Martin Renvoize [Tue, 31 Mar 2020 08:43:34 +0000 (09:43 +0100)]
Bug 24474: (QA follow-up) Fix failing test
The test was assuming default data and would fail if you ran through the
test plan (and disabled all but `onpayment` for the
'MarkLostItemsAsReturned' preference) on the data before running the
included unit tests.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 14 Feb 2020 10:39:21 +0000 (10:39 +0000)]
Bug 24474: (follow-up) Add LOST_FOUND logic to Koha::Account::pay
This patch adds the same updated logic as found in
Koha::Account::Line->apply to handle LOST_FOUND credits being applied
against their associated LOST debit.
Currently a 'LOST_FOUND' credit is never created via the pay method and
so the additional test will always pass, but the addition here accounts
for possible future uses.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Mon, 10 Feb 2020 10:31:37 +0000 (10:31 +0000)]
Bug 24474: (follow-up) Add onpayment to sysprefs file
This patch adds the required line to the circulation.pref file to
dispaly the onpayment option in the MarkLostItemReturned preference
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Wed, 5 Feb 2020 13:10:49 +0000 (13:10 +0000)]
Bug 24474: Filter out LOST_FOUND
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Wed, 5 Feb 2020 10:14:05 +0000 (10:14 +0000)]
Bug 24474: Add `onpayment` option to `MarkLostItemsReturned`
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 4 Feb 2020 14:13:47 +0000 (15:13 +0100)]
Bug 24474: Add tests
This does the following using the interface:
- Unselect all the options from MarkLostItemsAsReturned except for
'onpayment'
- Check an item out
- Create a manual invoice LOST for the checked in item
- Renew the item
- Check that the item was not returned
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Aleisha Amohia [Thu, 19 Mar 2020 04:37:34 +0000 (04:37 +0000)]
Bug 24900: Checks in MARC mod templates for when from field does not equal conditional field
When MARC modification template actions are applied, they assume that
the from field is the same as the conditional field. This patch adds
checks for this, as well as tests to confirm the behaviour is correct.
CASE 1: Delete 1st field 020 if 651$z exists
BROKEN BEHAVIOUR (before patch): deletes the 2nd instance of 020 instead
of 1st
EXPECTED BEHAVIOUR (corrected by patch): deletes the 1st instance of 020
CASE 2: Delete 1st field 020 if 651$z matches Berlin. (must include '.')
BROKEN BEHAVIOUR (before patch): deletes the 2nd instance of 020
EXPECTED BEHAVIOUR (corrected by patch): deletes the 1st instance of 020
CASE 3: Delete field 020 if 650$2 does not match fast
BROKEN BEHAVIOUR (before patch): deletes all 020 fields even though
650$2 does match fast
EXPECTED BEHAVIOUR (corrected by patch): does not delete 020 fields
Confirm tests pass: t/db_dependent/MarcModificationTemplates.t
Sponsored-by: Catalyst IT
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 31 Mar 2020 15:56:41 +0000 (17:56 +0200)]
Bug 22001: Errors are no longer logged by default (!)
This is one of the biggest part we will have to deal with when we will
switch to DBIC handler for UI as well.
The DBI errors will not be logged if we do not deal with them correctly.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 31 Mar 2020 15:55:28 +0000 (17:55 +0200)]
Bug 22001: execute reports in an eval
Otherwise the tests will fail. We will certainly log twice the error
when run from the UI, but not a big deal. This definitely needs more
attention in a follow-up bug report.
We want to raise proper exceptions here.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 31 Mar 2020 15:54:36 +0000 (17:54 +0200)]
Bug 22001: Fix Koha/Patrons.t
The message is only printed once
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 31 Mar 2020 15:53:47 +0000 (17:53 +0200)]
Bug 22001: Make the DBD error regex less strict
Now the message is looking like
DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Duplicate entry
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 31 Mar 2020 15:27:12 +0000 (17:27 +0200)]
Bug 22001: Add the DBI error message
Using DBIx::Class error handler, we should not hide the error when
encapsulating it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 31 Mar 2020 13:58:21 +0000 (15:58 +0200)]
Bug 22001: Set unsafe only if RaiseError is not set
Sooooo....
That was tricky, and the solution looks trivial.
However it's not.
We have unsafe set for "historical reason".
Having it on when RaiseError is on have the effect of overwritting the
DBIC error handler.
The problem is:
t/db_dependent/Circulation/MarkIssueReturned.t (and other tests) is failing with:
# expecting: Koha::Exceptions::Object::BadValue
# found: DBIx::Class::Exception ({UNKNOWN}: Can't locate object method "rethrow" via package "DBD::mysql::st execute failed: Incorrect datetime value: 'bad_date' for column 'returndate' at row 1 [for Statement "UPDATE `issues` SET `returndate` = ? WHERE ( `issue_id` = ? )" with ParamValues: 0='bad_date', 1=238] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line
In Koha::Object->store, the exception is not a DBIx::Class::Exception object (as we except), but
a string (on which we cannot call rethrow).
Swithing unsafe off restores the expected behavior.
To make sure the UI will not be affected, it is only turned off when
RaiseError is set.
The situation is still wrong (for UI), from the POD https://metacpan.org/pod/DBIx::Class::Storage::DBI (/unsafe)
"""
Note that your custom settings can cause Storage to malfunction, especially if you set a HandleError handler that suppresses exceptions and/or disable RaiseError.
"""
And also https://metacpan.org/release/DBIx-Class/source/lib/DBIx/Class/Storage/DBI.pm#L1531
Many thanks Tomas for the digging exploration!
We need to turn RaiseError and remove the unsafe flag, for UI as well,
but that should be done at the beginning of a dev cycle.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Mon, 23 Mar 2020 16:21:24 +0000 (17:21 +0100)]
Bug 23463: (follow-up 3) Fix timestamp default value
This is the only situation I found where:
* t/db_dependent/Koha/Item.t is passing
* t/db_dependent/Koha/Object.t is passing
* MySQL 8 is happy (and not fail with "Column 'timestamp' cannot be null"), which is certainly what I missed in the previous follow-up
About the change to Object.t: the next store was called without the
generated timestamp, so it is needed to call discard_changes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Mon, 30 Mar 2020 09:04:51 +0000 (11:04 +0200)]
Bug 22001: Fix Object.t - handle correct RaiseError and PrintError
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Mon, 30 Mar 2020 08:16:23 +0000 (10:16 +0200)]
Bug 25018: Use new KOHA_TESTING envvar to detect environment testing
In some tests we want to know if we are in a testing environment.
When run the usual way, our trick works, the perl interpreter matches 'prove':
$ENV{_} eq 'prove'
In other situations, we have the KOHA_NO_TABLE_LOCKS environment variables, for the SendCirculationAlert race conditions (see bug 15854 and bug 18364).
For unknown reasons, Jenkins runs the tests with /usr/bin/perl.
This patch suggests to rename KOHA_NO_TABLE_LOCKS and use KOHA_TESTING
instead, when prove is not used (or not correctly detected as it it the
case for Jenkins)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 27 Mar 2020 16:09:27 +0000 (17:09 +0100)]
Bug 24614: Fix Reports/Guided.t
DBD::mysql::st execute failed: Column 'public' cannot be null [for Statement "UPDATE `saved_sql` SET `last_modified` = ?, `notes` = ?, `public` = ?, `report_group` = ?, `report_name` = ?, `report_subgroup` = ?,
`savedsql` = ? WHERE ( `id` = ? )" with ParamValues: 0='2020-03-27T16:03:04', 1=undef, 2=undef, 3=undef, 4='Just another report', 5=undef, 6=undef, 7=25] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1836.
# Looks like you planned 17 tests but ran 6.
update_sql expect all the paramters to be set, otherwise it will be
nulled.
The best way to fix it is at test level. There is only 1 occurrence in
controller/module, and it sends all the parameters. That is the correct
way to do and will make things easier when we will removed them to use
Koha::Reports directly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 27 Mar 2020 15:46:30 +0000 (16:46 +0100)]
Bug 18177: (follow-up) remove aqbooksellers.currency
There was an occurrence in tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 27 Mar 2020 15:36:08 +0000 (16:36 +0100)]
Bug 23204: Fix tests swapping fields (they are not ordered)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nazlı Çetin [Fri, 27 Mar 2020 12:25:46 +0000 (12:25 +0000)]
Bug 25000: SQL report not updated
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 27 Mar 2020 12:32:14 +0000 (12:32 +0000)]
Bug 23204: DBRev 19.12.00.060
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Marcel de Rooy [Fri, 27 Mar 2020 09:43:55 +0000 (09:43 +0000)]
Bug 23473: (QA follow-up) Fix number of tests
=> Looks like you planned 158 tests but ran 159.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 4 Feb 2020 12:14:51 +0000 (12:14 +0000)]
Bug 23473: (follow-up) Fix QA complaints (tabs, filters, Dumper)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Wed, 8 Jan 2020 15:02:08 +0000 (15:02 +0000)]
Bug 23473: Don't allow staff password changes for imports
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Wed, 8 Jan 2020 14:24:04 +0000 (14:24 +0000)]
Bug 23473: Don't allow setting blank passwords via import
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 5 Nov 2019 12:58:45 +0000 (12:58 +0000)]
Bug 23473: (follow-up) Catch and show password exceptions
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Tue, 29 Oct 2019 10:24:42 +0000 (10:24 +0000)]
Bug 23473: (follow-up) check if overwrite_passwords is set
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick [Thu, 3 Oct 2019 13:08:53 +0000 (13:08 +0000)]
Bug 23473: (follow-up) Make passwords 'secure' for tests
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Mon, 19 Aug 2019 16:16:30 +0000 (16:16 +0000)]
Bug 23473: Allow overwrite of passwords during import
To test:
1 - Have some patrons in your system
2 - Export some of their info via reports
SELECT cardnumber, userid, surname, firstname, password, branchcode, categorycode
3 - Edit the file from above, changing all the password lines
4 - Import the file with overwrite
5 - Confirm passwords have not changed (run the report again and confirm the hashes are the same)
6 - Apply patch
7 - Restart all the things
8 - Check the new box on import screen to overwrite passwrods
9 - Import file again
10 - Confirm passwords have changed
11 - Signin using new password to verify the hash is the password as supplied
12 - Repeat via commandline import supplying --overwrite_passwords option
13 - Verify works as expected
14 - Prove -v t/db_dependent/Koha/Patrons/Import.t
Sponsored-by: ByWater Solutions
Signed-off-by: Ron Marion <ron.marion@goddard.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 27 Mar 2020 12:19:26 +0000 (12:19 +0000)]
Bug 18177: DBRev 19.12.00.059
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 24 Mar 2020 15:22:33 +0000 (16:22 +0100)]
Bug 18177: Do not remove columns if at least one value exists
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 17 Mar 2020 08:55:39 +0000 (09:55 +0100)]
Bug 18177: DBIC changes
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 17 Mar 2020 08:50:18 +0000 (09:50 +0100)]
Bug 18177: DB changes
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 17 Mar 2020 08:53:04 +0000 (09:53 +0100)]
Bug 18177: remove aqbooksellers.currency
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 17 Mar 2020 08:47:46 +0000 (09:47 +0100)]
Bug 18177: remove aqbooksellers.bookselleremail
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 17 Mar 2020 08:43:13 +0000 (09:43 +0100)]
Bug 18177: remove aqbooksellers.booksellerurl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 17 Mar 2020 08:42:37 +0000 (09:42 +0100)]
Bug 18177: remove aqbooksellers.booksellerfax
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 17 Mar 2020 08:40:04 +0000 (09:40 +0100)]
Bug 18177: remove aqbooksellers.othersupplier
This patchset removes some columns from the aqbooksellers table that are
not used:
* booksellerfax
* booksellerurl
* bookselleremail
* othersupplier
* currency
The first 3 ones are certainly leftover from bug 10402.
Test plan:
For each for these fields you will make sure that they cannot be edited
from the interface.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Fri, 14 Feb 2020 15:07:16 +0000 (15:07 +0000)]
Bug 23888: (follow-up) Wrap English string in translation function
This patch makes alert added in subscription-add.js translatable using
the new __() function.
To test, apply the patch and confirm that the alert still works
correctly when submitting the subscription edit form with an invalid
vendor id.
Test that the string can be translated (using fr-Fr for example):
1. cd misc/translator && ./translate update fr-FR
2. Translate strings in misc/tranlator/po/fr-FR-messages-js.po
3. cd misc/translator && ./translate install fr-FR
Switch to the fr-FR translation and confirm the the alert shows your
translated string.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Mon, 11 Nov 2019 11:14:50 +0000 (12:14 +0100)]
Bug 23888: Do not allow invalid vendor id on creating a subscription
It will avoid crash and invalid data when creating/updating a
subscription.
This could have been done with a AJAX query but seems more convenient
this way.
Test plan:
- Create or update a subscription
- In the "Vendor" input try an empty string, a valid vendor's id, and
invalid one.
=> With an empty string you get the existing alert message
=> With a valid id you do not get any messages
=> With an invalid id you are not allowed to go to page 2
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Thu, 9 Jan 2020 15:53:45 +0000 (15:53 +0000)]
Bug 24386: Prevent double form submission on adding orders to basket from a file
To test:
1 - Have a marc record file
2 - Go to Acquisitions, find a vendor, then an open basket
3 - Add to basket from a new file (if you already have one staged you can choose that instead)
4 - Import the file, then add to basket
5 - On the page where you select the records and set info select a record, set matching to 'Do not check' fill in the fund for the order
6 - When ready, click save as many times as you can
7 - When you go to the basket there are many copies of the order added
8 - Don't despair, apply the patch
9 - Repeat above
10 - When ready to add orders, click furiously
11 - The order is only added once!
12 - Success!
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 27 Mar 2020 12:12:31 +0000 (12:12 +0000)]
Bug 24883: (RM follow-up) Use Koha::Script
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bernardo Gonzalez Kriegel [Fri, 20 Mar 2020 22:35:29 +0000 (19:35 -0300)]
Bug 24883: Add POD entry and remove unused variable
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 19 Mar 2020 12:09:33 +0000 (13:09 +0100)]
Bug 24883: Move new sub from load_yaml.pl
Use the sub from C4::Installer to avoid dup of code.
Note:
We are going to modify the script and so will do more stuffs.
We may want to rename it, maybe installer_utilities.pl,
misc/installer/yaml_utility.pl, any suggestions?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 19 Mar 2020 11:20:23 +0000 (12:20 +0100)]
Bug 24883: Move to a flat array with all values to an array of arrayref
For the following SQL query:
INSERT INTO cities(city_name, city_country) VALUES ('Madrid', 'Spain'), ('Buenos Aires', 'Argentina');
We move from:
[ 'Madrid', 'Spain', 'Buenos Aires', 'Argentina' ]
to:
[ [ 'Madrid', 'Spain' ], [ 'Buenos Aires', 'Argentina' ] ]
Which make more sense to split, build and construct the queries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 19 Mar 2020 11:05:25 +0000 (12:05 +0100)]
Bug 24883: Centralize code to load YAML installer files to a sub
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bernardo Gonzalez Kriegel [Mon, 16 Mar 2020 21:44:44 +0000 (18:44 -0300)]
Bug 24883: Command line utility to load yaml files
This patch adds a command line utility to load
yaml files.
To test:
1) Apply the patch
2) Try loading a file, e.g. sample notices
a) mysql -e "delete from letter"
b) misc/load_yaml.pl -f installer/data/mysql/en/mandatory/sample_notices.yml
3) Try loading a file with a syntax error,
edit previous file adding ':' at the end of a field without quotes
then load again
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 27 Mar 2020 12:08:54 +0000 (12:08 +0000)]
Bug 23204: (RM follow-up) Use Koha::Script
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 26 Mar 2020 14:15:11 +0000 (15:15 +0100)]
Bug 23204: Adjust copyright and license
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 26 Mar 2020 14:12:25 +0000 (15:12 +0100)]
Bug 23204: Update the mappings.yaml file with the output generated
We need to be consistent and provide the mappings.yaml file generated by
the script.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Wed, 25 Mar 2020 17:10:40 +0000 (17:10 +0000)]
Bug 23204: Fix ordering of fields in exported file
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Tue, 12 Nov 2019 16:15:14 +0000 (17:15 +0100)]
Bug 23204: (follow-up) Also sort by marc field
Test plan :
Launching script several times and see that marc field is alway ordered increasing
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Alex Arnaud [Thu, 3 Oct 2019 07:23:07 +0000 (07:23 +0000)]
Bug 23204: Sort search fields by name
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Alex Arnaud [Tue, 13 Aug 2019 08:41:03 +0000 (10:41 +0200)]
Bug 23204: Add exec permission on the script
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Alex Arnaud [Tue, 6 Aug 2019 08:03:18 +0000 (08:03 +0000)]
Bug 23204: Export field weights
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Alex Arnaud [Tue, 6 Aug 2019 07:45:39 +0000 (07:45 +0000)]
Bug 23204: Move code in a unit tested sub
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Alex Arnaud [Tue, 25 Jun 2019 14:14:19 +0000 (14:14 +0000)]
Bug 23204: Add script for exporting Elasticsearch mappings
Test plan:
- launch perl misc/search_tools/export_elasticsearch_mappings.pl >
/path/to/my_mappings.yaml
- set koha-conf.elasticsearch_index_mappings to
/path/to/my_mappings.yaml,
- go to admin -> Search engine configuration,
- click on "Reset mappins",
- check that your search fields and mappings are as expected
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Ere Maijala [Thu, 20 Feb 2020 14:17:58 +0000 (16:17 +0200)]
Bug 24700: Avoid validating REST API spec multiple times
This patch changes the spec loading so that it is fully loaded and merged with any plugin routes before validation. The individual parts are separately validated only if the resulting complete spec is invalid. Note: the OpenAPI plugin validates the spec given to it, so normally no manual validation is necessary.
Test plan:
1. prove -v t/db_dependent/Koha/REST/*
2. prove -v t/db_dependent/api/v1/*
Sponsored-by: The National Library of Finland
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Thu, 26 Mar 2020 15:14:59 +0000 (11:14 -0400)]
Bug 24982: (follow-up) Retain checkbox selections after for submit
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Thu, 26 Mar 2020 13:49:04 +0000 (09:49 -0400)]
Bug 24982: (follow-up) Move checkboxes to left side of label
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Thu, 26 Mar 2020 12:48:02 +0000 (12:48 +0000)]
Bug 24982: (follow-up) Give checkboxes more structured layout
This patch makes minor markup changes and adds some CSS so that the
module and actions checkboxes are laid out a little more clearly.
The patch includes some whitespace changes, so diff accordingly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Aleisha Amohia [Tue, 24 Mar 2020 16:00:41 +0000 (16:00 +0000)]
Bug 24982: Use checkboxes in Log Viewer
So we can see all options at once, and more easily select more than one
option.
Test plan:
1) Go to Tools -> Log viewer
2) Notice the new checkboxes under Modules, Actions and Interface. 'All'
should be selected by default for all three options
3) Confirm you can deselect 'All' and the other options are enabled.
Confirm selection all of the other options automatically selects 'All'
and disables the options again.
4) Confirm the results still work as expected when clicking 'Submit'
button
Sponsored-by: Catalyst IT
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Mon, 2 Mar 2020 14:36:47 +0000 (09:36 -0500)]
Bug 24765: Updated on date in Claims returned starts off as 12/31/1969
When an item is claimed returned by staff, there is a column called Updated On - this date field column should remain blank until this claimed returned has been updated. Currently, when an item has been claimed returned, the date in the updated column states 12/31/1969. This date only shows up in the display, it is doesn't show up in the database like this.
Test Plan:
1) Enable return claims
2) Make a claim
3) Note the 'updated on' column has the date 1969-12-31
4) Apply this patch
5) Reload the page ( you may need to clear your browser cache )
6) Note the field is now blank
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 27 Mar 2020 11:12:41 +0000 (11:12 +0000)]
Bug 22001: (RM follow-up) Allow RaiseError tests in Reports/Guided.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 14 Dec 2018 16:30:02 +0000 (13:30 -0300)]
Bug 22001: Enable RaiseError for tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 14 Dec 2018 16:30:27 +0000 (13:30 -0300)]
Bug 22001: Add tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 14 Dec 2018 16:30:52 +0000 (13:30 -0300)]
Bug 22001: Remove the RaiseError occurrences from tests
Unless it is needed!
Also remove $dbh when not used later.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 30 Jan 2020 11:26:57 +0000 (12:26 +0100)]
Bug 22685: Use DBIx::Class relationships in Koha::Acq::Bookseller methods
To match PERL15 we change the behavior of Koha::Object methods to make
them use the DBIx::Class relationships.
Test plan:
- Create a vendor, basket and contact
- Edit the vendor => the contact must appears
- Go to the view of a vendor => you cannot delete the vendor, it has
a basket attached
- Create another vendor, without basket
- Go to the view of the vendor => You can delete it
Additionally:
% prove t/db_dependent/Koha/Acquisition/Booksellers.t
must return green
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Roberts [Wed, 25 Mar 2020 21:14:06 +0000 (21:14 +0000)]
Bug 20648: Attribute option 'Display in check-out' should be renamed
This patch rewords the 'Display in check-out' option in the patron
attribute policy
To test:
1) Apply patch
2) Go to /cgi-bin/koha/admin/patron-attr-types.pl?op=add_attribute_type
3) Check that the 8th line down has been renamed to "Display in patron's
brief information:"
4) Check the description of this same option has been changed to "Check
to show this attribute in the brief information panel in the patron's
record (staff client)."
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Thu, 26 Mar 2020 11:41:46 +0000 (07:41 -0400)]
Bug 24475: Cronjobs don't always live in misc
In git installs, cronjobs live in misc, but for package installs, they
live under bin. Let's just still with 'misc/cronjobs' which is always
cromulent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Roberts [Wed, 25 Mar 2020 21:59:22 +0000 (21:59 +0000)]
Bug 24475: Reword FinesMode system preference
This patch changes the wording of the FinesMode and
CalculateFinesOnReturn system preferences explanations
1) Install Patch
2) Check that the wording of the FinesMode system preference has changed
to "NOTE: If the misc/cronjobs/fines.pl cronjob is being run, accruing
and final fines will be calculated when the cron runs and accruing fines
will be finalized when an item is returned. If CalculateFinesOnReturn is
enabled, final fines will be calculated when an item is returned."
3) Check that the wording of the CalculateFinesOnReturn system
preference has changed to add "NOTE: This system preference requires
FinesMode to be set to 'Calculate and charge.'" to the existing note.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Tomas Cohen Arazi [Thu, 19 Mar 2020 13:51:40 +0000 (10:51 -0300)]
Bug 24905: Make installer update log4perl.conf for instances
This patch makes koha-common.postinst check if the log4perl.conf files
on the instances need tweaking. If they do, it appends the relevant
configuration text.
To test:
1. Install Koha 19.11 or earlier using the packages
2. Create an instance:
$ koha-create --create-db test1
$ koha-create --create-db test2
=> FAIL: /etc/koha/sites/test1/log4perl.conf doesn't include an entry for
z39.50
3. Apply this patch and run:
$ docker run \
--volume=/path/to/your/clone:/koha \
--volume=/dest/path/for/debs:/debs \
--privileged
--env VERSION=19.12.00.047 \
koha/koha-dpkg:master
Note: Paths need to be adjusted
4. Grab the .deb files and put them on the machine you're testing this
5. Edit /etc/koha/sites/test2/log4perl.conf and add the following text
at the bottom: log4perl.logger.z3950
6. Install the debs:
$ sudo dpkg -i koha-perldeps koha-deps koha-common
=> SUCCESS: Install process doesn't explode due to the addition
=> SUCCESS: /etc/koha/sites/test1/log4perl.conf has a new entry for log4perl.logger.z3950
=> SUCCESS: /etc/koha/sites/test2/log4perl.conf doesn't have a new entry for log4perl.logger.z3950
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Tomas Cohen Arazi [Thu, 19 Mar 2020 12:47:25 +0000 (09:47 -0300)]
Bug 24905: Add missing entry in log4perl-site.conf.in
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Thu, 26 Mar 2020 13:38:07 +0000 (13:38 +0000)]
Bug 24988: Default to autorenew_checkouts for new patrons
To recreate:
1 - Create a new patron on the staff interface
2 - Note that 'Allow auto-renewal of items' defaults to 'no'
3 - Apply patch
4 - Create another patron
5 - 'Allow auto-renewal of items' defaults to 'yes'
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Thu, 26 Mar 2020 12:53:59 +0000 (08:53 -0400)]
Bug 24964: Fix perl critic warning
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 25 Mar 2020 12:50:45 +0000 (13:50 +0100)]
Bug 24964: Prevent random failures sorting by borrowernumber
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 25 Mar 2020 10:21:15 +0000 (11:21 +0100)]
Bug 24964: Do not filter patrons after they have been fetched
The svc/members/search script is called in different places.
In some places (Set owner for a fund, add users to a fund, or set a
manager to a suggestion), we need patrons to be filtered depending on
the permissions they have.
For instance you can only set a fund's owner with a patron that has
acquisition.order_manage.
Currently we have fetching X (default 20) patrons, then filter them
depending on their permission.
Says you have 3 patrons that have the correct permissions but are not in
the 20 first patrons, if you do not define a search term, the search
result will be empty.
This is not ideal and we should filter when requesting the DB.
Test plan:
- Have more than 20 patrons, remove them their permissions
- Create 3 more:
1 superlibrarian
1 with the full acq permission
1 with acquisition.order_manage
- Create a fund and set a owner
- Search for patrons, without specifying a search term (to get them all)
=> Without this patch the new patrons you created are not displayed
=> With this patch they are!
Same test plan apply to set a manager to a suggestion (freshly pushed,
see bug 23590), with suggestions and suggestions.suggestions_manage
Note: The code has been written that way to rely on
C4::Auth::haspermission, but the SQL query is quite trivial and the gain
is important.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 25 Mar 2020 10:20:20 +0000 (11:20 +0100)]
Bug 24964: Add tests
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Roberts [Wed, 25 Mar 2020 20:52:19 +0000 (20:52 +0000)]
Bug 24976: Guided report - "Save" button on last step is misleading
This patch changes the text of the save button on the final step.
To test:
1) Build a guided report (the selections are immaterial)
2) Note that after you have been through the six stages, the button on
the "Confirm custom report" screen should be labelled "Save"
3) Install patch
4) Repeat Step 1. Note that on the "Confirm custom report" screen, the
button is now labelled "Next".
5) Run the report to check that the functionality still works.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Fri, 27 Mar 2020 07:20:47 +0000 (08:20 +0100)]
Bug 20415: (follow-up) DBRev 19.12.00.056
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Thu, 26 Mar 2020 15:51:54 +0000 (15:51 +0000)]
Bug 13881: (RM followup) Fix incorrect idempotency test
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 26 Mar 2020 15:29:04 +0000 (15:29 +0000)]
Bug 20399: (RM follow-up) Fix update statement
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 26 Mar 2020 12:01:57 +0000 (12:01 +0000)]
Bug 14715: DBRev 19.12.00.058
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Wed, 25 Mar 2020 20:47:40 +0000 (20:47 +0000)]
Bug 14715: (QA follow-up) Remove limit on Zebra
Found in testing that this appears to work well for Elasticsearch -
so removing everything that made this Zebra only.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Wed, 25 Mar 2020 20:08:53 +0000 (20:08 +0000)]
Bug 14715: (QA follow-up) Add missing filters
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Aleisha Amohia [Tue, 25 Feb 2020 20:40:57 +0000 (20:40 +0000)]
Bug 14715: (follow-up) Keep results per page setting when selecting facets and sorting results
Also adding missing filters
ALSO ensuring you can switch back to library default on staff side
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Aleisha Amohia [Tue, 5 Nov 2019 02:53:26 +0000 (02:53 +0000)]
Bug 14715: Results per page dropdown for catalogue search
This patch utilises an unused search facet to handle results shown per
page.
Sponsored-by: Region Halland
Signed-off-by: Gabriel DeCarufel <gabriel@inlibro.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 24 Mar 2020 12:14:21 +0000 (12:14 +0000)]
Bug 16457: (follow-up) Enable click event on dynamically-created elements
This patch moves the click handler for patron attribute actions ("new",
"clear") from the links themselves to the container. This allows jQuery
to correctly target dynamically-created copies of the links.
To test you should have extended patron attributes enabled and you
should have some repeatable attributes defined.
- Create or edit a patron record
- In the "Additional attributes and identifiers" section, test the
"Clear" and "New" links. Confirm that the controls work with both the
original instance of the field and those created by clicking "New."
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 17 Mar 2020 23:57:06 +0000 (23:57 +0000)]
Bug 16457: Remove the use of "onclick" from the patron entry form
This patch removes several event attributes from the patron entry form
and replaces them with event handlers in the <script> block.
Some event attributes were removed altogether because they weren't
functional: Onchange events on jQueryUI datepickers don't work, and they
would have been redundant even if they did work.
To test you should have some patron attributes configured
(Administration -> Patron attribute types). At least one attribute
should be configured to apply to one particular patron category.
Apply the patch and begin the process of adding a new patron.
1. Try to add a patron with details matching a patron which already
exists. You should get a confirmation message on screen which asks if
the patron is a duplicte. Test the link which shows the existing
record. It should trigger a popup window with details about the
patron.
2. Test the process of setting a patron's date of birth. Selecting a
date should trigger the display of the patron's age immedately below
the field.
3. Test that you cannot set a patron's expiration to a date which
precedes the date in the registration date field.
4. Test that you can add a manual restriction's expiration date, and
that the "Clear date" link works correctly.
5. Test that the "clear" and "new" controls links work with additional
attributes and identifiers.
6. Test that changing the patron's category correctly affects the
display of available attributes and identifiers: The attribute you
have associated with a particular patron category should only show if
that category is selected under "Category."
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 26 Mar 2020 11:57:26 +0000 (11:57 +0000)]
Bug 20399: DBRev 19.12.00.057
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Wed, 25 Mar 2020 20:34:46 +0000 (21:34 +0100)]
Bug 20399: (QA follow-up) Remove mention of INTRAdidyoumean from text and delete commented code
Removes some last "remains" of INTRAdidyoumean.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Thu, 19 Mar 2020 14:59:39 +0000 (17:59 +0300)]
Bug 20399: Remove "did you mean" for the staff interface
The amdin page for the "did you mean" feature has two block for setting it up in the staff interface, and a note saying this isn't implemented on the staff interface yet.
We remove the part about the staff interface until it actually is implemented.
Test plan :
1) Apply patch
2) Go to Administration > Did you mean?
3) See there is only the OPAC block
4) Change some checkboxes
5) Save configuration
6) Check that configuration is saved
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 26 Mar 2020 11:54:44 +0000 (11:54 +0000)]
Bug 20415: DBRev 19.12.00.056
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Wed, 25 Mar 2020 13:27:30 +0000 (09:27 -0400)]
Bug 20415: Add POD
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Thu, 19 Mar 2020 14:22:30 +0000 (17:22 +0300)]
Bug 20415: Remove UseKohaPlugins system preference
Owen Leonard 2018-03-16 10:47:47 UTC :
<<
I don't think the system preference adds any security. There are already multiple permissions required for working with plugins:
- Configure plugins
- Manage plugins ( install / uninstall )
- Use report plugins
- Use tool plugins
And even with those permissions your server must be configured to allow the use of plugins.
>>
Test plan :
1) Install kitchen sink plugin https://github.com/bywatersolutions/koha-plugin-kitchen-sink
2) Run misc/devel/install_plugins.pl
3) Set config enable_plugins=1
4) Check all parts of the plugin are working
5) Set config enable_plugins=0
6) Check all parts of the plugin are disabled
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Thu, 19 Mar 2020 14:01:13 +0000 (17:01 +0300)]
Bug 20415: add Koha.ArePluginsEnabled Template Toolkit method
In order to remove UseKohaPlugins syspref, adds to Koha Template Toolkit
plugin a method ArePluginsEnabled().
Test plan:
1) Set syspref UseKohaPlugins enabled
2) Set config enable_plugins=1
3) Check you see "Tool plugins" in "Tools" home page and menu
4) Check you see "Manage plugins" in "Koha administration" home page
5) Check you see "Report plugins" in "Reports" home page and menu
6) Set config enable_plugins=0
7) Check you don't see in 3) 4) 5)
8) Run prove t/Koha_Template_Plugin_Koha.t
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 11 Feb 2020 16:21:38 +0000 (17:21 +0100)]
Bug 24614: Use Koha::Reports from save_report and update_sql
In order to get the default value defined at DBMS level, we use
Koha::Reports (to inherit from Koha::Object->store) from the 2 add/edit
methods of C4::Reports::Guided.
A second step would be to remove completely those CRUD subroutines and
use directly Koha::Reports instead.
Test plan:
1. Add and edit some reports
2. Disable memcached, create a report, edit it
=> Should not crash
3. Make sure the tests make sense and that they pass after the second
patch.
The error was:
DBD::mysql::db do failed: Column 'cache_expiry' cannot be null [for
Statement "UPDATE saved_sql SET savedsql = ?, last_modified = now(),
report_name = ?, report_group = ?, report_subgroup = ?, notes = ?,
cache_expiry = ?, public = ? WHERE id = ? "] at
/kohadevbox/koha/C4/Reports/Guided.pm line 633.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Tue, 11 Feb 2020 16:21:15 +0000 (17:21 +0100)]
Bug 24614: Add tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Mon, 9 Mar 2020 13:33:54 +0000 (09:33 -0400)]
Bug 24829: ClaimReturnedWarningThreshold is always triggered if patron has one or more claims
ClaimReturnedWarningThreshold is supposed to display a warning if a patron has more than the number of claims specified in the system preference. Currently the warning is displayed for any number of claims over zero.
Test Plan:
1) Make 3 return claims for a patron
2) Set ClaimReturnedWarningThreshold to 4
3) Note the claims warning displays for the patron on circulation.pl
4) Apply this patch
5) Reload circulation.pl, the warning should go away
6) Set ClaimReturnedWarningThreshold to 2
7) Reload the page, the warning should reappear
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Mon, 23 Mar 2020 20:10:15 +0000 (20:10 +0000)]
Bug 24959: Fix id/label pairs in saved reports table
This patch adds a unique id attribute to each checkbox in the table of
saved reports. Also updated is the corresponding <label>'s "for"
attribute so that clicking the report id will toggle the checkbox.
To reproduce, go to Reports -> Use saved and click a number in the ID
column. Nothing happens.
After applying the patch clicking the number should check or uncheck the
corresponding checkbox.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok, no errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>