Alex Arnaud [Thu, 11 Jun 2015 08:55:35 +0000 (10:55 +0200)]
Bug 13663: Fix permissions in upload-file.pl and upload-file-progress.pl
Test plan:
Verify that the circulate_remaining_permissions perm is enough to upload
.koc file.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14548: Typo in help file for 3.20 (batch_record_modification.tt)
Typo found in batch_record_modification.tt file for Koha help in 3.20
Test plan:
1) Go to url 'koha-tmpl/intranet-tmpl/prog/en/modules/help/tools/batch_record_modification.tt:20' and check the typo "critera" or go to Tools › Batch record modification, open up the help
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed.
Sponsored-by: Universidad de El Salvador Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Typo found in basket.tt file for Koha help in 3.20
Test plan:
1) Go to url 'koha-tmpl/intranet-tmpl/prog/en/modules/help/acqui/basket.tt:24' and check the typo "susbscription" or go to Acqusitions > create or view an existing basket, open up the help
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed.
Sponsored-by: Universidad de El Salvador Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Chris Cormack [Sun, 26 Jul 2015 07:07:19 +0000 (19:07 +1200)]
Bug 7143: New developers
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Indranil Das Gupta needs to be included. Emmanuele Somma was
missed a while back, so adding ad shifting numbers for people after her.
Some tab fixes too, I don't have the time to fix them all.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Thu, 8 May 2014 15:48:42 +0000 (15:48 +0000)]
Bug 12216: One should be able to override zebra config
One should be able to override zebra configuration on a per instance
basis. This patch adds /etc/koha/sites/instance to the 'profilePath'
in the zebra config files such that that location is sources first
for any override config files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Great catch Martin. I thought this was already pushed by the way.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
This will be useful. Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Tue, 30 Sep 2014 19:07:50 +0000 (15:07 -0400)]
Bug 13851: Replace waiting holds logic in circulation.pl with Koha Objects
This is the original patch for bug 12892 and replaces the older style of
fetching the holds data with Koha Objects. It will be used as a
foundation for future features.
Test Plan:
1) Apply this patch
2) Create a hold, set to waiting
3) Browse to circulation.pl for that patron
4) Note you see the list of waiting holds
5) Switch your logged in branch to a different branch
6) Note the "Waiting at" line is no longer emphasized.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us> Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mark Tompsett [Fri, 15 May 2015 04:49:18 +0000 (00:49 -0400)]
Bug 13948: Prevent explosion when Template::Plugin::Stash not installed
TEST PLAN
---------
1) Install first two patches
2) do not install, or uninstall Template::Plugin::Stash
3) Upgrade to make sure system preference is added.
4) Set the system preference to turn it on for Staff and OPAC
5) Refresh staff -- kaboom
6) Load OPAC -- kaboom
7) Apply this patch
8) Reload staff and OPAC
-- nice HTML comment about what is wrong.
9) run koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Neat, runs well. Tested with/without sysprefs and Template::Plugin::Stash
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Kyle M Hall [Thu, 2 Apr 2015 15:14:45 +0000 (11:14 -0400)]
Bug 13948: Add ability to dump template toolkit variables to html comment
It would be incredibly helpful if we could easily enable Koha to dump
all Template Toolkit variables to a comment for debugging purposes.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable the new system preferences DumpTemplateVarsIntranet and
DumpTemplateVarsOpac
4) Load a page in the staff intranet, view the html source
5) Note the template toolkit variables are embedded in an html comment
6) Load a page in the opac, view the html source
7) Note the template toolkit variable are embedded in an html comment
NOTE: I had to cpan2deb Template::Plugin::Stash to test.
This is not optimal. Additionally:
http://www.template-toolkit.org/docs/modules/Template/Plugin/index.html
does not contain Stash. I suspect this was how it was
introduced initially by TT.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Marcel de Rooy [Wed, 20 May 2015 11:42:37 +0000 (13:42 +0200)]
Bug 13049: [QA Follow-up] Remove unneeded module
The call to cronlogaction is done in cleanup_database. So there is no use
in keeping the module here.
Test plan:
Run or compile (perl -c) script delete_expired_opac_registrations.pl.
Run or compile (perl -c) script delete_unverified_opac_registrations.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Marcel de Rooy [Thu, 9 Oct 2014 07:52:44 +0000 (09:52 +0200)]
Bug 13049: Merge selfreg cron jobs into cleanup_database
This patch moves the core code of two selfreg cron jobs into the Members
module. The new routines are called from cleanup_database with two new
parameters. The old cron jobs are now wrappers to cleanup_database.
As a bonus, we can add a unit test now.
In time, we can obsolete the selfreg cron jobs. For now, the code is in one
place and behavior does not change.
A next step (as described on the Bugzilla report) would be: remove the Delay
pref for self regs.
Test plan:
Run the unit test t/db_dependent/Members.t.
Test the two new parameters of cleanup_database.pl.
Verify if delete_expired_opac_registrations.pl still works.
Same for delete_unverified_opac_registrations.pl.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
. Fixed minor merge confict on UT & cleanup_database.pl
. UT ok
. The two deprecated scripts still work as before, with a warning
message.
. cleanup_database.pl do the deletion job, calling new C4::Members
function rather that doing it directly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14240: Add '(All libraries)' to notice deletion form
Trivial patch that shows (All libraries) instead of an empty cell
for notices that are applicable across all libraries.
Test plan
=========
1) Log in to staff client
2) Tools->Notices & slips
3) Add a dummy notice for all libraries
-- test code, test description, email - test subject, test content
Click Submit
4) Click Delete
-- note that the Library column value is blank.
5) Click the no option
6) Apply this patch
7) Click Delete
-- note that the Library column value is (All Libraries).
8) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 10961: (followup) Make query fields explicit and add regression tests
add correct frameworkcode to _koha_marc_update_bib_ids parameters
add test, prove with : prove t/db_dependent/Biblio.t
TEST PLAN
---------
1) git checkout -b bug_10961 origin/master
2) git bz apply 10961
3) git checkout origin/master -- C4/Biblio.pm
4) prove t/db_dependent/Biblio.t
-- was expecting failure, got failure.
5) git reset --hard origin/master
6) git bz apply 10961
7) prove t/db_dependent/Biblio.t
-- success as expected.
8) Read over code.
-- Noted it also grabs the framework code for the biblio, rather than uses default.
And it also corrects an indentation issue.
Test case looks like it attempts to cover the biblionumber!=biblioitemnumber case
by adding 1.
9) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Fri, 27 Sep 2013 16:53:39 +0000 (12:53 -0400)]
Bug 10961: Error in GetMarcBiblio can cause severe data loss
A bug in GetMarcBiblio can cause severe data loss if your database has
records where the biblionumber and biblioitemnumber do not match and the
script misc/batchRebuildBiblioTables.pl is run.
The Biblio::GetMarcBiblio makes a kall to
C4::Biblio::_koha_marc_update_bib_ids which passes the biblionumber as
both the biblionumber *and the biblioitemnumber*.
Thus, if your biblio and biblioitem numbers are not always equal, you
will end up with a record where the biblioitemnumber is incorrect in the
record!
This is usually not a severe issue, but since batchRebuildBiblioTables
uses that record to update the database tables, it ends up updating the
wrong biblioitem row!
NOTE: What a horrible, horrible typo that was. Tested this with the
second patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Fri, 3 Jul 2015 22:04:04 +0000 (18:04 -0400)]
Bug 14487: Noise best detected under Debian 8
The first error is caused by the fact that
$messages->{'IsPermanent'} is undefined.
The second error is caused by querying the CGI
parameter 'barcode' inside a function call. This is not required.
There is a variable $barcode set with the parameter. Changed to
use the variable.
TEST PLAN
----------
1) Test first patch.
2) Clear the log
3) Put in a barcode which is not checked out.
4) Check the log.
-- should be two errors. One about a hash,
the other will only be detectable under Debian 8.
5) Apply this second patch
6) Clear the log
7) Put in a barcode which is not checked out.
8) Check the log.
-- should be empty.
9) run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
1/ check out an item and then check it back in.
1/ check the logs after the check-in to see the warns from
returns.pl line 623 of :
(a) Use of uninitialized value $holdingBranch
(b) Use of uninitialized value $collectionBranch
2/ apply patch
3/ check out and check-in again. no warns are recorded this time.
NOTE: Under Debian Jessie, there are other messages.
Additionally, this only corrects the line 623 ones.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Marc Véron [Sat, 2 May 2015 05:20:22 +0000 (07:20 +0200)]
Bug 14107: Patron cards: Make barcode width and height scaling editable
The size of the barcode in patron card creator was hardcoded to 1% of the card height and 80% of the card width.
This patch exposes both values in the layout editor. If no values are given, the previousely hard coded values (0.01 / 0.8) are used in order to work with existing card definitions.
To test:
- Go to Home > Tools > Patron card creator
- Export a patron card (PDF) from en existing definition
- Apply patch
- Export patron card again, compare results (should be the same)
- Go to Home > Tools > Patron card creator > Manage card layouts
- Edit the layout you use for testing and set barcode scaling values e.g. to 0.03 for height and 0.4 for widht
- Export patron card again, verify that barcode size changed
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14268: Followup - instruction for preftype selection
removes the now redundant instruction "Note: you should have no
reasons to modify the following default values" and replaces it
with "Note: change the variable type to one of the dropdown values
as needed"
Signed-off-by: Tadeasm <tadeas.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mark Tompsett [Mon, 25 May 2015 19:38:36 +0000 (15:38 -0400)]
Bug 14268: Use dropdown for variable types
The information needed to build the dropdown is already passed.
This patch uses it to build the variable type dropdown correctly.
TEST PLAN
---------
1) Apply 14135
2) In the staff client:
Home -> Global system preferences -> Local use
3) Click 'Edit' on any system preference.
4) Note all the types listed.
5) Click 'Cancel'
6) Apply this patch
7) Click '+New Preference'
8) Enter data to have a decent 'Free' type preference.
9) Click 'Save'
10) For each type noted in step 4 (do 'Free' again last)
a) Click 'Edit' for the added system preference
-- it should be the last saved variable type.
b) Change the variable type to the next type.
c) Click 'Save'
d) Repeat steps (a) through (c) until all the types have
been done.
-- NOTE: Yes, there are other strange things here, but
those are beyond the scope of this bug.
11) Run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Tadeasm <tadeas.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Mon, 8 Jun 2015 02:28:50 +0000 (04:28 +0200)]
Bug 12906: Show shipment date in invoice search result list
Patch adds the shipment as a new separate column to the
search results of the invoices search.
To test:
- Search for invoices in the acquisition module
- Verify the results table shows the shipment date
- Verify that sorting works correctly
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mark Tompsett [Thu, 30 Apr 2015 00:52:43 +0000 (20:52 -0400)]
Bug 5685: Add missing about information
In comment #20, Katrin requested the about page be updated
to reflect the addition of a jquery plugin.
TEST PLAN
---------
1) Apply all patches
2) Log in to Staff Client
3) Home -> About Koha -> Licenses
-- jQuery Validation Plugin is now listed nicely.
4) Run koha qa test tools
License appears as expected, qa OK Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Thu, 23 Oct 2014 13:50:38 +0000 (09:50 -0400)]
Bug 5685: [OPAC follow-up] Validation of email address field
This patch makes a few changes to the way errors are handled in the
OPAC:
- The validation plugin has been moved from the global include file to
the template itself. Since we aren't doing form validation on any
other page yet it doesn't make sense to include it globally at this
time.
- The error message which appears if you have JavaScript disabled and
have submitted invalid emails was styled in a non-standard way.
- I have added in-page links to the error message which appears if you
have JavaScript disabled so that you can click to jump to the field
which contains the error.
- I have modified the error message language slightly to make it (I
hope) read better.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Juhani Seppälä [Fri, 15 Aug 2014 09:11:17 +0000 (12:11 +0300)]
Bug 5685: Validation of email address field
This patch adds server-side & client-side validation for email
form fields in the members/memberentry -view and in the
opac/memberentry-view (bootstrap).
I recently added simple validation for phone number and email address fields
for our in-house koha and saw this old bug: I'm open to any ideas on how
to do this better. Validation for phone numbers would be easy to add on
top of this but I left it out since this bug is only about the email
fields.
To test:
1) Select a member and go to any of the edit forms with email fields
(Primary info, "Library use", "Alternate address", "Alternative
contact").
2) Disable javascript in the browser in order to test server-side
validation and try to input invalid emails in each of the email form
fields.
3) Confirm that an invalid address is catched from any of the email
fields, an alert shown for each invalid address and that the member's
information was not updated with invalid data.
4) Enable javascript in the browser.
5) Confirm that the jquery validation plugin caches invalid addresses
from any of the email fields and that you cannot send the form before
correcting the problem.
6) Perform the same tests for the opac-memberentry-view.
Note: as the jQuery validation plugin doesn't exist in the bootstrap
folder, I just copied it over from the staff-client folder -how to deal
with this?
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I have undone the changes to opac.css so that they can be submitted as a
separate patch. I have some other follow-ups to make as well.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
mxbeaulieu [Mon, 15 Jun 2015 15:05:51 +0000 (11:05 -0400)]
Bug 14387: Merge reference selection has no effect when merging authorities.
This patch swaps the authority records according to the refenrece record selection.
To TEST:
Merge two authority records, select the second as merge reference.
The reference authority is always the first.
Apply the patch.
Repeat previous steps, the authority is now merged using the selected reference record.
modified: authorities/merge.pl
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 11693: Default emailing preferences not loaded for self registering patron
The call to AddMember_Opac does not take care of the messaging prefs
when enhanced messaging is enabled.
This patch adds the call to handle_form_action to do that.
Test plan:
Enable self registering patrons and enhanced messaging.
Check the (default) message prefs for the relevant patron category. At least
enable email for one notice.
Self-register a user with and without verification email enabled.
Check in both cases that the message prefs of the user conform to
those in the patron category. (So at least one enabled.)
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Mon, 13 Apr 2015 08:12:03 +0000 (10:12 +0200)]
Bug 8684: Add regression tests for SearchItemsByField
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Tue, 7 Apr 2015 12:14:18 +0000 (14:14 +0200)]
Bug 8684: Fix duplicate check on creating items in the acquisition module
The script acqui/check_uniqueness.pl has been introduced by bug 7178.
But bug 11425 added a call to a new subroutine SearchItemsByField in
order to refactore some code. This subroutine calls SearchItems with an
arrayref, which is not what SearchItems is expecting.
This broke the duplicate check done on creating items in the acquisition
module.
To reproduce the issue:
1/ Fill the pref UniqueItemFields with "barcode" and AcqCreateItem with
"placing an order"
2/ Create a new basket
3/ Create a new order
4/ Close the basket
5/ Receive items and set barcode with one already in your DB
6/ Save
7/ Nothing happen on the interface, but an error should have been added
in your Koha log file:
Can't use an undefined value as an ARRAY reference at
/home/koha/src/acqui/check_uniqueness.pl line 48.
Test plan:
1/ Repeat steps 1-6
2/ You should see a warning on the interface
Note that this should also happen with AcqCreateItem set to "creating an
order".
Works well, no errors.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jacek Ablewicz [Wed, 24 Jun 2015 17:43:05 +0000 (19:43 +0200)]
Bug 14456: EmbedSeeFromHeadings record filter shouldn't process MARC holding fields
If the system preference IncludeSeeFromInSearches is enabled, records
exported for zebra indexing are being additionally processed by
EmbedSeeFromHeadings record filter (right now used only in rebuild_zebra.pl
script). This filter embeds 'see from' fields (extracted from authority
records linked with the given biblio via $9 subfields) into target MARC
record, which is then subsequently indexed in zebra.
Currently all fields containing $9 are getting the same exact treatment
by this filter. But on the export stage when the filter is applied, MARC
record being processed already does have holdings data fields added in
the previous stage (usually 952 / 995, depending on the MARC format).
Problem is that holdings data fields use to have $9 subfields in them
as well (mapped to item.itemnumber by default). As a consequence, some
(great many in the typical setup) records exported for zebra indexing
may have surplus "see from" fields added erroneously in semi-random
fashion, so biblio searches would often return some completely
unexpected additional results.
EmbedSeeFromHeadings record filter should not process holdings fields
when dealing with MARC records intended for zebra indexing.
To reproduce:
1) database with as many sample or real-world biblio, item and authority
records as possible is recommended for testing purposes
2) enable IncludeSeeFromInSearches
3) export a bunch of biblio records for zebra (e.g.:
misc/migration_tools/rebuild_zebra.pl -I -b -x -k -length=1000),
inspect the result xml records in /tmp/<whatever> file; observe that at
the end of many records, here and there some extra "see from" (= 1st
indicator: 'z') fields tend to appear, which shouldn't be there ;)
To test:
4) apply patch
5) redo 3)
6) compare results from 3) and 5) with diff
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I introduced a regression test for this. You should run the tests
without/with the patch and verify that the patch actually fixes the problem.
Good job Jacek! I'm sure writing the regression test would take less time
than such a detailed commit message!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14456: (regression test) Holdings fields should be skipped by EmbedSeeFromHeadings
This patch introduces a regression test for the situation in which
an itemnumber on a record matches the authid of an authority record
and the current implementation of the EmbedSeeFromHeadings filter
wrongly includes new holding fields with authority data...
To test:
- Apply the patch
- Run:
$ prove t/db_dependent/RecordProcessor_EmbedSeeFromHeadings.t
=> FAIL: The test 'Holdings fields not processed to introduce See-from heading'
fails.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14545: Typo in help file (stage-marc-import.tt)
Typo found in stage-marc-import.tt file for Koha help in 3.20
Test plan:
1) Go to url 'koha-tmpl/intranet-tmpl/prog/en/modules/help/tools/stage-marc-import.tt:28' and check the typo "precendence" or go to Tools > Stage MARC records for import and open up the help
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed.
Sponsored-by: Universidad de El Salvador Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Fri, 26 Jun 2015 12:12:20 +0000 (14:12 +0200)]
Bug 14167: (QA followup) Making Koha::Logger bit more crash resistant
Moving the BEGIN block to _init for the most part. We only need to
initialize when we actually start using the logger.
Removed the third init part. If we do not have a log4perl_conf in the
koha config, we are not using it yet.
Method get uses hash parameters now. It calls init. If we do not have a
config or the logfile is not writable, we will not use log4perl.
Using AUTOLOAD as a wrapper around Log4perl in order to add some checks
that log4perl does not have.
If a logrotate would change file permissions on a default logfile, we
should catch that now too (see recheck).
Test plan:
Run the previous tests again.
Will still add a unit test.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Thu, 14 May 2015 11:04:19 +0000 (07:04 -0400)]
Bug 14167: (QA followup) Add template and changes needed for packages
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: upgraded DEBUG level to WARN in config file. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Marcel de Rooy [Fri, 5 Jun 2015 08:08:22 +0000 (10:08 +0200)]
Bug 14167: (QA followup) Adjust category handling in Koha::Logger
The first patch makes the category parameter mandatory.
This patch makes it optional, falling back to the current package. This is
the expected log4perl model. It would not be necessary to pass the class
name everywhere (check subclasses..)
It also adds a delimiter between the interface and the class name.
The first line would make the logger more sensitive to C4::Auth log
messages while staying at the WARN level for other messages, etc. The
second line makes the trace visible from the renewal example.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Thu, 7 May 2015 15:20:50 +0000 (11:20 -0400)]
Bug 14167: Add Koha::Logger based on Log4perl
Koha needs a better logger, and it seems like the best solution would be
to take advantage of Log4perl which is already a fully featured logger.
We use Log4perl to selectively decide what statements should be logged,
and where they should go!
Test plan:
0) Install Log::Log4perl via packages or cpan
1) Apply this patch and the example renewal patch
2) Copy etc/log4perl.conf to your koha conf directory, edit the paths
to match your current error logs
3) Edit your koha-conf file and add the
<log4perl_conf>/path/to/log4perl.conf</log4perl_conf> line
4) Watch your intranet and opac error logs
5) Perform a renewal via the staff interface, note there is nothing new
in the log file
7) Update the log4perl.conf, change the log level from WARN to TRACE
for both the staff and opac sides
8) Perform a renewal via the staff interface, note the logged lines
9) Perform a renewal via the opac, note the logged lines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended this patch: Moved the renewal stuff to a separate example patch.
And upgraded the DEBUG level to WARN in the log4perl config file. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
adds alphabetical sorting to <select> lists displayed by
preferences.tt. although added for sorting the days of the
week, this may have larger ramifications. haven't been
tested thoroughly, but no apparent breakage seems to be
happening in preferences.
NOTE: Nice tweak. Makes days of week in sensible order.
Properly adds sorting based on documentation that
is really hard to find.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Mark Tompsett [Thu, 24 Apr 2014 23:09:31 +0000 (19:09 -0400)]
Bug 12137: Extend CalendarFirstDayOfWeek to be any day
Mubassir Ahsan asked on the Koha mailing list:
Is there any option to set Saturday as the first day of
the week? Please help me.
CalendarFirstDayOfWeek is currently either Sunday|Monday.
By converting it to 0|1|2|3|4|5|6
(Sunday, Monday, ..., Saturday), we can allow any day of the
week to be the first day of the week in the date picker.
TEST PLAN
---------
1) Backup DB
2) In mysql:
> DELETE FROM systempreferences;
> SOURCE .../installer/data/mysql/sysprefs.sql
> SELECT variable,value FROM systempreferences;
-- It should say 'CalendarFirstDayOfWeek' and '0'
May say '1' if you are using Norwegian.
3) Restore your DB
4) .../installer/data/mysql/updatedatabase.pl
-- If your previous value for 'CalendarFirstDayOfWeek' was
'Sunday', it should be '0'. For 'Monday', it should be '1'.
5) Test an installation with 'de-DE' as the language.
-- The default value should be '1'.
6) Test an installation with 'nb-NO' as the language.
-- The default value should be '1'.
7) In the staff client, confirm that any day of the week is
available in the I18N/L10N system preferences for the
CalendarFirstDayOfWeek dropdown.
-- I'm aware they aren't in order, but I'm after
functionality, not finesse.
8) In another tab, go to a staff place that has a datepicker.
For example, Home -> Tools -> Inventory/stocktaking
9) For each possible value in the CalendarFirstDayOfWeek,
go to the other tab, refresh the page after updating the
system preference, and click the datepicker icon.
-- The date picker should then start on the selected
day of the week.
10) Log into OPAC
-- This may require setting: opacuserlogin to 'Allow'.
11) Click the personal details tab on the left.
12) There is a date picker for the date of birth.
-- The date picker should then start on the selected
day of the week.
13) Run koha QA test tools.
NOTE: not an atomic update, since this is an old patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Tue, 28 Apr 2015 08:10:56 +0000 (10:10 +0200)]
Bug 12054: Inactive vendors should be inactive
This patch make inactive vendors really inactive.
That means an inactive vendor would not be able to add a basket / add an order.
Revised test plan
=================
1/ In the acquisition module create 2 vendors: 1 active and 1 inactive.
2/ On the acqui/booksellers.pl, acqui/uncertainprice.pl,
admin/aqcontract.pl and acqui/supplier.pl (pages which include the
acq toolbar), you should be able to, for both the 'active' as well
as the inactive vendor :
(a) add new basket
(b) add order items to the basket
Remark: This is *wrong*. You should be able to do so only for active
vendor.
3/ Apply the patch
4/ Go to the links in step #2 above and select the inactive vendor
you should no longer be able to:
(a) add new basket
(b) add order items to the basket
Remark: This is the *correct* behaviour
5/ No change should be noted for vendor marked "active", and should
be able to undertake operations 4 (a), 4 (b) and 4 (c).
Remark: This is the *correct* behaviour.
6/ run koha qa tests tool
Bug 12054: (follow-up) Inactive vendors should be inactive
Don't display "add order""block and buttons if the vendor is inactive.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Tue, 16 Jun 2015 23:05:10 +0000 (19:05 -0400)]
Bug 14404: Checkouts default sort order for Self Checkout (SCO) confusing for patrons
Libraries are reporting that patrons are very confused during
self-checkout. The problem is they are expecting the list of checkouts
to be in the order they checked out the items ( first checkout on the
bottom, last item checked out on top ). However, the checkouts
table is sorted by title ( ascending ) then due date ( descending ).
This is not intuitive.
Test Plan:
1) Enable Koha's self checkout
2) Use the SCO to check out a random assortment of items,
make sure you don't check them out in alphabetical order
3) Note the order of the items in the list is not based on the order
you checked them out in
4) Apply this patch
5) Refresh the page
6) Note the items are now in the order you checked them out
with the last on top and the first on bottom
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When creating a new notice, warn is triggered "Argument "" isn't numeric in numeric gt (>) at line 400". Same warn is triggered when changing Koha module option to any other module.
To test:
1) Go to Tools, then Notices & Slips
2) Click 'new notice'. Notice warn in intranet-error.log
3) Change Koha module to another module. Notice warn is triggered for every change
4) Apply patch and reload page
5) Change Koha module to another module. Notice there are no longer warns
6) Go back to Notices & Slips and click 'new notice' again. Notice there are no warns
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Aleisha [Wed, 24 Jun 2015 01:15:32 +0000 (01:15 +0000)]
Bug 14445: Silences warn in letter.pl
When changing Koha module to 'Circulation', there is a warn saying that $code is uninitialized. This patch sets $code to an empty string to silence the warn.
To test:
1) Go to Tools, the Notices & Slips
2) Click 'new notice' (This will trigger warns, but ignore these as they will be corrected in the next patch)
3) Change Koha module to 'Circulation'
4) Notice warn about uninitialized $code variable
5) Apply patch and reload page, change Koha module to 'Circulation'
6) Notice page still works and warns are gone
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
TEST PLAN
---------
1) $ prove t/db_dependent/Auth_with_cas.t
-- CGI security warning
2) apply patch
3) $ prove t/db_dependent/Auth_with_cas.t
-- no noise.
4) koha qa test tools
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Not able to reproduce the error on my setup, but the code
is a clear improvement over the previous version. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Mon, 25 May 2015 11:58:57 +0000 (13:58 +0200)]
Bug 11620: Add dissertation-information index for MARC21 (502)
Bug 11202 introduced a new index 'dissertation-information' for
UNIMARC. This patch adds the index also for MARC21 installations.
http://www.loc.gov/marc/bibliographic/bd502.html
To test:
- Apply patch
- Copy files in etc/zebradb changed by this patch to your
corresponding directory (koha-dev..)
- Make sure you have records with 502
- Reindex
- Verify you can search the field contents with
dissertation-information= and
diss=
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Can find by dissertation-information,
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Tue, 9 Jun 2015 23:43:22 +0000 (01:43 +0200)]
Bug 12352: Patron modification request page: Add link to patron record
The patron modification request page in the staff client does show
the name and home library of a patron, but there is no way to
go to the patron record. This patch adds a link to the patron details.
Extras: changes display of patron name, so a missing firstname won't
result in an extra , showing.
To test:
- Make some update requests from different patron accounts in the OPAC
- Go to the patron modification request page in staff
- Verify a link 'Patron details' now shows on each entry and
works correctly
Followed test plan. Works as expected. QA tools OK. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Not sure the "Patron details" link is at the best place, but I don't
have something better to suggest. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Mon, 13 Jul 2015 14:44:23 +0000 (15:44 +0100)]
Bug 14524: Don't escape query_cgi with uri
According to the doc, we should not escape query_cgi with the uri
filter:
http://www.template-toolkit.org/docs/manual/Filters.html#section_uri
Since query_cgi can contains something like: "idx=kw&q=42", we should
not escape the & char
Test plan:
0/ Don't apply the patch
1/ Go on launch a search at the OPAC
2/ Click on the RSS icon
3/ You should arrive on
opac-search.pl?idx%3Dkw%26q%3D42&count=50&sort_by=acqdate_dsc&format=rss2
The & has been escaped.
4/ Apply the patch
5/ Now you should get result and see an url correctly formatted.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14494: Add some unit tests too for CalcDateDue
The second patch of this report made some changes to CalcDateDue.
We are adding some unit tests here.
See the commments on the third patch too.
Test plan:
Run t/db_dependent/Circulation_dateexpiry.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Set the number of tests for the second subtest (was
commented) and perltidy the second block.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Thu, 9 Jul 2015 08:52:28 +0000 (09:52 +0100)]
Bug 14494: Unit tests for CanBookBeIssued related to dateexpiry
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Moved the test on its own. Nicer than adding TestBuilder in the final part
of the test. No warnings/errors from TestBuilder, no dependency..
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14494: Terribly slow checkout caused by DateTime->new in far future
An expiry date like 9999-12-31 in the local timezone will make DateTime
spend a lot of time (maybe 60 seconds) on date calculation. See the
DateTime documention on CPAN.
A calculation in floating (or alternatively in UTC) would only take
a few milliseconds.
This patch makes two changes in this regard:
[1] The compare between expiry date and today in CanBookBeIssued has been
adjusted in Jonathan's patch. I am moving the compare to the floating
timezone (as was done in my original patch). This removes a hardcoded
9999.
[2] If ReturnBeforeExpiry is enabled, CalcDateDue compares the normal due
date with the expiry date. The comparison is now done in the floating
timezone. If the expiry date is before the due date, it is
returned in the user context's timezone.
NOTE: The calls to set_time_zone moving to or from floating do not adjust
the local time.
TEST PLAN:
First without this patch (and the one from Jonathan):
[1] Set expiry date to 9999-12-31 for a patron.
[2] Enable ReturnBeforeExpiry.
[3] Checkout a book to this patron. This will be (very) slow.
Continue now with this patch applied:
[4] Check in the same book.
[5] Check it out again. Should be much faster.
Bonus test:
[6] Set borrower expiry date to today. Change relevant circulation rule
to loan period of 21 hours. Test checking out with a manual due date
/time just before today 23:59 and after that. In the second case the
due date/time should become today 23:59 (note that 23:59 is not
shown on the checkout form).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Thu, 9 Jul 2015 08:52:28 +0000 (09:52 +0100)]
Bug 14494: Prevent slow checkout if the patron does not have an expiry date
If a patron has a expiry date set to 9999-12-31 (for organizations for
instance), the checkouts are very slow.
It's caused by 2 different calls to DateTime in CanBookBeIssued:
1/
DateTime->new( year => 9999, month => 12, day => 31, time_zone => C4::Context->tz );
The time_zone should not be set (as it's done in Koha::DateUtils), set to UTC or floating tz.
2/
DateTime->compare($today, $expiry_dt)
The comparaison of 2 DT with 1 related to 9999 is very slow, as you can
imagine.
For 1/ we need to call Koha::DateUtils::dt_from_string (actually, we
should never call DateTime directly).
For 2/ we just need to test if the date is != 9999, no need to compare
it in this case.
Test plan:
Before this patch, confirm that the checkouts are slow if the patron has a
dateexpiry set to 9999-12-31.
update borrowers set dateexpiry="9999-12-31" where borrowernumber=42;
After this patch, you should not see any regression when checking out
items to an expired patron and to a valid patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
David Cook [Mon, 13 Jul 2015 04:06:46 +0000 (14:06 +1000)]
Bug 14521: SQL injection in local use system preferences
This patch fixes a SQL injection vulnerability in the local use
system preferences.
_TEST PLAN_
Before applying:
1) Go to Global System Preferences
2) Click on the "Local use" tab
3) Add a new preference with the value "') or '1' = '1' -- "
(be sure to include the space at the end after the comment --).
4) When the page refreshes, you should now see about 99 other system
preferences which shouldn't be showing up.
5) Apply the patch
6) Refresh the page
7) Note that you now only see a system preference for "') or '1' = '1' -- "
and the other actual local use system preferences.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14436: Noisy warns in C4/Utils/DataTables/Members.pm
TEST PLAN
---------
1) Backup the koha intranet error log.
2) Empty the koha intranet error log.
3) In staff client, go to Patrons
(/cgi-bin/koha/members/members-home.pl)
4) Pick any letter to 'Browse by last name'
-- koha intranet error log now has warns.
-- the one of importance is the uninitalized value.
5) Empty the koha intranet error log.
6) apply this patch
7) Repeat steps 3 & 4.
-- koha intranet error log does not contain the
uninitialized value error.
8) run koha qa test tools.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
NOTE: I applied 14428, and then did what I suggested in comment #2.
Only intranetdir references appeared.
I applied this patch, and repeated.
Nothing appeared. This means the autoload references are
properly removed.
koha qa test tools complained about whitespace, I just fixed
those. Though, we may wish to perltidy
auth_fields_substructure.pl on another bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Wed, 24 Jun 2015 09:24:14 +0000 (11:24 +0200)]
Bug 14449: Add authentication check on retrieving item info when receiving
The script catalogue/getitem-ajax.pl is called by acqui/orderreceive.pl
when item is receipt.
There is not auth check done, this means anybody can retrieve item info.
Test plan:
With the acquisition => order_receive permission, try to receive an
item.
It should work.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Very easy to test.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Tue, 9 Jun 2015 00:44:48 +0000 (02:44 +0200)]
Bug 14303: Fix item search CSV export - obsolete "by" and display of publication year for MARC21
The exported CSV file from the item search didn't display the publication
year in MARC21 installations and the title always contained 'by'
even if there was no author information to display. Also the by is
not needed by MARC21 as the data should include punctuation.
This basically copies the changes done to the JSON format
on bug 13859 to the CSV include.
To test: Switch from 'Screen' to 'CSV'
- Check publication date always displays (MARC21 and UNIMARC)
- Check that for MARC21 the 'by' has been removed from the title information
- Check that for UNIMARC the 'by' only displays when there is also
an author to display
Tested for MARC21, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Fri, 10 Jul 2015 05:08:29 +0000 (01:08 -0400)]
Bug 14428: Remove C4::Input
Jonathan Druart agreed that C4::Input is vestigial code that should be removed.
Here is how I checked. First I found where C4::Input was used. Then, I checked
what functions are in the package: just checkdigit. Then, I confirmed that
checkdigit is not used at all in any acquisition, administration, or member
related perl scripts. Lastly, I took a look at our supposed test file for the
package. It was painfully sparse.
As such, this patch removes the test file and the package file, and removes
C4::Input references from these six files:
- acqui/addorderiso2709.pl
- acqui/basketgroup.pl
- acqui/neworderempty.pl
- acqui/uncertainprice.pl
- admin/aqplan.pl
- members/memberentry.pl
NOTE: neworderempty had 3 lines of it?! Didn't anyone see that?!
Here is the output of what I did to confirm this correction:
mtompset@debian:~/kohaclone$ git reset --hard origin/master
HEAD is now at 6e9086f Bug 3206: (QA followup) missing comma on sysprefs.sql
mtompset@debian:~/kohaclone$ git grep C4::Input
C4/Input.pm:package C4::Input; #assumes C4/Input
C4/Input.pm:C4::Input - Miscellaneous sanity checks
C4/Input.pm: use C4::Input;
acqui/addorderiso2709.pl:use C4::Input;
acqui/basketgroup.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/uncertainprice.pl:use C4::Input;
admin/aqplan.pl:use C4::Input;
members/memberentry.pl:use C4::Input;
t/Input.t: use_ok('C4::Input');
mtompset@debian:~/kohaclone$ grep sub C4/Input.pm
sub checkdigit ($;$) {
my $temp2 = substr($infl,$i,1);
if ($rem eq substr($infl,8,1)) {
} # sub checkdigit
mtompset@debian:~/kohaclone$ grep checkdigit `find acqui -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find admin -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find members -type f`
mtompset@debian:~/kohaclone$ cat t/Input.t
use strict;
use warnings;
use Test::More tests => 1;
BEGIN {
use_ok('C4::Input');
}
Apply this patch, and the output of git grep C4::Input will be empty.
Run koha qa test tools (kind of overkill)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Get notes and subjects from MARC record
ONLY when XSLT is not activated.
It's useless doing it when XSLT is activated,
because XSLT takes care of it by its own.
=> With this patch, we are saving precious
milliseconds
I compared the display of some records in XSLT view with and without patch, was the same (as expected). Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
On a slower server, I saw a time save of 0.0274 to 0.0908 seconds (with XSLT). Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14508: 'New patron' dropdown empty list on circulation.pl
This patch makes includes/patron-toolbar.inc (the one in charge of
rendering the 'New patron' dropdown) make use of the Categories
Template Toolkit plugin to create the list of categories.
(1) To check the setup is sane:
- Go to the Patrons page
=> SUCCESS: The 'New patron' dropdown is populated
- Click on the [+] symbol on the Patron search on the top
=> SUCCESS: The Categories dropdown is populated
(2) To test the patch:
- On the checkout form, perform a patron search that
(a) returns more than one result
(b) returns zero results
- Click the dropdown menu to create a new patron
=> FAIL: Dropdown is empty
- Repeat for (a) or (b)
- Apply the patch and reload
=> SUCCESS: The dropdown is correctly populated
- Repeat (1)
=> SUCCESS: Nothing got broken
- Verify the logs
=> SUCCESS: No new warnings
- Sign off :-D
- Get a cookie
- Smile
Regards
Discussion: we might need a new bug to start cleaning stuff like this:
but it belongs to a new bug me thinks. Well, suggestions are welcome, but this must
be fixed on stable ASAP so hurry :-D
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Nicole C. Engard [Tue, 23 Jun 2015 19:49:55 +0000 (14:49 -0500)]
Bug 14424: Add on site checkouts help for 3.20
There is no help for the pending on site checkouts report. This patch
adds it.
To test:
* visit pending on site checkouts
* click help
* confirm help is there and correct
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Nicole C. Engard [Tue, 23 Jun 2015 19:44:11 +0000 (14:44 -0500)]
Bug 14424: Update Acq Help for 3.20
This patch adds the missing order from subscription help and updates basket
help.
To test:
* Visit a basket, review the help
* Click order from a subscrption, review the help
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Nicole C. Engard [Tue, 23 Jun 2015 19:31:15 +0000 (14:31 -0500)]
Bug 14424: Update Discharge Help for 3.20
This patch adds the missing discharge help file and updates the moremember file with
info on discharges.
To test:
* Visit a patron
* View and confirm help is right
* Visit the discharge page on the patron
* Confirm help file loads and is right
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Nicole C. Engard [Tue, 23 Jun 2015 18:00:06 +0000 (13:00 -0500)]
Bug 14424: Update cataloging help for 3.20
This patch updates 3 help files for catalolging in 3.20
To test:
* Visit
* cataloging home
* cataloging a new record
* mergin bib records
* Confirm text is right and visible
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Nicole C. Engard [Tue, 23 Jun 2015 17:45:17 +0000 (12:45 -0500)]
Bug 14424: Patron Help Files for 3.20
This patch updates the help files for 3.20
To test:
* Visit
* Main patron page
* Patron search page
* Patron permissions page
* Confirm the text is right on all three
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14485: HTML comment disables translation in cataloguing/addbooks.tt
In cataloguing/addbooks.tt, the line :
[% total %] result(s) found in catalog,
is not present in PO files even after an update.
I've found that the cause is the previous HTML comment line.
This patch converts HTML comment into TT comment and adds a div to have a more comprehensive string to translate.
Test plan :
- without patch
- go into <sources>/misc/translator
- run PO update for example in french : translate update fr-FR
=> the text "result(s) found in catalog" is missing from PO file : fr-FR-staff-prog.po
- restore default PO files
- apply patch
- go into <sources>/misc/translator
- run PO update for example in french : translate update fr-FR
=> You find text "result(s) found in catalog" in PO file : fr-FR-staff-prog.po
Sponsored-by: Universidad de El Salvador Signed-off-by: Hector Eduardo Castro Avalos <hector.hecaxmmx@gmail.com>
Works as advertised. Just one msgid appear with msgid "%s result(s) found in catalog,"
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 3206: (QA followup) OAI repository deleted records support.
- Fix QA.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New pref in right order, new option 'no' on syspref, other
fixes following comment #12
All seems to work
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows Koha OAI repository to support deleted records.
The OAI-PMH:DeletedRecord syspref is introduced and can be set to:
- persistent (in case Koha's deletedbiblio table will never be emptied
or truncated)
- transient (in case Koha's deletedbiblio table might be emptied or
truncated at some point)
Test plan:
- After applying the patch, test that:
- Deleted records appear in ListRecords and ListIdentifiers requests.
- Filter parameters (from, until, set and resumptionToken) still work
and are applied to ListRecords and ListIdentifiers requests.
- Identify request shows if the repository is considered persistent
or transient, according to the OAI-PMH:DeletedRecord syspref.
- Deleted records that used to belong to a set are still displayed in
those sets and marked as deleted.
- GetRecord requests work on deleted records, which are marked as deleted.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works in all situations described in the test plan. Great addition.
Thanks.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Cook [Tue, 9 Jun 2015 04:25:23 +0000 (14:25 +1000)]
Bug 14366: Units doesn't get saved usefully for patroncards
This patch causes the "Units" to be saved and displayed correctly
for the "Edit layout" screen in Patroncards.
_TEST PLAN_
Before applying:
0) Create a new layout
1) Edit the layout, change the units, and click Save
2) Edit the layout again, and notice the units are still "PostScript Points"
Apply the patch:
3) Edit the layout again, change the units, and click Save
4) Edit the layout again, note that the units have changed to your
selection
5) Rejoice
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 17 Jun 2015 01:48:18 +0000 (21:48 -0400)]
Bug 13950: Sort Item search home library list by branch name
On the item search form the list of home libraries isn't sorted
alphabetically by their descrption.
To test:
- Ensure that you have libraries whose code/name are sorted in a different alphabetical order (e.g. Aardvark/ZZZ & Zebra/AAA)
- Staff: Advanced search - item search
- See that libraries are sorted in code order
- Apply patch
- Verify selection block for home library is correctly sorted after
applying the patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sun, 31 May 2015 13:52:26 +0000 (15:52 +0200)]
Bug 14163: Acq - receive shipment and order from staged: rename 'Show all' to 'Show inactive'
'Show all' in acquisition makes the inactive funds in the fund list
box visible. This patch changes the text to 'Show inactive' to be more
clear about the functionality.
Patch changes 2 pages. To test:
1) Order from staged file
- make sure you have uploaded a few records via the tools
- create a new order using the 'From a staged file' option
- select a file to order from - 'Add orders'
- Verify the 'Select to import' tab now displayed the text
'Show inactive funds' and that it works as expected
- Switch to the 'Default accounting details' tab
- Verify the text there is also changed to 'Show inactive' and
works like expected.
2) Receive shipment
- receive a new shipment for a vendor with unreceived orders
- Verify the label next to the fund list has changed to
'Show inactive' and works as expected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Simple string change, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Mon, 25 May 2015 08:45:54 +0000 (10:45 +0200)]
Bug 14163: Acq order form: rename 'Show all' to 'Show inactive'
On the order form there is a checkbox next to the fund list labelled
'show all'. Checking the checkbox will result in the inactive funds
showing in the pull down list as well.
The patch renames the label to 'Show inactive' to make the purpose
more clear.
To test:
- Create a new order
- Verify the label has changed as described above
- Decide if the change makes sense
Signed-off-by: tadeasm <tadeas.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mirko Tietgen [Thu, 25 Jun 2015 13:38:42 +0000 (15:38 +0200)]
Bug 14453: (followup) Fix shipped XSLT files
Make the shipped XSLTs for authorities (MARC21 and UNIMARC) the same as the generated version
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fridolin Somers [Wed, 24 Jun 2015 14:06:05 +0000 (16:06 +0200)]
Bug 14453: kohaidx is missing for id in authority-koha-indexdefs.xml
In authority-koha-indexdefs.xml, all tags use the namespace "kohaidx" except the tag "id".
When re-generating authority-zebra-indexdefs.xsl, the line :
<xslo:variable name="idfield" select="normalize-space(marc:controlfield[@tag='001'])"/>
is modified :
<xslo:variable name="idfield" select="normalize-space()"/>
This is an error.
This patch adds kohaidx namespace to correct.
Test plan :
- Without patch
- go to etc/zebradb/marc_defs/marc21/authorities/
- run : xslproc xsltproc ../../../xsl/koha-indexdefs-to-zebra.xsl authority-koha-indexdefs.xml > authority-zebra-indexdefs.xsl
- read authority-zebra-indexdefs.xsl
=> the line has changed : <xslo:variable name="idfield" select="normalize-space()"/>
- Apply patch
- go to etc/zebradb/marc_defs/marc21/authorities/
- run : xslproc xsltproc ../../../xsl/koha-indexdefs-to-zebra.xsl authority-koha-indexdefs.xml > authority-zebra-indexdefs.xsl
- read authority-zebra-indexdefs.xsl
=> the line has not changed
(same for unimarc flavor)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
As Mirko mentioned, the xslt's now generate the facet-processing templates in
the authority xslt's too. They are harmless because we don't define facets
for authority records. If we did, it would be harmless too.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Winona Salesky [Thu, 4 Jun 2015 02:46:23 +0000 (22:46 -0400)]
Bug 14326: XSLT Syntax error in MARC21slimOPACResults.xsl
Test Plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac record details
3) Perform an opac search check "Availability" for expected display values.
5) Note this patch corrects invalid syntax in xslt, there should be no visable changes to the results page.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Tue, 26 May 2015 10:10:50 +0000 (12:10 +0200)]
Bug 14189: Use keep_text for the authority header
includes/authorities-search.inc already used the same behavior but with
another method.
For consistency it's better to have only 1 way to do that.
Test plan:
Go on the authority home page
Fill the input in the header and click on tab 'search all headings' and
'keyword search' and confirm that the text you have filled is kept.
I tested after applying the patch and the text is kept after removing the
part from authorities-search.inc. I also tried applying that jQuery solution
instead of my JS loop but could not get it to work for the other pages with
a reasonable ammount of effort.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Eivin Giske Skaaren <eskaaren@yahoo.no> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14189: Made text persist when clicking the tabs under the searchbox
To test:
Apply the patch and see that the text now is there in the search
box when clicking the tabs: check in, check out etc..
(More files changed for persistent text in searchbox)
Sponsored-by: Halland County Library Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This is something I have wanted quite a few times over the years...
Tested by going to every main area of Koha, entering some random
text into the search box and then clicking on all the available tabs
to check that the entered text is carried over to all the boxes.
There are a couple of places where text is not carried over, but I
guess that might be because one of the boxes is structurally
different to the others. These are:
- "Vendor search" and "Orders search" in Acquisitions
- "Search subscriptions" in Serials
I have not looked at how this is implemented, just that it works as
it should.
Bug 14189 refactor after failed QA.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Amended patch: replace tabs with spaces
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mark Tompsett [Fri, 5 Jun 2015 16:24:22 +0000 (12:24 -0400)]
Bug 14345: broken isbn logic prevents display of idreambooks image
TEST PLAN
---------
1) Ensure you have a book that would pull up an idreambooks image
(e.g. The road to character / David Brooks.)
-- I imported from the Library of Congress via z39.50
2) Ensure your system preferences for idreambook stuff is set.
3) Ensure you have multiple 020$a's for your book, and
the first one must just be an ISBN number!
-- I removed the '(hardcover: acidfree paper)' from the first.
-- I took the second 020 field and changed 020$z to 020$a
4) Search for that book in OPAC and go to details.
-- There should be a readometer image, but it will be broken.
-- Notice the ISBN line has "#############; ..."
This could also be attained by just putting two semi-colon
separated ISBN's on the first 020$a.
5) Apply this patch
6) Refresh page
-- readometer image appears. YAY!
7) run koha qa test tools
NOTE: Only changed test plan, so leaving sign-off on.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Julian FIOL [Tue, 26 May 2015 12:49:20 +0000 (14:49 +0200)]
Bug 14207: Improving circulation performance
by caching yaml file This patch improve circulation performance by caching yaml file With this patch we saved between 300ms and 500ms on circulation page.
Following Comment #3 :
No useless warn
No tidy
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Less lines, same result.
Comments were useful on testing :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14135: Adds 'Free' to variabletypes in systempreferences.tt
The 'Local Use' system preference addition/modification template provides the following options against "Variable Type" - Choice, YesNo, Integer, Textarea, Float, Themes, Languages, Upload or ClassSource.
There is no option presented for "Free" which seems to be the most
used variable type out-of-the-box (i.e. INTRAdidyoumean,
OPACdidyoumean, UsageStatsID and UsageStatsLastUpdateTime)
This trivial patch proposes to modify the systempreferences.tt
and add the option 'Free' to the list offered to users.
Test Plan
=========
1/ Go to Home > Administration > System preferences > Local use
2/ Click on 'New preference'.
3/ In the fieldset 'Koha Internal', the variable types offered
are Choice, YesNo, Integer, Textarea, Float, Themes,
Languages, Upload or ClassSources.
4/ Clicking on 'Choice' should set the 'preftype' field as
'Choice'.
5/ Apply this patch.
6/ Refresh the page.
7/ The variable types list should read - "Free, Choice, YesNo,
Integer, Textarea, Float, Themes, Languages, Upload or
ClassSources".
8/ Clicking on 'Free' should set the 'preftype' field as 'Free'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Discovered that there is no validation on the type field.
However, that is beyond the scope of this bug.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The regex /|date>>/ will match much more than you like :)
The unescaped pipe is bad, but you also need to remove the >> because
the split a few lines above it removes them already.
This allows you to recover from an error like this one, running another
report with a string parameter:
The given date (india%) does not match the date format (us) at
Koha/DateUtils.pm line 144.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended for possible spaces around the word date. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Wed, 24 Jun 2015 16:13:46 +0000 (12:13 -0400)]
Bug 14382: Non-ISO Date parameters generate empty reports.
The issue is that SQL expects ISO dates, but the user may wish to view dates according to the dateformat system preference.
By detecting a date preference, the non-ISO dates can be converted to ISO dates before being stuffed back into the SQL query to be executed.
TEST PLAN
---------
1) Add a report with date parameters.
-- I used 'Holds placed in date range' from
http://wiki.koha-community.org/wiki/SQL_Reports_Library
2) Set your dateformat to YYYY-MM-DD
3) Run the report
-- Note the SQL reads
"... BETWEEN '{date formatted in YYYY-MM-DD}'..."
-- If there is supposed to be data, there is some.
4) Set your dateformat to MM/DD/YYYY
5) Run the report
-- Note the SQL reads
"... BETWEEN '{date formatted in MM/DD/YYYY}'..."
-- If there is supposed to be data, there is none.
6) Apply patch
7) Repeat steps 2-5
-- The SQL will always read YYYY-MM-DD (ISO) format.
-- The report will have data, if there is some.
8) koha qa test tools.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adding a QA follow-up. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Fri, 19 Jun 2015 18:00:13 +0000 (14:00 -0400)]
Bug 14427: Use Koha::version instead of C4::Context->KOHAVERSION
While testing bug 9006, I discovered this gem in
installer/install.pl
TEST PLAN
---------
1) back up DB
2) drop db and create db
3) git reset --hard origin/3.20.x
4) run web installer and all sample data
5) git reset --hard origin/master
6) empty your koha intranet error log
7) run web installer to upgrade
-- there will be warnings regarding regex around
installer/install.pl line 328 or so.
grep "\$kohaversion" ~/koha-dev/var/logs/koha-error_log
8) repeat steps 2-6
9) apply this patch
10) run web installer to upgrade
-- no regex warnings.
grep "\$kohaversion" ~/koha-dev/var/logs/koha-error_log
11) koha qa test tools
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
projects / koha.git / log