password reset when updating child to adult
ModMember supposes the password given in parameter is the
password string, so if it receives the encrypted password,
it will encrypt it again! By simply deleting the password key
from the hash, ModMember leaves the password unchanged.
Test plan:
1/ Create or choose a child patron
2/ Update it to an adult category using the
"Update child to adult patron" link
3/ Try to log in at the OPAC with this patron: It is not
possible, the password has changed
4/ Apply the patch and try again previous steps
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed the problem and tested the patch fixes it.
Passes all tests and QA script.
Galen Charlton [Thu, 14 Nov 2013 18:48:07 +0000 (18:48 +0000)]
Bug 11252: remove deprecated -munge-config switch from rebuild_zebra.pl
The -munge-config switch has been deprecated for years, and
trying to use it would either not work at all or, if it did "work",
almost certainly damage one's Zebra configuration for Koha.
This patch removes this switch.
To test:
[1] Run rebuild_zebra.pl and verify that no mention is made
of -munge-config.
[2] Run rebuild_zebra.pl to index records in one's test database
and verify that there are no regressions.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Removing a really dangerous option
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Ran rebuild_zebra.pl with various options and confirmed
that data was reindexed successfully.
No regressions found.
Fridolyn SOMERS [Wed, 4 Dec 2013 16:05:32 +0000 (17:05 +0100)]
Bug 11338: prevent deletion of items that are captured for holds
In C4::Items::DelItemCheck, there are two SQL queries: one to check
if item is on loan, the other if item is reserved.
Those two queries use "SELECT * FROM table", fetch the data with
"$var = $sth->fetchrow", and use "$var" as a boolean condition.
This is not correct, SQL query should be "SELECT COUNT(*) FROM table".
As a consequence, it was possible to delete an item without warning to
the operator even if it was waiting on the hold shelf or in transit to
fill a hold.
This patch corrects the SQL queries and sets my ($var) to show that
fetchrow returns an array.
Test plan :
- Set an item A onloan
- Set an item B reserved and the reserve waiting
- Go to items cataloguing : cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXX
- Try to delete item A
=> You get an alert and item is not deleted
- Try to delete item B
=> You get an alert and item is not deleted
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works, and has the added bonus of being a tiny bit faster.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes t, xt and QA script tests.
Also tried deleting via batch delete - correct warnings are displayed.
Galen Charlton [Wed, 25 Dec 2013 17:07:53 +0000 (17:07 +0000)]
Bug 11338: add unit tests for DelItemCheck
This patch adds unit tests for two parts of DelItemCheck: checking
if the item is on loan, and checking if it is waiting on the hold
shelf.
To test:
[1] Verify that prove -v t/db_dependent/Circulation/IsItemIssued.t
is successful.
[2] Verify that prove -v t/db_dependent/Reserves.t is *not*
successful -- as it turns out, there was a latent bug where items
waiting on the hold shelf or in transit to fill a hold could still
be deleted without any warning.
This patch makes this code use the value from the marcflavour syspref,
as a preparation for making the NORMARC value builders use the XML
technique employed by the MARC21 value builders for 006 and 008.
To test:
- Make sure you have a MARC21 installation
- Set marcflavour = NORMARC
- Go to Cataloguing and start a new record with the default framework
- Open the value builders for 006 and 008 and observe that they still work, showing
the coded values for MARC21
- Apply this patch
- Check the value builders for 006 and 008 and observe that you get a truncated view
with an empty "Select a type of material" dropdown
- Use e.g. the Net console in Firebug to observe requests to
http://localhost/intranet-tmpl/prog/en/data/normarc_field_008.xml
that result in a 404 status
- Set marcflavour = MARC21
- Observe that the value builders for 006 and 008 are now fully working
- 006 and 008 should be the only value builders affected by this change, since
they are the only ones using xmlControlfield.js, but please also verify that
other value builders are still working as expected
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 25 Dec 2013 15:49:48 +0000 (15:49 +0000)]
Bug 9940: (follow-up) add language-original to QP search field list
This patch adds language-original to the list of search fields
recognized by QueryParser.
To test:
[1] After doing the tests in the main patch, copy the configuration
file etc/searchengine/queryparser.yaml into place, turn on the
UseQueryParser system preference, and verify that searching on
language-original still works.
Bug 9940: Add a new index for the original language of a document
It could be useful to index the original language of a document (i.e.
"fre" for the English translation of a French novel).
This patch renames the Bib-1 use attribute 1095 from
Code-language-original to language-original and uses it to index:
- MARC21 041$h subfield
- UNIMARC 101$c subfield
It adds "language-original" in the list of index in Search.pm.
Test plan :
A. in a MARC21 GRS1 environment
1. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/marc21/biblios/record.abs) from
your source etc/ directory to your main koha etc/ directory
2. Reindex zebra
3. Make some searches, like "language-original:fre"
B. in a MARC21 DOM environment
4. Copy Zebra config files (zebradb/biblios/etc/bib1.att, zebradb/ccl.properties,
marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl) from your source etc/
directory to your main koha etc/ directory
5. Reindex zebra
6. Make some searches, like "language-original:fre"
C. in a UNIMARC GRS1 environment
7. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/unimarc/biblios/record.abs) from
your source etc/ directory to your main koha etc/ directory
8. Reindex zebra
9. Make some searches, like "language-original:fre"
A. in a UNIMARC DOM environment
10. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/unimarc/biblios/biblio-zebra-indexdefs.xsl)
from your source etc/ directory to your main koha etc/ directory
11. Reindex zebra
12. Make some searches, like "language-original:fre"
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Thu, 5 Dec 2013 14:34:44 +0000 (15:34 +0100)]
Bug 6331: (follow-up) update timestamp when deleting items
When item is transfered from items table to deleted items, all fields
must be copies but "timestamp".
This value must be updated to know when the item was deleted.
Test plan:
- Look a an item timestamp :
mysql> select timestamp from items where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2011-09-09 15:30:21 |
+---------------------+
1 row in set (0.00 sec)
- Delete this item in cataloguing module
- Check it is not in items table anymore :
mysql> select timestamp from items where itemnumber = 2690;
Empty set (0.00 sec)
- Look in deleteditems table :
mysql> select timestamp from deleteditems where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2013-12-05 15:33:20 |
+---------------------+
1 row in set (0.00 sec)
=> timestamp as been set to actual date/time
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch set passes koha-qa.pl, works as advertised!
There is a difference between "items" and "deleteditems" tables
in "kohastructure.sql"
"deleteditems" has a field "marc" not existing in "items".
This patch removes this obsolete column.
Test :
- after deleting an item, check that the deleted item is properly
stored in deleteditems table
- check that the column marc has been deleted from deleteditems table
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 13 Dec 2013 01:11:06 +0000 (01:11 +0000)]
Bug 11391: (follow-up) update DBIC schema classes
This patch updates the DBIC schema class for Suggestion
to reflect the dropped default value for the suggesteddate
column.
To test:
[1] Create an empty Pg database and use the deployment script
being worked in in bug 11390. The deployment shoudl
succeed without reporting any errors regarding the
suggestions table.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 13 Dec 2013 01:06:12 +0000 (01:06 +0000)]
Bug 11391: drop default value on suggestions.suggesteddate column
The 'default 0' clause got translated as an invalid constant
default of '0000-00-00' when DBIx::Schema is used to deploy
the suggestions table into a Pg database. This patch drops
the default.
To test:
[1] Apply the patch and run the SQL specified in the database
updated.
[2] Verify that the suggestions table no longer has an
explicit default value for the suggesteddate column.
[3] Verify that prove -v t/db_dependent/Suggestions.t
passes.
[4] Verify that installer/data/mysql/kohastructure.sql runs
cleanly in an empty database.
[5] Verify that there are no visible regressions of the
purchase suggestions functionality.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Having a default of 0 on a date seems like a mad thing to do anyway,
so good to get rid of it
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 11 Dec 2013 16:55:31 +0000 (16:55 +0000)]
Bug 11384: (follow-up) update DBIC schema classes
This patch updates the DBIC schema class for CollectionTracking
to reflect the new name of its primary key column.
To test:
The CollectionTracking class is not currently used, but
if you *really* want to test this, take a look at the following
branch: http://git.librarypolice.com/?p=koha-galen.git;a=shortlog;h=refs/heads/pg
Then, set up a PostgreSQL database, update koha-conf.xml to point to it,
then run pg/deploy and verify that the collections_tracking table is created
in the Pg database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 11 Dec 2013 16:49:01 +0000 (16:49 +0000)]
Bug 11384: rename the collections_tracking.ctId column
'ctId' as a column name conflicts with one of the system
columns that PostgreSQL uses for each table, and consequently
needs to be renamed to enable deploying the schema to a Pg
database. This patch makes this change.
To test:
[1] Apply the patch and run the SQL specified in the database
updated.
[2] Verify that the collections_tracking table no longer has
a ctId column, but now has collections_tracking_id.
[3] Verify that prove -v t/db_dependent/RotatingCollections.t
passes.
[4] Verify that installer/data/mysql/kohastructure.sql runs
cleanly in an empty database.
This patch does not affect user-visible behavior given the fact
that the rotating collections feature is currently disabled.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 13 Dec 2013 01:29:09 +0000 (01:29 +0000)]
Bug 11155: remove old PostgreSQL schema and MARC framework scripts
This patch removes the legacy Pg schema and MARC framework scripts
as they're out of date. They will be replaced by use of DBIx::Class
to deploy the schema. Loading the sample data and settings will be
accomplished either by making the current scripts in installer/data/mysql
DBMS-independent (or, at least, able to be processed by both MySQL and Pg),
converting them to flat text files and writing code to load them, or a
combination of the two approaches.
To test:
[1] Verify that installer/data/Pg is removed. There is some code
in C4::Installer that refers to that directory, but it cannot
be reached through normal means.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 18 Dec 2013 11:18:52 +0000 (12:18 +0100)]
Bug 11414: warn user about dangerous MARC modification rules
Test plan:
On the MARC modification tool:
Add/edit a new action on a field and define a condition on the same
field.
Verify that you get a warning message in red.
See bug 11413 for more information
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested adding and editing a template with the same field in the
action and the condition.
Jacek Ablewicz [Sat, 14 Dec 2013 11:07:11 +0000 (12:07 +0100)]
Bug 9948: fix creation/updating of items when partially receiving an order
Problem summary: when doing partial receives for the given order -
1) if AcqCreateItem is set to 'ordering', various item data (price,
dateaccessioned, replacementprice, replacementpricedate) are getting
erroneously updated on the wrong (yet to be received == not the ones
being currently received) item records
2) if AcqCreateItem is set to 'receiving', newly received
item records are being created without the aforementioned fields
set to the proper values
This (trivial) patch should deal with both cases, hopefully without
breaking enything else.
To test:
- apply the patch,
- create some orders with 2+ quantity
- test partial & non-partial receives for those orders
- ensure the received item records are getting modified
(for AcqCreateItem set to 'ordering') and/or created (for AcqCreateItem
set to 'receiving') correctly for both partial and non-partial receives
- receiving orders with quantity = 1 / receiving orders in non-partial
mode should be still working fine for 1) & 2) scenarios (i.e.,
AcqCreateItem set to 'ordering' / AcqCreateItem set to 'receiving')
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Works as I'd expect now! Awesome patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also: t/db_dependent/Acquisition/
t/db_dependent/Acquisition.t
Created 2 orders with 3 items each for both settings
of AcqCreateItem (on receive, on order) with the patches
applied. No regressions found.
Closed baskets and received shipments for each, with
AcqCreateItem set according to how the order was created.
First recreated the problem without the patches, reloaded
database and confirmed that the patch fixes it.
Robin Sheat [Tue, 19 Nov 2013 02:26:02 +0000 (15:26 +1300)]
Bug 10735: prevent koha-dump from aborting if backupdir undefined
Older versions of Koha didn't have <backupdir>...</backupdir> defined in
koha-conf.xml. The koha-dump script is aware of this, and checks to see
if it's there. However, if it's not, xmlstarlet returns a non-0 error
code which causes the script to abort due to running under set -e.
Test plan:
* Remove backupdir from koha-conf.xml
* Run koha-dump, notice that it doesn't do backups
* Apply patch
* Run koha-dump again, notice that it does do backups
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fallback method works as described. It might be made more robust
like checking for dir existence (thinking of older instances upgrades).
But it certainly belongs to another bug report.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
As Tomas said, it would be better to alert the user if the backupdir tag
does not exist (or contains a nonexistent directory) in the config file.
Bug 10905: fix links to author tracings when UseAuthoritiesForTracings is on
Quotation marks in MARC21slim2OPACDetail.xsl break author tracings in
OPAC. This patch fixes that for the prog theme; the Bootstrap theme
is not affected.
To reproduce:
- Enable UseAuthoritiesForTracings
- Search in the OPAC and go to the detail page of a record that has
links to authorities.
- Click on the magnifier icon
- You get a 404 error page.
To test the fix:
- Apply the patch
- Search in the OPAC and go to the detail page of a record that has
links to authorities.
- Click on the magnifier icon
- You are sent to the corresponding authority record.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: David Noe <drnoe@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, trivial change
Katrin Fischer [Wed, 4 Dec 2013 14:41:39 +0000 (15:41 +0100)]
Bug 10797: Move styling of simple search from element to CSS file
This patch moves the styling of the #transl1 element from an
inline style attribute to the CSS file to make it easier to
tweak.
To test:
- Switch to prog theme, problem doesn't exist in Bootstrap theme
- Take a look at the simple search input field
- Apply patch
- Refresh page
- Make sure field has the same length and size
You can also use Firebug to make sure the same styles
are applied to the element before and after the change.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 17 Dec 2013 21:04:10 +0000 (16:04 -0500)]
Bug 11410: ensure cataloging search finds results for searches with ampersands
When QueryParser is off, the cataloging search is passing the incorrect
variable to SimpleSearch. I'm sure this is causing other issues, but
the one I have identified is that any searches with an "&" in them
return no results. This patch corrects the bug.
Test Plan:
1) Catalog a new record titled "Cats & Dogs"
2) Rebuild your zebra index so this record is indexed
3) Browse to cataloguing/addbooks.pl
4) Search for "Cats & Dogs"
5) Notice you get no results
6) Apply this patch
7) Repeat the search
8) Notice your result now shows up!
Signed-off-by: Heather Braum <hbraum@nekls.org> Signed-off-by: Suzanne Fayle <sfayle@roseman.edu> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, passes all tests and QA script.
Note: Because $query = $builtquery when the QueryParser is used,
this problem is only visible when UseQueryParser is set to "Don't try".
Nicole C. Engard [Sat, 14 Dec 2013 18:34:00 +0000 (12:34 -0600)]
Bug 11383: Add help file for MARC modification templates
This patch adds the missing help files to the MARC modification
templates tool. To test:
* Visit Tools > Marc modification templates
* Click 'Help' in the top right
* Confirm that help is there and right
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Wed, 30 Oct 2013 09:28:49 +0000 (10:28 +0100)]
Bug 11166: make library filter in funds administration page more precise
In funds administration, admin/aqbudgets.pl, there is a combobox for
filtering by library code.
The bug is that the filter uses a pattern match instead of equals :
next unless $budget->{budget_branchcode} =~ m/$filter_budgetbranch/;
In this case, if there is a library with code '1' and one with code '12',
filtering by library '1' will also show funds of library '12'.
Test plan :
- Create a library with code '1' and one with code '12'
- Create funds in both libraries
- Go to admin/aqbudgets.pl
- Filter by branch '12'
=> You see only funds of this library
- Filter by branch '1'
=> You see only funds of this library
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Kyle M Hall [Tue, 27 Aug 2013 17:12:11 +0000 (13:12 -0400)]
Bug 10626: (follow-up) replace an instance of KohaAuthorisedValues
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Trying to write my own test plan here:
1) AllowNotForLoanOverride = Allow
Mark single item not for loan and try to check it out.
Check item not for loan status shows up correctly in message:
Item is normally not for loan (Staff Collection). Check out anyway?
2) Toggle AllowNotForLoanOverride = Not Allow
Try to check out your not for loan item again.
Message has changed, but not for loan status should still show:
Item not for loan (Staff Collection).
3) Check out item that is marked damaged.
Check damaged status shows correctly in list of checkouts.
4) Mark item as lost and check it out.
Check lost status shows up correctly in message:
This item has been lost with a status of "Lange überfällig (Verloren)".
5) Create your own custom SUGGEST_STATUS and check that it shows
up correctly on the suggestion page.
6) Test item status show up correctly on OPAC detail page (lost, not
for loan, damaged, etc). Requires follow-up patch to be applied.
7) Mark a suggestion with your custom status and make sure it shows
up in the patron account in OPAC correctly.
Passes tests and QA script - needs a follow up for item-status-schema-org.inc.
Owen Leonard [Thu, 14 Nov 2013 20:41:02 +0000 (15:41 -0500)]
Bug 11179: (follow-up) apply fix to Boostrap theme
This follow-up applies the same fix to the Bootstrap theme. This patch
also includes the changes to item-status.inc in the Bootstrap theme
which were made to the prog theme in Bug 10820: display item status as
lost if item is both lost and on loan.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Bootstrap theme looking so nice. Also the patch works.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 31 Oct 2013 18:27:30 +0000 (14:27 -0400)]
Bug 11179: make OPAC course details page display status of checked out items correctly
If an item is listed for a course and is checked out, the item will
still show as being available from the course details page which lists
all the items that are part of a course. This is due to the way the
course reserves system handles items and issues separately, while
item-status.inc assumes the due date has been embedded in items.datedue
Test Plan:
1) Create a course
2) Add an item to that course
3) Check the item out to a patron
4) View the course details from the opac
5) Note the status says "Available"
6) Apply this patch
7) Repeat step 4
8) Note the status no longer says "Available"
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Thu, 5 Dec 2013 20:47:25 +0000 (21:47 +0100)]
Bug 11228: Improve hint on patron notification when adding/editing subscriptions
The hint was not quite correct, as it said patrons on the routing list
would be informed, but it's only the patrons that have subscribed to
email notifications in the OPAC who will receive the email when a
new serial issue is received.
To test:
- Add a new subscription, find the hint about patron notification on the form
- Apply patch
- Refresh page
- Verify the new hint text makes sense and is correct
Gaetan Boisson [Wed, 18 Dec 2013 14:19:50 +0000 (15:19 +0100)]
Bug 11417: make sure remove_unused_authorities.pl accepts --test
This patches adds support for the --test option, as well as a
short message telling the user the script is running in test mode.
Test plan :
- Launch the script with -h to see the help
- Launch the script with --test and --aut with an authtypecode
that is used in your instance
- Make sure it does the same thing as launching it with -t
- Launch the script for real and make sure it still works as
expected, deleting unused authorities.
Katrin Fischer [Wed, 11 Dec 2013 23:54:08 +0000 (00:54 +0100)]
Bug 11279: Improve how a new quote of the day is selected
If there is a gap in the id sequence for the quotes table, it
is possible that no new quote will be selected. This will happen
particularly when a lot of the older quotes with low ids have been
deleted.
This patch improves the selection of a new quote.
To test:
- Load sample quotes
- Delete the first half of the quotes.
Note: With 34 quotes, delete the quotes with ids from 1-17
- Activate the QuoteOfTheDay system preference
- Check if a quote is displayed in OPAC
- Reload the page a few times, no quote should be displayed
Note: make sure you don't have a quote with the current
date in your quotes table before running those tests
- Run 'perl t/db_dependent/Koha.t'
Note: requires sample quotes!
- Apply patch
- Reload the OPAC start page
- Verify a quote was now picked
- Run 'perl t/db/dependent/Koha.t' again - all tests should still pass
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Patch modified to use "LIMIT 1 OFFSET ?" rather than "LIMIT ?, 1"; the
latter construction does not work in PostgreSQL.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 20 Feb 2013 14:34:38 +0000 (09:34 -0500)]
Bug 9673 - Track when items are marked as lost or withdrawn
Add date fields to track when an item was marked as lost or withdrawn.
Display those fields on catalogue/moredetail.pl
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a record with items, browse to the 'items' tab ( moredetail.pl )
4) Mark an item as lost, verify the field "Lost on:" displays below
the "Lost status" field with todays date.
5) Mark the item as not lost, verify the field no longer displays
6) Repeat steps 4 and 5 with the Withdrawn field.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Fri, 8 Nov 2013 15:15:33 +0000 (16:15 +0100)]
Bug 9807: (follow-up) reindent basketgroup.tt
Basketgroup.tt is very hard to read. This patch simply reindents it.
No visible changes expected
Regression test :
- check the list of opened and closed basketgroups for a vendor is
displayed properly
- check an individual basketgroup (closed and opened) is displayed
properly
- check you can edit a basketgroup and save changes
- check you can print and export a basketgroup
- check you can close and reopen a basketgroup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Thu, 7 Nov 2013 19:16:40 +0000 (20:16 +0100)]
Bug 9807 : Make it possible to view a basket group without reopening it
This patch make possible to view an individual closed basket group
without reopening it.
- It adds a new "View" button on closed basket group list
- It creates a view for closed basket groups, with 3 buttons (reopen,
print, export)
- It adds a "delete" button on standard "edit" view (for open
basket groups)
To test :
1/ regression test :
- create some empty basket groups
- create some basket groups by closing baskets
- in the list of basket groups closed and opened, check you can use
the buttons that existed before the patch (close and print, delete,
export, print, reopen)
- click on "Edit" to edit a opened basket group : check everything is
like before :
-- change the billing and delivery places,
-- add a note,
-- put some new baskets in the bg,
-- remove baskets from it
-- save it without checking "close" box => it should be saved but kept
open
-- edit it again, and make other some changes (define a freetext
delivery place for example)
-- save it with checking "close" => it should be saved but closed
2/ new feature test
- click on "view" button on top right column of some closed basket group
- check all the displayed informations are correct (places, free place,
note, list of baskets)
- check you can not change anything
- click on "print" button => check a pdf is created
- click on "export" button => check a csv is created
- click on "reopen" button => you should stay on the same basket group, but
it is now open and you can make some changes
- go back to the basket group list of the vendor. Check the reopened bg
is in "open" tab
- click on "edit"
- click on new "delete" button => the bg should be deleted, and you are
redirected to the bg list of the vendor.
Signed-off-by: cedric.vita@dracenie.com <cedric.vita@dracenie.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, t and xt. Works as advertised.
Fridolyn SOMERS [Thu, 7 Mar 2013 15:02:55 +0000 (16:02 +0100)]
Bug 7518: certain searches with quotation marks don't work
Under certain circumstance, a search term without quotation marks
returns the expected results while the same search with a
double quote embedded in it would fail.
Koha should ignore the quotation marks and return results anyway.
This appears when QueryWeightFields syspref is activated (and
QueryAutoTruncate is off), as field weighting builds a complex CCL
query using double quotes around search words. This patch simply
replaces double quotes in search words by a space.
Test plan :
- Set QueryAutoTruncate off (you may also need to set QueryFuzzy to off)
- Set QueryWeightFields off
- Perform a serch on two words where you have results, like : centre "ville
=> you get results
- Set QueryWeightFields on
- Perform same serch
=> you get the same results
Signed-off-by: Leila <koha.aixmarseille@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Tue, 17 Dec 2013 16:32:09 +0000 (16:32 +0000)]
Bug 7518: regression test double-quote in search operand
Under certain circumstances, namely where QueryParser is off,
QueryWeightFields is on, and QueryFuzzy and QueryAutoTruncate are
off, a search with a double-quote embedded in it can fail: for
example
web application
would return results where
web "application
does not.
This patch adds an automated regression test.
To test:
[1] Apply this patch and run prove -v t/db_dependent/Search.t;
two tests should fail.
[2] After applying the main patch that fixes the bug, the
prove -v t/db_dependent/Search.t should succeed.
Fridolyn SOMERS [Thu, 14 Nov 2013 13:29:51 +0000 (14:29 +0100)]
Bug 11249: Add Db indexes on borrowers names
The borrowers search is by default on columns surname, firstname,
othernames and cardnumber.
(See C4::Members::_express_member_find).
Adding DB indexes will really increase the query speed.
This patch adds DB indexes on surname, firstname, othernames (cardnumber
has already an index).
Those indexes must be defined with a size because columns are mediumtext.
Test plan :
Test with mysql client :
mysql> explain select * from borrowers where surname like 'A%';
+----+-------------+-----------+-------+---------------+-------------+---------+------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------+-------+---------------+-------------+---------+------+------+-------------+
| 1 | SIMPLE | borrowers | range | surname_idx | surname_idx | 767 | NULL | 395 | Using where |
+----+-------------+-----------+-------+---------------+-------------+---------+------+------+-------------+
=> key show the index is used
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, changes from updatedatabase and in kohastructure match.
I think deletedborrowers can be left out, as it's not queried when doing
patron searches. Patron deletes still work as expected.
Bug 7934: generate separate PO files for help pages
This patch modifies LangInstaller.pm to enable separation
of translation for Staff UI and Staff Help files.
It's a move that make sense, Help strings accounts for
44% of total word count for Staff, and as stated on
Comment #1, it could enable a different workflow on
translation work.
It's more a hack than an elegant solution, but it works.
Feel free to suggest another approach.
To test:
We need to test complete functionality, i.e. create and update
translation files and install translation, and verify that no
string is missing.
1) Before applying the patch, we need some data from staff file.
Pick your language, say de_DE, and
Only results came from help-top and bottom, and a few "help" on staff strings
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan. Checked various pages in OPAC,
staff and intranet, translation was ok.
Passes QA script and tests.
Frédéric Demians [Tue, 26 Nov 2013 09:16:41 +0000 (10:16 +0100)]
Bug 11277: fix errors with search facet links in Bootstrap theme
This patch fixes the following rwo errors:
1. When selecting 'show more' above a facet, the advanced search page
is displayed.
2. When restricting search on a library facet, all the biblio records
of this library are returned.
The patch fixes the way URL are encoded with TT filter. See:
Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works nicely. Tests done:
- 'More' link on facets redirects to advanced search before applying
the patch. After appyling the link works correctly.
- In my tests, the facet links themselves worked nicely, limiting the
search as expected.
- Availability search works ok for me with patch applied.
- Also made sure to click on some links containing diacritcts (German
umlauts).
Kyle M Hall [Tue, 27 Aug 2013 17:14:12 +0000 (13:14 -0400)]
Bug 10626: (follow-up) replace another use of KohaBranchName
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
To test:
Make sure
- independentbranches is turned on
- Your user doesn't have superlibrarian permission
Then
- Try to check out an item with home and holding branch !=
logged in branch
Kyle M Hall [Tue, 23 Jul 2013 13:52:08 +0000 (09:52 -0400)]
Bug 10626 - Remove doubled up TT plugins - Merge KohaBranchName and Branches
Looking at the TT plugin directory I notice we have some plugins that
seem to do the same thing:
KohaBranchName.pm
Branches.pm
This patch drops KohaBranchName in favor of Branches
Test Plan:
1) Apply this patch
2) View a basket group, note the branch name is displayed
3) View a subscription's details, note the branch name is displayed
4) View suggestions, note the branch names are displayed
5) Return an item that needs transfered, note the branch name is displayed
6) Run 'prove t/db_dependent/Koha_template_plugin_Branches.t'
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested with a branch name with umlauts.
Galen Charlton [Fri, 13 Dec 2013 23:42:26 +0000 (23:42 +0000)]
Bug 8230: (follow-up) repair regression on order search
This patch repairs a regression introduced by the main
patch where it became impossible to search for cancelled
orders from the advanced order search form.
This patch also tweaks the wording on the order status
drop-down on the order search form to clarify that the
default status filter is orders that have any status
except cancelled.
To test:
[1] Before applying this patch, perform an advanced
order search (acqui/histsearch.pl) for orders
with status cancelled. Observe that no hits are returned.
[2] Apply the patch and run the search again. This time,
the cancelled orders should be returned.
Galen Charlton [Fri, 13 Dec 2013 23:04:59 +0000 (23:04 +0000)]
Bug 8230: (follow-up) don't link to basket unless user has appropriate permissions
With this patch, the basket number on the bib details page is linked
to the basket management page only if the staff user has the appropriate
permissions.
To test:
[1] Log in as a user with the acquisition/order_manage permission.
Bring up a bib record that is attached to an order and verify
that the basket number is an active link.
[2] Log in as a user that doesn't have the acquisition/order_manage
permission. Verify that the basket number displayed on the bib
details page is not a hyperlink.
Jonathan Druart [Fri, 18 Oct 2013 13:05:11 +0000 (15:05 +0200)]
Bug 8230: (follow-up) reflect the fact that order statuses are now alphabetic codes
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised. No regressions found.
Jonathan Druart [Wed, 18 Sep 2013 12:30:05 +0000 (14:30 +0200)]
Bug 8230: Display acquisition details on the catalogue detail page
This patch adds a new tab "Acquitition details" on the catalogue detail
page. It provides a list of order made for this biblio.
New system preference:
AcquisitionDetails: Hide/Show the new tab. The default for
new and upgraded installations is to display the new tab.
Test plan:
1/ Apply the patch.
2/ Select the "placing an order" value for the AcqCreateItem pref.
3/ Create a new order with X items.
4/ Go on the catalogue detail page for the selected biblio.
5/ Click on the "Acquisition details" tab and check that your order is
displayed. Itemnumbers are present in the last column. Check that links
are not broken.
6/ Close your basket.
7/ Status become "Ordered"
8/ Receive X-1 items.
9/ Come back on the catalogue detail page. There are 2 orders: 1
complete and 1 partial. The complete one has a receive date.
10/ Receive the last item.
11/ Now you have 2 orders with a complete status.
12/ Cancel the last receipt.
13/ You have 1 ordered and 1 complete (2 items).
14/ Cancel the first receipt.
15/ You have 1 ordered (3 items).
16/ Delete your order
17/ You have 1 deleted order.
18/ Switch the AcqCreateItem pref to "receiving an order"
19/ Do again steps 3 to 17.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This dependency is used in load testing (misc/load_testing/*)
Test plan:
Check if you see the dependency listed on About/Perl modules.
Verify if the version information is correct.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Fri, 6 Dec 2013 10:13:41 +0000 (11:13 +0100)]
Bug 11124: QA Follow-up resolving a warning and three typos
Resolves warning on uninitialized author in split on line 128.
Just adds the same behavior for title on line 129 for completeness.
Fixes typo on occurrences and two other minor typos.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.koha.local/cgi-bin/koha/
--password="root" --user="root"
should produce:
Authentication successful
You cannot use the database administrator account to launch this script
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 15 Nov 2013 10:10:04 +0000 (11:10 +0100)]
Bug 11255: allow "relevance ascending" as a sort option
This patch fixes a problem where if a staff member sets the
*defaultSortField/*defaultSortOrder system preferences to relevance
ascending while QueryParser is enabled, default keyword search
would break -- the query parser config did not declare relevance asc
as a possible "modifier".
Note that setting the sort order to relevance ascending does not
actually make catalog search return results with the least relevant
records showing up first; Zebra does not support such a mode. In other
words, relevance ascending acts exactly the same as relevance descending.
Test plan:
0/ Create some biblio with "history" in the title and
ensure that the QueryParser system preference is enabled.
1/ Define prefs defaultSortField = relevance and defaultSortOrder = asc
2/ Search "history" on the staff interface
3/ Note that no result is returned.
4/ Apply the patch
5/ Verify the queryparser config file in use takes the modification into
account (see the queryparser_config value in your $KOHA_CONF file).
6/ Relaunch the search and verify results are returned
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Wed, 16 Oct 2013 15:31:04 +0000 (17:31 +0200)]
Bug 9224: Make acqui/finishreceive.pl Plack-compatible
Under Plack/mod_perl wrapping, sub update_item() will become a closure,
so after the 1st run it will retain its own private instances of the
following variables: $booksellerid, $datereceived, $unitprice, $rrp,
$biblionumber.
I.e., in case update_item() gets invoked 2nd+ time (inside
the same process, but for different-subsequent receives) it may
incorrectly flag the (old, wrong) biblionumber for Zebra reindexing,
and erronously modify the current item[s] with the previously
used (wrong) values.
This simple patch should make acqui/finishreceive.pl Plack-compatible.
Test plan:
Test patched acqui/finishreceive.pl script (create and receive some
orders w/ items, etc.). Ensure items are gettting added and/or modified
correctly during receiving process.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised, no regressions found.
This patch adds a plugin for field 100 of UNIMARC
authorities.
To test on a UNIMARC site:
1) Apply the patch
2) Edit some authority framework, field 100
3) Link subfield 'a' to unimarc_field_100_authorities.pl
plugin, save
4) Edit or add auth record, click on '...' to bring plugin
5) Modify field 100a
6) Save record
Thanks to Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> for
converting Vitor's original patch to a Git patch and doing
some tidying.
Zeno Tajoli [Wed, 30 Oct 2013 18:36:41 +0000 (19:36 +0100)]
Bug 11174: fix OPAC search links built from authority 5xx fields
In the templates opac-authoritiessearchresultlist of prog and
bootstrap the incorrect parameter 'valuec' is changed to 'value'
To test:
1) Insert an authority record with a 5xx field (on MARC21 or UNIMARC)
2) Index the record
3) Search for the record in using OPAC authorities search.
4) Click one of the "see also" links built from the 5xx field, the link
doesn't work
5) Apply the patch
6) Close the browser
7) Open the opac and select the english interface
8) Redo the search
9) Now the link works
10) To use the patch in others languages you need to regenerate the
templates.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with bootstrap.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Following commit remove the use to valuec:
commit 31f41e2c1db9d8dca82e0249050acb8f906c8164
Bug 8206: Specify index in OPAC authority search
Galen Charlton [Tue, 10 Dec 2013 20:20:37 +0000 (20:20 +0000)]
Bug 11009: (follow-up) tweak wording and remove potential log noise
This patch makes the message that is displayed when attempting to
view circ history for the anonymous patron more informative. It
also removes a potential source of log noise if the AnonymousPatron
system preference happens to be set to a blank value.
Fridolyn SOMERS [Tue, 8 Oct 2013 07:34:42 +0000 (09:34 +0200)]
Bug 11009: Do not display circulation history of anonymous patron
When using an anonymous patron to anonymise issues history, this patron
may have a huge number of old issues. In this case, trying to display
the reading history of this patron will perform a huge SQL query.
It is not useful to have the reading history of this anonymous patron.
This patch adds an alert instead of old issues when displaying reading
records of anonymous patron.
Test plan :
- Set syspref AnonymousPatron to 0.
- Select a borrower with old issues. For example 123.
- Look at its reading records page : members/readingrec.pl
=> Old issues are displayed in a datatable
- Set syspref AnonymousPatron with this borrower number. For example 123.
- Look at its reading records page
=> Old issues are not displayed and an alert is displayed
- Using SQL query, remove old issues of this borrower :
DELETE FROM old_issues WHERE borrowernumber=123.
- Look at its reading records page
=> A message is displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works as advertised and seems like a reasonable thing to do. I
suspect that someone will object... Perhaps that person will implement a
solution which uses an AJAX DataTable.
projects / koha.git / log