1 # Copyright 2007 MJ Ray
3 # This file is part of Koha.
5 # Koha is free software; you can redistribute it and/or modify it under the
6 # terms of the GNU General Public License as published by the Free Software
7 # Foundation; either version 2 of the License, or (at your option) any later
10 # Koha is distributed in the hope that it will be useful, but WITHOUT ANY
11 # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12 # A PARTICULAR PURPOSE. See the GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License along
15 # with Koha; if not, write to the Free Software Foundation, Inc.,
16 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
18 # Current maintainer MJR http://mjr.towers.org.uk/
23 use ExtUtils::MakeMaker;
27 use FindBin; # we need to enforce which C4::Installer::PerlModule is used in case more than one is installed
29 use lib $FindBin::Bin;
33 my $koha_pm = C4::Installer::PerlModules->new;
36 die "perl 5.10 or later required" unless ($] >= 5.010000);
38 # Hash up directory structure & files beginning with the directory we were called from (should be the base of koha)...
40 my $dirtree = hashdir('.');
45 Makefile.PL - Koha packager and installer
49 =head2 BASIC INSTALLATION
56 =head2 UPGRADE INSTALLATION
58 NOTE: This option is only available if koha-install-log exists.
60 perl Makefile.PL --prev-install-log /path/to/koha-install-log
66 =head2 PACKAGING RELEASE TARBALLS
77 This is a packager and installer that uses
78 ExtUtils::MakeMaker, which is fairly common
80 As well as building tar or zip files
81 and installing with the above commands,
82 it allows us to check pre-requisites
83 and generate configuration files.
87 =head2 NAME, VERSION_FROM, ABSTRACT, AUTHOR
89 Basic metadata about this software.
93 Suppress generation of META.yml file.
97 Hash of perl modules and versions required.
101 Hash of file mappings
105 This is a hash of PL scripts to run after installation and
106 the files to ask them to generate.
107 Maybe use the values from CONFIGURE
108 to generate initial configuration files in future.
114 This is a hash mapping directories and files in the
115 source tree to installation target directories. The rules
116 for this mapping are:
120 =item If a directory or file is specified, it and its
121 contents will be copied to the installation target directory.
123 =item If a subdirectory of a mapped directory is specified,
124 its target overrides the parent's target for that subdirectory.
126 =item The value of each map entry may either be a scalar containing
127 one target or a reference to a hash containing 'target' and 'trimdir'
130 =item Any files at the top level of the source tree that are
131 not included in the map will not be installed.
133 =item Any directories at the top level of the source tree
134 that are not included in the map will be installed in
135 INTRANET_CGI_DIR. This is a sensible default given the
136 current organization of the source tree, but (FIXME) it
137 would be better to reorganize the source tree to better
138 match the installation system, to allow adding new directories
139 without having to adjust Makefile.PL each time. The idea
140 is to make the C<$target_map> hash as minimal as possible.
144 The permitted installation targets are:
148 =item INTRANET_CGI_DIR
150 CGI scripts for intranet (staff) interface.
152 =item INTRANET_TMPL_DIR
154 HTML templates for the intranet interface.
156 =item INTRANET_WWW_DIR
158 HTML files, images, etc. for DocumentRoot for the intranet interface.
162 CGI scripts for OPAC (public) interface.
166 HTML templates for the OPAC interface.
170 HTML files, images, etc. for DocumentRoot for the OPAC interface.
172 =item PERL_MODULE_DIR
174 Perl modules (at present just the C4 modules) that are intimately
175 tied to Koha. Depending on the installation options, these
176 may or may not be installed one of the standard directories
177 in Perl's default @LIB.
181 Directory for Koha configuration files.
185 Directory for Zebra configuration files.
189 Directory for Zebra's lock files.
193 Directory for Zebra's data files.
197 Directory for Zebra's UNIX-domain sockets.
201 Directory for for miscellaenous scripts, among other
202 things the translation toolkit and RSS feed tools.
206 Directory for command-line scripts and daemons to
207 be set up all for installation modes.
209 =item SCRIPT_NONDEV_DIR
211 Directory for command-line scripts that should
212 be installed in the same directory as the
213 SCRIPT_DIR target except 'dev' installs.
217 Directory for man pages created from POD -- will mostly
218 contain information of interest to Koha developers.
222 Directory for Koha documentation accessed from the
223 command-line, e.g., READMEs.
227 Directory for Apache and Zebra logs produced by Koha.
231 Directory for backup files produced by Koha.
233 =item PAZPAR2_CONF_DIR
235 Directory for PazPar2 configuration files.
239 This is a dummy target used to explicitly state
240 that a given file or directory is not to be installed.
241 This is used either for parts of the installer itself
242 or for development tools that are not applicable to a
243 production installation.
250 './about.pl' => 'INTRANET_CGI_DIR',
251 './acqui' => 'INTRANET_CGI_DIR',
252 './admin' => 'INTRANET_CGI_DIR',
253 './authorities' => 'INTRANET_CGI_DIR',
254 './basket' => 'INTRANET_CGI_DIR',
255 './C4' => 'PERL_MODULE_DIR',
256 './C4/SIP/t' => 'NONE',
257 './C4/SIP/koha_test' => 'NONE',
258 './C4/tests' => 'NONE',
259 './catalogue' => 'INTRANET_CGI_DIR',
260 './cataloguing' => 'INTRANET_CGI_DIR',
261 './changelanguage.pl' => 'INTRANET_CGI_DIR',
262 './check_sysprefs.pl' => 'NONE',
263 './circ' => 'INTRANET_CGI_DIR',
264 './offline_circ' => 'INTRANET_CGI_DIR',
265 './edithelp.pl' => 'INTRANET_CGI_DIR',
266 './etc' => { target => 'KOHA_CONF_DIR', trimdir => -1 },
267 './etc/zebradb' => { target => 'ZEBRA_CONF_DIR', trimdir => -1 },
268 './etc/pazpar2' => { target => 'PAZPAR2_CONF_DIR', trimdir => -1 },
269 './help.pl' => 'INTRANET_CGI_DIR',
270 './installer-CPAN.pl' => 'NONE',
271 './installer' => 'INTRANET_CGI_DIR',
272 './errors' => {target => 'INTRANET_CGI_DIR'},
273 './Koha' => 'PERL_MODULE_DIR',
274 './koha-tmpl/intranet-tmpl' => {target => 'INTRANET_TMPL_DIR', trimdir => -1},
275 './koha-tmpl/opac-tmpl' => {target => 'OPAC_TMPL_DIR', trimdir => -1},
276 './kohaversion.pl' => 'INTRANET_CGI_DIR',
277 './labels' => 'INTRANET_CGI_DIR',
278 './mainpage.pl' => 'INTRANET_CGI_DIR',
279 './Makefile.PL' => 'NONE',
280 './MANIFEST.SKIP' => 'NONE',
281 './members' => 'INTRANET_CGI_DIR',
282 './misc' => { target => 'SCRIPT_NONDEV_DIR', trimdir => -1 },
283 './misc/bin' => { target => 'SCRIPT_DIR', trimdir => -1 },
284 './misc/release_notes' => { target => 'DOC_DIR', trimdir => 2 },
285 './misc/translator' => { target => 'MISC_DIR', trimdir => 2 },
286 './misc/koha-install-log' => { target => 'MISC_DIR', trimdir => -1 },
287 './misc/installer_devel_notes' => 'NONE',
288 './opac' => 'OPAC_CGI_DIR',
289 './README.txt' => 'NONE',
290 './patroncards' => 'INTRANET_CGI_DIR',
291 './reports' => 'INTRANET_CGI_DIR',
292 './reserve' => 'INTRANET_CGI_DIR',
293 './reviews' => 'INTRANET_CGI_DIR',
294 './rewrite-config.PL' => 'NONE',
295 './reviews' => 'INTRANET_CGI_DIR',
296 './serials' => 'INTRANET_CGI_DIR',
297 './services' => 'INTRANET_CGI_DIR',
299 './skel/var/log/koha' => { target => 'LOG_DIR', trimdir => -1 },
300 './skel/var/spool/koha' => { target => 'BACKUP_DIR', trimdir => -1 },
301 './skel/var/run/koha/zebradb' => { target => 'ZEBRA_RUN_DIR', trimdir => -1 },
302 './skel/var/lock/koha/zebradb/authorities' => { target => 'ZEBRA_LOCK_DIR', trimdir => 6 },
303 './skel/var/lib/koha/zebradb/authorities/key' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
304 './skel/var/lib/koha/zebradb/authorities/register' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
305 './skel/var/lib/koha/zebradb/authorities/shadow' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
306 './skel/var/lib/koha/zebradb/authorities/tmp' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
307 './skel/var/lock/koha/zebradb/biblios' => { target => 'ZEBRA_LOCK_DIR', trimdir => 6 },
308 './skel/var/lib/koha/zebradb/biblios/key' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
309 './skel/var/lib/koha/zebradb/biblios/register' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
310 './skel/var/lib/koha/zebradb/biblios/shadow' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
311 './skel/var/lib/koha/zebradb/biblios/tmp' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
312 './sms' => 'INTRANET_CGI_DIR',
313 './suggestion' => 'INTRANET_CGI_DIR',
314 './svc' => 'INTRANET_CGI_DIR',
316 './tags' => 'INTRANET_CGI_DIR',
317 './tmp' => 'NONE', # FIXME need to determine whether
318 # Koha generates any persistent temp files
319 # that should go in /var/tmp/koha
320 './tools' => 'INTRANET_CGI_DIR',
321 './virtualshelves' => 'INTRANET_CGI_DIR',
322 './xml_sax.pl' => 'PERL_MODULE_DIR',
323 # ignore files and directories created by the install itself
324 './pm_to_blib' => 'NONE',
328 =head1 CONFIGURATION OPTIONS
330 The following configuration options are used by the installer.
336 Specifies whether installation will be FHS-compliant (default,
337 assumes user has root), put everything under
338 a single directory (for users installing on a web host
339 that allows CGI scripts and a MySQL database but not root
340 access), or development (for a developer who wants to run
341 Koha from a git clone with no fuss).
345 Directory under which most components will go. Default
346 value will vary depending on INSTALL_MODE.
350 Type of DBMS (e.g., mysql or Pg).
358 Port that DBMS server is listening on.
362 Name of the DBMS database for Koha.
366 Name of DBMS user account for Koha's database.
370 Pasword of DMBS user account for Koha's database.
374 Whether to install Zebra configuration files and data
377 =item ZEBRA_MARC_FORMAT
379 Specifies format of MARC records to be indexed by Zebra.
383 Specifies primary language of records that will be
388 Internal Zebra user account for the index.
392 Internal Zebra user account's password.
396 System user account that will own Koha's files.
400 System group that will own Koha's files.
406 # default configuration options
407 my %config_defaults = (
408 'DB_TYPE' => 'mysql',
409 'DB_HOST' => 'localhost',
411 'DB_USER' => 'kohaadmin',
412 'DB_PASS' => 'katikoan',
413 'INSTALL_ZEBRA' => 'yes',
414 'INSTALL_SRU' => 'yes',
415 'INSTALL_PAZPAR2' => 'no',
416 'AUTH_INDEX_MODE' => 'dom',
417 'BIB_INDEX_MODE' => 'dom',
418 'ZEBRA_MARC_FORMAT' => 'marc21',
419 'ZEBRA_LANGUAGE' => 'en',
420 'ZEBRA_TOKENIZER' => 'chr',
421 'ZEBRA_USER' => 'kohauser',
422 'ZEBRA_PASS' => 'zebrastripes',
423 'ZEBRA_SRU_HOST' => 'localhost',
424 'ZEBRA_SRU_BIBLIOS_PORT' => '9998',
425 'ZEBRA_SRU_AUTHORITIES_PORT' => '9999',
426 'KOHA_USER' => 'koha',
427 'KOHA_GROUP' => 'koha',
428 'MERGE_SERVER_HOST' => 'localhost',
429 'MERGE_SERVER_PORT' => '11001',
430 'PAZPAR2_HOST' => 'localhost',
431 'PAZPAR2_PORT' => '11002',
432 'RUN_DATABASE_TESTS' => 'no',
433 'PATH_TO_ZEBRA' => '',
434 'USE_MEMCACHED' => 'no',
435 'MEMCACHED_SERVERS' => '127.0.0.1:11211',
436 'MEMCACHED_NAMESPACE' => 'KOHA'
439 # set some default configuration options based on OS
440 # more conditions need to be added for other OS's
441 # this should probably also incorporate usage of Win32::GetOSName() and/or Win32::GetOSVersion()
442 # to allow for more granular decisions based on which Win32 platform
444 warn "Your platform appears to be $^O.\n" if $DEBUG;
446 if ( $^O eq 'MSWin32' ) {
447 # Most Unix2Win32 ports seem to poke everything into the Program Files directory
448 # this could be changed to put some files (ie. libraries) into system32, etc.
449 $config_defaults{'INSTALL_MODE'} = 'single';
450 $config_defaults{'INSTALL_BASE'} = 'c:/progra~1/koha'; # Use 8.3 names to be safe...
452 elsif ( $^O eq 'cygwin' ) {
453 # Most Unix2Win32 ports seem to poke everything into the Program Files directory
454 # this could be changed to put some files (ie. libraries) into system32, etc.
455 $config_defaults{'INSTALL_MODE'} = 'single';
456 $config_defaults{'INSTALL_BASE'} = 'c:/progra~1/koha'; # Use 8.3 names to be safe...
459 $config_defaults{'INSTALL_MODE'} = 'standard';
460 $config_defaults{'INSTALL_BASE'} = '/usr/share/koha';
463 # valid values for certain configuration options
464 my %valid_config_values = (
465 'INSTALL_MODE' => { 'standard' => 1, 'single' => 1, 'dev' => 1 },
466 'DB_TYPE' => { 'mysql' => 1, 'Pg' => 1 },
467 'INSTALL_ZEBRA' => { 'yes' => 1, 'no' => 1 },
468 'INSTALL_SRU' => { 'yes' => 1, 'no' => 1 },
469 'AUTH_INDEX_MODE' => { 'grs1' => 1, 'dom' => 1 },
470 'BIB_INDEX_MODE' => { 'grs1' => 1, 'dom' => 1 },
471 'ZEBRA_MARC_FORMAT' => { 'marc21' => 1, 'normarc' => 1, 'unimarc' => 1 }, # FIXME should generate from contents of distributation
472 'ZEBRA_LANGUAGE' => { 'en' => 1, 'fr' => 1, 'nb' => 1 }, # FIXME should generate from contents of distribution
473 'ZEBRA_TOKENIZER' => { chr => 1, icu => 1 },
474 'RUN_DATABASE_TESTS' => { 'yes' => 1, 'no' => 1 },
475 'USE_MEMCACHED' => { 'yes' => 1, 'no' => 1 },
478 # get settings from command-line
479 my $koha_install_log = "";
480 Getopt::Long::Configure('pass_through');
481 my $results = GetOptions(
482 "prev-install-log=s" => \$koha_install_log
485 my %install_log_values = ();
486 if ($koha_install_log ne "") {
487 get_install_log_values($koha_install_log, \%install_log_values);
490 my %config = get_configuration(\%config_defaults, \%valid_config_values, \%install_log_values);
491 my ($target_directories, $skip_directories) = get_target_directories(\%config);
492 display_configuration(\%config, $target_directories);
494 get_file_map($target_map, $dirtree, $file_map, $config{'INSTALL_ZEBRA'} eq "yes" ? 1: 0);
497 'rewrite-config.PL' => [
498 'blib/KOHA_CONF_DIR/koha-conf.xml',
499 'blib/KOHA_CONF_DIR/koha-httpd.conf',
500 'blib/ZEBRA_CONF_DIR/etc/default.idx',
501 'blib/MISC_DIR/koha-install-log'
503 'fix-perl-path.PL' => [ # this script ensures the correct shebang line for the platform installed on...
508 if ($config{'INSTALL_ZEBRA'} eq "yes") {
509 push @{ $pl_files->{'rewrite-config.PL'} }, (
510 'blib/ZEBRA_CONF_DIR/etc/passwd',
511 'blib/ZEBRA_CONF_DIR/zebra-biblios.cfg',
512 'blib/ZEBRA_CONF_DIR/zebra-biblios-dom.cfg',
513 'blib/ZEBRA_CONF_DIR/zebra-authorities.cfg',
514 'blib/ZEBRA_CONF_DIR/zebra-authorities-dom.cfg',
515 'blib/ZEBRA_CONF_DIR/explain-authorities.xml',
516 'blib/ZEBRA_CONF_DIR/explain-biblios.xml',
517 'blib/ZEBRA_CONF_DIR/retrieval-info-auth-grs1.xml',
518 'blib/ZEBRA_CONF_DIR/retrieval-info-auth-dom.xml',
519 'blib/ZEBRA_CONF_DIR/retrieval-info-bib-grs1.xml',
520 'blib/ZEBRA_CONF_DIR/retrieval-info-bib-dom.xml',
522 push @{ $pl_files->{'rewrite-config.PL'} }, (
523 'blib/SCRIPT_DIR/koha-zebra-ctl.sh',
524 'blib/SCRIPT_DIR/koha-pazpar2-ctl.sh',
526 if ($config{'INSTALL_PAZPAR2'} eq 'yes') {
527 push @{ $pl_files->{'rewrite-config.PL'} }, (
528 'blib/PAZPAR2_CONF_DIR/koha-biblios.xml',
529 'blib/PAZPAR2_CONF_DIR/pazpar2.xml'
532 $config{'ZEBRA_AUTH_CFG'} = $config{'AUTH_INDEX_MODE'} eq 'dom' ? 'zebra-authorities-dom.cfg' : 'zebra-authorities.cfg';
533 $config{'ZEBRA_BIB_CFG'} = $config{'BIB_INDEX_MODE'} eq 'dom' ? 'zebra-biblios-dom.cfg' : 'zebra-biblios.cfg';
534 $config{'AUTH_RETRIEVAL_CFG'} =
535 $config{'AUTH_INDEX_MODE'} eq 'dom' ? 'retrieval-info-auth-dom.xml' : 'retrieval-info-auth-grs1.xml';
536 $config{'BIB_RETRIEVAL_CFG'} =
537 $config{'BIB_INDEX_MODE'} eq 'dom' ? 'retrieval-info-bib-dom.xml' : 'retrieval-info-bib-grs1.xml';
540 if ($config{'INSTALL_MODE'} ne "dev") {
541 push @{ $pl_files->{'rewrite-config.PL'} }, (
542 'blib/PERL_MODULE_DIR/C4/Context.pm',
543 'blib/SCRIPT_NONDEV_DIR/kohalib.pl'
547 $config{ZEBRA_TOKENIZER_STMT} = $config{ZEBRA_TOKENIZER} eq 'icu'
548 ? 'icuchain words-icu.xml'
549 : 'charmap word-phrase-utf.chr';
551 my %test_suite_override_dirs = (
552 KOHA_CONF_DIR => ['etc'],
553 ZEBRA_CONF_DIR => ['etc', 'zebradb'],
554 LOG_DIR => ['var', 'log'],
555 BACKUP_DIR => ['var', 'spool'],
556 SCRIPT_DIR => ['bin'],
557 ZEBRA_LOCK_DIR => ['var', 'lock', 'zebradb'],
558 ZEBRA_DATA_DIR => ['var', 'lib', 'zebradb'],
559 ZEBRA_RUN_DIR => ['var', 'run', 'zebradb'],
564 #VERSION => strftime('2.9.%Y%m%d%H',gmtime),
565 VERSION_FROM => 'kohaversion.pl',
566 ABSTRACT => 'Award-winning integrated library system (ILS) and Web OPAC',
567 AUTHOR => 'Koha Contributors <http://koha-community.org/>',
569 PREREQ_PM => $koha_pm->prereq_pm,
574 # Man pages generated from POD
575 # ExtUtils::MakeMaker already manage $(DESTDIR)
576 INSTALLMAN1DIR => File::Spec->catdir(_strip_destdir($target_directories->{'MAN_DIR'}), 'man1'),
577 INSTALLMAN3DIR => File::Spec->catdir(_strip_destdir($target_directories->{'MAN_DIR'}), 'man3'),
579 PL_FILES => $pl_files,
586 This function recurses through the directory structure and builds
587 a hash of hashes containing the structure with arrays holding filenames.
588 This directory hashing routine was taken from BrowserUK @ http://www.perlmonks.org/?node_id=219919
594 opendir my $dh, $dir or die $!;
595 my $tree = {}->{$dir} = {};
596 while( my $file = readdir($dh) ) {
597 next if $file =~ m/^\.{1,2}/ and $file !~ /^\.htaccess/; # .htaccess is a special case
598 my $path = $dir .'/' . $file;
599 $tree->{$file} = hashdir($path), next if -d $path;
600 push @{$tree->{'.'}}, $file;
607 This function combines the target_map and file hash to
608 map each source file to its destination relative to
609 the set of installation targets.
611 Output will be a hash mapping from each source file
612 to its destination value, like this:
614 'mainpage.pl' => '$(INTRANET_CGI_DIR)/mainpage.pl'
619 my $target_map = shift;
621 my $file_map = shift;
622 my $install_zebra = shift;
623 my $curr_path = @_ ? shift : ['.'];
625 # Traverse the directory tree.
626 # For each file or directory, identify the
627 # most specific match in the target_map
628 foreach my $dir (sort keys %{ $dirtree }) {
630 # deal with files in directory
631 foreach my $file (sort @{ $dirtree->{$dir} }) {
632 my $targetdir = undef;
633 my $matchlevel = undef;
634 # first, see if there is a match on this specific
635 # file in the target map
636 my $filepath = join("/", @$curr_path, $file);
637 if (exists $target_map->{$filepath}) {
638 $targetdir = $target_map->{$filepath};
639 $matchlevel = scalar(@$curr_path) + 1;
641 # no match on the specific file; look for
643 for (my $i = scalar(@$curr_path) - 1; $i >= 0; $i--) {
644 my $dirpath = join("/", @$curr_path[0..$i]);
645 if (exists $target_map->{$dirpath}) {
646 $targetdir = $target_map->{$dirpath};
647 $matchlevel = $i + 1;
652 if (defined $targetdir) {
653 _add_to_file_map($file_map, $targetdir, $curr_path, $file, $matchlevel, $install_zebra);
655 my $path = join("/", @$curr_path);
656 print "failed to map: $path/$file\n" if $DEBUG;
660 # dealing with subdirectory
661 push @$curr_path, $dir;
662 get_file_map($target_map, $dirtree->{$dir}, $file_map, $install_zebra, $curr_path);
668 sub _add_to_file_map {
669 my $file_map = shift;
670 my $targetdir = shift;
671 my $curr_path = shift;
673 my $matchlevel = shift;
674 my $install_zebra = shift;
675 my $dest_path = @_ ? shift : $curr_path;
677 # The target can be one of the following:
678 # 1. scalar representing target symbol
679 # 2. hash ref containing target and trimdir keys
681 # Consequently, this routine traverses this structure,
682 # calling itself recursively, until it deals with
683 # all of the scalar target symbols.
684 if (ref $targetdir eq 'HASH') {
685 my $subtarget = $targetdir->{target};
686 if (exists $targetdir->{trimdir}) {
687 # if we get here, we've specified that
688 # rather than installing the file to
689 # $(TARGET)/matching/dirs/subdirs/file,
690 # we want to install it to
691 # $(TARGET)/subdirs/file
693 # Note that this the only place where
694 # $matchlevel is used.
695 my @new_dest_path = @$dest_path;
696 if ($targetdir->{trimdir} == -1) {
697 splice @new_dest_path, 0, $matchlevel;
699 splice @new_dest_path, 0, $targetdir->{trimdir};
701 _add_to_file_map($file_map, $subtarget, $curr_path, $file, $matchlevel, $install_zebra, \@new_dest_path);
703 # actually getting here means that the
704 # target was unnecessarily listed
705 # as a hash, but we'll forgive that
706 _add_to_file_map($file_map, $subtarget, $curr_path, $file, $matchlevel, $install_zebra);
708 } elsif ($targetdir ne 'NONE' and $targetdir ne '') {
709 my $source = File::Spec->catfile(@$curr_path, $file);
710 my $destination = File::Spec->catfile('blib', $targetdir, @$dest_path, $file);
711 #print "$source => $destination\n"; # DEBUG
712 # quote spaces in file names
713 # FIXME: this is of questionable portability and
714 # probably depends on user's make recognizing this
715 # quoting syntax -- probably better to remove
716 # spaces and shell metacharacters from all file names
717 $source =~ s/ /\\ /g;
718 $destination =~ s/ /\\ /g;
720 $file_map->{$source} = $destination unless (!$install_zebra and $targetdir =~ /ZEBRA/);
724 =head2 get_install_log_values
726 Reads value from the Koha install log specified by
731 sub get_install_log_values {
732 my $install_log = shift;
735 open LOG, "<$install_log" or die "Cannot open install log $install_log: $!\n";
738 next if /^#/ or /^\s*$/;
742 my ($key, $value) = split /=/, $_, 2;
743 $values->{$key} = $value;
747 print <<_EXPLAIN_INSTALL_LOG_;
748 Reading values from install log $install_log. You
749 will be prompted only for settings that have been
750 added since the last time you installed Koha. To
751 be prompted for all settings, run 'perl Makefile.PL'
752 without the --prev-install-log option.
753 _EXPLAIN_INSTALL_LOG_
756 =head2 get_configuration
758 This prompts the user for various configuration options.
762 sub get_configuration {
763 my $defaults = shift;
764 my $valid_values = shift;
765 my $install_log_values = shift;
769 By default, Koha can be installed in one of three ways:
771 standard: Install files in conformance with the Filesystem
772 Hierarchy Standard (FHS). This is the default mode
773 and should be used when installing a production
774 Koha system. On Unix systems, root access is
775 needed to complete a standard installation.
777 single: Install files under a single directory. This option
778 is useful for installing Koha without root access, e.g.,
779 on a web host that allows CGI scripts and MySQL databases
780 but requires the user to keep all files under the user's
783 dev: Create a set of symbolic links and configuration files to
784 allow Koha to run directly from the source distribution.
785 This mode is useful for developers who want to run
786 Koha from a git clone.
789 $msg .= _add_valid_values_disp('INSTALL_MODE', $valid_values);
790 $config{'INSTALL_MODE'} = _get_value('INSTALL_MODE', $msg, $defaults->{'INSTALL_MODE'}, $valid_values, $install_log_values);
792 # set message and default value for INSTALL_BASE
793 # depending on value of INSTALL_MODE
794 my $install_base_default = $defaults->{'INSTALL_BASE'};
795 if ($config{'INSTALL_MODE'} eq 'dev') {
797 Please specify the directory in which to install Koha's
798 active configuration files and (if applicable) the
799 Zebra database. Koha's CGI scripts and templates will
800 be run from the current directory.
802 Configuration directory:);
803 # FIXME - home directory portability consideration apply
804 $install_base_default =
806 || ( exists $ENV{HOME} ? "$ENV{HOME}/koha-dev" : "$defaults->{'INSTALL_BASE'}-dev" )
808 } elsif ($config{'INSTALL_MODE'} eq 'single') {
809 $msg = "\nPlease specify the directory in which to install Koha";
810 # FIXME -- we're assuming under a 'single' mode install
811 # that user will likely want to install under the home
812 # directory. This is OK in and of itself, but we should
813 # use File::HomeDir to locate the home directory portably.
814 # This is deferred for now because File::HomeDir is not yet
816 # --we must also keep this portable to the major OS's -fbcit
817 $install_base_default = (exists $ENV{'HOME'}) ? "$ENV{'HOME'}/koha" : $defaults->{'INSTALL_BASE'};
821 Please specify the directory under which most Koha files
824 Note that if you are planning in installing more than
825 one instance of Koha, you may want to modify the last
826 component of the directory path, which will be used
827 as the package name in the FHS layout.
829 Base installation directory);
831 $config{'INSTALL_BASE'} = _get_value('INSTALL_BASE', $msg, $install_base_default, $valid_values, $install_log_values);
833 $config{'INSTALL_BASE'} = File::Spec->rel2abs($config{'INSTALL_BASE'});
834 print "INSTALL_BASE=$config{'INSTALL_BASE'}\r\n" if $DEBUG;
835 if ($config{'INSTALL_MODE'} eq "standard") {
837 Since you are using the 'standard' install
838 mode, you should run 'make install' as root.
839 However, it is recommended that a non-root
840 user (on Unix and Linux platforms) have
841 ownership of Koha's files, including the
842 Zebra indexes if applicable.
844 Please specify a user account. This
845 user account does not need to exist
846 right now, but it needs to exist
847 before you run 'make install'. Please
848 note that for security reasons, this
849 user should not be the same as the user
850 account Apache runs under.
853 $config{'KOHA_USER'} = _get_value('KOHA_USER', $msg, $defaults->{'KOHA_USER'}, $valid_values, $install_log_values);
856 Please specify the group that should own
857 Koha's files. As above, this group need
858 not exist right now, but should be created
859 before you run 'make install'.
862 $config{'KOHA_GROUP'} = _get_value('KOHA_GROUP', $msg, $defaults->{'KOHA_GROUP'}, $valid_values, $install_log_values);
866 Please specify which database engine you will use
867 to store data in Koha. The choices are MySQL and
868 PostgreSQL; please note that at the moment
869 PostgreSQL support is highly experimental.
872 $msg .= _add_valid_values_disp('DB_TYPE', $valid_values);
873 $config{'DB_TYPE'} = _get_value('DB_TYPE', $msg, $defaults->{'DB_TYPE'}, $valid_values, $install_log_values);
876 Please specify the name or address of your
877 database server. Note that the database
878 does not have to exist at this point, it
879 can be created after running 'make install'
880 and before you try using Koha for the first time.
883 $config{'DB_HOST'} = _get_value('DB_HOST', $msg, $defaults->{'DB_HOST'}, $valid_values, $install_log_values);
886 Please specify the port used to connect to the
888 my $db_port_default = $config{'DB_TYPE'} eq 'mysql' ? '3306' : '5432';
889 $config{'DB_PORT'} = _get_value('DB_PORT', $msg, $db_port_default, $valid_values, $install_log_values);
892 Please specify the name of the database to be
894 $config{'DB_NAME'} = _get_value('DB_NAME', $msg, $defaults->{'DB_NAME'}, $valid_values, $install_log_values);
897 Please specify the user that owns the database to be
899 $config{'DB_USER'} = _get_value('DB_USER', $msg, $defaults->{'DB_USER'}, $valid_values, $install_log_values);
902 Please specify the password of the user that owns the
903 database to be used by Koha);
904 $config{'DB_PASS'} = _get_value('DB_PASS', $msg, $defaults->{'DB_PASS'}, $valid_values, $install_log_values);
907 Koha can use the Zebra search engine for high-performance
908 searching of bibliographic and authority records. If you
909 have installed the Zebra software and would like to use it,
910 please answer 'yes' to the following question. Otherwise,
911 Koha will default to using its internal search engine.
913 Please note that if you choose *NOT* to install Zebra,
914 koha-conf.xml will still contain some references to Zebra
915 settings. Those references will be ignored by Koha.
917 Install the Zebra configuration files?);
918 $msg .= _add_valid_values_disp('INSTALL_ZEBRA', $valid_values);
919 $config{'INSTALL_ZEBRA'} = _get_value('INSTALL_ZEBRA', $msg, $defaults->{'INSTALL_ZEBRA'}, $valid_values, $install_log_values);
921 if ($config{'INSTALL_ZEBRA'} eq 'yes') {
923 if (defined(my $zebra_path = find_zebra())) {
924 $config{'PATH_TO_ZEBRA'} = $zebra_path;
926 Found 'zebrasrv' and 'zebraidx' in $zebra_path.
930 Unable to find the Zebra programs 'zebrasrv' and 'zebraidx'
931 in your PATH or in some of the usual places. If you haven't
932 installed Zebra yet, please do so and run Makefile.PL again.
938 Since you've chosen to use Zebra with Koha,
939 you must specify the primary MARC format of the
940 records to be indexed by Zebra.
942 Koha provides Zebra configuration files for MARC21,
945 MARC format for Zebra indexing);
946 $msg .= _add_valid_values_disp('ZEBRA_MARC_FORMAT', $valid_values);
947 $config{'ZEBRA_MARC_FORMAT'} = _get_value('ZEBRA_MARC_FORMAT', $msg, $defaults->{'ZEBRA_MARC_FORMAT'}, $valid_values, $install_log_values);
949 Koha supplies Zebra configuration files tuned for
950 searching either English (en) or French (fr) MARC
953 Primary language for Zebra indexing);
954 $msg .= _add_valid_values_disp('ZEBRA_LANGUAGE', $valid_values);
955 $config{'ZEBRA_LANGUAGE'} = _get_value('ZEBRA_LANGUAGE', $msg, $defaults->{'ZEBRA_LANGUAGE'}, $valid_values, $install_log_values);
958 Koha can use one of two different indexing modes
959 for the MARC bibliographic records:
961 grs1 - uses the Zebra GRS-1 filter, available
963 dom - uses the DOM XML filter; offers improved
966 Bibliographic indexing mode);
967 $msg .= _add_valid_values_disp('BIB_INDEX_MODE', $valid_values);
968 $config{'BIB_INDEX_MODE'} = _get_value('BIB_INDEX_MODE', $msg, $defaults->{'BIB_INDEX_MODE'}, $valid_values, $install_log_values);
972 Koha can use one of two different indexing modes
973 for the MARC authorities records:
975 grs1 - uses the Zebra GRS-1 filter, available
977 dom - uses the DOM XML filter; offers improved
980 Authorities indexing mode);
981 $msg .= _add_valid_values_disp('AUTH_INDEX_MODE', $valid_values);
982 $config{'AUTH_INDEX_MODE'} = _get_value('AUTH_INDEX_MODE', $msg, $defaults->{'AUTH_INDEX_MODE'}, $valid_values, $install_log_values);
985 Zebra has two methods to perform records tokenization
986 and characters normalization: CHR and ICU. ICU is
987 recommended for catalogs containing non-Latin
990 $msg .= _add_valid_values_disp('ZEBRA_TOKENIZER', $valid_values);
991 $config{'ZEBRA_TOKENIZER'} = _get_value('ZEBRA_TOKENIZER', $msg, $defaults->{'ZEBRA_TOKENIZER'}, $valid_values, $install_log_values);
994 Please specify Zebra database user);
995 $config{'ZEBRA_USER'} = _get_value('ZEBRA_USER', $msg, $defaults->{'ZEBRA_USER'}, $valid_values, $install_log_values);
998 Please specify the Zebra database password);
999 $config{'ZEBRA_PASS'} = _get_value('ZEBRA_PASS', $msg, $defaults->{'ZEBRA_PASS'}, $valid_values, $install_log_values);
1002 Since you've chosen to use Zebra, you can enable the SRU/
1003 Z39.50 Server if you so choose, but you must specify a
1004 few configuration options for it.
1006 Please note that if you choose *NOT* to configure SRU,
1007 koha-conf.xml will still contain some references to SRU
1008 settings. Those references will be ignored by Koha.
1010 Install the SRU configuration files?);
1011 $msg .= _add_valid_values_disp('INSTALL_SRU', $valid_values);
1012 $config{'INSTALL_SRU'} = _get_value('INSTALL_SRU', $msg, $defaults->{'INSTALL_SRU'}, $valid_values, $install_log_values);
1014 if ($config{'INSTALL_SRU'} eq 'yes') {
1016 Since you've chosen to configure SRU, you must
1017 specify the host and port(s) that the SRU
1018 Servers (bibliographic and authority) should run on.
1021 SRU Database host?);
1022 $config{'ZEBRA_SRU_HOST'} = _get_value('ZEBRA_SRU_HOST', $msg, $defaults->{'ZEBRA_SRU_HOST'}, $valid_values, $install_log_values);
1025 SRU port for bibliographic data?);
1026 $config{'ZEBRA_SRU_BIBLIOS_PORT'} = _get_value('ZEBRA_SRU_BIBLIOS_PORT', $msg, $defaults->{'ZEBRA_SRU_BIBLIOS_PORT'}, $valid_values, $install_log_values);
1029 SRU port for authority data?);
1030 $config{'ZEBRA_SRU_AUTHORITIES_PORT'} = _get_value('ZEBRA_SRU_AUTHORITIES_PORT', $msg, $defaults->{'ZEBRA_SRU_AUTHORITIES_PORT'}, $valid_values, $install_log_values);
1035 Since you've chosen to use Zebra, you can also choose to
1036 install PazPar2, which is a metasearch tool. With PazPar2,
1037 Koha can perform on-the-fly merging of bibliographic
1038 records during searching, allowing for FRBRization of
1041 Install the PazPar2 configuration files?);
1042 $msg .= _add_valid_values_disp('INSTALL_PAZPAR2', $valid_values);
1043 $config{'INSTALL_PAZPAR2'} = _get_value('INSTALL_PAZPAR2', $msg, $defaults->{'INSTALL_PAZPAR2'}, $valid_values, $install_log_values);
1045 if ($config{'INSTALL_PAZPAR2'} eq 'yes') {
1047 Since you've chosen to configure PazPar2, you must
1048 specify the host and port(s) that PazPar2
1052 Zebra bibliographic server host?);
1053 $config{'MERGE_SERVER_HOST'} = _get_value('MERGE_SERVER_HOST', $msg, $defaults->{'MERGE_SERVER_HOST'}, $valid_values, $install_log_values);
1056 Zebra bibliographic port for PazPar2 to use?);
1057 $config{'MERGE_SERVER_PORT'} = _get_value('MERGE_SERVER_PORT', $msg, $defaults->{'MERGE_SERVER_PORT'}, $valid_values, $install_log_values);
1061 $config{'PAZPAR2_HOST'} = _get_value('PAZPAR2_HOST', $msg, $defaults->{'PAZPAR2_HOST'}, $valid_values, $install_log_values);
1065 $config{'PAZPAR2_PORT'} = _get_value('PAZPAR2_PORT', $msg, $defaults->{'PAZPAR2_PORT'}, $valid_values, $install_log_values);
1070 Use memcached and memoize to cache the results of some function calls?
1071 This provides a signficant performance improvement.
1072 You will need a Memcached server running.);
1073 $msg .= _add_valid_values_disp('USE_MEMCACHED', $valid_values);
1074 $config{'USE_MEMCACHED'} = _get_value('USE_MEMCACHED', $msg, $defaults->{'USE_MEMCACHED'}, $valid_values, $install_log_values);
1075 if ($config{'USE_MEMCACHED'} eq 'yes'){
1077 Since you've chosen to use caching, you must specify the memcached servers and the namespace to use:
1080 Memcached server address?);
1081 $config{'MEMCACHED_SERVERS'} = _get_value('MEMCACHED_SERVERS', $msg, $defaults->{'MEMCACHED_SERVERS'}, $valid_values, $install_log_values);
1084 Memcached namespace?);
1085 $config{'MEMCACHED_NAMESPACE'} = _get_value('MEMCACHED_NAMESPACE', $msg, $defaults->{'MEMCACHED_NAMESPACE'}, $valid_values, $install_log_values);
1091 Would you like to run the database-dependent test suite?);
1092 $msg .= _add_valid_values_disp( 'RUN_DATABASE_TESTS', $valid_values );
1093 $config{'RUN_DATABASE_TESTS'} = _get_value( 'RUN_DATABASE_TESTS', $msg, $defaults->{'RUN_DATABASE_TESTS'}, $valid_values, $install_log_values );
1095 if ( $config{'RUN_DATABASE_TESTS'} eq 'yes' ) {
1096 $config{'TEST_DB_TYPE'} = $config{'DB_TYPE'};
1097 $config{'TEST_DB_HOST'} = $config{'DB_HOST'};
1098 $msg = q(TEST DATABASE
1100 THE DATA IN THIS DATABASE WILL BE DESTROYED during the process of
1101 testing. Please don't do this on your production database. It is not
1104 YOU WILL SUFFER DATA LOSS if you run this test suite on your test
1105 database. You are better off not running this optional test suite than
1106 doing it in a database that you don't want to lose.
1108 Please specify the name of the test database to be
1111 $config{'TEST_DB_NAME'} = _get_value('TEST_DB_NAME', $msg, $defaults->{'TEST_DB_NAME'}, $valid_values, $install_log_values);
1112 while ( $config{'TEST_DB_NAME'} eq $config{'DB_NAME'} ) {
1113 $msg = q(Please do not use the same database for testing as you do for production. You run the severe risk of data loss.);
1114 $config{'TEST_DB_NAME'} = _get_value('TEST_DB_NAME', $msg, $defaults->{'TEST_DB_NAME'}, $valid_values, $install_log_values);
1118 Please specify the user that owns the database to be
1120 $config{'TEST_DB_USER'} = _get_value('TEST_DB_USER', $msg, $defaults->{'TEST_DB_USER'}, $valid_values, $install_log_values);
1123 Please specify the password of the user that owns the
1124 database to be used by Koha);
1125 $config{'TEST_DB_PASS'} = _get_value('TEST_DB_PASS', $msg, $defaults->{'TEST_DB_PASS'}, $valid_values, $install_log_values);
1130 # add version number
1131 my $version = "no_version_found";
1133 require 'kohaversion.pl';
1134 $version = kohaversion();
1136 $config{'KOHA_INSTALLED_VERSION'} = $version;
1141 sub _add_valid_values_disp {
1143 my $valid_values = shift;
1146 if (exists $valid_values->{$key}) {
1147 $disp = " (" . join(", ", sort keys %{ $valid_values->{$key} }) . ")";
1155 my $default = shift;
1156 my $valid_values = shift;
1157 my $install_log_values = shift;
1159 # take value from install log if present
1160 if (exists $install_log_values{$key}) {
1161 $install_log_values{$key} =~ s/\$/\$\$/g;
1162 return $install_log_values{$key};
1165 # override default value from environment
1166 if (exists $ENV{$key}) {
1167 $default = $ENV{$key};
1168 $msg .= " (default from environment)";
1171 my $val = prompt($msg, $default);
1173 while (exists $valid_values->{$key} and
1174 $val ne $default and
1175 not exists $valid_values->{$key}->{$val}) {
1176 my $retry_msg = "Value '$val' is not a valid option.\n";
1177 $retry_msg .= "Please enter a value";
1178 $retry_msg .= _add_valid_values_disp($key, $valid_values);
1179 $val = prompt($retry_msg, $default);
1181 $val =~ s/\$/\$\$/g;
1185 =head2 get_target_directories
1187 Creates a hash mapping from symbols for installation target
1188 directories to actual directory paths.
1190 Also returns a hash indicating targets for which
1191 files need not be copied -- this is used for the 'dev'
1192 mode installation, where some files are installed in place.
1196 sub get_target_directories {
1199 my $base = $config->{'INSTALL_BASE'};
1200 my $mode = $config->{'INSTALL_MODE'};
1202 # get last component of install base directory
1203 # to treat as package name
1204 my ($volume, $directories, $file) = File::Spec->splitpath($base, 1);
1206 my @basedir = File::Spec->splitdir($directories);
1208 # for Win32 we need to prepend the volume to the directory path
1209 if ( $^O eq 'MSWin32' ) { shift @basedir; unshift @basedir, $volume; }
1210 elsif ( $^O eq 'cygwin' ) { shift @basedir; unshift @basedir, 'c:'; } # in a cygwin environment, $volume is returned empty
1212 my $package = pop @basedir;
1217 if ($mode eq 'single') {
1218 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'cgi-bin');
1219 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs', 'intranet-tmpl');
1220 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs');
1221 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'cgi-bin');
1222 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs', 'opac-tmpl');
1223 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs');
1224 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir(@basedir, $package, 'lib');
1225 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc');
1226 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'zebradb');
1227 $dirmap{'PAZPAR2_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'pazpar2');
1228 $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
1229 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
1230 $dirmap{'SCRIPT_NONDEV_DIR'} = $dirmap{'SCRIPT_DIR'};
1231 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
1232 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
1233 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lock', 'zebradb');
1234 $dirmap{'LOG_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'log');
1235 $dirmap{'BACKUP_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'spool');
1236 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lib', 'zebradb');
1237 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'run', 'zebradb');
1238 } elsif ($mode eq 'dev') {
1239 my $curdir = File::Spec->rel2abs(File::Spec->curdir());
1240 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir($curdir);
1241 $skipdirs{'INTRANET_CGI_DIR'} = 1;
1242 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'intranet-tmpl');
1243 $skipdirs{'INTRANET_TMPL_DIR'} = 1;
1244 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl');
1245 $skipdirs{'INTRANET_WWW_DIR'} = 1;
1246 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir($curdir);
1247 $skipdirs{'OPAC_CGI_DIR'} = 1;
1248 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'opac-tmpl');
1249 $skipdirs{'OPAC_TMPL_DIR'} = 1;
1250 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl');
1251 $skipdirs{'OPAC_WWW_DIR'} = 1;
1252 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir($curdir);
1253 $skipdirs{'PERL_MODULE_DIR'} = 1;
1254 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc');
1255 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'zebradb');
1256 $dirmap{'PAZPAR2_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'pazpar2');
1257 $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
1258 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
1259 $dirmap{'SCRIPT_NONDEV_DIR'} = $dirmap{'SCRIPT_DIR'};
1260 $skipdirs{'SCRIPT_NONDEV_DIR'} = 1;
1261 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
1262 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
1263 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lock', 'zebradb');
1264 $dirmap{'LOG_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'log');
1265 $dirmap{'BACKUP_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'spool');
1266 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lib', 'zebradb');
1267 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'run', 'zebradb');
1269 # mode is standard, i.e., 'fhs'
1270 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'cgi-bin');
1271 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs', 'intranet-tmpl');
1272 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs');
1273 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'cgi-bin');
1274 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs', 'opac-tmpl');
1275 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs');
1276 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir(@basedir, $package, 'lib');
1277 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package);
1278 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package, 'zebradb');
1279 $dirmap{'PAZPAR2_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package, 'pazpar2');
1280 $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
1281 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
1282 $dirmap{'SCRIPT_NONDEV_DIR'} = $dirmap{'SCRIPT_DIR'};
1283 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
1284 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
1285 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'lock', $package, 'zebradb');
1286 $dirmap{'LOG_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'log', $package);
1287 $dirmap{'BACKUP_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'spool', $package);
1288 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'lib', $package, 'zebradb');
1289 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'run', $package, 'zebradb');
1292 _get_env_overrides(\%dirmap);
1293 _get_argv_overrides(\%dirmap);
1294 _add_destdir(\%dirmap) unless ($^O eq 'MSWin32');
1296 return \%dirmap, \%skipdirs;
1301 Map a directory target to the corresponding path for
1309 my @basedir = (File::Spec->rel2abs(File::Spec->curdir()), 't', 'run');
1310 if (exists $test_suite_override_dirs{$dirname}) {
1311 return File::Spec->catdir(@basedir, @{ $test_suite_override_dirs{$dirname} });
1318 sub _get_env_overrides {
1321 foreach my $key (keys %$dirmap) {
1322 if (exists $ENV{$key}) {
1323 $dirmap->{$key} = $ENV{$key};
1324 print "Setting $key from environment\n";
1329 sub _get_argv_overrides {
1333 for (my $i = 0; $i <= $#ARGV; $i++) {
1334 if ($ARGV[$i] =~ /^([^=]+)=([^=]+)$/ and exists $dirmap->{$1}) {
1337 push @new_argv, $ARGV[$i];
1343 sub _strip_destdir {
1345 $dir =~ s/^\$\(DESTDIR\)//;
1352 foreach my $key (keys %$dirmap) {
1353 $dirmap->{$key} = '$(DESTDIR)'.$dirmap->{$key};
1357 sub display_configuration {
1360 my @version = grep /\/usr\/share\/perl\//, @INC;
1361 push @version, ('/usr/share/perl/5.10') if !$version[0];
1362 print "\n\nKoha will be installed with the following configuration parameters:\n\n";
1363 foreach my $key (sort keys %$config) {
1364 print sprintf("%-25.25s%s\n", $key, $config->{$key});
1367 print "\nand in the following directories:\n\n";
1368 foreach my $key (sort keys %$dirmap) {
1369 print sprintf("%-25.25s%s\n", $key, $dirmap->{$key});
1371 print "\n\nTo change any configuration setting, please run\n";
1372 print "perl Makefile.PL again. To override one of the target\n";
1373 print "directories, you can do so on the command line like this:\n";
1374 print "\nperl Makefile.PL PERL_MODULE_DIR=$version[0]\n\n";
1375 print "You can also set different default values for parameters\n";
1376 print "or override directory locations by using environment variables.\n";
1377 print "\nFor example:\n\n";
1378 print "export DB_USER=my_koha\n";
1379 print "perl Makefile.PL\n";
1381 print "DB_USER=my_koha DOC_DIR=/usr/local/info perl Makefile.PL\n\n";
1382 print "If installing on a Win32 platform, be sure to use:\n";
1383 print "'dmake -x MAXLINELENGTH=300000'\n\n";
1388 Attempt to find Zebra - check user's PATH and
1389 a few other directories for zebrasrv and zebraidx.
1391 FIXME: doesn't handle Win32
1396 my @search_dirs = map {
1397 my $abs = File::Spec->rel2abs($_);
1398 my ($toss, $directories);
1399 ($toss, $directories, $toss) = File::Spec->splitpath($abs, 1);
1401 } split /:/, $ENV{PATH};
1402 push @search_dirs, qw(/usr/local/bin /opt/local/bin /usr/bin);
1403 my @zebrasrv_dirs = grep { -x File::Spec->catpath('', $_, 'zebrasrv') } @search_dirs;
1404 return unless @zebrasrv_dirs;
1405 # verify that directory that contains zebrasrv also contains zebraidx
1406 foreach my $dir (@zebrasrv_dirs) {
1407 return $dir if -x File::Spec->catpath('', $dir, 'zebraidx');
1414 # This will have to be reworked in order to accommodate Win32...
1418 my $test = $self->SUPER::test(@_);
1419 $test =~ s!\$\(INST_LIB\)!blib/PERL_MODULE_DIR!g;
1422 $test =~ s!\$\(FULLPERLRUN\)!KOHA_CONF=blib/KOHA_CONF_DIR/koha-conf.xml \$(FULLPERLRUN)!g;
1429 # NOTE: we're *not* doing this: my $install = $self->SUPER::install(@_);
1430 # This means that we're completely overriding EU::MM's default
1431 # installation and uninstallation targets.
1433 # If installation is on Win32, we need to do permissions different from *nix
1434 if ( $^O =~ /darwin|linux|cygwin|freebsd|solaris/ ) { # this value needs to be verified for each platform and modified accordingly
1435 foreach my $key (sort keys %$target_directories) {
1437 KOHA_INST_$key = blib/$key
1438 KOHA_DEST_$key = $target_directories->{$key}
1439 ) unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1442 install :: all install_koha set_koha_ownership set_koha_permissions warn_koha_env_vars
1443 \t\$(NOECHO) \$(NOOP)
1445 $install .= "install_koha ::\n";
1446 $install .= "\t\$(NOECHO) umask 022; \$(MOD_INSTALL) \\\n";
1447 foreach my $key (sort keys %$target_directories) {
1448 $install .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n"
1449 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1451 $install .= "\t\t\$(INST_MAN1DIR) \$(DESTINSTALLMAN1DIR) \\\n";
1452 $install .= "\t\t\$(INST_MAN3DIR) \$(DESTINSTALLMAN3DIR)\n";
1455 $install .= "set_koha_ownership ::\n";
1456 # Do not try to change ownership if DESTDIR is set
1457 if ($config{'INSTALL_MODE'} eq 'standard' and $config{'KOHA_USER'} ne "root") {
1458 foreach my $key (sort keys %$target_directories) {
1459 $install .= "\t\$(NOECHO) if test -z \"\$(DESTDIR)\"; then chown -R $config{'KOHA_USER'}:$config{'KOHA_GROUP'} \$(KOHA_DEST_$key); fi\n"
1460 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1463 $install .= "\t\t\$(NOECHO) \$(NOOP)\n\n";
1467 $install .= "set_koha_permissions ::\n";
1468 # This is necessary because EU::MM installs files
1469 # as either 0444 or 0555, and we want the owner
1470 # of Koha's files to have write permission by default.
1471 foreach my $key (sort keys %$target_directories) {
1472 $install .= "\t\$(NOECHO) chmod -R u+w \$(KOHA_DEST_$key)\n"
1473 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1476 elsif ($^O eq 'MSWin32' ) { # On Win32, the install probably needs to be done under the user account koha will be running as...
1477 # We can attempt some creative things with command line utils such as CACLS which allows permission
1478 # management from Win32 cmd.exe, but permissions really only apply to NTFS.
1479 foreach my $key (sort keys %$target_directories) {
1481 KOHA_INST_$key = blib/$key
1482 KOHA_DEST_$key = $target_directories->{$key}
1483 ) unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1486 install :: all install_koha warn_koha_env_vars
1487 \t\$(NOECHO) \$(NOOP)
1489 $install .= "install_koha ::\n";
1490 $install .= "\t\$(MOD_INSTALL) \\\n";
1491 foreach my $key (sort keys %$target_directories) {
1492 $install .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n"
1493 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1498 $install .= "warn_koha_env_vars ::\n";
1499 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1500 $install .= "\t\$(NOECHO) \$(ECHO) Koha\\'s files have now been installed. \n";
1501 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1502 $install .= "\t\$(NOECHO) \$(ECHO) In order to use Koha\\'s command-line batch jobs,\n";
1503 $install .= "\t\$(NOECHO) \$(ECHO) you should set the following environment variables:\n";
1504 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1505 $install .= "\t\$(NOECHO) \$(ECHO) export KOHA_CONF=\$(KOHA_DEST_KOHA_CONF_DIR)/koha-conf.xml\n";
1506 $install .= "\t\$(NOECHO) \$(ECHO) export PERL5LIB=$target_directories->{'PERL_MODULE_DIR'}\n";
1507 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1508 $install .= "\t\$(NOECHO) \$(ECHO) For other post-installation tasks, please consult the README.\n";
1509 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1511 if ($config{'INSTALL_ZEBRA'} eq "yes") {
1512 $install .= _update_zebra_conf_target();
1515 $install .= upgrade();
1520 =head2 _update_zebra_conf_target
1522 Add an installation target for updating
1523 Zebra's configuration files.
1527 sub _update_zebra_conf_target {
1529 my $target = "\nupdate_zebra_conf ::\n";
1530 $target .= "\tumask 022; \$(MOD_INSTALL) \\\n";
1531 $target .= "\t\t\$(KOHA_INST_ZEBRA_CONF_DIR) \$(KOHA_DEST_ZEBRA_CONF_DIR) \n";
1532 $target .= "\t\$(NOECHO) chmod -R u+w \$(KOHA_DEST_ZEBRA_CONF_DIR)\n" unless $^O eq "MSWin32";
1533 $target .= "\tumask 022; \$(MOD_INSTALL) \\\n";
1534 $target .= "\t\t\$(KOHA_INST_PAZPAR2_CONF_DIR) \$(KOHA_DEST_PAZPAR2_CONF_DIR) \n";
1535 $target .= "\t\$(NOECHO) chmod -R u+w \$(KOHA_DEST_PAZPAR2_CONF_DIR)\n" unless $^O eq "MSWin32";
1544 if (exists $install_log_values{'KOHA_INSTALLED_VERSION'}) {
1545 my $version = $install_log_values{'KOHA_INSTALLED_VERSION'};
1546 $version =~ s/\./_/g;
1547 $backup_suffix = "_koha_$version";
1549 $backup_suffix = "_upgrade_backup";
1553 MOD_BACKUP = \$(ABSPERLRUN) -Minstall_misc::UpgradeBackup -e 'backup_changed_files({\@ARGV}, '$backup_suffix', '\''\$(VERBINST)'\'', '\''\$(UNINST)'\'');' --
1555 upgrade :: make_upgrade_backup install
1556 \t\$(NOECHO) \$(NOOP)
1557 make_upgrade_backup ::
1558 \t\$(NOECHO) umask 022; \$(MOD_BACKUP) \\
1560 foreach my $key (qw/KOHA_CONF_DIR INTRANET_TMPL_DIR INTRANET_WWW_DIR OPAC_TMPL_DIR OPAC_WWW_DIR
1561 PAZPAR2_CONF_DIR ZEBRA_CONF_DIR/) {
1562 $upgrade .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n"
1563 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or
1564 exists $skip_directories->{$key} or
1565 not exists $target_directories->{$key};
1567 $upgrade =~ s/\\\n$/\n/;
1573 # put directory mappings into Makefile
1574 # so that Make will export as environment
1575 # variables -- this is for the use of
1579 # Hereagain, we must alter syntax per platform...
1580 if ( $^O eq 'MSWin32' ) {
1581 # NOTE: it is imperative that there be no whitespaces in ENV=value...
1582 $env = join("\n", map { "__${_}__=$target_directories->{$_}" } keys %$target_directories);
1584 $env .= join("\n", map { "__${_}__=$config{$_}" } keys %config);
1587 $env = join("\n", map { "export __${_}__ := $target_directories->{$_}" } keys %$target_directories);
1589 $env .= join("\n", map { "export __${_}__ := $config{$_}" } keys %config);
1592 if ( $config{'RUN_DATABASE_TESTS'} eq 'yes' ) {
1593 if ( open( my $confhandle, '>', 't/test-config.txt' ) ) {
1594 print $confhandle "# This configuration file lets the t/Makefile prepare a test koha-conf.xml file.\n";
1595 print $confhandle "# It is generated by the top-level Makefile.PL.\n";
1596 print $confhandle "# It is separate from the standard koha-conf.xml so that you can edit this by hand and test with different configurations.\n";
1598 # these directories will be relocated to the 't' directory
1599 foreach my $dirname ( keys %$target_directories ) {
1600 my $dir = main::_strip_destdir( $target_directories->{$dirname} );
1601 if ( exists $test_suite_override_dirs{$dirname} ) {
1602 $dir = main::get_test_dir($dirname);
1604 print $confhandle "$dirname = $dir\n"
1606 print $confhandle "\n";
1608 print $confhandle join( "\n", map { "$_ = $config{$_}" } keys( %config ) ), "\n";
1609 close( $confhandle );
1611 warn 'unable to open conf file for database dependent tests: $!';
1624 ExtUtils::MakeMaker(3)
1628 MJ Ray mjr at phonecoop.coop
1629 Galen Charlton galen.charlton at liblime.com
1633 FIXME: deal with .htaccess