Jonathan Druart [Mon, 17 Mar 2014 16:21:09 +0000 (17:21 +0100)]
Bug 11939: set active currency for non-English sample data
Revised Test Plan
-----------------
The following SQL commands were used to test this.
installer/data/mysql/en/optional/parameters.sql is part of the
first patch and didn't really need testing again.
installer/data/mysql/de-DE/optional/parameters.sql is not part
of the patch, but since I was playing with the script, which
is also attached here, it was included for good measure.
use kohadata;
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/pl-PL/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/es-ES/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/ru-RU/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/uk-UA/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/it-IT/necessari/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/de-DE/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/en/optional/parameters.sql
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ed10e5226cc8e9852dfee3f5520976695cb99412) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Zeno Tajoli [Fri, 14 Mar 2014 10:38:07 +0000 (11:38 +0100)]
Bug 11939: set active currency when using English sample data
This patch offers a better default for currencies,
with USA dollar as default active currency.
To test the patch:
1)Install master without the patch, during web installation
select 'parameters.sql' file
2)Finish install and go to Administration -Currencies & Exchange rates
3)No active currency
4)Install master with this patch, during web installation
select 'parameters.sql' file
5)Finish install and go to Administration -Currencies & Exchange rates
6)Now USA dollar is the active currency
NOTE: This does solve the problem of everything being NULL for active,
and lacking an active value. It also corrects the description
of the optional item to check related to currencies.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
To test:
1) Do a fake translation to Armenian,
mkdir koha-tmpl/intranet-tmpl/prog/hy-Armn
2) Go to Administration > System preferences > I18N/L10N
3) Armenian description looks like the second string in Bug description
4) Apply the patch
5) Run updatedatabase.pl
6) Reload page, now description look as first string in
Bug description (it's the sixth letter, similar to 't')
Ammended patch, wrong column.
Signed-off-by: Holger Meißner <h.meissner.82@web.de> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes the English sample file for translations and includes
a database update to correct the string in existing installations.
Passes all tests and QA script.
This sql file tries to insert data into nonexistent tables.
It is useless and can be removed.
Test plan:
git grep sample_only_param_tables
should not return any result.
NOTE: This is basically a git rm. Simple patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
File is not used by the installers and it wouldn't work
with today's Koha for trying to insert data into non-existant
tables and tables with different structure.
Daniel Barker [Tue, 14 Jan 2014 20:57:19 +0000 (09:57 +1300)]
Bug 8168: Fixing header of non CSV files for overdue notices
This determines if the CSV header should be included or not and
then generates it as needed using the delimiter specified in the
delimiter system preference.
TEST PLAN
---------
1. make some overdues books
2. run the overdue notices script without the -csv
3. check emails notice csv header is in the email
4. apply the patch
5. run the overdue notice again
6. check email notice CSV header is absent
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a31210efd34dc7e3c65f8491c26c2d8f8fc36dfb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 14 Mar 2014 15:18:19 +0000 (11:18 -0400)]
Bug 11938: fix capitalization: Serial prediction pattern preview - Publication Date
During add or edit of a subscription when you test the
prediction pattern, "Publication Date" in the displayed table
has incorrect capitalization. This patch corrects.
To test, apply the patch and create or edit a subscription. In
step two click the "test prediction pattern" button to display
the table. "Publication date" should be correctly capitalized.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, all good.
Jonathan Druart [Fri, 21 Feb 2014 16:16:43 +0000 (17:16 +0100)]
Bug 11637: don't try to guess publication dates for irregular subscriptions
Test plan:
Create a subscription with an irregular numbering pattern.
Verify the prediction pattern. With this patch, it should show "unknown"
instead of the date of the first issue publication date.
This patch does not fix the issue on generating the next serial.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This is a partial fix for a small regression in the serials module.
Now the prediction pattern doesn't predict dates when you test it,
and shows 'Unknown' instead.
We still need to fix the 'planned date' set for the expected serial.
There should be no date, it should also be 'unknown'.
Magnus Enger [Fri, 7 Mar 2014 08:10:49 +0000 (09:10 +0100)]
Bug 10647 - Make OPAC MARC plain view work for all flavours of MARC
On "MARC view" in the OPAC, clicking on "Plain view" does not work
for UNIMARC and NORMARC.
To test:
- Make sure you have a UNIMARC or NORMARC setup
- Go to the "MARC view" of a record in the OPAC
- Click on "view plain" and observe the "Sorry, plain view is
temporarily unavailable." error message
- Apply the patch
- Click on "view plain" and observe that a plain view of the MARC
record is now displayed
- Sign off
I have only tested this on NORMARC, it might be good if someone
can test on UNIMARC.
Updated 2014-03-13: Incoroprates changes suggested by Marcel.
Test plan is the same as before.
Updated 2014-03-13: Tested in my UNIMARC system.
toggled opactheme to all three values, with OPACXSLTDetailsDisplay
and OPACXSLTResultsDisplay both set to default.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with MARC21 and UNIMARC, passes all tests and QA script.
In the results view for OPAC and Intranet search results, titles are
currently displayed in 245 $a $b $h order. In detailed view the titles
are displayed in the better 245 $a $h $b order.
This patch corrects the behaviour for NORMARC and MARC21 in
BOOTSTRAP: all now display 245 $a $h $b.
To test:
- Find records containing 245 $a $b and $h fields.
- Compare the way they look in detail and results view on the OPAC
(bootstrap).
- Apply the patch.
- Re-check detail and results view: all should now look the same
on the OPAC (bootstrap).
In the results view for OPAC and Intranet search results, titles are
currently displayed in 245 $a $b $h order. In detailed view the titles
are displayed in the better 245 $a $h $b order.
This patch corrects the behaviour for NORMARC and MARC21: all now
display 245 $a $h $b.
To test:
- Find records containing 245 $a $b and $h fields.
- Compare the way they look in detail and results view in OPAC
(non-bootstrap) and intranet (you should see a discrepancies).
- Apply the patch.
- Re-check detail and results view: all should now look the same in
both OPAC (non-bootstrap) and intranet.
Signed-off-by: Jesse Weaver <pianohacker@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described.
Checked with Magnus Enger about the changes for the NORMARC
stylesheets and the changes are ok.
Bug 9114: Make frameworks import/export routines correctly use UTF-8
Currently both the import_export_framework.pl script outputs data with
Perl's default encoding, ISO-8859. This patch properly sets
the binmode to UTF-8 when exporting SQL and CSV files using the PerlIO
layer (":encoding(UTF-8)") for STDOUT.
To test:
Export step test
- Use some ASCII character(s) with DIACRITICS in some field description
in a chosen framework.
- Export the framework at Administration > MARC frameworks
- Run this to check the file is ISO-8859 encoded:
$ file export_XXX.csv
export_XXX.csv: ISO-8859 text, with very long lines
(Note: try SQL and other output formats too. But not ODS)
- Apply the patch
- Export the framework again (change the name), and test encoding:
$ file export_XXX_2.csv
export_XXX_2.csv: UTF-8 Unicode text
Import step test
I assume you have two files, export_XXX.csv (ISO-8859 encoded) and
export_XXX_2.csv (XXX will depend on your framework's code)
- Reset your testing branch to master
- Import export_XXX.csv
- The string with non-ASCII chars is truncated at the first non-ASCII
char's position (Note: this is the current behaviour).
- Import export_XXX_2.csv
- The non-ASCII chars are broken, the logs show errors on non-UNICODE
chars. (Note: even thou UTF-8 is the expected encoding it is
treated as ISO-8859).
- Apply the patch
- Import the good (UTF-8 as expected) file and check everything worked
as expected.
No double encoding should occur with either combination of formats.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
I put some Norwegian and accented letters in a fremawork to test.
Before the patch, the exported CSV came out as ISO-8859, after the
patch it came out as UTF-8. ODS and XML (viewed in LibreOffice)
both looked good, before and after the patch.
Importing the ISO-8859 CSV cut off the strings at the first non-ASCII
char. Importing the UTF-8 CSV worked as epected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes tests and QA script.
Jonathan Druart [Thu, 24 Oct 2013 09:41:11 +0000 (11:41 +0200)]
Bug 11127: OPAC suggestions form - complain when trying to 'delete selected' without having selected any
To reproduce:
1/ go on opac-suggestions.pl
2/ create a suggestion
3/ click on the delete link without checking any checkbox
The form is submitted with a message "The selected suggestions have been
deleted.".
Test plan:
0/ enable the bootstrap theme
1/ after applying the patch, click on delete without any checkbox
checked, a js alert should occur.
2/ check at least a cb and click on the delete link. The deletion should
work.
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described.
Nicolas Legrand [Thu, 13 Mar 2014 09:40:27 +0000 (10:40 +0100)]
Bug 11934 - Replace given by if-else statements
To test:
[1] Verify that prove -v t/db_dependent/Circulation_issuingrules.t
passes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
replaces given-when with if-elsif-else constructs.
Tests still pass and code looks good.
Sophie Meynieux [Mon, 10 Mar 2014 16:07:07 +0000 (17:07 +0100)]
Bug 11647: (follow-up) test if user is logged in before proposing to subscribe or unsubcribe from serial routing list
To test :
1) Search for a subscription with patron notification active
2) If you're not logged in, a message warns you that you must log
in to subscribe to notification on new issues
3) If you log in, and have not yet subscribed to this routing list,
you've got a link to subscribe
4) Once you have subscribed, you've got a link to unsubscribe
5) If you log out, you've got a message saying you must log in to
subscribe
6) If you log in with another user, you've got the link to subscribe
or unsubscribe depending on if he has already subscribed.
Sophie Meynieux [Fri, 31 Jan 2014 11:22:05 +0000 (12:22 +0100)]
Bug 11647: require that user log into OPAC to request email subscription notifications
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: remy juliette <remy.gonzalves@iepg.fr> Signed-off-by: Aurelie Fichot <aurelie.fichot@iepg.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Instead of hiding the feature completely, now a message
tells the user to login to subscribe to the email
notifications.
Fridolin Somers [Wed, 5 Mar 2014 13:26:14 +0000 (14:26 +0100)]
Bug 11366: make "no group" option in acq basket group drop-down translatable
in Acq baskets, there's a pull-down for basket groups. One of the
entries in that pull-down is "No group", which is untranslatable.
This string is hard-coded in Perl.
This patch removes the string from Perl to set it has first option
in select. To allow it to be default value, the option "Add new group"
is moved to last position.
Test plan :
- Go to a closed aquisition basket in no basket group :
cgi-bin/koha/acqui/basket.pl?basketno=x
=> You see "No group" selected in combobox "Basket group"
- Cick on this combobox
=> You see "No group", then existing basket groups and then "Add new
group"
- Select a basket group and click on "change basket group"
=> You see the basket group name in combobox
Use translation, for example fr-FR
- go to src/misc/translator
- run : perl translate update fr-FR
=> You find in PO file :
#: intranet-tmpl/prog/en/modules/acqui/basket.tt:365
#, fuzzy, c-format
msgid "No group"
msgstr "Nom de groupe"
- remove ", fuzzy" and correct translation : "Pas de groupe"
- run : perl translate install fr-FR
- Go to translated aquisition basket page
=> You see translated option in combobox
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 21e6518d32477fa1fe59da64d735f3f07ae49bcd) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Tue, 11 Mar 2014 14:58:44 +0000 (10:58 -0400)]
Bug 10415 - Add course reserves to staff client home page
A link to course reserves is in the global header menu but not on the
home page. All links from the global header should be present on the
home page as well. This patch adds it.
To test, apply the patch and if necessary clear your browser cache. View
the staff client home page. If you have "UseCourseReserves" enabled you
should see a link for the course reserves page which is visually
consistent with the other module links. If you do not have course
reserves enabled you should not see the link.
Unrelated: I positioned the admin link after the tools link because it
bugged me.
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: marjorie barry-vila <marjorie.barry-vila@ccsr.qc.ca> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described.
Course reserves is still accessible without permissions, but
you can't make any changes to the reserves then.
Fridolin Somers [Wed, 26 Feb 2014 10:03:18 +0000 (11:03 +0100)]
Bug 11845 - set overlay and import status translatable in addorderiso2709.tt
In addorderiso2709.tt, the text for overlay and import status come from
database and was not translatable. Ths patch fixes that.
Same as Bug 10170.
Test plan :
- Go to acquisition module
- Display an open basket
- Click on "From a staged file"
- Look at table
=> Without patch, you see codes in "Status" column : staged, imported, ...
=> With patch, you see descriptions in "Status" column : Staged, Imported, ...
- Click on a "Add orders"
- Look at table
=> Without patch, you see codes in "Match?" column : no_match, auto_match, ...
=> With patch, you see descriptions in "Match?" column : No match, Match found, ...
Signed-off-by: Nathalie CHATILLON <nathalie.chatillon@uhb.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is an improvement. Only the translation of auto_match as Match found
could perhaps be further improved.
Kyle M Hall [Mon, 13 Jan 2014 17:39:51 +0000 (12:39 -0500)]
Bug 11531: make it possible to edit transport cost for a new libraries
If you are using the transport cost matrix, and you create a new
library, you cannot edit the fields for this library!
Test Plan:
1) Enable the transport cost matrix
2) Set some transport cost values in the matrix
3) Save the matrix
4) Create a new library
5) View the transport cost matrix again
6) Note the uneditable fields for the new branch
7) Apply this patch
8) View the transport cost matrix again
9) Note you can now edit the fields for the new branch
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Owen Leonard [Mon, 10 Feb 2014 14:29:13 +0000 (09:29 -0500)]
Bug 11718 - Use new DataTables include in reports templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
circ-related pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Reports -> Guided reports -> Use saved
(reports/guided_reports.pl?phase=Use saved):
"Creation date" sorting has been reconfigured to use the title-string
method for sorting on an unformatted date. C4:Reports::Guided.pm has
been modified to pass an unformatted date to the template. Sorting
should work correctly for all settings of the dateformat system pref.
- Reports -> Catalog by item type
(reports/manager.pl?report_name=itemtypes)
- Reports -> Serials statistics wizard (reports/serials_stats.pl):
The subscription begin and subscription end columns have been modified
to use the title-string filter for sorting. An unformatted date is now
passed from reports/serials_stats.pl to the template, where the
KohaDates filter is used for formatting. Sorting is based on the
unformatted date. Sorting should work correctly for all settings of
the dateformat system pref.
- Sorting of titles should now exclude article from sorting.
- Minor template improvements:
- Vendor name now links to vendor details.
- Subscription title now links to subscription details.
- Library name is now shown instead of branchcode.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Checked all pages, no regressions or Javascript errors detected.
Galen Charlton [Wed, 26 Feb 2014 16:45:09 +0000 (16:45 +0000)]
Bug 11459: use drop-down to set OrderPdfFormat syspref
This patch converts the OrderPdfFormat to a choice.
To test:
[1] Look at OrderPdfFormat in the system preferences editor. Verify
that there is a drop-down giving a choice among the three PDF
basketgroup printing formats.
[2] Change the OrderPdfFormat setting and print a basketgroup. Verify
that the chosen template is used.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
I followed the test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves usability of the OrderPdfFormat system preference.
Works as described, only changes YAML file.
Owen Leonard [Mon, 24 Feb 2014 16:35:52 +0000 (11:35 -0500)]
Bug 11832: fix JavaScript error on staff client place hold screen if record has no items
If a hold operation is blocked because the title has no items attached
the patron search autocomplete JavaScript triggers an error. This patch
modifies the template so that the JS is loaded only when items are
present.
To test, find a title which has no items attached. View the holds page
for that title. There should be no JavaScript error. Patron search
autocomplete should still work correctly for titles which have items
attached.
Deleted all items from a biblio record. Clicked the holds tab and
confirmed using firebug Javascript error occurs. Applied patch,
confirmed that the Javascript error described in comment 1 no
longer happens. Went to another biblio with items, and confirmed
patron auto-complete still functions.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0b5b8cef348b61761305dd0bbc574699404c7c69) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Tue, 25 Feb 2014 20:55:03 +0000 (15:55 -0500)]
Bug 11833 - fix filtering on saved report subgroup
Filtering the list of saved reports by subgroup doesn't work because the
filtering JavaScript was not updated when the table columns changed with
Bug 3134. This patch corrects the target column for filtering.
To test you must have multiple saved reports within one group, and at
least one of those in a subgroup.
- Apply the patch and go to Reports -> Use saved.
- Click the tab for the group which contains your reports.
- Choose the subgroup you want to filter on from the subgroup dropdown.
The list of reports should be correctly filtered by your subgroup.
NOTE: It seems weird to have the number of columns displayed change
when filtered, but this patch does correct the filtering.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Isaac Brodsky [Thu, 27 Feb 2014 15:10:33 +0000 (09:10 -0600)]
Bug 1047: Punctuation in site names no longer breaks Edit/Delete z39.50 server administration
The template used to show the Z39.50 server administration page had a
bug that caused it to not correctly escape generated query strings.
Because the Z39.50 server name is used to lookup the server in order
to edit or delete it, when the server name is not passed correctly in
the query string, it is impossible to bring up the edit or delete forms
(without manually entering the escaped string.)
This patch corrects which template is filter used to escape those query
strings.
To test:
(1) Login to intranet, go to Administration -> Z39.50 servers
(2) Select "New Z3.50 Server". Enter a server name that contains an
ampersand (&), e.g.: "FOO & BAR". Enter other details and submit.
Click OK to confirmation message.
(3) In the server list, click on the server name, the "Edit" or "Delete"
buttons for the server.
The correct and full server details should be brought up.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 09fa6f09587b930670633639e306b1141632fce3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Wed, 5 Feb 2014 15:35:47 +0000 (10:35 -0500)]
Bug 11686: make "please note your reason here..." translatable
Through some quirk of the translation script a predefined value on a
text input is not properly translated even though the string appears in
the po file. On the suggestions form the problem can be solved by using
the HTML5 placeholder attribute.
To test you must have existing suggestions to manage. Apply the patch
and:
- Update a translation by running tranlsate update [language code]
- Install/reinstall the translation by running translate install
[language code]
- In the English templates:
- Navigate to Acquisitions -> Suggestions and find the "Mark selected
as:" section below the table of existing suggestions.
- Select "Other" from the "choose a reason" field. A text input field
should appear with the placeholder text "please note your reason
here."
- In the templates you updated and installed, follow the same procedure
above. The placeholder text should now appear with the correct
translation.
- In both English and translated templates using this bulk-status option
should save your chosen status correctly with the correct reason,
whether that reason be predefined or manually entered.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Tested successfully with German - nice to see this fixed!
Fridolin Somers [Fri, 31 Jan 2014 13:47:09 +0000 (14:47 +0100)]
Bug 11649 - Always use words "copy number" - opac prog
In most cases, the value of items.copynumber is displayed using the
words "Copy number". But in some cases, it is just "Copy".
It would be better to always use "Copy number" because in translation
the word "Copy" means the action of coping.
This patch manages templates of opac prog theme.
To test, display an item containing a value in items.copynumber.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 113ce7808a69373117e7697ad16d06169fe97279) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Fri, 31 Jan 2014 13:46:20 +0000 (14:46 +0100)]
Bug 11649 - Always use words "copy number" - opac bootstrap
In most cases, the value of items.copynumber is displayed using the
ords "Copy number". But in some cases, it is just "Copy".
It would be better to always use "Copy number" because in translation
the word "Copy" means the action of coping.
This patch manages templates of opac bootstrap theme.
To test, display an item containing a value in items.copynumber.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 8a6f51e0ef9badf786345cbab51c80873ef872fc) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Fri, 31 Jan 2014 13:44:26 +0000 (14:44 +0100)]
Bug 11649 - Always use words "copy number" - intranet
In most cases, the value of items.copynumber is displayed using the
words "Copy number". But in some cases, it is just "Copy".
It would be better to always use "Copy number" because in translation
the word "Copy" means the action of coping.
This patch manages templates of intranet.
To test, display an item containing a value in items.copynumber.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0f9ec8f589e0afee79923570b71078d8c94b8986) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Fri, 31 Jan 2014 13:23:03 +0000 (14:23 +0100)]
Bug 11648 - Use word item instead of copy - opac prog
Sometimes, the word copy/copies is use to speak about item/items.
It would be better to use only item because translation of the word
copy depends on context, it should be used only when speaking about
copy like in "copy and paste".
This patch replaces copy/copies in opac prog theme.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 635d5441112171170bd3f2de7fdbf9a9feb62f48) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Fri, 31 Jan 2014 13:22:45 +0000 (14:22 +0100)]
Bug 11648 - Use word item instead of copy - opac bootstrap
Sometimes, the word copy/copies is use to speak about item/items.
It would be better to use only item because translation of the word
copy depends on context, it should be used only when speaking about
copy like in "copy and paste".
This patch replaces copy/copies in opac bootstrap theme.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 18456ea5fc605d0c6dc58a860fe963bfbd3ba972) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Fri, 31 Jan 2014 13:22:05 +0000 (14:22 +0100)]
Bug 11648 - Use word item instead of copy - intranet
Sometimes, the word copy/copies is use to speak about item/items.
It would be better to use only item because translation of the word
copy depends on context, it should be used only when speaking about
copy like in "copy and paste".
This patch replaces copy/copies in intranet.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String changes, no regressions found.
Jonathan Druart [Tue, 14 Jan 2014 11:21:43 +0000 (12:21 +0100)]
Bug 11550: Add UT for C4::Acquisition::GetOrder
If GetOrder is called with a nonexistent ordernumber or without any
ordernumber, it should return undef.
Test plan:
prove t/db_dependent/Acquisition.t
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updated number of tests to 68, tests and QA script all happy now.
Looked at a few pages in aquisition using GetOrder as well.
Jesse Maseto [Mon, 10 Mar 2014 13:39:22 +0000 (09:39 -0400)]
Bug 11695 - Fixed typo in marc21_field_008.xml
"Tree-character alphabetic code", to "Three-character alphabetic code"
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Trees are nice, but Three is better here.
String change, works as described.
David Cook [Thu, 2 Jan 2014 05:48:01 +0000 (16:48 +1100)]
Bug 11465: Show counts and amounts on OPAC 'your summary' tabs
This patch adds counts and amounts to the tabs in the 'your summary'
page of the OPAC patron account.
_TEST PLAN_
Before applying:
1) Choose a test patron
2) Place a few holds
3) Check in one of the holds so that it is waiting for the patron
4) Check out a few items
5) Check out another item that can generate fines (backdate it a few
weeks/months)
6) Run fines.pl to generate fines (make sure your finesmode syspref
is set to prod)
7) Check your OPAC patron account.
8) Note the tabs "Checked out, Fines, Holds, and Waiting"
Apply the patch
1) Switch your OPAC to the bootstrap theme
2) Refresh your browser for the OPAC patron account screen
3) Note that the applicable counts and amounts appear on the tabs
--
At the moment, I just have a Bootstrap patch. This is an easy patch
though, so I can duplicate to the other themes if necessary...
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests on bootstrap pass
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
"Waiting" doesn't appear to work for me with and without the patch.
"Checkouts", "Holds" and "Fines" work fine.
Frédérick [Mon, 9 Dec 2013 18:45:52 +0000 (13:45 -0500)]
Bug 11359: Add the borrower's cardnumber and phonenumber to the branch overdues report
The report also known as "Overdues with fines"
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass, this adds data to the Patron column on the
overdues with fines report to show the patron's cardnumber
and phone number.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described and passes all tests and QA script.
Kyle M Hall [Tue, 14 Jan 2014 15:37:09 +0000 (10:37 -0500)]
Bug 11555: Make "All" one of the default options for datatables
There are many instances where librarians would like to have the ability
to see all the rows in a datatable at one. It seems prudent to make this
a default option for datatables, rather than change it on a case by case
basis.
Test Plan:
1) View the circulation history for a patron
2) Note you can select to view 10, 25, 50, or 100 entries
3) Apply this patch
4) Reload the circulation history page for a patron
5) Note the new "All" option
6) Verify the "All" option shows all the rows at once
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I tested the translation for "All"
Owen Leonard [Fri, 21 Feb 2014 15:35:40 +0000 (10:35 -0500)]
Bug 11809: don't display 'Clear date' on OPAC patron details form if date of birth is required
On the OPAC's patron details form, if the date of birth field is
required we shouldn't offer the user a "clear date." This patch removes
the "clear date" link if the field is required.
To test, configure the BorrowerMandatoryField system preference to
require dateofbirth. Enable the OPACPatronDetails system preference and
log in to the OPAC. View the "personal details" form and confirm that
there is no "clear date" link next to the required date of birth field.
Remove dateofbirth from the BorrowerMandatoryField system preference and
re-test. The "clear date" link should appear.
Test in both prog and Bootstrap themes.
I tested with prog and bootstrap themes, adding/removing field 'dateofbirth'
in sys pref PatronSelfRegistrationBorrowerMandatoryField.
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Kyle M Hall [Fri, 14 Feb 2014 20:09:06 +0000 (15:09 -0500)]
Bug 11768: Show patron cardnumber in OPAC personal details
In previous versions of Koha, the patron cardnumber was displayed in the
personal details section of the OPAC for logged in users. A patron needs
to be able to access his or her cardnumber in some cases to access
online resources a library makes available that requires his or her
cardnumber. This is especially important for patron self registration
where a patron may not have a physical library card. This field should
be re-added to the patron personal details page.
Test Plan:
1) Apply this patch
2) Log into the OPAC
3) Browse to "your personal details"
4) Verify the patron cardnumber is visible
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Restores cardnumber on personal details tab in OPAC for
prog and bootstrap theme. Passes all tests and QA script.
Fridolyn SOMERS [Fri, 1 Feb 2013 16:52:11 +0000 (17:52 +0100)]
Bug 9532: fix reservability check when bib-level item types are in use
When itemtype is defined on biblio (item-level_itypes syspref), the
method C4::Reserves::CanItemBeReserved uses item->{itemtype}. But
ithe item comes from C4::Items::GetItem and it does not have an
'itemtype' key; in this method the item type value is always in
'itype' key.
This patch corrects it.
Test plan:
You should have itemtype on biblio and 'item-level_itypes' syspref
set to biblio.
This test plan is with ReservesControlBranch on ItemHomeLibrary.
- Choose a branch, a borrower category and an item type, for example
'NYC', 'CHILD' and 'DVD'
- Set an issuing rule for 'NYC', CHILD' and 'DVD' with 'Holds allowed'
set to 10
- Set an issuing rule for 'NYC', CHILD' and all item types with
'Holds allowed' set to 0
- Choose an item of a biblio with itemtype 'DVD', that can be reserved,
with 'NYC' as homebranch
- Choose a borrower with category 'CHILD'
- Try to request the item for the borrower
=> without the patch, you can
=> with the patch, you can't
You may check reserve is allowed with 'Holds allowed' > 0 on issuing
rule for 'DVD'.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Great test plan - thanks!
Confirmed the bug, and the fix. Looks good to me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7acd7f43a703c3aa853ea6e58153584c24ca6d09) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Mon, 5 May 2014 17:16:37 +0000 (17:16 +0000)]
Bug 9532: add regression test
To test:
[1] Run prove -v t/db_dependent/Holds.t. The last test
should fail.
[2] Apply the main patch.
[3] Run step 1 again. This time the tests should all pass.
Kyle M Hall [Wed, 12 Feb 2014 12:47:46 +0000 (07:47 -0500)]
Bug 11746 - Add edit item links to record details page
In order to edit a specific item right now, one must select the edit
pulldown, then choose edit items, the click the edit link for the
particular item the librarian wishes to edit. It would be much more
convenient to have an edit link for each specific item in the items
table on the record details page.
Test Plan:
1) Apply this patch
2) View the record details for a record with items
3) Click the edit link for a particular item
4) Note that you are taken immediately to the item editor
for this particular item
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Havilah Lyon <havilah@aflibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d8b7e635e01175bcb4c90777ee3e080d4301db79) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Wed, 19 Feb 2014 20:53:13 +0000 (15:53 -0500)]
Bug 9677 - Style button on notices and slips page with Bootstrap
The toolbar button on the Notices & Slips page isn't styled with
Bootstrap as other toolbar buttons are. This patch corrects this.
The patch also removes some obsolete CSS.
To test go to Tools -> Notices and Slips. The toolbar button should look
correct and work correctly.
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
"yui-menu-button" is not contained in tt files.
Owen Leonard [Fri, 7 Feb 2014 15:30:19 +0000 (10:30 -0500)]
Bug 11709: revisions to Bootstrap OPAC lists interface
This patch makes some revisions to the lists template:
- Removed the old prog theme breadcrumbs from the List edit screen.
- Added New/Edit/Delete controls to the list view in cases where the
list is empty.
- Corrected some breadcrumb logic.
To test, apply the patch and edit an existing list. You should see a
heading "Editing [list name]".
If necessary create a list with zero items on it. View the list. You
should see New/Edit/Delete links above the message about the list being
empty.
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2d0347c787108657e047c00873e227c8bb043bfc) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 27 Jan 2014 14:21:15 +0000 (09:21 -0500)]
Bug 11618: ensure jQuery timepicker is picked up by the i18n toolchain
We handle internationalization of the jQuery datepicker by adding
language configuration strings to calendar.inc which can be processed by
the translation script. This patch adds a similar configuration file for
the timepicker.
This patch also upgrades the timepicker plugin to the latest version,
minified, and places it outside the prog template directory for global
use. The path in templates has been updated accordingly.
CSS has been added to more completely hide the controls for seconds,
milliseconds, and microseconds.
To test, apply the patch and clear your cache so that the browser
loads the new version of the jQuery plugin. Confirm that date and time
selection still function correctly on the circulation page, the patron
detail page, and the offline circulation page (circ/offline.pl).
Test at least one datepicker instance which does not use the
timepicker.
Run translate update on a po file and confirm that the timepicker
strings are now present.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Works as expected, no regression found.
Owen Leonard [Wed, 12 Feb 2014 17:19:02 +0000 (12:19 -0500)]
Bug 11753 - Replace jQuery qTip plugin with Bootstrap tooltip on patron search form
The qTip plugin is out of date and incompatible with recent versions of
jQuery. This patch replaces use of qTip on the patron search form with a
Bootstrap tooltip implementation.
To test, apply the patch and view /cgi-bin/koha/members/members-home.pl
- Expand the patron search form by clicking the [+]
- Change 'search fields' from 'Standard' to 'Date of birth'
- A tooltip should appear giving details about the date format required
- Change the 'search fields' to something else. The tooltip should not
appear.
Revision: Removed inclusion of qTip plugin from global header include.
The other instance of qTip usage occurs on a page which loads the plugin
separately.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 432fce68eab71059ce797cbd6ee26a340009a208) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Tue, 18 Feb 2014 20:59:56 +0000 (20:59 +0000)]
Bug 11772: (follow-up) make warning about no active currency a link to currency setup page
This patch standardizes the name of the currency and exchange rates
administration page (although I note that the breadcrumbs on that
page are inconsistent) and makes it a link.
Marc Véron [Sat, 15 Feb 2014 15:19:04 +0000 (16:19 +0100)]
Bug 11772: Show warning on About page:System information if no active currency is defined
This patch displays a warning on the About page when no active currency
is defined.
Test plan:
1)
Make sure that no currency is defined as active
(Home › Administration › Currencies & Exchange rates › Currencies)
2)
Go to Home › About Koha > System information
Result: No warning issued.
3)
Apply patch and reload About page
Result: Warning issued.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9e01b7c1d6c32dfd9ae0af4e708ca598303fbcf1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Mon, 6 Jan 2014 16:54:19 +0000 (16:54 +0000)]
Bug 11310: update the XSLT for the Bootstrap theme
When the Bootstrap theme was started, the XSLT directory
was copied over from the prog theme. However, it was not
kept up to date with respect to changes to prog's XSLT.
This patch rectifies the problem by copying over the
current state of prog/en/xslt to bootstrap/en/xslt. As
a consequence, the following bugs or enhancements should
now be reflected in the Bootstrap theme:
[1] Apply the patch and ensure that OPACXSLTDetailsDisplay
and OPACXSLTResultsDisplay are set to 'default' and that
OPAC theme is set to 'bootstrap'.
[2] Ensure that OPAC results and bib details look OK.
[3] To be really thorough, run through the test plans for the
other bugs referenced by this patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit cd02934c6baf9d237b17f8348c83bf7e248d5551) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Wed, 5 Feb 2014 17:16:10 +0000 (12:16 -0500)]
Bug 11692: fix display of additional bib information in OPAC "most popular" pag
The template for the OPAC's "most popular" page includes several
variables which are not passed by the script, including
biblioitems.size. This patch adds the right columns to the query and
standardizes the output somewhat based on non-XSLT opac-detail.
To test, apply the patch and view the "most popular" page in both prog
and bootstrap. You should see correct publisher, copyright, pages, and
size information.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested in all three themes and works lovely
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves the bibliographic display on the 'Most popular' page
in the OPAC. Passes all tests and QA script.
To test you must have existing holds on your account. Log into the OPAC
and view the holds tab on the "your summary" page (opac-user.pl).
Resize the browser window until the table switches from a regular table
layout to a vertical column. Only when the view is narrow enough does
the affected label appear:
Pick up location: [library name]
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit dcdd0888a49d679d44fe7f90d83416f746d79c91) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 21 Feb 2014 20:27:41 +0000 (15:27 -0500)]
Bug 11821: disable catalog edit menu items and provide explanations when actions cannot be done
Biblio edit menu items which are disabled should trigger a tooltip
on hover and an alert on click with explanations. This patch implements
this for the relevent menu items.
To test, apply the patch for Bug 11829 if necessary. Find a record which
has no items attached. Test the following views:
- Normal
- MARC
- Labeled MARC
- ISBD
- Items
Test these Edit menu items:
- Edit items in a batch
- Delete items in a batch
- Delete all items
Hovering over these menu items should trigger an explanatory tooltip.
Clicking the menu items should trigger a similar alert.
Next, locate a title with items attached. On the same pages above, test
the Edit -> Delete record menu item. Hovering should trigger an
explanatory tooltip. Clicking it should trigger a similar alert.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works nicely.
Sophie Meynieux [Fri, 14 Feb 2014 11:10:32 +0000 (12:10 +0100)]
Bug 11760: In notices, output road type description rather than code
Test plan :
- Define a notice containing <<borrowers.streettype>>
- Trigger an event that generate this notice
Without patch <<borrowers.streettype>> is replaced by ROADTYPE
authorised value code. With the patch it is resplaced by its
description
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, passes tests and QA script.
Note: it seems it's not possible currently to use B_streettype from
the interface, but it might be worth adding it as a follow up for later
use.
Galen Charlton [Fri, 21 Feb 2014 16:08:01 +0000 (16:08 +0000)]
Bug 7372: (follow-up) remove last traces of roadtype table and admin pages
This patch removes the DBIC schema class for the 'roadtype' table
and staff interface templates that are no longer reachable with
the removal of the road type administration page. It also removes
the creation of the table during installation.
Jonathan Druart [Wed, 23 Oct 2013 12:27:45 +0000 (14:27 +0200)]
Bug 7372: Move road types from the roadtype table to the ROADTYPE AV
Currently road types are stored in a specific table in DB. Moreover, an
admin page is present in order to manage them.
This patch proposes to remove this table and this page in favour of a
new authorised value category 'ROADTYPE'.
This patch:
- adds a new AV category 'ROADTYPE' (created from the roadtype table
content).
- remove the roadtype table.
- remove the .pl and .tt file admin/roadtype
- remove the 2 routines C4::Members::GetRoadTypes and
C4::Members::GetRoadTypeDetails
Test plan:
1/ Execute the updatedatabase entry and verify existing roadtypes are
now stored in the AV 'ROADTYPE'.
2/ Verify you can add/update a streettype for patrons.
3/ Verify on following pages the streettype is displayed in patron
information (top left):
circ/circulation.pl
members/memberentry.pl
members/moremember.pl
members/routing-lists.pl
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a691ebc3f1b9a4b9075fc3f1b798a145fbd01244) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Conflicts:
installer/data/mysql/updatedatabase.pl
Colin Campbell [Wed, 14 Aug 2013 15:21:26 +0000 (16:21 +0100)]
Bug 10729: Add phrases configuration for ICU
Add a separate phrases-icu.xml for phrase indexes
The file is based on that distributed with zebra
with a couple of additions to reflect Koha usage
This patch adds a separate tokenizer variable
for phrase indexes so that default.idx is
correctly rewritten for sites using icu
indexing
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- Applied patch
- perl Makefile.PL --prev-install-log ../koha-dev/misc/koha-install-log
- make upgrade
- Restarted Zebra server
- Did a full reindex of bibliographic and authorities
- Checked various searches
- Links records to authorities
- Checked created links work correctly
I couldn't find a regression with this patch.
Passes all tests and QA script.
Galen Charlton [Fri, 21 Feb 2014 18:14:05 +0000 (18:14 +0000)]
Bug 10012: remove last traces of NoZebra
This patch removes the last traces of NoZebra:
[1] The DBIC schema class for the nozebra table
[2] References to the NoZebra and NoZebraIndexes sysprefs
in the Italian SQL scripts.
[3] Deleting the NoZebraIndexes syspref if it's still present.
To test:
[1] Verify that after applying the patch and running the DB upgrade,
that "NoZebraIndexes" is no longer to be found in the
systempreferences table.
[2] Verify that "nozebra" is not referenced anywhere in the source
code except for the database update scripts.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
(cherry picked from commit ffb9e312a956ceb5e3b57c34bc6f5b055b494f5a)
Jonathan Druart [Tue, 4 Feb 2014 11:15:42 +0000 (12:15 +0100)]
Bug 11675: check allocated total correctly when editing a fund that has a parent fund
The sth was created before the query.
The query was modified after the sth creation and an error was raised.
Test plan:
0/ Don't apply the patch
1/ Create a budget A (amount=1000)
2/ Create a fund A1 (amount=1000)
3/ Create a child fund A11 (amount=1000)
4/ Edit A11 and change the amount to 2000
You are able to do it, an error appears in the Koha log:
"check_parent_total.pl: DBD::mysql::st execute failed: called with 2 bind
variables when 1 are needed"
5/ Apply the patch, edit A11 and save. You get an error
6/ Edit A11 and change the amount to <=1000
7/ Verify that there is no regression on adding/removing/editing budgets
and funds.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described, no regressions found.
Jonathan Druart [Mon, 23 Dec 2013 08:58:30 +0000 (09:58 +0100)]
Bug 10837: make it possible to export serial claims as CSV even when no notice defined
On the serial claims page, it is possible to export (using a CSV
profile) or claim 1+ serials.
The checkboxes are not shown if the claiming notice is not defined.
So it is not possible to export claims.
Test plan:
- delete your notice "claimissues"
- go on the serial claims page
- verify that you are able to export them as CSV
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described and enables use of the export
funtionality even if you are not using the email notifications.
Exporting the serials will also set the claim date.
Passes QA script and tests.
Jonathan Druart [Wed, 5 Mar 2014 11:06:47 +0000 (12:06 +0100)]
Bug 11755: ensure that SearchOrders returns booksellerid
The SearchOrders routine should return the booksellerid and this
patch adds it.
This fixes several problems:
[1] The link to the vendor on the order receive page breadcrumbs
was broken.
[2] The tax calculation in finishreceive.pl didn't run.
[3] The item booksellerid field never got updated during
receipt.
Booksellerid was returned before bug 10723.
Quick test plan:
Go on orderreceive.pl and verify that the vendor link is correct.
Followed test plan. Vendor link is now correct. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 1e0375e91c71ceb99d255a5789d82b1257f336b4)
Galen Charlton [Tue, 11 Mar 2014 14:57:26 +0000 (14:57 +0000)]
Bug 10777: (follow-up) improve CSS3 for Zebra-striping report email output
This patch improves the CSS used to attempt to Zebra-stripe the
output of emailed reports. This will work with some email clients,
but other email clients (e.g., Gmail) don't handle style elements in the
body or head element.
Bug 10777: email HTML reports with the proper Content-Type
The misc/cronjobs/runreport.pl allows for sending html reports
via email. The problem is that the Content-Type isn't set to
text/html, which means that the generated html email isn't
displayed properly.
This patch set the Content-Type, and also adds a tiny bit of
CSS to potentially alternate row colours (just to make long
reports a bit easier on the eye!)
TEST PLAN
----------
1. Run the script similar to this:
./misc/cronjobs/runreport.pl --format=html --to=YOUREMAIL --subject="Bad Formatting!" REPORTNUMBER
2. Look at the email - the html code should by visible and ugly.
3. apply the patch
4. Run the script again.
5. Look at the email - the data should look nicer now.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 25076dec54f06b6a7938f4a6cda0a80a1d3d51e4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin SOMERS [Fri, 10 Jan 2014 10:42:06 +0000 (11:42 +0100)]
Bug 11516: make OPAC search term highlighting work in results browser
When OpacHighlightedWords syspref is on, the current search terms are
highlighted in results and detail pages.
This workes in detail page with the URL param 'query_desc'.
This parameter must be managed in results browser (appears when
OpacBrowseResults syspref is on) links.
This patch adds query_desc parameter in results list and changes next
nd previous links to be build into TT instead of perl to manage
query_desc parameter only into TT.
Test plan :
- Edit sysprefs : OpacHighlightedWords on, OpacBrowseResults on.
- Perform a search with a term existing into title
=> You see the term highlighted in search results
- Go to detail of a result with highlight
=> You see the term highlighted
- Click on "Next"
=> you see query_desc in URL, and if search term is present it is
highlighted
- Same for "Previous"
- Click on "Browse results"
- Click on a result
=> you see query_desc in URL, and if search term is present it is
highlighted
Signed-off-by: Aurélie <aurelie.fichot@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9d9a002432554913bc21f91cae031b3afa9077f9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolyn SOMERS [Tue, 19 Nov 2013 10:21:13 +0000 (11:21 +0100)]
Bug 3445: add more indexes on the action_logs table
This patch adds database indexes for action_logs table to speed up the
"log viewer" page.
Removes the existing index on timestamp+user to add an index on each
column since search colums are separately defined in log viewer form.
Test plan:
- Update database
- Play with log viewer : /cgi-bin/koha/tools/viewlog.pl
- Perform searches with only one filter defined
- Also check you see indexes with SQL query :
SHOW CREATE TABLE action_logs
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Rephrased the updatedatabase message a bit:
Add indexes to action_logs table
Passes all tests and QA script.
Jonathan Druart [Thu, 5 Dec 2013 14:30:42 +0000 (15:30 +0100)]
Bug 11343: The max number of items to process in a batch is hardcoded
Until now, the maximum number of item records to process in a batch was
hardcoded to 1000.
This patch adds a syspref MaxItemsForBatch in order to allow to adapt
this value.
Test plan:
- set the pref to 2
- try to delete a batch of 3 items: they are not displayed
- try to modify a batch of 3 items: you are not allowed to do that
- set the pref to 1000 and try again. Now items are displayed and you
are allow to modify them.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 0e8f85a3b344ed1900c7b5523c1fb5aa264ab89e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Conflicts:
installer/data/mysql/updatedatabase.pl
Galen Charlton [Mon, 10 Mar 2014 18:42:25 +0000 (18:42 +0000)]
Bug 10955: (follow-up) improve usage information
This patch improves rebuild_zebra.pl's usage help
by explaining when --skip-deletes should be considered
and noting that it should be used in conjunction with
a cronjob to process deletions after hours.
Kyle M Hall [Thu, 26 Sep 2013 16:47:13 +0000 (12:47 -0400)]
Bug 10955 - Add ability to skip deletions in zebraqueue
It seems that record deletions can cause extreme slowdowns for Koha
installations with extremely large numbers of records. It would be
helpful to be able to skip record deletions when processing the
zebraqueue with rebuild_zebra.pl so the deletions can be processed with
a lower frequency.
Test Plan:
1) Disable any zebra indexing cronjobs you may have
2) Delete a record
3) Note the operation recordDelete in the zebraqueue table having done = 0
4) Run misc/migration_tools/rebuild_zebra.pl -b -z --skip-deletes
5) Note the delete still has done = 0
6) Run misc/migration_tools/rebuild_zebra.pl -b -z
7) Note the delete now has done = 1
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested for authorities, no problems found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
RM note: this is at best a work-around, and I will emphasize that
--skip-deletes should be used only when absolutely necessary.
I hope that --skip-deletes can go away at some point soon, but
that may depend on changes to Zebra.
Galen Charlton [Mon, 10 Mar 2014 18:13:16 +0000 (18:13 +0000)]
Bug 10452: (follow-up) remove duplicate check of damaged status
While reviewing the main patch for this bug to verify that the
holds queue routines and C4::Reserves had the same conception of
when a damaged item could fill a hold request, I noticed that
GetItemsAvailableToFillHoldRequestsForBib() duplicated the code
for adding an SQL clause to filter out damaged items. This patch
removes the duplication and improves the POD for that routine.
Kyle M Hall [Fri, 17 Jan 2014 14:05:40 +0000 (09:05 -0500)]
Bug 10452: [QA Followup] - Unit tests
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Also checked
t/db_dependent/Holds.t
t/db_dependent/HoldsQueue.t
Tested holds triggering with different settings of
AllowHoldsOnDamagedItems. Works as described.
Kyle M Hall [Wed, 12 Jun 2013 14:09:25 +0000 (10:09 -0400)]
Bug 10452: make AllowHoldsOnDamagedItems control using damaged items to fulfill holds
AllowHoldsOnDamagedItems will stop item-specific holds from being placed
on damaged items, but does not stop Koha from using damaged items to
fill holds. This seems like incorrect behavior.
Test Plan:
1) Set 'AllowHoldsOnDamagedItems' to "Don't Allow"
2) Pick an item, set it to damaged
3) Place a bib-level hold on this item's record
4) Scan the item though the returns system
5) Koha will ask to use this item to fill the hold, click "ignore"
6) Apply this patch
7) Repeat step 4
8) Koha will not ask to use this item to fill the hold
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit cb45d4c2184622e15239077dd1c535a13abc53ce) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 7 Feb 2014 17:09:08 +0000 (12:09 -0500)]
Bug 11713 - Use new DataTables include in course reserves templates
This patch modifies two course reserves templates to use the new
DataTables include. This simplifies the inclusion of assets and updates
to the latest DataTables version. Also included:
- Adds a sorting filter on the course reserves detail table to excluding
articles from sorting.
- Corrects the styling of toolbar buttons (buttons should have btn and
btn-small classes).
To test you must have UseCourseReserves enabled and have multiple
existing courses, at least one of which should have items on reserve.
1. View the list of courses. Table sorting should work correctly. The
"new course" button should look consistent with other staff client
toolbar buttons.
2. View the list of reserves on a course.
- Toolbar buttons should look consistent with other staff client
toolbar buttons.
- Sorting should work correctly, excluding sorting on the Edit,
Remove, and "Other course reserves" columns.
- Titles on reserve which begin with an article should be sorted
correctly with article excluded
- Test sorting with item-level_itypes on and off.
- Test sorting using a patron whose permissions include various
combinations of add_reserves and delete_reserves
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e0b13056b24655e52bb80543995ff9efe0470e34) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Julian Maurice [Thu, 6 Feb 2014 14:42:08 +0000 (15:42 +0100)]
Bug 8918: (follow-up) allow t/db_dependent/Reserves.t to pass if marcflavour is UNIMARC
Set marcflavour to MARC21 to make tests pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works for MARC21. But I would prefer a better fix for UNIMARC.
Will send a follow-up for that.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit adc09764bc90c34300444c5ea43bfd040f0d571d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Thu, 30 Jan 2014 13:16:03 +0000 (14:16 +0100)]
Bug 8918: (follow-up) more unit tests for CalculatePriority
Adding a few unit tests, including the following situations:
Placing a hold when there is a wait.
Placing a hold when there is a future hold.
Calculating priority with future date.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9b9fd8597945d221d9d89d6ae6517c0c65179232) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 8918: (follow-up) improve descriptions of two related sysprefs
Updating pref descriptions for ReservesNeedReturns and ILS-DI:AuthorizedIPs.
Just sideway related to this report, but not important enough to separate.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5372082724002476bc7565f7c66a7e6aaa06c24b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Julian Maurice [Mon, 15 Oct 2012 12:06:04 +0000 (14:06 +0200)]
Bug 8918: Fix reserve priority in ILS-DI
The priority of new hold requests was not calculated when using ILS-DI.
A new routine is added, C4::Reserves::CalculatePriority(), to calculate
the priority prior to placing a request.
A separate bug report, 11640, covers the changes in reserves to
use this new routine more generally.
This patch does therefore only affect ILS-DI.
Note: ILS-DI already allows you to generate multiple holds on a biblio or
item for the same patron. This patch does not change that behavior.
Test plan:
[1] Place multiple holds using ILS-DI HoldTitle service:
/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&request_location=test
Check the priority.
[2] Do the same using HoldItem service:
/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&item_id=ITEMNUMBER
Check the priority again.
[3] Use a biblio with multiple items. Place item level holds on both.
Check in one of these items in another branch. Confirm transfer.
Check in the other item in the original branch. Confirm hold.
Now you have a waiting and a transit hold.
Test HoldTitle and HoldItem service again a few times.
[4] Enable AllowHoldDateInFuture and add a future hold.
Now test HoldTitle and HoldItem again and check if these holds are
inserted before the future hold (lower priority).
January 29, 2014: Rebased this patch and amended it to make a distinction
between fixing the ILS-DI bug and using the new routine.
Updated commit message and test plan (marcelr).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 3e344d7e0718e5a8ac810ca5235f68c1e6d3f370) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Mark Tompsett [Mon, 21 Apr 2014 01:13:26 +0000 (21:13 -0400)]
Bug 12115: follow-up fix for tools/inventory's output_pref issues
This should correct issues with the output_prefs in the
compareinv2bar logic section of tools/inventory.pl
It is a follow up to bug 11253.
TEST PLAN
---------
NOTE: There should be no distinguishable difference before and
after the patch. This corrects a works by accident bug.
Back up DB.
Create a small barcode file from books in a given branch.
Set I18N/L10N system preference of dateformat to mm/dd/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in mm/dd/yyyy format.
Set I18N/L10N system preference of dateformat to yyyy-mm-dd.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in yyyy-mm-dd format.
Set I18N/L10N system preference of dateformat to dd/mm/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in dd/mm/yyyy format.
Apply patch
Restore DB (so results should be comparable to the first result)
Repeat the three testing blocks above.
There should be no visible difference.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 40378d4a13e9d89bd84da90e9b6c0c5a237af1ef) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
projects / koha.git / log