Katrin Fischer [Sat, 1 Mar 2014 08:33:27 +0000 (09:33 +0100)]
Bug 11828: (follow-up) add new option to OrderPdfFormat
To test:
- Check appearance of the OrderPdfFormat system preference
It will offer a pull down with options, including
"German 2-page"
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 6372689f5dc7f0e9d34ffef3ad0c2a1ab6d6fb58) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Katrin Fischer [Wed, 26 Feb 2014 16:50:10 +0000 (17:50 +0100)]
Bug 11828: Add German translation of layout2pages PDF template
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout2pagesde
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check everything is translated into German and the formatting/layout
looks ok
Followed test plan and compared English with German printout.
German version is OK.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ffeb666994327b97e26bc372fd574d05a40e8336) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 069b6e62e5c491db1630e8bbbed7e17fd90aa86d)
Mark Tompsett [Thu, 3 Apr 2014 00:22:44 +0000 (20:22 -0400)]
Bug 11885: (follow-up) make default styling consistent with previous look
Jonathan Druart raised the following three issues:
1/ subtags was bold before patch
2/ 1 dash existed between tag and tag name
3/ A space has been added ("606 #1 - Sujet nom commun"
becomes "606 # 1 Sujet nom commun", "101 ## - Langue"
becomes "101 # # Langue")
This patch addresses them in the following way:
1/ You will note that @ was not bold on the 0 tab.
Every other tab were bold. By making the similar template
into a procedure based on the 0XX tab, bolding was lost.
This patch bolds all subtags including the @, so that
the visible change is minimized.
2/ The dash was programmatically added in at the code stage
previously. This bug fix splits the the single concatenation
mess into parts which can be styled. This puts the dash back
into the template. However, it should be noted that the
spacing for the 0 tab's tag and tag description will have an
extra space after the hypen that was lacking before.
3/ <span>...</span><span>...</span> is different than
<span>...</span>
<span>...</span>
The later puts that extra space. This patch fixes that.
See comment 1 for the test plan.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described.
Small koha-qa errors fixed in followup
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 377dbfc73fb2a06b8a0d50731e2c8ba14968d68e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 86b80a5ba8df5b8e270706b8494311a92819fe78)
Pasi Kallinen [Tue, 4 Mar 2014 06:57:11 +0000 (08:57 +0200)]
Bug 11885: fix inconsistent HTML in MARC Details
In Catalog > MARC Details, the HTML in the different tabs is slightly
inconsistent and doesn't differentiate different elements, making CSS
styling complicated or impossible:
* tab 0 has <p class="subfield_line"> whereas all the other tabs
have just <p>
* all other tabs wrap the subfield character in <b> tags, except
for tab 0
* the MARC tag title is a single div with the tag, the indicators
and the field description.
Attached patch folds all the tab outputs into a single TT BLOCK,
which is then reused. It also marks the separate parts of the tag
title in their own spans.
The output should be nearly identical to previous behaviour, minus
a dash from the tag title descriptions - it was used to separate
the tag from the description. The description can now be styled
separately from the tag itself, so the dash can be added with CSS,
if necessary.
Revised test:
1) Find a biblio
2) Edit the record so that there is something in every tab (0-9).
3) Save and then click 'MARC' in the left pane to view the
MARC details.
4) Note the contents of each tab.
5) Apply patch
6) Compare the MARC details output to what was noted. Should
be the same, minus a dash in each of the tag title descriptions.
Signed-off-by: Pasi Kallinen <pasi.kallinen@pttk.fi> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0ea17a6a7689e7fb3d60ebb72cac72eefb142d8a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 18a5f1cb289261ffe613d7df22b428e12a5be072)
Srdjan [Fri, 1 Nov 2013 08:24:11 +0000 (21:24 +1300)]
Bug 11184: correct attribute cloning for the patron editor
This patch fixes Perl warnings logged when setting up the
patron attribute form in the patron editor.
To test - Patron details entry page:
* Have ExtendedPatronAttributes enabled. Check that "Additional
attributes and identifiers" section behaves.
* Verify that editing and saving a patron record does not
result in the following sorts of entries in the Apache log:
se of uninitialized value $_ in hash element at memberentry.pl line 798
Use of uninitialized value in anonymous hash ({}) at memberentry.pl line 798
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with different types of patron attributes:
- repeatable
- linked to an authorized value
- free text
Tested editing, adding, removing one of multiple, adding multiple,
etc. No regressions found.
Passes all tests and QA script.
Owen Leonard [Wed, 9 Apr 2014 13:08:27 +0000 (09:08 -0400)]
Bug 12056: fix untranslatable strings in calendar
In the calendar there are some strings in a JavaScript function which
are not properly wrapped in a function for translation. This patch
corrects this.
This patch also corrects some minor validation issues and spelling and
grammar issues, including those covered by Bug 12055.
To test, apply the patch and view the calendar in Tools -> Calendar.
When you hover your mouse over a day in the calendar you should see a
title tooltip indicating what kind of day/holiday it is and showing the
title of the holiday, if any.
To test that the strings are now being picked up for translation,
run translate update on a po file and confirm that the affected strings
are now present: "Weekly holiday," "Yearly holiday," etc.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well. New strings on translation file. No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Bug 9075: Rename "type" to "material type" on OPAC XSLT detail and results
The label Material type better describes what the icon presents.
It is based on leader values of the MARC record.
Revised Test Plan
-----------------
1) In the staff client, set the OPAC system preference
OPACXSLTDetailsDisplay to 'default' and save.
2) In the staff client, set the OPAC system preference
OPACXSLTResultsDisplay to 'default' and save.
3) In the staff client, set the OPAC system preference
opacthemes to 'bootstrap' and save.
4) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Type:"
6) Look at the biblio details
-- It should also display "Type:"
7) In the staff client, set the OPAC system preference
opacthemes to 'prog' and save.
8) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Type:"
9) Look at the biblio details
-- It should also display "Type:"
10) Apply the patch
11) In the staff client, set the OPAC system preference
opacthemes to 'bootstrap' and save.
12) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Material type:" this time.
13) Look at the biblio details
-- It should display "Material type:" this time.
14) In the staff client, set the OPAC system preference
opacthemes to 'prog' and save.
15) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Material type:" this time.
16) Look at the biblio details
-- It should display "Material type:" this time.
17) Run the koha qa test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Note: Just a simple string change. Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, works as advertised in staff, prog and bootstrap
OPAC.
Bug 9075: Rename "type" to "material type" on staff XSLT detail and results
The label Material type better describes what the icon presents.
It is based on leader values of the MARC record.
Revised Test Plan
-----------------
1) Set the Staff system preference XSLTDetailsDisplay to
'default' and save.
2) Set the Staff system preference XSLTResultsDisplay to
'default' and save.
3) Click 'Search the catalog' tab in the search area.
4) Search for something
5) Look for a biblio that has 942$c set to some type.
-- It should display "Type:"
Or take a result and modify it to have a 942$c.
6) Look at the biblio details
-- It should also display "Type:"
7) Apply the patch
8) Search for the same biblio again.
-- It should display "Material type:" this time.
9) Look at the biblio details
-- It should display "Material type:" this time.
10) Run the koha qa test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Note: This is a simple string substitution. Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4bdd8d9a69f72751f0429be5bc58afdd218a4bb0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 97d9b102fa2fc1a3cf6cee1356b288c0b0d0a15f)
Bug 12079: ensure that CheckReserves() includes reserve_id in its response
This patch modifies _Findgroupreserve so that its one caller,
CheckReserves(), would include the reserve_id field in the
hold request it returns.
Failure to include reserve_id in every circumstance resulted
in bug 11947. This patch is therefore a complementary fix for
that bug, but is not meant to preempt the direct fix for
that bug.
To test:
[1] Verify that t/db_dependent/Reserves.t passes.
[2] Verify that the following test plan taken from
the patch for bug 11947 works for this patch
*without* applying the patch for 11947:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors. Test pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 695fdebdee802387f45505a1350120727d3e2f7f) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 71efba230442c583d591f8107874cb10016c096a)
Bug 12071: improve generation of Z39.50 search links
This patch fixes two problems with the generation of
links to execute a Z39.50 search from the staff client
catalog and cataloguing search results page.
First, if using URI::Escape 3.30 or earlier, performing a simple search
with a double quote (e.g., "histoire algerie"), the Javascript is broken
in results page because of :
function GetZ3950Terms(){
var strQuery="&frameworkcode=";
strQuery += "&" + "title" + "=" + ""histoire%20algerie"";
Second, the encoding of non-ASCII characters in the search
term was broken.
This patch moves URI escaping from Perl to template with uri TT filter.
Test plan :
- To reproduce the issue with double quotes, the server
must be running URI::Escape 3.30 or earlier; the current
version of URI::Escape properly escapes double quote.
- In staff interface, perform a search with double quotes
that will return no result, ie "aaa xxx"
=> Without patch, javascript is broken
=> With patch, javascript is not broken
- Click on Z3950 button on results page
=> Without patch, the Title input is empty
=> With patch, the Title input contains the search terms
Additional test:
Do a search with something like äöü and then click Z3950
button on results page.
Without patch, encoding is broken in Z3950 form
With patch, encoding is correct.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a few tabs. Passes tests and QA script.
I can't reproduce the Javascript problem, but I can reproduce
the Z39.50 encoding problem and can detect no regression.
Kyle M Hall [Tue, 6 May 2014 12:49:15 +0000 (08:49 -0400)]
Bug 4068: ensure accepting a suggestion does not hide the 'pending' tab
Prior to this patch:
1) Moving a suggestion from status 'pending' to 'accepted
- After saving only tab 'accepted' is shown.
2) Moving a suggestion back from 'accepted' to 'pending'
- After saving only tab 'pending' is shown.
Test Plan:
1) Verify the bug by taking the actions listed above
2) Apply this patch
3) Verify the bug no longer exists
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It is not very elegant but I have nothing else to suggest.
Fridolin Somers [Tue, 17 Jun 2014 14:38:54 +0000 (16:38 +0200)]
Bug 12438 - Bad encoding in acquisition basket
We noticed a bad encoding (diacritics replaced by <?>) in acquisition basket when updating a server to Debian Wheezy.
We found it comes from a query containing biblio.title twice.
Maybe the mysql newer version creates this side-effect.
Test plan :
- Create an order on a record containing a diacritic in title
- Look at the basket : cgi-bin/koha/acqui/basket.pl?basketno=x
=> Without the patch the record title is bad encoded (with <?>)
=> With this patch the record title is well encoded
- Check also basket CSV export
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch!
Works as expected, passes tests and QA script. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Duplicated biblio.title is a (minor) bug, and should be removed.
The side-effect of it solving an encoding problem might be seen
as problematic: it hides a real problem.
The efforts on 11944 actually solve this encoding problem (11944
merged into master actually fixes this), so I'm pushing it, for
a short term solution for stable, with the hope that we will soon
have 11944 pushed.
BTW, non-diacritic but non-ASCII characters are not broken either.
Bug 10818: improve display and translatability of sysprefs OAI-PMH:ConfFile's description
This patch correct english display for OAI-PMH:ConfFile syspref,
and makes it's strings translatable
To test:
1) On Administration > System preferences > Web Services
OAI-PMH:ConfFile syspref doesn't have description before
file box. Text after that box is not translated.
2) Choose your prefered language, xx-YY, update po files
cd misc/translator
perl translate update xx-YY
3) Look into xx-YY-pref.po for any occurence of "YAML", there is none
4) Apply the patch
5) Update po files again
6) Look into xx-YY-pref.po, now there are 2 entries
7) Also reload page from 1) and check for text before
file box.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works for me as described, only changes YAML pref file.
Owen Leonard [Thu, 3 Apr 2014 12:38:08 +0000 (08:38 -0400)]
Bug 12034: standardize alerts referring to lists and list items
The staff client lists template contains a warning which differs from
the same warning in the OPAC. The OPAC version is correct because it
refers to a list rather than a shelf. This patch copies the OPAC version
to the staff client template.
This patch also corrects a few of other instances where the incorrect
term "shelf" is used.
To test, apply the patch and view a list in the staff client which is
populated with items. Check the box next to one or more items on the
list and click the "Remove selected" button. You should see the message,
"Are you sure you want to remove these items from the list?"
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0f7b89633ed9e5be611a4d6c981bf3065670ba1a)
Fridolin Somers [Fri, 20 Jun 2014 12:54:07 +0000 (14:54 +0200)]
Bug 12458 - Holidays calendar has wrong colors for weekly and yearly repeatable
In Tools / Calendar, the colors in the calendar for weekly and yearly repeatable are different from the color of the "Key" legend.
This patch sets the colors used in the "Key" legend to the cells if calendar.
Test plan :
- Go to Tools/Calendar
- Add a weekly repeatable holiday
- Check its color in calendar is the same as the text "Holiday repeating weekly"
=> Without this patch, it's green instead of yellow
- Add a yearly repeatable holiday
- Check its color in calendar is the same as the text "Holiday repeating yearly"
=> Without this patch, it's yellow instead of orange
- Check the color of others holydays types are OK
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I'd like to see today's date a clearly different color from the
weekly repeated holiday, because now they're close in color.
But this patch does exactly what it says and should so I'm signing
off.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Legend, headings and calendar colors now match.
No problems found.
Bug 11715: require authentication for various staff scripts
To test:
[1] Verify that item record creating and editing during the
acquisitions process continues to work.
[2] Verify that calling services/itemrecorddisplay.pl without
a valid user session fails.
[3] Verify that authentication is required for making a new
order from a suggestion, transferring an order, doing a
Z39.50 search from acquisitions, displaying the record
card view in the staff interface, and running the till
reconciliation report (/cgi-bin/koha/reports/stats.screen.pl)
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified all changed scripts are not accessible witout a valid
user session, but are with one.
Chris Cormack [Mon, 10 Mar 2014 21:56:53 +0000 (10:56 +1300)]
Bug 11715: require authentication for the cataloging Z39.50 search
To test:
1/ go to /cgi-bin/koha/cataloguing/z3950_search.pl when you are not
logged in, notice no log in is enforced
2/ Apply patch
3/ go to /cgi-bin/koha/cataloguing/z3950_search.pl notice you now need
to login
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Chris Cormack [Mon, 10 Mar 2014 21:51:00 +0000 (10:51 +1300)]
Bug 11715: Set the default of authnotrequired = 0 in get_template_and_user
To test:
Verify that pages in the OPAC and staff interface display correctly.
Note that there are cases where 'authnotrequired' was not passed
at all to get_template_and_user, so there may be pages that start
requiring authentication. Whether that is correct or not depends
on context.
Follow up patches are to remove all the unnessecary setting of this
value, so that the only places we set are when we do want
authnotrequired=1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Owen Leonard [Fri, 28 Feb 2014 19:48:36 +0000 (14:48 -0500)]
Bug 11877 - Eliminate use of deprecated jQuery .live() method
As of jQuery 1.9 the .live() method has been removed. A few templates
contain JavaScript which uses it. It can be easily replaced with .on().
This patch makes the correction.
To test, apply the patch and test the following pages:
- In the staff client, Administration -> OAI sets configuration:
Define mappings for an existing set. You should be able to add rows by
clicking the "OR" button. You should be able to delete or clear any
line by clicking the "Delete" link.
- In the staff client, view the details for any patron and click the
"Change password" button: In the change password form click the link
to fill the password fields with a random password. This link should
work correctly.
- If necessary enable OpacRenewalAllowed in system preferences. Log in
to the OPAC as a patron who has checkouts. On the patron summary page
(opac-user.pl) look for the "renew selected" and "renew all" links at
the top of the table of checkouts. Both these links should work
correctly. Test in prog and bootstrap themes.
Followed test plan. Same behaviour as without patch, i.e. patch OK Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described.
No Javasript errors found.
Note: The buttons on the form show up, even if no item shows the
checkbox. In my case the problem was that I had 0 renewals allowed
in the circulation rules. Maybe we could hide them, if no item
can be renewed.
Jonathan Druart [Mon, 17 Mar 2014 16:21:09 +0000 (17:21 +0100)]
Bug 11939: set active currency for non-English sample data
Revised Test Plan
-----------------
The following SQL commands were used to test this.
installer/data/mysql/en/optional/parameters.sql is part of the
first patch and didn't really need testing again.
installer/data/mysql/de-DE/optional/parameters.sql is not part
of the patch, but since I was playing with the script, which
is also attached here, it was included for good measure.
use kohadata;
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/pl-PL/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/es-ES/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/ru-RU/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/uk-UA/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/it-IT/necessari/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/de-DE/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/en/optional/parameters.sql
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ed10e5226cc8e9852dfee3f5520976695cb99412) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 0e6a85ad7c09eccc99fbce9af47d4ae9ddae4350)
Zeno Tajoli [Fri, 14 Mar 2014 10:38:07 +0000 (11:38 +0100)]
Bug 11939: set active currency when using English sample data
This patch offers a better default for currencies,
with USA dollar as default active currency.
To test the patch:
1)Install master without the patch, during web installation
select 'parameters.sql' file
2)Finish install and go to Administration -Currencies & Exchange rates
3)No active currency
4)Install master with this patch, during web installation
select 'parameters.sql' file
5)Finish install and go to Administration -Currencies & Exchange rates
6)Now USA dollar is the active currency
NOTE: This does solve the problem of everything being NULL for active,
and lacking an active value. It also corrects the description
of the optional item to check related to currencies.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
To test:
1) Do a fake translation to Armenian,
mkdir koha-tmpl/intranet-tmpl/prog/hy-Armn
2) Go to Administration > System preferences > I18N/L10N
3) Armenian description looks like the second string in Bug description
4) Apply the patch
5) Run updatedatabase.pl
6) Reload page, now description look as first string in
Bug description (it's the sixth letter, similar to 't')
Ammended patch, wrong column.
Signed-off-by: Holger Meißner <h.meissner.82@web.de> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes the English sample file for translations and includes
a database update to correct the string in existing installations.
Passes all tests and QA script.
This sql file tries to insert data into nonexistent tables.
It is useless and can be removed.
Test plan:
git grep sample_only_param_tables
should not return any result.
NOTE: This is basically a git rm. Simple patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
File is not used by the installers and it wouldn't work
with today's Koha for trying to insert data into non-existant
tables and tables with different structure.
Daniel Barker [Tue, 14 Jan 2014 20:57:19 +0000 (09:57 +1300)]
Bug 8168: Fixing header of non CSV files for overdue notices
This determines if the CSV header should be included or not and
then generates it as needed using the delimiter specified in the
delimiter system preference.
TEST PLAN
---------
1. make some overdues books
2. run the overdue notices script without the -csv
3. check emails notice csv header is in the email
4. apply the patch
5. run the overdue notice again
6. check email notice CSV header is absent
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a31210efd34dc7e3c65f8491c26c2d8f8fc36dfb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 48ee914631cb1ec889db8a15085f3519c20b2b7e)
In the results view for OPAC and Intranet search results, titles are
currently displayed in 245 $a $b $h order. In detailed view the titles
are displayed in the better 245 $a $h $b order.
This patch corrects the behaviour for NORMARC and MARC21: all now
display 245 $a $h $b.
To test:
- Find records containing 245 $a $b and $h fields.
- Compare the way they look in detail and results view in OPAC
(non-bootstrap) and intranet (you should see a discrepancies).
- Apply the patch.
- Re-check detail and results view: all should now look the same in
both OPAC (non-bootstrap) and intranet.
Signed-off-by: Jesse Weaver <pianohacker@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described.
Checked with Magnus Enger about the changes for the NORMARC
stylesheets and the changes are ok.
Bug 9114: Make frameworks import/export routines correctly use UTF-8
Currently both the import_export_framework.pl script outputs data with
Perl's default encoding, ISO-8859. This patch properly sets
the binmode to UTF-8 when exporting SQL and CSV files using the PerlIO
layer (":encoding(UTF-8)") for STDOUT.
To test:
Export step test
- Use some ASCII character(s) with DIACRITICS in some field description
in a chosen framework.
- Export the framework at Administration > MARC frameworks
- Run this to check the file is ISO-8859 encoded:
$ file export_XXX.csv
export_XXX.csv: ISO-8859 text, with very long lines
(Note: try SQL and other output formats too. But not ODS)
- Apply the patch
- Export the framework again (change the name), and test encoding:
$ file export_XXX_2.csv
export_XXX_2.csv: UTF-8 Unicode text
Import step test
I assume you have two files, export_XXX.csv (ISO-8859 encoded) and
export_XXX_2.csv (XXX will depend on your framework's code)
- Reset your testing branch to master
- Import export_XXX.csv
- The string with non-ASCII chars is truncated at the first non-ASCII
char's position (Note: this is the current behaviour).
- Import export_XXX_2.csv
- The non-ASCII chars are broken, the logs show errors on non-UNICODE
chars. (Note: even thou UTF-8 is the expected encoding it is
treated as ISO-8859).
- Apply the patch
- Import the good (UTF-8 as expected) file and check everything worked
as expected.
No double encoding should occur with either combination of formats.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
I put some Norwegian and accented letters in a fremawork to test.
Before the patch, the exported CSV came out as ISO-8859, after the
patch it came out as UTF-8. ODS and XML (viewed in LibreOffice)
both looked good, before and after the patch.
Importing the ISO-8859 CSV cut off the strings at the first non-ASCII
char. Importing the UTF-8 CSV worked as epected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes tests and QA script.
Nicolas Legrand [Thu, 13 Mar 2014 09:40:27 +0000 (10:40 +0100)]
Bug 11934 - Replace given by if-else statements
To test:
[1] Verify that prove -v t/db_dependent/Circulation_issuingrules.t
passes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
replaces given-when with if-elsif-else constructs.
Tests still pass and code looks good.
Sophie Meynieux [Mon, 10 Mar 2014 16:07:07 +0000 (17:07 +0100)]
Bug 11647: (follow-up) test if user is logged in before proposing to subscribe or unsubcribe from serial routing list
To test :
1) Search for a subscription with patron notification active
2) If you're not logged in, a message warns you that you must log
in to subscribe to notification on new issues
3) If you log in, and have not yet subscribed to this routing list,
you've got a link to subscribe
4) Once you have subscribed, you've got a link to unsubscribe
5) If you log out, you've got a message saying you must log in to
subscribe
6) If you log in with another user, you've got the link to subscribe
or unsubscribe depending on if he has already subscribed.
Signed-off-by: remy juliette <remy.gonzalves@iepg.fr> Signed-off-by: Aurelie Fichot <aurelie.fichot@iepg.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b056f93c4d33a9a56d56bbb081924f7c4c974a79) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit a5588825138f2156682342eb012e3f08d65441d2)
Sophie Meynieux [Fri, 31 Jan 2014 11:22:05 +0000 (12:22 +0100)]
Bug 11647: require that user log into OPAC to request email subscription notifications
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: remy juliette <remy.gonzalves@iepg.fr> Signed-off-by: Aurelie Fichot <aurelie.fichot@iepg.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Instead of hiding the feature completely, now a message
tells the user to login to subscribe to the email
notifications.
Fridolin Somers [Wed, 5 Mar 2014 13:26:14 +0000 (14:26 +0100)]
Bug 11366: make "no group" option in acq basket group drop-down translatable
in Acq baskets, there's a pull-down for basket groups. One of the
entries in that pull-down is "No group", which is untranslatable.
This string is hard-coded in Perl.
This patch removes the string from Perl to set it has first option
in select. To allow it to be default value, the option "Add new group"
is moved to last position.
Test plan :
- Go to a closed aquisition basket in no basket group :
cgi-bin/koha/acqui/basket.pl?basketno=x
=> You see "No group" selected in combobox "Basket group"
- Cick on this combobox
=> You see "No group", then existing basket groups and then "Add new
group"
- Select a basket group and click on "change basket group"
=> You see the basket group name in combobox
Use translation, for example fr-FR
- go to src/misc/translator
- run : perl translate update fr-FR
=> You find in PO file :
#: intranet-tmpl/prog/en/modules/acqui/basket.tt:365
#, fuzzy, c-format
msgid "No group"
msgstr "Nom de groupe"
- remove ", fuzzy" and correct translation : "Pas de groupe"
- run : perl translate install fr-FR
- Go to translated aquisition basket page
=> You see translated option in combobox
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 21e6518d32477fa1fe59da64d735f3f07ae49bcd) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 1b760f8e4df32f73861b96ffc5ea4e2d0bd196a5)
Fridolin Somers [Wed, 26 Feb 2014 10:03:18 +0000 (11:03 +0100)]
Bug 11845 - set overlay and import status translatable in addorderiso2709.tt
In addorderiso2709.tt, the text for overlay and import status come from
database and was not translatable. Ths patch fixes that.
Same as Bug 10170.
Test plan :
- Go to acquisition module
- Display an open basket
- Click on "From a staged file"
- Look at table
=> Without patch, you see codes in "Status" column : staged, imported, ...
=> With patch, you see descriptions in "Status" column : Staged, Imported, ...
- Click on a "Add orders"
- Look at table
=> Without patch, you see codes in "Match?" column : no_match, auto_match, ...
=> With patch, you see descriptions in "Match?" column : No match, Match found, ...
Signed-off-by: Nathalie CHATILLON <nathalie.chatillon@uhb.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is an improvement. Only the translation of auto_match as Match found
could perhaps be further improved.
Kyle M Hall [Mon, 13 Jan 2014 17:39:51 +0000 (12:39 -0500)]
Bug 11531: make it possible to edit transport cost for a new libraries
If you are using the transport cost matrix, and you create a new
library, you cannot edit the fields for this library!
Test Plan:
1) Enable the transport cost matrix
2) Set some transport cost values in the matrix
3) Save the matrix
4) Create a new library
5) View the transport cost matrix again
6) Note the uneditable fields for the new branch
7) Apply this patch
8) View the transport cost matrix again
9) Note you can now edit the fields for the new branch
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Galen Charlton [Wed, 26 Feb 2014 16:45:09 +0000 (16:45 +0000)]
Bug 11459: use drop-down to set OrderPdfFormat syspref
This patch converts the OrderPdfFormat to a choice.
To test:
[1] Look at OrderPdfFormat in the system preferences editor. Verify
that there is a drop-down giving a choice among the three PDF
basketgroup printing formats.
[2] Change the OrderPdfFormat setting and print a basketgroup. Verify
that the chosen template is used.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
I followed the test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves usability of the OrderPdfFormat system preference.
Works as described, only changes YAML file.
Owen Leonard [Mon, 24 Feb 2014 16:35:52 +0000 (11:35 -0500)]
Bug 11832: fix JavaScript error on staff client place hold screen if record has no items
If a hold operation is blocked because the title has no items attached
the patron search autocomplete JavaScript triggers an error. This patch
modifies the template so that the JS is loaded only when items are
present.
To test, find a title which has no items attached. View the holds page
for that title. There should be no JavaScript error. Patron search
autocomplete should still work correctly for titles which have items
attached.
Deleted all items from a biblio record. Clicked the holds tab and
confirmed using firebug Javascript error occurs. Applied patch,
confirmed that the Javascript error described in comment 1 no
longer happens. Went to another biblio with items, and confirmed
patron auto-complete still functions.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0b5b8cef348b61761305dd0bbc574699404c7c69) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 07dc616de5a7483f4fe061c046c55ae7d880c7cb)
Owen Leonard [Tue, 25 Feb 2014 20:55:03 +0000 (15:55 -0500)]
Bug 11833 - fix filtering on saved report subgroup
Filtering the list of saved reports by subgroup doesn't work because the
filtering JavaScript was not updated when the table columns changed with
Bug 3134. This patch corrects the target column for filtering.
To test you must have multiple saved reports within one group, and at
least one of those in a subgroup.
- Apply the patch and go to Reports -> Use saved.
- Click the tab for the group which contains your reports.
- Choose the subgroup you want to filter on from the subgroup dropdown.
The list of reports should be correctly filtered by your subgroup.
NOTE: It seems weird to have the number of columns displayed change
when filtered, but this patch does correct the filtering.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Jesse Maseto [Mon, 10 Mar 2014 13:39:22 +0000 (09:39 -0400)]
Bug 11695 - Fixed typo in marc21_field_008.xml
"Tree-character alphabetic code", to "Three-character alphabetic code"
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Trees are nice, but Three is better here.
String change, works as described.
Owen Leonard [Fri, 21 Feb 2014 15:35:40 +0000 (10:35 -0500)]
Bug 11809: don't display 'Clear date' on OPAC patron details form if date of birth is required
On the OPAC's patron details form, if the date of birth field is
required we shouldn't offer the user a "clear date." This patch removes
the "clear date" link if the field is required.
To test, configure the BorrowerMandatoryField system preference to
require dateofbirth. Enable the OPACPatronDetails system preference and
log in to the OPAC. View the "personal details" form and confirm that
there is no "clear date" link next to the required date of birth field.
Remove dateofbirth from the BorrowerMandatoryField system preference and
re-test. The "clear date" link should appear.
Test in both prog and Bootstrap themes.
I tested with prog and bootstrap themes, adding/removing field 'dateofbirth'
in sys pref PatronSelfRegistrationBorrowerMandatoryField.
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Galen Charlton [Tue, 18 Feb 2014 20:59:56 +0000 (20:59 +0000)]
Bug 11772: (follow-up) make warning about no active currency a link to currency setup page
This patch standardizes the name of the currency and exchange rates
administration page (although I note that the breadcrumbs on that
page are inconsistent) and makes it a link.
Marc Véron [Sat, 15 Feb 2014 15:19:04 +0000 (16:19 +0100)]
Bug 11772: Show warning on About page:System information if no active currency is defined
This patch displays a warning on the About page when no active currency
is defined.
Test plan:
1)
Make sure that no currency is defined as active
(Home › Administration › Currencies & Exchange rates › Currencies)
2)
Go to Home › About Koha > System information
Result: No warning issued.
3)
Apply patch and reload About page
Result: Warning issued.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9e01b7c1d6c32dfd9ae0af4e708ca598303fbcf1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit e741435e351b7298ee79d51df32203efa135a582)
Owen Leonard [Fri, 21 Feb 2014 20:27:41 +0000 (15:27 -0500)]
Bug 11821: disable catalog edit menu items and provide explanations when actions cannot be done
Biblio edit menu items which are disabled should trigger a tooltip
on hover and an alert on click with explanations. This patch implements
this for the relevent menu items.
To test, apply the patch for Bug 11829 if necessary. Find a record which
has no items attached. Test the following views:
- Normal
- MARC
- Labeled MARC
- ISBD
- Items
Test these Edit menu items:
- Edit items in a batch
- Delete items in a batch
- Delete all items
Hovering over these menu items should trigger an explanatory tooltip.
Clicking the menu items should trigger a similar alert.
Next, locate a title with items attached. On the same pages above, test
the Edit -> Delete record menu item. Hovering should trigger an
explanatory tooltip. Clicking it should trigger a similar alert.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works nicely.
Colin Campbell [Wed, 14 Aug 2013 15:21:26 +0000 (16:21 +0100)]
Bug 10729: Add phrases configuration for ICU
Add a separate phrases-icu.xml for phrase indexes
The file is based on that distributed with zebra
with a couple of additions to reflect Koha usage
This patch adds a separate tokenizer variable
for phrase indexes so that default.idx is
correctly rewritten for sites using icu
indexing
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- Applied patch
- perl Makefile.PL --prev-install-log ../koha-dev/misc/koha-install-log
- make upgrade
- Restarted Zebra server
- Did a full reindex of bibliographic and authorities
- Checked various searches
- Links records to authorities
- Checked created links work correctly
I couldn't find a regression with this patch.
Passes all tests and QA script.
Jonathan Druart [Tue, 4 Feb 2014 11:15:42 +0000 (12:15 +0100)]
Bug 11675: check allocated total correctly when editing a fund that has a parent fund
The sth was created before the query.
The query was modified after the sth creation and an error was raised.
Test plan:
0/ Don't apply the patch
1/ Create a budget A (amount=1000)
2/ Create a fund A1 (amount=1000)
3/ Create a child fund A11 (amount=1000)
4/ Edit A11 and change the amount to 2000
You are able to do it, an error appears in the Koha log:
"check_parent_total.pl: DBD::mysql::st execute failed: called with 2 bind
variables when 1 are needed"
5/ Apply the patch, edit A11 and save. You get an error
6/ Edit A11 and change the amount to <=1000
7/ Verify that there is no regression on adding/removing/editing budgets
and funds.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described, no regressions found.
Jonathan Druart [Mon, 23 Dec 2013 08:58:30 +0000 (09:58 +0100)]
Bug 10837: make it possible to export serial claims as CSV even when no notice defined
On the serial claims page, it is possible to export (using a CSV
profile) or claim 1+ serials.
The checkboxes are not shown if the claiming notice is not defined.
So it is not possible to export claims.
Test plan:
- delete your notice "claimissues"
- go on the serial claims page
- verify that you are able to export them as CSV
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described and enables use of the export
funtionality even if you are not using the email notifications.
Exporting the serials will also set the claim date.
Passes QA script and tests.
Galen Charlton [Tue, 11 Mar 2014 14:57:26 +0000 (14:57 +0000)]
Bug 10777: (follow-up) improve CSS3 for Zebra-striping report email output
This patch improves the CSS used to attempt to Zebra-stripe the
output of emailed reports. This will work with some email clients,
but other email clients (e.g., Gmail) don't handle style elements in the
body or head element.
Bug 10777: email HTML reports with the proper Content-Type
The misc/cronjobs/runreport.pl allows for sending html reports
via email. The problem is that the Content-Type isn't set to
text/html, which means that the generated html email isn't
displayed properly.
This patch set the Content-Type, and also adds a tiny bit of
CSS to potentially alternate row colours (just to make long
reports a bit easier on the eye!)
TEST PLAN
----------
1. Run the script similar to this:
./misc/cronjobs/runreport.pl --format=html --to=YOUREMAIL --subject="Bad Formatting!" REPORTNUMBER
2. Look at the email - the html code should by visible and ugly.
3. apply the patch
4. Run the script again.
5. Look at the email - the data should look nicer now.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 25076dec54f06b6a7938f4a6cda0a80a1d3d51e4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit eedb9c0e6743aa8739fc01a68145be5a605a7f3e)
Owen Leonard [Fri, 21 Feb 2014 19:52:22 +0000 (14:52 -0500)]
Bug 11819 - Don't show catalog edit menu if user has no edit permissions
Currently if the logged in user lacks any cataloging permissions the
bibliographic detail page (catalogue/detail.pl) still shows the Edit
button, but with an empty dropdown menu. This patch corrects the toolbar
include so that the button will not appear at all.
To test, view the biblio detail page as a user with various combinations
of the following permissions:
The edit button should appear with the correct set of links when the
user has any combination of the above permissions. If user has none the
button should not appear.
Followed test plan, patch behaves as expected Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Template only change.
Fridolin Somers [Fri, 7 Feb 2014 09:13:39 +0000 (10:13 +0100)]
Bug 11707: fix editing additional attributes for patron whose category code includes a space
When editing additional attributes of a patron of a category with a
code with space (ie "CAT 3"), the Javascript is broken and Additional
attributes are not displayed.
This patch corrects by adding simple quotes around category code in JS
code.
Test plan :
- Create an patron additional attribute
- Create a new patron category with a space in code. ie "CAT 3"
- Create a new patron of this category : /cgi-bin/koha/members/memberentry.pl?op=add&categorycode=CAT 3
=> Without patch the JS is broken (Syntax error, unrecognized expression:
[data-category_code=CAT 3]) and additional attributes are not
displayed.
=> With patch the JS is not broken and additional attributes are
displayed and can be edited.
Signed-off-by: Marc Véron <veron@veron.ch>
In current Koha version it is not possible to create category codes
with blanks.
To test, I changed an existing category code directly in the database.
Then I followed the Test plan.
Without patch, attribute types were not displayed.
With patch, they were displayed as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I recommend not using codes with spaces and fix existing ones.
Koha doesn't allow you to add category codes with spaces, so the only way
to do it is via SQL.
This patch fixes a problem and passes all tests.
Owen Leonard [Fri, 21 Feb 2014 14:22:50 +0000 (09:22 -0500)]
Bug 10751: standardize validation of title in staff purchase suggestions form
The form for adding a new purchase suggestion in the staff client
indicates that the title field is required but does nothing to enforce
this rule. This can be handled client-side with HTML5 validation
attributes and Koha's built-in validation plugin. This patch implements
this.
To test, apply the patch and go to Acquisitions ->
Suggestions -> New purchase suggestion. Try submitting the form without
entering a title. Doing so should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing suggestion should also work correctly.
The patch displays a message 'Required' near the title field.
After submitting a empty title it changes to 'This field is required' Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The title field is required since commit d565fb02e9fca2ac9c506e4e7d44fd8b0d66f06a
This one makes it more consistent with formatting. It makes sense.
Marcel de Rooy [Thu, 20 Feb 2014 18:39:10 +0000 (19:39 +0100)]
Bug 11803: use $dbh consistently in _koha_modify_item
This is just some code cleanup, no behavior change expected.
Also replacing errstr with err in testing the results. (See DBI.)
Test plan:
Modify an item and save it.
Followed test plan. No problems found. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a07b32f4f9090ba0c50c3e510f0be56b8805faeb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit c9057046766fc695385449766d29e011d08de574)
Jonathan Druart [Tue, 18 Feb 2014 14:07:38 +0000 (15:07 +0100)]
Bug 11471: Display the currency for baskets in a basketgroup
On editing a basketgroup, the currency for baskets in a basketgroup is
always '0'.
With this patch, the currency is correctly displayed.
TEST PLAN
=========
1) Log into staff client
2) Acquisitions
3) Click 'Search' in the 'Manage orders' box
4) Click '+ New basket' because a vendor name
5) Type 'Test Basket' into basket name
6) Click 'Save'
7) Click 'Add to basket'
8) Click 'From an external source'
9) Type 'Green Eggs and Ham' into the Title text box
10) Click 'Search'
11) Click 'Order' on any one of the results
12) Click 'Add Item' in the 'Item' box
13) Select a Fund from the dropdown in the
'Accounting details' box
14) Click 'Save'
15) Click 'Close the basket'
16) Click 'Yes, close (Y)' without checking attach to a
basket group
17) Click the 'Basket groups' tab
18) Click '+ New basket group'
19) Notice the listing in the 'Ungrouped baskets'.
20) Drag and drop the entry into the 'Baskets in this group'
text area
21) Click 'Save'
22) Click 'Edit'
23) Notice it displays incorrectly. (e.g. Total: 0 0)
24) Apply the patch (git bz apply 11471)
25) Refresh the page
26) Notice it displays the currency correctly. (e.g. Total: 0 USD)
NOTE: If there is a space issue, see Bug 9654.
This can be applied separately from that bug.
27) Run the Koha QA Tool: (~/qa-test-tools/koha-qa.pl -v 2 -c 1)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7a2dec05eddc979b5a957a651e393838c13560c4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Conflicts:
acqui/basketgroup.pl
Marcel de Rooy [Thu, 20 Feb 2014 11:54:32 +0000 (12:54 +0100)]
Bug 11799: Housekeeping: Remove _biblionumber_sth from VirtualShelves.pm
This routine is no longer used.
Test plan:
Do a grep on the name.
(Bonus points:) Verify if you can perform some actions on lists.
No more occurences of _biblionumber_sth found Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5e0d450875f24d1f9ef6620b033b5179633589da) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 84a9b3192e82484dba6cbe041028b0c8818eb41b)
Bug 10580: adjust Makefile.PL to reflect that Zebra no longer optional in Koha setup
Running Makefile.PL asks the user whether to install the Zebra
configuration files and different texts relate to the user having
chosen to use Zebra.
This patch removes references to choosing to use Zebra and removes
the related variables from the code.
To test:
- Apply the patch
- Go through the different install modes
- Verify that nothing nothing is broken
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0b989fe0b2097d747da1fd6d04aa8aecc5652d06) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 996060aa92aa091a991ebe25cd2cd255b0d9d694)
Nicole C. Engard [Fri, 24 Jan 2014 15:47:53 +0000 (09:47 -0600)]
Bug 11272 - add second submit button to inventory form
The inventory tool allows for 2 ways of processing files. The first
is to upload a file. The second is to generate the shelf list.
Most libraries think they have to fill in all fields because the
submit button is at the bottom of the second option. They do not.
This patch adds a second submit button under the first method to
make this clearer.
To test:
* Generate a file of barcodes for inventorying
* Before applying the patch use the file upload method to mark as seen
* Apply the patch
* Use the file upload method to mark as seen using the new submit
* Repeat the above for the shelf list method
* Confirm that inventory still works as expected with 2 buttons
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 40ba1763afc40cd47b23892a3248fd877dc8edce) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit fdeb2a0cad0b686617d8376842408bb437fa26c4)
Kyle M Hall [Wed, 19 Feb 2014 20:26:24 +0000 (15:26 -0500)]
Bug 11796: fix display of search result facets if facet happens to have exactly six entries
If a search gives results with 6 facets, one of those facets won't be
displayed. This is due to a bug in the code that only considers great
than 6 facets in one area, and less than 6 in another.
Test Plan:
1) Perform a search that should give results for 6 different libraries
2) Note you only see 5 libraries in the facets with no option to expand
3) Apply this patch
4) Repeat step 1
5) Note you now have the option to expand the facets list
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch should provide a regression test but I really don't know how
to write it.
Owen Leonard [Tue, 18 Feb 2014 17:13:39 +0000 (12:13 -0500)]
Bug 11785 - Use validation plugin when uploading local cover images
When uploading local cover images the form should not be submitted if
no file has been selected. The existing form validation script doesn't
work. This patch adds HTML5 validation attributes and use of Koha's
built-in form validation plugin.
To test, apply the patch and go to Tools -> Upload local cover image.
Try to submit the form without selecting a file to upload. You should be
prevented from doing so. Choose a file and confirm that the upload
completes correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7faff33c8b9bd670cf7813f4cefb7aee38709ebb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit fc50362c231ceb9a410dcbcbce94b8124db1aa13)
Owen Leonard [Wed, 19 Feb 2014 20:06:36 +0000 (15:06 -0500)]
Bug 10714 [Follow-up] Redirect to list contents view upon cancel after initiating edit from list contents view (staff)
This follow-up corrects the "cancel" action on list edit actions based
on whether the edit was initiated from the list of lists or the list
contents view.
To test, view the list of lists and click the edit link next to one of
them. Click the cancel link. You should return to the list of lists you
were just viewing.
View the contents of a list. Choose "Edit list" from the edit menu.
Click the cancel link on the edit screen. You should return to the list
contents view from which you initiated the edit action.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 6a323ce4ce914e757d5c1c999237ad2c0efc15e9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 7d40a4c9081d50b15652f80a0d65d8a60f7a57b5)
Owen Leonard [Mon, 12 Aug 2013 19:30:16 +0000 (15:30 -0400)]
Bug 10714: Redirect to list contents view upon save after initiating edit from list contents view (staff)
In the staff client, if you initiate a list edit from the list contents
view you should be redirected to that same view after saving your
changes. The OPAC already works this way.
To test, view the contents of an existing list. Click the "Edit list"
item under the "Edit" menu. Click save on the list edit form and you
should be redirected back to the contents view of that list.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit daa98e73f8baf178f2b0f32b4988d2414519ea4b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 3ef4918dc7afcc58ea180d40768344a558799931)
Kyle M Hall [Thu, 30 Jan 2014 17:39:19 +0000 (12:39 -0500)]
Bug 11644: fix occasional failure to update fund amount due to floating-point math
When attempting to update a fund, if the amount unalloccated for the
fund is equal to the total, you can be prevented from saving. This is
due to imprecise floating point number comparison in
check_parent_total.pl
Test Plan:
1) Create a fund where the amount unallocated is equal to the amount
unallocated for the budget period
2) Edit the fund, attempt to change the name of the fund
3) Note you recieve an error and cannot save
4) Apply this patch
5) Repeat step 2
6) Note you can now update the fund
Signed-off-by: Sean McGarvey <smcgarvey@pascocountyfl.net> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ba689152e431217c8dd02d6ce0b8d14ae8d9f5da) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 984758cd3c76276366be05149324df6a17916cad)
Galen Charlton [Wed, 19 Feb 2014 16:40:06 +0000 (16:40 +0000)]
Bug 11779: (follow-up) improve GetLoggedInBranchcode() and add test cases
This patch adjusts the new GetLoggedInBranchcode() template function so
that it returns the empty string rather than undef if there is no
active user environment. That way, there won't be lots of undefined
value warnings if/when this function gets used in the OPAC.
This patch also adds test cases.
To test:
[1] Verify that there are no regressions in the main test
plan for this bug.
[2] Verify that prove -v t/db_dependent/Koha_template_plugin_Branches.t
passes.
Kyle M Hall [Tue, 18 Feb 2014 12:43:44 +0000 (07:43 -0500)]
Bug 11779: fix unexpected change in logged-in library when changing overdue notice triggers
Steps to reproduce:
1) Log into staff intranet
2) Set logged in branch
3) Browse to tools/overdue notice triggers
4) Select a branch from the pulldown that is not your logged in branch
5) use the "Check out" bar at the top of the page to search for a patron
to check out to
6) Once you have landed here, click the "check out" tab link again, or
the Edit button ( any action really )
7) Note your logged in branch has now changed to the once selected
when editing the notice/status triggers
This is due to the way the patron search passes the branchcode to be
used via the form. This form assumes the branchcode variable is
always the currently logged in branch, which may not and is not
always the case.
Test Plan:
1) Apply this patch
2) Repeat the steps to reproduce above
3) Note your logged in branch does not change
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Funny bug :) This patch fixes the described issue and should not
introduce regression.
Owen Leonard [Fri, 14 Feb 2014 13:48:46 +0000 (08:48 -0500)]
Bug 11756: improve default sorting on hold ratios report
The DataTables plugin doesn't by default take multiple columns into
account when sorting. The hold ratios report presents a situation where
it makes sense to sort by default based on two columns: hold count and
title, since there are likely to be many titles with the same hold
count.
This patch adds sorting by default on holds (descending) and title
(ascending). It also modifies the configuration of the title sort to
exclude articles when sorting.
To test, view the hold ratios report. If necessary use the filter form
to reduce the minimum hold ratio and generate more results. Confirm that
the correct columns can be sorted.
Note that by default one can manually trigger sorting on two columns by
shift-clicking the second column header.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7514dc897cc49683915112229667ec1f654873ae) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit ca668451a71b178dbb37539c329af1de9726513e)
Stéphane Delaune [Mon, 10 Feb 2014 09:52:59 +0000 (10:52 +0100)]
Bug 11730: ensure that C4::Charset loads C4::Context
C4::Charset::SetMarcUnicodeFlag() fetches system preference
values, so since it invokes routines in C4::Context, it should
load the module.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b9d2a832db6d2a75d6466a349b769e8285d1f0c8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit acec28bc4c9319da4490eb940ef54d0875c97c48)
Marc Véron [Sat, 15 Feb 2014 16:07:55 +0000 (17:07 +0100)]
Bug 11773: fix crash in sco-main.pl if no active currency is set
If no currency is defined as active and a patron with debts tries to
check out in welf checkout moduel, sco-main.pl crashes with:
Software error:
Can't use an undefined value as a HASH reference at /usr/share/kohaclone/opac/sco/sco-main.pl line 190.
This patch tests for active currency and simply does not display a
currency symbol if appropriate.
Test plan:
1) Make sure you have a patron with debts and no currency defined as
active. (Home › Administration › Currencies & Exchange rates
› Currencies )
2) Go to Self checkout module and try to checkout an item to this patron
Result: Crash with error message "Can't use an undefined value as a
HASH..."
3) Apply patch
4) Reload and try to checkout again
Expected result: Message "You owe the library..." without currency
symbol
5) Define a currency as active and try to checkout again
Expected result: Message "You owe..." with currency symbol
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 1db56c834b297eb7fd968691f66ef3517771cba5) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 0e0b39deafed3376bc65af9bf9ee7ec678c60d35)
Galen Charlton [Fri, 14 Feb 2014 00:24:56 +0000 (00:24 +0000)]
Bug 11757: remove dependency on POE
The last use of the POE family of Perl modules went away with
the removal of zebraqueue_daemon.pl per bug 9001. Consequently,
this patch removes POE as a dependency.
To test:
[1] Verify that "git grep POE" and "git grep libpoe" report
nothing.
[2] Verify that koha_perl_deps.pl -a does not report POE
as a dependency.
[3] (extra credit) verify that Debian packages can be built
that do not list libpoe-perl as a dependency.
This patch also updates some distro-specific installation
instructions and scripts, but makes no representations about
whether those instructions currently work.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b67dac81cceaab356486001292cff40977682fff) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit ab85f0c5d03df5cbdeecac94cc9ae5e4b327a083)
Bug 11704: Make */svc/report print the correct headers
To test:
1 - Go through the first comments instructions to reproduce
and verify the bug is present (OPAC and STAFF)
2 - Apply the patch
3 - Repeat step 1 and notice
* characters are not broken anymore
* the header is correct
4 - Sign off
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit aace5d436dbab1f13e2e1c06d0b4ed5f1ec13ced) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit a47eb5ea549b63d8fb410f966124c7ef0fdc3227)
Jonathan Druart [Tue, 16 Jul 2013 09:53:47 +0000 (11:53 +0200)]
Bug 10611: Use mysql_auto_reconnect instead of ping
DBD::Mysql provides a mysql_auto_reconnect flag. Using it avoids
the time required to do a $dbh->ping().
Benchmarks:
use Modern::Perl;
use C4::Context;
for ( 1 .. 1000 ) {
$dbh = C4::Context->dbh;
}
* without this patch on a local DB:
perl t.pl 0,49s user 0,02s system 98% cpu 0,525 total
* without this patch on a remote DB:
perl t.pl 0,52s user 0,05s system 1% cpu 37,358 total
* with this patch on a local DB:
perl t.pl 0,46s user 0,04s system 99% cpu 0,509 total
* with this patch on a remote DB:
perl t.pl 0,49s user 0,02s system 56% cpu 0,892 total
Testing the auto reconnect:
use Modern::Perl;
use C4::Context;
my $ping = $dbh->ping;
say $ping;
$dbh->disconnect;
$ping = $dbh->ping;
say $ping;
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Real improvement. No koha-qa errors
prove t/db_dependent/Circulation_issuingrules.t produces no error
prove t/db_dependent/Context.t produces no error
Test
1) dumped Koha DB, load it on a non-local server
2) run sample script whit and without patch, local and remote
use Modern::Perl;
use C4::Context;
for ( 1 .. 100000 ) {
my $dbh = C4::Context->dbh;
}
Main difference I note is with remote server
a) without patch
real 0m16.357s
user 0m2.592s
sys 0m2.132s
b) with patch
real 0m0.259s
user 0m0.240s
sys 0m0.012s
I think this could be good for DBs placed on
remote servers
Bug 10611: add a "new" parameter to C4::Context->dbh
When dbh->disconnect is called and the mysql_auto_reconnect flag is set,
the dbh is not recreated: the old one is used.
Adding a new flag, we can now force the C4::Context->dbh method to
return a new dbh.
Test plan:
1/ Open a bib record with more than 1 item ,
2/ Select all items
3/ Chose Modify selected items
4/ put you "ق ك و" in notes
5/ Verify the items have been updated correctly
6/ put you "éàç" in notes
7/ Verify the items have been updated correctly
8/ put you "ق ك و éàç" in notes
9/ Verify the items have been updated correctly
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed bug on master and that the patch fixes it.
Passes all tests and the QA script.
Jonathan Druart [Fri, 24 Jan 2014 15:07:08 +0000 (16:07 +0100)]
Bug 11608: Delete unused commented lines in template
On the way, these lines are commented and can be deleted safely.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removes an HTML comment with unused code.
Nicole C. Engard [Fri, 24 Jan 2014 14:34:27 +0000 (08:34 -0600)]
Bug 11608: Remove the word 'library' from funds list
The list of funds on the main acq page shows the library's name
followed by the word 'library'. I don't think this word is necessary
as most libraries have the word 'library' in their names. Even
if they don't they probably just want their library name to show
without extra words.
To test:
* Visit the acquisitions module before applying
* See the library's name + 'library' above the funds list
* Apply patch
* Look again at funds list and 'library' should be gone
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: remove a space
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Chris Cormack [Fri, 22 Nov 2013 22:04:00 +0000 (11:04 +1300)]
Bug 11290: fix display of patron home page for certain translations
To test
1) In a fresh Koha, generate translation into XX
2) Select XX for the staff interface (i.e. enable it, and choose it)
3) Go to the Patrons page
4) Everything looks fine
5) In the admin page, create a patron category with any non-ASCII
character.
6) Go back to the Patrons page, everything is broken
7) Apply patch
8) regenerate translation
9) Go back to the Patrons page, everything looks fine
10) Switch to english it still looks fine
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tried with ru-RU and fixes the problem.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Problem is also visible on untranslated templates changing
one of the sample category descriptions to include diacritics.
[RM note: I wasn't able to reproduce this on an unstranslated
template -- I tried using Arabic, Cyrllic, and Spanish characters]
Galen Charlton [Fri, 31 Jan 2014 16:21:05 +0000 (16:21 +0000)]
Bug 11513: (follow-up) format enrollment end date consistently
The previous patch added use of the KohaDates TT plugin, so this
patch makes sure that it gets used to format the display of all
occurrences of the enrollment end date.
To test:
[1] Create a patron category with a fixed end date.
[2] Bring up the list of all categories and verify that the date
is displayed based on the dateformat value.
[3] Delete the category, and verify that the confirmation dialog
formats the date correctly.
Mark Tompsett [Fri, 10 Jan 2014 05:06:21 +0000 (00:06 -0500)]
Bug 11513 - Warnings in Patron categories
Just going to the patron categories page triggered errors.
Running through all the plain options also triggered other
warnings. This fix silences them.
Discovered tabs I had not corrected by running qa test tool.
Some errors which I could not trigger were also fixed, such
as line 248 shown by Merllissia Manueli.
TEST PLAN
---------
1) Log in to staff client
2) Click 'Administration'
3) Click 'Patron categories'
4) Click '+ New category'
5) Enter a dummy category and click 'Save'
6) Click 'Edit' for the dummy category.
7) Change a value and click 'Save'
8) Click 'Delete' for the dummy category.
9) Confirm to delete.
10) Review error log, several new warnings
11) Apply patch
12) Run the koha qa test tool.
13) Click 'Home'
14) Click 'Administration'
15) Click 'Patron categories'
16) Click '+ New category'
17) Enter a dummy category and click 'Save'
18) Click 'Edit' for the dummy category.
19) Change a value and click 'Save'
20) Click 'Delete' for the dummy category.
21) Confirm to delete.
22) Review error log, no new warnings
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan, saw no errors in the log after applying the patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested various dates and enrollment periods with different settings of
dateformat pref. Works as advertised. No warnings.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Liz Rea [Fri, 25 Oct 2013 03:40:03 +0000 (16:40 +1300)]
Bug 11138 - auto_unsuspend_holds cronjob not in default cron jobs.
to test:
Install the packages with this patch, observe the /etc/cron.daily/koha-common file - auto_unsuspend_holds should now be in the default list.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Liz Rea [Thu, 14 Nov 2013 01:52:28 +0000 (14:52 +1300)]
Bug 11138 - Add auto_unsuspend_reserves to crontab.example
To test:
Set up and run the cronjobs from crontab.example with a hold set to unsuspend today.
The hold should be unsuspended.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 10691: 5xx not properly linked by authid in authority search result list
This patch changes the URL and data used to show the 'see also' links
on the OPAC's authority search results page.
Bonus points: makes some strings translatable.
To test:
- On your dev setup (master) create some authority records (i created personal name authorities).
- Pick one of them and link 400$a to another one, do the same with 500$a
- Add some other 400$a and 500$a without linking (i.e. plain text)
- Make sure zebra is running and changes got indexed.
- In the OPAC search for the authority that is linked to the others.
- Check the 'see also:' link points to an authority search
- Apply the patch
- Reload/re-do the search
- Check the 'see also:' link points to the authority id in the case of linked authorities,
and to an authority search in the case of plain text names.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 10691: 5xx not properly linked by authid in authority search result list [Staff]
This patch changes the URL and data used to show the 'see also' links
on the Staff's authority search results page.
Bonus points: makes some strings translatable.
To test:
- On your dev setup (master) create some authority records (i created personal name authorities).
- Pick one of them and link 400$a to another one, do the same with 500$a
- Add some other 400$a and 500$a entries with plain text (i.e. no linking)
- Make sure zebra is running and changes got indexed.
- In the staff interface search for the authority that is linked to the others.
- Check the 'see also:' link points to an authority search
- Apply the patch
- Reload/re-do the search
- Check the 'see also:' link points to the authority id for linked authorities,
and to an authority search result in the case of plain text entries.
- Check that the authority search from the cataloguing interface still works as usual.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Owen Leonard [Fri, 10 Jan 2014 16:56:15 +0000 (11:56 -0500)]
Bug 11476 - Opac self registration title pull down offers 2 empty options
If you have patron titles enabled, the OPAC patron details form lists 2
empty spaces instead of 1. An empty option is passed by the script, so
the template does not need to include one.
To test you must have at least one patron title set in BorrowersTitles
system preference and OPACPatronDetails must be set to "allow."
1. Apply the patch
2. Log in to the OPAC
3. Click the "personal details" tab.
4. Click the "salutation" dropdown. There should be only one blank line
preceding the existing titles.
Test in both prog and bootstrap.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described for existing and creating new accounts.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Francesca Moore [Tue, 14 Jan 2014 22:43:00 +0000 (11:43 +1300)]
Bug 11522 self-registration formating
1. in prog theme, enable opac self-registration and inspect clear date with firebug
note that there are empty paragraph tags
2. add date of birth as a requirment in self-registration
3. apply patch
4. refresh page and notice that empty paragraph tags have been deleted,
so that required lines up with clear date
5. repeat the above steps for bootstrap theme
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log