Galen Charlton [Fri, 20 Jun 2008 13:11:22 +0000 (08:11 -0500)]
bug 2000 - remove admin/issuingrules.pl
Patch to remove issuingrules.pl in favor of
using smart-rules.pl to manage loan and fine
rules. Several reasons for this:
* issuingrules.pl's matrix could grow rather large
if the library has a large number of item types
and patron categories
* successfully entering rules via issuingrules.pl
requires placing commas within input fields
* a sparse circulation policy matrix takes the
same amount of screen space as one that uses
rules for a lot of specific patron category/item type
combinations.
* having two administrative interfaces to the same
policy settings could be confusing.
* UI design of smart-rules.pl better lends itself
to adding more policy setting attributes to the
rules matrix.
Galen Charlton [Fri, 20 Jun 2008 13:11:21 +0000 (08:11 -0500)]
bug 2000 - removed finesrules.pl
Removed the separate admin/finesrules.pl script
to set the fines policy matrix: since admin/finesrules.pl
and admin/issuingrules.pl both touch issuingrules.pl, creating
a specific fine rule could silently override a default issuing
rule and prevent items from being checked out.
Circulation policy matrix settings for fines are now
handled in admin/smart-rules.pl
Galen Charlton [Fri, 20 Jun 2008 13:11:20 +0000 (08:11 -0500)]
bug 2000 - changes to TooMany()
The C4::Circulation::TooMany() function, which determines
if a patron is at the maximum loan limit, has been
changed to work as follows:
1. Checks the issuing rule that would apply to the
prospective loan to see if a loan limit (maxissueqty)
has been set.
2. Counts the number of loans that the patron has
that would fall under that loan rule.
IMPORTANT: that means that if a specific loan rule
exists for the branch, patron category, and item type
in question, *only* that rule's maxissueqty will be
checked here - it will not go on to check whether
a less specific rule has a lower loan limit.
3. If adding one more loan would bring that count
over the limit, returns a "too many" error.
4. If the loan hasn't exceeded a specific limit, checks
whether a branch/patron category circ rule has
specified a loan limit, regardless of item type.
If the patron has already reached *that* limit, returns
the "too many" error.
This routine retrieves the branch/patron category circulation
rules for a given branch and patron category. The return
value is a hashref containing the following key:
maxissueqty - maximum number of loans across all item types
This will first check for a specific branch and
category match from branch_borrower_circ_rules.
If no rule is found, it will then check default_branch_circ_rules
(same branch, default category). If no rule is found,
it will then check default_borrower_circ_rules (default
branch, same category), then failing that, default_circ_rules
(default branch, default category).
If no rule has been found in the database, it will default to
the built in rule:
Galen Charlton [Fri, 20 Jun 2008 13:11:18 +0000 (08:11 -0500)]
bug 2000: addition changes to rules editor
* Added ability to specify total loans allowed at a library
for the default patron category. If set, the default
limit is applied if no rule for the specific library
and patron category is set.
* Added ability to specify default total loans allowed
for the default library; this is applied if no rule
for the specify library is set.
* Form now indicates if the number of current checkouts
allowed is unlimited.
Galen Charlton [Fri, 20 Jun 2008 13:11:17 +0000 (08:11 -0500)]
bug 2000 - add total loan limit to alt. issuing rules
The alternate issuing rules editor can now allow
defining the maximum number of loans that a borrower
of a given category can take out per branch, regardless
of item type.
The form for entering this limit now appears below
the form for setting loan rules per patron category
and item type. The form only appears if a specific
branch is chosen, not if the default branch is used.
Galen Charlton [Fri, 20 Jun 2008 13:11:16 +0000 (08:11 -0500)]
bug 2000 - fix order of issuingrule lookup
Extended help on the alternate circulation rules
form to list the order of issuingrules lookup as
follows:
same library, same patron type, same item type</li>
same library, same patron type, default item type</li>
same library, default patron type, same item type</li>
same library, default patron type, default item type</li>
default library, same patron type, same item type</li>
default library, same patron type, default item type</li>
default library, default patron type, same item type</li>
default library, default patron type, default item type</li>
This includes modifying two routines in C4::Circulation to
follow this order: GetLoanLength() and GetIssuingRule().
The reason for this change is to have Koha exhaust all issuingrules
possibilities for a branch before checking the rules for
the default branch - this is consistent with what an admin
might expect from looking at the issuingrules forms, which display
settings a branch at a time, and is more consistent with how
circulation rules should work for indepdendent branches.
Galen Charlton [Fri, 20 Jun 2008 13:11:15 +0000 (08:11 -0500)]
bug 2000 - alternate issuing rules - set sorting of rules
Issuing rules are now explicitly sorted by patron category,
then item type. The default patron category sorts last; within
a list of item types for a given patron category, the default
item type sorts last. This follows the order in which
the issuing rules are applied.
Since the primary sort is patron category, also moved that
to be the first column in the issuing rules table.
Galen Charlton [Fri, 20 Jun 2008 13:11:14 +0000 (08:11 -0500)]
bug 2000 - alternate issuing rules - some form cleanup
Improvements to smart-rules.pl to allow it to
replace issuingrules.pl.
* standardized "borrower type" to "patron category"
* made default item type and patron category ('Any')
translatable
* regularized construction of parameters for rule
deletion operatrion
The first new table is branch_borrower_circ_rules.
This table is used to store circulation rule attributes
that apply to a combination of patron category and branch
across all item types. The one attribute defined is
maxissueqty, which sets the maximum number of loans
that a patron of a given category can take out at a given
branch.
Note that branch_borrower_circ_rules is for attributes
that apply across all item types. This means that
issuingrules.maxissueqty has a different meaning: it is
the maximum number of loans per branch, category, and item type;
if issuingrules.itemtype is '*', that is a *default*
circulation rule used if no more specific rule is found.
The new table will allow the implementation of total
loan limit across item types without making the wildcard
'*' in issuingrules ambiguous. Specifically, if branchcode,
categorycode, or itemtype is issuingrules is '*', that will now
always mean a loan rule to be applied if a more specific rule cannot be found.
Setting issuingrules.itemtype to '*' will no longer mean
to set a total limit across item types for maxissueqty.
The remaining new tables are used to store default
rules for the default branch, the default patron category,
or both:
default_branch_circ_rules - for a given branch, specify
the rule to apply if no more specific rule on
branch and patron category is found (i.e. patron category is default)
default_borrower_circ_rules - for a given patron category,
specify the rule to apply if no more specific rule
on branch patron category is found (i.e., branch is default)
default_circ_rules - global default if no more specify rule
on patron category and branch is available. Note that this
table is constructed so that it can have at most
one row.
SIP - Lots of regexp hacking of input streams and verbose debugging feedback.
The basic problem is that the SIP logic doesn't know where the
input is coming from. It might be a RAW socket, and it might
be telnet. If it is telnet, although the specs declare a
character set (from MS, unfortunately), they do not specify a telnet
implementation. So you might get telnet handshaking or
renegotiations in the middle of an otherwise peaceful session and
these should not be taken as SIP commands. Patches include a move
towards using $CRLF from Socket to avoid problems w/ foreign platform
mapping \n and \r to \015 or \012.
Galen Charlton [Thu, 19 Jun 2008 21:20:28 +0000 (16:20 -0500)]
bug 2264: do not clear patron zipcode and city
When edting only a part of the patron record (e.g.,
the library use section or the alternate address), the
zipcode and city were cleared due to an error in
form processing. Now the city and zipcode are set
only of those fields are actually in the submitted form.
Galen Charlton [Thu, 19 Jun 2008 21:20:27 +0000 (16:20 -0500)]
bug 2263 - transfer zipcode when selecting guarantor
The template for the guarantor search implies that
the zipcode is one of the values to be copied from
guarantor to guarantee. Fixed so that the transfer
can actually take place.
Owen Leonard [Thu, 19 Jun 2008 15:49:27 +0000 (10:49 -0500)]
Redesigning and bugfixing language-picker. Switching from fixed footer positioning to one with flows with page length. Fixing major unreported bug which prevented any but the first sublanguage menu from displaying.
Galen Charlton [Thu, 19 Jun 2008 14:30:59 +0000 (09:30 -0500)]
bug 2253: improve rebuild_zebra's handling of zebraqueue
Prior to this patch, rebuild_zebra.pl -z was effectively
hanging on to a lock on the zebraqueue table, preventing
other scripts from inserting new entries into the table.
This had the effect of causing circulation operations
to time out.
Refactored by having rebuld_zebra.pl pull the active
queue into memory, then mark entries done by zebraqueue.id.
Consequently, rebuild_zebra.pl should no longer
block adding new entries into zebraqueue.
Galen Charlton [Thu, 19 Jun 2008 14:03:37 +0000 (09:03 -0500)]
bug 2258 - new script to sync embedded items
Created a new script, sync_items_to_marc_bib.pl,
to replace the item tags embedded in the MARC bib
records with fresh versions taken from the items table.
Assuming that you're using Zebra, rebuild_zebra.pl -b -z
or rebuild_zebra.pl -b -r should be run after running
this script.
This script should be run if you have used
link_bibs_to_authorities.pl prior to the first
patch for bug 2258. It can also be used if there
is any reason to suspect that the embedded item tags
do not reflect the items table.
With this script I am creating a maintenance/ subdirectory of
misc/ to hold scripts that are meant to fix problems
in the database but are not (or should not be, anyway) necessary
for regular use.
Documentation: add to documentation for server side scripts
Andrew Moore [Wed, 18 Jun 2008 18:04:17 +0000 (13:04 -0500)]
Bug: 2259: eliminate lines too long for git to use.
This patch modifies 13 HTML templates and includes that have lines in them longer than 998 characters. Lines this long are known to break git.
I believe that none of these change behaviour at all, but I'm concerned about one of them. It adds whitespace (carraige returns) inside a <title> tag. I'm not certain that all browsers will deal with this OK.
Galen Charlton [Wed, 18 Jun 2008 19:50:22 +0000 (14:50 -0500)]
bug 2258 - do not duplicate embedded items
If a MARC bib is modified by this batch job,
do not duplicate the item tags embedded in
it (e.g., 952 for MARC21). When modifying
a bib record, any embedded item tags must
be removed before calling ModBiblio - perhaps
this should be moved to ModBiblio itself.
Joshua Ferraro [Wed, 18 Jun 2008 18:57:22 +0000 (13:57 -0500)]
Fix for bug 2212: Searching with Itemtype limit doesn't work
The issue was that the index for itemtype is different depending
on whether you're using item-level or bib-level itemtypes. This
patch detects the system choice and sets the index properly
Joshua Ferraro [Wed, 18 Jun 2008 18:01:20 +0000 (13:01 -0500)]
Resolves bug 2250: RFC: New System Preference to Determine which 'Types' and associated icons to display in advanced Search
For documentation, please indicate that as part of profiling,
staff can refer to the AdvancedSearchTypes system preference to
choose where to draw the advanced search 'Types' from. Currently
this is implemented as a choice, between itemtypes and ccodes,
but it's been designed to work with any authorised value so long
as an index exists for searching by that authorised value.
By default, and if this syspref doesn't exist, it will pull from
itemtypes as before.
Owen Leonard [Wed, 18 Jun 2008 16:24:58 +0000 (11:24 -0500)]
A better fix for Bug 2229, I think. Text inside basket.js can be translated fine, this instance simply lacked the call to the dummy function for gettext. It's important /not/ to have the "Cart" text in masthead.inc because there should be no Cart link for users with javascript turned off.
Owen Leonard [Wed, 18 Jun 2008 14:58:05 +0000 (09:58 -0500)]
Lowering truncation threshold for display of system preference values to better accomodate average display size. Compromise fix for Bug 2132, "Sys Pref Column too Wide."
Owen Leonard [Tue, 17 Jun 2008 19:56:08 +0000 (14:56 -0500)]
Restructuring guarantor display to address Bug 2220 ("Guarantor needs two fields to be labeled"). This change probably means an updated screenshot is necessary.
Galen Charlton [Tue, 17 Jun 2008 15:12:25 +0000 (10:12 -0500)]
bug 2252 - check correct items for item-specific holds
C4::Reserves::_Findgroupreserves(), instead of
getting all requests for a bib, now gets only the
requests that are title-level (itemnumber is null)
or for that specific item. This prevents an item
from filling an item-level hold for a different item
attached to the same bib, which is the expected
behavior for item-level holds.
Owen Leonard [Tue, 17 Jun 2008 12:53:07 +0000 (07:53 -0500)]
Markup corrections to cataloging pages; Fixes for Bugs 2166 (" Book Jackets Not Showing on My Summary"), 2194 ("No results for Authority Search Shows blank record"), and 2196 ("Extra comma being added to record display")
Joe Atzberger [Tue, 17 Jun 2008 03:15:26 +0000 (22:15 -0500)]
Bugfix patron search for cards/labels related to pagination.
Pagination was working for searching, but the "type" and batch_id
were not making it onto subsequent pages (i.e., the 2nd page of "B"
names). This corrects the problem with the base URL passed to
pagination_bar.
Joe Atzberger [Mon, 16 Jun 2008 20:05:05 +0000 (15:05 -0500)]
Bugfix LDAP config to play nice with Zebra.
The section in KOHA_CONF was moved inside <config> and renamed
<ldapserver>. Perldoc updated to correspond. Tested with local
LDAP and existing test (t/db_dependent/Auth_with_ldap.t).
Patch can be applied with confidence based on comparison of 2 dumps:
perl -e 'use C4::Context; use Data::Dumper; my $context=C4::Context->new("./old_config.xml"); print Dumper ($context->{server}->{ldapserver}),"\n";'
and
perl -e 'use C4::Context; use Data::Dumper; my $context=C4::Context->new("./new_config.xml"); print Dumper (C4::Context->config("ldapserver")),"\n";'
These dumps reflect the way Auth_with_ldap accesses configuration info before and after.
Joe Atzberger [Mon, 16 Jun 2008 17:09:43 +0000 (12:09 -0500)]
Bugfix 1978 - on circ, check date specified output is later than now.
This resolves all remaining significant parts of the bug.
Note that this may have to be revisited for hourly or partial-day circ functionality
for 3.2.
Frederic Demians [Fri, 13 Jun 2008 07:21:13 +0000 (09:21 +0200)]
In OPAC, verticaly align on top biblio records and book cover image
Without this patch, on OPAC result page, depending whether book cover
image is available or not, biblio records and book cover are badly
verticaly aligned. The information is in the middle of the cell.
Galen Charlton [Mon, 16 Jun 2008 13:45:55 +0000 (08:45 -0500)]
bypass corrupt bibs when linking headings
During link_bibs_to_authorities.pl run, a bib was
observed that had both biblioitems.marc and biblioitems.marcxml
set to blank or NULL. Added check to verify that a
defined value is returned from GetMarcBiblio(); may follow
up with additional patches once it's determined how
the corrupt bib came to be loaded.
Galen Charlton [Mon, 16 Jun 2008 13:15:03 +0000 (08:15 -0500)]
bug 2247: don't crash linking bib heading with invalid subfield
Prevent following crash when linking a bib heading to an
authority record if the bib heading has a subfield whose code
is ')' or any other regular expression metacharacter:
Unmatched ) in regex; marked by <-- HERE in m/) <-- HERE / at
/home/koha-pro/kohaclone/C4/Heading/MARC21.pm line 186.
Galen Charlton [Wed, 11 Jun 2008 21:43:22 +0000 (16:43 -0500)]
kohabug 2112 - add indicators to MARC display
In any MARC record display in the OPAC or staff client
that displays the MARC tag numbers, the indicators are
now displayed as well, following the tag number. If an
indicator is a blank, it is displayed as '#'.
Add a function to C4::Koha, display_marc_indicators(), to
generate this display form of the indicators.
Refactoring note: the four scripts changed in this commit
have a lot of duplicate code that could be merged into
a MARC displayer class.
Documentation notes: screenshots of tagged MARC record
displays should be updated.
Galen Charlton [Wed, 11 Jun 2008 21:38:15 +0000 (16:38 -0500)]
kohabug 2207 - improve indicator input in MARC editor
Instead of having one input field for both indicators
of a variable field, the bib and authority MARC editor
now has an input field for each indicator. This has
two main advantages:
* it is easier to tell what the indicator values are,
even when the first indicator is a space
* it is easier to set the first indicator to blank
and the second indicator to non-blank.
Galen Charlton [Tue, 10 Jun 2008 16:05:48 +0000 (11:05 -0500)]
bug 2235: fix various data-corrupting bugs in MARC editor
1. Non-ASCII characters in the 942$h (biblioitems.cn_class)
would cause an edit to fail and lead to a corrupt MARC record in
biblioitems.marc and biblioitems.marcxml. Fixed by
turning on Perl's UTF-8 flag for MARC tag parameters
processed by C4::Biblio::TransformHtmlToMarc
2. Do not add empty 006 and 007 fields if the corresponding
input fields are blank.
3. Make it possible to save '0' as a valid subfield
value.
Frederic Demians [Tue, 10 Jun 2008 09:23:09 +0000 (11:23 +0200)]
Fixes bug #2231
In OPAC, when cart is sent by email, the email contains an attachement:
an ISO2709 file with cart biblio records. Most users don't have a clue
what to do with this file.
This patch modifies opac-sendbasket.tmpl to clarify what the attachment is.
It also fix a bug in opac-sendbasket.pl which wasn't reading the template
section containing information about the basket:
Here is your cart, sent from the Koha Online Catalog... foo
It may be necessary to verify that template text is in 'valid' English...
Galen Charlton [Mon, 9 Jun 2008 16:33:04 +0000 (11:33 -0500)]
bug 2098: do not apply stemming if search term has digits
If a search contains a digit, it is almost certainly an identifier, and should
not be stemmed. This is particularly relevant for ISBNs and ISSNs, which
can contain the letter "X" - for example, C4::Search::_build_stemmend_operand
would reduce "014100018X" to "x ", which for a MARC21 database would bring
up irrelevant results (e.g., "23 x 29 cm." from the 300$c).
With this patch, supplying a search term that contains one or more digits
followed by "X" will no longer retrieve irrelevant results. This applies
to catalogs using Zebra and query stemming.
Joshua Ferraro [Tue, 10 Jun 2008 13:14:13 +0000 (08:14 -0500)]
Revert "Gives a type YesNo to AnonSuggestions syspref"
As pointed out by Joe, this wasn't correct, it's not supposed
to be a YesNo type.
This reverts commit 0c512c7dd41599a18543b3791c89c4c03b5352aa.
Add | separator between authors repetitions in OPAC detail page
Without this patch authors display on OPAC is weird.
You get for example:
Author: Freud--Sigmund Lacan--Jacques
And you finish to read an author 'Simund Lacan'
Galen Charlton [Fri, 6 Jun 2008 23:15:23 +0000 (18:15 -0500)]
kohabug 2225 - fix resource leak in SimpleSearch
Explicitly destroy ZOOM Query and ResultSet objects created
in C4::Search::SimpleSearch() - for long-running users
of SimpleSearch, such as link_bibs_to_authorities.pl or
the matcher used by the staging MARC import, the failure
to do this causes a memory leak in both the client Perl
script and (in the case of ZOOM ResultSet objects) a
corresponding resource leak in zebrasrv for the life
of the Z39.50 connection.
With this change, link_bibs_to_authorities.pl will be
be able to process large bib datasets without leaking
memory due to the Z39.50 lookups it does.
Similar changes are indicated for all uses of
ZOOM that could last longer than a single CGI
query.
Galen Charlton [Fri, 6 Jun 2008 17:41:41 +0000 (12:41 -0500)]
kohabug 1993 - task scheduler improvements
[1] Removed hardcoded path to original developer's
Koha configuration file; now checks KOHA_CONF.
[2] Now attempts to figure out if a task was successfully
added to the task queue; if it wasn't, the failure
is now reported in the task scheduler page.
[3] When traveling to the task scheduler page from a
saved report, the report in question is now
selected by default.
[4] Removed the button to edit a queued task; this is
not supported.
This patch is essentially a bandage; I've added a BUGS
section and some FIXMEs to the POD for C4::Scheduler
detailing some issues - a refactoring of the task
scheduler is in order at some point.
Galen Charlton [Thu, 5 Jun 2008 17:26:39 +0000 (12:26 -0500)]
bugfix - don't allow deletion of authority records from OPAC
Because of some copy-and-paste work, it was possible to
construct an OPAC URL that would attempt to call DelAuthority
on a selected authority record. This is perhaps taking
patron contributations to library metadata a bit too far.
projects / koha.git / log